THREAD_EXITED,
};
-static enum thread_state main_thread_state = THREAD_STOPPED;
-static int main_thread_executing = 0;
+extern struct thread_info*
+inferior_thread (void)
+{
+ struct thread_info *tp = find_thread_pid (inferior_ptid);
+ gdb_assert (tp);
+ return tp;
+}
void
-delete_step_resume_breakpoint (void *arg)
+delete_step_resume_breakpoint (struct thread_info *tp)
{
- struct breakpoint **breakpointp = (struct breakpoint **) arg;
- struct thread_info *tp;
-
- if (*breakpointp != NULL)
+ if (tp && tp->step_resume_breakpoint)
{
- delete_breakpoint (*breakpointp);
- for (tp = thread_list; tp; tp = tp->next)
- if (tp->step_resume_breakpoint == *breakpointp)
- tp->step_resume_breakpoint = NULL;
-
- *breakpointp = NULL;
+ delete_breakpoint (tp->step_resume_breakpoint);
+ tp->step_resume_breakpoint = NULL;
}
}
}
bpstat_clear (&tp->stop_bpstat);
+
+ discard_all_intermediate_continuations_thread (tp);
+ discard_all_continuations_thread (tp);
}
static void
struct thread_info *tp, *tpnext;
highest_thread_num = 0;
- main_thread_state = THREAD_STOPPED;
- main_thread_executing = 0;
if (!thread_list)
return;
one. */
{
/* In addition to deleting the thread, if this is the current
- thread, then we need to also get rid of the current infrun
- context, and take care that delete_thread doesn't really
- delete the thread if it is inferior_ptid. Create a new
- template thread in the list with an invalid ptid, context
- switch to it, delete the original thread, reset the new
- thread's ptid, and switch to it. */
+ thread, then we need to take care that delete_thread doesn't
+ really delete the thread if it is inferior_ptid. Create a
+ new template thread in the list with an invalid ptid, switch
+ to it, delete the original thread, reset the new thread's
+ ptid, and switch to it. */
if (ptid_equal (inferior_ptid, ptid))
{
tp->num = ++highest_thread_num;
tp->next = thread_list;
thread_list = tp;
- context_switch_to (minus_one_ptid);
+
+ /* Make switch_to_thread not read from the thread. */
+ tp->state_ = THREAD_EXITED;
+ switch_to_thread (minus_one_ptid);
/* Now we can delete it. */
delete_thread (ptid);
- /* Since the context is already set to this new thread,
- reset its ptid, and reswitch inferior_ptid to it. */
+ /* Now reset its ptid, and reswitch inferior_ptid to it. */
tp->ptid = ptid;
+ tp->state_ = THREAD_STOPPED;
switch_to_thread (ptid);
observer_notify_new_thread (tp);
return GDB_RC_OK;
}
-/* Load infrun state for the thread PID. */
-
-void
-load_infrun_state (ptid_t ptid,
- CORE_ADDR *prev_pc,
- int *trap_expected,
- struct breakpoint **step_resume_breakpoint,
- CORE_ADDR *step_range_start,
- CORE_ADDR *step_range_end,
- struct frame_id *step_frame_id,
- int *stepping_over_breakpoint,
- int *stepping_through_solib_after_catch,
- bpstat *stepping_through_solib_catchpoints,
- int *current_line,
- struct symtab **current_symtab,
- struct continuation **continuations,
- struct continuation **intermediate_continuations,
- int *proceed_to_finish,
- enum step_over_calls_kind *step_over_calls,
- int *stop_step,
- int *step_multi,
- enum target_signal *stop_signal,
- bpstat *stop_bpstat)
-{
- struct thread_info *tp;
-
- /* If we can't find the thread, then we're debugging a single threaded
- process. No need to do anything in that case. */
- tp = find_thread_id (pid_to_thread_id (ptid));
- if (tp == NULL)
- return;
-
- *prev_pc = tp->prev_pc;
- *trap_expected = tp->trap_expected;
- *step_resume_breakpoint = tp->step_resume_breakpoint;
- *step_range_start = tp->step_range_start;
- *step_range_end = tp->step_range_end;
- *step_frame_id = tp->step_frame_id;
- *stepping_over_breakpoint = tp->stepping_over_breakpoint;
- *stepping_through_solib_after_catch =
- tp->stepping_through_solib_after_catch;
- *stepping_through_solib_catchpoints =
- tp->stepping_through_solib_catchpoints;
- *current_line = tp->current_line;
- *current_symtab = tp->current_symtab;
-
- /* In all-stop mode, these are global state, while in non-stop mode,
- they are per thread. */
- if (non_stop)
- {
- *continuations = tp->continuations;
- tp->continuations = NULL;
- *intermediate_continuations = tp->intermediate_continuations;
- tp->intermediate_continuations = NULL;
- *proceed_to_finish = tp->proceed_to_finish;
- *step_over_calls = tp->step_over_calls;
- *stop_step = tp->stop_step;
- *step_multi = tp->step_multi;
- *stop_signal = tp->stop_signal;
-
- /* Swap instead of copy, so we only have to update one of
- them. */
- *stop_bpstat = tp->stop_bpstat;
- tp->stop_bpstat = 0;
- }
-}
-
-/* Save infrun state for the thread PID. */
-
-void
-save_infrun_state (ptid_t ptid,
- CORE_ADDR prev_pc,
- int trap_expected,
- struct breakpoint *step_resume_breakpoint,
- CORE_ADDR step_range_start,
- CORE_ADDR step_range_end,
- const struct frame_id *step_frame_id,
- int stepping_over_breakpoint,
- int stepping_through_solib_after_catch,
- bpstat stepping_through_solib_catchpoints,
- int current_line,
- struct symtab *current_symtab,
- struct continuation *continuations,
- struct continuation *intermediate_continuations,
- int proceed_to_finish,
- enum step_over_calls_kind step_over_calls,
- int stop_step,
- int step_multi,
- enum target_signal stop_signal,
- bpstat stop_bpstat)
-{
- struct thread_info *tp;
-
- /* If we can't find the thread, then we're debugging a single-threaded
- process. Nothing to do in that case. */
- tp = find_thread_id (pid_to_thread_id (ptid));
- if (tp == NULL)
- return;
-
- tp->prev_pc = prev_pc;
- tp->trap_expected = trap_expected;
- tp->step_resume_breakpoint = step_resume_breakpoint;
- tp->step_range_start = step_range_start;
- tp->step_range_end = step_range_end;
- tp->step_frame_id = (*step_frame_id);
- tp->stepping_over_breakpoint = stepping_over_breakpoint;
- tp->stepping_through_solib_after_catch = stepping_through_solib_after_catch;
- tp->stepping_through_solib_catchpoints = stepping_through_solib_catchpoints;
- tp->current_line = current_line;
- tp->current_symtab = current_symtab;
-
- /* In all-stop mode, these are global state, while in non-stop mode,
- they are per thread. */
- if (non_stop)
- {
- tp->continuations = continuations;
- tp->intermediate_continuations = intermediate_continuations;
- tp->proceed_to_finish = proceed_to_finish;
- tp->step_over_calls = step_over_calls;
- tp->stop_step = stop_step;
- tp->step_multi = step_multi;
- tp->stop_signal = stop_signal;
- tp->stop_bpstat = stop_bpstat;
- }
-}
-
/* Return true if TP is an active thread. */
static int
thread_alive (struct thread_info *tp)
}
void
-set_running (ptid_t ptid, int running)
+thread_change_ptid (ptid_t old_ptid, ptid_t new_ptid)
{
+ struct inferior *inf;
struct thread_info *tp;
- if (!thread_list)
- {
- /* This is one of the targets that does not add main
- thread to the thread list. Just use a single
- global flag to indicate that a thread is running.
-
- This problem is unique to ST programs. For MT programs,
- the main thread is always present in the thread list. If it's
- not, the first call to context_switch will mess up GDB internal
- state. */
- if (running
- && main_thread_state != THREAD_RUNNING
- && !suppress_resume_observer)
- observer_notify_target_resumed (ptid);
- main_thread_state = running ? THREAD_RUNNING : THREAD_STOPPED;
- return;
- }
+ /* It can happen that what we knew as the target inferior id
+ changes. E.g, target remote may only discover the remote process
+ pid after adding the inferior to GDB's list. */
+ inf = find_inferior_pid (ptid_get_pid (old_ptid));
+ inf->pid = ptid_get_pid (new_ptid);
+
+ tp = find_thread_pid (old_ptid);
+ tp->ptid = new_ptid;
+
+ observer_notify_thread_ptid_changed (old_ptid, new_ptid);
+}
+
+void
+set_running (ptid_t ptid, int running)
+{
+ struct thread_info *tp;
/* We try not to notify the observer if no thread has actually changed
the running state -- merely to reduce the number of messages to
if (!target_has_execution)
return 0;
- if (!thread_list)
- return main_thread_state == state;
-
tp = find_thread_pid (ptid);
gdb_assert (tp);
return tp->state_ == state;
if (!target_has_execution)
return 0;
- if (!thread_list)
- return main_thread_state == THREAD_RUNNING;
-
for (tp = thread_list; tp; tp = tp->next)
if (tp->state_ == THREAD_RUNNING)
return 1;
if (!target_has_execution)
return 0;
- if (!thread_list)
- return main_thread_executing;
-
tp = find_thread_pid (ptid);
gdb_assert (tp);
return tp->executing_;
{
struct thread_info *tp;
- if (!thread_list)
- {
- /* This target does not add the main thread to the thread list.
- Use a global flag to indicate that the thread is
- executing. */
- main_thread_executing = executing;
- return;
- }
-
if (PIDGET (ptid) == -1)
{
for (tp = thread_list; tp; tp = tp->next)
}
}
+void
+set_stop_requested (ptid_t ptid, int stop)
+{
+ struct thread_info *tp;
+ int all = ptid_equal (ptid, minus_one_ptid);
+
+ if (all || ptid_is_pid (ptid))
+ {
+ for (tp = thread_list; tp; tp = tp->next)
+ if (all || ptid_get_pid (tp->ptid) == ptid_get_pid (ptid))
+ tp->stop_requested = stop;
+ }
+ else
+ {
+ tp = find_thread_pid (ptid);
+ gdb_assert (tp);
+ tp->stop_requested = stop;
+ }
+
+ /* Call the stop requested observer so other components of GDB can
+ react to this request. */
+ if (stop)
+ observer_notify_thread_stop_requested (ptid);
+}
+
/* Prints the list of threads and their details on UIOUT.
This is a version of 'info_thread_command' suitable for
use from MI.
ui_out_text (uiout, " ");
ui_out_field_string (uiout, "target-id", target_tid_to_str (tp->ptid));
- if (tp->state_ != THREAD_EXITED)
+ extra_info = target_extra_thread_info (tp);
+ if (extra_info)
{
- extra_info = target_extra_thread_info (tp);
- if (extra_info)
- {
- ui_out_text (uiout, " (");
- ui_out_field_string (uiout, "details", extra_info);
- ui_out_text (uiout, ")");
- }
- ui_out_text (uiout, " ");
+ ui_out_text (uiout, " (");
+ ui_out_field_string (uiout, "details", extra_info);
+ ui_out_text (uiout, ")");
}
+ ui_out_text (uiout, " ");
if (tp->state_ == THREAD_RUNNING)
ui_out_text (uiout, "(running)\n");
if (ui_out_is_mi_like_p (uiout))
{
char *state = "stopped";
- if (tp->state_ == THREAD_EXITED)
- state = "exited";
- else if (tp->state_ == THREAD_RUNNING)
+ if (tp->state_ == THREAD_RUNNING)
state = "running";
ui_out_field_string (uiout, "state", state);
}
static void
restore_current_thread (ptid_t ptid)
{
- if (!ptid_equal (ptid, inferior_ptid))
- {
- if (non_stop)
- context_switch_to (ptid);
- else
- switch_to_thread (ptid);
- }
+ switch_to_thread (ptid);
}
static void
for (tp = thread_list; tp; tp = tp->next)
if (thread_alive (tp))
{
- if (non_stop)
- context_switch_to (tp->ptid);
- else
- switch_to_thread (tp->ptid);
+ switch_to_thread (tp->ptid);
printf_filtered (_("\nThread %d (%s):\n"),
tp->num, target_tid_to_str (inferior_ptid));
warning (_("Thread %d has terminated."), start);
else
{
- if (non_stop)
- context_switch_to (tp->ptid);
- else
- switch_to_thread (tp->ptid);
+ switch_to_thread (tp->ptid);
printf_filtered (_("\nThread %d (%s):\n"), tp->num,
target_tid_to_str (inferior_ptid));
if (!thread_alive (tp))
error (_("Thread ID %d has terminated."), num);
- if (non_stop)
- context_switch_to (tp->ptid);
- else
- switch_to_thread (tp->ptid);
+ switch_to_thread (tp->ptid);
ui_out_text (uiout, "[Switching to thread ");
ui_out_field_int (uiout, "new-thread-id", pid_to_thread_id (inferior_ptid));