#include "inferior.h"
#include "breakpoint.h"
#include "tracepoint.h"
-#include "remote.h"
-extern int remote_supports_cond_tracepoints (void);
-extern char *unpack_varlen_hex (char *buff, ULONGEST *result);
#include "linespec.h"
#include "regcache.h"
#include "completer.h"
#include "valprint.h"
#include "gdbcore.h"
#include "objfiles.h"
+#include "filenames.h"
+#include "gdbthread.h"
#include "ax.h"
#include "ax-gdb.h"
#include <unistd.h>
#endif
+#ifndef O_LARGEFILE
+#define O_LARGEFILE 0
+#endif
+
+extern int hex2bin (const char *hex, gdb_byte *bin, int count);
+extern int bin2hex (const gdb_byte *bin, char *hex, int count);
+
+extern void stop_tracing ();
+
/* Maximum length of an agent aexpression.
This accounts for the fact that packets are limited to 400 bytes
(which includes everything -- including the checksum), and assumes
static struct cmd_list_element *tfindlist;
/* List of expressions to collect by default at each tracepoint hit. */
-static char *default_collect = "";
+char *default_collect = "";
+
+static int disconnected_tracing;
-static char *target_buf;
-static long target_buf_size;
-
/* ======= Important command functions: ======= */
static void trace_actions_command (char *, int);
static void trace_start_command (char *, int);
static void trace_find_line_command (char *, int);
static void trace_find_range_command (char *, int);
static void trace_find_outside_command (char *, int);
-static void tracepoint_save_command (char *, int);
static void trace_dump_command (char *, int);
/* support routines */
static void add_register (struct collection_list *collection,
unsigned int regno);
static struct cleanup *make_cleanup_free_actions (struct breakpoint *t);
-static void free_actions_list (char **actions_list);
-static void free_actions_list_cleanup_wrapper (void *);
+
+extern void send_disconnected_tracing_value (int value);
+
+static void free_uploaded_tps (struct uploaded_tp **utpp);
+static void free_uploaded_tsvs (struct uploaded_tsv **utsvp);
+
extern void _initialize_tracepoint (void);
-/* Utility: returns true if "target remote" */
-static int
-target_is_remote (void)
-{
- if (current_target.to_shortname &&
- (strcmp (current_target.to_shortname, "remote") == 0
- || strcmp (current_target.to_shortname, "extended-remote") == 0))
- return 1;
- else
- return 0;
-}
+static struct trace_status trace_status;
-/* Utility: generate error from an incoming stub packet. */
-static void
-trace_error (char *buf)
-{
- if (*buf++ != 'E')
- return; /* not an error msg */
- switch (*buf)
- {
- case '1': /* malformed packet error */
- if (*++buf == '0') /* general case: */
- error (_("tracepoint.c: error in outgoing packet."));
- else
- error (_("tracepoint.c: error in outgoing packet at field #%ld."),
- strtol (buf, NULL, 16));
- case '2':
- error (_("trace API error 0x%s."), ++buf);
- default:
- error (_("Target returns error code '%s'."), buf);
- }
-}
+char *stop_reason_names[] = {
+ "tunknown",
+ "tnotrun",
+ "tstop",
+ "tfull",
+ "tdisconnected",
+ "tpasscount"
+};
-/* Utility: wait for reply from stub, while accepting "O" packets. */
-static char *
-remote_get_noisy_reply (char **buf_p,
- long *sizeof_buf)
+struct trace_status *
+current_trace_status ()
{
- do /* Loop on reply from remote stub. */
- {
- char *buf;
- QUIT; /* allow user to bail out with ^C */
- getpkt (buf_p, sizeof_buf, 0);
- buf = *buf_p;
- if (buf[0] == 0)
- error (_("Target does not support this command."));
- else if (buf[0] == 'E')
- trace_error (buf);
- else if (buf[0] == 'O' &&
- buf[1] != 'K')
- remote_console_output (buf + 1); /* 'O' message from stub */
- else
- return buf; /* here's the actual reply */
- }
- while (1);
+ return &trace_status;
}
/* Set traceframe number to NUM. */
char *reply;
ULONGEST tval;
- if (target_is_remote ())
- {
- char buf[20];
-
- for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
- {
- /* We don't know anything about the value until we get a
- valid packet. */
- tsv->value_known = 0;
- sprintf (buf, "qTV:%x", tsv->number);
- putpkt (buf);
- reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (reply && *reply)
- {
- if (*reply == 'V')
- {
- unpack_varlen_hex (reply + 1, &tval);
- tsv->value = (LONGEST) tval;
- tsv->value_known = 1;
- }
- /* FIXME say anything about oddball replies? */
- }
- }
- }
-
if (VEC_length (tsv_s, tvariables) == 0)
{
printf_filtered (_("No trace state variables.\n"));
return;
}
+ /* Try to acquire values from the target. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ tsv->value_known = target_get_trace_state_variable_value (tsv->number,
+ &(tsv->value));
+
printf_filtered (_("Name\t\t Initial\tCurrent\n"));
for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
print_spaces_filtered (11 - strlen (plongest (tsv->initial_value)), gdb_stdout);
if (tsv->value_known)
printf_filtered (" %s", plongest (tsv->value));
- else if (trace_running_p || traceframe_number >= 0)
+ else if (current_trace_status ()->running || traceframe_number >= 0)
/* The value is/was defined, but we don't have it. */
printf_filtered (_(" <unknown>"));
else
struct cmd_list_element *c;
struct expression *exp = NULL;
struct cleanup *old_chain = NULL;
- char *p;
+ char *p, *tmp_p;
+ struct bp_location *loc;
/* if EOF is typed, *line is NULL */
if (*line == NULL)
}
/* else fall thru, treat p as an expression and parse it! */
}
- exp = parse_exp_1 (&p, block_for_pc (t->loc->address), 1);
- old_chain = make_cleanup (free_current_contents, &exp);
-
- if (exp->elts[0].opcode == OP_VAR_VALUE)
+ tmp_p = p;
+ for (loc = t->loc; loc; loc = loc->next)
{
- if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
- {
- warning (_("constant %s (value %ld) will not be collected."),
- SYMBOL_PRINT_NAME (exp->elts[2].symbol),
- SYMBOL_VALUE (exp->elts[2].symbol));
- return BADLINE;
- }
- else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
+ p = tmp_p;
+ exp = parse_exp_1 (&p, block_for_pc (loc->address), 1);
+ old_chain = make_cleanup (free_current_contents, &exp);
+
+ if (exp->elts[0].opcode == OP_VAR_VALUE)
{
- warning (_("%s is optimized away and cannot be collected."),
- SYMBOL_PRINT_NAME (exp->elts[2].symbol));
- return BADLINE;
+ if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
+ {
+ warning (_("constant %s (value %ld) will not be collected."),
+ SYMBOL_PRINT_NAME (exp->elts[2].symbol),
+ SYMBOL_VALUE (exp->elts[2].symbol));
+ return BADLINE;
+ }
+ else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
+ {
+ warning (_("%s is optimized away and cannot be collected."),
+ SYMBOL_PRINT_NAME (exp->elts[2].symbol));
+ return BADLINE;
+ }
}
- }
- /* We have something to collect, make sure that the expr to
- bytecode translator can handle it and that it's not too
- long. */
- aexpr = gen_trace_for_expr (t->loc->address, exp);
- make_cleanup_free_agent_expr (aexpr);
+ /* We have something to collect, make sure that the expr to
+ bytecode translator can handle it and that it's not too
+ long. */
+ aexpr = gen_trace_for_expr (loc->address, exp);
+ make_cleanup_free_agent_expr (aexpr);
- if (aexpr->len > MAX_AGENT_EXPR_LEN)
- error (_("expression too complicated, try simplifying"));
+ if (aexpr->len > MAX_AGENT_EXPR_LEN)
+ error (_("expression too complicated, try simplifying"));
- ax_reqs (aexpr, &areqs);
- (void) make_cleanup (xfree, areqs.reg_mask);
+ ax_reqs (aexpr, &areqs);
+ (void) make_cleanup (xfree, areqs.reg_mask);
- if (areqs.flaw != agent_flaw_none)
- error (_("malformed expression"));
+ if (areqs.flaw != agent_flaw_none)
+ error (_("malformed expression"));
- if (areqs.min_height < 0)
- error (_("gdb: Internal error: expression has min height < 0"));
+ if (areqs.min_height < 0)
+ error (_("gdb: Internal error: expression has min height < 0"));
- if (areqs.max_height > 20)
- error (_("expression too complicated, try simplifying"));
+ if (areqs.max_height > 20)
+ error (_("expression too complicated, try simplifying"));
- do_cleanups (old_chain);
+ do_cleanups (old_chain);
+ }
}
while (p && *p++ == ',');
return GENERIC;
while (isspace ((int) *p))
p++;
- /* Only expressions are allowed for this action. */
- exp = parse_exp_1 (&p, block_for_pc (t->loc->address), 1);
- old_chain = make_cleanup (free_current_contents, &exp);
+ tmp_p = p;
+ for (loc = t->loc; loc; loc = loc->next)
+ {
+ p = tmp_p;
+ /* Only expressions are allowed for this action. */
+ exp = parse_exp_1 (&p, block_for_pc (loc->address), 1);
+ old_chain = make_cleanup (free_current_contents, &exp);
- /* We have something to evaluate, make sure that the expr to
- bytecode translator can handle it and that it's not too
- long. */
- aexpr = gen_eval_for_expr (t->loc->address, exp);
- make_cleanup_free_agent_expr (aexpr);
+ /* We have something to evaluate, make sure that the expr to
+ bytecode translator can handle it and that it's not too
+ long. */
+ aexpr = gen_eval_for_expr (loc->address, exp);
+ make_cleanup_free_agent_expr (aexpr);
- if (aexpr->len > MAX_AGENT_EXPR_LEN)
- error (_("expression too complicated, try simplifying"));
+ if (aexpr->len > MAX_AGENT_EXPR_LEN)
+ error (_("expression too complicated, try simplifying"));
- do_cleanups (old_chain);
+ do_cleanups (old_chain);
+ }
}
while (p && *p++ == ',');
return GENERIC;
return *str_list;
}
-static void
-free_actions_list_cleanup_wrapper (void *al)
-{
- free_actions_list (al);
-}
-
-static void
-free_actions_list (char **actions_list)
-{
- int ndx;
-
- if (actions_list == 0)
- return;
-
- for (ndx = 0; actions_list[ndx]; ndx++)
- xfree (actions_list[ndx]);
-
- xfree (actions_list);
-}
-
/* Render all actions into gdb protocol. */
-static void
-encode_actions (struct breakpoint *t, char ***tdp_actions,
- char ***stepping_actions)
+/*static*/ void
+encode_actions (struct breakpoint *t, struct bp_location *tloc,
+ char ***tdp_actions, char ***stepping_actions)
{
static char tdp_buff[2048], step_buff[2048];
char *action_exp;
*stepping_actions = NULL;
gdbarch_virtual_frame_pointer (t->gdbarch,
- t->loc->address, &frame_reg, &frame_offset);
+ tloc->address, &frame_reg, &frame_offset);
action = t->actions;
{
add_local_symbols (collect,
t->gdbarch,
- t->loc->address,
+ tloc->address,
frame_reg,
frame_offset,
'A');
{
add_local_symbols (collect,
t->gdbarch,
- t->loc->address,
+ tloc->address,
frame_reg,
frame_offset,
'L');
struct agent_reqs areqs;
exp = parse_exp_1 (&action_exp,
- block_for_pc (t->loc->address), 1);
+ block_for_pc (tloc->address), 1);
old_chain = make_cleanup (free_current_contents, &exp);
switch (exp->elts[0].opcode)
t->gdbarch,
frame_reg,
frame_offset,
- t->loc->address);
+ tloc->address);
break;
default: /* full-fledged expression */
- aexpr = gen_trace_for_expr (t->loc->address, exp);
+ aexpr = gen_trace_for_expr (tloc->address, exp);
old_chain1 = make_cleanup_free_agent_expr (aexpr);
struct agent_reqs areqs;
exp = parse_exp_1 (&action_exp,
- block_for_pc (t->loc->address), 1);
+ block_for_pc (tloc->address), 1);
old_chain = make_cleanup (free_current_contents, &exp);
- aexpr = gen_eval_for_expr (t->loc->address, exp);
+ aexpr = gen_eval_for_expr (tloc->address, exp);
old_chain1 = make_cleanup_free_agent_expr (aexpr);
ax_reqs (aexpr, &areqs);
collect->next_aexpr_elt++;
}
-/* Set "transparent" memory ranges
-
- Allow trace mechanism to treat text-like sections
- (and perhaps all read-only sections) transparently,
- i.e. don't reject memory requests from these address ranges
- just because they haven't been collected. */
-
-static void
-remote_set_transparent_ranges (void)
-{
- asection *s;
- bfd_size_type size;
- bfd_vma lma;
- int anysecs = 0;
-
- if (!exec_bfd)
- return; /* No information to give. */
-
- strcpy (target_buf, "QTro");
- for (s = exec_bfd->sections; s; s = s->next)
- {
- char tmp1[40], tmp2[40];
-
- if ((s->flags & SEC_LOAD) == 0 ||
- /* (s->flags & SEC_CODE) == 0 || */
- (s->flags & SEC_READONLY) == 0)
- continue;
-
- anysecs = 1;
- lma = s->lma;
- size = bfd_get_section_size (s);
- sprintf_vma (tmp1, lma);
- sprintf_vma (tmp2, lma + size);
- sprintf (target_buf + strlen (target_buf),
- ":%s,%s", tmp1, tmp2);
- }
- if (anysecs)
- {
- putpkt (target_buf);
- getpkt (&target_buf, &target_buf_size, 0);
- }
-}
-
/* tstart command:
Tell target to clear any previous trace experiment.
to the target. If no errors,
Tell target to start a new trace experiment. */
-void download_tracepoint (struct breakpoint *t);
-
static void
trace_start_command (char *args, int from_tty)
{
int ix;
struct breakpoint *t;
struct trace_state_variable *tsv;
+ int any_downloaded = 0;
dont_repeat (); /* Like "run", dangerous to repeat accidentally. */
- if (target_is_remote ())
+ target_trace_init ();
+
+ tp_vec = all_tracepoints ();
+ for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
{
- putpkt ("QTinit");
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Target does not support this command."));
-
- tp_vec = all_tracepoints ();
- for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
- {
- download_tracepoint (t);
- }
- VEC_free (breakpoint_p, tp_vec);
-
- /* Init any trace state variables that start with nonzero values. */
-
- for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
- {
- if (tsv->initial_value != 0)
- {
- sprintf (buf, "QTDV:%x:%s",
- tsv->number, phex ((ULONGEST) tsv->initial_value, 8));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- }
- }
+ t->number_on_target = 0;
+ target_download_tracepoint (t);
+ t->number_on_target = t->number;
+ any_downloaded = 1;
+ }
+ VEC_free (breakpoint_p, tp_vec);
+
+ /* No point in tracing without any tracepoints... */
+ if (!any_downloaded)
+ error ("No tracepoints downloaded, not starting trace");
+
+ /* Send down all the trace state variables too. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ {
+ target_download_trace_state_variable (tsv);
+ }
+
+ /* Tell target to treat text-like sections as transparent. */
+ target_trace_set_readonly_regions ();
- /* Tell target to treat text-like sections as transparent. */
- remote_set_transparent_ranges ();
- /* Now insert traps and begin collecting data. */
- putpkt ("QTStart");
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Bogus reply from target: %s"), target_buf);
- set_traceframe_num (-1); /* All old traceframes invalidated. */
- set_tracepoint_num (-1);
- set_traceframe_context (NULL);
- trace_running_p = 1;
- if (deprecated_trace_start_stop_hook)
- deprecated_trace_start_stop_hook (1, from_tty);
+ /* Now insert traps and begin collecting data. */
+ target_trace_start ();
- }
- else
- error (_("Trace can only be run on remote targets."));
+ /* Reset our local state. */
+ set_traceframe_num (-1);
+ set_tracepoint_num (-1);
+ set_traceframe_context (NULL);
+ current_trace_status()->running = 1;
}
-/* Send the definition of a single tracepoint to the target. */
+/* tstop command */
+static void
+trace_stop_command (char *args, int from_tty)
+{
+ stop_tracing ();
+}
void
-download_tracepoint (struct breakpoint *t)
+stop_tracing ()
{
- char tmp[40];
- char buf[2048];
- char **tdp_actions;
- char **stepping_actions;
- int ndx;
- struct cleanup *old_chain = NULL;
- struct agent_expr *aexpr;
- struct cleanup *aexpr_chain = NULL;
-
- sprintf_vma (tmp, (t->loc ? t->loc->address : 0));
- sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number,
- tmp, /* address */
- (t->enable_state == bp_enabled ? 'E' : 'D'),
- t->step_count, t->pass_count);
- /* If the tracepoint has a conditional, make it into an agent
- expression and append to the definition. */
- if (t->loc->cond)
- {
- /* Only test support at download time, we may not know target
- capabilities at definition time. */
- if (remote_supports_cond_tracepoints ())
- {
- aexpr = gen_eval_for_expr (t->loc->address, t->loc->cond);
- aexpr_chain = make_cleanup_free_agent_expr (aexpr);
- sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
- mem2hex (aexpr->buf, buf + strlen (buf), aexpr->len);
- do_cleanups (aexpr_chain);
- }
- else
- warning (_("Target does not support conditional tracepoints, ignoring tp %d cond"), t->number);
- }
-
- if (t->actions || *default_collect)
- strcat (buf, "-");
- putpkt (buf);
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Target does not support tracepoints."));
-
- if (!t->actions && !*default_collect)
- return;
+ target_trace_stop ();
+ /* should change in response to reply? */
+ current_trace_status ()->running = 0;
+}
- encode_actions (t, &tdp_actions, &stepping_actions);
- old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
- tdp_actions);
- (void) make_cleanup (free_actions_list_cleanup_wrapper, stepping_actions);
+/* tstatus command */
+static void
+trace_status_command (char *args, int from_tty)
+{
+ struct trace_status *ts = current_trace_status ();
+ int status;
+
+ status = target_get_trace_status (ts);
- /* do_single_steps (t); */
- if (tdp_actions)
+ if (status == -1)
{
- for (ndx = 0; tdp_actions[ndx]; ndx++)
+ if (ts->from_file)
+ printf_filtered (_("Using a trace file.\n"));
+ else
{
- QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%s:%s%c",
- t->number, tmp, /* address */
- tdp_actions[ndx],
- ((tdp_actions[ndx + 1] || stepping_actions)
- ? '-' : 0));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf,
- &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
+ printf_filtered (_("Trace can not be run on this target.\n"));
+ return;
}
}
- if (stepping_actions)
+
+ if (!ts->running_known)
+ {
+ printf_filtered (_("Run/stop status is unknown.\n"));
+ }
+ else if (ts->running)
+ {
+ printf_filtered (_("Trace is running on the target.\n"));
+ if (disconnected_tracing)
+ printf_filtered (_("Trace will continue if GDB disconnects.\n"));
+ else
+ printf_filtered (_("Trace will stop if GDB disconnects.\n"));
+ }
+ else
{
- for (ndx = 0; stepping_actions[ndx]; ndx++)
+ switch (ts->stop_reason)
{
- QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%s:%s%s%s",
- t->number, tmp, /* address */
- ((ndx == 0) ? "S" : ""),
- stepping_actions[ndx],
- (stepping_actions[ndx + 1] ? "-" : ""));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf,
- &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
+ case trace_never_run:
+ printf_filtered (_("No trace has been run on the target.\n"));
+ break;
+ case tstop_command:
+ printf_filtered (_("Trace stopped by a tstop command.\n"));
+ break;
+ case trace_buffer_full:
+ printf_filtered (_("Trace stopped because the buffer was full.\n"));
+ break;
+ case trace_disconnected:
+ printf_filtered (_("Trace stopped because of disconnection.\n"));
+ break;
+ case tracepoint_passcount:
+ /* FIXME account for number on target */
+ printf_filtered (_("Trace stopped by tracepoint %d.\n"),
+ ts->stopping_tracepoint);
+ break;
+ case trace_stop_reason_unknown:
+ printf_filtered (_("Trace stopped for an unknown reason.\n"));
+ break;
+ default:
+ printf_filtered (_("Trace stopped for some other reason (%d).\n"),
+ ts->stop_reason);
+ break;
}
}
- do_cleanups (old_chain);
-}
-/* tstop command */
-static void
-trace_stop_command (char *args, int from_tty)
-{
- if (target_is_remote ())
+ if (ts->traceframe_count >= 0)
{
- putpkt ("QTStop");
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Bogus reply from target: %s"), target_buf);
- trace_running_p = 0;
- if (deprecated_trace_start_stop_hook)
- deprecated_trace_start_stop_hook (0, from_tty);
+ printf_filtered (_("Collected %d trace frames.\n"),
+ ts->traceframe_count);
}
+
+ if (ts->buffer_free)
+ {
+ printf_filtered (_("Trace buffer has %llu bytes free.\n"),
+ ts->buffer_free);
+ }
+
+ /* Now report on what we're doing with tfind. */
+ if (traceframe_number >= 0)
+ printf_filtered (_("Looking at trace frame %d, tracepoint %d.\n"),
+ traceframe_number, tracepoint_number);
else
- error (_("Trace can only be run on remote targets."));
+ printf_filtered (_("Not looking at any trace frame.\n"));
}
-unsigned long trace_running_p;
-
-/* tstatus command */
-static void
-trace_status_command (char *args, int from_tty)
+void
+disconnect_or_stop_tracing (int from_tty)
{
- if (target_is_remote ())
+ /* It can happen that the target that was tracing went away on its
+ own, and we didn't notice. Get a status update, and if the
+ current target doesn't even do tracing, then assume it's not
+ running anymore. */
+ if (target_get_trace_status (current_trace_status ()) < 0)
+ current_trace_status ()->running = 0;
+
+ if (current_trace_status ()->running && from_tty)
{
- putpkt ("qTStatus");
- remote_get_noisy_reply (&target_buf, &target_buf_size);
-
- if (target_buf[0] != 'T' ||
- (target_buf[1] != '0' && target_buf[1] != '1'))
- error (_("Bogus reply from target: %s"), target_buf);
-
- /* exported for use by the GUI */
- trace_running_p = (target_buf[1] == '1');
-
- if (trace_running_p)
- printf_filtered (_("Trace is running on the target.\n"));
- else
- printf_filtered (_("Trace is not running on the target.\n"));
-
- if (traceframe_number >= 0)
- printf_filtered (_("Looking at trace frame %d, tracepoint %d.\n"),
- traceframe_number, tracepoint_number);
- else
- printf_filtered (_("Not looking at any trace frame.\n"));
-
+ int cont = query (_("Trace is running. Continue tracing after detach? "));
+ /* Note that we send the query result without affecting the
+ user's setting of disconnected_tracing, so that the answer is
+ a one-time-only. */
+ send_disconnected_tracing_value (cont);
+
+ /* Also ensure that we do the equivalent of a tstop command if
+ tracing is not to continue after the detach. */
+ if (!cont)
+ stop_tracing ();
}
- else
- error (_("Trace can only be run on remote targets."));
}
/* Worker function for the various flavors of the tfind command. */
static void
-finish_tfind_command (char **msg,
- long *sizeof_msg,
+finish_tfind_command (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2,
int from_tty)
{
int target_frameno = -1, target_tracept = -1;
struct frame_id old_frame_id;
char *reply;
+ struct breakpoint *tp;
old_frame_id = get_frame_id (get_current_frame ());
- putpkt (*msg);
- reply = remote_get_noisy_reply (msg, sizeof_msg);
-
- while (reply && *reply)
- switch (*reply)
- {
- case 'F':
- if ((target_frameno = (int) strtol (++reply, &reply, 16)) == -1)
- {
- /* A request for a non-existant trace frame has failed.
- Our response will be different, depending on FROM_TTY:
-
- If FROM_TTY is true, meaning that this command was
- typed interactively by the user, then give an error
- and DO NOT change the state of traceframe_number etc.
-
- However if FROM_TTY is false, meaning that we're either
- in a script, a loop, or a user-defined command, then
- DON'T give an error, but DO change the state of
- traceframe_number etc. to invalid.
-
- The rationalle is that if you typed the command, you
- might just have committed a typo or something, and you'd
- like to NOT lose your current debugging state. However
- if you're in a user-defined command or especially in a
- loop, then you need a way to detect that the command
- failed WITHOUT aborting. This allows you to write
- scripts that search thru the trace buffer until the end,
- and then continue on to do something else. */
-
- if (from_tty)
- error (_("Target failed to find requested trace frame."));
- else
- {
- if (info_verbose)
- printf_filtered ("End of trace buffer.\n");
- /* The following will not recurse, since it's
- special-cased. */
- trace_find_command ("-1", from_tty);
- reply = NULL; /* Break out of loop
- (avoid recursive nonsense). */
- }
- }
- break;
- case 'T':
- if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
- error (_("Target failed to find requested trace frame."));
- break;
- case 'O': /* "OK"? */
- if (reply[1] == 'K' && reply[2] == '\0')
- reply += 2;
- else
- error (_("Bogus reply from target: %s"), reply);
- break;
- default:
- error (_("Bogus reply from target: %s"), reply);
- }
+ target_frameno = target_trace_find (type, num, addr1, addr2,
+ &target_tracept);
+
+ if (type == tfind_number
+ && num == -1
+ && target_frameno == -1)
+ {
+ /* We told the target to get out of tfind mode, and it did. */
+ }
+ else if (target_frameno == -1)
+ {
+ /* A request for a non-existant trace frame has failed.
+ Our response will be different, depending on FROM_TTY:
+
+ If FROM_TTY is true, meaning that this command was
+ typed interactively by the user, then give an error
+ and DO NOT change the state of traceframe_number etc.
+
+ However if FROM_TTY is false, meaning that we're either
+ in a script, a loop, or a user-defined command, then
+ DON'T give an error, but DO change the state of
+ traceframe_number etc. to invalid.
+
+ The rationalle is that if you typed the command, you
+ might just have committed a typo or something, and you'd
+ like to NOT lose your current debugging state. However
+ if you're in a user-defined command or especially in a
+ loop, then you need a way to detect that the command
+ failed WITHOUT aborting. This allows you to write
+ scripts that search thru the trace buffer until the end,
+ and then continue on to do something else. */
+
+ if (from_tty)
+ error (_("Target failed to find requested trace frame."));
+ else
+ {
+ if (info_verbose)
+ printf_filtered ("End of trace buffer.\n");
+#if 0 /* dubious now? */
+ /* The following will not recurse, since it's
+ special-cased. */
+ trace_find_command ("-1", from_tty);
+#endif
+ }
+ }
+
+ tp = get_tracepoint_by_number_on_target (target_tracept);
reinit_frame_cache ();
registers_changed ();
+ target_dcache_invalidate ();
set_traceframe_num (target_frameno);
- set_tracepoint_num (target_tracept);
+ set_tracepoint_num (tp ? tp->number : target_tracept);
if (target_frameno == -1)
set_traceframe_context (NULL);
else
set_traceframe_context (get_current_frame ());
- if (from_tty)
+ /* If we're in nonstop mode and getting out of looking at trace
+ frames, there won't be any current frame to go back to and
+ display. */
+ if (from_tty
+ && (has_stack_frames () || traceframe_number >= 0))
{
enum print_what print_what;
{ /* this should only be called with a numeric argument */
int frameno = -1;
- if (target_is_remote ())
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
+
+ if (args == 0 || *args == 0)
+ { /* TFIND with no args means find NEXT trace frame. */
+ if (traceframe_number == -1)
+ frameno = 0; /* "next" is first one */
+ else
+ frameno = traceframe_number + 1;
+ }
+ else if (0 == strcmp (args, "-"))
{
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
-
- if (deprecated_trace_find_hook)
- deprecated_trace_find_hook (args, from_tty);
-
- if (args == 0 || *args == 0)
- { /* TFIND with no args means find NEXT trace frame. */
- if (traceframe_number == -1)
- frameno = 0; /* "next" is first one */
- else
- frameno = traceframe_number + 1;
- }
- else if (0 == strcmp (args, "-"))
- {
- if (traceframe_number == -1)
- error (_("not debugging trace buffer"));
- else if (from_tty && traceframe_number == 0)
- error (_("already at start of trace buffer"));
-
- frameno = traceframe_number - 1;
- }
- else
- frameno = parse_and_eval_long (args);
+ if (traceframe_number == -1)
+ error (_("not debugging trace buffer"));
+ else if (from_tty && traceframe_number == 0)
+ error (_("already at start of trace buffer"));
+
+ frameno = traceframe_number - 1;
+ }
+ /* A hack to work around eval's need for fp to have been collected. */
+ else if (0 == strcmp (args, "-1"))
+ frameno = -1;
+ else
+ frameno = parse_and_eval_long (args);
- if (frameno < -1)
- error (_("invalid input (%d is less than zero)"), frameno);
+ if (frameno < -1)
+ error (_("invalid input (%d is less than zero)"), frameno);
- sprintf (target_buf, "QTFrame:%x", frameno);
- finish_tfind_command (&target_buf, &target_buf_size, from_tty);
- }
- else
- error (_("Trace can only be run on remote targets."));
+ finish_tfind_command (tfind_number, frameno, 0, 0, from_tty);
}
/* tfind end */
CORE_ADDR pc;
char tmp[40];
- if (target_is_remote ())
- {
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
-
- if (args == 0 || *args == 0)
- pc = regcache_read_pc (get_current_regcache ());
- else
- pc = parse_and_eval_address (args);
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- sprintf_vma (tmp, pc);
- sprintf (target_buf, "QTFrame:pc:%s", tmp);
- finish_tfind_command (&target_buf, &target_buf_size, from_tty);
- }
+ if (args == 0 || *args == 0)
+ pc = regcache_read_pc (get_current_regcache ());
else
- error (_("Trace can only be run on remote targets."));
+ pc = parse_and_eval_address (args);
+
+ finish_tfind_command (tfind_pc, 0, pc, 0, from_tty);
}
/* tfind tracepoint command */
trace_find_tracepoint_command (char *args, int from_tty)
{
int tdp;
+ struct breakpoint *tp;
- if (target_is_remote ())
- {
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- if (args == 0 || *args == 0)
- {
- if (tracepoint_number == -1)
- error (_("No current tracepoint -- please supply an argument."));
- else
- tdp = tracepoint_number; /* default is current TDP */
- }
+ if (args == 0 || *args == 0)
+ {
+ if (tracepoint_number == -1)
+ error (_("No current tracepoint -- please supply an argument."));
else
- tdp = parse_and_eval_long (args);
-
- sprintf (target_buf, "QTFrame:tdp:%x", tdp);
- finish_tfind_command (&target_buf, &target_buf_size, from_tty);
+ tdp = tracepoint_number; /* default is current TDP */
}
else
- error (_("Trace can only be run on remote targets."));
+ tdp = parse_and_eval_long (args);
+
+ /* If we have the tracepoint on hand, use the number that the
+ target knows about (which may be different if we disconnected
+ and reconnected). */
+ tp = get_tracepoint (tdp);
+ if (tp)
+ tdp = tp->number_on_target;
+
+ finish_tfind_command (tfind_tp, tdp, 0, 0, from_tty);
}
/* TFIND LINE command:
struct cleanup *old_chain;
char startpc_str[40], endpc_str[40];
- if (target_is_remote ())
- {
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
-
- if (args == 0 || *args == 0)
- {
- sal = find_pc_line (get_frame_pc (get_current_frame ()), 0);
- sals.nelts = 1;
- sals.sals = (struct symtab_and_line *)
- xmalloc (sizeof (struct symtab_and_line));
- sals.sals[0] = sal;
- }
- else
- {
- sals = decode_line_spec (args, 1);
- sal = sals.sals[0];
- }
-
- old_chain = make_cleanup (xfree, sals.sals);
- if (sal.symtab == 0)
- {
- struct gdbarch *gdbarch = get_current_arch ();
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- printf_filtered ("TFIND: No line number information available");
- if (sal.pc != 0)
- {
- /* This is useful for "info line *0x7f34". If we can't
- tell the user about a source line, at least let them
- have the symbolic address. */
- printf_filtered (" for address ");
- wrap_here (" ");
- print_address (gdbarch, sal.pc, gdb_stdout);
- printf_filtered (";\n -- will attempt to find by PC. \n");
- }
- else
- {
- printf_filtered (".\n");
- return; /* No line, no PC; what can we do? */
- }
- }
- else if (sal.line > 0
- && find_line_pc_range (sal, &start_pc, &end_pc))
+ if (args == 0 || *args == 0)
+ {
+ sal = find_pc_line (get_frame_pc (get_current_frame ()), 0);
+ sals.nelts = 1;
+ sals.sals = (struct symtab_and_line *)
+ xmalloc (sizeof (struct symtab_and_line));
+ sals.sals[0] = sal;
+ }
+ else
+ {
+ sals = decode_line_spec (args, 1);
+ sal = sals.sals[0];
+ }
+
+ old_chain = make_cleanup (xfree, sals.sals);
+ if (sal.symtab == 0)
+ {
+ printf_filtered ("TFIND: No line number information available");
+ if (sal.pc != 0)
{
- struct gdbarch *gdbarch = get_objfile_arch (sal.symtab->objfile);
-
- if (start_pc == end_pc)
- {
- printf_filtered ("Line %d of \"%s\"",
- sal.line, sal.symtab->filename);
- wrap_here (" ");
- printf_filtered (" is at address ");
- print_address (gdbarch, start_pc, gdb_stdout);
- wrap_here (" ");
- printf_filtered (" but contains no code.\n");
- sal = find_pc_line (start_pc, 0);
- if (sal.line > 0 &&
- find_line_pc_range (sal, &start_pc, &end_pc) &&
- start_pc != end_pc)
- printf_filtered ("Attempting to find line %d instead.\n",
- sal.line);
- else
- error (_("Cannot find a good line."));
- }
- }
- else
- /* Is there any case in which we get here, and have an address
- which the user would want to see? If we have debugging
- symbols and no line numbers? */
- error (_("Line number %d is out of range for \"%s\"."),
- sal.line, sal.symtab->filename);
-
- sprintf_vma (startpc_str, start_pc);
- sprintf_vma (endpc_str, end_pc - 1);
- /* Find within range of stated line. */
- if (args && *args)
- sprintf (target_buf, "QTFrame:range:%s:%s",
- startpc_str, endpc_str);
- /* Find OUTSIDE OF range of CURRENT line. */
- else
- sprintf (target_buf, "QTFrame:outside:%s:%s",
- startpc_str, endpc_str);
- finish_tfind_command (&target_buf, &target_buf_size,
- from_tty);
- do_cleanups (old_chain);
+ /* This is useful for "info line *0x7f34". If we can't
+ tell the user about a source line, at least let them
+ have the symbolic address. */
+ printf_filtered (" for address ");
+ wrap_here (" ");
+ print_address (get_current_arch (), sal.pc, gdb_stdout);
+ printf_filtered (";\n -- will attempt to find by PC. \n");
+ }
+ else
+ {
+ printf_filtered (".\n");
+ return; /* No line, no PC; what can we do? */
+ }
}
+ else if (sal.line > 0
+ && find_line_pc_range (sal, &start_pc, &end_pc))
+ {
+ if (start_pc == end_pc)
+ {
+ printf_filtered ("Line %d of \"%s\"",
+ sal.line, sal.symtab->filename);
+ wrap_here (" ");
+ printf_filtered (" is at address ");
+ print_address (get_current_arch (), start_pc, gdb_stdout);
+ wrap_here (" ");
+ printf_filtered (" but contains no code.\n");
+ sal = find_pc_line (start_pc, 0);
+ if (sal.line > 0
+ && find_line_pc_range (sal, &start_pc, &end_pc)
+ && start_pc != end_pc)
+ printf_filtered ("Attempting to find line %d instead.\n",
+ sal.line);
+ else
+ error (_("Cannot find a good line."));
+ }
+ }
+ else
+ /* Is there any case in which we get here, and have an address
+ which the user would want to see? If we have debugging
+ symbols and no line numbers? */
+ error (_("Line number %d is out of range for \"%s\"."),
+ sal.line, sal.symtab->filename);
+
+ /* Find within range of stated line. */
+ if (args && *args)
+ finish_tfind_command (tfind_range, 0, start_pc, end_pc - 1, from_tty);
else
- error (_("Trace can only be run on remote targets."));
+ finish_tfind_command (tfind_outside, 0, start_pc, end_pc - 1, from_tty);
+ do_cleanups (old_chain);
}
/* tfind range command */
char start_str[40], stop_str[40];
char *tmp;
- if (target_is_remote ())
- {
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
- printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
- return;
- }
+ if (args == 0 || *args == 0)
+ { /* XXX FIXME: what should default behavior be? */
+ printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
+ return;
+ }
- if (0 != (tmp = strchr (args, ',')))
- {
- *tmp++ = '\0'; /* terminate start address */
- while (isspace ((int) *tmp))
- tmp++;
- start = parse_and_eval_address (args);
- stop = parse_and_eval_address (tmp);
- }
- else
- { /* no explicit end address? */
- start = parse_and_eval_address (args);
- stop = start + 1; /* ??? */
- }
-
- sprintf_vma (start_str, start);
- sprintf_vma (stop_str, stop);
- sprintf (target_buf, "QTFrame:range:%s:%s", start_str, stop_str);
- finish_tfind_command (&target_buf, &target_buf_size, from_tty);
+ if (0 != (tmp = strchr (args, ',')))
+ {
+ *tmp++ = '\0'; /* terminate start address */
+ while (isspace ((int) *tmp))
+ tmp++;
+ start = parse_and_eval_address (args);
+ stop = parse_and_eval_address (tmp);
}
else
- error (_("Trace can only be run on remote targets."));
+ { /* no explicit end address? */
+ start = parse_and_eval_address (args);
+ stop = start + 1; /* ??? */
+ }
+
+ finish_tfind_command (tfind_range, 0, start, stop, from_tty);
}
/* tfind outside command */
char start_str[40], stop_str[40];
char *tmp;
- if (target_is_remote ())
- {
- if (trace_running_p)
- error ("May not look at trace frames while trace is running.");
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
- printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
- return;
- }
-
- if (0 != (tmp = strchr (args, ',')))
- {
- *tmp++ = '\0'; /* terminate start address */
- while (isspace ((int) *tmp))
- tmp++;
- start = parse_and_eval_address (args);
- stop = parse_and_eval_address (tmp);
- }
- else
- { /* no explicit end address? */
- start = parse_and_eval_address (args);
- stop = start + 1; /* ??? */
- }
+ if (args == 0 || *args == 0)
+ { /* XXX FIXME: what should default behavior be? */
+ printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
+ return;
+ }
- sprintf_vma (start_str, start);
- sprintf_vma (stop_str, stop);
- sprintf (target_buf, "QTFrame:outside:%s:%s", start_str, stop_str);
- finish_tfind_command (&target_buf, &target_buf_size, from_tty);
+ if (0 != (tmp = strchr (args, ',')))
+ {
+ *tmp++ = '\0'; /* terminate start address */
+ while (isspace ((int) *tmp))
+ tmp++;
+ start = parse_and_eval_address (args);
+ stop = parse_and_eval_address (tmp);
}
else
- error (_("Trace can only be run on remote targets."));
+ { /* no explicit end address? */
+ start = parse_and_eval_address (args);
+ stop = start + 1; /* ??? */
+ }
+
+ finish_tfind_command (tfind_outside, 0, start, stop, from_tty);
}
/* info scope command: list the locals for a scope. */
struct cleanup *old_cleanups;
int stepping_actions = 0;
int stepping_frame = 0;
-
- if (!target_is_remote ())
- {
- error (_("Trace can only be run on remote targets."));
- return;
- }
+ struct bp_location *loc;
if (tracepoint_number == -1)
{
regcache = get_current_regcache ();
gdbarch = get_regcache_arch (regcache);
- stepping_frame = (t->loc->address != (regcache_read_pc (regcache)
- - gdbarch_decr_pc_after_break (gdbarch)));
+ /* If the traceframe's address matches any of the tracepoint's
+ locations, assume it is a direct hit rather than a while-stepping
+ frame. (FIXME this is not reliable, should record each frame's
+ type.) */
+ stepping_frame = 1;
+ for (loc = t->loc; loc; loc = loc->next)
+ if (loc->address == regcache_read_pc (regcache))
+ stepping_frame = 0;
for (action = t->actions; action; action = action->next)
{
discard_cleanups (old_cleanups);
}
+extern int trace_regblock_size;
+
+static void
+trace_save_command (char *args, int from_tty)
+{
+ char **argv;
+ char *filename = NULL, *pathname;
+ int target_does_save = 0;
+ struct cleanup *cleanup;
+ struct trace_status *ts = current_trace_status ();
+ int err, status;
+ FILE *fp;
+ struct uploaded_tp *uploaded_tps = NULL, *utp;
+ struct uploaded_tsv *uploaded_tsvs = NULL, *utsv;
+ int a;
+ LONGEST gotten = 0;
+ ULONGEST offset = 0;
+#define MAX_TRACE_UPLOAD 2000
+ gdb_byte buf[MAX_TRACE_UPLOAD];
+ int written;
+
+ if (args == NULL)
+ error_no_arg (_("file in which to save trace data"));
+
+ argv = gdb_buildargv (args);
+ make_cleanup_freeargv (argv);
+
+ for (; *argv; ++argv)
+ {
+ if (strcmp (*argv, "-r") == 0)
+ target_does_save = 1;
+ else if (**argv == '-')
+ error (_("unknown option `%s'"), *argv);
+ else
+ filename = *argv;
+ }
+
+ if (!filename)
+ error_no_arg (_("file in which to save trace data"));
+
+ /* If the target is to save the data to a file on its own, then just
+ send the command and be done with it. */
+ if (target_does_save)
+ {
+ err = target_save_trace_data (filename);
+ if (err < 0)
+ error (_("Target failed to save trace data to '%s'."),
+ filename);
+ return;
+ }
+
+ /* Get the trace status first before opening the file, so if the
+ target is losing, we can get out without touching files. */
+ status = target_get_trace_status (ts);
+
+ pathname = tilde_expand (args);
+ cleanup = make_cleanup (xfree, pathname);
+
+ fp = fopen (pathname, "w");
+ if (!fp)
+ error (_("Unable to open file '%s' for saving trace data (%s)"),
+ args, safe_strerror (errno));
+ make_cleanup_fclose (fp);
+
+ /* Write a file header, with a high-bit-set char to indicate a
+ binary file, plus a hint as what this file is, and a version
+ number in case of future needs. */
+ written = fwrite ("\x7fTRACE0\n", 8, 1, fp);
+ if (written < 8)
+ perror_with_name (pathname);
+
+ /* Write descriptive info. */
+
+ /* Write out the size of a register block. */
+ fprintf (fp, "R %x\n", trace_regblock_size);
+
+ /* Write out status of the tracing run (aka "tstatus" info). */
+ fprintf (fp, "status %c;%s:%x;tframes:%x;tfree:%llx\n",
+ (ts->running ? '1' : '0'),
+ stop_reason_names[ts->stop_reason], ts->stopping_tracepoint,
+ ts->traceframe_count, ts->buffer_free);
+
+ /* Note that we want to upload tracepoints and save those, rather
+ than simply writing out the local ones, because the user may have
+ changed tracepoints in GDB in preparation for a future tracing
+ run, or maybe just mass-deleted all types of breakpoints as part
+ of cleaning up. So as not to contaminate the session, leave the
+ data in its uploaded form, don't make into real tracepoints. */
+
+ /* Get trace state variables first, they may be checked when parsing
+ uploaded commands. */
+
+ target_upload_trace_state_variables (&uploaded_tsvs);
+
+ for (utsv = uploaded_tsvs; utsv; utsv = utsv->next)
+ {
+ char *buf = "";
+
+ if (utsv->name)
+ {
+ buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
+ bin2hex ((gdb_byte *) (utsv->name), buf, 0);
+ }
+
+ fprintf (fp, "tsv %x:%s:%x:%s\n",
+ utsv->number, phex_nz (utsv->initial_value, 8),
+ utsv->builtin, buf);
+
+ if (utsv->name)
+ xfree (buf);
+ }
+
+ free_uploaded_tsvs (&uploaded_tsvs);
+
+ target_upload_tracepoints (&uploaded_tps);
+
+ for (utp = uploaded_tps; utp; utp = utp->next)
+ {
+ fprintf (fp, "tp T%x:%s:%c:%x:%x",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
+ if (utp->type == bp_fast_tracepoint)
+ fprintf (fp, ":F%x", utp->orig_size);
+ if (utp->cond)
+ fprintf (fp, ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
+ utp->cond);
+ fprintf (fp, "\n");
+ for (a = 0; a < utp->numactions; ++a)
+ fprintf (fp, "tp A%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ utp->actions[a]);
+ for (a = 0; a < utp->num_step_actions; ++a)
+ fprintf (fp, "tp S%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ utp->step_actions[a]);
+ }
+
+ free_uploaded_tps (&uploaded_tps);
+
+ /* Mark the end of the definition section. */
+ fprintf (fp, "\n");
+
+ /* Get and write the trace data proper. We ask for big blocks, in
+ the hopes of efficiency, but will take less if the target has
+ packet size limitations or some such. */
+ while (1)
+ {
+ gotten = target_get_raw_trace_data (buf, offset, MAX_TRACE_UPLOAD);
+ if (gotten < 0)
+ error (_("Failure to get requested trace buffer data"));
+ /* No more data is forthcoming, we're done. */
+ if (gotten == 0)
+ break;
+ written = fwrite (buf, gotten, 1, fp);
+ if (written < gotten)
+ perror_with_name (pathname);
+ offset += gotten;
+ }
+
+ /* Mark the end of trace data. */
+ written = fwrite (&gotten, 4, 1, fp);
+ if (written < 4)
+ perror_with_name (pathname);
+
+ do_cleanups (cleanup);
+ if (from_tty)
+ printf_filtered (_("Trace data saved to file '%s'.\n"), args);
+}
+
+/* Tell the target what to do with an ongoing tracing run if GDB
+ disconnects for some reason. */
+
+void
+send_disconnected_tracing_value (int value)
+{
+ target_set_disconnected_tracing (value);
+}
+
+static void
+set_disconnected_tracing (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ send_disconnected_tracing_value (disconnected_tracing);
+}
+
/* Convert the memory pointed to by mem into hex, placing result in buf.
* Return a pointer to the last char put in buf (null)
* "stolen" from sparc-stub.c
return traceframe_number;
}
+/* Make the traceframe NUM be the current trace frame. Does nothing
+ if NUM is already current. */
+
+void
+set_traceframe_number (int num)
+{
+ int newnum;
+
+ if (traceframe_number == num)
+ {
+ /* Nothing to do. */
+ return;
+ }
+
+ newnum = target_trace_find (tfind_number, num, 0, 0, NULL);
+
+ if (newnum != num)
+ warning (_("could not change traceframe"));
+
+ traceframe_number = newnum;
+
+ /* Changing the traceframe changes our view of registers and of the
+ frame chain. */
+ registers_changed ();
+}
+
+/* A cleanup used when switching away and back from tfind mode. */
+
+struct current_traceframe_cleanup
+{
+ /* The traceframe we were inspecting. */
+ int traceframe_number;
+};
+
+static void
+do_restore_current_traceframe_cleanup (void *arg)
+{
+ struct current_traceframe_cleanup *old = arg;
+
+ set_traceframe_number (old->traceframe_number);
+}
+
+static void
+restore_current_traceframe_cleanup_dtor (void *arg)
+{
+ struct current_traceframe_cleanup *old = arg;
+
+ xfree (old);
+}
+
+struct cleanup *
+make_cleanup_restore_current_traceframe (void)
+{
+ struct current_traceframe_cleanup *old;
+
+ old = xmalloc (sizeof (struct current_traceframe_cleanup));
+ old->traceframe_number = traceframe_number;
+
+ return make_cleanup_dtor (do_restore_current_traceframe_cleanup, old,
+ restore_current_traceframe_cleanup_dtor);
+}
+
+/* Given a number and address, return an uploaded tracepoint with that
+ number, creating if necessary. */
+
+struct uploaded_tp *
+get_uploaded_tp (int num, ULONGEST addr, struct uploaded_tp **utpp)
+{
+ struct uploaded_tp *utp;
+
+ for (utp = *utpp; utp; utp = utp->next)
+ if (utp->number == num && utp->addr == addr)
+ return utp;
+ utp = (struct uploaded_tp *) xmalloc (sizeof (struct uploaded_tp));
+ memset (utp, 0, sizeof (struct uploaded_tp));
+ utp->number = num;
+ utp->addr = addr;
+ utp->next = *utpp;
+ *utpp = utp;
+ return utp;
+}
+
+static void
+free_uploaded_tps (struct uploaded_tp **utpp)
+{
+ struct uploaded_tp *next_one;
+
+ while (*utpp)
+ {
+ next_one = (*utpp)->next;
+ xfree (*utpp);
+ *utpp = next_one;
+ }
+}
+
+/* Given a number and address, return an uploaded tracepoint with that
+ number, creating if necessary. */
+
+struct uploaded_tsv *
+get_uploaded_tsv (int num, struct uploaded_tsv **utsvp)
+{
+ struct uploaded_tsv *utsv;
+
+ for (utsv = *utsvp; utsv; utsv = utsv->next)
+ if (utsv->number == num)
+ return utsv;
+ utsv = (struct uploaded_tsv *) xmalloc (sizeof (struct uploaded_tsv));
+ memset (utsv, 0, sizeof (struct uploaded_tsv));
+ utsv->number = num;
+ utsv->next = *utsvp;
+ *utsvp = utsv;
+ return utsv;
+}
+
+static void
+free_uploaded_tsvs (struct uploaded_tsv **utsvp)
+{
+ struct uploaded_tsv *next_one;
+
+ while (*utsvp)
+ {
+ next_one = (*utsvp)->next;
+ xfree (*utsvp);
+ *utsvp = next_one;
+ }
+}
+
+/* Look for an existing tracepoint that seems similar enough to the
+ uploaded one. Enablement isn't compared, because the user can
+ toggle that freely, and may have done so in anticipation of the
+ next trace run. */
+
+struct breakpoint *
+find_matching_tracepoint (struct uploaded_tp *utp)
+{
+ VEC(breakpoint_p) *tp_vec = all_tracepoints ();
+ int ix;
+ struct breakpoint *t;
+ struct bp_location *loc;
+
+ for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
+ {
+ if (t->type == utp->type
+ && t->step_count == utp->step
+ && t->pass_count == utp->pass
+ /* FIXME also test conditionals and actions */
+ )
+ {
+ /* Scan the locations for an address match. */
+ for (loc = t->loc; loc; loc = loc->next)
+ {
+ if (loc->address == utp->addr)
+ return t;
+ }
+ }
+ }
+ return NULL;
+}
+
+/* Given a list of tracepoints uploaded from a target, attempt to
+ match them up with existing tracepoints, and create new ones if not
+ found. */
+
+void
+merge_uploaded_tracepoints (struct uploaded_tp **uploaded_tps)
+{
+ struct uploaded_tp *utp;
+ struct breakpoint *t;
+
+ /* Look for GDB tracepoints that match up with our uploaded versions. */
+ for (utp = *uploaded_tps; utp; utp = utp->next)
+ {
+ t = find_matching_tracepoint (utp);
+ if (t)
+ printf_filtered (_("Assuming tracepoint %d is same as target's tracepoint %d at %s.\n"),
+ t->number, utp->number, paddress (get_current_arch (), utp->addr));
+ else
+ {
+ t = create_tracepoint_from_upload (utp);
+ if (t)
+ printf_filtered (_("Created tracepoint %d for target's tracepoint %d at %s.\n"),
+ t->number, utp->number, paddress (get_current_arch (), utp->addr));
+ else
+ printf_filtered (_("Failed to create tracepoint for target's tracepoint %d at %s, skipping it.\n"),
+ utp->number, paddress (get_current_arch (), utp->addr));
+ }
+ /* Whether found or created, record the number used by the
+ target, to help with mapping target tracepoints back to their
+ counterparts here. */
+ if (t)
+ t->number_on_target = utp->number;
+ }
+
+ free_uploaded_tps (uploaded_tps);
+}
+
+/* Trace state variables don't have much to identify them beyond their
+ name, so just use that to detect matches. */
+
+struct trace_state_variable *
+find_matching_tsv (struct uploaded_tsv *utsv)
+{
+ if (!utsv->name)
+ return NULL;
+
+ return find_trace_state_variable (utsv->name);
+}
+
+struct trace_state_variable *
+create_tsv_from_upload (struct uploaded_tsv *utsv)
+{
+ const char *namebase;
+ char buf[20];
+ int try_num = 0;
+ struct trace_state_variable *tsv;
+
+ if (utsv->name)
+ {
+ namebase = utsv->name;
+ sprintf (buf, "%s", namebase);
+ }
+ else
+ {
+ namebase = "__tsv";
+ sprintf (buf, "%s_%d", namebase, try_num++);
+ }
+
+ /* Fish for a name that is not in use. */
+ /* (should check against all internal vars?) */
+ while (find_trace_state_variable (buf))
+ sprintf (buf, "%s_%d", namebase, try_num++);
+
+ /* We have an available name, create the variable. */
+ tsv = create_trace_state_variable (xstrdup (buf));
+ tsv->initial_value = utsv->initial_value;
+ tsv->builtin = utsv->builtin;
+
+ return tsv;
+}
+
+/* Given a list of uploaded trace state variables, try to match them
+ up with existing variables, or create additional ones. */
+
+void
+merge_uploaded_trace_state_variables (struct uploaded_tsv **uploaded_tsvs)
+{
+ int ix;
+ struct uploaded_tsv *utsv;
+ struct trace_state_variable *tsv;
+ int highest;
+
+ /* Most likely some numbers will have to be reassigned as part of
+ the merge, so clear them all in anticipation. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ tsv->number = 0;
+
+ for (utsv = *uploaded_tsvs; utsv; utsv = utsv->next)
+ {
+ tsv = find_matching_tsv (utsv);
+ if (tsv)
+ printf_filtered (_("Assuming trace state variable $%s is same as target's variable %d.\n"),
+ tsv->name, utsv->number);
+ else
+ {
+ tsv = create_tsv_from_upload (utsv);
+ printf_filtered (_("Created trace state variable $%s for target's variable %d.\n"),
+ tsv->name, utsv->number);
+ }
+ /* Give precedence to numberings that come from the target. */
+ if (tsv)
+ tsv->number = utsv->number;
+ }
+
+ /* Renumber everything that didn't get a target-assigned number. */
+ highest = 0;
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (tsv->number > highest)
+ highest = tsv->number;
+
+ ++highest;
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (tsv->number == 0)
+ tsv->number = highest++;
+
+ free_uploaded_tsvs (uploaded_tsvs);
+}
+
+/* target tfile command */
+
+struct target_ops tfile_ops;
+
+/* Fill in tfile_ops with its defined operations and properties. */
+
+#define TRACE_HEADER_SIZE 8
+
+char *trace_filename;
+int trace_fd = -1;
+off_t trace_frames_offset;
+off_t cur_offset;
+int cur_data_size;
+int trace_regblock_size;
+
+static void tfile_interp_line (char *line,
+ struct uploaded_tp **utpp,
+ struct uploaded_tsv **utsvp);
+
+static void
+tfile_open (char *filename, int from_tty)
+{
+ char *temp;
+ struct cleanup *old_chain;
+ int flags;
+ int scratch_chan;
+ char header[TRACE_HEADER_SIZE];
+ char linebuf[1000]; /* should be max remote packet size or so */
+ char byte;
+ int bytes, i, gotten;
+ struct trace_status *ts;
+ struct uploaded_tp *uploaded_tps = NULL;
+ struct uploaded_tsv *uploaded_tsvs = NULL;
+
+ target_preopen (from_tty);
+ if (!filename)
+ error (_("No trace file specified."));
+
+ filename = tilde_expand (filename);
+ if (!IS_ABSOLUTE_PATH(filename))
+ {
+ temp = concat (current_directory, "/", filename, (char *)NULL);
+ xfree (filename);
+ filename = temp;
+ }
+
+ old_chain = make_cleanup (xfree, filename);
+
+ flags = O_BINARY | O_LARGEFILE;
+ flags |= O_RDONLY;
+ scratch_chan = open (filename, flags, 0);
+ if (scratch_chan < 0)
+ perror_with_name (filename);
+
+ /* Looks semi-reasonable. Toss the old trace file and work on the new. */
+
+ discard_cleanups (old_chain); /* Don't free filename any more */
+ unpush_target (&tfile_ops);
+
+ push_target (&tfile_ops);
+
+ trace_filename = xstrdup (filename);
+ trace_fd = scratch_chan;
+
+ bytes = 0;
+ /* Read the file header and test for validity. */
+ gotten = read (trace_fd, &header, TRACE_HEADER_SIZE);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < TRACE_HEADER_SIZE)
+ error (_("Premature end of file while reading trace file"));
+
+ bytes += TRACE_HEADER_SIZE;
+ if (!(header[0] == 0x7f
+ && (strncmp (header + 1, "TRACE0\n", 7) == 0)))
+ error (_("File is not a valid trace file."));
+
+ trace_regblock_size = 0;
+ ts = current_trace_status ();
+ /* We know we're working with a file. */
+ ts->from_file = 1;
+ /* Set defaults in case there is no status line. */
+ ts->running_known = 0;
+ ts->stop_reason = trace_stop_reason_unknown;
+ ts->traceframe_count = -1;
+ ts->buffer_free = 0;
+
+ /* Read through a section of newline-terminated lines that
+ define things like tracepoints. */
+ i = 0;
+ while (1)
+ {
+ gotten = read (trace_fd, &byte, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+
+ ++bytes;
+ if (byte == '\n')
+ {
+ /* Empty line marks end of the definition section. */
+ if (i == 0)
+ break;
+ linebuf[i] = '\0';
+ i = 0;
+ tfile_interp_line (linebuf, &uploaded_tps, &uploaded_tsvs);
+ }
+ else
+ linebuf[i++] = byte;
+ if (i >= 1000)
+ error (_("Excessively long lines in trace file"));
+ }
+
+ /* Add the file's tracepoints and variables into the current mix. */
+
+ /* Get trace state variables first, they may be checked when parsing
+ uploaded commands. */
+ merge_uploaded_trace_state_variables (&uploaded_tsvs);
+
+ merge_uploaded_tracepoints (&uploaded_tps);
+
+ /* Record the starting offset of the binary trace data. */
+ trace_frames_offset = bytes;
+
+ /* If we don't have a blocksize, we can't interpret the
+ traceframes. */
+ if (trace_regblock_size == 0)
+ error (_("No register block size recorded in trace file"));
+ if (ts->traceframe_count <= 0)
+ {
+ warning ("No traceframes present in this file.");
+ return;
+ }
+
+#define TFILE_PID (1)
+ inferior_appeared (current_inferior (), TFILE_PID);
+ inferior_ptid = pid_to_ptid (TFILE_PID);
+ add_thread_silent (inferior_ptid);
+
+ post_create_inferior (&tfile_ops, from_tty);
+
+#if 0
+ /* FIXME this will get defined in MI patch submission */
+ tfind_1 (tfind_number, 0, 0, 0, 0);
+#endif
+}
+
+/* Interpret the given line from the definitions part of the trace
+ file. */
+
+static void
+tfile_interp_line (char *line,
+ struct uploaded_tp **utpp, struct uploaded_tsv **utsvp)
+{
+ char *p = line;
+
+ if (strncmp (p, "R ", strlen ("R ")) == 0)
+ {
+ p += strlen ("R ");
+ trace_regblock_size = strtol (p, &p, 16);
+ }
+ else if (strncmp (p, "status ", strlen ("status ")) == 0)
+ {
+ p += strlen ("status ");
+ parse_trace_status (p, current_trace_status ());
+ }
+ else if (strncmp (p, "tp ", strlen ("tp ")) == 0)
+ {
+ p += strlen ("tp ");
+ parse_tracepoint_definition (p, utpp);
+ }
+ else if (strncmp (p, "tsv ", strlen ("tsv ")) == 0)
+ {
+ p += strlen ("tsv ");
+ parse_tsv_definition (p, utsvp);
+ }
+ else
+ warning ("Ignoring trace file definition \"%s\"", line);
+}
+
+/* Parse the part of trace status syntax that is shared between
+ the remote protocol and the trace file reader. */
+
+extern char *unpack_varlen_hex (char *buff, ULONGEST *result);
+
+void
+parse_trace_status (char *line, struct trace_status *ts)
+{
+ char *p = line, *p1, *p_temp;
+ ULONGEST val;
+
+ ts->running_known = 1;
+ ts->running = (*p++ == '1');
+ ts->stop_reason = trace_stop_reason_unknown;
+ while (*p++)
+ {
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed trace status, at %s\n\
+Status line: '%s'\n"), p, line);
+ if (strncmp (p, stop_reason_names[trace_buffer_full], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = trace_buffer_full;
+ }
+ else if (strncmp (p, stop_reason_names[trace_never_run], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = trace_never_run;
+ }
+ else if (strncmp (p, stop_reason_names[tracepoint_passcount], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = tracepoint_passcount;
+ ts->stopping_tracepoint = val;
+ }
+ else if (strncmp (p, stop_reason_names[tstop_command], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = tstop_command;
+ }
+ if (strncmp (p, "tframes", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->traceframe_count = val;
+ }
+ if (strncmp (p, "tfree", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->buffer_free = val;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ else
+ /* Must be at the end. */
+ break;
+ }
+ }
+}
+
+/* Given a line of text defining a tracepoint or tracepoint action, parse
+ it into an "uploaded tracepoint". */
+
+void
+parse_tracepoint_definition (char *line, struct uploaded_tp **utpp)
+{
+ char *p;
+ char piece;
+ ULONGEST num, addr, step, pass, orig_size, xlen;
+ int enabled, i;
+ enum bptype type;
+ char *cond;
+ struct uploaded_tp *utp = NULL;
+
+ p = line;
+ /* Both tracepoint and action definitions start with the same number
+ and address sequence. */
+ piece = *p++;
+ p = unpack_varlen_hex (p, &num);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &addr);
+ p++; /* skip a colon */
+ if (piece == 'T')
+ {
+ enabled = (*p++ == 'E');
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &step);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &pass);
+ type = bp_tracepoint;
+ cond = NULL;
+ /* Thumb through optional fields. */
+ while (*p == ':')
+ {
+ p++; /* skip a colon */
+ if (*p == 'F')
+ {
+ type = bp_fast_tracepoint;
+ p++;
+ p = unpack_varlen_hex (p, &orig_size);
+ }
+ else if (*p == 'X')
+ {
+ p++;
+ p = unpack_varlen_hex (p, &xlen);
+ p++; /* skip a comma */
+ cond = (char *) xmalloc (2 * xlen + 1);
+ strncpy (cond, p, 2 * xlen);
+ cond[2 * xlen] = '\0';
+ p += 2 * xlen;
+ }
+ else
+ warning ("Unrecognized char '%c' in tracepoint definition, skipping rest", *p);
+ }
+ utp = get_uploaded_tp (num, addr, utpp);
+ utp->type = type;
+ utp->enabled = enabled;
+ utp->step = step;
+ utp->pass = pass;
+ utp->cond = cond;
+ }
+ else if (piece == 'A')
+ {
+ utp = get_uploaded_tp (num, addr, utpp);
+ utp->actions[utp->numactions++] = xstrdup (p);
+ }
+ else if (piece == 'S')
+ {
+ utp = get_uploaded_tp (num, addr, utpp);
+ utp->step_actions[utp->num_step_actions++] = xstrdup (p);
+ }
+ else
+ {
+ error ("Invalid tracepoint piece");
+ }
+}
+
+/* Convert a textual description of a trace state variable into an
+ uploaded object. */
+
+void
+parse_tsv_definition (char *line, struct uploaded_tsv **utsvp)
+{
+ char *p, *buf;
+ ULONGEST num, initval, builtin;
+ int end;
+ struct uploaded_tsv *utsv = NULL;
+
+ buf = alloca (strlen (line));
+
+ p = line;
+ p = unpack_varlen_hex (p, &num);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &initval);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &builtin);
+ p++; /* skip a colon */
+ end = hex2bin (p, (gdb_byte *) buf, strlen (p) / 2);
+ buf[end] = '\0';
+
+ utsv = get_uploaded_tsv (num, utsvp);
+ utsv->initial_value = initval;
+ utsv->builtin = builtin;
+ utsv->name = xstrdup (buf);
+}
+
+/* Close the trace file and generally clean up. */
+
+static void
+tfile_close (int quitting)
+{
+ int pid;
+
+ if (trace_fd < 0)
+ return;
+
+ pid = ptid_get_pid (inferior_ptid);
+ inferior_ptid = null_ptid; /* Avoid confusion from thread stuff */
+ exit_inferior_silent (pid);
+
+ close (trace_fd);
+ trace_fd = -1;
+ if (trace_filename)
+ xfree (trace_filename);
+}
+
+static void
+tfile_files_info (struct target_ops *t)
+{
+ /* (it would be useful to mention the name of the file) */
+ printf_filtered ("Looking at a trace file.\n");
+}
+
+/* The trace status for a file is that tracing can never be run. */
+
+static int
+tfile_get_trace_status (struct trace_status *ts)
+{
+ /* Other bits of trace status were collected as part of opening the
+ trace files, so nothing to do here. */
+
+ return -1;
+}
+
+/* Given the position of a traceframe in the file, figure out what
+ address the frame was collected at. This would normally be the
+ value of a collected PC register, but if not available, we
+ improvise. */
+
+static ULONGEST
+tfile_get_traceframe_address (off_t tframe_offset)
+{
+ ULONGEST addr = 0;
+ short tpnum;
+ struct breakpoint *tp;
+ off_t saved_offset = cur_offset;
+ int gotten;
+
+ /* FIXME dig pc out of collected registers */
+
+ /* Fall back to using tracepoint address. */
+ lseek (trace_fd, tframe_offset, SEEK_SET);
+ gotten = read (trace_fd, &tpnum, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+
+ tp = get_tracepoint_by_number_on_target (tpnum);
+ /* FIXME this is a poor heuristic if multiple locations */
+ if (tp && tp->loc)
+ addr = tp->loc->address;
+
+ /* Restore our seek position. */
+ cur_offset = saved_offset;
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ return addr;
+}
+
+/* Given a type of search and some parameters, scan the collection of
+ traceframes in the file looking for a match. When found, return
+ both the traceframe and tracepoint number, otherwise -1 for
+ each. */
+
+static int
+tfile_trace_find (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2, int *tpp)
+{
+ short tpnum;
+ int tfnum = 0, found = 0, gotten;
+ int data_size;
+ struct breakpoint *tp;
+ off_t offset, tframe_offset;
+ ULONGEST tfaddr;
+
+ lseek (trace_fd, trace_frames_offset, SEEK_SET);
+ offset = trace_frames_offset;
+ while (1)
+ {
+ tframe_offset = offset;
+ gotten = read (trace_fd, &tpnum, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ offset += 2;
+ if (tpnum == 0)
+ break;
+ gotten = read (trace_fd, &data_size, 4);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 4)
+ error (_("Premature end of file while reading trace file"));
+ offset += 4;
+ switch (type)
+ {
+ case tfind_number:
+ if (tfnum == num)
+ found = 1;
+ break;
+ case tfind_pc:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (tfaddr == addr1)
+ found = 1;
+ break;
+ case tfind_tp:
+ tp = get_tracepoint (num);
+ if (tp && tpnum == tp->number_on_target)
+ found = 1;
+ break;
+ case tfind_range:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (addr1 <= tfaddr && tfaddr <= addr2)
+ found = 1;
+ break;
+ case tfind_outside:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (!(addr1 <= tfaddr && tfaddr <= addr2))
+ found = 1;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("unknown tfind type"));
+ }
+ if (found)
+ {
+ printf_filtered ("Found traceframe %d.\n", tfnum);
+ if (tpp)
+ *tpp = tpnum;
+ cur_offset = offset;
+ cur_data_size = data_size;
+ return tfnum;
+ }
+ /* Skip past the traceframe's data. */
+ lseek (trace_fd, data_size, SEEK_CUR);
+ offset += data_size;
+ /* Update our own count of traceframes. */
+ ++tfnum;
+ }
+ /* Did not find what we were looking for. */
+ if (tpp)
+ *tpp = -1;
+ return -1;
+}
+
+/* Look for a block of saved registers in the traceframe, and get the
+ requested register from it. */
+
+static void
+tfile_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ char block_type;
+ int i, pos, offset, regn, regsize, gotten;
+ unsigned short mlen;
+ char *regs;
+
+ /* An uninitialized reg size says we're not going to be
+ successful at getting register blocks. */
+ if (!trace_regblock_size)
+ return;
+
+ regs = alloca (trace_regblock_size);
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ gotten = read (trace_fd, regs, trace_regblock_size);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < trace_regblock_size)
+ error (_("Premature end of file while reading trace file"));
+
+ /* Assume the block is laid out in GDB register number order,
+ each register with the size that it has in GDB. */
+ offset = 0;
+ for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
+ {
+ regsize = register_size (gdbarch, regn);
+ /* Make sure we stay within block bounds. */
+ if (offset + regsize >= trace_regblock_size)
+ break;
+ if (!regcache_valid_p (regcache, regn))
+ {
+ if (regno == regn)
+ {
+ regcache_raw_supply (regcache, regno, regs + offset);
+ break;
+ }
+ else if (regno == -1)
+ {
+ regcache_raw_supply (regcache, regn, regs + offset);
+ }
+ }
+ offset += regsize;
+ }
+ return;
+ case 'M':
+ lseek (trace_fd, 8, SEEK_CUR);
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ lseek (trace_fd, 4 + 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in trace frame",
+ block_type, block_type);
+ break;
+ }
+ }
+}
+
+static LONGEST
+tfile_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
+{
+ char block_type;
+ int pos, gotten;
+ ULONGEST maddr;
+ unsigned short mlen;
+
+ /* We're only doing regular memory for now. */
+ if (object != TARGET_OBJECT_MEMORY)
+ return -1;
+
+ if (readbuf == NULL)
+ error ("tfile_xfer_partial: trace file is read-only");
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ lseek (trace_fd, trace_regblock_size, SEEK_CUR);
+ pos += trace_regblock_size;
+ break;
+ case 'M':
+ gotten = read (trace_fd, &maddr, 8);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 8)
+ error (_("Premature end of file while reading trace file"));
+
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ if (maddr <= offset && (offset + len) <= (maddr + mlen))
+ {
+ gotten = read (trace_fd, readbuf, mlen);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < mlen)
+ error (_("Premature end of file qwhile reading trace file"));
+
+ return mlen;
+ }
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ lseek (trace_fd, 4 + 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in traceframe",
+ block_type, block_type);
+ break;
+ }
+ }
+ /* Indicate failure to find the requested memory block. */
+ return -1;
+}
+
+/* Iterate through the blocks of a trace frame, looking for a 'V'
+ block with a matching tsv number. */
+
+static int
+tfile_get_trace_state_variable_value (int tsvnum, LONGEST *val)
+{
+ char block_type;
+ int pos, vnum, gotten;
+ unsigned short mlen;
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ lseek (trace_fd, trace_regblock_size, SEEK_CUR);
+ pos += trace_regblock_size;
+ break;
+ case 'M':
+ lseek (trace_fd, 8, SEEK_CUR);
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ gotten = read (trace_fd, &vnum, 4);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 4)
+ error (_("Premature end of file while reading trace file"));
+ if (tsvnum == vnum)
+ {
+ gotten = read (trace_fd, val, 8);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 8)
+ error (_("Premature end of file while reading trace file"));
+ return 1;
+ }
+ lseek (trace_fd, 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in traceframe",
+ block_type, block_type);
+ break;
+ }
+ }
+ /* Didn't find anything. */
+ return 0;
+}
+
+static int
+tfile_has_memory (struct target_ops *ops)
+{
+ return 1;
+}
+
+static int
+tfile_has_stack (struct target_ops *ops)
+{
+ return 1;
+}
+
+static int
+tfile_has_registers (struct target_ops *ops)
+{
+ return 1;
+}
+
+static void
+init_tfile_ops (void)
+{
+ tfile_ops.to_shortname = "tfile";
+ tfile_ops.to_longname = "Local trace dump file";
+ tfile_ops.to_doc =
+ "Use a trace file as a target. Specify the filename of the trace file.";
+ tfile_ops.to_open = tfile_open;
+ tfile_ops.to_close = tfile_close;
+ tfile_ops.to_fetch_registers = tfile_fetch_registers;
+ tfile_ops.to_xfer_partial = tfile_xfer_partial;
+ tfile_ops.to_files_info = tfile_files_info;
+ tfile_ops.to_get_trace_status = tfile_get_trace_status;
+ tfile_ops.to_trace_find = tfile_trace_find;
+ tfile_ops.to_get_trace_state_variable_value = tfile_get_trace_state_variable_value;
+ /* core_stratum might seem more logical, but GDB doesn't like having
+ more than one core_stratum vector. */
+ tfile_ops.to_stratum = process_stratum;
+ tfile_ops.to_has_memory = tfile_has_memory;
+ tfile_ops.to_has_stack = tfile_has_stack;
+ tfile_ops.to_has_registers = tfile_has_registers;
+ tfile_ops.to_magic = OPS_MAGIC;
+}
/* module initialization */
void
add_com ("tdump", class_trace, trace_dump_command,
_("Print everything collected at the current tracepoint."));
+ add_com ("tsave", class_trace, trace_save_command, _("\
+Save the trace data to a file.\n\
+Use the '-r' option to direct the target to save directly to the file,\n\
+using its own filesystem."));
+
c = add_com ("tvariable", class_trace, trace_variable_command,_("\
Define a trace state variable.\n\
Argument is a $-prefixed name, optionally followed\n\
&tfindlist, "tfind ", 1, &cmdlist);
add_cmd ("outside", class_trace, trace_find_outside_command, _("\
-Select a trace frame whose PC is outside the given range.\n\
+Select a trace frame whose PC is outside the given range (exclusive).\n\
Usage: tfind outside addr1, addr2"),
&tfindlist);
add_cmd ("range", class_trace, trace_find_range_command, _("\
-Select a trace frame whose PC is in the given range.\n\
+Select a trace frame whose PC is in the given range (inclusive).\n\
Usage: tfind range addr1,addr2"),
&tfindlist);
NULL, NULL,
&setlist, &showlist);
- target_buf_size = 2048;
- target_buf = xmalloc (target_buf_size);
+ add_setshow_boolean_cmd ("disconnected-tracing", no_class,
+ &disconnected_tracing, _("\
+Set whether tracing continues after GDB disconnects."), _("\
+Show whether tracing continues after GDB disconnects."), _("\
+Use this to continue a tracing run even if GDB disconnects\n\
+or detaches from the target. You can reconnect later and look at\n\
+trace data collected in the meantime."),
+ set_disconnected_tracing,
+ NULL,
+ &setlist,
+ &showlist);
+
+ init_tfile_ops ();
+
+ add_target (&tfile_ops);
}