/* General utility routines for GDB, the GNU debugger.
- Copyright 1986, 1989, 1990-1992, 1995, 1996, 1998, 2000
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GDB.
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#include "defs.h"
-#include <ctype.h>
-#include "gdb_string.h"
-#include "event-top.h"
+/* FIXME: cagney/2002-02-28: The GDB coding standard indicates that
+ "defs.h" should be included first. Unfortunatly some systems
+ (currently Debian GNU/Linux) include the <stdbool.h> via <curses.h>
+ and they clash with "bfd.h"'s definiton of true/false. The correct
+ fix is to remove true/false from "bfd.h", however, until that
+ happens, hack around it by including "config.h" and <curses.h>
+ first. */
+
+#include "config.h"
#ifdef HAVE_CURSES_H
#include <curses.h>
#include <term.h>
#endif
+#include "defs.h"
+#include "gdb_assert.h"
+#include <ctype.h>
+#include "gdb_string.h"
+#include "event-top.h"
+
#ifdef __GO32__
#include <pc.h>
#endif
#undef reg
#endif
-#include "signals.h"
+#include <signal.h>
#include "gdbcmd.h"
#include "serial.h"
#include "bfd.h"
#include "expression.h"
#include "language.h"
#include "annotate.h"
+#include "filenames.h"
+
+#include "inferior.h" /* for signed_pointer_to_address */
+
+#include <sys/param.h> /* For MAXPATHLEN */
#include <readline/readline.h>
-#undef XMALLOC
-#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
+#ifdef USE_MMALLOC
+#include "mmalloc.h"
+#endif
+
+#ifdef NEED_DECLARATION_MALLOC
+extern PTR malloc ();
+#endif
+#ifdef NEED_DECLARATION_REALLOC
+extern PTR realloc ();
+#endif
+#ifdef NEED_DECLARATION_FREE
+extern void free ();
+#endif
+/* Actually, we'll never have the decl, since we don't define _GNU_SOURCE. */
+#if defined(HAVE_CANONICALIZE_FILE_NAME) \
+ && defined(NEED_DECLARATION_CANONICALIZE_FILE_NAME)
+extern char *canonicalize_file_name (const char *);
+#endif
/* readline defines this. */
#undef savestring
-void (*error_begin_hook) PARAMS ((void));
+void (*error_begin_hook) (void);
/* Holds the last error message issued by gdb */
static void fputs_maybe_filtered (const char *, struct ui_file *, int);
#if defined (USE_MMALLOC) && !defined (NO_MMCHECK)
-static void malloc_botch PARAMS ((void));
+static void malloc_botch (void);
#endif
-static void
-prompt_for_continue PARAMS ((void));
+static void prompt_for_continue (void);
-static void
-set_width_command PARAMS ((char *, int, struct cmd_list_element *));
+static void set_width_command (char *, int, struct cmd_list_element *);
-static void
-set_width PARAMS ((void));
+static void set_width (void);
/* Chain of cleanup actions established with make_cleanup,
to be executed if an error happens. */
}
static void
-do_freeargv (arg)
- void *arg;
+do_freeargv (void *arg)
{
freeargv ((char **) arg);
}
struct cleanup *
-make_cleanup_freeargv (arg)
- char **arg;
+make_cleanup_freeargv (char **arg)
{
return make_my_cleanup (&cleanup_chain, do_freeargv, arg);
}
+static void
+do_bfd_close_cleanup (void *arg)
+{
+ bfd_close (arg);
+}
+
+struct cleanup *
+make_cleanup_bfd_close (bfd *abfd)
+{
+ return make_cleanup (do_bfd_close_cleanup, abfd);
+}
+
+static void
+do_close_cleanup (void *arg)
+{
+ int *fd = arg;
+ close (*fd);
+ xfree (fd);
+}
+
+struct cleanup *
+make_cleanup_close (int fd)
+{
+ int *saved_fd = xmalloc (sizeof (fd));
+ *saved_fd = fd;
+ return make_cleanup (do_close_cleanup, saved_fd);
+}
+
static void
do_ui_file_delete (void *arg)
{
until we get back to the point OLD_CHAIN in the cleanup_chain. */
void
-do_cleanups (old_chain)
- register struct cleanup *old_chain;
+do_cleanups (register struct cleanup *old_chain)
{
do_my_cleanups (&cleanup_chain, old_chain);
}
void
-do_final_cleanups (old_chain)
- register struct cleanup *old_chain;
+do_final_cleanups (register struct cleanup *old_chain)
{
do_my_cleanups (&final_cleanup_chain, old_chain);
}
void
-do_run_cleanups (old_chain)
- register struct cleanup *old_chain;
+do_run_cleanups (register struct cleanup *old_chain)
{
do_my_cleanups (&run_cleanup_chain, old_chain);
}
void
-do_exec_cleanups (old_chain)
- register struct cleanup *old_chain;
+do_exec_cleanups (register struct cleanup *old_chain)
{
do_my_cleanups (&exec_cleanup_chain, old_chain);
}
void
-do_exec_error_cleanups (old_chain)
- register struct cleanup *old_chain;
+do_exec_error_cleanups (register struct cleanup *old_chain)
{
do_my_cleanups (&exec_error_cleanup_chain, old_chain);
}
void
-do_my_cleanups (pmy_chain, old_chain)
- register struct cleanup **pmy_chain;
- register struct cleanup *old_chain;
+do_my_cleanups (register struct cleanup **pmy_chain,
+ register struct cleanup *old_chain)
{
register struct cleanup *ptr;
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next; /* Do this first incase recursion */
(*ptr->function) (ptr->arg);
- free (ptr);
+ xfree (ptr);
}
}
until we get back to the point OLD_CHAIN in the cleanup_chain. */
void
-discard_cleanups (old_chain)
- register struct cleanup *old_chain;
+discard_cleanups (register struct cleanup *old_chain)
{
discard_my_cleanups (&cleanup_chain, old_chain);
}
void
-discard_final_cleanups (old_chain)
- register struct cleanup *old_chain;
+discard_final_cleanups (register struct cleanup *old_chain)
{
discard_my_cleanups (&final_cleanup_chain, old_chain);
}
void
-discard_exec_error_cleanups (old_chain)
- register struct cleanup *old_chain;
+discard_exec_error_cleanups (register struct cleanup *old_chain)
{
discard_my_cleanups (&exec_error_cleanup_chain, old_chain);
}
void
-discard_my_cleanups (pmy_chain, old_chain)
- register struct cleanup **pmy_chain;
- register struct cleanup *old_chain;
+discard_my_cleanups (register struct cleanup **pmy_chain,
+ register struct cleanup *old_chain)
{
register struct cleanup *ptr;
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next;
- free (ptr);
+ xfree (ptr);
}
}
/* Set the cleanup_chain to 0, and return the old cleanup chain. */
struct cleanup *
-save_cleanups ()
+save_cleanups (void)
{
return save_my_cleanups (&cleanup_chain);
}
struct cleanup *
-save_final_cleanups ()
+save_final_cleanups (void)
{
return save_my_cleanups (&final_cleanup_chain);
}
struct cleanup *
-save_my_cleanups (pmy_chain)
- struct cleanup **pmy_chain;
+save_my_cleanups (struct cleanup **pmy_chain)
{
struct cleanup *old_chain = *pmy_chain;
/* Restore the cleanup chain from a previously saved chain. */
void
-restore_cleanups (chain)
- struct cleanup *chain;
+restore_cleanups (struct cleanup *chain)
{
restore_my_cleanups (&cleanup_chain, chain);
}
void
-restore_final_cleanups (chain)
- struct cleanup *chain;
+restore_final_cleanups (struct cleanup *chain)
{
restore_my_cleanups (&final_cleanup_chain, chain);
}
void
-restore_my_cleanups (pmy_chain, chain)
- struct cleanup **pmy_chain;
- struct cleanup *chain;
+restore_my_cleanups (struct cleanup **pmy_chain, struct cleanup *chain)
{
*pmy_chain = chain;
}
to arrange to free the object thus allocated. */
void
-free_current_contents (location)
- char **location;
+free_current_contents (void *ptr)
{
- free (*location);
+ void **location = ptr;
+ if (location == NULL)
+ internal_error (__FILE__, __LINE__,
+ "free_current_contents: NULL pointer");
+ if (*location != NULL)
+ {
+ xfree (*location);
+ *location = NULL;
+ }
}
/* Provide a known function that does nothing, to use as a base for
{
}
-/* Add a continuation to the continuation list, the gloabl list
+/* Add a continuation to the continuation list, the global list
cmd_continuation. The new continuation will be added at the front.*/
void
-add_continuation (continuation_hook, arg_list)
- void (*continuation_hook) PARAMS ((struct continuation_arg *));
- struct continuation_arg *arg_list;
+add_continuation (void (*continuation_hook) (struct continuation_arg *),
+ struct continuation_arg *arg_list)
{
struct continuation *continuation_ptr;
and do the continuations from there on, instead of using the
global beginning of list as our iteration pointer.*/
void
-do_all_continuations ()
+do_all_continuations (void)
{
struct continuation *continuation_ptr;
struct continuation *saved_continuation;
(continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
saved_continuation = continuation_ptr;
continuation_ptr = continuation_ptr->next;
- free (saved_continuation);
+ xfree (saved_continuation);
}
}
/* Walk down the cmd_continuation list, and get rid of all the
continuations. */
void
-discard_all_continuations ()
+discard_all_continuations (void)
{
struct continuation *continuation_ptr;
{
continuation_ptr = cmd_continuation;
cmd_continuation = continuation_ptr->next;
- free (continuation_ptr);
+ xfree (continuation_ptr);
}
}
-/* Add a continuation to the continuation list, the gloabl list
+/* Add a continuation to the continuation list, the global list
intermediate_continuation. The new continuation will be added at the front.*/
void
-add_intermediate_continuation (continuation_hook, arg_list)
- void (*continuation_hook) PARAMS ((struct continuation_arg *));
- struct continuation_arg *arg_list;
+add_intermediate_continuation (void (*continuation_hook)
+ (struct continuation_arg *),
+ struct continuation_arg *arg_list)
{
struct continuation *continuation_ptr;
and do the continuations from there on, instead of using the
global beginning of list as our iteration pointer.*/
void
-do_all_intermediate_continuations ()
+do_all_intermediate_continuations (void)
{
struct continuation *continuation_ptr;
struct continuation *saved_continuation;
(continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
saved_continuation = continuation_ptr;
continuation_ptr = continuation_ptr->next;
- free (saved_continuation);
+ xfree (saved_continuation);
}
}
/* Walk down the cmd_continuation list, and get rid of all the
continuations. */
void
-discard_all_intermediate_continuations ()
+discard_all_intermediate_continuations (void)
{
struct continuation *continuation_ptr;
{
continuation_ptr = intermediate_continuation;
intermediate_continuation = continuation_ptr->next;
- free (continuation_ptr);
+ xfree (continuation_ptr);
}
}
\f
-/* Print a warning message. Way to use this is to call warning_begin,
- output the warning message (use unfiltered output to gdb_stderr),
- ending in a newline. There is not currently a warning_end that you
- call afterwards, but such a thing might be added if it is useful
- for a GUI to separate warning messages from other output.
-
- FIXME: Why do warnings use unfiltered output and errors filtered?
- Is this anything other than a historical accident? */
+/* Print a warning message. The first argument STRING is the warning
+ message, used as an fprintf format string, the second is the
+ va_list of arguments for that string. A warning is unfiltered (not
+ paginated) so that the user does not need to page through each
+ screen full of warnings when there are lots of them. */
void
-warning_begin ()
+vwarning (const char *string, va_list args)
{
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
- if (warning_pre_print)
- fprintf_unfiltered (gdb_stderr, warning_pre_print);
+ if (warning_hook)
+ (*warning_hook) (string, args);
+ else
+ {
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+ if (warning_pre_print)
+ fprintf_unfiltered (gdb_stderr, warning_pre_print);
+ vfprintf_unfiltered (gdb_stderr, string, args);
+ fprintf_unfiltered (gdb_stderr, "\n");
+ va_end (args);
+ }
}
/* Print a warning message.
{
va_list args;
va_start (args, string);
- if (warning_hook)
- (*warning_hook) (string, args);
- else
- {
- warning_begin ();
- vfprintf_unfiltered (gdb_stderr, string, args);
- fprintf_unfiltered (gdb_stderr, "\n");
- va_end (args);
- }
-}
-
-/* Start the printing of an error message. Way to use this is to call
- this, output the error message (use filtered output to gdb_stderr
- (FIXME: Some callers, like memory_error, use gdb_stdout)), ending
- in a newline, and then call return_to_top_level (RETURN_ERROR).
- error() provides a convenient way to do this for the special case
- that the error message can be formatted with a single printf call,
- but this is more general. */
-void
-error_begin ()
-{
- if (error_begin_hook)
- error_begin_hook ();
-
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
-
- annotate_error_begin ();
-
- if (error_pre_print)
- fprintf_filtered (gdb_stderr, error_pre_print);
+ vwarning (string, args);
+ va_end (args);
}
/* Print an error message and return to command level.
NORETURN void
verror (const char *string, va_list args)
{
- char *err_string;
- struct cleanup *err_string_cleanup;
- /* FIXME: cagney/1999-11-10: All error calls should come here.
- Unfortunatly some code uses the sequence: error_begin(); print
- error message; return_to_top_level. That code should be
- flushed. */
- error_begin ();
- /* NOTE: It's tempting to just do the following...
- vfprintf_filtered (gdb_stderr, string, args);
- and then follow with a similar looking statement to cause the message
- to also go to gdb_lasterr. But if we do this, we'll be traversing the
- va_list twice which works on some platforms and fails miserably on
- others. */
- /* Save it as the last error */
- ui_file_rewind (gdb_lasterr);
- vfprintf_filtered (gdb_lasterr, string, args);
- /* Retrieve the last error and print it to gdb_stderr */
- err_string = error_last_message ();
- err_string_cleanup = make_cleanup (free, err_string);
- fputs_filtered (err_string, gdb_stderr);
- fprintf_filtered (gdb_stderr, "\n");
- do_cleanups (err_string_cleanup);
- return_to_top_level (RETURN_ERROR);
+ struct ui_file *tmp_stream = mem_fileopen ();
+ make_cleanup_ui_file_delete (tmp_stream);
+ vfprintf_unfiltered (tmp_stream, string, args);
+ error_stream (tmp_stream);
}
NORETURN void
va_end (args);
}
+static void
+do_write (void *data, const char *buffer, long length_buffer)
+{
+ ui_file_write (data, buffer, length_buffer);
+}
+
NORETURN void
error_stream (struct ui_file *stream)
{
- long size;
- char *msg = ui_file_xstrdup (stream, &size);
- make_cleanup (free, msg);
- error ("%s", msg);
+ if (error_begin_hook)
+ error_begin_hook ();
+
+ /* Copy the stream into the GDB_LASTERR buffer. */
+ ui_file_rewind (gdb_lasterr);
+ ui_file_put (stream, do_write, gdb_lasterr);
+
+ /* Write the message plus any error_pre_print to gdb_stderr. */
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+ annotate_error_begin ();
+ if (error_pre_print)
+ fprintf_filtered (gdb_stderr, error_pre_print);
+ ui_file_put (stream, do_write, gdb_stderr);
+ fprintf_filtered (gdb_stderr, "\n");
+
+ throw_exception (RETURN_ERROR);
}
/* Get the last error message issued by gdb */
want to continue, dump core, or just exit. */
NORETURN void
-internal_verror (const char *fmt, va_list ap)
+internal_verror (const char *file, int line,
+ const char *fmt, va_list ap)
{
static char msg[] = "Internal GDB error: recursive internal error.\n";
static int dejavu = 0;
- int continue_p;
+ int quit_p;
int dump_core_p;
/* don't allow infinite error recursion. */
case 1:
dejavu = 2;
fputs_unfiltered (msg, gdb_stderr);
- abort ();
+ abort (); /* NOTE: GDB has only three calls to abort(). */
default:
dejavu = 3;
write (STDERR_FILENO, msg, sizeof (msg));
}
/* Try to get the message out */
- fputs_unfiltered ("gdb-internal-error: ", gdb_stderr);
+ target_terminal_ours ();
+ fprintf_unfiltered (gdb_stderr, "%s:%d: gdb-internal-error: ", file, line);
vfprintf_unfiltered (gdb_stderr, fmt, ap);
fputs_unfiltered ("\n", gdb_stderr);
- /* Default (no case) is to quit GDB. When in batch mode this
+ /* Default (yes/batch case) is to quit GDB. When in batch mode this
lessens the likelhood of GDB going into an infinate loop. */
- continue_p = query ("\
-An internal GDB error was detected. This may make make further\n\
-debugging unreliable. Continue this debugging session? ");
+ quit_p = query ("\
+An internal GDB error was detected. This may make further\n\
+debugging unreliable. Quit this debugging session? ");
- /* Default (no case) is to not dump core. Lessen the chance of GDB
- leaving random core files around. */
+ /* Default (yes/batch case) is to dump core. This leaves a GDB
+ dropping so that it is easier to see that something went wrong to
+ GDB. */
dump_core_p = query ("\
Create a core file containing the current state of GDB? ");
- if (continue_p)
+ if (quit_p)
{
if (dump_core_p)
- {
- if (fork () == 0)
- abort ();
- }
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+ else
+ exit (1);
}
else
{
if (dump_core_p)
- abort ();
- else
- exit (1);
+ {
+ if (fork () == 0)
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+ }
}
dejavu = 0;
- return_to_top_level (RETURN_ERROR);
+ throw_exception (RETURN_ERROR);
}
NORETURN void
-internal_error (char *string, ...)
+internal_error (const char *file, int line, const char *string, ...)
{
va_list ap;
va_start (ap, string);
- internal_verror (string, ap);
+
+ internal_verror (file, line, string, ap);
va_end (ap);
}
printable string. */
char *
-safe_strerror (errnum)
- int errnum;
+safe_strerror (int errnum)
{
char *msg;
static char buf[32];
return (msg);
}
-/* The strsignal() function can return NULL for signal values that are
- out of range. Provide a "safe" version that always returns a
- printable string. */
-
-char *
-safe_strsignal (signo)
- int signo;
-{
- char *msg;
- static char buf[32];
-
- if ((msg = strsignal (signo)) == NULL)
- {
- sprintf (buf, "(undocumented signal %d)", signo);
- msg = buf;
- }
- return (msg);
-}
-
-
/* Print the system error message for errno, and also mention STRING
as the file name for which the error was encountered.
Then return to command level. */
NORETURN void
-perror_with_name (string)
- char *string;
+perror_with_name (const char *string)
{
char *err;
char *combined;
as the file name for which the error was encountered. */
void
-print_sys_errmsg (string, errcode)
- char *string;
- int errcode;
+print_sys_errmsg (const char *string, int errcode)
{
char *err;
char *combined;
/* Control C eventually causes this to be called, at a convenient time. */
void
-quit ()
+quit (void)
{
- serial_t gdb_stdout_serial = serial_fdopen (1);
+ struct serial *gdb_stdout_serial = serial_fdopen (1);
target_terminal_ours ();
gdb_flush (gdb_stderr);
/* 3. The system-level buffer. */
- SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
- SERIAL_UN_FDOPEN (gdb_stdout_serial);
+ serial_drain_output (gdb_stdout_serial);
+ serial_un_fdopen (gdb_stdout_serial);
annotate_error_begin ();
fprintf_unfiltered (gdb_stderr,
"Quit (expect signal SIGINT when the program is resumed)\n");
#endif
- return_to_top_level (RETURN_QUIT);
+ throw_exception (RETURN_QUIT);
}
-
-#if defined(_MSC_VER) /* should test for wingdb instead? */
-
-/*
- * Windows translates all keyboard and mouse events
- * into a message which is appended to the message
- * queue for the process.
- */
-
-void
-notice_quit ()
-{
- int k = win32pollquit ();
- if (k == 1)
- quit_flag = 1;
- else if (k == 2)
- immediate_quit = 1;
-}
-
-#else /* !defined(_MSC_VER) */
-
-void
-notice_quit ()
-{
- /* Done by signals */
-}
-
-#endif /* !defined(_MSC_VER) */
-
/* Control C comes here */
void
-request_quit (signo)
- int signo;
+request_quit (int signo)
{
quit_flag = 1;
/* Restore the signal handler. Harmless with BSD-style signals, needed
\f
/* Memory management stuff (malloc friends). */
-/* Make a substitute size_t for non-ANSI compilers. */
-
-#ifndef HAVE_STDDEF_H
-#ifndef size_t
-#define size_t unsigned int
-#endif
-#endif
-
#if !defined (USE_MMALLOC)
-PTR
-mcalloc (PTR md, size_t number, size_t size)
-{
- return calloc (number, size);
-}
+/* NOTE: These must use PTR so that their definition matches the
+ declaration found in "mmalloc.h". */
-PTR
-mmalloc (md, size)
- PTR md;
- size_t size;
+static void *
+mmalloc (void *md, size_t size)
{
- return malloc (size);
+ return malloc (size); /* NOTE: GDB's only call to malloc() */
}
-PTR
-mrealloc (md, ptr, size)
- PTR md;
- PTR ptr;
- size_t size;
+static void *
+mrealloc (void *md, void *ptr, size_t size)
{
if (ptr == 0) /* Guard against old realloc's */
- return malloc (size);
+ return mmalloc (md, size);
else
- return realloc (ptr, size);
+ return realloc (ptr, size); /* NOTE: GDB's only call to ralloc() */
}
-void
-mfree (md, ptr)
- PTR md;
- PTR ptr;
+static void *
+mcalloc (void *md, size_t number, size_t size)
{
- free (ptr);
+ return calloc (number, size); /* NOTE: GDB's only call to calloc() */
+}
+
+static void
+mfree (void *md, void *ptr)
+{
+ free (ptr); /* NOTE: GDB's only call to free() */
}
#endif /* USE_MMALLOC */
#else /* Have mmalloc and want corruption checking */
static void
-malloc_botch ()
+malloc_botch (void)
{
fprintf_unfiltered (gdb_stderr, "Memory corruption\n");
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
/* Attempt to install hooks in mmalloc/mrealloc/mfree for the heap specified
memory requested in SIZE. */
NORETURN void
-nomem (size)
- long size;
+nomem (long size)
{
if (size > 0)
{
- internal_error ("virtual memory exhausted: can't allocate %ld bytes.", size);
+ internal_error (__FILE__, __LINE__,
+ "virtual memory exhausted: can't allocate %ld bytes.", size);
}
else
{
- internal_error ("virtual memory exhausted.");
+ internal_error (__FILE__, __LINE__,
+ "virtual memory exhausted.");
}
}
-/* Like mmalloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. Whether to return NULL for
- a zero byte request, or translate the request into a request for one
- byte of zero'd storage, is a religious issue. */
+/* The xmmalloc() family of memory management routines.
-PTR
-xmmalloc (md, size)
- PTR md;
- long size;
+ These are are like the mmalloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems: if a malloc fails, an internal error is thrown; if
+ free(NULL) is called, it is ignored; if *alloc(0) is called, NULL
+ is returned.
+
+ All these routines are implemented using the mmalloc() family. */
+
+void *
+xmmalloc (void *md, size_t size)
{
- register PTR val;
+ void *val;
if (size == 0)
{
val = NULL;
}
- else if ((val = mmalloc (md, size)) == NULL)
+ else
{
- nomem (size);
+ val = mmalloc (md, size);
+ if (val == NULL)
+ nomem (size);
}
return (val);
}
-/* Like mrealloc but get error if no storage available. */
-
-PTR
-xmrealloc (md, ptr, size)
- PTR md;
- PTR ptr;
- long size;
+void *
+xmrealloc (void *md, void *ptr, size_t size)
{
- register PTR val;
+ void *val;
- if (ptr != NULL)
+ if (size == 0)
{
- val = mrealloc (md, ptr, size);
+ if (ptr != NULL)
+ mfree (md, ptr);
+ val = NULL;
}
else
{
- val = mmalloc (md, size);
+ if (ptr != NULL)
+ {
+ val = mrealloc (md, ptr, size);
+ }
+ else
+ {
+ val = mmalloc (md, size);
+ }
+ if (val == NULL)
+ {
+ nomem (size);
+ }
}
- if (val == NULL)
+ return (val);
+}
+
+void *
+xmcalloc (void *md, size_t number, size_t size)
+{
+ void *mem;
+ if (number == 0 || size == 0)
+ mem = NULL;
+ else
{
- nomem (size);
+ mem = mcalloc (md, number, size);
+ if (mem == NULL)
+ nomem (number * size);
}
- return (val);
+ return mem;
+}
+
+void
+xmfree (void *md, void *ptr)
+{
+ if (ptr != NULL)
+ mfree (md, ptr);
}
-/* Like malloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. */
+/* The xmalloc() (libiberty.h) family of memory management routines.
+
+ These are like the ISO-C malloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems. See xmmalloc() above for further information.
+
+ All these routines are wrappers to the xmmalloc() family. */
+
+/* NOTE: These are declared using PTR to ensure consistency with
+ "libiberty.h". xfree() is GDB local. */
PTR
-xmalloc (size)
- size_t size;
+xmalloc (size_t size)
{
- return (xmmalloc ((PTR) NULL, size));
+ return xmmalloc (NULL, size);
}
-/* Like calloc but get error if no storage available */
+PTR
+xrealloc (PTR ptr, size_t size)
+{
+ return xmrealloc (NULL, ptr, size);
+}
PTR
xcalloc (size_t number, size_t size)
{
- void *mem = mcalloc (NULL, number, size);
- if (mem == NULL)
- nomem (number * size);
- return mem;
+ return xmcalloc (NULL, number, size);
}
-/* Like mrealloc but get error if no storage available. */
-
-PTR
-xrealloc (ptr, size)
- PTR ptr;
- size_t size;
+void
+xfree (void *ptr)
{
- return (xmrealloc ((PTR) NULL, ptr, size));
+ xmfree (NULL, ptr);
}
\f
+/* Like asprintf/vasprintf but get an internal_error if the call
+ fails. */
+
+void
+xasprintf (char **ret, const char *format, ...)
+{
+ va_list args;
+ va_start (args, format);
+ xvasprintf (ret, format, args);
+ va_end (args);
+}
+
+void
+xvasprintf (char **ret, const char *format, va_list ap)
+{
+ int status = vasprintf (ret, format, ap);
+ /* NULL could be returned due to a memory allocation problem; a
+ badly format string; or something else. */
+ if ((*ret) == NULL)
+ internal_error (__FILE__, __LINE__,
+ "vasprintf returned NULL buffer (errno %d)",
+ errno);
+ /* A negative status with a non-NULL buffer shouldn't never
+ happen. But to be sure. */
+ if (status < 0)
+ internal_error (__FILE__, __LINE__,
+ "vasprintf call failed (errno %d)",
+ errno);
+}
+
+
/* My replacement for the read system call.
Used like `read' but keeps going if `read' returns too soon. */
int
-myread (desc, addr, len)
- int desc;
- char *addr;
- int len;
+myread (int desc, char *addr, int len)
{
register int val;
int orglen = len;
Uses malloc to get the space. Returns the address of the copy. */
char *
-savestring (ptr, size)
- const char *ptr;
- int size;
+savestring (const char *ptr, size_t size)
{
register char *p = (char *) xmalloc (size + 1);
memcpy (p, ptr, size);
}
char *
-msavestring (void *md, const char *ptr, int size)
+msavestring (void *md, const char *ptr, size_t size)
{
register char *p = (char *) xmmalloc (md, size + 1);
memcpy (p, ptr, size);
return p;
}
-/* The "const" is so it compiles under DGUX (which prototypes strsave
- in <string.h>. FIXME: This should be named "xstrsave", shouldn't it?
- Doesn't real strsave return NULL if out of memory? */
-char *
-strsave (ptr)
- const char *ptr;
-{
- return savestring (ptr, strlen (ptr));
-}
-
char *
mstrsave (void *md, const char *ptr)
{
}
void
-print_spaces (n, file)
- register int n;
- register struct ui_file *file;
+print_spaces (register int n, register struct ui_file *file)
{
fputs_unfiltered (n_spaces (n), file);
}
/* VARARGS */
int
-query (char *ctlstr,...)
+query (const char *ctlstr,...)
{
va_list args;
register int answer;
/* Automatically answer "yes" if input is not from a terminal. */
if (!input_from_terminal_p ())
return 1;
-#ifdef MPW
- /* FIXME Automatically answer "yes" if called from MacGDB. */
- if (mac_app)
- return 1;
-#endif /* MPW */
while (1)
{
if (annotation_level > 1)
printf_filtered ("\n\032\032query\n");
-#ifdef MPW
- /* If not in MacGDB, move to a new line so the entered line doesn't
- have a prompt on the front of it. */
- if (!mac_app)
- fputs_unfiltered ("\n", gdb_stdout);
-#endif /* MPW */
-
wrap_here ("");
gdb_flush (gdb_stdout);
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- answer = fgetc (stdin);
-#if defined(TUI)
- else
- answer = (unsigned char) tuiBufferGetc ();
-
-#endif
+ answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
break;
}
/* Eat rest of input line, to EOF or newline */
- if ((answer != '\n') || (tui_version && answer != '\r'))
+ if (answer != '\n')
do
{
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- ans2 = fgetc (stdin);
-#if defined(TUI)
- else
- ans2 = (unsigned char) tuiBufferGetc ();
-#endif
+ ans2 = fgetc (stdin);
clearerr (stdin);
}
while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
- TUIDO (((TuiOpaqueFuncPtr) tui_vStartNewLines, 1));
if (answer >= 'a')
answer -= 040;
after the zeros. A value of 0 does not mean end of string. */
int
-parse_escape (string_ptr)
- char **string_ptr;
+parse_escape (char **string_ptr)
{
register int c = *(*string_ptr)++;
switch (c)
be call for printing things which are independent of the language
of the program being debugged. */
-static void printchar (int c, void (*do_fputs) (const char *, struct ui_file*), void (*do_fprintf) (struct ui_file*, const char *, ...), struct ui_file *stream, int quoter);
-
static void
-printchar (c, do_fputs, do_fprintf, stream, quoter)
- int c;
- void (*do_fputs) PARAMS ((const char *, struct ui_file*));
- void (*do_fprintf) PARAMS ((struct ui_file*, const char *, ...));
- struct ui_file *stream;
- int quoter;
+printchar (int c, void (*do_fputs) (const char *, struct ui_file *),
+ void (*do_fprintf) (struct ui_file *, const char *, ...),
+ struct ui_file *stream, int quoter)
{
c &= 0xFF; /* Avoid sign bit follies */
the language of the program being debugged. */
void
-fputstr_filtered (str, quoter, stream)
- const char *str;
- int quoter;
- struct ui_file *stream;
+fputstr_filtered (const char *str, int quoter, struct ui_file *stream)
{
while (*str)
printchar (*str++, fputs_filtered, fprintf_filtered, stream, quoter);
}
void
-fputstr_unfiltered (str, quoter, stream)
- const char *str;
- int quoter;
- struct ui_file *stream;
+fputstr_unfiltered (const char *str, int quoter, struct ui_file *stream)
{
while (*str)
printchar (*str++, fputs_unfiltered, fprintf_unfiltered, stream, quoter);
}
void
-fputstrn_unfiltered (str, n, quoter, stream)
- const char *str;
- int n;
- int quoter;
- struct ui_file *stream;
+fputstrn_unfiltered (const char *str, int n, int quoter, struct ui_file *stream)
{
int i;
for (i = 0; i < n; i++)
/* Number of lines per page or UINT_MAX if paging is disabled. */
static unsigned int lines_per_page;
-/* Number of chars per line or UNIT_MAX if line folding is disabled. */
+/* Number of chars per line or UINT_MAX if line folding is disabled. */
static unsigned int chars_per_line;
/* Current count of lines printed on this page, chars on this line. */
static unsigned int lines_printed, chars_printed;
/* Inialize the lines and chars per page */
void
-init_page_info ()
+init_page_info (void)
{
#if defined(TUI)
- if (tui_version && m_winPtrNotNull (cmdWin))
- {
- lines_per_page = cmdWin->generic.height;
- chars_per_line = cmdWin->generic.width;
- }
- else
+ if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
{
/* These defaults will be used if we are unable to get the correct
lines_per_page = 24;
chars_per_line = 80;
-#if !defined (MPW) && !defined (_WIN32)
+#if !defined (_WIN32)
/* No termcap under MPW, although might be cool to do something
by looking at worksheet or console window sizes. */
/* Initialize the screen height and width from termcap. */
}
static void
-set_width ()
+set_width (void)
{
if (chars_per_line == 0)
init_page_info ();
/* ARGSUSED */
static void
-set_width_command (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+set_width_command (char *args, int from_tty, struct cmd_list_element *c)
{
set_width ();
}
to continue by pressing RETURN. */
static void
-prompt_for_continue ()
+prompt_for_continue (void)
{
char *ignore;
char cont_prompt[120];
else
async_request_quit (0);
}
- free (ignore);
+ xfree (ignore);
}
immediate_quit--;
/* Reinitialize filter; ie. tell it to reset to original values. */
void
-reinitialize_more_filter ()
+reinitialize_more_filter (void)
{
lines_printed = 0;
chars_printed = 0;
used to force out output from the wrap_buffer. */
void
-wrap_here (indent)
- char *indent;
+wrap_here (char *indent)
{
/* This should have been allocated, but be paranoid anyway. */
if (!wrap_buffer)
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
if (wrap_buffer[0])
{
line. Otherwise do nothing. */
void
-begin_line ()
+begin_line (void)
{
if (chars_printed > 0)
{
routine should not be called when cleanups are not in place. */
static void
-fputs_maybe_filtered (linebuffer, stream, filter)
- const char *linebuffer;
- struct ui_file *stream;
- int filter;
+fputs_maybe_filtered (const char *linebuffer, struct ui_file *stream,
+ int filter)
{
const char *lineptr;
}
void
-fputs_filtered (linebuffer, stream)
- const char *linebuffer;
- struct ui_file *stream;
+fputs_filtered (const char *linebuffer, struct ui_file *stream)
{
fputs_maybe_filtered (linebuffer, stream, 1);
}
int
-putchar_unfiltered (c)
- int c;
+putchar_unfiltered (int c)
{
char buf = c;
ui_file_write (gdb_stdout, &buf, 1);
return c;
}
+/* Write character C to gdb_stdout using GDB's paging mechanism and return C.
+ May return nonlocally. */
+
int
-fputc_unfiltered (c, stream)
- int c;
- struct ui_file *stream;
+putchar_filtered (int c)
+{
+ return fputc_filtered (c, gdb_stdout);
+}
+
+int
+fputc_unfiltered (int c, struct ui_file *stream)
{
char buf = c;
ui_file_write (stream, &buf, 1);
}
int
-fputc_filtered (c, stream)
- int c;
- struct ui_file *stream;
+fputc_filtered (int c, struct ui_file *stream)
{
char buf[2];
characters in printable fashion. */
void
-puts_debug (prefix, string, suffix)
- char *prefix;
- char *string;
- char *suffix;
+puts_debug (char *prefix, char *string, char *suffix)
{
int ch;
called when cleanups are not in place. */
static void
-vfprintf_maybe_filtered (stream, format, args, filter)
- struct ui_file *stream;
- const char *format;
- va_list args;
- int filter;
+vfprintf_maybe_filtered (struct ui_file *stream, const char *format,
+ va_list args, int filter)
{
char *linebuffer;
struct cleanup *old_cleanups;
- vasprintf (&linebuffer, format, args);
- if (linebuffer == NULL)
- {
- fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
- exit (1);
- }
- old_cleanups = make_cleanup (free, linebuffer);
+ xvasprintf (&linebuffer, format, args);
+ old_cleanups = make_cleanup (xfree, linebuffer);
fputs_maybe_filtered (linebuffer, stream, filter);
do_cleanups (old_cleanups);
}
void
-vfprintf_filtered (stream, format, args)
- struct ui_file *stream;
- const char *format;
- va_list args;
+vfprintf_filtered (struct ui_file *stream, const char *format, va_list args)
{
vfprintf_maybe_filtered (stream, format, args, 1);
}
void
-vfprintf_unfiltered (stream, format, args)
- struct ui_file *stream;
- const char *format;
- va_list args;
+vfprintf_unfiltered (struct ui_file *stream, const char *format, va_list args)
{
char *linebuffer;
struct cleanup *old_cleanups;
- vasprintf (&linebuffer, format, args);
- if (linebuffer == NULL)
- {
- fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
- exit (1);
- }
- old_cleanups = make_cleanup (free, linebuffer);
+ xvasprintf (&linebuffer, format, args);
+ old_cleanups = make_cleanup (xfree, linebuffer);
fputs_unfiltered (linebuffer, stream);
do_cleanups (old_cleanups);
}
void
-vprintf_filtered (format, args)
- const char *format;
- va_list args;
+vprintf_filtered (const char *format, va_list args)
{
vfprintf_maybe_filtered (gdb_stdout, format, args, 1);
}
void
-vprintf_unfiltered (format, args)
- const char *format;
- va_list args;
+vprintf_unfiltered (const char *format, va_list args)
{
vfprintf_unfiltered (gdb_stdout, format, args);
}
This one doesn't, and had better not! */
void
-puts_filtered (string)
- const char *string;
+puts_filtered (const char *string)
{
fputs_filtered (string, gdb_stdout);
}
void
-puts_unfiltered (string)
- const char *string;
+puts_unfiltered (const char *string)
{
fputs_unfiltered (string, gdb_stdout);
}
/* Return a pointer to N spaces and a null. The pointer is good
until the next call to here. */
char *
-n_spaces (n)
- int n;
+n_spaces (int n)
{
char *t;
static char *spaces = 0;
if (n > max_spaces)
{
if (spaces)
- free (spaces);
+ xfree (spaces);
spaces = (char *) xmalloc (n + 1);
for (t = spaces + n; t != spaces;)
*--t = ' ';
/* Print N spaces. */
void
-print_spaces_filtered (n, stream)
- int n;
- struct ui_file *stream;
+print_spaces_filtered (int n, struct ui_file *stream)
{
fputs_filtered (n_spaces (n), stream);
}
demangling is off, the name is printed in its "raw" form. */
void
-fprintf_symbol_filtered (stream, name, lang, arg_mode)
- struct ui_file *stream;
- char *name;
- enum language lang;
- int arg_mode;
+fprintf_symbol_filtered (struct ui_file *stream, char *name, enum language lang,
+ int arg_mode)
{
char *demangled;
fputs_filtered (demangled ? demangled : name, stream);
if (demangled != NULL)
{
- free (demangled);
+ xfree (demangled);
}
}
}
function). */
int
-strcmp_iw (string1, string2)
- const char *string1;
- const char *string2;
+strcmp_iw (const char *string1, const char *string2)
{
while ((*string1 != '\0') && (*string2 != '\0'))
{
** at index 0.
*/
int
-subset_compare (string_to_compare, template_string)
- char *string_to_compare;
- char *template_string;
+subset_compare (char *string_to_compare, char *template_string)
{
int match;
if (template_string != (char *) NULL && string_to_compare != (char *) NULL &&
}
-static void pagination_on_command PARAMS ((char *arg, int from_tty));
+static void pagination_on_command (char *arg, int from_tty);
static void
-pagination_on_command (arg, from_tty)
- char *arg;
- int from_tty;
+pagination_on_command (char *arg, int from_tty)
{
pagination_enabled = 1;
}
-static void pagination_on_command PARAMS ((char *arg, int from_tty));
+static void pagination_on_command (char *arg, int from_tty);
static void
-pagination_off_command (arg, from_tty)
- char *arg;
- int from_tty;
+pagination_off_command (char *arg, int from_tty)
{
pagination_enabled = 0;
}
\f
void
-initialize_utils ()
+initialize_utils (void)
{
struct cmd_list_element *c;
"Set number of characters gdb thinks are in a line.",
&setlist);
add_show_from_set (c, &showlist);
- c->function.sfunc = set_width_command;
+ set_cmd_sfunc (c, set_width_command);
add_show_from_set
(add_set_cmd ("height", class_support,
var_boolean, (char *) &pagination_enabled,
"Set state of pagination.", &setlist),
&showlist);
+
if (xdb_commands)
{
add_com ("am", class_support, pagination_on_command,
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
-#endif
-\f
-/* Support for converting target fp numbers into host DOUBLEST format. */
-
-/* XXX - This code should really be in libiberty/floatformat.c, however
- configuration issues with libiberty made this very difficult to do in the
- available time. */
-
-#include "floatformat.h"
-#include <math.h> /* ldexp */
-
-/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
- going to bother with trying to muck around with whether it is defined in
- a system header, what we do if not, etc. */
-#define FLOATFORMAT_CHAR_BIT 8
-
-static unsigned long get_field PARAMS ((unsigned char *,
- enum floatformat_byteorders,
- unsigned int,
- unsigned int,
- unsigned int));
-
-/* Extract a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static unsigned long
-get_field (data, order, total_len, start, len)
- unsigned char *data;
- enum floatformat_byteorders order;
- unsigned int total_len;
- unsigned int start;
- unsigned int len;
-{
- unsigned long result;
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- /* We start counting from the other end (i.e, from the high bytes
- rather than the low bytes). As such, we need to be concerned
- with what happens if bit 0 doesn't start on a byte boundary.
- I.e, we need to properly handle the case where total_len is
- not evenly divisible by 8. So we compute ``excess'' which
- represents the number of bits from the end of our starting
- byte needed to get to bit 0. */
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- result = *(data + cur_byte) >> (-cur_bitshift);
- else
- result = 0;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- result |= (unsigned long)*(data + cur_byte) << cur_bitshift;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
- if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT)
- /* Mask out bits which are not part of the field */
- result &= ((1UL << len) - 1);
- return result;
-}
-
-/* Convert from FMT to a DOUBLEST.
- FROM is the address of the extended float.
- Store the DOUBLEST in *TO. */
-
-void
-floatformat_to_doublest (fmt, from, to)
- const struct floatformat *fmt;
- char *from;
- DOUBLEST *to;
-{
- unsigned char *ufrom = (unsigned char *) from;
- DOUBLEST dto;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- int special_exponent; /* It's a NaN, denorm or zero */
-
- /* If the mantissa bits are not contiguous from one end of the
- mantissa to the other, we need to make a private copy of the
- source bytes that is in the right order since the unpacking
- algorithm assumes that the bits are contiguous.
-
- Swap the bytes individually rather than accessing them through
- "long *" since we have no guarantee that they start on a long
- alignment, and also sizeof(long) for the host could be different
- than sizeof(long) for the target. FIXME: Assumes sizeof(long)
- for the target is 4. */
-
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- static unsigned char *newfrom;
- unsigned char *swapin, *swapout;
- int longswaps;
-
- longswaps = fmt->totalsize / FLOATFORMAT_CHAR_BIT;
- longswaps >>= 3;
-
- if (newfrom == NULL)
- {
- newfrom = (unsigned char *) xmalloc (fmt->totalsize);
- }
- swapout = newfrom;
- swapin = ufrom;
- ufrom = newfrom;
- while (longswaps-- > 0)
- {
- /* This is ugly, but efficient */
- *swapout++ = swapin[4];
- *swapout++ = swapin[5];
- *swapout++ = swapin[6];
- *swapout++ = swapin[7];
- *swapout++ = swapin[0];
- *swapout++ = swapin[1];
- *swapout++ = swapin[2];
- *swapout++ = swapin[3];
- swapin += 8;
- }
- }
-
- exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
- /* Note that if exponent indicates a NaN, we can't really do anything useful
- (not knowing if the host has NaN's, or how to build one). So it will
- end up as an infinity or something close; that is OK. */
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- dto = 0.0;
-
- special_exponent = exponent == 0 || exponent == fmt->exp_nan;
-
-/* Don't bias NaNs. Use minimum exponent for denorms. For simplicity,
- we don't check for zero as the exponent doesn't matter. */
- if (!special_exponent)
- exponent -= fmt->exp_bias;
- else if (exponent == 0)
- exponent = 1 - fmt->exp_bias;
-
- /* Build the result algebraically. Might go infinite, underflow, etc;
- who cares. */
-
-/* If this format uses a hidden bit, explicitly add it in now. Otherwise,
- increment the exponent by one to account for the integer bit. */
-
- if (!special_exponent)
- {
- if (fmt->intbit == floatformat_intbit_no)
- dto = ldexp (1.0, exponent);
- else
- exponent++;
- }
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- dto += ldexp ((double) mant, exponent - mant_bits);
- exponent -= mant_bits;
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- /* Negate it if negative. */
- if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
- dto = -dto;
- *to = dto;
-}
-\f
-static void put_field PARAMS ((unsigned char *, enum floatformat_byteorders,
- unsigned int,
- unsigned int,
- unsigned int,
- unsigned long));
-
-/* Set a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static void
-put_field (data, order, total_len, start, len, stuff_to_put)
- unsigned char *data;
- enum floatformat_byteorders order;
- unsigned int total_len;
- unsigned int start;
- unsigned int len;
- unsigned long stuff_to_put;
-{
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- {
- *(data + cur_byte) &=
- ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1)
- << (-cur_bitshift));
- *(data + cur_byte) |=
- (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
- }
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
- {
- /* This is the last byte. */
- *(data + cur_byte) &=
- ~((1 << (len - cur_bitshift)) - 1);
- *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
- }
- else
- *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
- & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
-}
-
-#ifdef HAVE_LONG_DOUBLE
-/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
- The range of the returned value is >= 0.5 and < 1.0. This is equivalent to
- frexp, but operates on the long double data type. */
-
-static long double ldfrexp PARAMS ((long double value, int *eptr));
-
-static long double
-ldfrexp (value, eptr)
- long double value;
- int *eptr;
-{
- long double tmp;
- int exp;
-
- /* Unfortunately, there are no portable functions for extracting the exponent
- of a long double, so we have to do it iteratively by multiplying or dividing
- by two until the fraction is between 0.5 and 1.0. */
-
- if (value < 0.0l)
- value = -value;
-
- tmp = 1.0l;
- exp = 0;
-
- if (value >= tmp) /* Value >= 1.0 */
- while (value >= tmp)
- {
- tmp *= 2.0l;
- exp++;
- }
- else if (value != 0.0l) /* Value < 1.0 and > 0.0 */
- {
- while (value < tmp)
- {
- tmp /= 2.0l;
- exp--;
- }
- tmp *= 2.0l;
- exp++;
- }
-
- *eptr = exp;
- return value / tmp;
-}
-#endif /* HAVE_LONG_DOUBLE */
-
-
-/* The converse: convert the DOUBLEST *FROM to an extended float
- and store where TO points. Neither FROM nor TO have any alignment
- restrictions. */
-
-void
-floatformat_from_doublest (fmt, from, to)
- CONST struct floatformat *fmt;
- DOUBLEST *from;
- char *to;
-{
- DOUBLEST dfrom;
- int exponent;
- DOUBLEST mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- unsigned char *uto = (unsigned char *) to;
-
- memcpy (&dfrom, from, sizeof (dfrom));
- memset (uto, 0, fmt->totalsize / FLOATFORMAT_CHAR_BIT);
- if (dfrom == 0)
- return; /* Result is zero */
- if (dfrom != dfrom) /* Result is NaN */
- {
- /* From is NaN */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Be sure it's not infinity, but NaN value is irrel */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- 32, 1);
- return;
- }
-
- /* If negative, set the sign bit. */
- if (dfrom < 0)
- {
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
- dfrom = -dfrom;
- }
-
- if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */
- {
- /* Infinity exponent is same as NaN's. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Infinity mantissa is all zeroes. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- fmt->man_len, 0);
- return;
- }
-
-#ifdef HAVE_LONG_DOUBLE
- mant = ldfrexp (dfrom, &exponent);
-#else
- mant = frexp (dfrom, &exponent);
#endif
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
- exponent + fmt->exp_bias - 1);
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- while (mant_bits_left > 0)
- {
- unsigned long mant_long;
- mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
-
- mant *= 4294967296.0;
- mant_long = (unsigned long) mant;
- mant -= mant_long;
-
- /* If the integer bit is implicit, then we need to discard it.
- If we are discarding a zero, we should be (but are not) creating
- a denormalized number which means adjusting the exponent
- (I think). */
- if (mant_bits_left == fmt->man_len
- && fmt->intbit == floatformat_intbit_no)
- {
- mant_long <<= 1;
- mant_bits -= 1;
- }
-
- if (mant_bits < 32)
- {
- /* The bits we want are in the most significant MANT_BITS bits of
- mant_long. Move them to the least significant. */
- mant_long >>= 32 - mant_bits;
- }
-
- put_field (uto, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits, mant_long);
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- int count;
- unsigned char *swaplow = uto;
- unsigned char *swaphigh = uto + 4;
- unsigned char tmp;
-
- for (count = 0; count < 4; count++)
- {
- tmp = *swaplow;
- *swaplow++ = *swaphigh;
- *swaphigh++ = tmp;
- }
- }
-}
+/* print routines to handle variable size regs, etc. */
/* temporary storage using circular buffer */
#define NUMCELLS 16
#define CELLSIZE 32
static char *
-get_cell ()
+get_cell (void)
{
static char buf[NUMCELLS][CELLSIZE];
static int cell = 0;
return buf[cell];
}
-/* print routines to handle variable size regs, etc.
-
- FIXME: Note that t_addr is a bfd_vma, which is currently either an
- unsigned long or unsigned long long, determined at configure time.
- If t_addr is an unsigned long long and sizeof (unsigned long long)
- is greater than sizeof (unsigned long), then I believe this code will
- probably lose, at least for little endian machines. I believe that
- it would also be better to eliminate the switch on the absolute size
- of t_addr and replace it with a sequence of if statements that compare
- sizeof t_addr with sizeof the various types and do the right thing,
- which includes knowing whether or not the host supports long long.
- -fnf
-
- */
-
int
strlen_paddr (void)
{
- return (TARGET_PTR_BIT / 8 * 2);
+ return (TARGET_ADDR_BIT / 8 * 2);
}
-
-/* eliminate warning from compiler on 32-bit systems */
-static int thirty_two = 32;
-
char *
paddr (CORE_ADDR addr)
{
- char *paddr_str = get_cell ();
- switch (TARGET_PTR_BIT / 8)
- {
- case 8:
- sprintf (paddr_str, "%08lx%08lx",
- (unsigned long) (addr >> thirty_two), (unsigned long) (addr & 0xffffffff));
- break;
- case 4:
- sprintf (paddr_str, "%08lx", (unsigned long) addr);
- break;
- case 2:
- sprintf (paddr_str, "%04x", (unsigned short) (addr & 0xffff));
- break;
- default:
- sprintf (paddr_str, "%lx", (unsigned long) addr);
- }
- return paddr_str;
+ return phex (addr, TARGET_ADDR_BIT / 8);
}
char *
paddr_nz (CORE_ADDR addr)
{
- char *paddr_str = get_cell ();
- switch (TARGET_PTR_BIT / 8)
- {
- case 8:
- {
- unsigned long high = (unsigned long) (addr >> thirty_two);
- if (high == 0)
- sprintf (paddr_str, "%lx", (unsigned long) (addr & 0xffffffff));
- else
- sprintf (paddr_str, "%lx%08lx",
- high, (unsigned long) (addr & 0xffffffff));
- break;
- }
- case 4:
- sprintf (paddr_str, "%lx", (unsigned long) addr);
- break;
- case 2:
- sprintf (paddr_str, "%x", (unsigned short) (addr & 0xffff));
- break;
- default:
- sprintf (paddr_str, "%lx", (unsigned long) addr);
- }
- return paddr_str;
+ return phex_nz (addr, TARGET_ADDR_BIT / 8);
}
static void
sign, temp[2], temp[1], temp[0]);
break;
default:
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
}
return paddr_str;
}
+/* eliminate warning from compiler on 32-bit systems */
+static int thirty_two = 32;
+
char *
-preg (reg)
- t_reg reg;
+phex (ULONGEST l, int sizeof_l)
{
- char *preg_str = get_cell ();
- switch (sizeof (t_reg))
+ char *str;
+ switch (sizeof_l)
{
case 8:
- sprintf (preg_str, "%08lx%08lx",
- (unsigned long) (reg >> thirty_two), (unsigned long) (reg & 0xffffffff));
+ str = get_cell ();
+ sprintf (str, "%08lx%08lx",
+ (unsigned long) (l >> thirty_two),
+ (unsigned long) (l & 0xffffffff));
break;
case 4:
- sprintf (preg_str, "%08lx", (unsigned long) reg);
+ str = get_cell ();
+ sprintf (str, "%08lx", (unsigned long) l);
break;
case 2:
- sprintf (preg_str, "%04x", (unsigned short) (reg & 0xffff));
+ str = get_cell ();
+ sprintf (str, "%04x", (unsigned short) (l & 0xffff));
break;
default:
- sprintf (preg_str, "%lx", (unsigned long) reg);
+ str = phex (l, sizeof (l));
+ break;
}
- return preg_str;
+ return str;
}
char *
-preg_nz (reg)
- t_reg reg;
+phex_nz (ULONGEST l, int sizeof_l)
{
- char *preg_str = get_cell ();
- switch (sizeof (t_reg))
+ char *str;
+ switch (sizeof_l)
{
case 8:
{
- unsigned long high = (unsigned long) (reg >> thirty_two);
+ unsigned long high = (unsigned long) (l >> thirty_two);
+ str = get_cell ();
if (high == 0)
- sprintf (preg_str, "%lx", (unsigned long) (reg & 0xffffffff));
+ sprintf (str, "%lx", (unsigned long) (l & 0xffffffff));
else
- sprintf (preg_str, "%lx%08lx",
- high, (unsigned long) (reg & 0xffffffff));
+ sprintf (str, "%lx%08lx",
+ high, (unsigned long) (l & 0xffffffff));
break;
}
case 4:
- sprintf (preg_str, "%lx", (unsigned long) reg);
+ str = get_cell ();
+ sprintf (str, "%lx", (unsigned long) l);
break;
case 2:
- sprintf (preg_str, "%x", (unsigned short) (reg & 0xffff));
+ str = get_cell ();
+ sprintf (str, "%x", (unsigned short) (l & 0xffff));
break;
default:
- sprintf (preg_str, "%lx", (unsigned long) reg);
+ str = phex_nz (l, sizeof (l));
+ break;
}
- return preg_str;
+ return str;
}
-/* Helper functions for INNER_THAN */
-int
-core_addr_lessthan (lhs, rhs)
- CORE_ADDR lhs;
- CORE_ADDR rhs;
+
+/* Convert to / from the hosts pointer to GDB's internal CORE_ADDR
+ using the target's conversion routines. */
+CORE_ADDR
+host_pointer_to_address (void *ptr)
{
- return (lhs < rhs);
+ if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
+ internal_error (__FILE__, __LINE__,
+ "core_addr_to_void_ptr: bad cast");
+ return POINTER_TO_ADDRESS (builtin_type_void_data_ptr, &ptr);
}
-int
-core_addr_greaterthan (lhs, rhs)
- CORE_ADDR lhs;
- CORE_ADDR rhs;
+void *
+address_to_host_pointer (CORE_ADDR addr)
{
- return (lhs > rhs);
+ void *ptr;
+ if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
+ internal_error (__FILE__, __LINE__,
+ "core_addr_to_void_ptr: bad cast");
+ ADDRESS_TO_POINTER (builtin_type_void_data_ptr, &ptr, addr);
+ return ptr;
+}
+
+/* Convert a CORE_ADDR into a string. */
+const char *
+core_addr_to_string (const CORE_ADDR addr)
+{
+ char *str = get_cell ();
+ strcpy (str, "0x");
+ strcat (str, phex (addr, sizeof (addr)));
+ return str;
+}
+
+const char *
+core_addr_to_string_nz (const CORE_ADDR addr)
+{
+ char *str = get_cell ();
+ strcpy (str, "0x");
+ strcat (str, phex_nz (addr, sizeof (addr)));
+ return str;
+}
+
+/* Convert a string back into a CORE_ADDR. */
+CORE_ADDR
+string_to_core_addr (const char *my_string)
+{
+ CORE_ADDR addr = 0;
+ if (my_string[0] == '0' && tolower (my_string[1]) == 'x')
+ {
+ /* Assume that it is in decimal. */
+ int i;
+ for (i = 2; my_string[i] != '\0'; i++)
+ {
+ if (isdigit (my_string[i]))
+ addr = (my_string[i] - '0') + (addr * 16);
+ else if (isxdigit (my_string[i]))
+ addr = (tolower (my_string[i]) - 'a' + 0xa) + (addr * 16);
+ else
+ internal_error (__FILE__, __LINE__, "invalid hex");
+ }
+ }
+ else
+ {
+ /* Assume that it is in decimal. */
+ int i;
+ for (i = 0; my_string[i] != '\0'; i++)
+ {
+ if (isdigit (my_string[i]))
+ addr = (my_string[i] - '0') + (addr * 10);
+ else
+ internal_error (__FILE__, __LINE__, "invalid decimal");
+ }
+ }
+ return addr;
+}
+
+char *
+gdb_realpath (const char *filename)
+{
+#if defined(HAVE_REALPATH)
+# if defined (PATH_MAX)
+ char buf[PATH_MAX];
+# define USE_REALPATH
+# elif defined (MAXPATHLEN)
+ char buf[MAXPATHLEN];
+# define USE_REALPATH
+# elif defined (HAVE_UNISTD_H) && defined(HAVE_ALLOCA)
+ char *buf = alloca ((size_t)pathconf ("/", _PC_PATH_MAX));
+# define USE_REALPATH
+# endif
+#endif /* HAVE_REALPATH */
+
+#if defined(USE_REALPATH)
+ char *rp = realpath (filename, buf);
+ return xstrdup (rp ? rp : filename);
+#elif defined(HAVE_CANONICALIZE_FILE_NAME)
+ char *rp = canonicalize_file_name (filename);
+ if (rp == NULL)
+ return xstrdup (filename);
+ else
+ return rp;
+#else
+ return xstrdup (filename);
+#endif
+}
+
+/* Return a copy of FILENAME, with its directory prefix canonicalized
+ by gdb_realpath. */
+
+char *
+xfullpath (const char *filename)
+{
+ const char *base_name = lbasename (filename);
+ char *dir_name;
+ char *real_path;
+ char *result;
+
+ /* Extract the basename of filename, and return immediately
+ a copy of filename if it does not contain any directory prefix. */
+ if (base_name == filename)
+ return xstrdup (filename);
+
+ dir_name = alloca ((size_t) (base_name - filename + 2));
+ /* Allocate enough space to store the dir_name + plus one extra
+ character sometimes needed under Windows (see below), and
+ then the closing \000 character */
+ strncpy (dir_name, filename, base_name - filename);
+ dir_name[base_name - filename] = '\000';
+
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+ /* We need to be careful when filename is of the form 'd:foo', which
+ is equivalent of d:./foo, which is totally different from d:/foo. */
+ if (strlen (dir_name) == 2 &&
+ isalpha (dir_name[0]) && dir_name[1] == ':')
+ {
+ dir_name[2] = '.';
+ dir_name[3] = '\000';
+ }
+#endif
+
+ /* Canonicalize the directory prefix, and build the resulting
+ filename. If the dirname realpath already contains an ending
+ directory separator, avoid doubling it. */
+ real_path = gdb_realpath (dir_name);
+ if (IS_DIR_SEPARATOR (real_path[strlen (real_path) - 1]))
+ result = concat (real_path, base_name, NULL);
+ else
+ result = concat (real_path, SLASH_STRING, base_name, NULL);
+
+ xfree (real_path);
+ return result;
}