/* Print values for GDB, the GNU debugger.
Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009 Free Software Foundation, Inc.
This file is part of GDB.
void _initialize_valprint (void);
-/* Maximum number of chars to print for a string pointer value or vector
- contents, or UINT_MAX for no limit. Note that "set print elements 0"
- stores UINT_MAX in print_max, which displays in a show command as
- "unlimited". */
-
-unsigned int print_max;
#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
+
+struct value_print_options user_print_options =
+{
+ Val_pretty_default, /* pretty */
+ 0, /* prettyprint_arrays */
+ 0, /* prettyprint_structs */
+ 0, /* vtblprint */
+ 1, /* unionprint */
+ 1, /* addressprint */
+ 0, /* objectprint */
+ PRINT_MAX_DEFAULT, /* print_max */
+ 10, /* repeat_count_threshold */
+ 0, /* output_format */
+ 0, /* format */
+ 0, /* stop_print_at_null */
+ 0, /* inspect_it */
+ 0, /* print_array_indexes */
+ 0, /* deref_ref */
+ 1, /* static_field_print */
+ 1 /* pascal_static_field_print */
+};
+
+/* Initialize *OPTS to be a copy of the user print options. */
+void
+get_user_print_options (struct value_print_options *opts)
+{
+ *opts = user_print_options;
+}
+
+/* Initialize *OPTS to be a copy of the user print options, but with
+ pretty-printing disabled. */
+void
+get_raw_print_options (struct value_print_options *opts)
+{
+ *opts = user_print_options;
+ opts->pretty = Val_no_prettyprint;
+}
+
+/* Initialize *OPTS to be a copy of the user print options, but using
+ FORMAT as the formatting option. */
+void
+get_formatted_print_options (struct value_print_options *opts,
+ char format)
+{
+ *opts = user_print_options;
+ opts->format = format;
+}
+
static void
show_print_max (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
Default output radix for printing of values is %s.\n"),
value);
}
-int output_format = 0;
/* By default we print arrays without printing the index of each element in
the array. This behavior can be changed by setting PRINT_ARRAY_INDEXES. */
-static int print_array_indexes = 0;
static void
show_print_array_indexes (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
element in an array. Referenced by the low level language dependent
print routines. */
-unsigned int repeat_count_threshold = 10;
static void
show_repeat_count_threshold (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* If nonzero, stops printing of char arrays at first null. */
-int stop_print_at_null;
static void
show_stop_print_at_null (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* Controls pretty printing of structures. */
-int prettyprint_structs;
static void
show_prettyprint_structs (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* Controls pretty printing of arrays. */
-int prettyprint_arrays;
static void
show_prettyprint_arrays (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* If nonzero, causes unions inside structures or other unions to be
printed. */
-int unionprint; /* Controls printing of nested unions. */
static void
show_unionprint (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* If nonzero, causes machine addresses to be printed in certain contexts. */
-int addressprint; /* Controls printing of machine addresses */
static void
show_addressprint (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* Print using the given LANGUAGE the data of type TYPE located at VALADDR
(within GDB), which came from the inferior at address ADDRESS, onto
- stdio stream STREAM according to FORMAT (a letter, or 0 for natural
- format using TYPE).
-
- If DEREF_REF is nonzero, then dereference references, otherwise just print
- them like pointers.
-
- The PRETTY parameter controls prettyprinting.
+ stdio stream STREAM according to OPTIONS.
If the data are a string pointer, returns the number of string characters
printed.
int
val_print (struct type *type, const gdb_byte *valaddr, int embedded_offset,
- CORE_ADDR address, struct ui_file *stream, int format,
- int deref_ref, int recurse, enum val_prettyprint pretty,
+ CORE_ADDR address, struct ui_file *stream, int recurse,
+ const struct value_print_options *options,
const struct language_defn *language)
{
volatile struct gdb_exception except;
- volatile enum val_prettyprint real_pretty = pretty;
int ret = 0;
-
+ struct value_print_options local_opts = *options;
struct type *real_type = check_typedef (type);
- if (pretty == Val_pretty_default)
- real_pretty = prettyprint_structs ? Val_prettyprint : Val_no_prettyprint;
+
+ if (local_opts.pretty == Val_pretty_default)
+ local_opts.pretty = (local_opts.prettyprint_structs
+ ? Val_prettyprint : Val_no_prettyprint);
QUIT;
TRY_CATCH (except, RETURN_MASK_ERROR)
{
ret = language->la_val_print (type, valaddr, embedded_offset, address,
- stream, format, deref_ref, recurse,
- real_pretty);
+ stream, recurse, &local_opts);
}
if (except.reason < 0)
fprintf_filtered (stream, _("<error reading variable>"));
}
/* Print using the given LANGUAGE the value VAL onto stream STREAM according
- to FORMAT (a letter, or 0 for natural format using TYPE).
-
- If DEREF_REF is nonzero, then dereference references, otherwise just print
- them like pointers.
-
- The PRETTY parameter controls prettyprinting.
+ to OPTIONS.
If the data are a string pointer, returns the number of string characters
printed.
GDB's value mechanism. */
int
-common_val_print (struct value *val, struct ui_file *stream, int format,
- int deref_ref, int recurse, enum val_prettyprint pretty,
+common_val_print (struct value *val, struct ui_file *stream, int recurse,
+ const struct value_print_options *options,
const struct language_defn *language)
{
if (!value_check_printable (val, stream))
return val_print (value_type (val), value_contents_all (val),
value_embedded_offset (val), VALUE_ADDRESS (val),
- stream, format, deref_ref, recurse, pretty,
- language);
+ stream, recurse, options, language);
}
-/* Print the value VAL in C-ish syntax on stream STREAM.
- FORMAT is a format-letter, or 0 for print in natural format of data type.
+/* Print the value VAL in C-ish syntax on stream STREAM according to
+ OPTIONS.
If the object printed is a string pointer, returns
the number of string bytes printed. */
int
-value_print (struct value *val, struct ui_file *stream, int format,
- enum val_prettyprint pretty)
+value_print (struct value *val, struct ui_file *stream,
+ const struct value_print_options *options)
{
if (!value_check_printable (val, stream))
return 0;
- return LA_VALUE_PRINT (val, stream, format, pretty);
+ return LA_VALUE_PRINT (val, stream, options);
}
/* Called by various <lang>_val_print routines to print
}
}
-/* Return non-zero if the debugger should print the index of each element
- when printing array values. */
-
-int
-print_array_indexes_p (void)
-{
- return print_array_indexes;
-}
-
/* Assuming TYPE is a simple, non-empty array type, compute its upper
and lower bound. Save the low bound into LOW_BOUND if not NULL.
Save the high bound into HIGH_BOUND if not NULL.
return 1;
}
-/* Print on STREAM using the given FORMAT the index for the element
+/* Print on STREAM using the given OPTIONS the index for the element
at INDEX of an array whose index type is INDEX_TYPE. */
void
maybe_print_array_index (struct type *index_type, LONGEST index,
- struct ui_file *stream, int format,
- enum val_prettyprint pretty)
+ struct ui_file *stream,
+ const struct value_print_options *options)
{
struct value *index_value;
- if (!print_array_indexes)
+ if (!options->print_array_indexes)
return;
index_value = value_from_longest (index_type, index);
- LA_PRINT_ARRAY_INDEX (index_value, stream, format, pretty);
-}
+ LA_PRINT_ARRAY_INDEX (index_value, stream, options);
+}
/* Called by various <lang>_val_print routines to print elements of an
array in the form "<elem1>, <elem2>, <elem3>, ...".
void
val_print_array_elements (struct type *type, const gdb_byte *valaddr,
CORE_ADDR address, struct ui_file *stream,
- int format, int deref_ref,
- int recurse, enum val_prettyprint pretty,
+ int recurse,
+ const struct value_print_options *options,
unsigned int i)
{
unsigned int things_printed = 0;
annotate_array_section_begin (i, elttype);
- for (; i < len && things_printed < print_max; i++)
+ for (; i < len && things_printed < options->print_max; i++)
{
if (i != 0)
{
- if (prettyprint_arrays)
+ if (options->prettyprint_arrays)
{
fprintf_filtered (stream, ",\n");
print_spaces_filtered (2 + 2 * recurse, stream);
}
wrap_here (n_spaces (2 + 2 * recurse));
maybe_print_array_index (index_type, i + low_bound_index,
- stream, format, pretty);
+ stream, options);
rep1 = i + 1;
reps = 1;
++rep1;
}
- if (reps > repeat_count_threshold)
+ if (reps > options->repeat_count_threshold)
{
- val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
- deref_ref, recurse + 1, pretty, current_language);
+ val_print (elttype, valaddr + i * eltlen, 0, address + i * eltlen,
+ stream, recurse + 1, options, current_language);
annotate_elt_rep (reps);
fprintf_filtered (stream, " <repeats %u times>", reps);
annotate_elt_rep_end ();
i = rep1 - 1;
- things_printed += repeat_count_threshold;
+ things_printed += options->repeat_count_threshold;
}
else
{
- val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
- deref_ref, recurse + 1, pretty, current_language);
+ val_print (elttype, valaddr + i * eltlen, 0, address + i * eltlen,
+ stream, recurse + 1, options, current_language);
annotate_elt ();
things_printed++;
}
return (nread);
}
-/* Print a string from the inferior, starting at ADDR and printing up to LEN
- characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
- stops at the first null byte, otherwise printing proceeds (including null
- bytes) until either print_max or LEN characters have been printed,
- whichever is smaller. */
-
-/* FIXME: Use target_read_string. */
+/* Read a string from the inferior, at ADDR, with LEN characters of WIDTH bytes
+ each. Fetch at most FETCHLIMIT characters. BUFFER will be set to a newly
+ allocated buffer containing the string, which the caller is responsible to
+ free, and BYTES_READ will be set to the number of bytes read. Returns 0 on
+ success, or errno on failure.
-int
-val_print_string (CORE_ADDR addr, int len, int width, struct ui_file *stream)
-{
- int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
- int errcode; /* Errno returned from bad reads. */
- unsigned int fetchlimit; /* Maximum number of chars to print. */
- unsigned int nfetch; /* Chars to fetch / chars fetched. */
- unsigned int chunksize; /* Size of each fetch, in chars. */
- gdb_byte *buffer = NULL; /* Dynamically growable fetch buffer. */
- gdb_byte *bufptr; /* Pointer to next available byte in buffer. */
- gdb_byte *limit; /* First location past end of fetch buffer. */
- struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
- int found_nul; /* Non-zero if we found the nul char */
+ If LEN > 0, reads exactly LEN characters (including eventual NULs in
+ the middle or end of the string). If LEN is -1, stops at the first
+ null character (not necessarily the first null byte) up to a maximum
+ of FETCHLIMIT characters. Set FETCHLIMIT to UINT_MAX to read as many
+ characters as possible from the string.
- /* First we need to figure out the limit on the number of characters we are
- going to attempt to fetch and print. This is actually pretty simple. If
- LEN >= zero, then the limit is the minimum of LEN and print_max. If
- LEN is -1, then the limit is print_max. This is true regardless of
- whether print_max is zero, UINT_MAX (unlimited), or something in between,
- because finding the null byte (or available memory) is what actually
- limits the fetch. */
+ Unless an exception is thrown, BUFFER will always be allocated, even on
+ failure. In this case, some characters might have been read before the
+ failure happened. Check BYTES_READ to recognize this situation.
- fetchlimit = (len == -1 ? print_max : min (len, print_max));
+ Note: There was a FIXME asking to make this code use target_read_string,
+ but this function is more general (can read past null characters, up to
+ given LEN). Besides, it is used much more often than target_read_string
+ so it is more tested. Perhaps callers of target_read_string should use
+ this function instead? */
- /* Now decide how large of chunks to try to read in one operation. This
+int
+read_string (CORE_ADDR addr, int len, int width, unsigned int fetchlimit,
+ gdb_byte **buffer, int *bytes_read)
+{
+ int found_nul; /* Non-zero if we found the nul char. */
+ int errcode; /* Errno returned from bad reads. */
+ unsigned int nfetch; /* Chars to fetch / chars fetched. */
+ unsigned int chunksize; /* Size of each fetch, in chars. */
+ gdb_byte *bufptr; /* Pointer to next available byte in buffer. */
+ gdb_byte *limit; /* First location past end of fetch buffer. */
+ struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+
+ /* Decide how large of chunks to try to read in one operation. This
is also pretty simple. If LEN >= zero, then we want fetchlimit chars,
so we might as well read them all in one operation. If LEN is -1, we
- are looking for a null terminator to end the fetching, so we might as
+ are looking for a NUL terminator to end the fetching, so we might as
well read in blocks that are large enough to be efficient, but not so
large as to be slow if fetchlimit happens to be large. So we choose the
minimum of 8 and fetchlimit. We used to use 200 instead of 8 but
chunksize = (len == -1 ? min (8, fetchlimit) : fetchlimit);
- /* Loop until we either have all the characters to print, or we encounter
- some error, such as bumping into the end of the address space. */
+ /* Loop until we either have all the characters, or we encounter
+ some error, such as bumping into the end of the address space. */
found_nul = 0;
old_chain = make_cleanup (null_cleanup, 0);
if (len > 0)
{
- buffer = (gdb_byte *) xmalloc (len * width);
- bufptr = buffer;
- old_chain = make_cleanup (xfree, buffer);
+ *buffer = (gdb_byte *) xmalloc (len * width);
+ bufptr = *buffer;
+ old_chain = make_cleanup (xfree, *buffer);
nfetch = partial_memory_read (addr, bufptr, len * width, &errcode)
/ width;
else if (len == -1)
{
unsigned long bufsize = 0;
+
+ *buffer = NULL;
+
do
{
QUIT;
nfetch = min (chunksize, fetchlimit - bufsize);
- if (buffer == NULL)
- buffer = (gdb_byte *) xmalloc (nfetch * width);
+ if (*buffer == NULL)
+ *buffer = (gdb_byte *) xmalloc (nfetch * width);
else
{
discard_cleanups (old_chain);
- buffer = (gdb_byte *) xrealloc (buffer, (nfetch + bufsize) * width);
+ *buffer = (gdb_byte *) xrealloc (*buffer,
+ (nfetch + bufsize) * width);
}
- old_chain = make_cleanup (xfree, buffer);
- bufptr = buffer + bufsize * width;
+ old_chain = make_cleanup (xfree, *buffer);
+ bufptr = *buffer + bufsize * width;
bufsize += nfetch;
- /* Read as much as we can. */
+ /* Read as much as we can. */
nfetch = partial_memory_read (addr, bufptr, nfetch * width, &errcode)
- / width;
+ / width;
- /* Scan this chunk for the null byte that terminates the string
+ /* Scan this chunk for the null character that terminates the string
to print. If found, we don't need to fetch any more. Note
that bufptr is explicitly left pointing at the next character
- after the null byte, or at the next character after the end of
- the buffer. */
+ after the null character, or at the next character after the end
+ of the buffer. */
limit = bufptr + nfetch * width;
while (bufptr < limit)
if (c == 0)
{
/* We don't care about any error which happened after
- the NULL terminator. */
+ the NUL terminator. */
errcode = 0;
found_nul = 1;
break;
}
}
while (errcode == 0 /* no error */
- && bufptr - buffer < fetchlimit * width /* no overrun */
- && !found_nul); /* haven't found nul yet */
+ && bufptr - *buffer < fetchlimit * width /* no overrun */
+ && !found_nul); /* haven't found NUL yet */
}
else
- { /* length of string is really 0! */
- buffer = bufptr = NULL;
+ { /* Length of string is really 0! */
+ /* We always allocate *buffer. */
+ *buffer = bufptr = xmalloc (1);
errcode = 0;
}
/* bufptr and addr now point immediately beyond the last byte which we
consider part of the string (including a '\0' which ends the string). */
+ *bytes_read = bufptr - *buffer;
+
+ QUIT;
+
+ discard_cleanups (old_chain);
+
+ return errcode;
+}
+
+/* Print a string from the inferior, starting at ADDR and printing up to LEN
+ characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
+ stops at the first null byte, otherwise printing proceeds (including null
+ bytes) until either print_max or LEN characters have been printed,
+ whichever is smaller. */
+
+int
+val_print_string (CORE_ADDR addr, int len, int width, struct ui_file *stream,
+ const struct value_print_options *options)
+{
+ int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
+ int errcode; /* Errno returned from bad reads. */
+ int found_nul; /* Non-zero if we found the nul char */
+ unsigned int fetchlimit; /* Maximum number of chars to print. */
+ int bytes_read;
+ gdb_byte *buffer = NULL; /* Dynamically growable fetch buffer. */
+ struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+
+ /* First we need to figure out the limit on the number of characters we are
+ going to attempt to fetch and print. This is actually pretty simple. If
+ LEN >= zero, then the limit is the minimum of LEN and print_max. If
+ LEN is -1, then the limit is print_max. This is true regardless of
+ whether print_max is zero, UINT_MAX (unlimited), or something in between,
+ because finding the null byte (or available memory) is what actually
+ limits the fetch. */
+
+ fetchlimit = (len == -1 ? options->print_max : min (len, options->print_max));
+
+ errcode = read_string (addr, len, width, fetchlimit, &buffer, &bytes_read);
+ old_chain = make_cleanup (xfree, buffer);
+
+ addr += bytes_read;
/* We now have either successfully filled the buffer to fetchlimit, or
- terminated early due to an error or finding a null char when LEN is -1. */
+ terminated early due to an error or finding a null char when LEN is -1. */
+
+ /* Determine found_nul by looking at the last character read. */
+ found_nul = extract_unsigned_integer (buffer + bytes_read - width, width) == 0;
if (len == -1 && !found_nul)
{
gdb_byte *peekbuf;
- /* We didn't find a null terminator we were looking for. Attempt
+ /* We didn't find a NUL terminator we were looking for. Attempt
to peek at the next character. If not successful, or it is not
a null byte, then force ellipsis to be printed. */
&& extract_unsigned_integer (peekbuf, width) != 0)
force_ellipsis = 1;
}
- else if ((len >= 0 && errcode != 0) || (len > (bufptr - buffer) / width))
+ else if ((len >= 0 && errcode != 0) || (len > bytes_read / width))
{
/* Getting an error when we have a requested length, or fetching less
than the number of characters actually requested, always make us
- print ellipsis. */
+ print ellipsis. */
force_ellipsis = 1;
}
- QUIT;
-
/* If we get an error before fetching anything, don't print a string.
But if we fetch something and then get an error, print the string
and then the error message. */
- if (errcode == 0 || bufptr > buffer)
+ if (errcode == 0 || bytes_read > 0)
{
- if (addressprint)
+ if (options->addressprint)
{
fputs_filtered (" ", stream);
}
- LA_PRINT_STRING (stream, buffer, (bufptr - buffer) / width, width, force_ellipsis);
+ LA_PRINT_STRING (stream, buffer, bytes_read / width, width, force_ellipsis, options);
}
if (errcode != 0)
fprintf_filtered (stream, ": %s>", safe_strerror (errcode));
}
}
+
gdb_flush (stream);
do_cleanups (old_chain);
- return ((bufptr - buffer) / width);
+
+ return (bytes_read / width);
}
\f
+/* The 'set input-radix' command writes to this auxiliary variable.
+ If the requested radix is valid, INPUT_RADIX is updated; otherwise,
+ it is left unchanged. */
+
+static unsigned input_radix_1 = 10;
+
/* Validate an input or output radix setting, and make sure the user
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
static void
set_input_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- set_input_radix_1 (from_tty, input_radix);
+ set_input_radix_1 (from_tty, input_radix_1);
}
static void
if (radix < 2)
{
- /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
- value. */
+ input_radix_1 = input_radix;
error (_("Nonsense input radix ``decimal %u''; input radix unchanged."),
radix);
}
- input_radix = radix;
+ input_radix_1 = input_radix = radix;
if (from_tty)
{
printf_filtered (_("Input radix now set to decimal %u, hex %x, octal %o.\n"),
}
}
+/* The 'set output-radix' command writes to this auxiliary variable.
+ If the requested radix is valid, OUTPUT_RADIX is updated,
+ otherwise, it is left unchanged. */
+
+static unsigned output_radix_1 = 10;
+
static void
set_output_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- set_output_radix_1 (from_tty, output_radix);
+ set_output_radix_1 (from_tty, output_radix_1);
}
static void
switch (radix)
{
case 16:
- output_format = 'x'; /* hex */
+ user_print_options.output_format = 'x'; /* hex */
break;
case 10:
- output_format = 0; /* decimal */
+ user_print_options.output_format = 0; /* decimal */
break;
case 8:
- output_format = 'o'; /* octal */
+ user_print_options.output_format = 'o'; /* octal */
break;
default:
- /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
- value. */
+ output_radix_1 = output_radix;
error (_("Unsupported output radix ``decimal %u''; output radix unchanged."),
radix);
}
- output_radix = radix;
+ output_radix_1 = output_radix = radix;
if (from_tty)
{
printf_filtered (_("Output radix now set to decimal %u, hex %x, octal %o.\n"),
add_alias_cmd ("p", "print", no_class, 1, &showlist);
add_alias_cmd ("pr", "print", no_class, 1, &showlist);
- add_setshow_uinteger_cmd ("elements", no_class, &print_max, _("\
+ add_setshow_uinteger_cmd ("elements", no_class,
+ &user_print_options.print_max, _("\
Set limit on string chars or array elements to print."), _("\
Show limit on string chars or array elements to print."), _("\
\"set print elements 0\" causes there to be no limit."),
show_print_max,
&setprintlist, &showprintlist);
- add_setshow_boolean_cmd ("null-stop", no_class, &stop_print_at_null, _("\
+ add_setshow_boolean_cmd ("null-stop", no_class,
+ &user_print_options.stop_print_at_null, _("\
Set printing of char arrays to stop at first null char."), _("\
Show printing of char arrays to stop at first null char."), NULL,
NULL,
&setprintlist, &showprintlist);
add_setshow_uinteger_cmd ("repeats", no_class,
- &repeat_count_threshold, _("\
+ &user_print_options.repeat_count_threshold, _("\
Set threshold for repeated print elements."), _("\
Show threshold for repeated print elements."), _("\
\"set print repeats 0\" causes all elements to be individually printed."),
show_repeat_count_threshold,
&setprintlist, &showprintlist);
- add_setshow_boolean_cmd ("pretty", class_support, &prettyprint_structs, _("\
+ add_setshow_boolean_cmd ("pretty", class_support,
+ &user_print_options.prettyprint_structs, _("\
Set prettyprinting of structures."), _("\
Show prettyprinting of structures."), NULL,
NULL,
show_prettyprint_structs,
&setprintlist, &showprintlist);
- add_setshow_boolean_cmd ("union", class_support, &unionprint, _("\
+ add_setshow_boolean_cmd ("union", class_support,
+ &user_print_options.unionprint, _("\
Set printing of unions interior to structures."), _("\
Show printing of unions interior to structures."), NULL,
NULL,
show_unionprint,
&setprintlist, &showprintlist);
- add_setshow_boolean_cmd ("array", class_support, &prettyprint_arrays, _("\
+ add_setshow_boolean_cmd ("array", class_support,
+ &user_print_options.prettyprint_arrays, _("\
Set prettyprinting of arrays."), _("\
Show prettyprinting of arrays."), NULL,
NULL,
show_prettyprint_arrays,
&setprintlist, &showprintlist);
- add_setshow_boolean_cmd ("address", class_support, &addressprint, _("\
+ add_setshow_boolean_cmd ("address", class_support,
+ &user_print_options.addressprint, _("\
Set printing of addresses."), _("\
Show printing of addresses."), NULL,
NULL,
show_addressprint,
&setprintlist, &showprintlist);
- add_setshow_uinteger_cmd ("input-radix", class_support, &input_radix, _("\
+ add_setshow_zuinteger_cmd ("input-radix", class_support, &input_radix_1,
+ _("\
Set default input radix for entering numbers."), _("\
Show default input radix for entering numbers."), NULL,
- set_input_radix,
- show_input_radix,
- &setlist, &showlist);
+ set_input_radix,
+ show_input_radix,
+ &setlist, &showlist);
- add_setshow_uinteger_cmd ("output-radix", class_support, &output_radix, _("\
+ add_setshow_zuinteger_cmd ("output-radix", class_support, &output_radix_1,
+ _("\
Set default output radix for printing of values."), _("\
Show default output radix for printing of values."), NULL,
- set_output_radix,
- show_output_radix,
- &setlist, &showlist);
+ set_output_radix,
+ show_output_radix,
+ &setlist, &showlist);
/* The "set radix" and "show radix" commands are special in that
they are like normal set and show commands but allow two normally
&showlist);
add_setshow_boolean_cmd ("array-indexes", class_support,
- &print_array_indexes, _("\
+ &user_print_options.print_array_indexes, _("\
Set printing of array indexes."), _("\
Show printing of array indexes"), NULL, NULL, show_print_array_indexes,
&setprintlist, &showprintlist);
-
- /* Give people the defaults which they are used to. */
- prettyprint_structs = 0;
- prettyprint_arrays = 0;
- unionprint = 1;
- addressprint = 1;
- print_max = PRINT_MAX_DEFAULT;
}