@ifinfo
This file documents the @sc{gnu} linker LD version @value{VERSION}.
-Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc.
+Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
@samp{--oformat=srec} are equivalent. Unique abbreviations of the names
of multiple-letter options are accepted.
+Note - if the linker is being invoked indirectly, via a compiler driver
+(eg @samp{gcc}) then all the linker command line options should be
+prefixed by @samp{-Wl,} (or whatever is appropriate for the particular
+compiler driver) like this:
+
+@smallexample
+ gcc -Wl,--startgroup foo.o bar.o -Wl,--endgroup
+@end smallexample
+
+This is important, because otherwise the compiler driver program may
+silently drop the linker options, resulting in a bad link.
+
+Here is a table of the generic command line switches accepted by the GNU
+linker:
+
@table @code
@kindex -a@var{keyword}
@item -a@var{keyword}
environment variable. The @sc{gnu} linker will ignore the @code{-F}
option when not creating an ELF shared object.
+@cindex finalization function
+@kindex -fini
+@item -fini @var{name}
+When creating an ELF executable or shared object, call NAME when the
+executable or shared object is unloaded, by setting DT_FINI to the
+address of the function. By default, the linker uses @code{_fini} as
+the function to call.
+
@kindex -g
@item -g
Ignored. Provided for compatibility with other tools.
@item -i
Perform an incremental link (same as option @samp{-r}).
+@cindex initialization function
+@kindex -init
+@item -init @var{name}
+When creating an ELF executable or shared object, call NAME when the
+executable or shared object is loaded, by setting DT_INIT to the address
+of the function. By default, the linker uses @code{_init} as the
+function to call.
+
@cindex archive files, from cmd line
@kindex -l@var{archive}
@kindex --library=@var{archive}
@kindex --nmagic
@item -n
@itemx --nmagic
-Set the text segment to be read only, and mark the output as
-@code{NMAGIC} if possible.
+Turn off page alignment of sections, and mark the output as
+@code{NMAGIC} if possible.
@kindex -N
@kindex --omagic
the output. This might take significantly longer and therefore probably
should only be enabled for the final binary.
+@kindex -q
+@kindex --emit-relocs
+@cindex retain relocations in final executable
+@item -q
+@itemx --emit-relocs
+Leave relocation sections and contents in fully linked exececutables.
+Post link analysis and optimization tools may need this information in
+order to perform correct modifications of executables. This results
+in larger executables.
+
@cindex partial link
@cindex relocatable output
@kindex -r
trouble). The @samp{--traditional-format} switch tells @code{ld} to not
combine duplicate entries.
+@kindex --section-start @var{sectionname}=@var{org}
+@item --section-start @var{sectionname}=@var{org}
+Locate a section in the output file at the absolute
+address given by @var{org}. You may use this option as many
+times as necessary to locate multiple sections in the command
+line.
+@var{org} must be a single hexadecimal integer;
+for compatibility with other linkers, you may omit the leading
+@samp{0x} usually associated with hexadecimal values. @emph{Note:} there
+should be no white space between @var{sectionname}, the equals
+sign (``@key{=}''), and @var{org}.
+
@kindex -Tbss @var{org}
@kindex -Tdata @var{org}
@kindex -Ttext @var{org}
exported.
@kindex --exclude-symbols
-@item --exclude-symbols @var{symbol,symbol,...}
+@item --exclude-symbols @var{symbol},@var{symbol},...
Specifies a list of symbols which should not be automatically
exported. The symbol names may be delimited by commas or colons.
followed by a series of symbol assignments and output section
descriptions enclosed in curly braces.
-The first line in the above example sets the special symbol @samp{.},
-which is the location counter. If you do not specify the address of an
-output section in some other way (other ways are described later), the
-address is set from the current value of the location counter. The
-location counter is then incremented by the size of the output section.
-
The first line inside the @samp{SECTIONS} command of the above example
sets the value of the special symbol @samp{.}, which is the location
counter. If you do not specify the address of an output section in some
@var{output-section-command}
@var{output-section-command}
@dots{}
- @} [>@var{region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
+ @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
@end group
@end smallexample
*(.text)
@end smallexample
@noindent
-Here the @samp{*} is a wildcard which matches any file name. To exclude a file
-from matching the file name wildcard, EXCLUDE_FILE may be used to match all files
-except the one specified by EXCLUDE_FILE. For example:
+Here the @samp{*} is a wildcard which matches any file name. To exclude a list
+of files from matching the file name wildcard, EXCLUDE_FILE may be used to
+match all files except the ones specified in the EXCLUDE_FILE list. For
+example:
@smallexample
-(*(EXCLUDE_FILE (*crtend.o) .ctors))
+(*(EXCLUDE_FILE (*crtend.o *otherfile.o) .ctors))
@end smallexample
-will cause all .ctors sections from all files except crtend.o to be included.
+will cause all .ctors sections from all files except @file{crtend.o} and
+@file{otherfile.o} to be included.
There are two ways to include more than one section:
@smallexample
true of, for example, S-records, the value will be stored in the
endianness of the first input object file.
+Note - these commands only work inside a section description and not
+between them, so the following will produce an error from the linker:
+@smallexample
+SECTIONS @{@ .text : @{@ *(.text) @}@ LONG(1) .data : @{@ *(.data) @}@ @}@
+@end smallexample
+whereas this will work:
+@smallexample
+SECTIONS @{@ .text : @{@ *(.text) ; LONG(1) @}@ .data : @{@ *(.data) @}@ @}@
+@end smallexample
+
@kindex FILL(@var{expression})
@cindex holes, filling
@cindex unspecified memory
@var{output-section-command}
@var{output-section-command}
@dots{}
- @} [>@var{region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
+ @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
@end group
@end smallexample
We've already described @var{section}, @var{address}, and
@node Output Section LMA
@subsubsection Output section LMA
+@kindex AT>@var{lma_region}
@kindex AT(@var{lma})
@cindex load address
@cindex section load address
The linker will normally set the LMA equal to the VMA. You can change
that by using the @code{AT} keyword. The expression @var{lma} that
-follows the @code{AT} keyword specifies the load address of the section.
+follows the @code{AT} keyword specifies the load address of the
+section. Alternatively, with @samp{AT>@var{lma_region}} expression,
+you may specify a memory region for the section's load address. @xref{MEMORY}.
@cindex ROM initialized data
@cindex initialized data in ROM
@samp{.text} section from @file{file3}. The notation @samp{= 0x1234}
specifies what data to write in the gaps (@pxref{Output Section Fill}).
+@cindex dot inside sections
+Note: @code{.} actually refers to the byte offset from the start of the
+current containing object. Normally this is the @code{SECTIONS}
+statement, whoes start address is 0, hence @code{.} can be used as an
+absolute address. If @code{.} is used inside a section description
+however, it refers to the byte offset from the start of that section,
+not an absolute address. Thus in a script like this:
+
+@smallexample
+SECTIONS
+@{
+ . = 0x100
+ .text: @{
+ *(.text)
+ . = 0x200
+ @}
+ . = 0x500
+ .data: @{
+ *(.data)
+ . += 0x600
+ @}
+@}
+@end smallexample
+
+The @samp{.text} section will be assigned a starting address of 0x100
+and a size of exactly 0x200 bytes, even if there is not enough data in
+the @samp{.text} input sections to fill this area. (If there is too
+much data, an error will be produced because this would be an attempt to
+move @code{.} backwards). The @samp{.data} section will start at 0x500
+and it will have an extra 0x600 bytes worth of space after the end of
+the values from the @samp{.data} input sections and before the end of
+the @samp{.data} output section itself.
+
@need 2000
@node Operators
@subsection Operators
@section @code{ld}'s support for interworking between ARM and Thumb code
@cindex ARM interworking support
-@cindex --support-old-code
+@kindex --support-old-code
For the ARM, @code{ld} will generate code stubs to allow functions calls
betweem ARM and Thumb code. These stubs only work with code that has
been compiled and assembled with the @samp{-mthumb-interwork} command
the linker does not support generating stubs for function calls to
non-interworking aware Thumb code.
+@cindex thumb entry point
+@cindex entry point, thumb
+@kindex --thumb-entry=@var{entry}
+The @samp{--thumb-entry} switch is a duplicate of the generic
+@samp{--entry} switch, in that it sets the program's starting address.
+But it also sets the bottom bit of the address, so that it can be
+branched to using a BX instruction, and the program will start
+executing in Thumb mode straight away.
+
@ifclear GENERIC
@lowersections
@end ifclear