@end ifset
version @value{VERSION}.
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000,
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free
+Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@kindex --nmagic
@item -n
@itemx --nmagic
-Turn off page alignment of sections, and mark the output as
-@code{NMAGIC} if possible.
+Turn off page alignment of sections, and disable linking against shared
+libraries. If the output format supports Unix style magic numbers,
+mark the output as @code{NMAGIC}.
@kindex -N
@kindex --omagic
@item --as-needed
@itemx --no-as-needed
This option affects ELF DT_NEEDED tags for dynamic libraries mentioned
-on the command line after the @option{--as-needed} option. Normally,
+on the command line after the @option{--as-needed} option. Normally
the linker will add a DT_NEEDED tag for each dynamic library mentioned
on the command line, regardless of whether the library is actually
-needed. @option{--as-needed} causes a DT_NEEDED tag to only be emitted
-for a library that satisfies a symbol reference from regular objects
-which is undefined at the point that the library was linked, or, if
-the library is not found in the DT_NEEDED lists of other libraries
-linked up to that point, a reference from another dynamic library.
+needed or not. @option{--as-needed} causes a DT_NEEDED tag to only be
+emitted for a library that satisfies an undefined symbol reference
+from a regular object file or, if the library is not found in the
+DT_NEEDED lists of other libraries linked up to that point, an
+undefined symbol reference from another dynamic library.
@option{--no-as-needed} restores the default behaviour.
@kindex --add-needed
@kindex --no-add-needed
@item --add-needed
@itemx --no-add-needed
-This option affects the treatment of dynamic libraries from ELF
-DT_NEEDED tags in dynamic libraries mentioned on the command line after
-the @option{--no-add-needed} option. Normally, the linker will add
-a DT_NEEDED tag for each dynamic library from DT_NEEDED tags.
-@option{--no-add-needed} causes DT_NEEDED tags will never be emitted
-for those libraries from DT_NEEDED tags. @option{--add-needed} restores
-the default behaviour.
+These two options have been deprecated because of the similarity of
+their names to the @option{--as-needed} and @option{--no-as-needed}
+options. They have been replaced by @option{--copy-dt-needed-entries}
+and @option{--no-copy-dt-needed-entries}.
@kindex -assert @var{keyword}
@item -assert @var{keyword}
force checking in that case by using the @option{--check-sections}
option.
+@kindex --copy-dt-needed-entries
+@kindex --no-copy-dt-needed-entries
+@item --copy-dt-needed-entries
+@itemx --no-copy-dt-needed-entries
+This option affects the treatment of dynamic libraries referred to
+by DT_NEEDED tags @emph{inside} ELF dynamic libraries mentioned on the
+command line. Normally the linker will add a DT_NEEDED tag to the
+output binary for each library mentioned in a DT_NEEDED tag in an
+input dynamic library. With @option{--no-copy-dt-needed-entries}
+specified on the command line however any dynamic libraries that
+follow it will have their DT_NEEDED entries ignored. The default
+behaviour can be restored with @option{--copy-dt-needed-entries}.
+
+This option also has an effect on the resolution of symbols in dynamic
+libraries. With the default setting dynamic libraries mentioned on
+the command line will be recursively searched, following their
+DT_NEEDED tags to other libraries, in order to resolve symbols
+required by the output binary. With
+@option{--no-copy-dt-needed-entries} specified however the searching
+of dynamic libraries that follow it will stop with the dynamic
+library itself. No DT_NEEDED links will be traversed to resolve
+symbols.
+
@cindex cross reference table
@kindex --cref
@item --cref
relocations. See @samp{--entry} and @samp{--undefined}.
This option can be set when doing a partial link (enabled with option
-@samp{-r}). In this case the root of symbols kept must be explicitely
+@samp{-r}). In this case the root of symbols kept must be explicitly
specified either by an @samp{--entry} or @samp{--undefined} option or by
a @code{ENTRY} command in the linker script.
@kindex --relax
@cindex synthesizing linker
@cindex relaxing addressing modes
+@cindex --no-relax
@item --relax
+@itemx --no-relax
An option with machine dependent effects.
@ifset GENERIC
This option is only supported on a few targets.
@xref{PowerPC ELF32,,@command{ld} and PowerPC 32-bit ELF Support}.
@end ifset
-On some platforms, the @samp{--relax} option performs global
-optimizations that become possible when the linker resolves addressing
-in the program, such as relaxing address modes and synthesizing new
-instructions in the output object file.
+On some platforms the @samp{--relax} option performs target specific,
+global optimizations that become possible when the linker resolves
+addressing in the program, such as relaxing address modes,
+synthesizing new instructions, selecting shorter version of current
+instructions, and combinig constant values.
On some platforms these link time global optimizations may make symbolic
debugging of the resulting executable impossible.
@ifset GENERIC
-This is known to be
-the case for the Matsushita MN10200 and MN10300 family of processors.
+This is known to be the case for the Matsushita MN10200 and MN10300
+family of processors.
@end ifset
@ifset GENERIC
but ignored.
@end ifset
+On platforms where @samp{--relax} is accepted the option
+@samp{--no-relax} can be used to disable the feature.
+
@cindex retaining specified symbols
@cindex stripping all but some symbols
@cindex symbols, retaining selectively
mismatches are considered to be errors.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --leading-underscore
+@kindex --no-leading-underscore
+@item --leading-underscore
+@itemx --no-leading-underscore
+For most targets default symbol-prefix is an underscore and is defined
+in target's description. By this option it is possible to
+disable/enable the default underscore symbol-prefix.
+
@cindex DLLs, creating
@kindex --export-all-symbols
@item --export-all-symbols
@item
the @code{ENTRY(@var{symbol})} command in a linker script;
@item
-the value of the symbol @code{start}, if defined;
+the value of a target specific symbol, if it is defined; For many
+targets this is @code{start}, but PE and BeOS based systems for example
+check a list of possible entry symbols, matching the first one found.
@item
the address of the first byte of the @samp{.text} section, if present;
@item
bar1; bar2;
extern "C++" @{
ns::*;
- "int f(int, double)";
- @}
+ "f(int, double)";
+ @};
@} VERS_1.2;
@end smallexample
The supported @samp{lang}s are @samp{C}, @samp{C++}, and @samp{Java}.
The linker will iterate over the list of symbols at the link time and
demangle them according to @samp{lang} before matching them to the
-patterns specified in @samp{version-script-commands}.
+patterns specified in @samp{version-script-commands}. The default
+@samp{lang} is @samp{C}.
Demangled names may contains spaces and other special characters. As
described above, you can use a glob pattern to match demangled names,
The erratum only affects Thumb-2 code. Please contact ARM for further details.
+@kindex --merge-exidx-entries
+@kindex --no-merge-exidx-entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
+
@ifclear GENERIC
@lowersections
@end ifclear
_bar = bar
another_foo = abc.dll.afoo
var1 DATA
+doo = foo == foo2
+eoo DATA == var1
@end example
-This example defines a DLL with a non-default base address and five
+This example defines a DLL with a non-default base address and seven
symbols in the export table. The third exported symbol @code{_bar} is an
alias for the second. The fourth symbol, @code{another_foo} is resolved
by "forwarding" to another module and treating it as an alias for
@code{afoo} exported from the DLL @samp{abc.dll}. The final symbol
-@code{var1} is declared to be a data object.
+@code{var1} is declared to be a data object. The @samp{doo} symbol in
+export library is an alias of @samp{foo}, which gets the string name
+in export table @samp{foo2}. The @samp{eoo} symbol is an data export
+symbol, which gets in export table the name @samp{var1}.
The optional @code{LIBRARY <name>} command indicates the @emph{internal}
name of the output DLL. If @samp{<name>} does not include a suffix,
EXPORTS
( ( ( <name1> [ = <name2> ] )
| ( <name1> = <module-name> . <external-name>))
- [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] ) *
+ [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] [== <name3>] ) *
@end example
Declares @samp{<name1>} as an exported symbol from the DLL, or declares
@samp{<name1>} as a "forward" alias for the symbol
@samp{<external-name>} in the DLL @samp{<module-name>}.
Optionally, the symbol may be exported by the specified ordinal
-@samp{<integer>} alias.
+@samp{<integer>} alias. The optional @samp{<name3>} is the to be used
+string in import/export table for the symbol.
The optional keywords that follow the declaration indicate:
@cindex Xtensa options
@table @option
-@kindex --no-relax
-@item --no-relax
-Since the Xtensa version of @code{ld} enables the @option{--relax} option
-by default, the @option{--no-relax} option is provided to disable
-relaxation.
-
@item --size-opt
When optimizing indirect calls to direct calls, optimize for code size
more than performance. With this option, the linker will not insert