-/* Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+/* Copyright (C) 2002-2014 Free Software Foundation, Inc.
Contributed by Andy Vaught
Namelist transfer functions contributed by Paul Thomas
+ F2003 I/O support contributed by Jerry DeLisle
-This file is part of the GNU Fortran 95 runtime library (libgfortran).
+This file is part of the GNU Fortran runtime library (libgfortran).
Libgfortran is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file. (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
Libgfortran is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with Libgfortran; see the file COPYING. If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA. */
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+<http://www.gnu.org/licenses/>. */
/* transfer.c -- Top level handling of data transfer statements. */
#include "io.h"
+#include "fbuf.h"
+#include "format.h"
+#include "unix.h"
#include <string.h>
#include <assert.h>
+#include <stdlib.h>
+#include <errno.h>
/* Calling conventions: Data transfer statements are unlike other
For other sorts of data transfer, there are zero or more data
transfer statement that depend on the format of the data transfer
- statement.
+ statement. For READ (and for backwards compatibily: for WRITE), one has
transfer_integer
transfer_logical
transfer_character
+ transfer_character_wide
transfer_real
transfer_complex
+ transfer_real128
+ transfer_complex128
+
+ and for WRITE
+
+ transfer_integer_write
+ transfer_logical_write
+ transfer_character_write
+ transfer_character_wide_write
+ transfer_real_write
+ transfer_complex_write
+ transfer_real128_write
+ transfer_complex128_write
- These subroutines do not return status.
+ These subroutines do not return status. The *128 functions
+ are in the file transfer128.c.
The last call is a call to st_[read|write]_done(). While
something can easily go wrong with the initial st_read() or
extern void transfer_integer (st_parameter_dt *, void *, int);
export_proto(transfer_integer);
+extern void transfer_integer_write (st_parameter_dt *, void *, int);
+export_proto(transfer_integer_write);
+
extern void transfer_real (st_parameter_dt *, void *, int);
export_proto(transfer_real);
+extern void transfer_real_write (st_parameter_dt *, void *, int);
+export_proto(transfer_real_write);
+
extern void transfer_logical (st_parameter_dt *, void *, int);
export_proto(transfer_logical);
+extern void transfer_logical_write (st_parameter_dt *, void *, int);
+export_proto(transfer_logical_write);
+
extern void transfer_character (st_parameter_dt *, void *, int);
export_proto(transfer_character);
+extern void transfer_character_write (st_parameter_dt *, void *, int);
+export_proto(transfer_character_write);
+
+extern void transfer_character_wide (st_parameter_dt *, void *, int, int);
+export_proto(transfer_character_wide);
+
+extern void transfer_character_wide_write (st_parameter_dt *,
+ void *, int, int);
+export_proto(transfer_character_wide_write);
+
extern void transfer_complex (st_parameter_dt *, void *, int);
export_proto(transfer_complex);
+extern void transfer_complex_write (st_parameter_dt *, void *, int);
+export_proto(transfer_complex_write);
+
extern void transfer_array (st_parameter_dt *, gfc_array_char *, int,
gfc_charlen_type);
export_proto(transfer_array);
+extern void transfer_array_write (st_parameter_dt *, gfc_array_char *, int,
+ gfc_charlen_type);
+export_proto(transfer_array_write);
+
static void us_read (st_parameter_dt *, int);
static void us_write (st_parameter_dt *, int);
static void next_record_r_unf (st_parameter_dt *, int);
};
+static const st_option decimal_opt[] = {
+ {"point", DECIMAL_POINT},
+ {"comma", DECIMAL_COMMA},
+ {NULL, 0}
+};
+
+static const st_option round_opt[] = {
+ {"up", ROUND_UP},
+ {"down", ROUND_DOWN},
+ {"zero", ROUND_ZERO},
+ {"nearest", ROUND_NEAREST},
+ {"compatible", ROUND_COMPATIBLE},
+ {"processor_defined", ROUND_PROCDEFINED},
+ {NULL, 0}
+};
+
+
+static const st_option sign_opt[] = {
+ {"plus", SIGN_SP},
+ {"suppress", SIGN_SS},
+ {"processor_defined", SIGN_S},
+ {NULL, 0}
+};
+
+static const st_option blank_opt[] = {
+ {"null", BLANK_NULL},
+ {"zero", BLANK_ZERO},
+ {NULL, 0}
+};
+
+static const st_option delim_opt[] = {
+ {"apostrophe", DELIM_APOSTROPHE},
+ {"quote", DELIM_QUOTE},
+ {"none", DELIM_NONE},
+ {NULL, 0}
+};
+
+static const st_option pad_opt[] = {
+ {"yes", PAD_YES},
+ {"no", PAD_NO},
+ {NULL, 0}
+};
+
typedef enum
{ FORMATTED_SEQUENTIAL, UNFORMATTED_SEQUENTIAL,
FORMATTED_DIRECT, UNFORMATTED_DIRECT, FORMATTED_STREAM, UNFORMATTED_STREAM
}
-/* Mid level data transfer statements. These subroutines do reading
- and writing in the style of salloc_r()/salloc_w() within the
- current record. */
+/* Mid level data transfer statements. */
+
+/* Read sequential file - internal unit */
+
+static char *
+read_sf_internal (st_parameter_dt *dtp, int * length)
+{
+ static char *empty_string[0];
+ char *base;
+ int lorig;
+
+ /* Zero size array gives internal unit len of 0. Nothing to read. */
+ if (dtp->internal_unit_len == 0
+ && dtp->u.p.current_unit->pad_status == PAD_NO)
+ hit_eof (dtp);
+
+ /* If we have seen an eor previously, return a length of 0. The
+ caller is responsible for correctly padding the input field. */
+ if (dtp->u.p.sf_seen_eor)
+ {
+ *length = 0;
+ /* Just return something that isn't a NULL pointer, otherwise the
+ caller thinks an error occurred. */
+ return (char*) empty_string;
+ }
+
+ lorig = *length;
+ if (is_char4_unit(dtp))
+ {
+ int i;
+ gfc_char4_t *p = (gfc_char4_t *) mem_alloc_r4 (dtp->u.p.current_unit->s,
+ length);
+ base = fbuf_alloc (dtp->u.p.current_unit, lorig);
+ for (i = 0; i < *length; i++, p++)
+ base[i] = *p > 255 ? '?' : (unsigned char) *p;
+ }
+ else
+ base = mem_alloc_r (dtp->u.p.current_unit->s, length);
+
+ if (unlikely (lorig > *length))
+ {
+ hit_eof (dtp);
+ return NULL;
+ }
+
+ dtp->u.p.current_unit->bytes_left -= *length;
+
+ if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
+ dtp->u.p.size_used += (GFC_IO_INT) *length;
+
+ return base;
+
+}
/* When reading sequential formatted records we have a problem. We
don't know how long the line is until we read the trailing newline,
For larger allocations, we are forced to allocate memory on the
heap. Hopefully this won't happen very often. */
-char *
-read_sf (st_parameter_dt *dtp, int *length, int no_error)
-{
- char *base, *p, *q;
- int n, readlen, crlf;
- gfc_offset pos;
+/* Read sequential file - external unit */
- if (*length > SCRATCH_SIZE)
- dtp->u.p.line_buffer = get_mem (*length);
- p = base = dtp->u.p.line_buffer;
+static char *
+read_sf (st_parameter_dt *dtp, int * length)
+{
+ static char *empty_string[0];
+ int q, q2;
+ int n, lorig, seen_comma;
/* If we have seen an eor previously, return a length of 0. The
caller is responsible for correctly padding the input field. */
if (dtp->u.p.sf_seen_eor)
{
*length = 0;
- return base;
+ /* Just return something that isn't a NULL pointer, otherwise the
+ caller thinks an error occurred. */
+ return (char*) empty_string;
}
- if (is_internal_unit (dtp))
- {
- readlen = *length;
- q = salloc_r (dtp->u.p.current_unit->s, &readlen);
- memcpy (p, q, readlen);
- goto done;
- }
+ n = seen_comma = 0;
- readlen = 1;
- n = 0;
+ /* Read data into format buffer and scan through it. */
+ lorig = *length;
- do
+ while (n < *length)
{
- q = salloc_r (dtp->u.p.current_unit->s, &readlen);
- if (q == NULL)
+ q = fbuf_getc (dtp->u.p.current_unit);
+ if (q == EOF)
break;
-
- /* If we have a line without a terminating \n, drop through to
- EOR below. */
- if (readlen < 1 && n == 0)
- {
- if (no_error)
- break;
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return NULL;
- }
-
- if (readlen < 1 || *q == '\n' || *q == '\r')
+ else if (q == '\n' || q == '\r')
{
- /* Unexpected end of line. */
+ /* Unexpected end of line. Set the position. */
+ dtp->u.p.sf_seen_eor = 1;
/* If we see an EOR during non-advancing I/O, we need to skip
the rest of the I/O statement. Set the corresponding flag. */
if (dtp->u.p.advance_status == ADVANCE_NO || dtp->u.p.seen_dollar)
dtp->u.p.eor_condition = 1;
-
- crlf = 0;
+
/* If we encounter a CR, it might be a CRLF. */
- if (*q == '\r') /* Probably a CRLF */
+ if (q == '\r') /* Probably a CRLF */
{
- readlen = 1;
- pos = stream_offset (dtp->u.p.current_unit->s);
- q = salloc_r (dtp->u.p.current_unit->s, &readlen);
- if (*q != '\n' && readlen == 1) /* Not a CRLF after all. */
- sseek (dtp->u.p.current_unit->s, pos);
- else
- crlf = 1;
+ /* See if there is an LF. */
+ q2 = fbuf_getc (dtp->u.p.current_unit);
+ if (q2 == '\n')
+ dtp->u.p.sf_seen_eor = 2;
+ else if (q2 != EOF) /* Oops, seek back. */
+ fbuf_seek (dtp->u.p.current_unit, -1, SEEK_CUR);
}
/* Without padding, terminate the I/O statement without assigning
the value. With padding, the value still needs to be assigned,
so we can just continue with a short read. */
- if (dtp->u.p.current_unit->flags.pad == PAD_NO)
+ if (dtp->u.p.current_unit->pad_status == PAD_NO)
{
- if (no_error)
- break;
generate_error (&dtp->common, LIBERROR_EOR, NULL);
return NULL;
}
*length = n;
- dtp->u.p.sf_seen_eor = (crlf ? 2 : 1);
- break;
+ goto done;
}
/* Short circuit the read if a comma is found during numeric input.
The flag is set to zero during character reads so that commas in
strings are not ignored */
- if (*q == ',')
+ else if (q == ',')
if (dtp->u.p.sf_read_comma == 1)
{
+ seen_comma = 1;
notify_std (&dtp->common, GFC_STD_GNU,
"Comma in formatted numeric read.");
- *length = n;
break;
}
-
n++;
- *p++ = *q;
- dtp->u.p.sf_seen_eor = 0;
}
- while (n < *length);
+
+ *length = n;
+
+ /* A short read implies we hit EOF, unless we hit EOR, a comma, or
+ some other stuff. Set the relevant flags. */
+ if (lorig > *length && !dtp->u.p.sf_seen_eor && !seen_comma)
+ {
+ if (n > 0)
+ {
+ if (dtp->u.p.advance_status == ADVANCE_NO)
+ {
+ if (dtp->u.p.current_unit->pad_status == PAD_NO)
+ {
+ hit_eof (dtp);
+ return NULL;
+ }
+ else
+ dtp->u.p.eor_condition = 1;
+ }
+ else
+ dtp->u.p.at_eof = 1;
+ }
+ else if (dtp->u.p.advance_status == ADVANCE_NO
+ || dtp->u.p.current_unit->pad_status == PAD_NO
+ || dtp->u.p.current_unit->bytes_left
+ == dtp->u.p.current_unit->recl)
+ {
+ hit_eof (dtp);
+ return NULL;
+ }
+ }
done:
- dtp->u.p.current_unit->bytes_left -= *length;
- if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
- dtp->u.p.size_used += (gfc_offset) *length;
+ dtp->u.p.current_unit->bytes_left -= n;
- return base;
+ if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
+ dtp->u.p.size_used += (GFC_IO_INT) n;
+
+ /* We can't call fbuf_getptr before the loop doing fbuf_getc, because
+ fbuf_getc might reallocate the buffer. So return current pointer
+ minus all the advances, which is n plus up to two characters
+ of newline or comma. */
+ return fbuf_getptr (dtp->u.p.current_unit)
+ - n - dtp->u.p.sf_seen_eor - seen_comma;
}
/* Function for reading the next couple of bytes from the current
- file, advancing the current position. We return a pointer to a
- buffer containing the bytes. We return NULL on end of record or
- end of file.
+ file, advancing the current position. We return NULL on end of record or
+ end of file. This function is only for formatted I/O, unformatted uses
+ read_block_direct.
If the read is short, then it is because the current record does not
have enough data to satisfy the read request and the file was
short reads. */
void *
-read_block (st_parameter_dt *dtp, int *length)
+read_block_form (st_parameter_dt *dtp, int * nbytes)
{
char *source;
- int nread;
+ int norig;
- if (is_stream_io (dtp))
- {
- if (sseek (dtp->u.p.current_unit->s,
- dtp->u.p.current_unit->strm_pos - 1) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return NULL;
- }
- }
- else
+ if (!is_stream_io (dtp))
{
- if (dtp->u.p.current_unit->bytes_left < (gfc_offset) *length)
+ if (dtp->u.p.current_unit->bytes_left < (gfc_offset) *nbytes)
{
/* For preconnected units with default record length, set bytes left
to unit record length and proceed, otherwise error. */
if (dtp->u.p.current_unit->unit_number == options.stdin_unit
&& dtp->u.p.current_unit->recl == DEFAULT_RECL)
- dtp->u.p.current_unit->bytes_left = dtp->u.p.current_unit->recl;
+ dtp->u.p.current_unit->bytes_left = dtp->u.p.current_unit->recl;
else
{
- if (dtp->u.p.current_unit->flags.pad == PAD_NO)
+ if (unlikely (dtp->u.p.current_unit->pad_status == PAD_NO)
+ && !is_internal_unit (dtp))
{
/* Not enough data left. */
generate_error (&dtp->common, LIBERROR_EOR, NULL);
}
}
- if (dtp->u.p.current_unit->bytes_left == 0)
+ if (unlikely (dtp->u.p.current_unit->bytes_left == 0
+ && !is_internal_unit(dtp)))
{
- dtp->u.p.current_unit->endfile = AT_ENDFILE;
- generate_error (&dtp->common, LIBERROR_END, NULL);
+ hit_eof (dtp);
return NULL;
}
- *length = dtp->u.p.current_unit->bytes_left;
+ *nbytes = dtp->u.p.current_unit->bytes_left;
}
}
(dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL ||
dtp->u.p.current_unit->flags.access == ACCESS_STREAM))
{
- source = read_sf (dtp, length, 0);
+ if (is_internal_unit (dtp))
+ source = read_sf_internal (dtp, nbytes);
+ else
+ source = read_sf (dtp, nbytes);
+
dtp->u.p.current_unit->strm_pos +=
- (gfc_offset) (*length + dtp->u.p.sf_seen_eor);
+ (gfc_offset) (*nbytes + dtp->u.p.sf_seen_eor);
return source;
}
- dtp->u.p.current_unit->bytes_left -= (gfc_offset) *length;
- nread = *length;
- source = salloc_r (dtp->u.p.current_unit->s, &nread);
+ /* If we reach here, we can assume it's direct access. */
+
+ dtp->u.p.current_unit->bytes_left -= (gfc_offset) *nbytes;
+
+ norig = *nbytes;
+ source = fbuf_read (dtp->u.p.current_unit, nbytes);
+ fbuf_seek (dtp->u.p.current_unit, *nbytes, SEEK_CUR);
if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
- dtp->u.p.size_used += (gfc_offset) nread;
+ dtp->u.p.size_used += (GFC_IO_INT) *nbytes;
- if (nread != *length)
- { /* Short read, this shouldn't happen. */
- if (dtp->u.p.current_unit->flags.pad == PAD_YES)
- *length = nread;
- else
+ if (norig != *nbytes)
+ {
+ /* Short read, this shouldn't happen. */
+ if (!dtp->u.p.current_unit->pad_status == PAD_YES)
{
generate_error (&dtp->common, LIBERROR_EOR, NULL);
source = NULL;
}
}
- dtp->u.p.current_unit->strm_pos += (gfc_offset) nread;
+ dtp->u.p.current_unit->strm_pos += (gfc_offset) *nbytes;
+
+ return source;
+}
+
+
+/* Read a block from a character(kind=4) internal unit, to be transferred into
+ a character(kind=4) variable. Note: Portions of this code borrowed from
+ read_sf_internal. */
+void *
+read_block_form4 (st_parameter_dt *dtp, int * nbytes)
+{
+ static gfc_char4_t *empty_string[0];
+ gfc_char4_t *source;
+ int lorig;
+
+ if (dtp->u.p.current_unit->bytes_left < (gfc_offset) *nbytes)
+ *nbytes = dtp->u.p.current_unit->bytes_left;
+
+ /* Zero size array gives internal unit len of 0. Nothing to read. */
+ if (dtp->internal_unit_len == 0
+ && dtp->u.p.current_unit->pad_status == PAD_NO)
+ hit_eof (dtp);
+
+ /* If we have seen an eor previously, return a length of 0. The
+ caller is responsible for correctly padding the input field. */
+ if (dtp->u.p.sf_seen_eor)
+ {
+ *nbytes = 0;
+ /* Just return something that isn't a NULL pointer, otherwise the
+ caller thinks an error occurred. */
+ return empty_string;
+ }
+
+ lorig = *nbytes;
+ source = (gfc_char4_t *) mem_alloc_r4 (dtp->u.p.current_unit->s, nbytes);
+
+ if (unlikely (lorig > *nbytes))
+ {
+ hit_eof (dtp);
+ return NULL;
+ }
+
+ dtp->u.p.current_unit->bytes_left -= *nbytes;
+
+ if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
+ dtp->u.p.size_used += (GFC_IO_INT) *nbytes;
return source;
}
unformatted files. */
static void
-read_block_direct (st_parameter_dt *dtp, void *buf, size_t *nbytes)
+read_block_direct (st_parameter_dt *dtp, void *buf, size_t nbytes)
{
- size_t to_read_record;
- size_t have_read_record;
- size_t to_read_subrecord;
- size_t have_read_subrecord;
+ ssize_t to_read_record;
+ ssize_t have_read_record;
+ ssize_t to_read_subrecord;
+ ssize_t have_read_subrecord;
int short_record;
if (is_stream_io (dtp))
{
- if (sseek (dtp->u.p.current_unit->s,
- dtp->u.p.current_unit->strm_pos - 1) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
- }
-
- to_read_record = *nbytes;
- have_read_record = to_read_record;
- if (sread (dtp->u.p.current_unit->s, buf, &have_read_record) != 0)
+ have_read_record = sread (dtp->u.p.current_unit->s, buf,
+ nbytes);
+ if (unlikely (have_read_record < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
return;
dtp->u.p.current_unit->strm_pos += (gfc_offset) have_read_record;
- if (to_read_record != have_read_record)
+ if (unlikely ((ssize_t) nbytes != have_read_record))
{
/* Short read, e.g. if we hit EOF. For stream files,
we have to set the end-of-file condition. */
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
+ hit_eof (dtp);
}
return;
}
if (dtp->u.p.current_unit->flags.access == ACCESS_DIRECT)
{
- if (dtp->u.p.current_unit->bytes_left < (gfc_offset) *nbytes)
+ if (dtp->u.p.current_unit->bytes_left < (gfc_offset) nbytes)
{
short_record = 1;
- to_read_record = (size_t) dtp->u.p.current_unit->bytes_left;
- *nbytes = to_read_record;
+ to_read_record = dtp->u.p.current_unit->bytes_left;
+ nbytes = to_read_record;
}
-
else
{
short_record = 0;
- to_read_record = *nbytes;
+ to_read_record = nbytes;
}
dtp->u.p.current_unit->bytes_left -= to_read_record;
- if (sread (dtp->u.p.current_unit->s, buf, &to_read_record) != 0)
+ to_read_record = sread (dtp->u.p.current_unit->s, buf, to_read_record);
+ if (unlikely (to_read_record < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
return;
}
- if (to_read_record != *nbytes)
+ if (to_read_record != (ssize_t) nbytes)
{
/* Short read, e.g. if we hit EOF. Apparently, we read
more than was written to the last record. */
- *nbytes = to_read_record;
return;
}
- if (short_record)
+ if (unlikely (short_record))
{
generate_error (&dtp->common, LIBERROR_SHORT_RECORD, NULL);
- return;
}
return;
}
until the request has been fulfilled or the record has run out
of continuation subrecords. */
- if (dtp->u.p.current_unit->endfile == AT_ENDFILE)
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
- }
-
/* Check whether we exceed the total record length. */
if (dtp->u.p.current_unit->flags.has_recl
- && (*nbytes > (size_t) dtp->u.p.current_unit->bytes_left))
+ && ((gfc_offset) nbytes > dtp->u.p.current_unit->bytes_left))
{
- to_read_record = (size_t) dtp->u.p.current_unit->bytes_left;
+ to_read_record = dtp->u.p.current_unit->bytes_left;
short_record = 1;
}
else
{
- to_read_record = *nbytes;
+ to_read_record = nbytes;
short_record = 0;
}
have_read_record = 0;
if (dtp->u.p.current_unit->bytes_left_subrecord
< (gfc_offset) to_read_record)
{
- to_read_subrecord = (size_t) dtp->u.p.current_unit->bytes_left_subrecord;
+ to_read_subrecord = dtp->u.p.current_unit->bytes_left_subrecord;
to_read_record -= to_read_subrecord;
}
else
dtp->u.p.current_unit->bytes_left_subrecord -= to_read_subrecord;
- have_read_subrecord = to_read_subrecord;
- if (sread (dtp->u.p.current_unit->s, buf + have_read_record,
- &have_read_subrecord) != 0)
+ have_read_subrecord = sread (dtp->u.p.current_unit->s,
+ buf + have_read_record, to_read_subrecord);
+ if (unlikely (have_read_subrecord < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
return;
have_read_record += have_read_subrecord;
- if (to_read_subrecord != have_read_subrecord)
-
+ if (unlikely (to_read_subrecord != have_read_subrecord))
{
/* Short read, e.g. if we hit EOF. This means the record
structure has been corrupted, or the trailing record
marker would still be present. */
- *nbytes = have_read_record;
generate_error (&dtp->common, LIBERROR_CORRUPT_FILE, NULL);
return;
}
if (to_read_record > 0)
{
- if (dtp->u.p.current_unit->continued)
+ if (likely (dtp->u.p.current_unit->continued))
{
next_record_r_unf (dtp, 0);
us_read (dtp, 1);
}
dtp->u.p.current_unit->bytes_left -= have_read_record;
- if (short_record)
+ if (unlikely (short_record))
{
generate_error (&dtp->common, LIBERROR_SHORT_RECORD, NULL);
return;
{
char *dest;
- if (is_stream_io (dtp))
- {
- if (sseek (dtp->u.p.current_unit->s,
- dtp->u.p.current_unit->strm_pos - 1) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- return NULL;
- }
- }
- else
+ if (!is_stream_io (dtp))
{
if (dtp->u.p.current_unit->bytes_left < (gfc_offset) length)
{
/* For preconnected units with default record length, set bytes left
to unit record length and proceed, otherwise error. */
- if ((dtp->u.p.current_unit->unit_number == options.stdout_unit
- || dtp->u.p.current_unit->unit_number == options.stderr_unit)
- && dtp->u.p.current_unit->recl == DEFAULT_RECL)
+ if (likely ((dtp->u.p.current_unit->unit_number
+ == options.stdout_unit
+ || dtp->u.p.current_unit->unit_number
+ == options.stderr_unit)
+ && dtp->u.p.current_unit->recl == DEFAULT_RECL))
dtp->u.p.current_unit->bytes_left = dtp->u.p.current_unit->recl;
else
{
dtp->u.p.current_unit->bytes_left -= (gfc_offset) length;
}
- dest = salloc_w (dtp->u.p.current_unit->s, &length);
-
- if (dest == NULL)
+ if (is_internal_unit (dtp))
{
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return NULL;
- }
+ if (dtp->common.unit) /* char4 internel unit. */
+ {
+ gfc_char4_t *dest4;
+ dest4 = mem_alloc_w4 (dtp->u.p.current_unit->s, &length);
+ if (dest4 == NULL)
+ {
+ generate_error (&dtp->common, LIBERROR_END, NULL);
+ return NULL;
+ }
+ return dest4;
+ }
+ else
+ dest = mem_alloc_w (dtp->u.p.current_unit->s, &length);
- if (is_internal_unit (dtp) && dtp->u.p.current_unit->endfile == AT_ENDFILE)
- generate_error (&dtp->common, LIBERROR_END, NULL);
+ if (dest == NULL)
+ {
+ generate_error (&dtp->common, LIBERROR_END, NULL);
+ return NULL;
+ }
+ if (unlikely (dtp->u.p.current_unit->endfile == AT_ENDFILE))
+ generate_error (&dtp->common, LIBERROR_END, NULL);
+ }
+ else
+ {
+ dest = fbuf_alloc (dtp->u.p.current_unit, length);
+ if (dest == NULL)
+ {
+ generate_error (&dtp->common, LIBERROR_OS, NULL);
+ return NULL;
+ }
+ }
+
if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
- dtp->u.p.size_used += (gfc_offset) length;
+ dtp->u.p.size_used += (GFC_IO_INT) length;
dtp->u.p.current_unit->strm_pos += (gfc_offset) length;
called for unformatted files. There are three cases to consider:
Stream I/O, unformatted direct, unformatted sequential. */
-static try
+static bool
write_buf (st_parameter_dt *dtp, void *buf, size_t nbytes)
{
- size_t have_written, to_write_subrecord;
+ ssize_t have_written;
+ ssize_t to_write_subrecord;
int short_record;
-
/* Stream I/O. */
if (is_stream_io (dtp))
{
- if (sseek (dtp->u.p.current_unit->s,
- dtp->u.p.current_unit->strm_pos - 1) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- return FAILURE;
- }
-
- if (swrite (dtp->u.p.current_unit->s, buf, &nbytes) != 0)
+ have_written = swrite (dtp->u.p.current_unit->s, buf, nbytes);
+ if (unlikely (have_written < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
- return FAILURE;
+ return false;
}
- dtp->u.p.current_unit->strm_pos += (gfc_offset) nbytes;
+ dtp->u.p.current_unit->strm_pos += (gfc_offset) have_written;
- return SUCCESS;
+ return true;
}
/* Unformatted direct access. */
if (dtp->u.p.current_unit->flags.access == ACCESS_DIRECT)
{
- if (dtp->u.p.current_unit->bytes_left < (gfc_offset) nbytes)
+ if (unlikely (dtp->u.p.current_unit->bytes_left < (gfc_offset) nbytes))
{
generate_error (&dtp->common, LIBERROR_DIRECT_EOR, NULL);
- return FAILURE;
+ return false;
}
- if (swrite (dtp->u.p.current_unit->s, buf, &nbytes) != 0)
+ if (buf == NULL && nbytes == 0)
+ return true;
+
+ have_written = swrite (dtp->u.p.current_unit->s, buf, nbytes);
+ if (unlikely (have_written < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
- return FAILURE;
+ return false;
}
- dtp->u.p.current_unit->strm_pos += (gfc_offset) nbytes;
- dtp->u.p.current_unit->bytes_left -= (gfc_offset) nbytes;
-
- return SUCCESS;
+ dtp->u.p.current_unit->strm_pos += (gfc_offset) have_written;
+ dtp->u.p.current_unit->bytes_left -= (gfc_offset) have_written;
+ return true;
}
/* Unformatted sequential. */
dtp->u.p.current_unit->bytes_left_subrecord -=
(gfc_offset) to_write_subrecord;
- if (swrite (dtp->u.p.current_unit->s, buf + have_written,
- &to_write_subrecord) != 0)
+ to_write_subrecord = swrite (dtp->u.p.current_unit->s,
+ buf + have_written, to_write_subrecord);
+ if (unlikely (to_write_subrecord < 0))
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
- return FAILURE;
+ return false;
}
dtp->u.p.current_unit->strm_pos += (gfc_offset) to_write_subrecord;
us_write (dtp, 1);
}
dtp->u.p.current_unit->bytes_left -= have_written;
- if (short_record)
+ if (unlikely (short_record))
{
generate_error (&dtp->common, LIBERROR_SHORT_RECORD, NULL);
- return FAILURE;
+ return false;
}
- return SUCCESS;
+ return true;
}
-/* Master function for unformatted reads. */
+/* Reverse memcpy - used for byte swapping. */
static void
-unformatted_read (st_parameter_dt *dtp, bt type,
- void *dest, int kind __attribute__((unused)),
- size_t size, size_t nelems)
+reverse_memcpy (void *dest, const void *src, size_t n)
+{
+ char *d, *s;
+ size_t i;
+
+ d = (char *) dest;
+ s = (char *) src + n - 1;
+
+ /* Write with ascending order - this is likely faster
+ on modern architectures because of write combining. */
+ for (i=0; i<n; i++)
+ *(d++) = *(s--);
+}
+
+
+/* Utility function for byteswapping an array, using the bswap
+ builtins if possible. dest and src can overlap completely, or then
+ they must point to separate objects; partial overlaps are not
+ allowed. */
+
+static void
+bswap_array (void *dest, const void *src, size_t size, size_t nelems)
{
- size_t i, sz;
+ const char *ps;
+ char *pd;
- /* Currently, character implies size=1. */
- if (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE
- || size == 1 || type == BT_CHARACTER)
- {
- sz = size * nelems;
- read_block_direct (dtp, dest, &sz);
- }
- else
+ switch (size)
{
- char buffer[16];
- char *p;
-
- /* Break up complex into its constituent reals. */
- if (type == BT_COMPLEX)
+ case 1:
+ break;
+ case 2:
+ for (size_t i = 0; i < nelems; i++)
+ ((uint16_t*)dest)[i] = __builtin_bswap16 (((uint16_t*)src)[i]);
+ break;
+ case 4:
+ for (size_t i = 0; i < nelems; i++)
+ ((uint32_t*)dest)[i] = __builtin_bswap32 (((uint32_t*)src)[i]);
+ break;
+ case 8:
+ for (size_t i = 0; i < nelems; i++)
+ ((uint64_t*)dest)[i] = __builtin_bswap64 (((uint64_t*)src)[i]);
+ break;
+ case 12:
+ ps = src;
+ pd = dest;
+ for (size_t i = 0; i < nelems; i++)
{
- nelems *= 2;
- size /= 2;
+ uint32_t tmp;
+ memcpy (&tmp, ps, 4);
+ *(uint32_t*)pd = __builtin_bswap32 (*(uint32_t*)(ps + 8));
+ *(uint32_t*)(pd + 4) = __builtin_bswap32 (*(uint32_t*)(ps + 4));
+ *(uint32_t*)(pd + 8) = __builtin_bswap32 (tmp);
+ ps += size;
+ pd += size;
}
- p = dest;
-
- /* By now, all complex variables have been split into their
- constituent reals. */
-
- for (i=0; i<nelems; i++)
+ break;
+ case 16:
+ ps = src;
+ pd = dest;
+ for (size_t i = 0; i < nelems; i++)
{
- read_block_direct (dtp, buffer, &size);
- reverse_memcpy (p, buffer, size);
- p += size;
- }
+ uint64_t tmp;
+ memcpy (&tmp, ps, 8);
+ *(uint64_t*)pd = __builtin_bswap64 (*(uint64_t*)(ps + 8));
+ *(uint64_t*)(pd + 8) = __builtin_bswap64 (tmp);
+ ps += size;
+ pd += size;
+ }
+ break;
+ default:
+ pd = dest;
+ if (dest != src)
+ {
+ ps = src;
+ for (size_t i = 0; i < nelems; i++)
+ {
+ reverse_memcpy (pd, ps, size);
+ ps += size;
+ pd += size;
+ }
+ }
+ else
+ {
+ /* In-place byte swap. */
+ for (size_t i = 0; i < nelems; i++)
+ {
+ char tmp, *low = pd, *high = pd + size - 1;
+ for (size_t j = 0; j < size/2; j++)
+ {
+ tmp = *low;
+ *low = *high;
+ *high = tmp;
+ low++;
+ high--;
+ }
+ pd += size;
+ }
+ }
+ }
+}
+
+
+/* Master function for unformatted reads. */
+
+static void
+unformatted_read (st_parameter_dt *dtp, bt type,
+ void *dest, int kind, size_t size, size_t nelems)
+{
+ if (type == BT_CHARACTER)
+ size *= GFC_SIZE_OF_CHAR_KIND(kind);
+ read_block_direct (dtp, dest, size * nelems);
+
+ if (unlikely (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_SWAP)
+ && kind != 1)
+ {
+ /* Handle wide chracters. */
+ if (type == BT_CHARACTER)
+ {
+ nelems *= size;
+ size = kind;
+ }
+
+ /* Break up complex into its constituent reals. */
+ else if (type == BT_COMPLEX)
+ {
+ nelems *= 2;
+ size /= 2;
+ }
+ bswap_array (dest, dest, size, nelems);
}
}
static void
unformatted_write (st_parameter_dt *dtp, bt type,
- void *source, int kind __attribute__((unused)),
- size_t size, size_t nelems)
+ void *source, int kind, size_t size, size_t nelems)
{
- if (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE ||
- size == 1 || type == BT_CHARACTER)
+ if (likely (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE)
+ || kind == 1)
{
- size *= nelems;
- write_buf (dtp, source, size);
+ size_t stride = type == BT_CHARACTER ?
+ size * GFC_SIZE_OF_CHAR_KIND(kind) : size;
+
+ write_buf (dtp, source, stride * nelems);
}
else
{
- char buffer[16];
+#define BSWAP_BUFSZ 512
+ char buffer[BSWAP_BUFSZ];
char *p;
- size_t i;
-
- /* Break up complex into its constituent reals. */
- if (type == BT_COMPLEX)
+ size_t nrem;
+
+ p = source;
+
+ /* Handle wide chracters. */
+ if (type == BT_CHARACTER && kind != 1)
+ {
+ nelems *= size;
+ size = kind;
+ }
+
+ /* Break up complex into its constituent reals. */
+ if (type == BT_COMPLEX)
{
nelems *= 2;
size /= 2;
}
- p = source;
-
/* By now, all complex variables have been split into their
constituent reals. */
-
- for (i=0; i<nelems; i++)
+ nrem = nelems;
+ do
{
- reverse_memcpy(buffer, p, size);
- p+= size;
- write_buf (dtp, buffer, size);
+ size_t nc;
+ if (size * nrem > BSWAP_BUFSZ)
+ nc = BSWAP_BUFSZ / size;
+ else
+ nc = nrem;
+
+ bswap_array (buffer, p, size, nc);
+ write_buf (dtp, buffer, size * nc);
+ p += size * nc;
+ nrem -= nc;
}
+ while (nrem > 0);
}
}
write_constant_string (st_parameter_dt *dtp, const fnode *f)
{
char c, delimiter, *p, *q;
- int length;
+ int length;
length = f->u.string.length;
if (length == 0)
p = write_block (dtp, length);
if (p == NULL)
return;
-
+
q = f->u.string.p;
delimiter = q[-1];
}
-/* Given actual and expected types in a formatted data transfer, make
- sure they agree. If not, an error message is generated. Returns
- nonzero if something went wrong. */
+/* Given actual and expected types in a formatted data transfer, make
+ sure they agree. If not, an error message is generated. Returns
+ nonzero if something went wrong. */
+
+static int
+require_type (st_parameter_dt *dtp, bt expected, bt actual, const fnode *f)
+{
+#define BUFLEN 100
+ char buffer[BUFLEN];
+
+ if (actual == expected)
+ return 0;
+
+ /* Adjust item_count before emitting error message. */
+ snprintf (buffer, BUFLEN,
+ "Expected %s for item %d in formatted transfer, got %s",
+ type_name (expected), dtp->u.p.item_count - 1, type_name (actual));
+
+ format_error (dtp, f, buffer);
+ return 1;
+}
+
+
+static int
+require_numeric_type (st_parameter_dt *dtp, bt actual, const fnode *f)
+{
+#define BUFLEN 100
+ char buffer[BUFLEN];
+
+ if (actual == BT_INTEGER || actual == BT_REAL || actual == BT_COMPLEX)
+ return 0;
+
+ /* Adjust item_count before emitting error message. */
+ snprintf (buffer, BUFLEN,
+ "Expected numeric type for item %d in formatted transfer, got %s",
+ dtp->u.p.item_count - 1, type_name (actual));
+
+ format_error (dtp, f, buffer);
+ return 1;
+}
+
+
+/* This function is in the main loop for a formatted data transfer
+ statement. It would be natural to implement this as a coroutine
+ with the user program, but C makes that awkward. We loop,
+ processing format elements. When we actually have to transfer
+ data instead of just setting flags, we return control to the user
+ program which calls a function that supplies the address and type
+ of the next element, then comes back here to process it. */
+
+static void
+formatted_transfer_scalar_read (st_parameter_dt *dtp, bt type, void *p, int kind,
+ size_t size)
+{
+ int pos, bytes_used;
+ const fnode *f;
+ format_token t;
+ int n;
+ int consume_data_flag;
+
+ /* Change a complex data item into a pair of reals. */
+
+ n = (p == NULL) ? 0 : ((type != BT_COMPLEX) ? 1 : 2);
+ if (type == BT_COMPLEX)
+ {
+ type = BT_REAL;
+ size /= 2;
+ }
+
+ /* If there's an EOR condition, we simulate finalizing the transfer
+ by doing nothing. */
+ if (dtp->u.p.eor_condition)
+ return;
+
+ /* Set this flag so that commas in reads cause the read to complete before
+ the entire field has been read. The next read field will start right after
+ the comma in the stream. (Set to 0 for character reads). */
+ dtp->u.p.sf_read_comma =
+ dtp->u.p.current_unit->decimal_status == DECIMAL_COMMA ? 0 : 1;
+
+ for (;;)
+ {
+ /* If reversion has occurred and there is another real data item,
+ then we have to move to the next record. */
+ if (dtp->u.p.reversion_flag && n > 0)
+ {
+ dtp->u.p.reversion_flag = 0;
+ next_record (dtp, 0);
+ }
+
+ consume_data_flag = 1;
+ if ((dtp->common.flags & IOPARM_LIBRETURN_MASK) != IOPARM_LIBRETURN_OK)
+ break;
+
+ f = next_format (dtp);
+ if (f == NULL)
+ {
+ /* No data descriptors left. */
+ if (unlikely (n > 0))
+ generate_error (&dtp->common, LIBERROR_FORMAT,
+ "Insufficient data descriptors in format after reversion");
+ return;
+ }
+
+ t = f->format;
+
+ bytes_used = (int)(dtp->u.p.current_unit->recl
+ - dtp->u.p.current_unit->bytes_left);
+
+ if (is_stream_io(dtp))
+ bytes_used = 0;
+
+ switch (t)
+ {
+ case FMT_I:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_INTEGER, type, f))
+ return;
+ read_decimal (dtp, f, p, kind);
+ break;
+
+ case FMT_B:
+ if (n == 0)
+ goto need_read_data;
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
+ && require_type (dtp, BT_INTEGER, type, f))
+ return;
+ read_radix (dtp, f, p, kind, 2);
+ break;
+
+ case FMT_O:
+ if (n == 0)
+ goto need_read_data;
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
+ && require_type (dtp, BT_INTEGER, type, f))
+ return;
+ read_radix (dtp, f, p, kind, 8);
+ break;
+
+ case FMT_Z:
+ if (n == 0)
+ goto need_read_data;
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
+ && require_type (dtp, BT_INTEGER, type, f))
+ return;
+ read_radix (dtp, f, p, kind, 16);
+ break;
+
+ case FMT_A:
+ if (n == 0)
+ goto need_read_data;
+
+ /* It is possible to have FMT_A with something not BT_CHARACTER such
+ as when writing out hollerith strings, so check both type
+ and kind before calling wide character routines. */
+ if (type == BT_CHARACTER && kind == 4)
+ read_a_char4 (dtp, f, p, size);
+ else
+ read_a (dtp, f, p, size);
+ break;
+
+ case FMT_L:
+ if (n == 0)
+ goto need_read_data;
+ read_l (dtp, f, p, kind);
+ break;
+
+ case FMT_D:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_REAL, type, f))
+ return;
+ read_f (dtp, f, p, kind);
+ break;
+
+ case FMT_E:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_REAL, type, f))
+ return;
+ read_f (dtp, f, p, kind);
+ break;
+
+ case FMT_EN:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_REAL, type, f))
+ return;
+ read_f (dtp, f, p, kind);
+ break;
+
+ case FMT_ES:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_REAL, type, f))
+ return;
+ read_f (dtp, f, p, kind);
+ break;
+
+ case FMT_F:
+ if (n == 0)
+ goto need_read_data;
+ if (require_type (dtp, BT_REAL, type, f))
+ return;
+ read_f (dtp, f, p, kind);
+ break;
+
+ case FMT_G:
+ if (n == 0)
+ goto need_read_data;
+ switch (type)
+ {
+ case BT_INTEGER:
+ read_decimal (dtp, f, p, kind);
+ break;
+ case BT_LOGICAL:
+ read_l (dtp, f, p, kind);
+ break;
+ case BT_CHARACTER:
+ if (kind == 4)
+ read_a_char4 (dtp, f, p, size);
+ else
+ read_a (dtp, f, p, size);
+ break;
+ case BT_REAL:
+ read_f (dtp, f, p, kind);
+ break;
+ default:
+ internal_error (&dtp->common, "formatted_transfer(): Bad type");
+ }
+ break;
+
+ case FMT_STRING:
+ consume_data_flag = 0;
+ format_error (dtp, f, "Constant string in input format");
+ return;
+
+ /* Format codes that don't transfer data. */
+ case FMT_X:
+ case FMT_TR:
+ consume_data_flag = 0;
+ dtp->u.p.skips += f->u.n;
+ pos = bytes_used + dtp->u.p.skips - 1;
+ dtp->u.p.pending_spaces = pos - dtp->u.p.max_pos + 1;
+ read_x (dtp, f->u.n);
+ break;
+
+ case FMT_TL:
+ case FMT_T:
+ consume_data_flag = 0;
+
+ if (f->format == FMT_TL)
+ {
+ /* Handle the special case when no bytes have been used yet.
+ Cannot go below zero. */
+ if (bytes_used == 0)
+ {
+ dtp->u.p.pending_spaces -= f->u.n;
+ dtp->u.p.skips -= f->u.n;
+ dtp->u.p.skips = dtp->u.p.skips < 0 ? 0 : dtp->u.p.skips;
+ }
+
+ pos = bytes_used - f->u.n;
+ }
+ else /* FMT_T */
+ pos = f->u.n - 1;
+
+ /* Standard 10.6.1.1: excessive left tabbing is reset to the
+ left tab limit. We do not check if the position has gone
+ beyond the end of record because a subsequent tab could
+ bring us back again. */
+ pos = pos < 0 ? 0 : pos;
+
+ dtp->u.p.skips = dtp->u.p.skips + pos - bytes_used;
+ dtp->u.p.pending_spaces = dtp->u.p.pending_spaces
+ + pos - dtp->u.p.max_pos;
+ dtp->u.p.pending_spaces = dtp->u.p.pending_spaces < 0
+ ? 0 : dtp->u.p.pending_spaces;
+ if (dtp->u.p.skips == 0)
+ break;
+
+ /* Adjust everything for end-of-record condition */
+ if (dtp->u.p.sf_seen_eor && !is_internal_unit (dtp))
+ {
+ dtp->u.p.current_unit->bytes_left -= dtp->u.p.sf_seen_eor;
+ dtp->u.p.skips -= dtp->u.p.sf_seen_eor;
+ bytes_used = pos;
+ dtp->u.p.sf_seen_eor = 0;
+ }
+ if (dtp->u.p.skips < 0)
+ {
+ if (is_internal_unit (dtp))
+ sseek (dtp->u.p.current_unit->s, dtp->u.p.skips, SEEK_CUR);
+ else
+ fbuf_seek (dtp->u.p.current_unit, dtp->u.p.skips, SEEK_CUR);
+ dtp->u.p.current_unit->bytes_left -= (gfc_offset) dtp->u.p.skips;
+ dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
+ }
+ else
+ read_x (dtp, dtp->u.p.skips);
+ break;
+
+ case FMT_S:
+ consume_data_flag = 0;
+ dtp->u.p.sign_status = SIGN_S;
+ break;
+
+ case FMT_SS:
+ consume_data_flag = 0;
+ dtp->u.p.sign_status = SIGN_SS;
+ break;
+
+ case FMT_SP:
+ consume_data_flag = 0;
+ dtp->u.p.sign_status = SIGN_SP;
+ break;
+
+ case FMT_BN:
+ consume_data_flag = 0 ;
+ dtp->u.p.blank_status = BLANK_NULL;
+ break;
+
+ case FMT_BZ:
+ consume_data_flag = 0;
+ dtp->u.p.blank_status = BLANK_ZERO;
+ break;
+
+ case FMT_DC:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->decimal_status = DECIMAL_COMMA;
+ break;
+
+ case FMT_DP:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->decimal_status = DECIMAL_POINT;
+ break;
+
+ case FMT_RC:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_COMPATIBLE;
+ break;
+
+ case FMT_RD:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_DOWN;
+ break;
+
+ case FMT_RN:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_NEAREST;
+ break;
+
+ case FMT_RP:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_PROCDEFINED;
+ break;
+
+ case FMT_RU:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_UP;
+ break;
+
+ case FMT_RZ:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_ZERO;
+ break;
+
+ case FMT_P:
+ consume_data_flag = 0;
+ dtp->u.p.scale_factor = f->u.k;
+ break;
+
+ case FMT_DOLLAR:
+ consume_data_flag = 0;
+ dtp->u.p.seen_dollar = 1;
+ break;
+
+ case FMT_SLASH:
+ consume_data_flag = 0;
+ dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
+ next_record (dtp, 0);
+ break;
+
+ case FMT_COLON:
+ /* A colon descriptor causes us to exit this loop (in
+ particular preventing another / descriptor from being
+ processed) unless there is another data item to be
+ transferred. */
+ consume_data_flag = 0;
+ if (n == 0)
+ return;
+ break;
+
+ default:
+ internal_error (&dtp->common, "Bad format node");
+ }
+
+ /* Adjust the item count and data pointer. */
+
+ if ((consume_data_flag > 0) && (n > 0))
+ {
+ n--;
+ p = ((char *) p) + size;
+ }
-static int
-require_type (st_parameter_dt *dtp, bt expected, bt actual, const fnode *f)
-{
- char buffer[100];
+ dtp->u.p.skips = 0;
- if (actual == expected)
- return 0;
+ pos = (int)(dtp->u.p.current_unit->recl - dtp->u.p.current_unit->bytes_left);
+ dtp->u.p.max_pos = (dtp->u.p.max_pos > pos) ? dtp->u.p.max_pos : pos;
+ }
- sprintf (buffer, "Expected %s for item %d in formatted transfer, got %s",
- type_name (expected), dtp->u.p.item_count, type_name (actual));
+ return;
- format_error (dtp, f, buffer);
- return 1;
+ /* Come here when we need a data descriptor but don't have one. We
+ push the current format node back onto the input, then return and
+ let the user program call us back with the data. */
+ need_read_data:
+ unget_format (dtp, f);
}
-/* This subroutine is the main loop for a formatted data transfer
- statement. It would be natural to implement this as a coroutine
- with the user program, but C makes that awkward. We loop,
- processing format elements. When we actually have to transfer
- data instead of just setting flags, we return control to the user
- program which calls a subroutine that supplies the address and type
- of the next element, then comes back here to process it. */
-
static void
-formatted_transfer_scalar (st_parameter_dt *dtp, bt type, void *p, int len,
- size_t size)
+formatted_transfer_scalar_write (st_parameter_dt *dtp, bt type, void *p, int kind,
+ size_t size)
{
- char scratch[SCRATCH_SIZE];
int pos, bytes_used;
const fnode *f;
format_token t;
/* Set this flag so that commas in reads cause the read to complete before
the entire field has been read. The next read field will start right after
the comma in the stream. (Set to 0 for character reads). */
- dtp->u.p.sf_read_comma = 1;
+ dtp->u.p.sf_read_comma =
+ dtp->u.p.current_unit->decimal_status == DECIMAL_COMMA ? 0 : 1;
- dtp->u.p.line_buffer = scratch;
for (;;)
{
/* If reversion has occurred and there is another real data item,
next_record (dtp, 0);
}
- consume_data_flag = 1 ;
+ consume_data_flag = 1;
if ((dtp->common.flags & IOPARM_LIBRETURN_MASK) != IOPARM_LIBRETURN_OK)
break;
if (f == NULL)
{
/* No data descriptors left. */
- if (n > 0)
+ if (unlikely (n > 0))
generate_error (&dtp->common, LIBERROR_FORMAT,
"Insufficient data descriptors in format after reversion");
return;
{
if (dtp->u.p.skips > 0)
{
+ int tmp;
write_x (dtp, dtp->u.p.skips, dtp->u.p.pending_spaces);
- dtp->u.p.max_pos = (int)(dtp->u.p.current_unit->recl
- - dtp->u.p.current_unit->bytes_left);
+ tmp = (int)(dtp->u.p.current_unit->recl
+ - dtp->u.p.current_unit->bytes_left);
+ dtp->u.p.max_pos =
+ dtp->u.p.max_pos > tmp ? dtp->u.p.max_pos : tmp;
}
if (dtp->u.p.skips < 0)
{
- move_pos_offset (dtp->u.p.current_unit->s, dtp->u.p.skips);
+ if (is_internal_unit (dtp))
+ sseek (dtp->u.p.current_unit->s, dtp->u.p.skips, SEEK_CUR);
+ else
+ fbuf_seek (dtp->u.p.current_unit, dtp->u.p.skips, SEEK_CUR);
dtp->u.p.current_unit->bytes_left -= (gfc_offset) dtp->u.p.skips;
}
dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
goto need_data;
if (require_type (dtp, BT_INTEGER, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_decimal (dtp, f, p, len);
- else
- write_i (dtp, f, p, len);
-
+ write_i (dtp, f, p, kind);
break;
case FMT_B:
if (n == 0)
goto need_data;
-
- if (compile_options.allow_std < GFC_STD_GNU
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
&& require_type (dtp, BT_INTEGER, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_radix (dtp, f, p, len, 2);
- else
- write_b (dtp, f, p, len);
-
+ write_b (dtp, f, p, kind);
break;
case FMT_O:
if (n == 0)
goto need_data;
-
- if (compile_options.allow_std < GFC_STD_GNU
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
&& require_type (dtp, BT_INTEGER, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_radix (dtp, f, p, len, 8);
- else
- write_o (dtp, f, p, len);
-
+ write_o (dtp, f, p, kind);
break;
case FMT_Z:
if (n == 0)
goto need_data;
-
- if (compile_options.allow_std < GFC_STD_GNU
+ if (!(compile_options.allow_std & GFC_STD_GNU)
+ && require_numeric_type (dtp, type, f))
+ return;
+ if (!(compile_options.allow_std & GFC_STD_F2008)
&& require_type (dtp, BT_INTEGER, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_radix (dtp, f, p, len, 16);
- else
- write_z (dtp, f, p, len);
-
+ write_z (dtp, f, p, kind);
break;
case FMT_A:
if (n == 0)
goto need_data;
- if (dtp->u.p.mode == READING)
- read_a (dtp, f, p, len);
+ /* It is possible to have FMT_A with something not BT_CHARACTER such
+ as when writing out hollerith strings, so check both type
+ and kind before calling wide character routines. */
+ if (type == BT_CHARACTER && kind == 4)
+ write_a_char4 (dtp, f, p, size);
else
- write_a (dtp, f, p, len);
-
+ write_a (dtp, f, p, size);
break;
case FMT_L:
if (n == 0)
goto need_data;
-
- if (dtp->u.p.mode == READING)
- read_l (dtp, f, p, len);
- else
- write_l (dtp, f, p, len);
-
+ write_l (dtp, f, p, kind);
break;
case FMT_D:
goto need_data;
if (require_type (dtp, BT_REAL, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_f (dtp, f, p, len);
- else
- write_d (dtp, f, p, len);
-
+ write_d (dtp, f, p, kind);
break;
case FMT_E:
goto need_data;
if (require_type (dtp, BT_REAL, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_f (dtp, f, p, len);
- else
- write_e (dtp, f, p, len);
+ write_e (dtp, f, p, kind);
break;
case FMT_EN:
goto need_data;
if (require_type (dtp, BT_REAL, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_f (dtp, f, p, len);
- else
- write_en (dtp, f, p, len);
-
+ write_en (dtp, f, p, kind);
break;
case FMT_ES:
goto need_data;
if (require_type (dtp, BT_REAL, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_f (dtp, f, p, len);
- else
- write_es (dtp, f, p, len);
-
+ write_es (dtp, f, p, kind);
break;
case FMT_F:
goto need_data;
if (require_type (dtp, BT_REAL, type, f))
return;
-
- if (dtp->u.p.mode == READING)
- read_f (dtp, f, p, len);
- else
- write_f (dtp, f, p, len);
-
+ write_f (dtp, f, p, kind);
break;
case FMT_G:
if (n == 0)
goto need_data;
- if (dtp->u.p.mode == READING)
- switch (type)
- {
- case BT_INTEGER:
- read_decimal (dtp, f, p, len);
- break;
- case BT_LOGICAL:
- read_l (dtp, f, p, len);
- break;
- case BT_CHARACTER:
- read_a (dtp, f, p, len);
- break;
- case BT_REAL:
- read_f (dtp, f, p, len);
- break;
- default:
- goto bad_type;
- }
- else
- switch (type)
- {
+ switch (type)
+ {
case BT_INTEGER:
- write_i (dtp, f, p, len);
+ write_i (dtp, f, p, kind);
break;
case BT_LOGICAL:
- write_l (dtp, f, p, len);
+ write_l (dtp, f, p, kind);
break;
case BT_CHARACTER:
- write_a (dtp, f, p, len);
+ if (kind == 4)
+ write_a_char4 (dtp, f, p, size);
+ else
+ write_a (dtp, f, p, size);
break;
case BT_REAL:
- write_d (dtp, f, p, len);
+ if (f->u.real.w == 0)
+ write_real_g0 (dtp, p, kind, f->u.real.d);
+ else
+ write_d (dtp, f, p, kind);
break;
default:
- bad_type:
internal_error (&dtp->common,
"formatted_transfer(): Bad type");
- }
-
+ }
break;
case FMT_STRING:
- consume_data_flag = 0 ;
- if (dtp->u.p.mode == READING)
- {
- format_error (dtp, f, "Constant string in input format");
- return;
- }
+ consume_data_flag = 0;
write_constant_string (dtp, f);
break;
dtp->u.p.skips += f->u.n;
pos = bytes_used + dtp->u.p.skips - 1;
dtp->u.p.pending_spaces = pos - dtp->u.p.max_pos + 1;
-
/* Writes occur just before the switch on f->format, above, so
that trailing blanks are suppressed, unless we are doing a
non-advancing write in which case we want to output the blanks
now. */
- if (dtp->u.p.mode == WRITING
- && dtp->u.p.advance_status == ADVANCE_NO)
+ if (dtp->u.p.advance_status == ADVANCE_NO)
{
write_x (dtp, dtp->u.p.skips, dtp->u.p.pending_spaces);
dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
}
-
- if (dtp->u.p.mode == READING)
- read_x (dtp, f->u.n);
-
break;
case FMT_TL:
pos = bytes_used - f->u.n;
}
else /* FMT_T */
- {
- if (dtp->u.p.mode == READING)
- pos = f->u.n - 1;
- else
- pos = f->u.n - dtp->u.p.pending_spaces - 1;
- }
+ pos = f->u.n - dtp->u.p.pending_spaces - 1;
/* Standard 10.6.1.1: excessive left tabbing is reset to the
left tab limit. We do not check if the position has gone
+ pos - dtp->u.p.max_pos;
dtp->u.p.pending_spaces = dtp->u.p.pending_spaces < 0
? 0 : dtp->u.p.pending_spaces;
-
- if (dtp->u.p.skips == 0)
- break;
-
- /* Writes occur just before the switch on f->format, above, so that
- trailing blanks are suppressed. */
- if (dtp->u.p.mode == READING)
- {
- /* Adjust everything for end-of-record condition */
- if (dtp->u.p.sf_seen_eor && !is_internal_unit (dtp))
- {
- if (dtp->u.p.sf_seen_eor == 2)
- {
- /* The EOR was a CRLF (two bytes wide). */
- dtp->u.p.current_unit->bytes_left -= 2;
- dtp->u.p.skips -= 2;
- }
- else
- {
- /* The EOR marker was only one byte wide. */
- dtp->u.p.current_unit->bytes_left--;
- dtp->u.p.skips--;
- }
- bytes_used = pos;
- dtp->u.p.sf_seen_eor = 0;
- }
- if (dtp->u.p.skips < 0)
- {
- move_pos_offset (dtp->u.p.current_unit->s, dtp->u.p.skips);
- dtp->u.p.current_unit->bytes_left
- -= (gfc_offset) dtp->u.p.skips;
- dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
- }
- else
- read_x (dtp, dtp->u.p.skips);
- }
-
break;
case FMT_S:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.sign_status = SIGN_S;
break;
case FMT_SS:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.sign_status = SIGN_SS;
break;
case FMT_SP:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.sign_status = SIGN_SP;
break;
break;
case FMT_BZ:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.blank_status = BLANK_ZERO;
break;
+ case FMT_DC:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->decimal_status = DECIMAL_COMMA;
+ break;
+
+ case FMT_DP:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->decimal_status = DECIMAL_POINT;
+ break;
+
+ case FMT_RC:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_COMPATIBLE;
+ break;
+
+ case FMT_RD:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_DOWN;
+ break;
+
+ case FMT_RN:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_NEAREST;
+ break;
+
+ case FMT_RP:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_PROCDEFINED;
+ break;
+
+ case FMT_RU:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_UP;
+ break;
+
+ case FMT_RZ:
+ consume_data_flag = 0;
+ dtp->u.p.current_unit->round_status = ROUND_ZERO;
+ break;
+
case FMT_P:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.scale_factor = f->u.k;
break;
case FMT_DOLLAR:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.seen_dollar = 1;
break;
case FMT_SLASH:
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
dtp->u.p.skips = dtp->u.p.pending_spaces = 0;
next_record (dtp, 0);
break;
particular preventing another / descriptor from being
processed) unless there is another data item to be
transferred. */
- consume_data_flag = 0 ;
+ consume_data_flag = 0;
if (n == 0)
return;
break;
internal_error (&dtp->common, "Bad format node");
}
- /* Free a buffer that we had to allocate during a sequential
- formatted read of a block that was larger than the static
- buffer. */
-
- if (dtp->u.p.line_buffer != scratch)
- {
- free_mem (dtp->u.p.line_buffer);
- dtp->u.p.line_buffer = scratch;
- }
-
/* Adjust the item count and data pointer. */
if ((consume_data_flag > 0) && (n > 0))
- {
- n--;
- p = ((char *) p) + size;
- }
-
- if (dtp->u.p.mode == READING)
- dtp->u.p.skips = 0;
+ {
+ n--;
+ p = ((char *) p) + size;
+ }
pos = (int)(dtp->u.p.current_unit->recl - dtp->u.p.current_unit->bytes_left);
dtp->u.p.max_pos = (dtp->u.p.max_pos > pos) ? dtp->u.p.max_pos : pos;
-
}
return;
unget_format (dtp, f);
}
+ /* This function is first called from data_init_transfer to initiate the loop
+ over each item in the format, transferring data as required. Subsequent
+ calls to this function occur for each data item foound in the READ/WRITE
+ statement. The item_count is incremented for each call. Since the first
+ call is from data_transfer_init, the item_count is always one greater than
+ the actual count number of the item being transferred. */
+
static void
formatted_transfer (st_parameter_dt *dtp, bt type, void *p, int kind,
size_t size, size_t nelems)
char *tmp;
tmp = (char *) p;
-
- /* Big loop over all the elements. */
- for (elem = 0; elem < nelems; elem++)
+ size_t stride = type == BT_CHARACTER ?
+ size * GFC_SIZE_OF_CHAR_KIND(kind) : size;
+ if (dtp->u.p.mode == READING)
+ {
+ /* Big loop over all the elements. */
+ for (elem = 0; elem < nelems; elem++)
+ {
+ dtp->u.p.item_count++;
+ formatted_transfer_scalar_read (dtp, type, tmp + stride*elem, kind, size);
+ }
+ }
+ else
{
- dtp->u.p.item_count++;
- formatted_transfer_scalar (dtp, type, tmp + size*elem, kind, size);
+ /* Big loop over all the elements. */
+ for (elem = 0; elem < nelems; elem++)
+ {
+ dtp->u.p.item_count++;
+ formatted_transfer_scalar_write (dtp, type, tmp + stride*elem, kind, size);
+ }
}
}
-
/* Data transfer entry points. The type of the data entity is
implicit in the subroutine call. This prevents us from having to
share a common enum with the compiler. */
dtp->u.p.transfer (dtp, BT_INTEGER, p, kind, kind, 1);
}
+void
+transfer_integer_write (st_parameter_dt *dtp, void *p, int kind)
+{
+ transfer_integer (dtp, p, kind);
+}
void
transfer_real (st_parameter_dt *dtp, void *p, int kind)
dtp->u.p.transfer (dtp, BT_REAL, p, kind, size, 1);
}
+void
+transfer_real_write (st_parameter_dt *dtp, void *p, int kind)
+{
+ transfer_real (dtp, p, kind);
+}
void
transfer_logical (st_parameter_dt *dtp, void *p, int kind)
dtp->u.p.transfer (dtp, BT_LOGICAL, p, kind, kind, 1);
}
+void
+transfer_logical_write (st_parameter_dt *dtp, void *p, int kind)
+{
+ transfer_logical (dtp, p, kind);
+}
void
transfer_character (st_parameter_dt *dtp, void *p, int len)
if (len == 0 && p == NULL)
p = empty_string;
- /* Currently we support only 1 byte chars, and the library is a bit
- confused of character kind vs. length, so we kludge it by setting
- kind = length. */
- dtp->u.p.transfer (dtp, BT_CHARACTER, p, len, len, 1);
+ /* Set kind here to 1. */
+ dtp->u.p.transfer (dtp, BT_CHARACTER, p, 1, len, 1);
+}
+
+void
+transfer_character_write (st_parameter_dt *dtp, void *p, int len)
+{
+ transfer_character (dtp, p, len);
+}
+
+void
+transfer_character_wide (st_parameter_dt *dtp, void *p, int len, int kind)
+{
+ static char *empty_string[0];
+
+ if ((dtp->common.flags & IOPARM_LIBRETURN_MASK) != IOPARM_LIBRETURN_OK)
+ return;
+
+ /* Strings of zero length can have p == NULL, which confuses the
+ transfer routines into thinking we need more data elements. To avoid
+ this, we give them a nice pointer. */
+ if (len == 0 && p == NULL)
+ p = empty_string;
+
+ /* Here we pass the actual kind value. */
+ dtp->u.p.transfer (dtp, BT_CHARACTER, p, kind, len, 1);
}
+void
+transfer_character_wide_write (st_parameter_dt *dtp, void *p, int len, int kind)
+{
+ transfer_character_wide (dtp, p, len, kind);
+}
void
transfer_complex (st_parameter_dt *dtp, void *p, int kind)
dtp->u.p.transfer (dtp, BT_COMPLEX, p, kind, size, 1);
}
+void
+transfer_complex_write (st_parameter_dt *dtp, void *p, int kind)
+{
+ transfer_complex (dtp, p, kind);
+}
void
transfer_array (st_parameter_dt *dtp, gfc_array_char *desc, int kind,
index_type count[GFC_MAX_DIMENSIONS];
index_type extent[GFC_MAX_DIMENSIONS];
index_type stride[GFC_MAX_DIMENSIONS];
- index_type stride0, rank, size, type, n;
+ index_type stride0, rank, size, n;
size_t tsize;
char *data;
bt iotype;
if ((dtp->common.flags & IOPARM_LIBRETURN_MASK) != IOPARM_LIBRETURN_OK)
return;
- type = GFC_DESCRIPTOR_TYPE (desc);
- size = GFC_DESCRIPTOR_SIZE (desc);
-
- /* FIXME: What a kludge: Array descriptors and the IO library use
- different enums for types. */
- switch (type)
- {
- case GFC_DTYPE_UNKNOWN:
- iotype = BT_NULL; /* Is this correct? */
- break;
- case GFC_DTYPE_INTEGER:
- iotype = BT_INTEGER;
- break;
- case GFC_DTYPE_LOGICAL:
- iotype = BT_LOGICAL;
- break;
- case GFC_DTYPE_REAL:
- iotype = BT_REAL;
- break;
- case GFC_DTYPE_COMPLEX:
- iotype = BT_COMPLEX;
- break;
- case GFC_DTYPE_CHARACTER:
- iotype = BT_CHARACTER;
- /* FIXME: Currently dtype contains the charlen, which is
- clobbered if charlen > 2**24. That's why we use a separate
- argument for the charlen. However, if we want to support
- non-8-bit charsets we need to fix dtype to contain
- sizeof(chartype) and fix the code below. */
- size = charlen;
- kind = charlen;
- break;
- case GFC_DTYPE_DERIVED:
- internal_error (&dtp->common,
- "Derived type I/O should have been handled via the frontend.");
- break;
- default:
- internal_error (&dtp->common, "transfer_array(): Bad type");
- }
+ iotype = (bt) GFC_DESCRIPTOR_TYPE (desc);
+ size = iotype == BT_CHARACTER ? charlen : GFC_DESCRIPTOR_SIZE (desc);
rank = GFC_DESCRIPTOR_RANK (desc);
for (n = 0; n < rank; n++)
{
count[n] = 0;
- stride[n] = desc->dim[n].stride;
- extent[n] = desc->dim[n].ubound + 1 - desc->dim[n].lbound;
+ stride[n] = GFC_DESCRIPTOR_STRIDE_BYTES(desc,n);
+ extent[n] = GFC_DESCRIPTOR_EXTENT(desc,n);
/* If the extent of even one dimension is zero, then the entire
- array section contains zero elements, so we return. */
+ array section contains zero elements, so we return after writing
+ a zero array record. */
if (extent[n] <= 0)
- return;
+ {
+ data = NULL;
+ tsize = 0;
+ dtp->u.p.transfer (dtp, iotype, data, kind, size, tsize);
+ return;
+ }
}
stride0 = stride[0];
- /* If the innermost dimension has stride 1, we can do the transfer
+ /* If the innermost dimension has a stride of 1, we can do the transfer
in contiguous chunks. */
- if (stride0 == 1)
+ if (stride0 == size)
tsize = extent[0];
else
tsize = 1;
while (data)
{
dtp->u.p.transfer (dtp, iotype, data, kind, size, tsize);
- data += stride0 * size * tsize;
+ data += stride0 * tsize;
count[0] += tsize;
n = 0;
while (count[n] == extent[n])
{
count[n] = 0;
- data -= stride[n] * extent[n] * size;
+ data -= stride[n] * extent[n];
n++;
if (n == rank)
{
else
{
count[n]++;
- data += stride[n] * size;
+ data += stride[n];
}
}
}
}
+void
+transfer_array_write (st_parameter_dt *dtp, gfc_array_char *desc, int kind,
+ gfc_charlen_type charlen)
+{
+ transfer_array (dtp, desc, kind, charlen);
+}
/* Preposition a sequential unformatted file while reading. */
static void
us_read (st_parameter_dt *dtp, int continued)
{
- char *p;
- int n;
- int nr;
+ ssize_t n, nr;
GFC_INTEGER_4 i4;
GFC_INTEGER_8 i8;
gfc_offset i;
- if (dtp->u.p.current_unit->endfile == AT_ENDFILE)
- return;
-
if (compile_options.record_marker == 0)
n = sizeof (GFC_INTEGER_4);
else
n = compile_options.record_marker;
- nr = n;
-
- p = salloc_r (dtp->u.p.current_unit->s, &n);
-
- if (n == 0)
+ nr = sread (dtp->u.p.current_unit->s, &i, n);
+ if (unlikely (nr < 0))
{
- dtp->u.p.current_unit->endfile = AT_ENDFILE;
+ generate_error (&dtp->common, LIBERROR_BAD_US, NULL);
+ return;
+ }
+ else if (nr == 0)
+ {
+ hit_eof (dtp);
return; /* end of file */
}
-
- if (p == NULL || n != nr)
+ else if (unlikely (n != nr))
{
generate_error (&dtp->common, LIBERROR_BAD_US, NULL);
return;
}
/* Only GFC_CONVERT_NATIVE and GFC_CONVERT_SWAP are valid here. */
- if (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE)
+ if (likely (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE))
{
switch (nr)
{
case sizeof(GFC_INTEGER_4):
- memcpy (&i4, p, sizeof (i4));
+ memcpy (&i4, &i, sizeof (i4));
i = i4;
break;
case sizeof(GFC_INTEGER_8):
- memcpy (&i8, p, sizeof (i8));
+ memcpy (&i8, &i, sizeof (i8));
i = i8;
break;
}
}
else
+ {
+ uint32_t u32;
+ uint64_t u64;
switch (nr)
{
case sizeof(GFC_INTEGER_4):
- reverse_memcpy (&i4, p, sizeof (i4));
+ memcpy (&u32, &i, sizeof (u32));
+ u32 = __builtin_bswap32 (u32);
+ memcpy (&i4, &u32, sizeof (i4));
i = i4;
break;
case sizeof(GFC_INTEGER_8):
- reverse_memcpy (&i8, p, sizeof (i8));
+ memcpy (&u64, &i, sizeof (u64));
+ u64 = __builtin_bswap64 (u64);
+ memcpy (&i8, &u64, sizeof (i8));
i = i8;
break;
runtime_error ("Illegal value for record marker");
break;
}
+ }
if (i >= 0)
{
static void
us_write (st_parameter_dt *dtp, int continued)
{
- size_t nbytes;
+ ssize_t nbytes;
gfc_offset dummy;
dummy = 0;
else
nbytes = compile_options.record_marker ;
- if (swrite (dtp->u.p.current_unit->s, &dummy, &nbytes) != 0)
+ if (swrite (dtp->u.p.current_unit->s, &dummy, nbytes) != nbytes)
generate_error (&dtp->common, LIBERROR_OS, NULL);
/* For sequential unformatted, if RECL= was not specified in the OPEN
{
case FORMATTED_STREAM:
case UNFORMATTED_STREAM:
- /* There are no records with stream I/O. Set the default position
- to the beginning of the file if no position was specified. */
- if ((dtp->common.flags & IOPARM_DT_HAS_REC) == 0)
- dtp->u.p.current_unit->strm_pos = 1;
+ /* There are no records with stream I/O. If the position was specified
+ data_transfer_init has already positioned the file. If no position
+ was specified, we continue from where we last left off. I.e.
+ there is nothing to do here. */
break;
case UNFORMATTED_SEQUENTIAL:
namelist_info *ionml;
ionml = ((cf & IOPARM_DT_IONML_SET) != 0) ? dtp->u.p.ionml : NULL;
+
memset (&dtp->u.p, 0, sizeof (dtp->u.p));
+
dtp->u.p.ionml = ionml;
dtp->u.p.mode = read_flag ? READING : WRITING;
dtp->u.p.current_unit = get_unit (dtp, 1);
if (dtp->u.p.current_unit->s == NULL)
- { /* Open the unit with some default flags. */
- st_parameter_open opp;
- unit_convert conv;
+ { /* Open the unit with some default flags. */
+ st_parameter_open opp;
+ unit_convert conv;
- if (dtp->common.unit < 0)
- {
- close_unit (dtp->u.p.current_unit);
- dtp->u.p.current_unit = NULL;
- generate_error (&dtp->common, LIBERROR_BAD_OPTION,
- "Bad unit number in OPEN statement");
- return;
- }
- memset (&u_flags, '\0', sizeof (u_flags));
- u_flags.access = ACCESS_SEQUENTIAL;
- u_flags.action = ACTION_READWRITE;
-
- /* Is it unformatted? */
- if (!(cf & (IOPARM_DT_HAS_FORMAT | IOPARM_DT_LIST_FORMAT
- | IOPARM_DT_IONML_SET)))
- u_flags.form = FORM_UNFORMATTED;
- else
- u_flags.form = FORM_UNSPECIFIED;
-
- u_flags.delim = DELIM_UNSPECIFIED;
- u_flags.blank = BLANK_UNSPECIFIED;
- u_flags.pad = PAD_UNSPECIFIED;
- u_flags.status = STATUS_UNKNOWN;
-
- conv = get_unformatted_convert (dtp->common.unit);
-
- if (conv == GFC_CONVERT_NONE)
- conv = compile_options.convert;
-
- /* We use l8_to_l4_offset, which is 0 on little-endian machines
- and 1 on big-endian machines. */
- switch (conv)
- {
- case GFC_CONVERT_NATIVE:
- case GFC_CONVERT_SWAP:
- break;
+ if (dtp->common.unit < 0)
+ {
+ close_unit (dtp->u.p.current_unit);
+ dtp->u.p.current_unit = NULL;
+ generate_error (&dtp->common, LIBERROR_BAD_OPTION,
+ "Bad unit number in statement");
+ return;
+ }
+ memset (&u_flags, '\0', sizeof (u_flags));
+ u_flags.access = ACCESS_SEQUENTIAL;
+ u_flags.action = ACTION_READWRITE;
+
+ /* Is it unformatted? */
+ if (!(cf & (IOPARM_DT_HAS_FORMAT | IOPARM_DT_LIST_FORMAT
+ | IOPARM_DT_IONML_SET)))
+ u_flags.form = FORM_UNFORMATTED;
+ else
+ u_flags.form = FORM_UNSPECIFIED;
+
+ u_flags.delim = DELIM_UNSPECIFIED;
+ u_flags.blank = BLANK_UNSPECIFIED;
+ u_flags.pad = PAD_UNSPECIFIED;
+ u_flags.decimal = DECIMAL_UNSPECIFIED;
+ u_flags.encoding = ENCODING_UNSPECIFIED;
+ u_flags.async = ASYNC_UNSPECIFIED;
+ u_flags.round = ROUND_UNSPECIFIED;
+ u_flags.sign = SIGN_UNSPECIFIED;
+
+ u_flags.status = STATUS_UNKNOWN;
+
+ conv = get_unformatted_convert (dtp->common.unit);
+
+ if (conv == GFC_CONVERT_NONE)
+ conv = compile_options.convert;
+
+ /* We use big_endian, which is 0 on little-endian machines
+ and 1 on big-endian machines. */
+ switch (conv)
+ {
+ case GFC_CONVERT_NATIVE:
+ case GFC_CONVERT_SWAP:
+ break;
- case GFC_CONVERT_BIG:
- conv = l8_to_l4_offset ? GFC_CONVERT_NATIVE : GFC_CONVERT_SWAP;
- break;
+ case GFC_CONVERT_BIG:
+ conv = big_endian ? GFC_CONVERT_NATIVE : GFC_CONVERT_SWAP;
+ break;
- case GFC_CONVERT_LITTLE:
- conv = l8_to_l4_offset ? GFC_CONVERT_SWAP : GFC_CONVERT_NATIVE;
- break;
+ case GFC_CONVERT_LITTLE:
+ conv = big_endian ? GFC_CONVERT_SWAP : GFC_CONVERT_NATIVE;
+ break;
- default:
- internal_error (&opp.common, "Illegal value for CONVERT");
- break;
- }
-
- u_flags.convert = conv;
-
- opp.common = dtp->common;
- opp.common.flags &= IOPARM_COMMON_MASK;
- dtp->u.p.current_unit = new_unit (&opp, dtp->u.p.current_unit, &u_flags);
- dtp->common.flags &= ~IOPARM_COMMON_MASK;
- dtp->common.flags |= (opp.common.flags & IOPARM_COMMON_MASK);
- if (dtp->u.p.current_unit == NULL)
- return;
- }
+ default:
+ internal_error (&opp.common, "Illegal value for CONVERT");
+ break;
+ }
+
+ u_flags.convert = conv;
+
+ opp.common = dtp->common;
+ opp.common.flags &= IOPARM_COMMON_MASK;
+ dtp->u.p.current_unit = new_unit (&opp, dtp->u.p.current_unit, &u_flags);
+ dtp->common.flags &= ~IOPARM_COMMON_MASK;
+ dtp->common.flags |= (opp.common.flags & IOPARM_COMMON_MASK);
+ if (dtp->u.p.current_unit == NULL)
+ return;
+ }
/* Check the action. */
if ((cf & IOPARM_DT_HAS_NAMELIST_NAME) != 0 && dtp->u.p.ionml != NULL)
{
if ((cf & IOPARM_DT_HAS_FORMAT) != 0)
- generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "A format cannot be specified with a namelist");
+ {
+ generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
+ "A format cannot be specified with a namelist");
+ return;
+ }
}
else if (dtp->u.p.current_unit->flags.form == FORM_FORMATTED &&
!(cf & (IOPARM_DT_HAS_FORMAT | IOPARM_DT_LIST_FORMAT)))
{
generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
"Missing format for FORMATTED data transfer");
+ return;
}
if (is_internal_unit (dtp)
return;
}
- if (dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL
- && (cf & IOPARM_DT_HAS_REC) != 0)
+ if (dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL)
{
- generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "Record number not allowed for sequential access data transfer");
- return;
- }
+ if ((cf & IOPARM_DT_HAS_REC) != 0)
+ {
+ generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
+ "Record number not allowed for sequential access "
+ "data transfer");
+ return;
+ }
+
+ if (dtp->u.p.current_unit->endfile == AFTER_ENDFILE)
+ {
+ generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
+ "Sequential READ or WRITE not allowed after "
+ "EOF marker, possibly use REWIND or BACKSPACE");
+ return;
+ }
+ }
/* Process the ADVANCE option. */
dtp->u.p.advance_status
if (dtp->u.p.current_unit->flags.access == ACCESS_DIRECT)
{
generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "ADVANCE specification conflicts with sequential access");
+ "ADVANCE specification conflicts with sequential "
+ "access");
return;
}
if (read_flag)
{
+ dtp->u.p.current_unit->previous_nonadvancing_write = 0;
+
if ((cf & IOPARM_EOR) != 0 && dtp->u.p.advance_status != ADVANCE_NO)
{
generate_error (&dtp->common, LIBERROR_MISSING_OPTION,
return;
}
- if ((cf & IOPARM_DT_HAS_SIZE) != 0 && dtp->u.p.advance_status != ADVANCE_NO)
+ if ((cf & IOPARM_DT_HAS_SIZE) != 0
+ && dtp->u.p.advance_status != ADVANCE_NO)
{
generate_error (&dtp->common, LIBERROR_MISSING_OPTION,
- "SIZE specification requires an ADVANCE specification of NO");
+ "SIZE specification requires an ADVANCE "
+ "specification of NO");
return;
}
}
if ((cf & IOPARM_END) != 0)
{
generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "END specification cannot appear in a write statement");
+ "END specification cannot appear in a write "
+ "statement");
return;
}
if ((cf & IOPARM_EOR) != 0)
{
generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "EOR specification cannot appear in a write statement");
+ "EOR specification cannot appear in a write "
+ "statement");
return;
}
if ((cf & IOPARM_DT_HAS_SIZE) != 0)
{
generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
- "SIZE specification cannot appear in a write statement");
+ "SIZE specification cannot appear in a write "
+ "statement");
return;
}
}
if (dtp->u.p.advance_status == ADVANCE_UNSPECIFIED)
dtp->u.p.advance_status = ADVANCE_YES;
+ /* Check the decimal mode. */
+ dtp->u.p.current_unit->decimal_status
+ = !(cf & IOPARM_DT_HAS_DECIMAL) ? DECIMAL_UNSPECIFIED :
+ find_option (&dtp->common, dtp->decimal, dtp->decimal_len,
+ decimal_opt, "Bad DECIMAL parameter in data transfer "
+ "statement");
+
+ if (dtp->u.p.current_unit->decimal_status == DECIMAL_UNSPECIFIED)
+ dtp->u.p.current_unit->decimal_status = dtp->u.p.current_unit->flags.decimal;
+
+ /* Check the round mode. */
+ dtp->u.p.current_unit->round_status
+ = !(cf & IOPARM_DT_HAS_ROUND) ? ROUND_UNSPECIFIED :
+ find_option (&dtp->common, dtp->round, dtp->round_len,
+ round_opt, "Bad ROUND parameter in data transfer "
+ "statement");
+
+ if (dtp->u.p.current_unit->round_status == ROUND_UNSPECIFIED)
+ dtp->u.p.current_unit->round_status = dtp->u.p.current_unit->flags.round;
+
+ /* Check the sign mode. */
+ dtp->u.p.sign_status
+ = !(cf & IOPARM_DT_HAS_SIGN) ? SIGN_UNSPECIFIED :
+ find_option (&dtp->common, dtp->sign, dtp->sign_len, sign_opt,
+ "Bad SIGN parameter in data transfer statement");
+
+ if (dtp->u.p.sign_status == SIGN_UNSPECIFIED)
+ dtp->u.p.sign_status = dtp->u.p.current_unit->flags.sign;
+
+ /* Check the blank mode. */
+ dtp->u.p.blank_status
+ = !(cf & IOPARM_DT_HAS_BLANK) ? BLANK_UNSPECIFIED :
+ find_option (&dtp->common, dtp->blank, dtp->blank_len,
+ blank_opt,
+ "Bad BLANK parameter in data transfer statement");
+
+ if (dtp->u.p.blank_status == BLANK_UNSPECIFIED)
+ dtp->u.p.blank_status = dtp->u.p.current_unit->flags.blank;
+
+ /* Check the delim mode. */
+ dtp->u.p.current_unit->delim_status
+ = !(cf & IOPARM_DT_HAS_DELIM) ? DELIM_UNSPECIFIED :
+ find_option (&dtp->common, dtp->delim, dtp->delim_len,
+ delim_opt, "Bad DELIM parameter in data transfer statement");
+
+ if (dtp->u.p.current_unit->delim_status == DELIM_UNSPECIFIED)
+ {
+ if (ionml && dtp->u.p.current_unit->flags.delim == DELIM_UNSPECIFIED)
+ dtp->u.p.current_unit->delim_status =
+ compile_options.allow_std & GFC_STD_GNU ? DELIM_QUOTE : DELIM_NONE;
+ else
+ dtp->u.p.current_unit->delim_status = dtp->u.p.current_unit->flags.delim;
+ }
+
+ /* Check the pad mode. */
+ dtp->u.p.current_unit->pad_status
+ = !(cf & IOPARM_DT_HAS_PAD) ? PAD_UNSPECIFIED :
+ find_option (&dtp->common, dtp->pad, dtp->pad_len, pad_opt,
+ "Bad PAD parameter in data transfer statement");
+
+ if (dtp->u.p.current_unit->pad_status == PAD_UNSPECIFIED)
+ dtp->u.p.current_unit->pad_status = dtp->u.p.current_unit->flags.pad;
+
+ /* Check to see if we might be reading what we wrote before */
+
+ if (dtp->u.p.mode != dtp->u.p.current_unit->mode
+ && !is_internal_unit (dtp))
+ {
+ int pos = fbuf_reset (dtp->u.p.current_unit);
+ if (pos != 0)
+ sseek (dtp->u.p.current_unit->s, pos, SEEK_CUR);
+ sflush(dtp->u.p.current_unit->s);
+ }
+
+ /* Check the POS= specifier: that it is in range and that it is used with a
+ unit that has been connected for STREAM access. F2003 9.5.1.10. */
+
+ if (((cf & IOPARM_DT_HAS_POS) != 0))
+ {
+ if (is_stream_io (dtp))
+ {
+
+ if (dtp->pos <= 0)
+ {
+ generate_error (&dtp->common, LIBERROR_BAD_OPTION,
+ "POS=specifier must be positive");
+ return;
+ }
+
+ if (dtp->pos >= dtp->u.p.current_unit->maxrec)
+ {
+ generate_error (&dtp->common, LIBERROR_BAD_OPTION,
+ "POS=specifier too large");
+ return;
+ }
+
+ dtp->rec = dtp->pos;
+
+ if (dtp->u.p.mode == READING)
+ {
+ /* Reset the endfile flag; if we hit EOF during reading
+ we'll set the flag and generate an error at that point
+ rather than worrying about it here. */
+ dtp->u.p.current_unit->endfile = NO_ENDFILE;
+ }
+
+ if (dtp->pos != dtp->u.p.current_unit->strm_pos)
+ {
+ fbuf_flush (dtp->u.p.current_unit, dtp->u.p.mode);
+ if (sseek (dtp->u.p.current_unit->s, dtp->pos - 1, SEEK_SET) < 0)
+ {
+ generate_error (&dtp->common, LIBERROR_OS, NULL);
+ return;
+ }
+ dtp->u.p.current_unit->strm_pos = dtp->pos;
+ }
+ }
+ else
+ {
+ generate_error (&dtp->common, LIBERROR_BAD_OPTION,
+ "POS=specifier not allowed, "
+ "Try OPEN with ACCESS='stream'");
+ return;
+ }
+ }
+
+
/* Sanity checks on the record number. */
if ((cf & IOPARM_DT_HAS_REC) != 0)
{
return;
}
- /* Check to see if we might be reading what we wrote before */
+ /* Make sure format buffer is reset. */
+ if (dtp->u.p.current_unit->flags.form == FORM_FORMATTED)
+ fbuf_reset (dtp->u.p.current_unit);
- if (dtp->u.p.mode == READING
- && dtp->u.p.current_unit->mode == WRITING
- && !is_internal_unit (dtp))
- flush(dtp->u.p.current_unit->s);
/* Check whether the record exists to be read. Only
a partial record needs to exist. */
- if (dtp->u.p.mode == READING && (dtp->rec -1)
- * dtp->u.p.current_unit->recl >= file_length (dtp->u.p.current_unit->s))
+ if (dtp->u.p.mode == READING && (dtp->rec - 1)
+ * dtp->u.p.current_unit->recl >= ssize (dtp->u.p.current_unit->s))
{
generate_error (&dtp->common, LIBERROR_BAD_OPTION,
"Non-existing record number");
}
/* Position the file. */
- if (!is_stream_io (dtp))
- {
- if (sseek (dtp->u.p.current_unit->s, (gfc_offset) (dtp->rec - 1)
- * dtp->u.p.current_unit->recl) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- return;
- }
- }
- else
- dtp->u.p.current_unit->strm_pos = dtp->rec;
+ if (sseek (dtp->u.p.current_unit->s, (gfc_offset) (dtp->rec - 1)
+ * dtp->u.p.current_unit->recl, SEEK_SET) < 0)
+ {
+ generate_error (&dtp->common, LIBERROR_OS, NULL);
+ return;
+ }
- }
+ /* TODO: This is required to maintain compatibility between
+ 4.3 and 4.4 runtime. Remove when ABI changes from 4.3 */
+
+ if (is_stream_io (dtp))
+ dtp->u.p.current_unit->strm_pos = dtp->rec;
- /* Overwriting an existing sequential file ?
- it is always safe to truncate the file on the first write */
- if (dtp->u.p.mode == WRITING
- && dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL
- && dtp->u.p.current_unit->last_record == 0
- && !is_preconnected(dtp->u.p.current_unit->s))
- struncate(dtp->u.p.current_unit->s);
+ /* TODO: Un-comment this code when ABI changes from 4.3.
+ if (dtp->u.p.current_unit->flags.access == ACCESS_STREAM)
+ {
+ generate_error (&dtp->common, LIBERROR_OPTION_CONFLICT,
+ "Record number not allowed for stream access "
+ "data transfer");
+ return;
+ } */
+ }
/* Bugware for badly written mixed C-Fortran I/O. */
- flush_if_preconnected(dtp->u.p.current_unit->s);
+ if (!is_internal_unit (dtp))
+ flush_if_preconnected(dtp->u.p.current_unit->s);
dtp->u.p.current_unit->mode = dtp->u.p.mode;
- /* Set the initial value of flags. */
-
- dtp->u.p.blank_status = dtp->u.p.current_unit->flags.blank;
- dtp->u.p.sign_status = SIGN_S;
-
/* Set the maximum position reached from the previous I/O operation. This
could be greater than zero from a previous non-advancing write. */
dtp->u.p.max_pos = dtp->u.p.current_unit->saved_pos;
pre_position (dtp);
+
/* Set up the subroutine that will handle the transfers. */
else
{
if ((cf & IOPARM_DT_LIST_FORMAT) != 0)
- dtp->u.p.transfer = list_formatted_read;
+ {
+ dtp->u.p.last_char = EOF - 1;
+ dtp->u.p.transfer = list_formatted_read;
+ }
else
dtp->u.p.transfer = formatted_transfer;
}
}
/* Initialize an array_loop_spec given the array descriptor. The function
- returns the index of the last element of the array. */
+ returns the index of the last element of the array, and also returns
+ starting record, where the first I/O goes to (necessary in case of
+ negative strides). */
gfc_offset
-init_loop_spec (gfc_array_char *desc, array_loop_spec *ls)
+init_loop_spec (gfc_array_char *desc, array_loop_spec *ls,
+ gfc_offset *start_record)
{
int rank = GFC_DESCRIPTOR_RANK(desc);
int i;
gfc_offset index;
+ int empty;
+ empty = 0;
index = 1;
+ *start_record = 0;
+
for (i=0; i<rank; i++)
{
- ls[i].idx = desc->dim[i].lbound;
- ls[i].start = desc->dim[i].lbound;
- ls[i].end = desc->dim[i].ubound;
- ls[i].step = desc->dim[i].stride;
-
- index += (desc->dim[i].ubound - desc->dim[i].lbound)
- * desc->dim[i].stride;
+ ls[i].idx = GFC_DESCRIPTOR_LBOUND(desc,i);
+ ls[i].start = GFC_DESCRIPTOR_LBOUND(desc,i);
+ ls[i].end = GFC_DESCRIPTOR_UBOUND(desc,i);
+ ls[i].step = GFC_DESCRIPTOR_STRIDE(desc,i);
+ empty = empty || (GFC_DESCRIPTOR_UBOUND(desc,i)
+ < GFC_DESCRIPTOR_LBOUND(desc,i));
+
+ if (GFC_DESCRIPTOR_STRIDE(desc,i) > 0)
+ {
+ index += (GFC_DESCRIPTOR_EXTENT(desc,i) - 1)
+ * GFC_DESCRIPTOR_STRIDE(desc,i);
+ }
+ else
+ {
+ index -= (GFC_DESCRIPTOR_EXTENT(desc,i) - 1)
+ * GFC_DESCRIPTOR_STRIDE(desc,i);
+ *start_record -= (GFC_DESCRIPTOR_EXTENT(desc,i) - 1)
+ * GFC_DESCRIPTOR_STRIDE(desc,i);
+ }
}
- return index;
+
+ if (empty)
+ return 0;
+ else
+ return index;
}
/* Determine the index to the next record in an internal unit array by
- by incrementing through the array_loop_spec. TODO: Implement handling
- negative strides. */
+ by incrementing through the array_loop_spec. */
gfc_offset
-next_array_record (st_parameter_dt *dtp, array_loop_spec *ls)
+next_array_record (st_parameter_dt *dtp, array_loop_spec *ls, int *finished)
{
int i, carry;
gfc_offset index;
carry = 1;
index = 0;
-
+
for (i = 0; i < dtp->u.p.current_unit->rank; i++)
{
if (carry)
index = index + (ls[i].idx - ls[i].start) * ls[i].step;
}
+ *finished = carry;
+
return index;
}
read chunks of size MAX_READ until we get to the right
position. */
-#define MAX_READ 4096
-
static void
-skip_record (st_parameter_dt *dtp, size_t bytes)
+skip_record (st_parameter_dt *dtp, ssize_t bytes)
{
- gfc_offset new;
- int rlength, length;
- char *p;
+ ssize_t rlength, readb;
+ static const ssize_t MAX_READ = 4096;
+ char p[MAX_READ];
dtp->u.p.current_unit->bytes_left_subrecord += bytes;
if (dtp->u.p.current_unit->bytes_left_subrecord == 0)
return;
- if (is_seekable (dtp->u.p.current_unit->s))
+ /* Direct access files do not generate END conditions,
+ only I/O errors. */
+ if (sseek (dtp->u.p.current_unit->s,
+ dtp->u.p.current_unit->bytes_left_subrecord, SEEK_CUR) < 0)
{
- new = file_position (dtp->u.p.current_unit->s)
- + dtp->u.p.current_unit->bytes_left_subrecord;
-
- /* Direct access files do not generate END conditions,
- only I/O errors. */
- if (sseek (dtp->u.p.current_unit->s, new) == FAILURE)
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- }
- else
- { /* Seek by reading data. */
+ /* Seeking failed, fall back to seeking by reading data. */
while (dtp->u.p.current_unit->bytes_left_subrecord > 0)
{
- rlength = length =
- (MAX_READ > dtp->u.p.current_unit->bytes_left_subrecord) ?
+ rlength =
+ (MAX_READ < dtp->u.p.current_unit->bytes_left_subrecord) ?
MAX_READ : dtp->u.p.current_unit->bytes_left_subrecord;
- p = salloc_r (dtp->u.p.current_unit->s, &rlength);
- if (p == NULL)
+ readb = sread (dtp->u.p.current_unit->s, p, rlength);
+ if (readb < 0)
{
generate_error (&dtp->common, LIBERROR_OS, NULL);
return;
}
- dtp->u.p.current_unit->bytes_left_subrecord -= length;
+ dtp->u.p.current_unit->bytes_left_subrecord -= readb;
}
+ return;
}
-
+ dtp->u.p.current_unit->bytes_left_subrecord = 0;
}
-#undef MAX_READ
/* Advance to the next record reading unformatted files, taking
care of subrecords. If complete_record is nonzero, we loop
}
}
+
+static gfc_offset
+min_off (gfc_offset a, gfc_offset b)
+{
+ return (a < b ? a : b);
+}
+
+
/* Space to the next record for read mode. */
static void
-next_record_r (st_parameter_dt *dtp)
+next_record_r (st_parameter_dt *dtp, int done)
{
gfc_offset record;
- int length, bytes_left;
- char *p;
+ int bytes_left;
+ char p;
+ int cc;
switch (current_mode (dtp))
{
case FORMATTED_DIRECT:
case UNFORMATTED_DIRECT:
- skip_record (dtp, 0);
+ skip_record (dtp, dtp->u.p.current_unit->bytes_left);
break;
case FORMATTED_STREAM:
case FORMATTED_SEQUENTIAL:
- length = 1;
- /* sf_read has already terminated input because of an '\n' */
+ /* read_sf has already terminated input because of an '\n', or
+ we have hit EOF. */
if (dtp->u.p.sf_seen_eor)
{
dtp->u.p.sf_seen_eor = 0;
{
if (is_array_io (dtp))
{
- record = next_array_record (dtp, dtp->u.p.current_unit->ls);
+ int finished;
+
+ record = next_array_record (dtp, dtp->u.p.current_unit->ls,
+ &finished);
+ if (!done && finished)
+ hit_eof (dtp);
/* Now seek to this record. */
record = record * dtp->u.p.current_unit->recl;
- if (sseek (dtp->u.p.current_unit->s, record) == FAILURE)
+ if (sseek (dtp->u.p.current_unit->s, record, SEEK_SET) < 0)
{
generate_error (&dtp->common, LIBERROR_INTERNAL_UNIT, NULL);
break;
else
{
bytes_left = (int) dtp->u.p.current_unit->bytes_left;
- p = salloc_r (dtp->u.p.current_unit->s, &bytes_left);
- if (p != NULL)
- dtp->u.p.current_unit->bytes_left
- = dtp->u.p.current_unit->recl;
+ bytes_left = min_off (bytes_left,
+ ssize (dtp->u.p.current_unit->s)
+ - stell (dtp->u.p.current_unit->s));
+ if (sseek (dtp->u.p.current_unit->s,
+ bytes_left, SEEK_CUR) < 0)
+ {
+ generate_error (&dtp->common, LIBERROR_INTERNAL_UNIT, NULL);
+ break;
+ }
+ dtp->u.p.current_unit->bytes_left
+ = dtp->u.p.current_unit->recl;
}
break;
}
- else do
+ else
{
- p = salloc_r (dtp->u.p.current_unit->s, &length);
-
- if (p == NULL)
- {
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- break;
- }
-
- if (length == 0)
+ do
{
- dtp->u.p.current_unit->endfile = AT_ENDFILE;
- break;
+ errno = 0;
+ cc = fbuf_getc (dtp->u.p.current_unit);
+ if (cc == EOF)
+ {
+ if (errno != 0)
+ generate_error (&dtp->common, LIBERROR_OS, NULL);
+ else
+ {
+ if (is_stream_io (dtp)
+ || dtp->u.p.current_unit->pad_status == PAD_NO
+ || dtp->u.p.current_unit->bytes_left
+ == dtp->u.p.current_unit->recl)
+ hit_eof (dtp);
+ }
+ break;
+ }
+
+ if (is_stream_io (dtp))
+ dtp->u.p.current_unit->strm_pos++;
+
+ p = (char) cc;
}
-
- if (is_stream_io (dtp))
- dtp->u.p.current_unit->strm_pos++;
+ while (p != '\n');
}
- while (*p != '\n');
-
break;
}
-
- if (dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL
- && !dtp->u.p.namelist_mode
- && dtp->u.p.current_unit->endfile == NO_ENDFILE
- && (file_length (dtp->u.p.current_unit->s) ==
- file_position (dtp->u.p.current_unit->s)))
- dtp->u.p.current_unit->endfile = AT_ENDFILE;
-
}
/* Small utility function to write a record marker, taking care of
byte swapping and of choosing the correct size. */
-inline static int
+static int
write_us_marker (st_parameter_dt *dtp, const gfc_offset buf)
{
size_t len;
GFC_INTEGER_4 buf4;
GFC_INTEGER_8 buf8;
- char p[sizeof (GFC_INTEGER_8)];
if (compile_options.record_marker == 0)
len = sizeof (GFC_INTEGER_4);
len = compile_options.record_marker;
/* Only GFC_CONVERT_NATIVE and GFC_CONVERT_SWAP are valid here. */
- if (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE)
+ if (likely (dtp->u.p.current_unit->flags.convert == GFC_CONVERT_NATIVE))
{
switch (len)
{
case sizeof (GFC_INTEGER_4):
buf4 = buf;
- return swrite (dtp->u.p.current_unit->s, &buf4, &len);
+ return swrite (dtp->u.p.current_unit->s, &buf4, len);
break;
case sizeof (GFC_INTEGER_8):
buf8 = buf;
- return swrite (dtp->u.p.current_unit->s, &buf8, &len);
+ return swrite (dtp->u.p.current_unit->s, &buf8, len);
break;
default:
}
else
{
+ uint32_t u32;
+ uint64_t u64;
switch (len)
{
case sizeof (GFC_INTEGER_4):
buf4 = buf;
- reverse_memcpy (p, &buf4, sizeof (GFC_INTEGER_4));
- return swrite (dtp->u.p.current_unit->s, p, &len);
+ memcpy (&u32, &buf4, sizeof (u32));
+ u32 = __builtin_bswap32 (u32);
+ return swrite (dtp->u.p.current_unit->s, &u32, len);
break;
case sizeof (GFC_INTEGER_8):
buf8 = buf;
- reverse_memcpy (p, &buf8, sizeof (GFC_INTEGER_8));
- return swrite (dtp->u.p.current_unit->s, p, &len);
+ memcpy (&u64, &buf8, sizeof (u64));
+ u64 = __builtin_bswap64 (u64);
+ return swrite (dtp->u.p.current_unit->s, &u64, len);
break;
default:
static void
next_record_w_unf (st_parameter_dt *dtp, int next_subrecord)
{
- gfc_offset c, m, m_write;
- size_t record_marker;
+ gfc_offset m, m_write, record_marker;
/* Bytes written. */
m = dtp->u.p.current_unit->recl_subrecord
- dtp->u.p.current_unit->bytes_left_subrecord;
- c = file_position (dtp->u.p.current_unit->s);
-
- /* Write the length tail. If we finish a record containing
- subrecords, we write out the negative length. */
-
- if (dtp->u.p.current_unit->continued)
- m_write = -m;
- else
- m_write = m;
-
- if (write_us_marker (dtp, m_write) != 0)
- goto io_error;
if (compile_options.record_marker == 0)
record_marker = sizeof (GFC_INTEGER_4);
/* Seek to the head and overwrite the bogus length with the real
length. */
- if (sseek (dtp->u.p.current_unit->s, c - m - record_marker)
- == FAILURE)
+ if (unlikely (sseek (dtp->u.p.current_unit->s, - m - record_marker,
+ SEEK_CUR) < 0))
goto io_error;
if (next_subrecord)
else
m_write = m;
- if (write_us_marker (dtp, m_write) != 0)
+ if (unlikely (write_us_marker (dtp, m_write) < 0))
goto io_error;
/* Seek past the end of the current record. */
- if (sseek (dtp->u.p.current_unit->s, c + record_marker) == FAILURE)
+ if (unlikely (sseek (dtp->u.p.current_unit->s, m, SEEK_CUR) < 0))
+ goto io_error;
+
+ /* Write the length tail. If we finish a record containing
+ subrecords, we write out the negative length. */
+
+ if (dtp->u.p.current_unit->continued)
+ m_write = -m;
+ else
+ m_write = m;
+
+ if (unlikely (write_us_marker (dtp, m_write) < 0))
goto io_error;
return;
}
+
+/* Utility function like memset() but operating on streams. Return
+ value is same as for POSIX write(). */
+
+static ssize_t
+sset (stream * s, int c, ssize_t nbyte)
+{
+ static const int WRITE_CHUNK = 256;
+ char p[WRITE_CHUNK];
+ ssize_t bytes_left, trans;
+
+ if (nbyte < WRITE_CHUNK)
+ memset (p, c, nbyte);
+ else
+ memset (p, c, WRITE_CHUNK);
+
+ bytes_left = nbyte;
+ while (bytes_left > 0)
+ {
+ trans = (bytes_left < WRITE_CHUNK) ? bytes_left : WRITE_CHUNK;
+ trans = swrite (s, p, trans);
+ if (trans <= 0)
+ return trans;
+ bytes_left -= trans;
+ }
+
+ return nbyte - bytes_left;
+}
+
+
/* Position to the next record in write mode. */
static void
{
gfc_offset m, record, max_pos;
int length;
- char *p;
/* Zero counters for X- and T-editing. */
max_pos = dtp->u.p.max_pos;
if (dtp->u.p.current_unit->bytes_left == 0)
break;
+ fbuf_seek (dtp->u.p.current_unit, 0, SEEK_END);
+ fbuf_flush (dtp->u.p.current_unit, WRITING);
if (sset (dtp->u.p.current_unit->s, ' ',
- dtp->u.p.current_unit->bytes_left) == FAILURE)
+ dtp->u.p.current_unit->bytes_left)
+ != dtp->u.p.current_unit->bytes_left)
goto io_error;
break;
case UNFORMATTED_DIRECT:
- if (sfree (dtp->u.p.current_unit->s) == FAILURE)
- goto io_error;
+ if (dtp->u.p.current_unit->bytes_left > 0)
+ {
+ length = (int) dtp->u.p.current_unit->bytes_left;
+ if (sset (dtp->u.p.current_unit->s, 0, length) != length)
+ goto io_error;
+ }
break;
case UNFORMATTED_SEQUENTIAL:
if (is_internal_unit (dtp))
{
+ char *p;
if (is_array_io (dtp))
{
+ int finished;
+
length = (int) dtp->u.p.current_unit->bytes_left;
/* If the farthest position reached is greater than current
if (max_pos > m)
{
length = (int) (max_pos - m);
- p = salloc_w (dtp->u.p.current_unit->s, &length);
+ if (sseek (dtp->u.p.current_unit->s,
+ length, SEEK_CUR) < 0)
+ {
+ generate_error (&dtp->common, LIBERROR_INTERNAL_UNIT, NULL);
+ return;
+ }
length = (int) (dtp->u.p.current_unit->recl - max_pos);
}
- if (sset (dtp->u.p.current_unit->s, ' ', length) == FAILURE)
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
+ p = write_block (dtp, length);
+ if (p == NULL)
+ return;
+
+ if (unlikely (is_char4_unit (dtp)))
+ {
+ gfc_char4_t *p4 = (gfc_char4_t *) p;
+ memset4 (p4, ' ', length);
}
+ else
+ memset (p, ' ', length);
/* Now that the current record has been padded out,
determine where the next record in the array is. */
- record = next_array_record (dtp, dtp->u.p.current_unit->ls);
- if (record == 0)
+ record = next_array_record (dtp, dtp->u.p.current_unit->ls,
+ &finished);
+ if (finished)
dtp->u.p.current_unit->endfile = AT_ENDFILE;
/* Now seek to this record */
record = record * dtp->u.p.current_unit->recl;
- if (sseek (dtp->u.p.current_unit->s, record) == FAILURE)
+ if (sseek (dtp->u.p.current_unit->s, record, SEEK_SET) < 0)
{
generate_error (&dtp->common, LIBERROR_INTERNAL_UNIT, NULL);
return;
if (max_pos > m)
{
length = (int) (max_pos - m);
- p = salloc_w (dtp->u.p.current_unit->s, &length);
+ if (sseek (dtp->u.p.current_unit->s,
+ length, SEEK_CUR) < 0)
+ {
+ generate_error (&dtp->common, LIBERROR_INTERNAL_UNIT, NULL);
+ return;
+ }
length = (int) (dtp->u.p.current_unit->recl - max_pos);
}
else
length = (int) dtp->u.p.current_unit->bytes_left;
}
-
- if (sset (dtp->u.p.current_unit->s, ' ', length) == FAILURE)
+ if (length > 0)
{
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
+ p = write_block (dtp, length);
+ if (p == NULL)
+ return;
+
+ if (unlikely (is_char4_unit (dtp)))
+ {
+ gfc_char4_t *p4 = (gfc_char4_t *) p;
+ memset4 (p4, (gfc_char4_t) ' ', length);
+ }
+ else
+ memset (p, ' ', length);
}
}
}
else
{
- /* If this is the last call to next_record move to the farthest
- position reached in preparation for completing the record.
- (for file unit) */
- if (done)
- {
- m = dtp->u.p.current_unit->recl -
- dtp->u.p.current_unit->bytes_left;
- if (max_pos > m)
- {
- length = (int) (max_pos - m);
- p = salloc_w (dtp->u.p.current_unit->s, &length);
- }
- }
- size_t len;
- const char crlf[] = "\r\n";
#ifdef HAVE_CRLF
- len = 2;
+ const int len = 2;
#else
- len = 1;
+ const int len = 1;
#endif
- if (swrite (dtp->u.p.current_unit->s, &crlf[2-len], &len) != 0)
- goto io_error;
-
+ fbuf_seek (dtp->u.p.current_unit, 0, SEEK_END);
+ char * p = fbuf_alloc (dtp->u.p.current_unit, len);
+ if (!p)
+ goto io_error;
+#ifdef HAVE_CRLF
+ *(p++) = '\r';
+#endif
+ *p = '\n';
if (is_stream_io (dtp))
- dtp->u.p.current_unit->strm_pos += len;
+ {
+ dtp->u.p.current_unit->strm_pos += len;
+ if (dtp->u.p.current_unit->strm_pos
+ < ssize (dtp->u.p.current_unit->s))
+ unit_truncate (dtp->u.p.current_unit,
+ dtp->u.p.current_unit->strm_pos - 1,
+ &dtp->common);
+ }
}
break;
dtp->u.p.current_unit->read_bad = 0;
if (dtp->u.p.mode == READING)
- next_record_r (dtp);
+ next_record_r (dtp, done);
else
next_record_w (dtp, done);
if (!is_stream_io (dtp))
{
- /* Keep position up to date for INQUIRE */
+ /* Since we have changed the position, set it to unspecified so
+ that INQUIRE(POSITION=) knows it needs to look into it. */
if (done)
- update_position (dtp->u.p.current_unit);
+ dtp->u.p.current_unit->flags.position = POSITION_UNSPECIFIED;
dtp->u.p.current_unit->current_record = 0;
if (dtp->u.p.current_unit->flags.access == ACCESS_DIRECT)
{
- fp = file_position (dtp->u.p.current_unit->s);
+ fp = stell (dtp->u.p.current_unit->s);
/* Calculate next record, rounding up partial records. */
dtp->u.p.current_unit->last_record =
(fp + dtp->u.p.current_unit->recl - 1) /
if (!done)
pre_position (dtp);
+
+ fbuf_flush (dtp->u.p.current_unit, dtp->u.p.mode);
+ smarkeor (dtp->u.p.current_unit->s);
}
static void
finalize_transfer (st_parameter_dt *dtp)
{
- jmp_buf eof_jump;
GFC_INTEGER_4 cf = dtp->common.flags;
if ((dtp->common.flags & IOPARM_DT_HAS_SIZE) != 0)
- *dtp->size = (GFC_IO_INT) dtp->u.p.size_used;
+ *dtp->size = dtp->u.p.size_used;
if (dtp->u.p.eor_condition)
{
}
if ((dtp->common.flags & IOPARM_LIBRETURN_MASK) != IOPARM_LIBRETURN_OK)
- return;
+ {
+ if (dtp->u.p.current_unit && current_mode (dtp) == UNFORMATTED_SEQUENTIAL)
+ dtp->u.p.current_unit->current_record = 0;
+ return;
+ }
if ((dtp->u.p.ionml != NULL)
&& (cf & IOPARM_DT_HAS_NAMELIST_NAME) != 0)
if (dtp->u.p.current_unit == NULL)
return;
- dtp->u.p.eof_jump = &eof_jump;
- if (setjmp (eof_jump))
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- return;
- }
-
if ((cf & IOPARM_DT_LIST_FORMAT) != 0 && dtp->u.p.mode == READING)
{
finish_list_read (dtp);
- sfree (dtp->u.p.current_unit->s);
return;
}
+ if (dtp->u.p.mode == WRITING)
+ dtp->u.p.current_unit->previous_nonadvancing_write
+ = dtp->u.p.advance_status == ADVANCE_NO;
+
if (is_stream_io (dtp))
{
- if (dtp->u.p.current_unit->flags.form == FORM_FORMATTED)
- {
- next_record (dtp, 1);
- flush (dtp->u.p.current_unit->s);
- sfree (dtp->u.p.current_unit->s);
- }
+ if (dtp->u.p.current_unit->flags.form == FORM_FORMATTED
+ && dtp->u.p.advance_status != ADVANCE_NO)
+ next_record (dtp, 1);
+
return;
}
if (!is_internal_unit (dtp) && dtp->u.p.seen_dollar)
{
+ fbuf_flush (dtp->u.p.current_unit, dtp->u.p.mode);
dtp->u.p.seen_dollar = 0;
- sfree (dtp->u.p.current_unit->s);
return;
}
- dtp->u.p.current_unit->bytes_left);
dtp->u.p.current_unit->saved_pos =
dtp->u.p.max_pos > 0 ? dtp->u.p.max_pos - bytes_written : 0;
- flush (dtp->u.p.current_unit->s);
+ fbuf_flush (dtp->u.p.current_unit, dtp->u.p.mode);
return;
}
+ else if (dtp->u.p.current_unit->flags.form == FORM_FORMATTED
+ && dtp->u.p.mode == WRITING && !is_internal_unit (dtp))
+ fbuf_seek (dtp->u.p.current_unit, 0, SEEK_END);
dtp->u.p.current_unit->saved_pos = 0;
next_record (dtp, 1);
- sfree (dtp->u.p.current_unit->s);
}
/* Transfer function for IOLENGTH. It doesn't actually do any
size_t size, size_t nelems)
{
if ((dtp->common.flags & IOPARM_DT_HAS_IOLENGTH) != 0)
- *dtp->iolength += (GFC_IO_INT) size * nelems;
+ *dtp->iolength += (GFC_IO_INT) (size * nelems);
}
st_iolength_done (st_parameter_dt *dtp __attribute__((unused)))
{
free_ionml (dtp);
- if (dtp->u.p.scratch != NULL)
- free_mem (dtp->u.p.scratch);
library_end ();
}
library_start (&dtp->common);
data_transfer_init (dtp, 1);
-
- /* Handle complications dealing with the endfile record. */
-
- if (dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL)
- switch (dtp->u.p.current_unit->endfile)
- {
- case NO_ENDFILE:
- break;
-
- case AT_ENDFILE:
- if (!is_internal_unit (dtp))
- {
- generate_error (&dtp->common, LIBERROR_END, NULL);
- dtp->u.p.current_unit->endfile = AFTER_ENDFILE;
- dtp->u.p.current_unit->current_record = 0;
- }
- break;
-
- case AFTER_ENDFILE:
- generate_error (&dtp->common, LIBERROR_ENDFILE, NULL);
- dtp->u.p.current_unit->current_record = 0;
- break;
- }
}
extern void st_read_done (st_parameter_dt *);
st_read_done (st_parameter_dt *dtp)
{
finalize_transfer (dtp);
- free_format_data (dtp);
+ if (is_internal_unit (dtp) || dtp->u.p.format_not_saved)
+ free_format_data (dtp->u.p.fmt);
free_ionml (dtp);
- if (dtp->u.p.scratch != NULL)
- free_mem (dtp->u.p.scratch);
if (dtp->u.p.current_unit != NULL)
unlock_unit (dtp->u.p.current_unit);
case NO_ENDFILE:
/* Get rid of whatever is after this record. */
if (!is_internal_unit (dtp))
- {
- flush (dtp->u.p.current_unit->s);
- if (struncate (dtp->u.p.current_unit->s) == FAILURE)
- generate_error (&dtp->common, LIBERROR_OS, NULL);
- }
+ unit_truncate (dtp->u.p.current_unit,
+ stell (dtp->u.p.current_unit->s),
+ &dtp->common);
dtp->u.p.current_unit->endfile = AT_ENDFILE;
break;
}
- free_format_data (dtp);
+ if (is_internal_unit (dtp) || dtp->u.p.format_not_saved)
+ free_format_data (dtp->u.p.fmt);
free_ionml (dtp);
- if (dtp->u.p.scratch != NULL)
- free_mem (dtp->u.p.scratch);
if (dtp->u.p.current_unit != NULL)
unlock_unit (dtp->u.p.current_unit);
library_end ();
}
+
+/* F2003: This is a stub for the runtime portion of the WAIT statement. */
+void
+st_wait (st_parameter_wait *wtp __attribute__((unused)))
+{
+}
+
+
/* Receives the scalar information for namelist objects and stores it
in a linked list of namelist_info types. */
namelist_info *nml;
size_t var_name_len = strlen (var_name);
- nml = (namelist_info*) get_mem (sizeof (namelist_info));
+ nml = (namelist_info*) xmalloc (sizeof (namelist_info));
nml->mem_pos = var_addr;
- nml->var_name = (char*) get_mem (var_name_len + 1);
+ nml->var_name = (char*) xmalloc (var_name_len + 1);
memcpy (nml->var_name, var_name, var_name_len);
nml->var_name[var_name_len] = '\0';
if (nml->var_rank > 0)
{
nml->dim = (descriptor_dimension*)
- get_mem (nml->var_rank * sizeof (descriptor_dimension));
+ xmallocarray (nml->var_rank, sizeof (descriptor_dimension));
nml->ls = (array_loop_spec*)
- get_mem (nml->var_rank * sizeof (array_loop_spec));
+ xmallocarray (nml->var_rank, sizeof (array_loop_spec));
}
else
{
for (nml = dtp->u.p.ionml; nml->next; nml = nml->next);
- nml->dim[n].stride = stride;
- nml->dim[n].lbound = lbound;
- nml->dim[n].ubound = ubound;
+ GFC_DIMENSION_SET(nml->dim[n],lbound,ubound,stride);
}
-/* Reverse memcpy - used for byte swapping. */
-void reverse_memcpy (void *dest, const void *src, size_t n)
-{
- char *d, *s;
- size_t i;
+/* Once upon a time, a poor innocent Fortran program was reading a
+ file, when suddenly it hit the end-of-file (EOF). Unfortunately
+ the OS doesn't tell whether we're at the EOF or whether we already
+ went past it. Luckily our hero, libgfortran, keeps track of this.
+ Call this function when you detect an EOF condition. See Section
+ 9.10.2 in F2003. */
- d = (char *) dest;
- s = (char *) src + n - 1;
+void
+hit_eof (st_parameter_dt * dtp)
+{
+ dtp->u.p.current_unit->flags.position = POSITION_APPEND;
- /* Write with ascending order - this is likely faster
- on modern architectures because of write combining. */
- for (i=0; i<n; i++)
- *(d++) = *(s--);
+ if (dtp->u.p.current_unit->flags.access == ACCESS_SEQUENTIAL)
+ switch (dtp->u.p.current_unit->endfile)
+ {
+ case NO_ENDFILE:
+ case AT_ENDFILE:
+ generate_error (&dtp->common, LIBERROR_END, NULL);
+ if (!is_internal_unit (dtp) && !dtp->u.p.namelist_mode)
+ {
+ dtp->u.p.current_unit->endfile = AFTER_ENDFILE;
+ dtp->u.p.current_unit->current_record = 0;
+ }
+ else
+ dtp->u.p.current_unit->endfile = AT_ENDFILE;
+ break;
+
+ case AFTER_ENDFILE:
+ generate_error (&dtp->common, LIBERROR_ENDFILE, NULL);
+ dtp->u.p.current_unit->current_record = 0;
+ break;
+ }
+ else
+ {
+ /* Non-sequential files don't have an ENDFILE record, so we
+ can't be at AFTER_ENDFILE. */
+ dtp->u.p.current_unit->endfile = AT_ENDFILE;
+ generate_error (&dtp->common, LIBERROR_END, NULL);
+ dtp->u.p.current_unit->current_record = 0;
+ }
}