## Makefile for the toplevel directory of the GNU C++ Standard library.
##
-## Copyright (C) 1997,1998, 1999, 2000 Free Software Foundation, Inc.
+## Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003
+## Free Software Foundation, Inc.
##
## This file is part of the libstdc++ version 3 distribution.
## Process this file with automake to produce Makefile.in.
## You should have received a copy of the GNU General Public License along
## with this library; see the file COPYING. If not, write to the Free
-## Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+## Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
## USA.
-AUTOMAKE_OPTIONS = 1.3 cygnus
-MAINT_CHARSET = latin1
-
-# This helps subvert libstdcxx_interface, as calculated by devo/config.if
-# Needed so that g++ can find the correct include subdir automatically.
-INTERFACE = v3
-gxx_include_dir=$(includedir)/g++
-
-SUBDIRS = math libio src
-
-# Use $(blddir) instead of $(top_builddir) for arguments to "mkcheck"
-# because then the paths will be full pathnames, not relative
-# pathnames. (-Wl,--rpath seems to like this better.)
-check: $(top_builddir)/mkcheck
- chmod +x $(top_builddir)/mkcheck
- $(top_builddir)/mkcheck 0 `pwd` $(top_srcdir)
-
-check-install: $(top_builddir)/mkcheck
- chmod +x $(top_builddir)/mkcheck
- $(top_builddir)/mkcheck 1 `pwd` $(top_srcdir) $(prefix)
-
-#all-local: stamp-rebuild
-
-# This has already been sanity-checked by configure to a certain extent
-#stamp-rebuild: $(top_builddir)/config.status
-# if test "$(GCC_OBJDIR)" != "no"; then \
-# (cd "$(GCC_OBJDIR)/gcc" && \
-# if test -f libgcc2.ready ; then \
-# rm -f libgcc2.ready libgcc.a libgcc2.a ; \
-# $(MAKE) libgcc2.a TARGET_LIBGCC2_CFLAGS='@NAMESPACES@' ; \
-# $(MAKE) libgcc.a ; \
-# else \
-# echo '** There does not appear to be a previously-built' ; \
-# echo '** library here. Please see' ; \
-# echo '** <http://sourceware.cygnus.com/libstdc++/install.html>' ; \
-# echo '** In particular, the "Building and Installing' ; \
-# echo '** the library (without GCC sources)" section.' ; \
-# exit 1 ; \
-# fi \
-# ) \
-# fi
-# touch stamp-rebuild
+include $(top_srcdir)/fragment.am
+
+if GLIBCXX_HOSTED
+ hosted_source = libmath src po testsuite
+endif
+## Keep this list sync'd with acinclude.m4:GLIBCXX_CONFIGURE.
+SUBDIRS = include libsupc++ $(hosted_source)
+
+ACLOCAL_AMFLAGS = -I . -I .. -I ../config
+
+# These rules are messy, but are hella worth it.
+doxygen:
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`${PWD_COMMAND}`; \
+ ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+ --host_alias=${host_alias} \
+ --mode=user $${srcdir} $${builddir})
+
+doxygen-maint:
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`${PWD_COMMAND}`; \
+ ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+ --host_alias=${host_alias} \
+ --mode=maint $${srcdir} $${builddir})
+
+doxygen-man:
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`${PWD_COMMAND}`; \
+ ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+ --host_alias=${host_alias} \
+ --mode=man $${srcdir} $${builddir})
+
+.PHONY: doxygen doxygen-maint doxygen-man
+
+# Handy forwarding targets.
+check-%:
+ cd testsuite && $(MAKE) $@
# Multilib support.
MAKEOVERRIDES=
-# Multilib variables.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-# Multilib Makefile bits.
-.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
- maintainer-clean-multi
-
-all-am: all-multi
-install-am: install-multi
-mostlyclean-am: mostlyclean-multi
-clean-am: clean-multi
-distclean-am: distclean-multi
-maintainer-clean-am: maintainer-clean-multi
-
-all-multi:
- $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
-install-multi:
- $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
-mostlyclean-multi:
- $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
-clean-multi:
- $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
-distclean-multi:
- $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
-maintainer-clean-multi:
- $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
-
# All the machinations with string instantiations messes up the
# automake-generated TAGS rule. Make a simple one here.
TAGS: tags-recursive $(LISP)
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
- "EXPECT=$(EXPECT)" \
- "RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"includedir=$(includedir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
+ "gxx_include_dir=$(gxx_include_dir)" \
"AR=$(AR)" \
"AS=$(AS)" \
- "CC=$(CC)" \
- "CXX=$(CXX)" \
"LD=$(LD)" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
- "PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"NM=$(NM)" \
"NM_FOR_BUILD=$(NM_FOR_BUILD)" \
"DESTDIR=$(DESTDIR)" \
"WERROR=$(WERROR)"
+# Subdir rules rely on $(FLAGS_TO_PASS)
+FLAGS_TO_PASS = $(AM_MAKEFLAGS)
+# Installation of distribution html documentation not yet supported
+# TODO: Write custom install-html rule.
+.PHONY: install-html install-pdf
+install-html:
-
-
-
-
-
-
-
+# No install-pdf support in automake yet
+install-pdf: