#
# os_include_dir OS-specific directory, defaults to os/generic.
#
-# c_model the "C" header model, defaults to c_std.
+# c_model the "C" header model, defaults to c_global.
#
# c_compatibility if "C" compatibility headers are necessary,
# defaults to no.
# atomic_word_dir location of atomic_word.h
# defaults to generic.
#
+# atomic_flags extra flags to pass to use atomic instructions
+# defaults to nothing.
+#
+# cpu_defines_dir location of cpu_defines.h
+# defaults to generic.
+#
+#
+# error_constants_dir location of error_constants.h
+# defaults to os/generic.
+#
# It possibly modifies the following variables:
#
# OPT_LDFLAGS extra flags to pass when linking the library, of
# Try to guess a default cpu_include_dir based on the name of the CPU. We
# cannot do this for os_include_dir; there are too many portable operating
# systems out there. :-)
-c_model=c_std
+c_model=c_global
c_compatibility=no
atomic_word_dir=cpu/generic
+atomic_flags=""
+atomicity_dir="cpu/generic"
+cpu_defines_dir="cpu/generic"
+try_cpu=generic
+abi_tweaks_dir="cpu/generic"
+error_constants_dir="os/generic"
# HOST-SPECIFIC OVERRIDES
# Set any CPU-dependent bits.
-# Here we override defaults and catch more general cases due to naming
-# conventions (e.g., chip_name* to catch all variants).
+# Provide a way to funnel exotic flavors and prefixed/postfixed chip
+# variants into the established source config/cpu/* sub-directories.
# THIS TABLE IS SORTED. KEEP IT THAT WAY.
case "${host_cpu}" in
alpha*)
try_cpu=alpha
;;
- arm* | xscale | ep9312)
+ arm*)
try_cpu=arm
;;
+ crisv32)
+ try_cpu=cris
+ ;;
i[567]86 | x86_64)
try_cpu=i486
;;
hppa*)
try_cpu=hppa
;;
- mips*)
- # NB: cpu/mips/atomicity.h needs MIPS II or above.
- # Of course, there is no sane way to test for this, no ABI macro,
- # and no consistent host_cpu name differentiation. Therefore, only
- # use it where it is known to be safe, ie it runs linux (see below).
+ mep*)
+ EXTRA_CXX_FLAGS=-mm
try_cpu=generic
;;
- m680[246]0)
- try_cpu=m68k
+ mips*)
+ try_cpu=mips
;;
powerpc* | rs6000)
try_cpu=powerpc
;;
- s390x)
- try_cpu=s390
- ;;
sparc* | ultrasparc)
try_cpu=sparc
;;
*)
if test -d ${glibcxx_srcdir}/config/cpu/${host_cpu}; then
try_cpu=${host_cpu}
- else
- try_cpu=generic
fi
+esac
+
+
+# Now look for the file(s) usually tied to a CPU model, and make
+# default choices for those if they haven't been explicitly set
+# already.
+cpu_include_dir=cpu/${try_cpu}
+
+
+# Set specific CPU overrides for cpu_defines_dir. Most can just use generic.
+# THIS TABLE IS SORTED. KEEP IT THAT WAY.
+case "${host_cpu}" in
+ powerpc* | rs6000)
+ cpu_defines_dir=cpu/powerpc
;;
esac
-# Set specific CPU overrides for atomic_word_dir. Most can just use generic.
+
+# Set specific CPU overrides for atomic_word_dir and atomic_flags.
+# Most can just use generic.
# THIS TABLE IS SORTED. KEEP IT THAT WAY.
case "${host_cpu}" in
+ alpha*)
+ atomic_word_dir=cpu/alpha
+ ;;
cris*)
atomic_word_dir=cpu/cris
;;
+ ia64)
+ atomic_word_dir=cpu/ia64
+ ;;
+ i[4567]86 | x86_64)
+ atomic_flags="-march=native"
+ ;;
+ powerpc* | rs6000)
+ atomic_word_dir=cpu/powerpc
+ ;;
sparc* | ultrasparc)
atomic_word_dir=cpu/sparc
+ atomic_flags="-mcpu=v9"
;;
esac
-# Now look for the file(s) usually tied to a CPU model, and make
-# default choices for those if they haven't been explicitly set
-# already.
-cpu_include_dir=cpu/${try_cpu}
-abi_baseline_pair=${try_cpu}-${host_os}
-unset try_cpu
+# Set specific CPU overrides for atomicity_dir.
+# This can be over-ridden in GLIBCXX_ENABLE_ATOMIC_BUILTINS.
+# THIS TABLE IS SORTED. KEEP IT THAT WAY.
if test -f ${glibcxx_srcdir}/config/${cpu_include_dir}/atomicity.h ; then
atomicity_dir=$cpu_include_dir
-else
- atomicity_dir="cpu/generic"
fi
+
if test -f ${glibcxx_srcdir}/config/${cpu_include_dir}/cxxabi_tweaks.h ; then
abi_tweaks_dir=$cpu_include_dir
-else
- abi_tweaks_dir="cpu/generic"
fi
+
# Set any OS-dependent bits.
# Set the os_include_dir.
+# Set the error_costants_dir.
# Set c_model, c_compatibility here.
# If atomic ops and/or numeric limits are OS-specific rather than
# CPU-specifc, set those here too.
# explicitly duplicate the directory for 4.[<3].
os_include_dir="os/aix"
atomicity_dir="os/aix"
+ atomic_word_dir="os/aix"
OPT_LDFLAGS="-Wl,-G"
;;
aix4.*)
os_include_dir="os/generic"
atomicity_dir="os/aix"
+ atomic_word_dir="os/aix"
;;
aix*)
os_include_dir="os/generic"
cygwin*)
os_include_dir="os/newlib"
;;
- darwin*)
+ darwin | darwin[1-7] | darwin[1-7].*)
# On Darwin, performance is improved if libstdc++ is single-module.
- # Up to at least 10.3.5, -flat_namespace is required for proper
+ # Up to at least 10.3.7, -flat_namespace is required for proper
# treatment of coalesced symbols.
OPT_LDFLAGS="${OPT_LDFLAGS} -Wl,-single_module -Wl,-flat_namespace"
os_include_dir="os/bsd/darwin"
;;
+ darwin[89] | darwin[89].* | darwin[1-9][0-9]* )
+ # On Darwin, performance is improved if libstdc++ is single-module,
+ # and on 8+ compatibility is better if not -flat_namespace.
+ OPT_LDFLAGS="${OPT_LDFLAGS} -Wl,-single_module"
+ case "${host_cpu}" in
+ i[34567]86 | x86_64)
+ OPTIMIZE_CXXFLAGS="${OPTIMIZE_CXXFLAGS} -fvisibility-inlines-hidden"
+ ;;
+ esac
+ os_include_dir="os/bsd/darwin"
+ ;;
*djgpp*) # leading * picks up "msdosdjgpp"
os_include_dir="os/djgpp"
;;
os_include_dir="os/bsd/freebsd"
;;
gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
- os_include_dir="os/gnu-linux"
+ if [ "$uclibc" = "yes" ]; then
+ os_include_dir="os/uclibc"
+ else
+ os_include_dir="os/gnu-linux"
+ fi
;;
hpux*)
os_include_dir="os/hpux"
;;
mingw32*)
os_include_dir="os/mingw32"
+ error_constants_dir="os/mingw32"
;;
netbsd*)
os_include_dir="os/bsd/netbsd"
echo "Please specify the full version of Solaris, ie. solaris2.9 " 1>&2
exit 1
;;
- solaris2.5 | solaris2.5.[0-9])
- os_include_dir="os/solaris/solaris2.5"
- ;;
- solaris2.6)
- os_include_dir="os/solaris/solaris2.6"
- ;;
solaris2.[789] | solaris2.1[0-9])
os_include_dir="os/solaris/solaris2.7"
;;
vxworks)
os_include_dir="os/vxworks"
;;
- windiss*)
- os_include_dir="os/windiss"
- ;;
*)
os_include_dir="os/generic"
;;
# Set any OS-dependent and CPU-dependent bits.
# THIS TABLE IS SORTED. KEEP IT THAT WAY.
case "${host}" in
- alpha*-*-freebsd5*)
- abi_baseline_pair="alpha-freebsd5"
- ;;
- arm*-*-linux*)
- abi_baseline_pair="arm-linux-gnu"
- ;;
- i*86-*-freebsd4*)
- abi_baseline_pair="i386-freebsd4"
- ;;
- i*86-*-freebsd5*)
- abi_baseline_pair="i386-freebsd5"
- ;;
- mips*-*-linux*)
- atomicity_dir="cpu/mips"
- abi_baseline_pair="mips-linux-gnu"
- cpu_include_dir="cpu/mips"
- ;;
- s390-*-linux*)
- abi_baseline_pair="s390-linux-gnu"
- ;;
- s390x-*-linux*)
- abi_baseline_pair="s390x-linux-gnu"
- ;;
- sparc*-*-freebsd5*)
- abi_baseline_pair="sparc-freebsd5"
- ;;
- x86_64-*-linux*)
- abi_baseline_pair="x86_64-linux-gnu"
+ *-*-linux*)
+ case "${host_cpu}" in
+ i[567]86)
+ abi_baseline_pair=i486-linux-gnu
+ ;;
+ mips64*)
+ abi_baseline_pair=mips64-linux-gnu
+ ;;
+ powerpc64)
+ abi_baseline_pair=powerpc64-linux-gnu
+ ;;
+ s390)
+ abi_baseline_pair=s390-linux-gnu
+ ;;
+ s390x)
+ abi_baseline_pair=s390x-linux-gnu
+ ;;
+ x86_64)
+ abi_baseline_pair=x86_64-linux-gnu
+ ;;
+ *)
+ if test -d ${glibcxx_srcdir}/config/abi/post/${try_cpu}-linux-gnu; then
+ abi_baseline_pair=${try_cpu}-linux-gnu
+ fi
+ esac
+ case "${host}" in
+ arm*-*-linux-*eabi)
+ port_specific_symbol_files="\$(srcdir)/../config/os/gnu-linux/arm-eabi-extra.ver"
+ ;;
+ esac
+ ;;
+ powerpc*-*-darwin*)
+ port_specific_symbol_files="\$(srcdir)/../config/os/bsd/darwin/ppc-extra.ver"
;;
esac