-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (VEX_W_3818_P_2_M_0): New.
- (vex_w_table): Add VEX_W_3818_P_2_M_0.
- (mod_table): Use VEX_W_3818_P_2_M_0.
-
-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (vex_w_table): Reformat.
-
-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (VEX_W_382X_P_2_M_0): New.
- (vex_w_table): Add VEX_W_382X_P_2_M_0.
- (mod_table): Use VEX_W_382X_P_2_M_0.
-
-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (vex_w_table): Reformat.
-
-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (USE_VEX_W_TABLE): New.
- (VEX_W_TABLE): Likewise.
- (VEX_W_XXX): Likewise.
- (vex_w_table): Likewise.
- (prefix_table): Use VEX_W_XXX.
- (vex_table): Likewise.
+2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (Bad_Opcode): New.
+ (bad_opcode): Likewise.
+ (dis386): Replace { "(bad)", { XX } } with { Bad_Opcode }.
+ (dis386_twobyte): Likewise.
+ (reg_table): Likewise.
+ (prefix_table): Likewise.
+ (x86_64_table): Likewise.
(vex_len_table): Likewise.
+ (vex_w_table): Likewise.
(mod_table): Likewise.
- (get_valid_dis386): Handle USE_VEX_W_TABLE.
-
- * i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
- isn't used.
- * i386-tbl.h: Regenerated.
-
-2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.h (VEX128): New.
- (VEX256): Likewise.
-
-2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (vex_len_table): Reformat.
-
-2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (MOD_VEX_51): Renamed to ...
- (MOD_VEX_50): This.
- (vex_table): Updated.
+ (rm_table): Likewise.
+ (float_reg): Likewise.
+ (reg_table): Remove trailing "(bad)" entries.
+ (prefix_table): Likewise.
+ (x86_64_table): Likewise.
+ (vex_len_table): Likewise.
+ (vex_w_table): Likewise.
(mod_table): Likewise.
+ (rm_table): Likewise.
+ (get_valid_dis386): Handle bytemode 0.
-2009-12-14 Nick Clifton <nickc@redhat.com>
-
- PR binutils/10924
- * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
- results in unpredictable behaviour.
- (print_insn_arm): Handle %R.
-
-2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
- prefix.
- (print_insn): Don't set vex.w here.
-
-2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (print_insn): Set vex.w to 0.
-
-2009-12-11 Quentin Neill <quentin.neill@amd.com>
+2010-01-23 H.J. Lu <hongjiu.lu@intel.com>
- * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
- to avoid fetching ahead for the immediate bytes when OP_E_memory
- has already been called. Fix indentation.
+ * i386-opc.h (VEXScalar): New.
-2009-12-11 Nick Clifton <nickc@redhat.com>
-
- * Makefile.in: Regenerate.
- * configure: Regenerate.
- * arm-dis.c: Fix shadowed variable warnings.
- * cgen-opc.c: Likewise.
- * cr16-dis.c: Likewise.
- * crx-dis.c: Likewise.
- * d30v-dis.c: Likewise.
- * fr30-dis.c: Likewise.
- * frv-opc.c: Likewise.
- * h8500-dis.c: Likewise.
- * i386-dis.c: Likewise.
- * i960-dis.c: Likewise.
- * ia64-gen.c: Likewise.
- * ia64-opc.c: Likewise.
- * m32c-asm.c: Likewise.
- * m32c-dis.c: Likewise.
- * m68k-dis.c: Likewise.
- * maxq-dis.c: Likewise.
- * mcore-dis.c: Likewise.
- * mep-asm.c: Likewise.
- * microblaze-dis.c: Likewise.
- * mmix-dis.c: Likewise.
- * ns32k-dis.c: Likewise.
- * or32-opc.c: Likewise.
- * s390-dis.c: Likewise.
- * sh64-dis.c: Likewise.
- * spu-dis.c: Likewise.
- * tic30-dis.c: Likewise.
-
-2009-12-09 Nick Clifton <nickc@redhat.com>
-
- PR 10924
- * arm-dis.c (print_insn_arm): Mark insns that use the PC in
- post-indexed addressing as unpredictable.
-
-2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (FXSAVE_Fixup): New.
- (FXSAVE): Likewise.
- (mod_table): Use FXSAVE on fxsave and fxrstor.
-
- * i386-opc.tbl: Add fxsave64 and fxrstor64.
+ * i386-opc.tbl: Replace "Vex" with "Vex=3" on AVX scalar
+ instructions.
* i386-tbl.h: Regenerated.
-2009-12-02 Nick Clifton <nickc@redhat.com>
- Richard Earnshaw <rearnsha@arm.com>
-
- PR gas/11013
- * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
- and QDSUB.
-
-2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
-
- PR gas/11030
- * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
- Coldfire ISA A+.
-
-2009-11-17 Quentin Neill <quentin.neill@amd.com>
- Sebastian Pop <sebastian.pop@amd.com>
-
- * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
- decoding the second source operand from the immediate byte.
- (OP_EX_VexW): Pass an extra integer to identify the second
- and third source arguments.
-
-2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.tbl: Add IsLockable to cmpxch16b.
- * i386-tbl.h: Regenerated.
-
-2009-11-19 Nick Clifton <nickc@redhat.com>
-
- PR binutils/10924
- * arm-dis.c (print_insn_arm): Do not print an offset of zero when
- decoding Immediaate Offset addressing.
-
-2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
-
- PR binutils/10973
- * i386-dis.c (get_vex_imm8): Do not increment codep.
- Avoid incrementing bytes_before_imm when OP_E_memory
- has already forwarded the codep pointer.
- (OP_EX_VexW): Increment codep to skip mod/rm byte.
-
-2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
-
- * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
- (VEX_LEN_XOP_08_A1): Removed.
- (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
- VEX_LEN_XOP_08_A1.
- (vex_len_table): Same.
- * i386-gen.c (CPU_CVT16_FLAGS): Removed.
- (cpu_flags): Remove field for CpuCVT16.
- * i386-opc.h (CpuCVT16): Removed.
- (i386_cpu_flags): Remove bitfield cpucvt16.
- (i386-opc.tbl): Remove CVT16 instructions.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Regenerated.
-
-2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
- Quentin Neill <quentin.neill@amd.com>
-
- * i386-dis.c (OP_Vex_2src_1): New.
- (OP_Vex_2src_2): New.
- (Vex_2src_1): New.
- (Vex_2src_2): New.
- (XOP_08): Added.
- (VEX_LEN_XOP_08_A0): Added.
- (VEX_LEN_XOP_08_A1): Added.
- (VEX_LEN_XOP_09_80): Added.
- (VEX_LEN_XOP_09_81): Added.
- (xop_table): Added an entry for XOP_08. Handle xop instructions.
- (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
- VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
- (get_valid_dis386): Handle XOP_08.
- (OP_Vex_2src): New.
- * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
- (cpu_flags): Add CpuXOP and CpuCVT16.
- (opcode_modifiers): Add XOP08, Vex2Sources.
- * i386-opc.h (CpuXOP): Added.
- (CpuCVT16): Added.
- (i386_cpu_flags): Add cpuxop and cpucvt16.
- (XOP08): Added.
- (Vex2Sources): Added.
- (i386_opcode_modifier): Add xop08, vex2sources.
- * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Regenerated.
-
-2009-11-17 Nick Clifton <nickc@redhat.com>
-
- PR binutils/10924
- * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
- instruction variants. Add pattern for MRS variant that was being
- confused with CMP.
- (arm_decode_shift): Place error message in a comment.
- (print_insn_arm): Note that writing back to the PC is
- unpredictable.
- Only print 'p' variants of cmp/cmn/teq/tst instructions if
- decoding for pre-V6 architectures.
-
-2009-11-17 Edward Nevill <edward.nevill@arm.com>
-
- * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
-
-2009-11-14 Doug Evans <dje@sebabeach.org>
-
- * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
- ../cgen/cpu.
- * Makefile.in: Regenerate.
-
-2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (OP_E_extended): Removed.
-
-2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (print_insn): Check rex_ignored.
-
-2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (ckprefix): Updated to return 0 if number of
- prefixes > 14 and record the last position for each prefix.
- (lock_prefix): Removed.
- (data_prefix): Likewise.
- (addr_prefix): Likewise.
- (repz_prefix): Likewise.
- (repnz_prefix): Likewise.
- (last_lock_prefix): New.
- (last_repz_prefix): Likewise.
- (last_repnz_prefix): Likewise.
- (last_data_prefix): Likewise.
- (last_addr_prefix): Likewise.
- (last_rex_prefix): Likewise.
- (last_seg_prefix): Likewise.
- (MAX_CODE_LENGTH): Likewise.
- (ADDR16_PREFIX): Likewise.
- (ADDR32_PREFIX): Likewise.
- (DATA16_PREFIX): Likewise.
- (DATA32_PREFIX): Likewise.
- (REP_PREFIX): Likewise.
- (seg_prefix): Likewise.
- (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
- (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
- DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
- (get_valid_dis386): Updated.
- (OP_C): Likewise.
- (OP_Monitor): Likewise.
- (REP_Fixup): Likewise.
- (print_insn): Display all prefixes.
- (putop): Set PREFIX_DATA on used_prefixes only if it is used.
- (intel_operand_size): Likewise.
- (OP_E_register): Likewise.
- (OP_G): Likewise.
- (OP_REG): Likewise.
- (OP_IMREG): Likewise.
- (OP_I): Likewise.
- (OP_I64): Likewise.
- (OP_sI): Likewise.
- (CRC32_Fixup): Likewise.
- (MOVBE_Fixup): Likewise.
- (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
- in 16bit mode.
- (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
- used_prefixes only if it is used.
-
-2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
- or, sbb, sub, xor and xchg with register only operands.
- * i386-tbl.h: Regenerated.
-
-2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (opcode_modifiers): Add IsLockable.
-
- * i386-opc.h (IsLockable): New.
- (i386_opcode_modifier): Add islockable.
-
- * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
- bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
- xor, xadd and xchg.
- * i386-tbl.h: Regenerated.
-
-2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
-
- * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
- generic coprocessor instructions for FPA loads and stores.
- (print_insn_coprocessor): Remove %C support. Display address for
- PC-relative offsets in %A.
-
-2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (all_prefixes): New.
- (ckprefix): Set all_prefixes.
- (print_insn): Print all_prefixes instead of lock_prefix,
- repz_prefix, repnz_prefix, addr_prefix and data_prefix.
-
-2009-11-11 Nick Clifton <nickc@redhat.com>
-
- PR binutils/10924
- * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
- (print_insn_arm): Extend %s format control code to check for
- unpredictable addressing modes. Add support for %S format control
- code which suppresses this check.
- (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
- (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
- PRE_BIT_SET): New macros.
- (print_insn_coprocessor): Use the new macros instead of magic
- constants.
- (print_arm_address): Likewise.
- (pirnt_insn_arm): Likewise.
- (print_insn_thumb32): Likewise.
-
-2009-11-11 Nick Clifton <nickc@redhat.com>
-
- * po/id.po: Updated Indonesian translation.
-
-2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
-
- * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
-
-2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
-
- * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
- reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
- B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
- the xop_table.
- (get_valid_dis386): Removed unused condition (from cut/n/paste) for
- XOP instructions.
-
-2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
- Quentin Neill <quentin.neill@amd.com>
-
- * opcodes/i386-dis.c (OP_LWPCB_E): New.
- (OP_LWP_E): New.
- (OP_LWP_I): New.
- (USE_XOP_8F_TABLE): New.
- (XOP_8F_TABLE): New.
- (REG_XOP_LWPCB): New.
- (REG_XOP_LWP): New.
- (XOP_09): New.
- (XOP_0A): New.
- (reg_table): Redirect REG_8F to XOP_8F_TABLE.
- Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
- (xop_table): New.
- (get_valid_dis386): Handle USE_XOP_8F_TABLE.
- Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
- to access to the vex_table.
- (OP_LWPCB_E): New.
- (OP_LWP_E): New.
- (OP_LWP_I): New.
- * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
- (cpu_flags): Add CpuLWP.
- (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
- * opcodes/i386-opc.h (CpuLWP): New.
- (i386_cpu_flags): Add bit cpulwp.
- (VexLWP): New.
- (XOP09): New.
- (XOP0A): New.
- (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
- * opcodes/i386-opc.tbl (llwpcb): Added.
- (lwpval): Added.
- (lwpins): Added.
-
-2009-11-04 DJ Delorie <dj@redhat.com>
-
- * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
- (mvtcp, mvfcp, opecp): Remove.
- * rx-decode.c: Regenerate.
- * rx-dis.c (cpen): Remove.
-
-2009-11-03 Doug Evans <dje@sebabeach.org>
-
- * m32c-desc.c: Regenerate.
- * mep-desc.c: Regenerate.
-
-2009-11-02 Paul Brook <paul@codesourcery.com>
-
- * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
- Add VFPv4 instructions.
-
-2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
-
- * i386-dis.c (OP_VEX_FMA): Removed.
- (VexFMA): Removed.
- (Vex128FMA): Removed.
- (prefix_table): First source operand of FMA4 insns is decoded
- with Vex not with VexFMA.
- (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
- when vex.w is set. Third source operand is decoded with
-
-2009-10-27 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2009-10-23 Doug Evans <dje@sebabeach.org>
-
- * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
- * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
- * cgen-bitset.c: Update.
- * fr30-desc.h: Regenerate.
- * frv-desc.h: Regenerate.
- * ip2k-desc.h: Regenerate.
- * iq2000-desc.h: Regenerate.
- * lm32-desc.h: Regenerate.
- * m32c-desc.h: Regenerate.
- * m32c-opc.h: Regenerate.
- * m32r-desc.h: Regenerate.
- * mep-desc.h: Regenerate.
- * mt-desc.h: Regenerate.
- * openrisc-desc.h: Regenerate.
- * xc16x-desc.h: Regenerate.
- * xstormy16-desc.h: Regenerate.
-
-2009-10-22 DJ Delorie <dj@redhat.com>
-
- * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
- * rx-decode.c: Regenerated.
-
-2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/10775
- * i386-dis.c: Document LB, LS and LV macros.
- (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
- with the 64-bit displacement or immediate operand.
- (putop): Handle LB, LS and LV macros.
+2010-01-21 H.J. Lu <hongjiu.lu@intel.com>
-2009-10-18 Doug Evans <dje@sebabeach.org>
+ * i386-dis.c (mod_table): Use FXSAVE on xsave and xrstor.
- * lm32-opinst.c: Regenerate.
- * m32c-desc.c: Regenerate.
- * m32r-opinst.c: Regenerate.
- * openrisc-ibld.c: Regenerate.
- * xc16x-desc.c: Regenerate.
- * xc16x-desc.h: Regenerate.
-
-2009-10-17 Doug Evans <dje@sebabeach.org>
-
- * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
- (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
- sorted alphabetically.
- (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
- stamp-* rules are sorted alphabetically.
- * Makefile.in: Regenerate.
-
-2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.h: Use enum instead of nested macros.
-
-2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c: Simplify enums.
-
-2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
- Ineiev <ineiev@gmail.com>
-
- PR binutils/10767
- * i386-dis.c: Use enum instead of nested macros.
-
-2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (MAX_BYTEMODE): Removed.
-
-2009-10-14 Tomas Hurka <tom@hukatronic.cz>
-
- PR 969
- * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
-
-2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
- and vex_w_done.
-
-2009-10-07 Michael Eager <eager@eagercon.com>
-
- * microblaze-dis.c: Add include for microblaze-dis.h,
- eliminate local extern decls.
- * microblaze-dis.h: New.
-
-2009-10-06 Nick Clifton <nickc@redhat.com>
-
- * po/fi.po: Updated Finnish translation.
-
-2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
-
- * opc2c.c: Include "libiberty.h" and <errno.h>.
- (orig_filename): Constify.
- (dump_lines): Fix line number directive.
- (main): Set orig_filename to basename of input file. Use
- xstrerror.
-
- * Makefile.am (rx-dis.lo): Remove explicit dependencies.
- ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
- instead of $(EXEEXT).
- (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
- $(LINK_FOR_BUILD). Link with libiberty.
- (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
- (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
- * Makefile.in: Regenerated.
- * rx-decode.c: Regenerated.
-
-2009-10-03 Paul Reed <paulreed@paddedcell.com>
-
- * arm-dis.c (print_insn): Check symtab_size not *symtab.
-
-2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
+ * i386-opc.tbl: Add xsave64 and xrstor64.
* i386-tbl.h: Regenerated.
-2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (ppc_opts): Add "476" entry.
- * ppc-opc.c (PPC476): Define.
- (powerpc_opcodes): Update mnemonics where required for 476.
+2010-01-20 Nick Clifton <nickc@redhat.com>
-2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
+ PR 11170
+ * arm-dis.c (print_arm_address): Do not ignore negative bit in PC
+ based post-indexed addressing.
- * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
- * ppc-dis.c (ppc_opts): Likewise.
- Rename "ppca2" to "a2".
+2010-01-15 Sebastian Pop <sebastian.pop@amd.com>
-2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
-
-2009-09-29 DJ Delorie <dj@redhat.com>
-
- * Makefile.am: Add RX files.
- * configure.in: Add support for RX target.
- * disassemble.c: Likewise.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
- * opc2c.c: New file.
- * rx-decode.c: New file.
- * rx-decode.opc: New file.
- * rx-dis.c: New file.
-
-2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
- "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
-
-2009-09-25 Michael Eager <eager@eagercon.com>
-
- * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
- microblaze_decode_insn): Add declarations.
- (get_delay_slots_microblaze): Remove.
-
-2009-09-25 Martin Thuresson <martint@google.com>
-
- Update sources to make arc and arm targets compile cleanly with
- -Wc++-compat:
- * arc-dis.c Fix casts.
- * arc-ext.c: Add casts.
- * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
- enum.
-
-2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (opcode_modifiers): Remove Vex256.
- (set_bitfield): Handle XXX=V.
-
- * i386-opc.h (Vex): Update comments.
- (Vex256): Removed.
- (VexNDS): Updated.
- (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
-
- * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
+ * i386-opc.tbl: Support all the possible aliases for VPCOM* insns.
* i386-tbl.h: Regenerated.
-2009-09-23 Nick Clifton <nickc@redhat.com>
-
- * po/fr.po: Updated French translation.
-
-2009-09-21 Ben Elliston <bje@au.ibm.com>
- Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (ppc_opts): Add "ppca2" entry.
- * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
- eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
- icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
- ici mnemonics.
- (ERAT_T): New operand.
- (XWC_MASK): New mask.
- (XOPL2): New macro.
- (PPCA2): Define.
-
-2009-09-18 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
- * po/vi.po: Updated Vietnamese translation.
-
-2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
- disp == -disp.
-
-2009-09-14 Nick Clifton <nickc@redhat.com>
-
- * po/nl.po: Updated Dutch translation.
-
-2009-09-11 Nick Clifton <nickc@redhat.com>
-
- * po/opcodes.pot: Updated by the Translation project.
-
-2009-09-11 Martin Thuresson <martint@google.com>
-
- Updated sources to compile cleanly with -Wc++-compat:
- * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
- * ldcref.c: Add casts.
- * ldctor.c: Add casts.
- * ldexp.c
- * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
- * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
- * ldlang.h (enum statement_enum): Move to top level.
- * ldmain.c: Add casts.
- * ldwrite.c: Add casts.
- * lexsup.c: Add casts. (enum control_enum): Move to top level.
- * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
-
-2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * s390-dis.c (print_insn_s390): Avoid 'long long'.
-
-2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
- (print_insn_s390): Signextend and shift pcrel operands before printing.
-
-2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
- VEX_LEN_AE_R_X_M_0 in comments.
-
-2009-09-08 DJ Delorie <dj@redhat.com>
-
- * mep-opc.c: Regenerate.
-
-2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
-
- * z8kgen.c (struct op): Replace unused flavor with id.
- (opt): Remove extra xorb entry.
- (func): Use id field as fallback.
- (sub): Return new string, caller changed.
- (internal): Allocate end marker. Assign unique id before sorting.
- (gas): Likewise. Fix loop end condition.
- * z8k-opc.h: Regenerate.
-
-2009-09-08 Alan Modra <amodra@bigpond.net.au>
-
- * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
-
-2009-09-07 Alan Modra <amodra@bigpond.net.au>
-
- * z8kgen.c (func): Fix thinko last patch.
-
-2009-09-07 Alan Modra <amodra@bigpond.net.au>
-
- * z8kgen.c (func): Stabilize qsort of identically named entries.
- * z8k-opc.h: Regenerate.
-
-2009-09-07 Tristan Gingold <gingold@adacore.com>
-
- * po/opcodes.pot: Regenerate.
-
-2009-09-07 Alan Modra <amodra@bigpond.net.au>
-
- * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
- * configure: Regenerate.
- * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
- (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
- (i386-gen, ia64-gen, z8kgen): ..here.
- * Makefile.in: Regenerate.
-
-2009-09-07 Tristan Gingold <gingold@adacore.com>
-
- * z8k-opc.h: Regenerate.
-
-2009-09-05 Martin Thuresson <martin@mtme.org>
-
- * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
- * m88k-dis.c (m88kdis): Rename variable class to in_class.
- * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
- Rename argument class to symbol_class.
-
-2009-09-04 Jie Zhang <jie.zhang@analog.com>
-
- * bfin-dis.c (decode_pseudodbg_assert_0): Change according
- to the new encoding of DBGA, DBGAH, and DBGAL.
- (_print_insn_bfin): Likewise.
-
-2009-09-03 Jie Zhang <jie.zhang@analog.com>
-
- * bfin-dis.c (_print_insn_bfin): Don't declare.
- (print_insn_bfin): Don't declare.
- (dregs_pair): Remove.
- (ignore_bits): Remove.
- (ccstat): Remove.
-
-2009-09-03 Jie Zhang <jie.zhang@analog.com>
-
- * bfin-dis.c (IS_DREG): Define.
- (IS_PREG): Define.
- (IS_AREG): Define.
- (IS_GENREG): Define.
- (IS_DAGREG): Define.
- (IS_SYSREG): Define.
- (decode_REGMV_0): Check illegal register move instructions.
-
-2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
-
- * Makefile.am (BUILD_LIBINTL): New variable.
- (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
- (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
- (z8kgen$(EXEEXT_FOR_BUILD)): And here.
- * Makefile.in: Regenerate.
-
-2009-09-01 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-opc.c: Regenerate.
-
-2009-09-01 Tristan Gingold <gingold@adacore.com>
-
- * makefile.vms: Ported to Itanium VMS. Remove useless targets and
- dependencies. Remove unused FORMAT variable.
- * configure.com: New file to create build.com DCL script for
- Itanium VMS or Alpha VMS.
-
-2009-08-29 Martin Thuresson <martin@mtme.org>
-
- * cris-dis.c (bytes_to_skip): Update code to use new name.
- * i386-dis.c (putop): Update code to use new name.
- * i386-gen.c (process_i386_opcodes): Update code to use
- new name.
- * i386-opc.h (struct template): Rename struct template to
- insn_template. Update code accordingly.
- * i386-tbl.h (i386_optab): Update type to use new name.
- * ia64-dis.c (print_insn_ia64): Rename variable template
- to template_val.
- * tic30-dis.c (struct instruction, get_tic30_instruction):
- Update code to use new name.
- * tic54x-dis.c (has_lkaddr, get_insn_size)
- (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
- Update code to use new name.
- * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
- Update type to new name.
- * z8kgen.c (internal, gas): Rename variable new to new_op.
-
-2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
- Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
- (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
- CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
- * Makefile.in: Regenerated.
-
-2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
- [INSTALL_LIBBFD]: ... here, ...
- [INSTALL_LIBBFD]: ... and empty overrides here.
- [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
- [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
-
-2009-08-26 Philippe De Muyter <phdm@macqel.be>
-
- * m68k-dis.c (print_insn_arg): Add movecr register names for
- coldfire v4e families.
-
-2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * Makefile.am (SUBDIRS): Build '.' before 'po'.
- (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
- (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
- (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
- using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
- (i386-gen.o): New rule.
- ($(srcdir)/i386-init.h): Adjust.
- (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
- (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
- (ia64-gen.o): New rule.
- (ia64_asmtab_deps): New variable.
- ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
- (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
- (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
- likewise.
- (s390-opc.tab): Adjust.
- (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
- rules.
- (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
- * Makefile.in: Regenerate.
- * z8kgen.c (gas): Avoid '/*' in comment.
- * z8k-opc.h (func): Regenerate.
-
-2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
- from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
- i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
- ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
- msp430-dis.c added.
- (LIBOPCODES_CFILES): New variable, adding to
- TARGET_LIBOPCODES_CFILES also non-target library sources.
- (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
- files.
- (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
- (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.h (VexVVVV): Replace VEX.DNS with VEX.NDS in
+ comments.
+
+2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (names_mm): New.
+ (intel_names_mm): Likewise.
+ (att_names_mm): Likewise.
+ (names_xmm): Likewise.
+ (intel_names_xmm): Likewise.
+ (att_names_xmm): Likewise.
+ (names_ymm): Likewise.
+ (intel_names_ymm): Likewise.
+ (att_names_ymm): Likewise.
+ (print_insn): Set names_mm, names_xmm and names_ymm.
+ (OP_MMX): Use names_mm, names_xmm and names_ymm.
+ (OP_XMM): Likewise.
+ (OP_EM): Likewise.
+ (OP_EMC): Likewise.
+ (OP_MXC): Likewise.
+ (OP_EX): Likewise.
+ (XMM_Fixup): Likewise.
+ (OP_VEX): Likewise.
+ (OP_EX_VexReg): Likewise.
+ (OP_Vex_2src): Likewise.
+ (OP_Vex_2src_1): Likewise.
+ (OP_Vex_2src_2): Likewise.
+ (OP_REG_VexI4): Likewise.
- * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
- [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
- [INSTALL_LIBBFD] (bfdinclude_DATA): New.
- [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
- [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
- is built shared even if it is not to be installed.
- (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
- (install_libopcodes, uninstall_libopcodes): Remove.
- (AM_CPPFLAGS): Renamed from ...
- (INCLUDES): ... this.
- * Makefile.in: Regenerate.
+2010-01-13 H.J. Lu <hongjiu.lu@intel.com>
- * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
- 1.11, foreign, no-dist.
- (MKDEP, m32c_opc_h): Remove variables.
- (disassemble.lo): Rewrite using automake-style dependency
- tracking rules; only list the dependency upon the primary source
- file, but no included headers.
- (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
- (i386-gen.o, ia64-gen.o): Remove dependency statements.
- (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
- ensure all dependency fragments are included in the Makefile.
- (s390-opc.lo): Depend on s390-opc.tab.
- (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
- (mkdep section): Remove.
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
+ * i386-dis.c (print_insn): Update comments.
- * Makefile.am (install-pdf, install-html): Remove.
- * Makefile.in: Regenerate.
+2010-01-12 H.J. Lu <hongjiu.lu@intel.com>
- * Makefile.in: Regenerate.
- * aclocal.m4: Likewise.
- * config.in: Likewise.
- * configure: Likewise.
+ * i386-dis.c (rex_original): Removed.
+ (ckprefix): Remove rex_original.
+ (print_insn): Update comments.
-2009-08-06 Michael Eager <eager@eagercon.com>
+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
- * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
- CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
* Makefile.in: Regenerate.
- * configure.in: Add bfd_microblaze_arch target.
* configure: Regenerate.
- * disassemble.c: Define ARCH_microblaze, return
- print_insn_microblaze().
- * microblaze-dis.c: New MicroBlaze disassembler.
- * microblaze-opc.h: New MicroBlaze opcode definitions.
- * microblaze-opcm.h: New MicroBlaze opcode types.
-2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
+2010-01-07 Doug Evans <dje@sebabeach.org>
- * configure.in: Handle bfd_l1om_arch.
- * disassemble.c (disassembler): Likewise.
+ * cgen-ibld.in (insert_normal, extract_normal): Minor cleanup.
+ * fr30-ibld.c, * frv-ibld.c, * ip2k-ibld.c, * iq2000-ibld.c,
+ * lm32-ibld.c, * m32c-ibld.c, * m32r-ibld.c, * mep-ibld.c,
+ * mt-ibld.c, * openrisc-ibld.c, * xc16x-ibld.c,
+ * xstormy16-ibld.c: Regenerate.
- * configure: Regenerated.
+2010-01-06 Quentin Neill <quentin.neill@amd.com>
- * i386-dis.c (print_insn): Handle bfd_mach_l1om and
- bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
-
- * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
- Add CPU_L1OM_FLAGS.
- (cpu_flags): Add CpuL1OM.
- (set_bitfield): Take an argument to set the value field.
- (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
- (process_i386_opcode_modifier): Updated.
- (process_i386_operand_type): Likewise.
+ * i386-gen.c (cpu_flag_init): Add new CPU_AMDFAM15_FLAGS.
* i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
- * i386-opc.h (CpuL1OM): New.
- (CpuXsave): Updated.
- (i386_cpu_flags): Add cpul1om.
-
-2009-07-24 Jan Beulich <jbeulich@novell.com>
-
- * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
- frstpm.
- * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
- (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
- (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
- * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
- Define.
- (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
- and cpufisttp.
- * i386-opc.tbl: Qualify floating point instructions by their
- respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
- and fsincos to be avilable only on 387. Fix fstsw ax to be
- available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
- and frstpm.
- * i386-init.h, i386-tbl.h: Regenerate.
-
-2009-07-20 Nick Clifton <nickc@redhat.com>
- PR 10288
- * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
- offset or indexed based addressing mode 3.
-
-2009-07-14 Nick Clifton <nickc@redhat.com>
-
- PR 10288
- * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
- patterns.
- (arm_decode_shift): Catch illegal register based shifts.
- (print_insn_arm): Properly handle negative register r0
- post-indexed addressing.
-
-2009-07-10 Doug Kwan <dougkwan@google.com>
-
- * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
- lower 32 bits of long types to make hexadecimal output consistent
- on both 32-bit and 64-bit hosts.
-
-2009-07-10 Alan Modra <amodra@bigpond.net.au>
-
- * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
- * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
- * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
- * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
- * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
- * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
- * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
- * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
- * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
- * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
- * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
+2010-01-06 Daniel Gutson <dgutson@codesourcery.com>
+
+ * arm-dis.c (print_insn): Fixed search for next symbol and data
+ dumping condition, and the initial mapping symbol state.
+
+2010-01-05 Doug Evans <dje@sebabeach.org>
+
+ * cgen-ibld.in: #include "cgen/basic-modes.h".
+ * fr30-ibld.c, * frv-ibld.c, * ip2k-ibld.c, * iq2000-ibld.c,
+ * lm32-ibld.c, * m32c-ibld.c, * m32r-ibld.c, * mep-ibld.c,
+ * mt-ibld.c, * openrisc-ibld.c, * xc16x-ibld.c,
+ * xstormy16-ibld.c: Regenerate.
+
+2010-01-04 Nick Clifton <nickc@redhat.com>
+
+ PR 11123
+ * arm-dis.c (print_insn_coprocessor): Initialise value.
+
+2010-01-04 Edmar Wienskoski <edmar@freescale.com>
+
+ * ppc-dis.c (ppc_opts): Add entry for "e500mc64".
+
+2010-01-02 Doug Evans <dje@sebabeach.org>
+
+ * cgen-asm.in: Update copyright year.
+ * cgen-dis.in: Update copyright year.
+ * cgen-ibld.in: Update copyright year.
+ * fr30-asm.c, * fr30-desc.c, * fr30-desc.h, * fr30-dis.c,
+ * fr30-ibld.c, * fr30-opc.c, * fr30-opc.h, * frv-asm.c, * frv-desc.c,
+ * frv-desc.h, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * frv-opc.h,
+ * ip2k-asm.c, * ip2k-desc.c, * ip2k-desc.h, * ip2k-dis.c,
+ * ip2k-ibld.c, * ip2k-opc.c, * ip2k-opc.h, * iq2000-asm.c,
+ * iq2000-desc.c, * iq2000-desc.h, * iq2000-dis.c, * iq2000-ibld.c,
+ * iq2000-opc.c, * iq2000-opc.h, * lm32-asm.c, * lm32-desc.c,
+ * lm32-desc.h, * lm32-dis.c, * lm32-ibld.c, * lm32-opc.c, * lm32-opc.h,
+ * lm32-opinst.c, * m32c-asm.c, * m32c-desc.c, * m32c-desc.h,
+ * m32c-dis.c, * m32c-ibld.c, * m32c-opc.c, * m32c-opc.h, * m32r-asm.c,
+ * m32r-desc.c, * m32r-desc.h, * m32r-dis.c, * m32r-ibld.c,
+ * m32r-opc.c, * m32r-opc.h, * m32r-opinst.c, * mep-asm.c, * mep-desc.c,
+ * mep-desc.h, * mep-dis.c, * mep-ibld.c, * mep-opc.c, * mep-opc.h,
+ * mt-asm.c, * mt-desc.c, * mt-desc.h, * mt-dis.c, * mt-ibld.c,
+ * mt-opc.c, * mt-opc.h, * openrisc-asm.c, * openrisc-desc.c,
+ * openrisc-desc.h, * openrisc-dis.c, * openrisc-ibld.c,
+ * openrisc-opc.c, * openrisc-opc.h, * xc16x-asm.c, * xc16x-desc.c,
+ * xc16x-desc.h, * xc16x-dis.c, * xc16x-ibld.c, * xc16x-opc.c,
+ * xc16x-opc.h, * xstormy16-asm.c, * xstormy16-desc.c,
+ * xstormy16-desc.h, * xstormy16-dis.c, * xstormy16-ibld.c,
* xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
-2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
-
- * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
-
-2009-07-07 Nick Clifton <nickc@redhat.com>
-
- PR 10288
- * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
- addressing modes.
-
-2009-07-06 DJ Delorie <dj@redhat.com>
-
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
-
- * i386-opc.h (CpuFMA4): Add CpuFMA4.
- (i386_cpu_flags): New.
- * i386-gen.c: Add CPU_FMA4_FLAGS.
- * i386-opc.tbl: Add FMA4 instructions.
- * i386-tbl.h: Regenerate.
- * i386-init.h: Regenerate.
- * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
- (OP_XMM_VexW): Ditto.
- (OP_EX_VexW): Ditto.
- (VEXI4_Fixup): Ditto.
- (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
- (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
- (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
- (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
- (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
- (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
- (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
- (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
- (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
- (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
- (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
- (get_vex_imm8): New. handle FMA4.
- (OP_EX_VexReg): Ditto.
-
-2009-06-30 Nick Clifton <nickc@redhat.com>
-
- PR 10288
- * arm-dis.c (coprocessor): Print the LDC and STC versions of the
- LFM and SFM instructions as comments,.
- Improve consistency of formatting for instructions displayed as
- comments and decimal values displayed with their hexadecimal
- equivalents.
- Formatting tidy ups.
-
-2009-06-29 Nick Clifton <nickc@redhat.com>
-
- PR 10288
- * arm-dis.c (enum opcode_sentinels): New: Used to mark the
- boundary between variaant and generic coprocessor instuctions.
- (coprocessor): Use it.
- Fix architecture version of MCRR and MRRC instructions.
- (arm_opcdes): Fix patterns for STRB and STRH instructions.
- (print_insn_coprocessor): Check architecture and extension masks.
- Print a hexadecimal version of any decimal constant that is
- outside of the range of -16 to +32.
- (print_arm_address): Add a return value of the offset used in the
- adress, if it is worth printing a hexadecimal version of it.
- (print_insn_neon): Print a hexadecimal version of any decimal
- constant that is outside of the range of -16 to +32.
- (print_insn_arm): Likewise.
- (print_insn_thumb16): Likewise.
- (print_insn_thumb32): Likewise.
-
- PR 10297
- * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
- of an undefined instruction.
- (arm_opcodes): Use it.
- (thumb_opcod): Use it.
- (thumb32_opc): Use it.
-
-2009-06-23 DJ Delorie <dj@redhat.com>
-
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
-
- * mep-asm.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-06-22 Nick Clifton <nickc@redhat.com>
-
- * po/fi.po: Updated Finish translation.
-
-2009-06-22 Alan Modra <amodra@bigpond.net.au>
-
- * m32c-asm.c: Regenerate.
-
-2009-06-22 Alan Modra <amodra@bigpond.net.au>
-
- * score-dis.c (print_insn_score48, print_insn_score32): Move default
- case label to proper lexical block.
- * score7-dis.c (print_insn_score32): Likewise.
-
-2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
-
- * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
- MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
- * s390-opc.txt (nopr, nop): Use new instruction format.
-
-2009-06-18 Nick Clifton <nickc@redhat.com>
-
- PR 10288
- * arm-dis.c (print_insn_coprocessor): Check that a user specified
- ARM architecture supports the matched instruction.
- (print_insn_arm): Likewise.
- (select_arm_features): New function. Fills in the fields of an
- arm_feature_set structure based on a given arm machine number.
- (print_insn): Initialise an arm_feature_set structure.
-
-2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
-
- * vax-dis.c (is_function_entry): Return success for synthetic
- symbols too.
- (is_plt_tail): New function.
- (print_insn_vax): Decode PLT entry offset longword.
-
-2009-06-15 Nick Clifton <nickc@redhat.com>
-
- PR 10186
- * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
- instruction.
-
- PR 10173
- * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
-
-2009-06-15 Nick Clifton <nickc@redhat.com>
-
- PR 10263
- * arm-dis.c (print_insn): Ignore is_data if the user has requested
- the disassembly of data as well as instructions.
-
-2009-06-11 Doug Evans <dje@sebabeach.org>
-
- * cgen.sh: Handle multiple simultaneous runs for parallel makes.
-
-2009-06-11 Anthony Green <green@moxielogic.com>
-
- * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
- (moxie_form3_opc_info): Add branch instructions.
- * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
- encoded instructions.
-
-2009-06-06 Anthony Green <green@moxielogic.com>
-
- * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
- * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
-
-2009-06-04 Alan Modra <amodra@bigpond.net.au>
-
- * dep-in.sed: Don't use \n in replacement part of s command.
- * Makefile.am (DEP1): LC_ALL for uniq.
- * Makefile.in: Regenerate.
-
-2009-06-02 Nick Clifton <nickc@redhat.com>
-
- * po/nl.po: Updated Dutch translation.
-
-2009-06-02 Tristan Gingold <gingold@adacore.com>
-
- * ia64-gen.c (parse_resource_users, print_dependency_table,
- add_dis_table_ent, finish_distable, insert_bit_table_ent,
- add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
- get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
- insert_completer_entry, print_completer_entry, print_completer_table,
- opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
-
-2009-05-28 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
-
-2009-05-26 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-05-26 Nick Clifton <nickc@redhat.com>
-
- * po/id.po: Updated Indonesian translation.
- * po/opcodes.pot: Updated template file.
-
-2009-05-26 Alan Modra <amodra@bigpond.net.au>
-
- * dep-in.sed: Don't modify .o to .lo here. Output one filename
- per line with all lines having continuation backslash. Prefix
- first line with "A", following lines with "B".
- * Makefile.am (DEP): Don't use dep.sed here.
- (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
- dep.sed here on dependencies, sort and uniq.
- * Makefile.in: Regenerate.
-
-2009-05-25 Tristan Gingold <gingold@adacore.com>
-
- * makefile.vms (OPT): New variable.
- (CFLAGS): Update compilation flags.
-
-2009-05-22 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
-
- * i386-opc.h (Cpusse5): Delete.
- (i386_cpu_flags): Delete.
- * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
- * i386-opc.tbl: Remove SSE5 instructions.
- * i386-tbl.h: Regenerate.
- * i386-init.h: Regenerate.
- * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
- (print_drex_arg): Delete.
- (OP_DREX4): Delete.
- (OP_DREX3): Delete.
- (OP_DREX_ICMP): Delete.
- (OP_DREX_FCMP): Delete.
- (DREX_*): Delete.
- (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
-
-2009-05-22 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2009-05-19 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-opc.c: Regenerate.
-
-2009-04-30 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-04-17 DJ Delorie <dj@redhat.com
-
- * mep-desc.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-04-15 Anthony Green <green@moxielogic.com>
-
- * moxie-opc.c, moxie-dis.c: Created.
- * Makefile.am: Build the moxie source files.
- * configure.in: Add moxie support.
- * Makefile.in, configure: Rebuilt.
- * disassemble.c (disassembler): Add moxie support.
- (ARCH_moxie): Define.
-
-2009-04-15 Jan Beulich <jbeulich@novell.com>
-
- * i386-opc.tbl (protb, protw, protd, protq): Set opcode
- extension to None.
- (pshab, pshaw, pshad, pshaq): Likewise.
- * i386-tbl.h: Re-generate.
-
-2009-04-08 DJ Delorie <dj@redhat.com
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
- "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
- Reorder entries so the extended mnemonics are listed before tlbilx.
-
-2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
- due to -many/-Many.
- (print_insn_powerpc): Make sure we only deprecate instructions using
- the original dialect and not a modified dialect due to -Many handling.
- Move the handling of the condition register and default operands to
- the end of the if/else if/else chain.
- * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
- instructions from newer processors are listed before older ones.
- <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
- that have instructions with conflicting opcodes.
-
-2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
- E500MC entries.
-
-2009-04-01 Christophe Lyon <christophe.lyon@st.com>
-
- * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
-
-2009-03-30 Joseph Myers <joseph@codesourcery.com>
-
- * arm-dis.c (print_insn): Also check section matches in backwards
- search for mapping symbol.
-
-2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (get_valid_dis386): Abort on unhandled table.
-
-2009-03-18 Alan Modra <amodra@bigpond.net.au>
-
- * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * openrisc-opc.c: Regenerate.
-
-2009-03-10 Nick Clifton <nickc@redhat.com>
-
- * po/id.po: Updated Indonesian translation.
-
-2009-03-10 Alan Modra <amodra@bigpond.net.au>
-
- * ppc-dis.c: Include "opintl.h".
- (struct ppc_mopt, ppc_opts): New.
- (ppc_parse_cpu): New function.
- (powerpc_init_dialect): Use it.
- (print_ppc_disassembler_options): Dump options from ppc_opts.
- Internationalize message.
-
-2009-03-06 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
-
-2009-03-04 Alan Modra <amodra@bigpond.net.au>
-
- PR 6768
- * configure.in: Test for ld --as-needed support. Link shared
- libopcodes against libm.
- * configure: Regenerate.
-
-2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
- instructions from newer processors are listed before older ones.
-
-2009-03-03 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- (HFILES): Move lm32-desc.h and lm32-opc.h from..
- (CFILES): ..here.
- * Makefile.in: Regenerate.
-
-2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
-
- * score7-dis.c: New file.
- * Makefile.am: Add dependencies for score7-dis.c.
- * Makefile.in: Regenerate.
- * configure.in: Add score7-dis to score files.
- * configure: Regenerate.
- * score-dis.c: Add support for score7 architecture.
- * score-opc.h: Likewise.
-
-2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * configure: Regenerate.
-
-2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
-
-2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
- the power7 and the isel instructions.
- * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
- (insert_dm, extract_dm): Likewise.
- (XB6): Update comment to include XX2 form.
- (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
- XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
- (RemoveXX3DM): Delete.
- (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
- "mftgpr">: Deprecate for POWER7.
- <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
- "frsqrte.">: Deprecate the three operand form and enable the two
- operand form for POWER7 and later.
- <"wait">: Extend to accept optional parameter. Enable for POWER7.
- <"waitsrv", "waitimpl">: Add extended opcodes.
- <"ldbrx", "stdbrx">: Enable for POWER7.
- <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
- <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
- "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
- "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
- "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
- "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
- "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
- "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
- <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
- "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
- "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
- "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
- "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
- "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
- "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
- "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
- "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
- "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
- "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
- "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
- "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
- "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
- "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
- "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
- "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
- "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
- "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
- "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
- "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
- "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
- "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
- "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
- "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
- "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
- "xxspltw", "xxswapd">: Add VSX opcodes.
-
-2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
- (operand_types): Remove Vex_Imm4.
-
- * i386-opc.h (Vex_Imm4): Removed.
- (OTMax): Updated.
- (i386_operand_type): Remove vex_imm4.
-
- * i386-opc.tbl: Remove Vex_Imm4 comments.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2009-02-23 Richard Earnshaw <rearnsha@arm.com>
-
- * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
- vq{r}shr{u}n.s64 insnstructions.
-
-2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
- operand to be a float point register (FRT/FRS).
-
-2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
-
- * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
- dmfc2 and dmtc2 before the architecture-level variants.
-
-2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
-
- * fr30-opc.c: Regenerate.
- * frv-opc.c: Regenerate.
- * ip2k-opc.c: Regenerate.
- * iq2000-opc.c: Regenerate.
- * lm32-opc.c: Regenerate.
- * m32c-opc.c: Regenerate.
- * m32r-opc.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mt-opc.c: Regenerate.
- * xc16x-opc.c: Regenerate.
- * xstormy16-opc.c: Regenerate.
- * tic54x-dis.c (print_instruction): Avoid compiler warning on
- sprintf call.
-
-2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
-
- * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
-
-2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c: Update copyright year.
- (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
- ordering for POWER4 and later and use the correct Server ordering.
-
-2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (January, 2009)
- * i386-dis.c (PREFIX_VEX_3A44): New.
- (VEX_LEN_3A44_P_2): Likewise.
- (PREFIX_VEX_3A48): Updated.
- (VEX_LEN_3A4C_P_2): Likewise.
- (prefix_table): Add PREFIX_VEX_3A44.
- (vex_table): Likewise.
- (vex_len_table): Add VEX_LEN_3A44_P_2.
-
- * i386-opc.tbl: Add PCLMUL + AVX instructions.
- * i386-tbl.h: Regenerated.
-
-2009-02-03 Sandip Matte <sandip@rmicorp.com>
-
- * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
- (mips_arch_choices): Add XLR entry.
- * mips-opc.c (XLR): Define.
- (mips_builtin_opcodes): Add XLR instructions.
-
-2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
-
- * Makefile.am: Add install-pdf target.
- * po/Make-in: Add install-pdf target.
- * Makefile.in: Regenerate.
-
-2009-02-02 DJ Delorie <dj@redhat.com>
-
- * mep-asm.c: Regenerate.
- * mep-desc.c: Regenerate.
- * mep-desc.h: Regenerate.
- * mep-dis.c: Regenerate.
- * mep-ibld.c: Regenerate.
- * mep-opc.c: Regenerate.
- * mep-opc.h: Regenerate.
-
-2009-01-29 Mark Mitchell <mark@codesourcery.com>
-
- * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
- qsub, and qdsub.
-
-2009-01-28 Chao-ying Fu <fu@mips.com>
-
- * mips-opc.c (suxc1): Add the flag of FP_D.
-
-2009-01-20 Alan Modra <amodra@bigpond.net.au>
-
- * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
- * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
- * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
- * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
- * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
- * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
- * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
- * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
-
-2009-01-16 Alan Modra <amodra@bigpond.net.au>
-
- * configure.in (commonbfdlib): Delete.
- (SHARED_LIBADD): Add pic libiberty if such is available.
- * configure: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
- * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
- operand form and enable the four operand form for POWER6 and later.
- <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
- three operand form for POWER6 and later.
-
-2009-01-14 Mike Frysinger <vapier@gentoo.org>
-
- * bfin-dis.c (OUTS): Use "%s" as format string.
-
-2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (cpu_flag_init): Remove a white space.
- (operand_type_init): Likewise.
-
-2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
- * i386-tbl.h: Regenerated.
-
-2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
- subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
- subS, xorS and cmpS.
-
-2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
- CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
- CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
- (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
- and CpuSYSCALL.
- (lineno): Removed.
- (set_bitfield): Take an argument, lineno. Don't report lineno
- on error if it is -1.
- (process_i386_cpu_flag): Take an argument, lineno.
- (process_i386_opcode_modifier): Likewise.
- (process_i386_operand_type): Likewise.
- (output_i386_opcode): Likewise.
- (opcode_hash_entry): Add lineno.
- (process_i386_opcodes): Updated.
- (process_i386_registers): Likewise.
- (process_i386_initializers): Likewise.
-
- * i386-opc.h (CpuP4): Removed.
- (CpuK6): Likewise.
- (CpuK8): Likewise.
- (CpuClflush): New.
- (CpuSYSCALL): Likewise.
- (CpuMMX): Updated.
- (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
- cpuclflush and cpusyscall.
-
- * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
- syscall and sysret.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
- and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
- (cpu_flags): Add CpuRdtscp.
- (set_bitfield): Remove CpuSledgehammer check.
-
- * i386-opc.h (CpuRdtscp): New.
- (CpuLM): Updated.
- (i386_cpu_flags): Add cpurdtscp.
-
- * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-opc.c (PPCNONE): Define.
- (NOPOWER4): Delete.
- (powerpc_opcodes): Initialize the new "deprecated" field.
-
-2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (December, 2008)
- * i386-dis.c (VEX_LEN_2B_M_0): Removed.
- (VEX_LEN_E7_P_2_M_0): Likewise.
- (VEX_LEN_2C_P_1): Updated.
- (VEX_LEN_E8_P_2): Likewise.
- (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
- (mod_table): Likewise.
-
- * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
- * i386-tbl.h: Regenerated.
-
-2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (process_copyright): Update for 2009.
-
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (December, 2008)
- * i386-dis.c (OP_VEX_FMA): Removed.
- (OP_EX_VexW): Likewise.
- (OP_EX_VexImmW): Likewise.
- (OP_XMM_VexW): Likewise.
- (VEXI4_Fixup): Likewise.
- (VPERMIL2_Fixup): Likewise.
- (VexI4): Likewise.
- (VexFMA): Likewise.
- (Vex128FMA): Likewise.
- (EXVexW): Likewise.
- (EXdVexW): Likewise.
- (EXqVexW): Likewise.
- (EXVexImmW): Likewise.
- (XMVexW): Likewise.
- (VPERMIL2): Likewise.
- (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
- (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
- (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
- (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
- (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
- (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
- (get_vex_imm8): Likewise.
- (OP_EX_VexReg): Likewise.
- vpermil2_op): Likewise.
- (EXVexWdq): New.
- (vex_w_dq_mode): Likewise.
- (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
- (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
- (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
- (es_reg): Updated.
- (PREFIX_VEX_38DB): Likewise.
- (PREFIX_VEX_3A4A): Likewise.
- (PREFIX_VEX_3A60): Likewise.
- (PREFIX_VEX_3ADF): Likewise.
- (VEX_LEN_3ADF_P_2): Likewise.
- (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
- PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
- PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
- PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
- PREFIX_VEX_3896...PREFIX_VEX_389F,
- PREFIX_VEX_38A6...PREFIX_VEX_38AF and
- PREFIX_VEX_38B6...PREFIX_VEX_38BF.
- (vex_table): Likewise.
- (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
- and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
- (putop): Support "%XW".
- (intel_operand_size): Handle vex_w_dq_mode.
-
- * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
-
- * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
- instructions. Add new FMA instructions.
- * i386-tbl.h: Regenerated.
-
-2009-01-02 Matthias Klose <doko@ubuntu.com>
-
- * or32-opc.c (or32_print_register, or32_print_immediate,
- disassemble_insn): Don't rely on undefined sprintf behaviour.
-
-For older changes see ChangeLog-2008
+For older changes see ChangeLog-2009
\f
Local Variables:
mode: change-log