+2010-09-22 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (decode_pseudoDEBUG_0): Add space after OUTC.
+ (decode_pseudoOChar_0): New function.
+ (_print_insn_bfin): Remove #if 0 and call new decode_pseudoOChar_0.
+
+2010-09-22 Robin Getz <robin.getz@analog.com>
+
+ * bfin-dis.c (decode_dsp32shift_0): Decode sub opcodes 2/2 as
+ LSHIFT instead of SHIFT.
+
+2010-09-22 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (constant_formats): Constify the whole structure.
+ (fmtconst): Add const to return value.
+ (reg_names): Mark const.
+ (decode_multfunc): Mark s0/s1 as const.
+ (decode_macfunc): Mark a/sop as const.
+
+2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
+
+ * arm_dis.c (coprocessor_opcodes): Add MRC entry for APSR_nzcv.
+
+2010-09-14 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Add "sync_acquire",
+ "sync_mb", "sync_release", "sync_rmb" and "sync_wmb".
+
+2010-09-10 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * src/opcodes/dlx-dis.c (print_insn_dlx): Use dlx_insn type for
+ dlx_insn_type array.
+
+2010-08-31 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/11960
+ * i386-dis.c (sIv): New.
+ (dis386): Replace Iq with sIv on "pushT".
+ (reg_table): Replace T with {T|} on callT, JcallT, jmpT and JjmpT.
+ (x86_64_table): Replace {T|}/{P|} with P.
+ (putop): Add 'w' to 'T'/'P' if needed for Intel syntax.
+ (OP_sI): Update v_mode. Remove w_mode.
+
+2010-08-27 Nathan Froyd <froydnj@codesourcery.com>
+
+ * ppc-opc.c (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate
+ on E500 and E500MC.
+
+2010-08-17 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (reg_table): Replace Eb with Mb on prefetch and
+ prefetchw.
+
+2010-08-06 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Define CpuNop extension flag, add
+ to processor flags for PENTIUMPRO processors and later.
+ * i386-opc.h (enum): Add CpuNop.
+ (i386_cpu_flags): Add cpunop bit.
+ * i386-opc.tbl: Change nop cpu_flags.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2010-08-06 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-opc.h (enum): Fix typos in comments.
+
+2010-08-06 Alan Modra <amodra@gmail.com>
+
+ * disassemble.c: Formatting.
+ (disassemble_init_for_target <ARCH_m32c>): Comment on endian.
+
+2010-08-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.tbl: Add Cpu186 to ud1/ud2/ud2a/ud2b.
+ * i386-tbl.h: Regenerated.
+
+2010-08-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (dis386_twobyte): Replace ud2a/ud2b with ud2/ud1.
+
+ * i386-opc.tbl: Add ud1. Remove Cpu686 from ud2/ud2a/ud2b.
+ * i386-tbl.h: Regenerated.
+
+2010-07-29 DJ Delorie <dj@redhat.com>
+
+ * rx-decode.opc (SRR): New.
+ (rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
+ r0,r0) and NOP3 (max r0,r0) special cases.
+ * rx-decode.c: Regenerate.
+
+2010-07-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c: Add 0F to VEX opcode enums.
+
+2010-07-27 DJ Delorie <dj@redhat.com>
+
+ * rx-decode.opc (store_flags): Remove, replace with F_* macros.
+ (rx_decode_opcode): Likewise.
+ * rx-decode.c: Regenerate.
+
+2010-07-23 Naveen.H.S <naveen.S@kpitcummins.com>
+ Ina Pandit <ina.pandit@kpitcummins.com>
+
+ * v850-dis.c (v850_sreg_names): Updated structure for system
+ registers.
+ (float_cc_names): new structure for condition codes.
+ (print_value): Update the function that prints value.
+ (get_operand_value): New function to get the operand value.
+ (disassemble): Updated to handle the disassembly of instructions.
+ (print_insn_v850): Updated function to print instruction for different
+ families.
+ * opcodes/v850-opc.c (v850_msg_is_out_of_range, insert_i5div1,
+ extract_i5div1, insert_i5div2, extract_i5div2, insert_i5div3,
+ extract_i5div3, insert_d5_4, extract_d5_4, extract_d8_6,
+ insert_d8_7, extract_d8_7, insert_v8, extract_v8, insert_u16_loop,
+ extract_u16_loop, insert_d16_15, extract_d16_15, insert_d16_16,
+ extract_d16_16, nsert_d17_16, extract_d17_16, insert_d22,
+ extract_d22, insert_d23, extract_d23, insert_i9, extract_i9,
+ insert_u9, extract_u9, extract_spe, insert_r4, extract_r4): New.
+ (insert_d8_7, insert_d5_4, insert_i5div): Remove.
+ (v850_operands): Update with the relocation name. Also update
+ the instructions with specific set of processors.
+
+2010-07-08 Tejas Belagod <tejas.belagod@arm.com>
+
+ * arm-dis.c (print_insn_arm): Add cases for printing more
+ symbolic operands.
+ (print_insn_thumb32): Likewise.
+
+2010-07-06 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-dis.c (print_insn_mips): Correct branch instruction type
+ determination.
+
+2010-07-06 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-dis.c (print_mips16_insn_arg): Remove branch instruction
+ type and delay slot determination.
+ (print_insn_mips16): Extend branch instruction type and delay
+ slot determination to cover all instructions.
+ * mips16-opc.c (BR): Remove macro.
+ (UBR, CBR): New macros.
+ (mips16_opcodes): Update branch annotation for "b", "beqz",
+ "bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
+ and "jrc".
+
+2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ AVX Programming Reference (June, 2010)
+ * i386-dis.c (mod_table): Replace rdrnd with rdrand.
+ * i386-opc.tbl: Likewise.
+ * i386-tbl.h: Regenerated.
+
+2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.h (CpuFSGSBase): Fix a typo in comments.
+
+2010-07-03 Andreas Schwab <schwab@linux-m68k.org>
+
+ * ppc-dis.c (powerpc_init_dialect): Cast PPC_OPCODE_xxx to
+ ppc_cpu_t before inverting.
+ (ppc_parse_cpu): Likewise.
+ (print_insn_powerpc): Likewise.
+
+2010-07-03 Alan Modra <amodra@gmail.com>
+
+ * ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
+ * ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
+ (PPC64, MFDEC2): Update.
+ (NON32, NO371): Define.
+ (powerpc_opcode): Update to not use old opcode flags, and avoid
+ -m601 duplicates.
+
+2010-07-03 DJ Delorie <dj@delorie.com>
+
+ * m32c-ibld.c: Regenerate.
+
+2010-07-03 Alan Modra <amodra@gmail.com>
+
+ * ppc-opc.c (PWR2COM): Define.
+ (PPCPWR2): Add PPC_OPCODE_COMMON.
+ (powerpc_opcodes): Add "subc", "subco", "subco.", "fcir", "fcir.",
+ "fcirz", "fcirz." to -mcom opcodes. Remove "mfsri", "dclst",
+ "rac" from -mcom.
+
+2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ AVX Programming Reference (June, 2010)
+ * i386-dis.c (PREFIX_0FAE_REG_0): New.
+ (PREFIX_0FAE_REG_1): Likewise.
+ (PREFIX_0FAE_REG_2): Likewise.
+ (PREFIX_0FAE_REG_3): Likewise.
+ (PREFIX_VEX_3813): Likewise.
+ (PREFIX_VEX_3A1D): Likewise.
+ (prefix_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
+ PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3, PREFIX_VEX_3813 and
+ PREFIX_VEX_3A1D.
+ (vex_table): Add PREFIX_VEX_3813 and PREFIX_VEX_3A1D.
+ (mod_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
+ PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3 xsaveopt and rdrnd.
+
+ * i386-gen.c (cpu_flag_init): Add CPU_XSAVEOPT_FLAGS,
+ CPU_FSGSBASE_FLAGS, CPU_RDRND_FLAGS and CPU_F16C_FLAGS.
+ (cpu_flags): Add CpuXsaveopt, CpuFSGSBase, CpuRdRnd and CpuF16C.
+
+ * i386-opc.h (CpuXsaveopt): New.
+ (CpuFSGSBase): Likewise.
+ (CpuRdRnd): Likewise.
+ (CpuF16C): Likewise.
+ (i386_cpu_flags): Add cpuxsaveopt, cpufsgsbase, cpurdrnd and
+ cpuf16c.
+
+ * i386-opc.tbl: Add xsaveopt, rdfsbase, rdgsbase, rdrnd,
+ wrfsbase, wrgsbase, vcvtph2ps and vcvtps2ph.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2010-07-01 Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+
+ * ppc-opc.c (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf
+ and mtocrf on EFS.
+
+2010-06-29 Alan Modra <amodra@gmail.com>
+
+ * maxq-dis.c: Delete file.
+ * Makefile.am: Remove references to maxq.
+ * configure.in: Likewise.
+ * disassemble.c: Likewise.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2010-06-29 Alan Modra <amodra@gmail.com>
+
+ * mep-dis.c: Regenerate.
+
+2010-06-28 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * arm-disc.c (parse_insn_neon): Fix Neon alignment syntax.
+
+2010-06-27 Alan Modra <amodra@gmail.com>
+
+ * arc-dis.c (arc_sprintf): Delete set but unused variables.
+ (decodeInstr): Likewise.
+ * dlx-dis.c (print_insn_dlx): Likewise.
+ * h8300-dis.c (bfd_h8_disassemble_init): Likewise.
+ * maxq-dis.c (check_move, print_insn): Likewise.
+ * mep-dis.c (mep_examine_ivc2_insns): Likewise.
+ * msp430-dis.c (msp430_branchinstr): Likewise.
+ * bfin-dis.c (_print_insn_bfin): Avoid set but unused warning.
+ * cgen-asm.in (parse_insn_normal, _cgen_assemble_insn): Likewise.
+ * sparc-dis.c (print_insn_sparc): Likewise.
+ * fr30-asm.c: Regenerate.
+ * frv-asm.c: Regenerate.
+ * ip2k-asm.c: Regenerate.
+ * iq2000-asm.c: Regenerate.
+ * lm32-asm.c: Regenerate.
+ * m32c-asm.c: Regenerate.
+ * m32r-asm.c: Regenerate.
+ * mep-asm.c: Regenerate.
+ * mt-asm.c: Regenerate.
+ * openrisc-asm.c: Regenerate.
+ * xc16x-asm.c: Regenerate.
+ * xstormy16-asm.c: Regenerate.
+
+2010-06-16 Vincent Rivière <vincent.riviere@freesbee.fr>
+
+ PR gas/11673
+ * m68k-opc.c (m68k_opcodes): Remove move.l for isab and later.
+
+2010-06-16 Vincent Rivière <vincent.riviere@freesbee.fr>
+
+ PR binutils/11676
+ * m68k-dis.c (print_insn_arg): Prefix float constants with #0e.
+
+2010-06-14 Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+
+ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
+ e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
+ * ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
+ touch floating point regs and are enabled by COM, PPC or PPCCOM.
+ Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
+ Treat lwsync as msync on e500.
+
+2010-06-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * arm-dis.c (thumb-opcodes): Add disassembly for movs.
+
+2010-05-28 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * arm-dis.c (print_insn_neon): Ensure disassembly of Neon
+ constants is the same on 32-bit and 64-bit hosts.
+
+2010-05-27 Jason Duerstock <jason.duerstock+binutils@gmail.com>
+
+ * m68k-dis.c (print_insn_m68k): Emit undefined instructions as
+ .short directives so that they can be reassembled.
+
+2010-05-26 Catherine Moore <clm@codesourcery.com>
+ David Ung <davidu@mips.com>
+
+ * mips-opc.c: Change membership to I1 for instructions ssnop and
+ ehb.
+
+2010-05-26 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (sib): New.
+ (get_sib): Likewise.
+ (print_insn): Call get_sib.
+ OP_E_memory): Use sib.
+
+2010-05-26 Catherine Moore <clm@codesoourcery.com>
+
+ * mips-dis.c (mips_arch): Remove INSN_MIPS16.
+ * mips-opc.c (I16): Remove.
+ (mips_builtin_op): Reclassify jalx.
+
+2010-05-19 Alan Modra <amodra@gmail.com>
+
+ * ppc-opc.c (powerpc_opcodes): Enable divdeu, devweu, divde,
+ divwe, divdeuo, divweuo, divdeo, divweo for A2. Add icswepx.
+
+2010-05-13 Alan Modra <amodra@gmail.com>
+
+ * ppc-opc.c (powerpc_opcodes): Correct wclr encoding.
+
+2010-05-11 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * arm-dis.c (thumb_opcodes): Update ldmia entry to use new %W
+ format.
+ (print_insn_thumb16): Add support for new %W format.
+
+2010-05-07 Tristan Gingold <gingold@adacore.com>
+
+ * Makefile.in: Regenerate with automake 1.11.1.
+ * aclocal.m4: Ditto.
+
+2010-05-05 Nick Clifton <nickc@redhat.com>
+
+ * po/es.po: Updated Spanish translation.
+
+2010-04-22 Nick Clifton <nickc@redhat.com>
+
+ * po/opcodes.pot: Updated by the Translation project.
+ * po/vi.po: Updated Vietnamese translation.
+
+2010-04-16 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (get_valid_dis386): Return bad_opcode on unknown
+ bits in opcode.
+
+2010-04-09 Nick Clifton <nickc@redhat.com>
+
+ * i386-dis.c (print_insn): Remove unused variable op.
+ (OP_sI): Remove unused variable mask.
+
+2010-04-07 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2010-04-06 Peter Bergner <bergner@vnet.ibm.com>
+
+ * ppc-opc.c (RBOPT): New define.
+ ("dccci"): Enable for PPCA2. Make operands optional.
+ ("iccci"): Likewise. Do not deprecate for PPC476.
+
+2010-04-02 Masaki Muranaka <monaka@monami-software.com>
+
+ * cr16-opc.c (cr16_instruction): Fix typo in comment.
+
+2010-03-25 Joseph Myers <joseph@codesourcery.com>
+
+ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
+ * Makefile.in: Regenerate.
+ * configure.in (bfd_tic6x_arch): New.
+ * configure: Regenerate.
+ * disassemble.c (ARCH_tic6x): Define if ARCH_all.
+ (disassembler): Handle TI C6X.
+ * tic6x-dis.c: New.
+
+2010-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (decode_regs_hi): Change REG_LH2 typo to REG_MH2.
+
+2010-03-23 Joseph Myers <joseph@codesourcery.com>
+
+ * dis-buf.c (buffer_read_memory): Give error for reading just
+ before the start of memory.
+
+2010-03-22 Sebastian Pop <sebastian.pop@amd.com>
+ Quentin Neill <quentin.neill@amd.com>
+
+ * i386-dis.c (OP_LWP_I): Removed.
+ (reg_table): Do not use OP_LWP_I, use Iq.
+ (OP_LWPCB_E): Remove use of names16.
+ (OP_LWP_E): Same.
+ * i386-opc.tbl: Removed 16bit LWP insns. 32bit LWP insns
+ should not set the Vex.length bit.
+ * i386-tbl.h: Regenerated.
+
+2010-02-25 Edmar Wienskoski <edmar@freescale.com>
+
+ * ppc-dis.c (ppc_opts): Add PPC_OPCODE_E500MC for "e500mc64".
+
+2010-02-24 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/6773
+ * arm-dis.c (arm_opcodes): Replace <prefix>addsubx with
+ <prefix>asx. Replace <prefix>subaddx with <prefix>sax.
+ (thumb32_opcodes): Likewise.
+
+2010-02-15 Nick Clifton <nickc@redhat.com>
+
+ * po/vi.po: Updated Vietnamese translation.
+
+2010-02-12 Doug Evans <dje@sebabeach.org>
+
+ * lm32-opinst.c: Regenerate.
+
+2010-02-11 Doug Evans <dje@sebabeach.org>
+
+ * cgen-dis.in (print_normal): Delete CGEN_PRINT_NORMAL.
+ (print_address): Delete CGEN_PRINT_ADDRESS.
+ * fr30-dis.c, * frv-dis.c, * ip2k-dis.c, * iq2000-dis.c,
+ * lm32-dis.c, * m32c-dis.c, * m32r-desc.c, * m32r-desc.h,
+ * m32r-dis.c, * mep-dis.c, * mt-dis.c, * openrisc-dis.c,
+ * xc16x-dis.c, * xstormy16-dis.c: Regenerate.
+
+ * fr30-desc.c, * fr30-desc.h, * fr30-opc.c,
+ * frv-desc.c, * frv-desc.h, * frv-opc.c,
+ * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c,
+ * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c,
+ * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opinst.c,
+ * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
+ * m32r-desc.c, * m32r-desc.h, * m32r-opc.c, * m32r-opinst.c,
+ * mep-desc.c, * mep-desc.h, * mep-opc.c,
+ * mt-desc.c, * mt-desc.h, * mt-opc.c,
+ * openrisc-desc.c, * openrisc-desc.h, * openrisc-opc.c,
+ * xc16x-desc.c, * xc16x-desc.h, * xc16x-opc.c,
+ * xstormy16-desc.c, * xstormy16-desc.h, * xstormy16-opc.c: Regenerate.
+
+2010-02-11 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c: Update copyright.
+ * i386-gen.c: Likewise.
+ * i386-opc.h: Likewise.
+ * i386-opc.tbl: Likewise.
+
+2010-02-10 Quentin Neill <quentin.neill@amd.com>
+ Sebastian Pop <sebastian.pop@amd.com>
+
+ * i386-dis.c (OP_EX_VexImmW): Reintroduced
+ function to handle 5th imm8 operand.
+ (PREFIX_VEX_3A48): Added.
+ (PREFIX_VEX_3A49): Added.
+ (VEX_W_3A48_P_2): Added.
+ (VEX_W_3A49_P_2): Added.
+ (prefix table): Added entries for PREFIX_VEX_3A48
+ and PREFIX_VEX_3A49.
+ (vex table): Added entries for VEX_W_3A48_P_2 and
+ and VEX_W_3A49_P_2.
+ * i386-gen.c (operand_type_init): Added OPERAND_TYPE_VEC_IMM4
+ for Vec_Imm4 operands.
+ * i386-opc.h (enum): Added Vec_Imm4.
+ (i386_operand_type): Added vec_imm4.
+ * i386-opc.tbl: Add entries for vpermilp[ds].
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Regenerated.
+
+2010-02-10 Richard Sandiford <r.sandiford@uk.ibm.com>
+
+ * ppc-dis.c (ppc_opts): Add "pwr4", "pwr5", "pwr5x", "pwr6"
+ and "pwr7". Move "a2" into alphabetical order.
+
+2010-02-08 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+
+ * ppc-dis.c (ppc_opts): Add titan entry.
+ * ppc-opc.c (TITAN, MULHW): Define.
+ (powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
+
+2010-02-03 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Rename CPU_AMDFAM15_FLAGS
+ to CPU_BDVER1_FLAGS
+ * i386-init.h: Regenerated.
+
+2010-02-03 Anthony Green <green@moxielogic.com>
+
+ * moxie-opc.c (moxie_form1_opc_info): Move "nop" from 0x00 to
+ 0x0f, and make 0x00 an illegal instruction.
+
+2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * opcodes/arm-dis.c (struct arm_private_data): New.
+ (print_insn_coprocessor, print_insn_arm): Update to use struct
+ arm_private_data.
+ (is_mapping_symbol, get_map_sym_type): New functions.
+ (get_sym_code_type): Check the symbol's section. Do not check
+ mapping symbols.
+ (print_insn): Default to disassembling ARM mode code. Check
+ for mapping symbols separately from other symbols. Use
+ struct arm_private_data.
+
+2010-01-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (EXVexWdqScalar): New.
+ (vex_scalar_w_dq_mode): Likewise.
+ (prefix_table): Update entries for PREFIX_VEX_3899,
+ PREFIX_VEX_389B, PREFIX_VEX_389D, PREFIX_VEX_389F,
+ PREFIX_VEX_38A9, PREFIX_VEX_38AB, PREFIX_VEX_38AD,
+ PREFIX_VEX_38AF, PREFIX_VEX_38B9, PREFIX_VEX_38BB,
+ PREFIX_VEX_38BD and PREFIX_VEX_38BF.
+ (intel_operand_size): Handle vex_scalar_w_dq_mode.
+ (OP_EX): Likewise.
+
+2010-01-27 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (XMScalar): New.
+ (EXdScalar): Likewise.
+ (EXqScalar): Likewise.
+ (EXqScalarS): Likewise.
+ (VexScalar): Likewise.
+ (EXdVexScalarS): Likewise.
+ (EXqVexScalarS): Likewise.
+ (XMVexScalar): Likewise.
+ (scalar_mode): Likewise.
+ (d_scalar_mode): Likewise.
+ (d_scalar_swap_mode): Likewise.
+ (q_scalar_mode): Likewise.
+ (q_scalar_swap_mode): Likewise.
+ (vex_scalar_mode): Likewise.
+ (vex_len_table): Duplcate entries for VEX_LEN_10_P_1,
+ VEX_LEN_10_P_3, VEX_LEN_11_P_1, VEX_LEN_11_P_3, VEX_LEN_2A_P_1,
+ VEX_LEN_2A_P_3, VEX_LEN_2C_P_3, VEX_LEN_2D_P_1, VEX_LEN_2E_P_0,
+ VEX_LEN_2E_P_2, VEX_LEN_2F_P_2, VEX_LEN_51_P_1, VEX_LEN_51_P_3,
+ VEX_LEN_52_P_1, VEX_LEN_53_P_1, VEX_LEN_58_P_1, VEX_LEN_58_P_3,
+ VEX_LEN_59_P_1, VEX_LEN_5A_P_1, VEX_LEN_5A_P_3, VEX_LEN_5C_P_1,
+ VEX_LEN_5C_P_3, VEX_LEN_5D_P_1, VEX_LEN_5D_P_3, VEX_LEN_5E_P_1,
+ VEX_LEN_5E_P_3, VEX_LEN_5F_P_1, VEX_LEN_5F_P_3, VEX_LEN_6E_P_2,
+ VEX_LEN_7E_P_1, VEX_LEN_7E_P_2, VEX_LEN_D6_P_2, VEX_LEN_C2_P_1,
+ VEX_LEN_C2_P_3, VEX_LEN_3A0A_P_2 and VEX_LEN_3A0B_P_2.
+ (vex_w_table): Update entries for VEX_W_10_P_1, VEX_W_10_P_3,
+ VEX_W_11_P_1, VEX_W_11_P_3, VEX_W_2E_P_0, VEX_W_2E_P_2,
+ VEX_W_2F_P_0, VEX_W_2F_P_2, VEX_W_51_P_1, VEX_W_51_P_3,
+ VEX_W_52_P_1, VEX_W_53_P_1, VEX_W_58_P_1, VEX_W_58_P_3,
+ VEX_W_59_P_1, VEX_W_59_P_3, VEX_W_5A_P_1, VEX_W_5A_P_3,
+ VEX_W_5C_P_1, VEX_W_5C_P_3, VEX_W_5D_P_1, VEX_W_5D_P_3,
+ VEX_W_5E_P_1, VEX_W_5E_P_3, VEX_W_5F_P_1, VEX_W_5F_P_3,
+ VEX_W_7E_P_1, VEX_W_D6_P_2 VEX_W_C2_P_1, VEX_W_C2_P_3,
+ VEX_W_3A0A_P_2 and VEX_W_3A0B_P_2.
+ (intel_operand_size): Handle d_scalar_mode, d_scalar_swap_mode,
+ q_scalar_mode, q_scalar_swap_mode.
+ (OP_XMM): Handle scalar_mode.
+ (OP_EX): Handle d_scalar_mode, d_scalar_swap_mode, q_scalar_mode
+ and q_scalar_swap_mode.
+ (OP_VEX): Handle vex_scalar_mode.
+
+2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (prefix_table): Remove trailing { Bad_Opcode }.
+
+2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (vex_len_table): Remove trailing { Bad_Opcode }.
+
+2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (prefix_table): Remove trailing { Bad_Opcode }.
+
+2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (Bad_Opcode): New.
+ (bad_opcode): Likewise.
+ (dis386): Replace { "(bad)", { XX } } with { Bad_Opcode }.
+ (dis386_twobyte): Likewise.
+ (reg_table): Likewise.
+ (prefix_table): Likewise.
+ (x86_64_table): Likewise.
+ (vex_len_table): Likewise.
+ (vex_w_table): Likewise.
+ (mod_table): Likewise.
+ (rm_table): Likewise.
+ (float_reg): Likewise.
+ (reg_table): Remove trailing "(bad)" entries.
+ (prefix_table): Likewise.
+ (x86_64_table): Likewise.
+ (vex_len_table): Likewise.
+ (vex_w_table): Likewise.
+ (mod_table): Likewise.
+ (rm_table): Likewise.
+ (get_valid_dis386): Handle bytemode 0.
+
+2010-01-23 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.h (VEXScalar): New.
+
+ * i386-opc.tbl: Replace "Vex" with "Vex=3" on AVX scalar
+ instructions.
+ * i386-tbl.h: Regenerated.
+
+2010-01-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (mod_table): Use FXSAVE on xsave and xrstor.
+
+ * i386-opc.tbl: Add xsave64 and xrstor64.
+ * i386-tbl.h: Regenerated.
+
+2010-01-20 Nick Clifton <nickc@redhat.com>
+
+ PR 11170
+ * arm-dis.c (print_arm_address): Do not ignore negative bit in PC
+ based post-indexed addressing.
+
+2010-01-15 Sebastian Pop <sebastian.pop@amd.com>
+
+ * i386-opc.tbl: Support all the possible aliases for VPCOM* insns.
+ * i386-tbl.h: Regenerated.
+
+2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.h (VexVVVV): Replace VEX.DNS with VEX.NDS in
+ comments.
+
+2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (names_mm): New.
+ (intel_names_mm): Likewise.
+ (att_names_mm): Likewise.
+ (names_xmm): Likewise.
+ (intel_names_xmm): Likewise.
+ (att_names_xmm): Likewise.
+ (names_ymm): Likewise.
+ (intel_names_ymm): Likewise.
+ (att_names_ymm): Likewise.
+ (print_insn): Set names_mm, names_xmm and names_ymm.
+ (OP_MMX): Use names_mm, names_xmm and names_ymm.
+ (OP_XMM): Likewise.
+ (OP_EM): Likewise.
+ (OP_EMC): Likewise.
+ (OP_MXC): Likewise.
+ (OP_EX): Likewise.
+ (XMM_Fixup): Likewise.
+ (OP_VEX): Likewise.
+ (OP_EX_VexReg): Likewise.
+ (OP_Vex_2src): Likewise.
+ (OP_Vex_2src_1): Likewise.
+ (OP_Vex_2src_2): Likewise.
+ (OP_REG_VexI4): Likewise.
+
+2010-01-13 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (print_insn): Update comments.
+
+2010-01-12 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (rex_original): Removed.
+ (ckprefix): Remove rex_original.
+ (print_insn): Update comments.
+
+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+2010-01-07 Doug Evans <dje@sebabeach.org>
+
+ * cgen-ibld.in (insert_normal, extract_normal): Minor cleanup.
+ * fr30-ibld.c, * frv-ibld.c, * ip2k-ibld.c, * iq2000-ibld.c,
+ * lm32-ibld.c, * m32c-ibld.c, * m32r-ibld.c, * mep-ibld.c,
+ * mt-ibld.c, * openrisc-ibld.c, * xc16x-ibld.c,
+ * xstormy16-ibld.c: Regenerate.
+
2010-01-06 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Add new CPU_AMDFAM15_FLAGS.