-\documentclass[]{book}
+\documentclass[oneside]{book}
\usepackage{lmodern}
\usepackage{amssymb,amsmath}
\usepackage{lscape}
\usepackage{sectsty}
\usepackage{appendix}
+\usepackage{graphicx}
+\usepackage[firstpage]{draftwatermark}
+\usepackage[printonlyused,withpage]{acronym}
+\usepackage{float}
+\usepackage{url}
+\usepackage[useregional]{datetime2}
\usepackage{anyfontsize}
\usepackage{ifxetex,ifluatex}
\usepackage{fixltx2e} % provides \textsubscript
}{}
\PassOptionsToPackage{hyphens}{url} % url is loaded by hyperref
\usepackage[unicode=true]{hyperref}
-\hypersetup{
- pdfborder={0 0 0},
+\hypersetup{colorlinks=true,
+ linkcolor=blue,
+ filecolor=cyan,
+ urlcolor=magenta,
breaklinks=true}
\usepackage[margin=0.9in]{geometry}
+\usepackage{color}
+\usepackage{fancyvrb}
+\newcommand{\VerbBar}{|}
+\newcommand{\VERB}{\Verb[commandchars=\\\{\}]}
+\DefineVerbatimEnvironment{Highlighting}{Verbatim}{commandchars=\\\{\},xleftmargin=5mm}
+% Add ',fontsize=\small' for more characters per line
+\newenvironment{Shaded}{}{}
+\newcommand{\KeywordTok}[1]{\textcolor[rgb]{0.00,0.44,0.13}{\textbf{#1}}}
+\newcommand{\DataTypeTok}[1]{\textcolor[rgb]{0.56,0.13,0.00}{#1}}
+\newcommand{\DecValTok}[1]{\textcolor[rgb]{0.25,0.63,0.44}{#1}}
+\newcommand{\BaseNTok}[1]{\textcolor[rgb]{0.25,0.63,0.44}{#1}}
+\newcommand{\FloatTok}[1]{\textcolor[rgb]{0.25,0.63,0.44}{#1}}
+\newcommand{\ConstantTok}[1]{\textcolor[rgb]{0.53,0.00,0.00}{#1}}
+\newcommand{\CharTok}[1]{\textcolor[rgb]{0.25,0.44,0.63}{#1}}
+\newcommand{\SpecialCharTok}[1]{\textcolor[rgb]{0.25,0.44,0.63}{#1}}
+\newcommand{\StringTok}[1]{\textcolor[rgb]{0.25,0.44,0.63}{#1}}
+\newcommand{\VerbatimStringTok}[1]{\textcolor[rgb]{0.25,0.44,0.63}{#1}}
+\newcommand{\SpecialStringTok}[1]{\textcolor[rgb]{0.73,0.40,0.53}{#1}}
+\newcommand{\ImportTok}[1]{#1}
+\newcommand{\CommentTok}[1]{\textcolor[rgb]{0.38,0.63,0.69}{\textit{#1}}}
+\newcommand{\DocumentationTok}[1]{\textcolor[rgb]{0.73,0.13,0.13}{\textit{#1}}}
+\newcommand{\AnnotationTok}[1]{\textcolor[rgb]{0.38,0.63,0.69}{\textbf{\textit{#1}}}}
+\newcommand{\CommentVarTok}[1]{\textcolor[rgb]{0.38,0.63,0.69}{\textbf{\textit{#1}}}}
+\newcommand{\OtherTok}[1]{\textcolor[rgb]{0.00,0.44,0.13}{#1}}
+\newcommand{\FunctionTok}[1]{\textcolor[rgb]{0.02,0.16,0.49}{#1}}
+\newcommand{\VariableTok}[1]{\textcolor[rgb]{0.10,0.09,0.49}{#1}}
+\newcommand{\ControlFlowTok}[1]{\textcolor[rgb]{0.00,0.44,0.13}{\textbf{#1}}}
+\newcommand{\OperatorTok}[1]{\textcolor[rgb]{0.40,0.40,0.40}{#1}}
+\newcommand{\BuiltInTok}[1]{#1}
+\newcommand{\ExtensionTok}[1]{#1}
+\newcommand{\PreprocessorTok}[1]{\textcolor[rgb]{0.74,0.48,0.00}{#1}}
+\newcommand{\AttributeTok}[1]{\textcolor[rgb]{0.49,0.56,0.16}{#1}}
+\newcommand{\RegionMarkerTok}[1]{#1}
+\newcommand{\InformationTok}[1]{\textcolor[rgb]{0.38,0.63,0.69}{\textbf{\textit{#1}}}}
+\newcommand{\WarningTok}[1]{\textcolor[rgb]{0.38,0.63,0.69}{\textbf{\textit{#1}}}}
+\newcommand{\AlertTok}[1]{\textcolor[rgb]{1.00,0.00,0.00}{\textbf{#1}}}
+\newcommand{\ErrorTok}[1]{\textcolor[rgb]{1.00,0.00,0.00}{\textbf{#1}}}
+\newcommand{\NormalTok}[1]{#1}
+
+% these come from:
+% https://gist.github.com/bgeron/72ebbacf5930537022079d9953f15713
+\usepackage{newunicodechar}
+\newcommand\DeclareUnicodeInv[2]{\DeclareUnicodeCharacter{#2}{#1}}
+
+\DeclareUnicodeCharacter{03A0}{\ensuremath{\Pi}}
+\DeclareUnicodeCharacter{2208}{\ensuremath{\in}}
+\DeclareUnicodeCharacter{03C0}{\ensuremath{\pi}}
+\DeclareUnicodeCharacter{221A}{$\sqrt{}$}
+\DeclareUnicodeCharacter{221B}{$\sqrt[3]{}$}
+\DeclareUnicodeInv{\ensuremath{\mathbb{Z}}}{2124}
+
+% indent all verbatim
+\catcode`\@=11
+\let \saveverbatime \@xverbatim
+\def \@xverbatim {\leftskip = 1cm\relax\saveverbatime}
+\catcode`\@=12
+
\usepackage{longtable,booktabs}
% Fix footnotes in tables (requires footnote package)
\IfFileExists{footnote.sty}{\usepackage{footnote}\makesavenoteenv{long
\def\fps@figure{htbp}
\makeatother
+% graphics path for primer
+\graphicspath{ {svp64-primer/img/} }
\date{}
\begin{document}
-\chapter*{Introduction}
-\addcontentsline{toc}{chapter}{Introduction} \markboth{INTRODUCTION}{}
+\chapter*{Preamble}
+\addcontentsline{toc}{chapter}{Preamble} \markboth{INTRODUCTION}{}
+
+\textbf{Last modified date: \today}
This document is an auto-generated version of the Draft SVP64
Specification available at
https://git.libre-soc.org/?p=libreriscv.git;a=blob;f=openpower/Makefile;hb=HEAD
\end{verbatim}
+by executing the following commands:
+
+\begin{verbatim}
+ git clone https://git.libre-soc.org/git/libreriscv.git libresoc
+ cd libresoc/libresoc/openpower
+ make pdf
+\end{verbatim}
+
Simple-V Cray-style Vectors have been developed by the Libre-SOC Team,
sponsored by the NLnet Foundation and NGI POINTER under
EU Grants 871528 and 957073.
+Simple-V is in DRAFT Status and will be submitted publicly
+(non-confidentially) through the OPF ISA WG "External Submissions"
+Process. Funding from NLnet, through their Privacy and Enhanced Trust
+Programme, requires full transparency.
+
+As this document is under continuous rapid revision please check frequently
+at:
+
+\begin{verbatim}
+ https://ftp.libre-soc.org/simple_v_spec.pdf
+\end{verbatim}
+
+\subsection*{Contacts}
+For questions, comments, and clarification, please contact the following:
+\begin{itemize}
+ \itemsep -0.3em
+ \item Libre-SOC ISA Dev Mailing List - libre-soc-isa@lists.libre-soc.org
+ \item Luke Kenneth Casson Leighton - Libre-SOC team lead and Red
+ Semiconductor Ltd Director - lkcl@lkcl.net
+ \item David Calderwood - Red Semiconductor Ltd Director -
+ djac@calderwoodhan.com
+ \item Toshaan Bharvani - OpenPOWER Foundation Technical Chair, VanTosh
+ Director - toshaan@vantosh.com
+ \item Konstantinos Margaritis - Engineer and Founder of VectorCamp, writing optimised assembler for a number of SIMD/Vector ISAs - konstantinos@vectorcamp.gr
+ \item Dmitry Selyutin - Libre-SOC engineer, working on binutils SVP64 assembler - ghostmansd@gmail.com
+ \item Jacob Lifshay - Libre-SOC engineer, CPU arch and verification - programmerjake@gmail.com
+ \item Cesar Strauss - Libre-SOC engineer, CPU arch and verification - cestrauss@gmail.com
+ \item Andrey Miroshnikov - Libre-SOC engineer, assisting with documentation - andrey@technepisteme.xyz
+\end{itemize}
+
+\newpage
+\subsection*{Executive Summary}
+\hypertarget{svux2fexecutive_summary}{}
+\input{tex_out/executive_summary.tex}
+
+\newpage
+\begin{landscape}
+\addcontentsline{toc}{chapter}{Comparison Table} \markboth{INTRODUCTION}{}
+\hypertarget{svux2fcomparison_table}{}
+{
+\fontsize{6}{8}\selectfont
+\input{tex_out/comparison_table.tex}
+}
+\end{landscape}
+
+\part{Scalable Vectors Primer}
+\input{svp64-primer/acronyms}
+%\chapter*{Executive Summary}
+\include{svp64-primer/summary}
+\bibliography{svp64-primer/references}
+\bibliographystyle{ieeetr}
+
\tableofcontents
+% Part II
+\part{Scalable Vectors for the Power ISA}
+
+
+\chapter{Fields and Forms}
+\hypertarget{svux2ffields}{}
+\input{tex_out/fields.tex}
\chapter{Scalable Vectors for the Power ISA}
+\hypertarget{svux2fscalvecpowisa}{}
+\hypertarget{SVux7csv}{}
\input{tex_out/sv.tex}
-\chapter{Overview}\hypertarget{svux2foverview}{Overview}
+\chapter{Other Vector ISAs}\hypertarget{svux2fvector_isa_comparison}{}
+\input{tex_out/vector_isas.tex}
+\chapter{Overview}\hypertarget{svux2foverview}{}
\input{tex_out/overview.tex}
-\chapter{Compliancy Levels}
+\chapter{Compliancy Levels}\hypertarget{svux2fcompliancy_levels}{}
\input{tex_out/compliancy_levels.tex}
-\chapter{SVP64}\hypertarget{svux2fsvp64}{SVP64}
+\chapter{SVP64}\hypertarget{svux2fsvp64}{}
\input{tex_out/svp64.tex}
-\chapter{SPRs}
+\chapter{SPRs}\hypertarget{svux2fsprs}{}
\input{tex_out/sprs.tex}
-\chapter{Arithmetic Mode}
+\chapter{Arithmetic Mode}\hypertarget{svux2fnormal}{}
\input{tex_out/normal.tex}
-\chapter{Load/Store Mode}
+\chapter{Load/Store Mode}\hypertarget{svux2fldst}{}
\input{tex_out/ldst.tex}
-\chapter{Condition Register Fields Mode}
+\chapter{Condition Register Fields Mode}\hypertarget{svux2fcr_ops}{}
\input{tex_out/cr_ops.tex}
-\chapter{Branch Mode}
+\chapter{Branch Mode}\hypertarget{svux2fbranches}{}
\input{tex_out/branches.tex}
-\chapter{setvl instruction}
+\chapter{setvl instruction}\hypertarget{svux2fsetvl}{}
\input{tex_out/setvl.tex}
-\chapter{svstep instruction}
+\chapter{svstep instruction}\hypertarget{svux2fsvstep}{}
\input{tex_out/svstep.tex}
-\chapter{REMAP subsystem}
+\chapter{REMAP subsystem}\hypertarget{svux2fremap}{}
\input{tex_out/remap.tex}
-\chapter{Swizzle Move}
+\chapter{Swizzle Move}\hypertarget{svux2fmv.swizzle}{}
\input{tex_out/mv_swizzle.tex}
-\chapter{Pack / Unpack}
+\chapter{Pack / Unpack}\hypertarget{svux2fmv.vec}{}
\input{tex_out/mv_vec.tex}
\begin{appendices}
-\chapter{SVP64 Appendix}\hypertarget{svp64ux2fappendix}{SVP64 Appendix}
+\chapter{SVP64 Appendix}\hypertarget{svp64ux2fappendix}{}
+\hypertarget{svux2fsvp64ux2fappendix}{}
\input{tex_out/svp64_appendix.tex}
-\chapter{SVP64 Quirks}
+\chapter{SVP64 Quirks}\hypertarget{svux2fsvp64_quirks}{}
\input{tex_out/svp64_quirks.tex}
-\chapter{Simple-V pseudocode}
+\chapter{REMAP algorithms}\hypertarget{svux2fremapux2fappendix}{}
+\input{tex_out/remap_appendix.tex}
+\chapter{Simple-V pseudocode}\hypertarget{svux2fpseudocode_simplev}{}
\input{tex_out/pseudocode_simplev.tex}
-\chapter{SVP64 Augmentation Table}
+\chapter{Simple-V Analysis}\hypertarget{svux2fsv_analysis}{}
+\input{tex_out/sv_analysis.tex}
+
+\chapter{SVP64 Augmentation Table}\hypertarget{opcode_regs_deduped}{}
\begin{landscape}
{
\fontsize{7}{9}\selectfont
\input{tex_out/opcode_regs_deduped.tex}
}
\end{landscape}
+
\end{appendices}
+% Part III
+\part{Scalar Instructions}
+
+\chapter*{Preamble}{}
+
+As explained in the Simple-V introduction
+these are all intentionally and specifically Scalar instructions.
+Each section is free-standing, has no connection, dependence or
+relationship to any other section, including no direct critical dependence
+either way on Simple-V.
+They have with almost no exceptions been specifically crafted to
+have a justification for their inclusion in the Power ISA as Scalar
+instructions purely on their own merit.
+
+\begin{itemize}
+ \item The biginteger multiply-and-add instruction is similar
+ to Intel's mulx in that it produces a pair of results.
+ \item Javascript(tm) rounding is present in ARM as fjcvtzs
+ and would save an astounding 35 instructions with 5 branches.
+ \item Whilst there exist CR bit manipulation and copying
+ instructions there are no CR Field manipulation instructions,
+ putting pressure on GPRs if several CR fits need to be analysed.
+ \item one single instruction, bmask, is proposed that covers
+ the whole of x86 BMI1 and AMD TBM, combined, and provides more.
+\end{itemize}
+
+All of these have nothing to do with Simple-V at all: they make
+the Power ISA better at modern general-purpose compute, bringing
+it up-to-date.
+
+That said: by a wonderful coincidence, should they be included, then
+Simple-V's capabilities increase significantly. For example the CRweird
+instructions combined with the bitmanip instructions, alongside
+Vectorised Rc=1 turn CR Fields into
+extremely powerful Predicate masks. bmask not only
+covers the BMI and TBM instructions of Intel and AMD it also
+includes the RVV set-before-first and set-after-first instructions.
+
+The clean and clear separation between Vectorisation Prefix and Scalar
+Suffix is what makes it possible for both Scalar-only and Scalable-Vectors
+to benefit. It also makes proposal much easier, as there is no
+inter-dependence.
+
+It is however important to note that the rationale for these instructions
+comes from a more general-purpose modern computing paradigm that is
+outside of IBM's much more focussed and specialist traditional customer
+base. We deeply respect IBM's curator role of the Power ISA of the past 25
+years as much as we appreciate their courage in transferring that role
+to the OpenPOWER Foundation ISA Working Group.
+
+\chapter{SV Vector-assist Scalar ops}\hypertarget{svux2fvector_ops}{}
+\input{tex_out/vector_ops.tex}
+\chapter{CR Weird ops}\hypertarget{svux2fcr_int_predication}{}
+\hypertarget{cr_int_predication}{}
+\input{tex_out/cr_int_predication.tex}
+\chapter{Bitmanip ops}\hypertarget{svux2fbitmanip}{}
+\input{tex_out/bitmanip.tex}
+\chapter{FP/Int Conversion ops}\hypertarget{svux2fint_fp_mv}{}
+\input{tex_out/int_fp_mv.tex}
+\chapter{FP Class ops}\hypertarget{svux2ffclass}{}
+\input{tex_out/fclass.tex}
+\chapter{Audio and Video Opcodes}\hypertarget{svux2fav_opcodes}{}
+\hypertarget{av_opcodes}{}
+\input{tex_out/av_opcodes.tex}
+\chapter{Big Integer}\hypertarget{svux2fbiginteger}{}
+\input{tex_out/big_integer.tex}
+\chapter{Transcendentals}\hypertarget{transcendentals}{}
+\input{tex_out/transcendentals.tex}
+%\chapter{Acquire/Release Atomic Memory}\hypertarget{atomics}{}
+%\input{tex_out/atomics.tex}
+
+\begin{appendices}
+\chapter{Big Integer Analysis}\hypertarget{svux2fbigintegerux2fanalysis}{}
+\input{tex_out/big_integer_analysis.tex}
+\chapter{Bitmanip pseudocode}\hypertarget{svux2fpseudocode_bitmanip}{}
+\input{tex_out/pseudocode_bitmanip.tex}
+\chapter{Floating Point pseudocode}\hypertarget{isaux2fsvfparith}{}
+\input{tex_out/pseudocode_svfparith.tex}
+\chapter{Fixed Point pseudocode}
+\hypertarget{isaux2fsvfixedarith}{}
+\input{tex_out/pseudocode_svfixedarith.tex}
+\end{appendices}
+
+% Part IV
+\part{Scalar Power ISA pseudocode}
+\backmatter % temporary fix for too many appenfices
+%\setcounter{chapter}{0}
+%\renewcommand{\thechapter}{\Alph{chapter}}
+
+\chapter*{Preamble}
+\addcontentsline{toc}{chapter}{Preamble} \markboth{INTRODUCTION}{}
+
+This section contains updated pseudocode from the Power ISA Specification
+v3.0B to be executable. Several bugfixes in Power ISA v3.0B have been
+found and reported as a direct result due to actually running the
+pseudocode as executable code in a Simulator.
+A Formal Correctness Proof Research Paper written by Boris
+Shingarov.
+
+Additionally, with SVP64 performing element-width over-rides it is the
+\textit{Scalar} pseudocode that needs adapting to variable-length
+(\textbf{XLEN}). Maintaining duplicate identical copies in every
+respect \textit{except} for an XLEN as part of the Simple-V Specification
+is completely pointless and a waste of time: the updates to include
+XLEN need to be part
+of the Scalar Power ISA Specification. This has the added benefit
+that it makes life much easier for 32-bit implementors, and has an
+additional benefit of making it possible for the Scalar Power ISA
+to extend to 128-bit in future (like RV128).
+
+\begin{appendices}
+\chapter{Binary Coded Decimal pseudocode}
+\hypertarget{svux2fpseudocode_bcd}{}
+\input{tex_out/pseudocode_bcd.tex}
+\chapter{Branch pseudocode}
+\hypertarget{openpowerux2fisaux2fbranch}{}
+\hypertarget{svux2fpseudocode_branch}{}
+\input{tex_out/pseudocode_branch.tex}
+\chapter{Fixed Point Compare pseudocode}
+\hypertarget{svux2fpseudocode_comparefixed}{}
+\input{tex_out/pseudocode_comparefixed.tex}
+\chapter{Condition Register pseudocode}
+\hypertarget{svux2fpseudocode_condition}{}
+\input{tex_out/pseudocode_condition.tex}
+
+\chapter{Fixed Point Arithmetic pseudocode}
+\hypertarget{svux2fpseudocode_fixedarith}{}
+\input{tex_out/pseudocode_fixedarith.tex}
+\chapter{Fixed Point Load pseudocode}
+\hypertarget{svux2fpseudocode_fixedload}{}
+\input{tex_out/pseudocode_fixedload.tex}
+\chapter{Fixed Point Logical pseudocode}
+\hypertarget{svux2fpseudocode_fixedlogical}{}
+\input{tex_out/pseudocode_fixedlogical.tex}
+\chapter{Fixed Point Rotate pseudocode}
+\hypertarget{svux2fpseudocode_fixedshift}{}
+\input{tex_out/pseudocode_fixedshift.tex}
+
+\chapter{Fixed Point Store pseudocode}
+\hypertarget{svux2fpseudocode_fixedstore}{}
+\input{tex_out/pseudocode_fixedstore.tex}
+\chapter{Fixed Point Trap pseudocode}
+\hypertarget{svux2fpseudocode_fixedtrap}{}
+\input{tex_out/pseudocode_fixedtrap.tex}
+\chapter{Special Purpose Register pseudocode}
+\hypertarget{svux2fpseudocode_sprset}{}
+\input{tex_out/pseudocode_sprset.tex}
+\chapter{String Load/Store pseudocode}
+\hypertarget{svux2fpseudocode_stringldst}{}
+\input{tex_out/pseudocode_stringldst.tex}
+\chapter{System Call pseudocode}
+\hypertarget{svux2fpseudocode_system}{}
+\input{tex_out/pseudocode_system.tex}
+
+\chapter{Floating Point Load pseudocode}
+\hypertarget{svux2fpseudocode_fpload}{}
+\input{tex_out/pseudocode_fpload.tex}
+\chapter{Floating Point Store pseudocode}
+\hypertarget{svux2fpseudocode_fpstore}{}
+\input{tex_out/pseudocode_fpstore.tex}
+\chapter{Floating Point Move pseudocode}
+\hypertarget{svux2fpseudocode_fpmove}{}
+\input{tex_out/pseudocode_fpmove.tex}
+\chapter{Floating Point Arithmetic pseudocode}
+\hypertarget{svux2fpseudocode_fparith}{}
+\input{tex_out/pseudocode_fparith.tex}
+\chapter{Floating Point Integer Conversion pseudocode}
+\hypertarget{svux2fpseudocode_fpcvt}{}
+\input{tex_out/pseudocode_fpcvt.tex}
+
+\end{appendices}
+
+
+
+
\end{document}