* <https://bugs.libre-soc.org/show_bug.cgi?id=571>
* <https://llvm.org/devmtg/2016-11/Slides/Emerson-ScalableVectorizationinLLVMIR.pdf>
* <https://github.com/riscv/riscv-v-spec/blob/master/v-spec.adoc#vector-loads-and-stores>
+* [[simple_v_extension/specification/ld.x]]
+
+# Rationale
+
+All Vector ISAs dating back fifty years have extensive and comprehensive
+Load and Store operations that go far beyond the capabilities of Scalar
+RISC or CISC processors, yet at their heart on an individual element
+basis may be found to be no different from RISC Scalar equivalents.
+
+The resource savings from Vector LD/ST are significant and stem from
+the fact that one single instruction can trigger a dozen (or in some
+microarchitectures such as Cray or NEC SX Aurora) hundreds of element-level Memory accesses.
+
+Additionally, and simply: if the Arithmetic side of an ISA supports
+Vector Operations, then in order to keep the ALUs 100% occupied the
+Memory infrastructure (and the ISA itself) correspondingly needs Vector
+Memory Operations as well.
+
+Vectorised Load and Store also presents an extra dimension (literally)
+which creates scenarios unique to Vector applications, that a Scalar
+(and even a SIMD) ISA simply never encounters. SVP64 endeavours to
+add such modes without changing the behaviour of the underlying Base
+(Scalar) v3.0B operations.
+
+# Modes overview
Vectorisation of Load and Store requires creation, from scalar operations,
-a number of different types:
+a number of different modes:
-* fixed stride (contiguous sequence with no gaps)
+* fixed stride (contiguous sequence with no gaps) aka "unit" stride
* element strided (sequential but regularly offset, with gaps)
* vector indexed (vector of base addresses and vector of offsets)
-* fail-first on the same (where it makes sense to do so)
+* Speculative fail-first (where it makes sense to do so)
+* Structure Packing (covered in SV by [[sv/remap]]).
+
+Also included in SVP64 LD/ST is both signed and unsigned Saturation,
+as well as Element-width overrides and Twin-Predication.
+
+# Vectorisation of Scalar Power ISA v3.0B
OpenPOWER Load/Store operations may be seen from [[isa/fixedload]] and
[[isa/fixedstore]] pseudocode to be of the form:
vector.
Thus we can see that Vector Indexed may be covered, and, as demonstrated
-with the pseudocode below, the immediate can be set to the element width
-in order to give unit or element stride. With there being no way to tell which from the Scalar opcode, the choice is provided instead by the SV Context.
+with the pseudocode below, the immediate can be used to give unit stride or element stride. With there being no way to tell which from the OpenPOWER v3.0B Scalar opcode alone, the choice is provided instead by the SV Context.
# LD not VLD! format - ldop RT, immed(RA)
# op_width: lb=1, lh=2, lw=4, ld=8
- op_load(RT, RA, op_width, immed, svctx, RAupdate):
+ op_load(RT, RA, RC, op_width, immed, svctx, RAupdate):
ps = get_pred_val(FALSE, RA); # predication on src
pd = get_pred_val(FALSE, RT); # ... AND on dest
for (i=0, j=0, u=0; i < VL && j < VL;):
if (RA.isvec) while (!(ps & 1<<i)) i++;
if (RAupdate.isvec) while (!(ps & 1<<u)) u++;
if (RT.isvec) while (!(pd & 1<<j)) j++;
- if svctx.ldstmode == elementstride:
+ if svctx.ldstmode == shifted: # for FFT/DCT
+ # FFT/DCT shifted mode
+ if (RA.isvec)
+ srcbase = ireg[RA+i]
+ else
+ srcbase = ireg[RA]
+ offs = (i * immed) << RC
+ elif svctx.ldstmode == elementstride:
# element stride mode
srcbase = ireg[RA]
- offs = i * immed
+ offs = i * immed # j*immed for a ST
elif svctx.ldstmode == unitstride:
# unit stride mode
srcbase = ireg[RA]
- offs = i * op_width
+ offs = immed + (i * op_width) # j*op_width for ST
elif RA.isvec:
# quirky Vector indexed mode but with an immediate
srcbase = ireg[RA+i]
if (RAupdate.isvec) u++;
if (RT.isvec) j++;
+ # reverses the bitorder up to "width" bits
+ def bitrev(val, VL):
+ width = log2(VL)
+ result = 0
+ for _ in range(width):
+ result = (result << 1) | (val & 1)
+ val >>= 1
+ return result
+
Indexed LD is:
# format: ldop RT, RA, RB
if (RAupdate.isvec) while (!(ps & 1<<u)) u++;
if (RB.isvec) while (!(ps & 1<<k)) k++;
if (RT.isvec) while (!(pd & 1<<j)) j++;
- EA = ireg[RA+i] + ireg[RB+k] # indexed address
+ if svctx.ldstmode == elementstride:
+ EA = ireg[RA] + ireg[RB]*j # register-strided
+ else
+ EA = ireg[RA+i] + ireg[RB+k] # indexed address
if RAupdate: ireg[RAupdate+u] = EA
ireg[RT+j] <= MEM[EA];
if (!RT.isvec)
break # destination scalar, end immediately
- if (!RA.isvec && !RB.isvec)
- break # scalar-scalar
+ if svctx.ldstmode != elementstride:
+ if (!RA.isvec && !RB.isvec)
+ break # scalar-scalar
if (RA.isvec) i++;
if (RAupdate.isvec) u++;
if (RB.isvec) k++;
if (RT.isvec) j++;
-Note in both cases that [[sv/svp64]] allows RA in "update" mode (`ldux`) to be effectively a completely different register from RA-as-a-source. This because there is room in svp64 to extend RA-as-src as well as RA-as-dest, both independently as scalar or vector *and* independently extending their range.
+Note in both cases that [[sv/svp64]] allows RA-as-a-dest in "update" mode (`ldux`) to be effectively a *completely different* register from RA-as-a-source. This because there is room in svp64 to extend RA-as-src as well as RA-as-dest, both independently as scalar or vector *and* independently extending their range.
# Determining the LD/ST Modes
A minor complication (caused by the retro-fitting of modern Vector
features to a Scalar ISA) is that certain features do not exactly make
sense or are considered a security risk. Fail-first on Vector Indexed
-allows attackers to probe large numbers of pages from userspace, where
+would allow attackers to probe large numbers of pages from userspace, where
strided fail-first (by creating contiguous sequential LDs) does not.
In addition, reduce mode makes no sense, and for LD/ST with immediates
- Vector source RA makes no sense either. Realistically we need
-an alternative table meaning for [[sv/svp64]] mode.
+ Vector source RA makes no sense either (or, is a quirk). Realistically we need
+an alternative table meaning for [[sv/svp64]] mode. The following modes make sense:
* saturation
-* predicate-result
+* predicate-result (mostly for cache-inhibited LD/ST)
* normal
-* fail-first, where vector source on RA or RB is banned
-
-The table for [[sv/svp64] for immed(RA) is:
-
-| 0-1 | 2 | 3 4 | description |
-| --- | --- |---------|-------------------------- |
-| 00 | str | sz dz | normal mode |
-| 01 | inv | CR-bit | Rc=1: ffirst CR sel |
-| 01 | inv | str RC1 | Rc=0: ffirst z/nonz |
-| 10 | N | sz str | sat mode: N=0/1 u/s |
-| 11 | inv | CR-bit | Rc=1: pred-result CR sel |
-| 11 | inv | str RC1 | Rc=0: pred-result z/nonz |
-
-The `str` bit is only relevant when `RA.isvec` is clear: this indicates
+* fail-first (where Vector Indexed is banned)
+* Signed Effective Address computation (Vector Indexed only)
+
+Also, given that FFT, DCT and other related algorithms
+are of such high importance in so many areas of Computer
+Science, a special "shift" mode has been added which
+allows part of the immediate to be used instead as RC, a register
+which shifts the immediate `DS << GPR(RC)`.
+
+The table for [[sv/svp64]] for `immed(RA)` is:
+
+| 0-1 | 2 | 3 4 | description |
+| --- | --- |---------|--------------------------- |
+| 00 | 0 | zz els | normal mode |
+| 00 | 1 | zz shf | shift mode |
+| 01 | inv | CR-bit | Rc=1: ffirst CR sel |
+| 01 | inv | els RC1 | Rc=0: ffirst z/nonz |
+| 10 | N | zz els | sat mode: N=0/1 u/s |
+| 11 | inv | CR-bit | Rc=1: pred-result CR sel |
+| 11 | inv | els RC1 | Rc=0: pred-result z/nonz |
+
+The `els` bit is only relevant when `RA.isvec` is clear: this indicates
whether stride is unit or element:
- if RA.isvec:
+ if bitreversed:
+ svctx.ldstmode = bitreversed
+ elif RA.isvec:
svctx.ldstmode = indexed
- elif str == 0:
+ elif els == 0:
svctx.ldstmode = unitstride
- else:
+ elif immediate != 0:
svctx.ldstmode = elementstride
-The modes for RA+RB indexed version are slightly different:
+An immediate of zero is a safety-valve to allow `LD-VSPLAT`:
+in effect the multiplication of the immediate-offset by zero results
+in reading from the exact same memory location.
+
+For `LD-VSPLAT`, on non-cache-inhibited Loads, the read can occur
+just the once and be copied, rather than hitting the Data Cache
+multiple times with the same memory read at the same location.
+This would allow for memory-mapped peripherals to have multiple
+data values read in quick succession and stored in sequentially
+numbered registers.
+
+For non-cache-inhibited ST from a vector source onto a scalar
+destination: with the Vector
+loop effectively creating multiple memory writes to the same location,
+we can deduce that the last of these will be the "successful" one. Thus,
+implementations are free and clear to optimise out the overwriting STs,
+leaving just the last one as the "winner". Bear in mind that predicate
+masks will skip some elements (in source non-zeroing mode).
+Cache-inhibited ST operations on the other hand **MUST** write out
+a Vector source multiple successive times to the exact same Scalar
+destination.
+
+Note that there are no immediate versions of cache-inhibited LD/ST.
+
+The modes for `RA+RB` indexed version are slightly different:
| 0-1 | 2 | 3 4 | description |
| --- | --- |---------|-------------------------- |
-| 00 | 0 | sz dz | normal mode |
-| 00 | rsv | rsvd | reserved |
-| 01 | inv | CR-bit | Rc=1: ffirst CR sel |
-| 01 | inv | sz RC1 | Rc=0: ffirst z/nonz |
-| 10 | N | sz dz | sat mode: N=0/1 u/s |
+| 00 | SEA | dz sz | normal mode |
+| 01 | SEA | dz sz | Strided (scalar only source) |
+| 10 | N | dz sz | sat mode: N=0/1 u/s |
| 11 | inv | CR-bit | Rc=1: pred-result CR sel |
-| 11 | inv | sz RC1 | Rc=0: pred-result z/nonz |
+| 11 | inv | zz RC1 | Rc=0: pred-result z/nonz |
+
+Vector Indexed Strided Mode is qualified as follows:
+
+ if mode = 0b01 and !RA.isvec and !RB.isvec:
+ svctx.ldstmode = elementstride
A summary of the effect of Vectorisation of src or dest:
imm(RA) RT.v RA.v no stride allowed
- imm(RA) RY.s RA.v no stride allowed
- imm(RA) RT.v RA.s stride-select needed
+ imm(RA) RT.s RA.v no stride allowed
+ imm(RA) RT.v RA.s stride-select allowed
imm(RA) RT.s RA.s not vectorised
- RA,RB RT.v RA/RB.v ffirst banned
- RA,RB RT.s RA/RB.v ffirst banned
- RA,RB RT.v RA/RB.s VSPLAT possible
- RA,RB RT.s RA/RB.s not vectorised
+ RA,RB RT.v {RA|RB}.v UNDEFINED
+ RA,RB RT.s {RA|RB}.v UNDEFINED
+ RA,RB RT.v {RA&RB}.s VSPLAT possible. stride selectable
+ RA,RB RT.s {RA&RB}.s not vectorised
+
+Signed Effective Address computation is only relevant for
+Vector Indexed Mode, when elwidth overrides are applied.
+The source override applies to RB, and before adding to
+RA in order to calculate the Effective Address, if SEA is
+set RB is sign-extended from elwidth bits to the full 64
+bits. For other Modes (ffirst, saturate),
+all EA computation with elwidth overrides is unsigned.
Note that cache-inhibited LD/ST (`ldcix`) when VSPLAT is activated will perform **multiple** LD/ST operations, sequentially. `ldcix` even with scalar src will read the same memory location *multiple times*, storing the result in successive Vector destination registers. This because the cache-inhibit instructions are used to read and write memory-mapped peripherals.
-
-# LOAD/STORE Elwidths <a name="ldst"></a>
+If a genuine cache-inhibited LD-VSPLAT is required then a *scalar*
+cache-inhibited LD should be performed, followed by a VSPLAT-augmented mv.
+
+## LD/ST ffirst
+
+LD/ST ffirst treats the first LD/ST in a vector (element 0) as an
+ordinary one. Exceptions occur "as normal". However for elements 1
+and above, if an exception would occur, then VL is **truncated** to the
+previous element: the exception is **not** then raised because the
+LD/ST was effectively speculative.
+
+ffirst LD/ST to multiple pages via a Vectorised Index base is considered a security risk due to the abuse of probing multiple pages in rapid succession and getting feedback on which pages would fail. Therefore Vector Indexed LD/ST is prohibited entirely, and the Mode bit instead used for element-strided LD/ST. See <https://bugs.libre-soc.org/show_bug.cgi?id=561>
+
+ for(i = 0; i < VL; i++)
+ reg[rt + i] = mem[reg[ra] + i * reg[rb]];
+
+High security implementations where any kind of speculative probing
+of memory pages is considered a risk should take advantage of the fact that
+implementations may truncate VL at any point, without requiring software
+to be rewritten and made non-portable. Such implementations may choose
+to *always* set VL=1 which will have the effect of terminating any
+speculative probing (and also adversely affect performance), but will
+at least not require applications to be rewritten.
+
+Low-performance simpler hardware implementations may
+choose (always) to also set VL=1 as the bare minimum compliant implementation of
+LD/ST Fail-First. It is however critically important to remember that
+the first element LD/ST **MUST** be treated as an ordinary LD/ST, i.e.
+**MUST** raise exceptions exactly like an ordinary LD/ST.
+
+For ffirst LD/STs, VL may be truncated arbitrarily to a nonzero value for any implementation-specific reason. For example: it is perfectly reasonable for implementations to alter VL when ffirst LD or ST operations are initiated on a nonaligned boundary, such that within a loop the subsequent iteration of that loop begins subsequent ffirst LD/ST operations on an aligned boundary
+such as the beginning of a cache line, or beginning of a Virtual Memory
+page. Likewise, to reduce workloads or balance resources.
+
+Vertical-First Mode is slightly strange in that only one element
+at a time is ever executed anyway. Given that programmers may
+legitimately choose to alter srcstep and dststep in non-sequential
+order as part of explicit loops, it is neither possible nor
+safe to make speculative assumptions about future LD/STs.
+Therefore, Fail-First LD/ST in Vertical-First is `UNDEFINED`.
+This is very different from Arithmetic (Data-dependent) FFirst
+where Vertical-First Mode is deterministic, not speculative.
+
+# LOAD/STORE Elwidths <a name="elwidth"></a>
Loads and Stores are almost unique in that the OpenPOWER Scalar ISA
provides a width for the operation (lb, lh, lw, ld). Only `extsb` and
*three* widths involved:
* operation width (lb=8, lh=16, lw=32, ld=64)
-s src elelent width override
+* src elelent width override
* destination element width override
Some care is therefore needed to express and make clear the transformations,
augmentation. This is primarily down to quirks surrounding LE/BE and
byte-reversal in OpenPOWER.
+It is unfortunately possible to request an elwidth override on the memory side which
+does not mesh with the operation width: these result in `UNDEFINED`
+behaviour. The reason is that the effect of attempting a 64-bit `sv.ld`
+operation with a source elwidth override of 8/16/32 would result in
+overlapping memory requests, particularly on unit and element strided
+operations. Thus it is `UNDEFINED` when the elwidth is smaller than
+the memory operation width. Examples include `sv.lw/sw=16/els` which
+requests (overlapping) 4-byte memory reads offset from
+each other at 2-byte intervals. Store likewise is also `UNDEFINED`
+where the dest elwidth override is less than the operation width.
+
Note the following regarding the pseudocode to follow:
* `scalar identity behaviour` SV Context parameter conditions turn this
if (bytereverse):
memread = byteswap(memread, op_width)
-
# check saturation.
if svpctx.saturation_mode:
... saturation adjustment...
Thus we do not need to provide specialist LD/ST "Structure Packed" opcodes
because the generic abstracted concept of "Remapping", when applied to
LD/ST, will give that same capability, with far more flexibility.
+
+# notes from lxo
+
+this section covers assembly notation for the immediate and indexed LD/ST.
+the summary is that in immediate mode for LD it is not clear that if the
+destination register is Vectorised `RT.v` but the source `imm(RA)` is scalar
+the memory being read is *still a vector load*, known as "unit or element strides".
+
+This anomaly is made clear with the following notation:
+
+ sv.ld RT.v, imm(RA).v
+
+The following notation, although technically correct due to being implicitly identical to the above, is prohibited and is a syntax error:
+
+ sv.ld RT.v, imm(RA)
+
+Notes taken from IRC conversation
+
+ <lxo> sv.ld r#.v, ofst(r#).v -> the whole vector is at ofst+r#
+ <lxo> sv.ld r#.v, ofst(r#.v) -> r# is a vector of addresses
+ <lxo> similarly sv.ldx r#.v, r#, r#.v -> whole vector at r#+r#
+ <lxo> whereas sv.ldx r#.v, r#.v, r# -> vector of addresses
+ <lxo> point being, you take an operand with the "m" constraint (or other memory-operand constraints), append .v to it and you're done addressing the in-memory vector
+ <lxo> as in asm ("sv.ld1 %0.v, %1.v" : "=r"(vec_in_reg) : "m"(vec_in_mem));
+ <lxo> (and ld%U1 got mangled into underline; %U expands to x if the address is a sum of registers
+
+permutations of vector selection, to identify above asm-syntax:
+
+ imm(RA) RT.v RA.v nonstrided
+ sv.ld r#.v, ofst(r#2.v) -> r#2 is a vector of addresses
+ mem@ 0+r#2 offs+(r#2+1) offs+(r#2+2)
+ destreg r# r#+1 r#+2
+ imm(RA) RT.s RA.v nonstrided
+ sv.ld r#, ofst(r#2.v) -> r#2 is a vector of addresses
+ (dest r# is scalar) -> VSELECT mode
+ imm(RA) RT.v RA.s fixed stride: unit or element
+ sv.ld r#.v, ofst(r#2).v -> whole vector is at ofst+r#2
+ mem@r#2 +0 +1 +2
+ destreg r# r#+1 r#+2
+ sv.ld/els r#.v, ofst(r#2).v -> vector at ofst*elidx+r#2
+ mem@r#2 +0 ... +offs ... +offs*2
+ destreg r# r#+1 r#+2
+ imm(RA) RT.s RA.s not vectorised
+ sv.ld r#, ofst(r#2)
+
+indexed mode:
+
+ RA,RB RT.v RA.v RB.v
+ sv.ldx r#.v, r#2, r#3.v -> whole vector at r#2+r#3
+ RA,RB RT.v RA.s RB.v
+ sv.ldx r#.v, r#2.v, r#3.v -> whole vector at r#2+r#3
+ RA,RB RT.v RA.v RB.s
+ sv.ldx r#.v, r#2.v, r#3 -> vector of addresses
+ RA,RB RT.v RA.s RB.s
+ sv.ldx r#.v, r#2, r#3 -> VSPLAT mode
+ RA,RB RT.s RA.v RB.v
+ RA,RB RT.s RA.s RB.v
+ RA,RB RT.s RA.v RB.s
+ RA,RB RT.s RA.s RB.s not vectorised