-Tue Nov 28 13:38:26 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+1999-05-08 Felix Lee <flee@cygnus.com>
- * configure{,.in} (--enable-sim-model-issue): Instead of defining
- 0/1, define it to be MODEL_ISSUE_{PROCESS,IGNORE}.
+ * configure.in: Use AC_EXEEXT instead of AM_EXEEXT.
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-04-02 Keith Seitz <keiths@cygnus.com>
- * std-config.h (WITH_MODEL_ISSUE): Default to 0.
- (CURRENT_MODEL_ISSUE): Reference WITH_MODEL_ISSUE, and if that is
- 0, use current_model_issue.
+ * sim_calls.c (POLL_QUIT_INTERVAL): Define. Used to tweak
+ the frequency at which the poll_quit callback is called.
+ (poll_quit_count): New global.
+ (sim_io_poll_quit): Only call the poll_quit callback
+ after the specified POLL_QUIT_INTERVAL.
- * psim.c (current_model_issue): New global variable.
+1999-02-22 Jim Lemke <jlemke@cygnus.com>
- * cpu.c (cpu_create): Use CURRENT_MODEL_ISSUE > 0 instead of
- WITH_MODEL_ISSUE.
- (cpu_{init,halt}): Ditto.
- * mon.c (mon_print_info): Ditto.
- * ppc-instructions (PPC_INSN_* macros, branch handling): Ditto.
+ * dc-complex: Force expansion on all bits of field BO.
+ Previously, the least-significant (prediction) bit was ignored.
+ * ppc-instructions (conditional branches): Implement mpc860c0 option.
+ * igen.c (gen_semantics_[ch]): Setup for mpc860c0 option.
+ * psim.c (is_num, psim_options): Added parsing for mpc860c0 option.
+ * interrupts.h: Added "mpc860c0_instruction_program_interrupt".
+ * interrupts.c (program_interrupt): Added handling for above interrupt.
- * mon.c (mon_print_info): Print instructins/second if verbose > 0,
- rather than > 1.
+1999-02-01 Jim Blandy <jimb@zwingli.cygnus.com>
- * main.c (main): Set current_model_issue to MODEL_ISSUE_PROCESS if
- the -I switch is used.
- * sim_calls (sim_open): Ditto.
+ Make the simulator compatible with the MPC750. It would be nicer
+ to make this a real multi-sim, but that's more work than we have
+ time for.
+ * emul_generic.c (emul_add_tree_options): Only require strict
+ alignment if it was explicitly requested at configuration time.
+ Don't make it the default for little-endian machines.
+ * ppc-spr-table (UMMCR0, UMMCR1, UPMC1, UPMC2, USIA, UPMC3, UPMC4,
+ MMCR0, PMC1, PMC2, SIA, MMCR1, PMC3, PMC4, L2CR, ICTC, THRM1,
+ THRM2, THRM3): Plop in the MPC750 SPR registers.
+ (DABR): This is weird. This was HID5, but the PPC spec says this
+ should be DABR; why did some random processor use it for something
+ else? The HID5 entry dates back to the original checkin of the
+ simulator code in 1995, so remove it.
+ * sim_calls.c (register_names): Delete this; since the user can
+ now change GDB's list of register names dynamically, we can't
+ pretend there's a static mapping here.
+ (sim_fetch_register, sim_store_register): Call GDB's REGISTER_NAME
+ function to get the register name. That ought to be accurate.
+ However, we're changing a compile-time dependency (using the
+ REGISTER_NAMES macro) into a link- and run-time dependency
+ (calling REGISTER_NAME, which happens to be a function call on the
+ PPC).
- * ppc-instructions (model support): Add support for determining
- when we don't have enough writeback slots. Add tracing for the
- beginning of each cycle.
+1999-01-22 Jim Lemke <jlemke@cygnus.com>
-Mon Nov 27 17:46:33 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * igen.c(gen_semantics_[ch]): setup/use of new option
+ (-o mpc860c0[=n]).
+ interrupts.[ch](mpc860c0_instruction_program_interrupt): added.
+ ppc-instructions(the four branch insn groups): detect problematic br's.
+ psim.c(is_num - added, psim_options): Parse and init new option.
+ These changes are currently under #ifdef WITH_OPTION_MPC860C0.
- * mon.c: Check for whether to include sys/types.h and sys/time.h.
+1998-12-01 Ken Raeburn <raeburn@cygnus.com>
- * configure.in: Check for include files sys/types.h and
- sys/time.h.
- * configure: Regenerate.
- * config.in: Regenerate.
+ * hw_nvram.c (hw_nvram_bcd): Force value to fit in 0..99.
+
+Fri Nov 20 12:17:28 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * main.c (sim_io_poll_quit): Stub function.
+
+ * events.c (SIM_EVENTS_POLL_RATE): Define.
+ (sim_events_poll): Copy function from common/sim-events.c.
+ (event_queue_init): Copy scheduling of sim_events_poll from same.
+
+ * sim_callbacks.h, sim_calls.c (sim_io_poll_quit): New function,
+ poll the external environment.
+
+1998-11-19 Michael Meissner <meissner@cygnus.com>
+
+ * ppc-instructions (is_{NaN,inf}): Use unsigned64 to get the
+ fractional type, so that quiet NaN's aren't treated like
+ Infinities.
+
+Mon Sep 28 09:42:45 1998 Drew Moseley <dmoseley@cygnus.com>
+
+ * table.c (table_open): For cygwin hosts, we need to use the
+ return value from the read routine as the number of bytes to
+ process. This apparently is due to text-mode vs binary-mode. If
+ the mounts are done text-mode, then the size returnedby fstat()
+ may be different than the number of bytes "read" in text mode.
+
+Sun Oct 4 00:50:47 1998 Felix Lee <flee@cygnus.com>
+
+ * emul_netbsd.c (do_open): fix order-of-evaluation problem.
+ (do_close): ditto.
+ (do_fstat): ditto.
+ (do_lstat): ditto.
+
+1998-09-03 Michael Meissner <meissner@cygnus.com>
+
+ * emul_{netbsd,unix}.c: Update copyright year.
+
+Mon Jun 29 10:57:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
- * cpu.h (CONST_ATTRIBUTE): Define as __attribute__((__const__)) if
- not already defined.
- (cpu_system): Use CONST_ATTRIBUTE, so that when we're not inlining
- the world, the optimizer has a fair chance of CSE'ing function
- calls.
- (cpu_{monitor,nr,registers,model}): Ditto.
-
- * std-config.h (MODEL_INLINE): If not defined, define as 1 if
- DEFAULT_INLINE is non-zero, 0 otherwise, rather than just the
- value of DEFAULT_INLINE.
-
-Fri Nov 24 11:24:34 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * lf.h (__attribute__): If not GCC and at least 2.7.0, define as
- nothing.
- (lf_printf): Add printf __attribute__, so the compiler will
- automatically check the format string.
-
- * configure{,.in} (--enable-sim-icache): If argument is define,
- add -R to flags passed to igen.
-
- * igen.c (stdlib.h): Include if the system supplies one.
- (semantics_use_cache_struct): New global for -R flag to say
- semantics is to use the cache structure directly rather than
- putting the values into local variables.
- (first_undef, last_undef): New structures to remember names to
- #undef if -R.
- (lf_print_c_extraction): If -R and this is semantics, emit names
- as #defines pointing to the cache structure, rather than loading
- the values into local variables.
- (lf_print_c_semantic_function): If -R, #undef all of the names
- defined in lf_print_c_extraction.
- (main): Recognize -R.
-
- * idecode_fields.h (SPR_*): Redefine spr_* macros as SPR_* to
- avoid a name confict if -R passed to igen.
-
- * ppc-instructions (mfspr, mtspr): Rename spr field to SPR.
- (model_data): Add field to count the various # of CRs that the
- mtcrf instruction used.
- (model_mon_info): Return structures counting the # of CRs that the
- mtcrf instruction used.
- (branches, sync instructions): Do not call model functions if
- WITH_MODEL_ISSUE is 0.
-
- * mon.c (stdlib.h): Include if the system supplies one.
- (mon_sort_instruction_names): New function to sort instruction
- names alphabetically.
- (mon_print_info): Call qsort with mon_sort_instruction_names to
- sort instruction names. Don't abort if WITH_MODEL_ISSUE is 0.
-
- * debug.h (ITRACE): Make printf_filtered arguments type correct.
- * idecode_expression.h (CR0_COMPARE): Ditto.
- * psim.c (psim_read_register): Ditto.
-
- * igen.c (lf_print_my_prefix): Use __attribute__((__unused__)) to
- silence compiler warnings about unused automatically generated
- variables.
- (lf_print_c_extraction): Ditto.
- * idecode_expression.h (FPSCR_BEGIN): Ditto.
-
- * ppc-cache-rules: Define rules for making a bitmask for all
- registers.
-
- * ppc-instructions: Rewrite model specific functions to use the
- bitmask of the register number, instead of using the register
- pointer to get the register number, and then making the bitmask.
-
-Wed Nov 22 15:24:27 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-instructions (model_branches): Add conditional argument to
- count the number of times each type of conditional branch is used.
- (conditional branches): Pass B0 or -1 to model_branches.
- (model_mon_info): Print out conditional branch counts.
- (model-data): Add support for printing out conditional branch
- types.
-
-Tue Nov 21 16:31:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * igen.c (insn_table_load_insns): Add support for model-static for
- internal functions that should not be inlined.
- (lf_print_c_semantic): Remove model_cleanup.
- (gen_model_{c,h}): Ditto.
-
- * ppc-instructions: Redo model specific support once again. Add
- floating point support to the model specific information. Flesh
- out all of the floating mutiply add/subtract instructions. Add
- better tracing support to the model specific information.
-
-Sun Nov 19 23:00:52 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-instructions (model data, model_busy): Rather than using a
- bit mask for the busy units, just use a char array. Also, only
- support 2 function units an insn can use, rather than a loop.
-
-Fri Nov 17 14:08:08 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * table.c (table_entry_read): Move setting entry->line_nr to after
- the model specific fields so the line numbers for the annex are
- correct.
-
- * cpu.c (cpu_{create,init,halt}): Check for WITH_MODEL_ISSUE
- before calling the model functions.
-
- * debug.c (trace_descriptor): Add trace_model support.
- * debug.h (trace_options): Ditto.
-
- * igen.c (gen_icache_h): Create type idecode_cache as void if not
- caching instructions.
- (gen_model_{c,h}): Drop model_issue support. Add support for
- model_cleanup.
- (lf_print_my_prefix): Initialize a const itable_index with the
- current index.
- (lf_print_c_semantic): Call model_cleanup at the end of the
- function to check for instructions that aren't supported yet by
- the scheduling code.
-
- * mon.h (count_type): New type for counters.
- * mon.c: Use count_type instead of unsigned.
-
- * ppc-instructions: Redo scheduling code once again. Make it all
- inline friendly. Instead of having general code emitted by igen,
- go the route of having each semantic routine call the appropriate
- module.
-
-Thu Nov 16 09:52:26 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * table.c (table_entry_read): Allow the annex to have blank lines.
-
- * ppc-instructions: Change lines in model stuff that just have a
- tab to just newline. Add 601 support. Document most instructions
- in terms of model specific timing information. Drop 'FUNCTION'
- from PPC_FUNCTION_UNIT_xxx enums. Change PPC_UNIT_UNKNOWN ->
- PPC_UNIT_BAD. Add TRACE(trace_tbd) for all data cache
- instruction.s. Signal illegal instruciton if data cache block
- invalidate is issued from problem state.
-
- * igen.c (max_model_fields_len): New static to keep track of the
- max size for the model specific fields.
- (model_c_insn): Use max_model_fields_len to size fields.
- (insn_table_insert_insn): Set max_model_fields_len.
- (model_table_insert): Ditto.
- (gen_model_{c,h}): Model_issue is now called with a processor
- argument.
-
- * debug.c (trace_description): Add support for trace_tbd.
-
- * mon.c (mon_issue): Pass processor argument to model_issue.
-
- * Makefile.in: Delete all function unit support, since the newer
- table driven model support replaces it.
- * cpu.{c,h}: Ditto.
- * mon.c: Ditto.
- * inline.{c,h}: Ditto.
- * std-config.h: Ditto.
- * options.c: Ditto.
- * configure{,.in}: Ditto.
- * Makefile.in: Ditto.
- * psim.c: Ditto.
- * function_unit.{c,h}: Delete these now usused files.
-
- * std-config.h (WITH_MODEL_ISSUE): Add new macro on whether to
- trace instructions in a model specific manor.
- * options.c (print_options): Print it out.
- * configure{,.in}: Add --enable-sim-model-issue option.
- * Makefile.in: Add --enable-sim-model-issue flags.
- * igen.c (lf_print_c_semantic): Add call to mon_issue here. Check
- for WITH_MODEL_ISSUE.
- * mon.c (mon_issue): Remove call to mon_issue_here.
-
- * ppc-instructions: Move branch tracing to the actual branch
- instructions, rather than testing it in model_issue. Add code to
- code successful/unsuccessful branch predictions, and the number of
- conditional branches that fell through.
-
-Wed Nov 15 17:32:13 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * cpu.h (cpu_model): Add declaration.
-
- * cpu.c (struct _cpu): Add model_ptr to hold model specific
- information.
- (cpu_model): Return the model internal pointer.
- (cpu_{create,init,halt}): Call the appropriate model function.
-
- * inline.c (mon.c): Move include of mon.c after model.c.
-
- * mon.c (_cpu_mon): Add fields to count unaligned memory
- references.
- (mon_issue): Call model_issue, not function_unit_issue.
- (mon_{read,write}): Count # of unaligned memory accesses.
- (mon_print_info): Switch to calling model_mon_info and
- model_mon_info_free instead of function_unit version. Print out
- number of unaligned reads/writes.
-
- * {ppc-instructions,igen.c}: More global changes to add model
- specific features.
-
- * inline.{c,h}: Provide for inlining options.c.
- * options.{c,h}: Ditto.
- * std-config.h: Add OPTIONS_INLINE.
-
-Tue Nov 14 04:47:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * Makefile.in (devices.o, main.o): Update dependency.
-
- * igen.c (gen_model_h): Use correct variable in loop.
- (gen_model_c): Use strcmp, strcasecmp.
- (gen_model_c): Use EXTERN_MODEL for arrays.
- (gen_model_h): Use STATIC_MODEL for arrays.
- (lf_print_c_semantic_function_header): Delete unused function.
-
- * main.c (cpu.h): Include cpu.h to get model.h.
-
- * inline.h ({EXTERN,STATIC}_MODEL): Define.
-
-Mon Nov 13 09:14:13 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * igen.c ({insn,model}_table_fields): Spell mnemonic correctly.
- (gen_itable_h,itable_c_insn): Ditto.
- (model support): Move model support around, add support for
- model-data, model-internal. Use annex field for model-macros
- now.
-
- * configure.in (--enable-sim-inline): If --enable-sim-inline=no,
- also define INLINE as nothing.
+ * sim_calls.c (sim_fetch_register, sim_store_register):
+ return zero when nothing to do.
+
+1998-06-26 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (AC_CHECK_HEADERS): Don't check for sys/mount.h.
* configure: Regenerate.
+ * emul_{netbsd,unix}.c (toplevel): No longer try to include
+ sys/mount.h. It conflicts on Linux when gnu libc2 is used.
+
+Tue May 12 12:10:33 PDT 1998 James Ingham <jingham@leda.cygnus.com>
+
+ * Makefile.in: The run target depended on a target psim$(EXEEXT),
+ but there was no such target, only plain psim. So I changed the
+ run target to depend on psim.
+
+Sat May 2 01:10:12 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * aclocal.m4: Remove defs of AM_EXEEXT and AM_CYGWIN32. These are
+ now defined in ../common/aclocal.m4, and the double definition causes
+ problems with AC_SUBST of EXEEXT.
+ * configure: Regenerate.
+
+Wed Apr 29 15:44:52 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * aclocal.m4: new file for AM_EXEEXT macro
+ * configure.in: call AM_EXEEXT
+ * configure: regenerate with autoconf 2.12.1.
+ * Makefile.in: add EXEEXT support
- * std-config.h (INLINE): Rather than nuking INLINE, only define it
- as __inline__ if any of the INLINE flags are non-zero.
+Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
- * options.c (print_options): Print out WITH_XOR_ENDAIN.
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
-Mon Nov 13 23:03:45 1995 Andrew Cagney <cagneyhighland.com.au>
+Sun Apr 26 15:19:51 1998 Tom Tromey <tromey@cygnus.com>
- * ppc-instructions (rfi): Add missing code.
+ * acconfig.h: New file.
+ * configure.in: Reverted change of Apr 24; use sinclude again.
+ Don't call AC_C_CROSS.
- * cpu.c (cpu_get_time_base): Fix calculation of current value of
- time base register.
+Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
- * ppc-spr-table (TBL, TBU): Fix TBL/TBU entries - was confusing
- m[tf]tb with m[tf]spr.
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
- * ppc-instructions (mtspr, mfspr): Fix mttbl - wasn't storing
- lower word.
+Fri Apr 24 11:18:46 1998 Tom Tromey <tromey@cygnus.com>
-Mon Nov 13 21:35:37 1995 Andrew Cagney <cagneyhighland.com.au>
+ * Makefile.in (top_builddir): New macro.
+ (INTLLIBS): New macro.
+ (INTLDEPS): Likewise.
+ (psim): Depend on INTLDEPS; link against INTLLIBS.
+ * configure.in: Call CY_GNU_GETTEXT.
- * std-config.h (INLINE, STATIC_INLINE): Was being set to static
- inline.. Only problem being that with ppc-opcode-simple this gave
- it the chance to inline all the idecode functions with potentially
- disasterous results on a 16mb PC. For moment hobble INLINE.
+Wed Apr 22 14:28:48 1998 Michael Meissner <meissner@cygnus.com>
- * configure.in, std-config.h (WITH_SMP): Make that 5 processors by
- default ...
+ * configure: Regenerate with autoconf 2.12.1.
- * configure.in: Tweek flags passed to gcc for --with-sim-warnings.
- Firstly make them errors and secondly remove the options gcc-245
- doesn't reconize.
+Fri Mar 13 09:25:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
-Mon Nov 13 17:57:24 1995 Andrew Cagney <cagney@highland.com.au>
+ * psim.c (psim_read_register, psim_write_register): Handle updates
+ for FPSCR.
- * misc.c (zalloc), cpu.c (cpu_init), devices
- (console_io_read_buffer_callback, icu_io_read_buffer_callback,
- vm_io_read_buffer_callback), main.c (zalloc), mon.c (memset),
- sim_calls.c (zalloc) : replace bzero() with memset().
+ * registers.c (register_description): Reconize "FPSCR".
- * emul_netbsd.c (write_direntries), psim.c (psim_read_register,
- psim_write_register): replace bcopy() with memcpy().
+ * emul_netbsd.c (emul_netbsd_create): When FP available, enable
+ MSR FP exception mode. Do not enable FPSCR bits.
+ * emul_unix.c (emul_unix_create): Ditto.
+
+Tue Feb 17 12:48:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * sim_calls.c (sim_store_register, sim_fetch_register): Pass in
+ length parameter. Return -1.
+
+Mon Feb 9 14:13:14 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ppc-instructions (fdiv, fdivs): Check for divide by zero.
+ (is_invalid_zero_divide, invalid_zero_divide_operation): New
+ functions.
-Sun Nov 12 20:55:41 1995 Andrew Cagney <cagneyhighland.com.au>
+Wed Dec 10 17:38:28 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * configure.in: for --disable-sim-inline (--enable-sim-inline=no),
- force DEFAULT_INLINE to 0 rather then trusting the std
- configuration.
+ * sim_calls.c (sim_load): Do not parse PROG using buildargv, use
+ raw value instead.
-Sun Nov 12 20:55:41 1995 Andrew Cagney <cagneyhighland.com.au>
+1997-11-05 Felix Lee <flee@cygnus.com>
- * igen.c (lf_print_idecode_table, idecode_table_leaf): Fix
- generation of switch entries in tables - treat the same as
- cracking/semantic functions.
+ * emul_chirp.c: #ifdef HAVE_UNISTD_H
- * igen.c (idecode_switch_end, idecode_switch_leaf): Fix generation
- of a boolean switch statement (field zero or non-zero).
+Wed Oct 15 08:50:54 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * ppc-opcode-test-1, ppc-opcode-test-2: New files. These test the
- switch/table generation ability of igen.
+ * corefile.c (core_attach): Pad out allocated memory regions so
+ that they are always correctly aligned.
+ (struct _core_mapping, core_map_attach, core_init,
+ new_core_mapping): Change free_buffer to type void*.
- * igen.c (idecode_switch_leaf): Fix code output when a switch
- statement needs to look up a table.
+Mon Oct 6 18:09:26 1997 Michael Meissner <meissner@cygnus.com>
- * igen.c (idecode_declare_if_switch): New function called from
- gen_idecode_c - need to declare any idecode switch functions
- before they are used in idecode tables.
+ * sim_calls.c (zfree): Call free correctly.
- * igen.c (lf_print_c_cracker_function, idecode_crack_leaf,
- idecode_crack_insn): Add is_inline_function argument to code
- printing cracker functions which indicates if STATIC_IDECODE or
- STATIC_INLINE_IDECODE should be used for definition. For
- idecode_crack_insn (which implies not duplicating/expanding) don't
- declare function as inline - we assume that the only time this is
- code is generated is when things are being tested. For
- idecode_crack_leaf, make static (instead of INLINE) if the
- instructions parent is a table as function will always be called
- via a table.
+Mon Sep 29 10:05:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * igen.c (idecode_expand_if_switch): Declare as STATIC_IDECODE not
- STATIC_INLINE_IDECODE. Only the outermost idecode switch will be
- called directly, all others are called via a table.
+ * sim_calls.c (zfree): Use free, not mfree.
+ (sim_io_flush_stdoutput): Replace gdb_flush with callback ->
+ flush_stdout.
- * igen.c (lf_print_semantic_function_header, semantics_h_leaf,
- semantics_h_insn, semantics_h_function,
- lf_print_c_semantic_function, semantics_c_function): Add
- is_inline_function argument to lf_print_semantic_function_header
- to indicate if an inline or static function declaration/definition
- should be output. Depending on situtation call accordingly:
- functions (not instruction semantic routines) are always inline;
- Semantic routines are made inline when there is no icache (cache
- will contain the function address) and are duplicating (see above)
- and the parent of the instruction is a switch statement.
+Fri Sep 26 09:50:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * igen.c (opcode_field_new): Delete. Code changed to use ZALLOC
- and moved to insn_table_find_opcode_field.
+ * ppc-instructions (sraw, slw, srw): From Charles Lefurgy, Fix
+ mask extracting shift amount. Correctly condition for setting XER
+ in sraw.
+ (ldhau): From Johannes Reisinger, update rA after load.
- * table.c (table_open): Fix typo (nr_model_fields vs nr_fields).
+Tue Sep 9 22:13:23 1997 Felix Lee <flee@cygnus.com>
- * igen.c (model_c_insn): Suggestion - document the name of the
- instruction on each line of the instruction model table.
+ * basics.h (CONCAT*): token-pasting macros, if ALMOST_STDC,
+ for MSVC.
+ * words.h: __int64 instead of long long for MSVC.
-Fri Nov 10 00:44:38 1995 Andrew Cagney <cagneyhighland.com.au>
+Wed Aug 27 10:24:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * emul_netbsd.c (do_ioctl): Cleanup compilation.
+ * sim_calls.c (sim_create_inferior): Check the simulator was
+ initialized before creating inferior.
- * sim_callbacks.h (__attribute__): Only define if not defined (was
- already defined on NetBSD host).
+ * idecode_expression.h (ALU_END): From Charles Lefurgy - Extract
+ sign bit using 64 bit and not a 32 bit mask.
-Wed Nov 8 21:49:52 1995 Andrew Cagney <cagneyhighland.com.au>
+Wed Aug 27 10:15:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * std-config.h (WITH_XOR_ENDIAN), configure.in, Makefile.in: New
- macro, indicates if the PowerPC's horrible XOR endian mode should
- be suported. Add to configure and make.
+ * sim_calls.c (sim_load): From Ian Lance Taylor - free argv after
+ it has been used, not before.
+
+Tue Aug 26 10:41:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * vm_n.h (vm_data_map_read_N, vm_data_map_write_N), vm.c
- (vm_instruction_map_read): If XOR endian, xor the address
- with a value from an xor table (indexed by size of access).
+ * sim_calls.c (sim_kill): Delete.
+ (sim_create_inferior): Add ABFD argument.
+ (entry_point): Delete variable.
+ (sim_load): Move setting of PC from here.
+ (sim_create_inferior): To here.
- * vm.c (vm_synchronize_context), cpu.c (cpu_synchronize_context):
- set up xor table to xor if there is a conflict between the
- CURRENT_TARGET_ENDIAN and the endian indicated in the MSR. Move
- check of suported change of endian mode from cpu.c to vm.c.
+Mon Aug 25 16:17:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * vm.c (vm_data_map_write_buffer, vm_data_map_read_buffer):
- Hopefully added correct hack to handle XOR endian mode.
+ * sim_calls.c (sim_open): Add ABFD argument.
- FIXME: If NONSTRICT alignment and XOR ENDIAN and MSR indicates
- little endian mode, the model accepts miss aligned transfers.
+Thu Jul 3 10:18:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
- FIXME: Need to create an `init' device that, during
- initializatioin for XOR mode, it mushes (XOR address) all the dma
- data before passing it on to the core for storage. Just like the
- real thing really.
+ * ppc-instructions (PPC_INSN_INT): From Michael Thies - Monitoring
+ CR register updates dependant on RC value had logic backwards.
-Wed Nov 8 21:49:52 1995 Andrew Cagney <cagneyhighland.com.au>
+ * ppc-instructions (Load String Word Immediate): From Brad Parker
+ - sense of wrap test in check for overwriting RA wrong.
+ (Load String Word Indexed): Ditto.
+
+ * configure.in: From Erik Landry - set sim_default_model not
+ sim_model for sim-default-model option.
+ * configure: Regenerate.
+
+ * interrupts.c (check_masked_interrupts): Schedule a hardware
+ interrupt delivery when FP interrupts get enabled.
+ (program_interrupt): Generate FP exceptions instead of aborting.
+ (deliver_hardware_interrupt): Deliver a FP exception if so
+ enabled.
+
+ * registers.h: Add definition of fpscr_vx_bits.
+
+ * idecode_expression.h (FPSCR_END): Always update FEX and VX bits
+ in FPSCR.
+ (FPSCR_END): Explicitly check for possible floating point
+ exception conditions.
+ (FPSCR_BEGIN): Simplify.
+
+ * ppc-instructions (Move From FPSCR): Enable.
+ (Move To FPSCR Bit 1): Ditto.
+ (Move To FPSCR Bit 0): Ditto.
+ (Move To FPSCR Field Immediate): Ditto.
+ (Move to Condition Register from FPSCR): Simplify.
+ (invalid_arithemetic_operation): Generate a QNaN when invalid
+ operation exception disabled.
+
+Tue May 20 10:22:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * devices.c (halt_io_write_buffer_callback): Use value written to
- halt device to determine exit status. Thus allowing
- success/failure of OEA tests.
+ * sim_calls.c (sim_open): Add callback argument.
+ (sim_set_callbacks): Delete.
-Wed Nov 8 00:10:38 1995 Andrew Cagney <cagneyhighland.com.au>
+Tue Apr 22 22:36:57 1997 Mike Meissner <meissner@cygnus.com>
- * ppc-instructions (icbi): If icache present flush it.
+ * sim_callbacks.h (error): Make declaration match gdb's.
+ * main.c (error): Ditto.
-Tue Nov 7 23:36:31 1995 Andrew Cagney <cagneyhighland.com.au>
+Fri Apr 18 17:03:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
- * devices.c (htab_init_callback): Add code to create htab/pte.
+ * sim_calls.c (sim_stop_reason): Simplify. Was running implies
+ stopped/SIGINT. Exit implies a status code.
- * devices.c (dma_file, file_init_callback, htab_init_callback):
- New function - Dma the named file into memory at the specified
- address. Use.
+ * psim.c (cntrl_c_simulation): From main.c. Event function that
+ halts the simulator.
+ (psim_stop): New. Asynchronously schedule a stop simulator event.
+ (psim_run_until_stop): Delete. Made redundant by psim_stop.
- * device_tree.h, device_tree.c (scand_*): New functions.
+ * main.c (cntrl_c): Update.
+ (cntrl_c_simulation): Moved to psim.c.
-Tue Nov 7 23:36:31 1995 Andrew Cagney <cagneyhighland.com.au>
+ * sim_calls.c (sim_stop): New function. Use psim_stop which
+ schedules a stop event.
+ (sim_resume): Drop SIGINT handler, now in gdb/main.c.
+ (sim_resume): Use psim_run as stop variable no longer needed.
- * filter_filename.c, Makefile.in: Change so that only dependant on
- a very limited nr of files. Stops an unnecessary dependency.
+Fri Apr 18 17:03:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
-Tue Nov 7 15:44:33 1995 Andrew Cagney <cagney@highland.com.au>
+ * psim.c (psim_options): Handle -E option correctly.
+ (psim_usage): Document.
- * core.c (core_map_find_mapping): Use cpu_halt rather than error
- to abort an access to an undefined address.
+Thu Apr 17 03:28:03 1997 Doug Evans <dje@canuck.cygnus.com>
-Sun Nov 12 07:58:09 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * psim.c (psim_options): Ignore -E option (sets endianness).
+ * sim_calls.c: #include bfd.h.
+ (entry_point): New static local.
+ (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
+ (sim_create_inferior): Return SIM_RC. Delete arg start_address.
- * igen.c (model_table_insert_{macro,function}): New functions.
- (insn_table_load_insns): Call them.
- (gen_model_h): Move section emiting model-macros to be first.
- (model_{c,h}_function): New functions cloned from semantic
- functions to print out the prototype and function for
- model-functions.
- (gen_model_{c,h}): Print out model-functions.
+Tue Apr 15 14:57:18 1997 Ian Lance Taylor <ian@cygnus.com>
- * ppc-instructions (model_{start,halt,print_info}): Add dummy
- model-functions.
+ * Makefile.in (INSTALL): Set to @INSTALL@.
+ (INSTALL_XFORM, INSTALL_XFORM1): Remove.
+ (install): Depend upon installdirs. Use $(program_transform_name)
+ directly, rather than using $(INSTALL_XFORM).
+ (installdirs): New target.
- * options.c (print_options): Print out WITH_{,DEFAULT_}MODEL, not
- WITH_PPC_{,DEFAULT_}_MODEL.
- (options_ppc): Delete now unused function.
- (cpu.h): Include cpu.h, not just basics.h.
+Fri Apr 4 17:54:36 1997 Jim Wilson <wilson@cygnus.com>
- * std-config.h (WITH_{,DEFAULT_}MODEL): Define.
+ * Makefile.in (tmp-hw, tmp-pk): Use for loop to eliminate duplicates
+ rather than the non-portable cat -n.
- * igen.c (model_macros, last_model_macro): New statics to keep
- track of macros to go in model.h.
- (insn_table_load_insns): Add model-macros to model_macros linked
- list.
- (model_table_fields): Add field for printable name.
- (gen_model_h): If there are model macros defined, print them out.
- Print out DEFAULT_MODEL as the first model if there any models
- specified, otherwise MODEL_NONE. Print out external decl for
- current_model. Print out decl for model_set.
- (gen_model_c): Add function model_set. Switch to use printable
- name for the model, not the internal identifier used.
+Mon Apr 14 16:29:51 1997 Ian Lance Taylor <ian@cygnus.com>
- * psim.c (current_model): New global variable.
+ * Makefile.in (INSTALL): Change install.sh to install-sh.
- * ppc-instructions: Add macros for flag defines. Switch first
- model so 604 is first.
+Tue Apr 1 18:15:14 1997 Jim Wilson <wilson@cygnus.com>
- * main.c (main): Call model_set, not function_unit_model.
- * sim_calls.c (sim_open): Ditto.
- * sim_calls.c, Makefile.in: sim_calls.c now includes cpu.h.
+ * ppc-instructions: Change milhwu to mulhwu.
-Sat Nov 11 07:27:41 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Wed Apr 2 15:38:08 1997 Doug Evans <dje@canuck.cygnus.com>
- * mon.h (mon_events): New enumeration for other events we want to
- handle.
- (mon_event): Add declaration for function.
+ * sim_calls.c (sim_open): New arg `kind'.
- * mon.c (mon_event): New function.
- (mon_print_info): Print icache misses.
+Wed Apr 2 14:51:17 1997 Ian Lance Taylor <ian@cygnus.com>
- * psim.c (run_until_stop): Monitor icache misses.
+ * COPYING: Update FSF address.
- * configure.in (--enable-sim-inline): Fix typos in handling comma
- separated inline options.
- (--enable-sim-icache): Echo icache size.
- * configure: Regenerate.
+Tue Mar 25 16:17:59 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
- * igen.c (semantics_h_print_function): Emit STATIC_SEMANTICS
- instead of INLINE_SEMANTICS so that the compiler won't keep all of
- the semantic functions as inline RTL, given that the address of
- the function is taken which forces outline calls anyway.
- (lf_print_c_semantic_function_header): Ditto.
- (gen_semantics_h): Define STATIC_SEMANTICS as nothing if not
- defined.
- (lf_print_c_cracker_function): Emit STATIC_IDECODE instead of
- STATIC_INLINE_IDECODE.
- (gen_idecode_c): Define STATIC_IDECODE if not defined.
- (gen_model_h): Use #ifdefs to define types to hold model units,
- cycles, and flags.
- (model_table_insert): Add a sentinel functional unit at the end to
- simplify loop processing.
- (model_c_insn): Use <function-unit>_SENTINAL instead of 0 for any
- instruction not specifing a function unit for the current model.
- (gen_model_{c,h}): Provide bounds for model_time_mapping.
-
- * inline.h (STATIC_SEMANTICS): Define to be static if
- SEMANTICS_INLINE is defined.
- (STATIC_IDECODE): Define to be static if IDECODE_INLINE is
- defined.
-
- * options.c (print_options): Fix typo.
-
-Fri Nov 10 06:39:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure.in (--enable-sim-{opcode,config}): Use $srcdir when
- check for the existence of files.
- * configure: Regenerate.
+ * main.c (sim_io_read_stdin): Only compile unbuffered IO code if
+ all the required features are supported by the host OS.
- * table.c (table): New field nr_model_fields.
- (table_open): New parameter nr_model_fields.
- (table_entry_read): Parse model fields that begin with a '*' after
- each instruction.
- * igen.c, dgen.c: Change callers of table_open.
-
- * igen.c: Add support for dumping model specific information in
- model.h and model.c.
- (insn_field_name): Delete unused array.
- (global variables): Make global variables static, so we can tell
- when they are no longer used.
- (cache_semantic_actual): Delete unused variable.
- (insn_table_load_insns): If the insn is really a machine model,
- call model_table_insert instead of other processing.
- (model_table_insert): New function to handle defining the
- functional units of a particular machine model.
- (insn_table): Add last_function field so we can add functions at
- the end.
- (insn_table_insert_function): Use last_function field when
- appending new function.
-
- * ppc-instructions: Add a few model specific information for 603,
- 603e, and 604 for testing purposes.
-
- * table.h (table_model_entry): New linked list to hold model
- specific information, one per line.
- (table_entry): Add model_first, model_last fields.
-
- * configure.in (--enable-sim-inline): If gcc is found and
- --enable-sim-inline is not specified, defaine DEFAULT_INLINE to 1,
- not 2.
- (--enable-sim-reserved-bits): New switch to check whether reserved
- bits are set in the instruction.
- (--enable-sim-opcode): Make complex the default.
- (all switches): Add appropriate checks and error messages.
- * configure: Regenerate.
+Tue Mar 25 12:13:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
- * Makefile.in (RESERVED_CFLAGS): New variable set by
- --enable-sim-reserved-bits.
- (CONFIG_CFLAGS): Include RESERVED_CFLAGS.
- (BUILT_SRC): igen now generates model.c and model.h.
- (LIB_OBJ): Include table.o.
- (tmp-igen): Add -m/-M options to write model.c/model.h.
- (model.o): New object.
- (CPU_H): Include model.h.
+ * emul_bugapi.c (emul_bugapi_create): Guard against NULL images.
- * cpu.h: Include model.h.
+ * configure.in (enable-sim-endain): Correct typo in usage (from
+ Erik Landry <landry@ENGR.ORST.EDU>).
+ * configure: Re-generate.
- * std-config.h (WITH_RESERVED_BITS): Define.
- (MODEL_INLINE): Ditto.
+Fri Mar 14 18:23:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
- * options.c (print_options): Print out WITH_RESERVED_BITS.
+ * Makefile.in (targ-vals.def): Re-do rule so that it works with
+ FreeBSD's make. Didn't like $<.
-Thu Nov 9 12:22:15 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Thu Mar 13 12:55:48 1997 Doug Evans <dje@canuck.cygnus.com>
- * configure.in: If --silent, don't output information messages.
- * configure: Regenerate.
+ * sim_calls.c (sim_open): New SIM_DESC result. Argument is now
+ in argv form.
+ (other sim_*): New SIM_DESC argument.
- * configure.in (--enable-sim-alignment): Fix typo in specifing non
- strict alignment.
- (--enable-sim-switch): Make default on.
- (--enable-sim-duplicate): Make default on.
- (--enable-sim-smp): Make default 0.
- (--enable-sim-mon): Don't set sim_float if not set.
- (--enable-sim-inline): If gcc is found and --enable-sim-inline is
- not specified, define DEFAULT_INLINE to be 2.
- (all --enable-sim-* rules): Echo rules set to non empty to file
- descriptor 6.
- * configure: Regenerate.
+Thu Feb 13 10:35:14 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
- * options.c (options_env): Fix typo if WITH_ENV is 0.
- (print_options): Print GCC compiler version if available and
- date/time options was compiled. If OPCODE_RULES, IGEN_FLAGS,
- and/or DGEN_FLAGS are defined, print them.
+ * ppc-opcode-simple-array, ppc-opcode-simple-goto,
+ ppc-opcode-simple-switch, ppc-opcode-complex-array,
+ ppc-opcode-complex-goto, ppc-opcode-complex-switch,
+ ppc-opcode-jump, ppc-opcode-goto, ppc-opcode-flat: Delete,
+ superseeded by --sim-decode-mechanism option.
- * Makefile.in (all link actions): Pass SIM_CFLAGS as well as
- CFLAGS.
- (options.o): Compile options.o with OPCODE_RULES, IGEN_FLAGS, and
- DGEN_FLAGS defined, so they can be printed out.
+ * ppc-opcode-simple, dc-simple: Rename to be 8.3
+ * ppc-opcode-complex, dc-complex: Ditto.
+ * ppc-opcode-stupid, dc-stupid: Ditto.
+ * ppc-opcode-test-1, dc-test.01: Ditto.
+ * ppc-opcode-test-2, dc-test.02: Ditto.
- * igen.c (lf_print_c_validate): Check for WITH_ASSERT, so that
- this test can be compiled away if the user really wants a fast
- simulator by not doing assertion failures.
+ * configure.in (--enable-sim-opcode): Change prefix to dc- instead
+ of ppc-opcode-.
-Wed Nov 8 13:19:47 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Wed Feb 12 19:33:45 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
- * options.c: New file to print out all of the WITH_ options.
- * options.h: New include file to declare print_options.
- * debug.h (trace_options): Add trace_opts to call print_options.
- * debug.c (trace_description): Add trace_opts support.
- * main.c (main): If user requested options, print them.
- * sim_calls.c (sim_open): Ditto.
+ * Many of the ppc-opcode-* files are identical baring the type of
+ lookup table. Instead of having multiple tables, igen can do this
+ via an additional option.
- * igen.c (opcode_field_new): Add void to make it a proper prototype.
+ * ld-decode.h, ld-decode.c (force_decode_gen_type): New function,
+ allow the type of generated table specified in the decode file to
+ be overridden.
- * emul_generic.c (emul_enter_call): Make printf_filtered arguments
- type correct.
- * emul_netbsd.c (do_kill): Ditto.
- * registers.c (registers_dump): Ditto.
- * vm.c (om_translate_effective_to_real): Ditto.
- * vm_n.h (vm_data_map_read_N): Ditto.
- (vm_data_map_write_N): Ditto.
- * devices.h (DTRACE_INIT): Ditto.
- (DTRACE_{ATTACH,DETACH}_ADDRESS): Ditto.
- (DTRACE_IO_{READ,WRITE}_BUFFER): Ditto.
- (DTRACE_DMA_{READ,WRITE}_BUFFER): Ditto.
- * devices.c (update_for_binary_section): Ditto.
- (write_stack_arguments): Ditto.
- (stack_ioctl_callback): Ditto.
- * device_tree.c (device_tree_add_passthrough): Ditto.
- (device_tree_{add,find}_device): Ditto.
- (device_tree_{add,find}_integer): Ditto.
- (device_tree_find_{string,boolean}): Ditto.
- (device_tree_init{,_device}): Ditto.
- (device_tree_dump): Ditto.
- * sim_calls.c (sim_{read,write}): Ditto.
- (sim_{fetch,store}_register): Ditto.
- (sim_stop_reason): Ditto.
-
- * sim_callbacks.h (printf_filtered): Declare with attribute
- printf, so we can enable format checks.
-
- * devices.c (console_io_{read,write}_buffer_callback): Cast swtich
- argument to int, since ANSI doesn't allow long switch values.
- * emul_netbsd.c (do___sysctl): Ditto.
-
- * emul_netbsd.c (do___sysctl): Fix up printf call.
-
- * corefile.c (core_translate): Don't do arithmetic with void *
- pointers. Cast to char * first.
-
- * function_unit.c (FUNC_{LOAD,STORE}): Rename from {LOAD,STORE}
- and change all uses.
-
- * Makefile.in ({FUNC,MODEL,WARNING}_CFLAGS): New flags set by
- configure --enable switches.
- (CONFIG_CFLAGS): Include FUNC_CFLAGS and MODE_CFLAGS.
- (.c.o): Include WARNING_CFLAGS.
- (CPU_H): Include function_unit.h.
- (LIB_OBJ): Include function_unit.o.
- (BUILT_SRC_WO_CONFIG): Split from BUILT_SRC and do not include
- config.h or ppc-config.h.
- (BUILT_SRC): Include BUILT_SRC_WO_CONFIG, config.h and
- ppc-config.h.
- (filter_filename.o): Include config.h/ppc-config.h dependencies.
- (idecode.o, semantics.o, psim.o): Specify CC line without
- WARNING_CFLAGS so that we don't get all of the unused variable
- warnings that are generated.
- (function_unit.o): Add rule to build.
- (main.o, sim_calls.o): Add function_unit.h, itable.h dependencies.
- (mon.o): Include mon.c dependency.
- (TAGS): Depend on BUILT_SRC.
- (clean): Don't delete config.h or ppc-config.h
-
- * basics.h (sim_callbacks.h): Move include after the include of
- config.h and ppc-config.h.
-
- * bits.{h,c} (ROTL32,ROTL64): Move these functions to bits.c. Add
- support for BITS_INLINE to inline these. Add declarations to
- bits.h.
-
- * configure.in (--enable-sim-warnings): Add new option to specify
- compiler warnings for all modules except idecode.o and semantics.o
- which have lots of unused variables because they are machine
- generated.
- (--enable-sim-function-unit): New switch to configure whether
- function unit support is compiled in or not.
- (--enable-sim-{,default-}mode): New switches to control which cpu
- model is used.
+ * ld-decode.c (load_decode_table): Allow the table type to be
+ overridden.
+
+ * igen.c (main): Add -T <mechanism> option so that an overriding
+ instruction decode mechanism can be specified.
+
+ * configure.in: New option --sim-decode-mechanism to control
+ igen's new -T <mechanism> flag.
+ * Makefile.in (IGEN_FLAGS): Add IGEN_IDECODE_MECHANISM set by the
+ configure script.
* configure: Regenerate.
+
+Tue Feb 11 13:49:10 1997 Michael Meissner <meissner@tiktok.cygnus.com>
- * corefile.c (core_attach_address_callback): Delete unused
- variable device_address.
+ * events.c (event_queue_create): Don't use NULL to initialize an
+ integer field.
+ (even_queue_{init,schedule_after_signal,tick}): Conditionalize use
+ of sigprocmask to appropriate autoconf test.
- * cpu.c (struct _cpu): Add function unit pointer field func_unit.
- (cpu_create): If WITH_FUNCTION_UNIT, call function_unit_create.
- (cpu_init): If WITH_FUNCTION_UNIT, call function_unit_init.
- (cpu_halt): If WITH_FUNCTION_UNIT, call function_unit_halt.
- (cpu_function_unit): New function to return func_unit field.
+ * main.c ({cntrl_c,main}): Use RETSIGTYPE for signal return type,
+ don't assume void.
+ * sim_calls.c (sim_{ctrl_c,resume}): Ditto.
- * cpu.h (function_unit.h): Include new include file.
- (cpu_function_unit): Declare.
+ * Makefile.in (callback.o): Define HAVE_CONFIG_H, so callback.c
+ includes our config.h.
- * debug.c (stdlib.h): Test HAVE_STDLIB_H, not HAVE_STDLIB.
- (config.h): Include config.h.
+Tue Feb 4 13:42:59 1997 Doug Evans <dje@canuck.cygnus.com>
- * devices.c (icu_io_write_buffer_callback): Delete unused variable
- system.
+ * configure.in: Fix typo in test for callback.c.
+ * configure: Regenerated.
- * emul_generic.c (emul_exit_call): Print out status value.
+Fri Feb 7 10:04:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * emul_netbsd.c (do_read): Delete unused variable nr_moved.
+ * emul_chirp.c (emul_chirp_create): Handle a virtbase of -1 being
+ found in the device tree.
- * filter_filename.h (includes): Include config.h, ppc-config.h,
- not basics.h.
+Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * inline.c: Include bits.c if BITS_INLINE. Include
- function_unit.c if FUNCTION_UNIT_INLINE.
+ * Property create/initialization still wasn't correctly ordered.
+ Should be delaying everything related to ihandle creation until
+ after the rest of the tree has been established.
+
+ * device.c (device_find_ihandle_runtime_property): Update.
+ (device_add_ihandle_runtime_property): Update.
- * inline.h (INLINE_BITS): Define if BITS_INLINE.
- (INLINE_FUNCTION_UNIT): Define if FUNCTION_UNIT_INLINE.
+ * tree.c (parse_ihandle_property): Delay lookup of the device to
+ be opened until the ihandle initialization phase.
+ * tree.c (print_properties): Update.
- * interrupts.c (instruction_storage_interrupt): Delete unused
- variable nia.
+Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * gen-icache.c (print_icache_extraction): Add a reason parameter.
+ Augment each extracted field with a comment citing the codes
+ origin. Should simplify tracking down incorrect cache
+ extractions.
- * lf.h (config.h): Include config.h.
+Tue Feb 4 17:44:51 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * main.c (includes): Include function_unit.c. If HAVE_UNISTD_H,
- include unistd.h.
- (usage): Update for -m model, -i, and -I options.
- (main): Delete unused variables stack_pointer and i. Add support
- for -i, -m model arguments. Call psim_print_info with verbose ==
- 1 if -i, and verbose == 2 if -I.
+ * gen-icache.c: Generalize code handling XXX_is_NNN so that it
+ works for normal and boolean table entries.
- * mon.c (stdio.h): Include stdio.h to pick up sprintf prototype.
- (mon_issue): Call function_unit_issue if function units are
- supported.
- (mon_print_info): Take psim * argument. Print out information
- from function_unit if available. Move read/write stats to always
- print, instead of printing if verbose > 1. Fix up plural
- vs. singular usage.
+ * psim.c (psim_write_memory): last_cpu == -1 or nr_cpus is now
+ valid. Handle this just like *_{read,write}_register now handles
+ it.
- * mon.h (mon_print_info): Update prototype.
+Mon Feb 3 17:18:16 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * psim.c (current_ppc_model): Add global variable.
- (psim_print_info): Pass system argument to mon_print_info.
+ * events.c (insert_event_entry): Correct loop termination
+ assertions.
- * sim_calls.c (function_unit.h): Include.
- (sim_open): Add support for -i and -m model options. If -i call
- psim_print_info with verbose == 1, if -I, with verbose == 2.
- (sim_resume): Delete unused variable program_counter.
+Fri Jan 31 16:20:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * std-config.h (WITH_FUNCTION_UNIT): Define.
- (ppc_model): Add enumeration giving all PowerPC models currently
- known about.
- ({WITH,CURRENT}_PPC_MODEL): Define.
- (FUNCTION_UNIT_INLINE): Define.
+ * psim.c (psim_options): Add new option -c for max-iterations or
+ count.
+ (psim_usage): Document.
+ (psim_max_iterations_exceeded): New function, abort simulation if
+ max iterations exceeded.
- * table.c (config.h): Include config.h.
+ * gen-idecode.c: Re-work the table lookup code so that it assumes
+ that the entry is a leaf by default. Simplify the boolean table
+ entry code so that it involves a mask + test instead of shift +
+ shift + mask + test.
- * vm.c (om_virtual_to_real): Print pte_word_{0,1} so the compiler
- doesn't complain that they're unused.
+ * gen-idecode.c: Correct generated igen body so that it no drops
+ or doubles clock interrupts.
- * vm_n.h (vm_data_map_read_N): Delete unused variable rval.
-Mon Nov 6 23:15:54 1995 Andrew Cagney <cagney@highland.com.au>
+Thu Jan 30 11:23:20 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * Makefile.in (BUILT_SRC_WO_CONFIG): Change targ-vals.* to
+ @sim_targ_vals@
- * sim-endian.c (ppc-endian.c), sim-endian.h (ppc-endian.h):
- renameed. These files are target independant.
- * Makefile.in, basics.h: update for new name.
+ * configure.in (sim_callback, sim_targ_vals): Set sim_targ_valls
+ if common callback is present.
- * sim-endian.h (SWAP_N), sim-endian.c (_SWAP_1): Rename existing
- SWAP_<N> to _SWAP_<N> so that sim-endian.h can contain SWAP_N
- macro's as required.
+Wed Jan 29 12:32:41 1997 Michael Meissner <meissner@tiktok.cygnus.com>
- * sim-endian.c, sim-endian-n.h (new file): Move endian code into a
- debugable header file.
+ * configure.in (sim_callback): If the gdb is post 4.16, configure
+ callback support from the common directory.
+ * configure: Regenerate.
- * ppc-instructions (Byte-Reverse): Enable byte reverse
- instructions using SWAP_N macros.
+ * Makefile.in (BUILT_SRC_WO_CONFIG): Add targ-vals.{h,def} and
+ targ-map.c.
+ (GDB_OBJ): Add callback support configured in.
+ (gentmap,targ-vals.def): Build from common directory.
+ (targ-vals.h,targ-map.c): Build by running gentmap.
+ (callback.o): Build from source in common directory.
+ (targ-map.o): Add dependency.
+ (clean): Remove gentmap.
-Mon Nov 6 10:39:28 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * Makefile.in (config.status): Remove references to config.make
- and config.hdr.
+ * igen wasn't aborting if the opcode table contained no valid
+ fields.
+
+ * misc.c (name2i): Possibly abort if an invalid name is
+ encountered.
+ * ld-decode.c: Abort if the table type isn't found.
- * config.{make,hdr}: Delete, no longer used.
- * build-psim: Ditto.
+Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Mon Nov 6 20:49:56 1995 Andrew Cagney <cagney@highland.com.au>
+ * When performance monitoring is disabled, it is still possible to
+ determine the simulation speed by looking at the number of elapsed
+ ticks recorded by the event queue.
+
+ * psim.c (psim_write_register, psim_read_register): Force the cpu
+ to zero when it is either of `-1' or `nr_cpus'. In both cases the
+ next cpu would be zero any way.
- * sim_calls.c (sim_open): Fix parsing of `target sim' options.
+ * mon.c (mon_print_info): If possible, print the system cycle
+ performance. This is an indication of the number of instructions
+ per second.
- * device_tree.c (device_tree_add_string): Wasn't saving the value
- of the string being entered into the tree.
+Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * psim.c (create_filed_device_tree): Not terminating string device
- names with a null.
+ * The code to allow an event queue to be updated during a signal
+ was missing. For main.c, a cntrl-c simulation termination wasn't
+ handled cleanly.
+
+ * The simulation would not correctly restart if an event requested
+ that the simulation be halted.
- * psim.c (psim_create): Use `env' instead of
- `environment-architecture' to be consistent with configure.
- Reconize user/uea, virtual/vea and operating/oea.
+ * psim.c (psim_options): Add hack to -i option to optionally
+ include a level vis -i2.
+ (psim_usage): Document.
+
+ * main.c (cntrl_c, cntrl_c_simulation): New functions. When a
+ cntrl-c occures schedule an event to halt the simulation.
+ (main): Catch CNTRL-C signals with the function cntrl_c.
+
+ * events.c (event_queue_process): Mask interrupts while
+ manipulating the async event queue.
+ (event_queue_init): Ditto.
+ (event_queue_schedule_after_signal): Ditto.
+
+ * events.c (event_queue_process): Mark the event queue as being in
+ the processing state when processing has started. Adjust code
+ so that it is tolerant of halts.
+ (event_queue_init): Start the event queue out with processing
+ false.
+ (event_queue_tick): Check that processing isn't still being
+ performed.
+
+ * gen-idecode.c (print_run_until_stop_body): Call
+ event_queue_process_events to clear possibly pending events before
+ starting a simulation run. Re-arange main loop so that simulator
+ is correctly restarted when an event halts the simulation.
+
+ * psim.c (psim_halt): Handle an event halting the simulation.
+ * psim.c (psim_init): Adjust initial cpu - == -1 - to match
+ reworked idecode.
-Sat Nov 4 12:29:45 1995 Fred Fish <fnf@cygnus.com>
+Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * ppc-opcode-complex: Correct typo - was expanding ORA instead of
+ RA. Based on instruction frequency stats, expand additional
+ instructions.
+ * ppc-instructions: Change all `RA == 0' to RA_is_0.
+
+ * ppc-opcode-stupid: Move all but the basic table in -complex into
+ here. Update to new format.
+
+ * Makefile.in (tmp-defines): New target. Force defines.h to always
+ be built. Hence get ppc-opcode-goto to build.
- * core.c: Rename to corefile.c
- * core.h: Rename to corefile.h
- * inline.c: Include corefile.h, renamed from core.h.
- * cpu.h: Include corefile.h, renamed from core.h
- * vm.c: Include corefile.h, renamed from core.h
- * corefile.c: Include corefile.h rather than core.h
- * README.psim (KNOWN PROBLEMS): Change core.* references to corefile.*
- references.
- * Makefile.in (CPU_H): Change core.h to corefile.h
- (vm.o): Change dependency to corefile.h
- (LIB_SRC): Change core.c to corefile.c.
- (LIB_OBJ): Change core.o to corefile.o.
- (corefile.o): Change dependencies to corefile.c, corefile.h.
+Tue Jan 28 13:00:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Fri Nov 3 11:37:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * hw_com.c (hw_com_instance_read, hw_com_instance_write):
+ Implement.
+
+Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * ppc-instructions (data cache instructions): Make all data cache
- instructions nops instead of invalid instructions.
+ * hw_trace.c (hw_trace_init_data): Delete. The trace options need
+ to be initialized independant of the rest of the simulation
+ initalization. Otherwize a trace option explictly set from gdb
+ could be overridden by hw_trace.
- * Makefile.in (CONFIG_CFLAGS): Add ALIGNMENT_CFLAGS and
- TIMEBASE_CFLAGS which weren't included.
+ * psim.c (psim_options): Clarify reason why the trace ioctl occures.
-Thu Nov 2 08:54:04 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * FIXME: The trace code is too scattered - hw_trace.c, psim.c,
+ debug.c. It could be much simpler.
- * Makefile.in: Uncomment built file dependencies.
+Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * configure.in: Rewrite --enable-sim switch handling to use the
- autoconf builtins so it works correctly if the configure or
- Makefile.in files are modified and make decides to rebuild
- Makefile. Also document all of the --enable-sim switches
- supported. Check whether getrusage and sys/resource.h are
- supported.
- * config.in: Regenerate.
- * configure: Regenerate.
- * Makefile.in: Add support for all of the variables set with
- --enable-sim switches.
-
- * Makefile.in (clean): make clean now removes all built sources as
- well.
-
- * cpu.c: Use HAVE_STRING_H, HAVE_STRINGS_H, HAVE_UNISTD_H,
- HAVE_TIME_H, HAVE_SYS_TIMES_H, HAVE_SYS_RESOURCE_H defined in
- the generated config.h.
- * debug.c: Ditto.
- * device_tree.c: Ditto.
- * devices.c: Ditto.
- * dgen.c: Ditto.
- * emul_netbsd.c: Ditto.
- * igen.c: Ditto.
- * lf.c: Ditto.
- * misc.c: Ditto.
- * psim.c: Ditto.
- * registers.c: Ditto.
- * sim_calls.c: Ditt.
- * table.c: Ditto.
+ * Some devices support removable media. Add hooks to the disk
+ device so that it supports this.
+
+ * device.c (device_add_string_array_property,
+ device_find_string_array_property): New functions, manipulate
+ properties containing an array of strings.
+ (device_find_string_property): Allow a string array.
+ (device_init_static_properties): Update.
+ (device_init_runtime_properties): Update.
+
+ * hw_disk.c (hw_disk_ioctl): Add ioctl for changing the disk
+ media. If no file image is specified, use the next one in the
+ image property list.
+ (hw_disk_init_address): Change the file property so that it is a
+ string array - use the first entry for the initial file image.
+
+ * tree.c (print_string_aray_property): New function - print a
+ string array.
+ (print_properties): Adjust.
+ (print_string): Write a string, handling double quotes.
+
+ * device.h: Define an ioctl to `change-media' with an optional new
+ media image.
+
+ * hw_disk.c: Allow floppy disk devices to be specified.
+
+ * psim.c (psim_command): New function, parse more complex psim
+ commands such as "change-media" and "trace".
+ * sim_calls.c (sim_do_command): Use.
+Wed Jan 22 09:38:33 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * main.c (main): Call psim_print_info with verbose == 2.
+ * For expressions like (RA == 0) that are entered in to the cache
+ as RA_is_0. If possible generate the result of the expression so
+ that the compiler gets a better chance of eliminating dead
+ branches.
- * mon.c (mon_print_info): Align the cpu number and number of
- instructions fields. Do not print an instruction category if the
- CPU did not execute any of those instructions. Print out number
- of reads and writes. If getrusage is supported, print out number
- of simulated instructins per second.
+ * gen-icache.c (print_icache_extraction): For a cache entry of
+ the form <name>_is_<const> where it is a boolean field, generate
+ the result of the expression instead of the expression its self.
+ (print_icache_body): Remove code that was looking for *_is_0 and
+ then generating corresponding definitions.
+
+ * gen-icache.c (print_icache_struct): If there is no cache, do not
+ output expressions in idecode.h file.
+
+ * gen-icache.c (print_icache_body): Output them here.
+
+ * ppc-opcode-complex: Clarify constant values for SPR==LR register
+ expansion.
+
+ * ppc-cache-rules (RA_is_0, SPR_is_256): Two new cache entries.
+
+Wed Jan 22 12:24:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * The code that put values in and extracted values from the cache
+ was too compilicated. The cache table did not allow values to be
+ computed from cache entries. #defines could only be used when a
+ cache was present, remove the restriction.
+
+ * ld-cache.h, ld-cache.c: Add a new cache entry type - SCRATCH. A
+ scratch variable is defined when a cache entry is beinf
+ filled. Change the definition of a COMPUTE variable to be defined
+ when the cache entry is being used.
+ * gen-icache.c: Update.
+
+ * ld-cache.h, ld-cache.c: Change field names so that their meaning
+ is more obvious. old_name->field_name, new_name->derived_name.
+ * gen-icache.c: Update
+
+ * gen-icache.h, gen-icache.c (print_icache_body): Make the three
+ different types of cache code - put into cache, extract from
+ cache, no cache - an explicit argument to print_icache_body.
+ * gen-icache.c (print_icache_extraction): Ditto.
+
+ * gen-semantics.c (print_c_semantic): Update use.
+ * gen-idecode.c (print_jump_insn): Update use.
+ * gen-icache.c (print_icache_function): Update use.
+
+ * igen.c (main): Change 'R' option so that it does not force the
+ cache.
+
+ * configure.in (enable-sim-icache): Clarify description. Make
+ #define one of the defaults regardless of the cache. Probably
+ should revamp and add a separate option.
+
+Tue Jan 21 13:26:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * pk_disklabel.c (block_is_fdisk): Tidy up traces - use dos
+ partition numbering.
+ (pk_disklabel_create_instance): Partition 1..4 are valid - not
+ 1..3.
+ (is_iso9660): New function, verify a CD9660 File system.
+ (pk_disklabel_create_instance): Start expanding so that active
+ partition selection is supported.
+
+Mon Jan 20 11:20:15 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * The cap object was retaining a reference to the instance of a
+ device after it was deleted. Instead add and remove cap's from the
+ cap db as they are created and deleted. This ensuring that a
+ capibility is only used during the lifetime of the corresponding
+ object.
+
+ * cap.h, cap.c: Correct cap type - was signed32 should be
+ signed_cell.
+
+ * cap.c (cap_add, cap_remove): New methods for cap object that
+ allow the explicit addition and removal of internal objects that
+ the cap knows about.
+
+ * cap.c (cap_init): Rewrite. Verify that the only objects
+ remaining in the cap data base are those that were entered first.
+ Thse objects will be the permenant ones.
+ * device.c (device_init_address): Remember to initialize the cap
+ database.
+
+ * device.c (device_create_instance_from): Explicitly add device
+ instances to the cap database. Simplify create code.
+ (device_instance_delete): Explicitly remove device instances from
+ the cap database.
+
+ * device.c (device_create_from): Explicitly add a device to the
+ cap data base.
+
+ * device.c (device_create_from): Always set the cap members.
+
+ * hw_disk.c: Output the instance when tracing.
+
+Sun Jan 19 16:44:29 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * tree.c (split_device_specifier): Add support for aliases when
+ looking up a device. Now needs a device as an argument.
+ (split_property_specifier): Ditto.
+
+Sun Jan 19 15:28:23 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * The memory "claim" and "release" methods take an address and
+ size as arguments. These may be multi cell values. Initially fix
+ the memory code so that they check/detect this. Leave the
+ adjustment of any clients to later.
+
+ * hw_memory.c (hw_memory_instance_claim,
+ hw_memory_instance_release): Handle multi-cell memory devices.
+
+ * hw_memory.c (hw_memory_instance_claim): Be tolerant towards the
+ release of memory regions that were not claimed.
+
+Fri Jan 17 12:01:07 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * device.h, device.c (device_instance_call_method): Correct return
+ type - can return either 0 or -1, hence should be a signed type.
+ * device_table.h: Ditto.
+
+ * hw_memory.c (hw_memory_instance_claim,
+ hw_memory_instance_release): Update.
+ * hw_disk.c (hw_disk_max_transfer, hw_disk_block_size,
+ hw_disk_nr_blocks): Ditto.
+
+Fri Jan 17 11:50:13 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * emul_chirp.c (chirp_emul_claim): Implement using the "claim"
+ method belonging to "/chosen/memory".
+ (chirm_emul_release): Ditto.
+
+ * Makefile.in (LIB_INLINE_SRC): Remove emul_* from list of files
+ that are inlined. These modules are called via a table and are
+ not made inline.
+
+ * hw_init.c (update_for_binary_section): Fix failure to allocate
+ memory used by the binary in real-mode executions. If "claim"
+ property is present, allocate memory from the "/chosen/memory"
+ device.
+
+ * emul_chirp.c (emul_chirp_create): Specify that memory should be
+ claimed when loading a real image.
+
+ * hw_memory.c (hw_memory_instance_claim): Don't page align memory
+ allocations.
+
+ * hw_memory.c (hw_memory_instance_release): Avoid infinite loop
+ when merging adjacent memory chunks.
+
+Thu Jan 16 08:51:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * vm.h (vm_data_map_read_buffer, vm_data_map_write_buffer): Add
+ optional PROCESSOR & CIA args so that this routine also abort an
+ access.
+
+ * vm_n.h (vm_data_map_read_N, vm_data_map_write_N): For a
+ miss-aligned access when a transfer fails abort.
- * configure.in: Add support for --enable-sim-opcode=stupid.
+ * emul_bugapi.c (emul_bugapi_do_write): Use emul_read_buffer
+ instead of the vm_read_buffer.
+ * emul_netbsd.c (do_write): Ditto.
+ * emul_unix.c (do_unix_write): Ditto.
+
+Wed Jan 15 14:38:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * configure.in (--enable-sim-jump): Default is NULL and not -E.
* configure: Regenerate.
+
+ * basics.h (__attribute__): Enable attributes if GCC >= 2.6.
+ (UNUSED): Only enable UNUSED if GCC >= 2.7.
+
+ * gen-icache.c (print_icache_extraction): Print UNUSED macro
+ instead of explicit __unused__ attribute.
+ (print_icache_body): Ditto.
+ * idecode_expression.h (FPSCR_BEGIN): Use UNUSED.
-Wed Nov 1 23:46:59 1995 Andrew Cagney <cagney@highland.com.au>
+Wed Jan 15 13:54:50 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * std-config (INLINE_DEVICE_TREE): Don't inline either of
- device_tree.c or devices.c. There is no significant gain.
+ * cpu.h, cpu.c (cpu_synchronize_context): Add CIA argument as
+ reference point.
- * configure.in, Makefile.in: add --enable-sim-icache=[0-9]* and
- IGEN_ICACHE macro.
+ * vm.c (vm_synchronize_context): Add PROCESSOR and CIA as
+ arguments so that there is a reference point for recovery.
+ (vm_synchronize_context): Pass processor+cia for errors.
+ (om_unpack_sr): Ditto.
+ (om_unpack_srs): Ditto.
+ * vm.c (vm_create): Review error messages.
+
+ * vm.c: Include "cpu.h" so that cpu_error is visible.
+
+ * ppc-instructions (Return From Interrupt): Pass CIA.
+ (Instruction Synchronize): Ditto.
+ * psim.c (psim_init): Ditto.
+
+Wed Jan 15 12:25:11 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * cpu.h, cpu.c (cpu_error): Aborts simulation with error message,
+ but also saves current processor state.
-Wed Nov 1 23:46:59 1995 Andrew Cagney <cagney@highland.com.au>
+ * basics.h: Move #include <stdarg.h> to here from device_table.h.
+
+ * interrupts.c (perform_oea_interrupt): Use. No longer loose CIA
+ when simulation aborted.
+ (program_interrupt): Ditto.
+ (floating_point_unavailable_interrupt): Ditto.
+ (alignment_interrupt): Ditto.
+ (floating_point_assist_interrupt): Ditto.
+ (perform_oea_interrupt): Ditto.
+ (machine_check_interrupt): Ditto.
+
+Tue Jan 14 12:19:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * ppc-instructions (Move from Special Purpose Register): Support
+ move from DEC.
+
+Mon Jan 13 16:58:12 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * debug.h, debug.c: Add "interrupts" trace option.
+
+ * interrupts.c (data_storage_interrupt): Add tracing.
+ (machine_check_interrupt): Ditto.
+ (instruction_storage_interrupt): Ditto.
+ (alignment_interrupt): Ditto.
+ (program_interrupt): Ditto.
+ (floating_point_unavailable_interrupt): Ditto.
+ (system_call_interrupt): Ditto.
+ (floating_point_assist_interrupt): Ditto.
+ (deliver_hardware_interrupt): Ditto.
+
+ * interrupts.c (program_interrupt): For UEA mode, halt the
+ processor - so that the current state is saved - instead of
+ aborting.
+ (floating_point_unavailable_interrupt): Ditto.
+ (floating_point_assist_interrupt): Ditto.
- * igen.c (main), misc.h (target_a2i, i2target), misc.c: Add
- functions to convert between target and igen internal bit numbers.
- Make IO go through these functions. Add -b (bit size) and -h (high
- bit nr) options to igen. Typical usage would be: ./igen -b 16 -h
- 15 for a 16 bit instruction format with the msb given a number 15.
+Thu Jan 2 09:10:41 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Wed Nov 1 22:17:32 1995 Andrew Cagney <cagney@highland.com.au>
+ * interrupts.c (perform_oea_interrupt): Halt rather than abort on
+ a double interrupt.
- * dgen.c (main): Was outputting optarg even when it was NULL.
+Wed Jan 1 22:54:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Tue Oct 31 23:48:33 1995 Andrew Cagney <cagney@highland.com.au>
+ * ppc-instructions (Store Multiple Word, Load Multiple Word):
+ Enable.
- * vm_n.h (vm_data_map_load_N, vm_data_map_store_n), debug.h,
- debug.c: Add tracing of load/store unit (virtual) with -t
- load-store.
+ * tree.c (print_properties): For an array consider printing it out
+ as an integer array.
-Tue Oct 31 21:44:01 1995 Andrew Cagney <cagney@highland.com.au>
+ * hw_memory.c (hw_memory_init_address): If an "available" property
+ is present, use that to initialize the available memory instead of
+ using the reg property.
- * std-config.h (WITH_ENVIRONMENT): Add USER_ENVIRONMENT which does
- not include things such as the time base and events.
+ * emul_generic.c (emul_add_tree_hardware): Add "available"
+ property to memory device.
- * interrupt.c, sim_calls.c, cpu.h, vm.c, configure.in: Add UEA to
- all environment switches for above.
+Fri Dec 20 13:19:07 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * psim.c (psim_create): ditto - new device tree node name is
- /options/environment-architecture with values user, virtual and
- operating.
+ * ppc-instructions (Rotate Left Word then AND with Mask): Enable.
-Tue Oct 31 21:31:32 1995 Andrew Cagney <cagney@highland.com.au>
+ * device.c (device_instance_call_method): Was only looking at the
+ first method.
- * ppc-opcode-stupid: Third example of use of opcode table - this
- one expands all mtspr/mfspr and branch instructions. Appears to
- give about a 10% gain in performance if everything enabled. Also
- takes about 150mb of swap to build.
+ * hw_disk.c (hw_disk_nr_blocks): Implement #blocks method.
+ (hw_disk_block_size): Implement block-size method.
+ (hw_disk_max_transfer): Implement max-transfer method.
-Wed Nov 1 10:49:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * hw_phb.c (hw_phb_init_address): Reinit the rest of the PHB.
- * emul_netbsd.c (do_exit): Print arguments and close parenthesis
- if tracing, since exit doesn't go through emul_exit_call.
- (do_read): Print arguments if tracing.
- (do_write): Ditto.
- (do_open): Ditto.
- (do_break): Ditto.
- (do_kill): Ditto.
- (do_dup): Ditto.
- (do_sigprocmask): Replace trace with printing arguments if
- tracing.
- (do_ioctl): Print arguments if tracing.
- (do_umask): Ditto.
- (do_dup2): Ditto.
- (do_fcntl): Ditto.
- (do_gettimeofday): Ditto.
- (do_getrusage): Ditto.
- (do_fstatfs): Ditto.
+ * emul_chirp.c (chirp_emul_instance_to_path): Recover from an
+ invalid ihandle.
+ (chirp_emul_instance_to_package): Ditto.
+ (chirp_emul_method): Ditto.
+ (chirp_emul_read): Ditto.
+ (chirp_emul_write): Ditto.
+ (chirp_emul_close): Ditto.
+ (chirp_emul_seek): Ditto.
+ (chirp_emul_package_to_path): Ditto (for phandle).
+ (chirp_emul_package_to_path): Return the length.
- * filter_filename.c: New file to provide filter_filename to strip
- the directory prefix from a file.
- * filter_filename.h: New include file to declare filter_filename.
+ * psim.c (psim_merge_device_file): Allow continuation lines.
- * debug.h: Include filter_filename.h.
- (TRACE,DTRACE,ERROR): Use filter_filename on __FILE__.
+Thu Dec 19 11:09:43 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * misc.h: Include filter_filename.h.
- (ASSERT): Use filter_filename on __FILE__.
+ * emul_chirp.c (chirp_emul_boot): Implement. Well report the new
+ string and exit.
+
+ * emul_chirp.c (chirp_emul_exit): Correct type of args struct
+ members - *_cell not host dependant int.
- * igen.c (lf_print_my_prefix): Use filter_filename on the filename
- argument.
+Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * Makefile.in: Add filter_filename support.
+ * interrupts.c (perform_oea_interrupt): Print additional
+ information if a double interrupt is encountered.
- * ppc-instructions (dcbi, icbi): Make these NOPs rather than
- invalid instructions.
+Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * psim.c (psim_merge_device_file): Tolerate an incorrect file-name
+ being specified with the -f option.
+ (psim_merge_device_file): Correct check for end of string.
- * configure.in: Add support for more --enable-sim-* switches.
- Use config.make and config.hdr to write to Makefile and config.h
- respectively. Don't rewrite Makefile, just append to it.
- * configure: Regenerate.
- * config.{make,hdr}: New shell scripts.
+Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * Makefile.in: Remove all variables set by configure.in.
- (psim.o): Depend on $(BUILT_SRC) also.
+ * emul_chirp.c (chirp_emul_peer): Was falling off the end of the
+ list of devices. Return zero to the client instead.
+ * emul_chirp.c (chirp_emul_child): Ditto
+ * emul_chirp.c (chirp_emul_parent): Ditto
+
+ * device.c (device_root): Assert assumption about the device being
+ valid.
+
+Tue Dec 17 15:12:38 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * emul_chirp.c (emul_chirp_create): Add description property to
+ each significant node in the device tree.
+ * emul_bugapi.c (emul_bugapi_create): Ditto.
- * emul_netbsd.c (do_gettimeofday,do_getrusage): When comparing an
- integer, use 0, not NULL.
+Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Tue Oct 31 15:20:04 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * main.c (sim_io_read_stdin): For a single byte STDIO read, use a
+ tempoary two byte buffer. Single byte read with fgets will not
+ work.
+ * main.c: Include errno.h.
+ (sim_io_read_stdin): For non-STDIO, make it work.
- * configure.in: Add support for --enable-sim-inline,
- --enable-sim-bswap, --enable-sim-cflags, --enable-sim-complex,
- --enable-sim-switch, --enable-sim-duplicate, --enable-sim-filter,
- and --enable-sim-endian switch to control various Makefile
- variables.
- * configure: Regenerate from configure.in.
- * Makefile.in: Add various Make variables that the various
- switches alter.
+ * emul_chirp.c (chirp_emul_read): Return the correct error status.
- * std-config.h (DEFAULT_INLINE): Don't set this to 2 if using GCC
- and optimizing by default.
+Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Fri Oct 27 19:26:27 1995 Andrew Cagney <cagney@highland.com.au>
+ * std-config.h (WITH_STDIO): Don't hard-wire the STDIO mechanism.
+ Instead have each emulation default it to DO_USE_STDIO.
- * bits.h (ROTL32, ROTL64): Were functions, made them macros, now
- make them functions again. Appears 2.6.3 is confused by just a
- macro.
+ * emul_generic.c (emul_add_tree_options): Select the STDIO I/O
+ mechanism as the default if enabled or if nothing selected.
-Thu Oct 26 18:31:58 1995 Andrew Cagney <cagney@highland.com.au>
+ * sim_calls.c (sim_io_read_stdin): Passify GCC's desire for a
+ return value.
+ (sim_io_write_stdout): Ditto.
+ (sim_io_write_stderr): Ditto.
+ * main.c (sim_io_write_stdout): Ditto.
+ (sim_io_write_stderr): Ditto.
+ (sim_io_read_stdin): Ditto.
- * ppc-endian.c (SWAP_8): Fix 8 byte swap!
+Tue Dec 10 10:31:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
- * psim.c (psim_create): Not correctly checking that runtime
- configuration of things like ENDIAN, ENVIRONMENT and ALIGNMENT
- matched the compiled in ones.
+ * emul_chirp.c (emul_chirp_instruction_call): Make *printf calls
+ type correct.
+ * vm.c (om_effective_to_virtual): Ditto.
+ * events.c (event_queue_schedule{,_after_signal}): Ditto.
+ (event_queue_{deschedule,process}): Ditto.
+ * hw_htab.c (htab_decode_hash_table): Ditto.
+ (htab_map_{page,binary}): Ditto.
+ * hw_opic.c (hw_opic_init_data): Ditto.
+ (handle_interrupt): Ditto.
+ (do_processor_init_register_{read,write}): Ditto.
+ (write_vector_priority_register): Ditto.
+ ({read,write}_destination_register): Ditto.
+ (do_suprious_vector_register_{read,write}): Ditto.
+ (do_current_task_priority_register_N_{read,write}): Ditto.
+ (do_timer_frequency_reporting_register_{read,write}): Ditto.
+ (do_timer_N_{current,base}_count_register_{read,write}): Ditto.
+ (do_ipi_N_dispatch_register_write): Ditto.
+ (do_vendor_identification_register_read): Ditto.
+ (do_feature_reporting_register_N_read): Ditto.
+ (do_global_configuration_register_N_{read,write}): Ditto.
+ * hw_phb.c (hw_phb_attach_address): Ditto.
+ (hw_phb_unit_decode): Ditto.
+ (hw_phb_address_to_attach_address): Ditto.
+ (hw_phb_io_{read,write}_buffer): Ditto.
+ * hw_ide.c (setup_fifo): Ditto.
+
+ * sim_calls.c ({defs,callback,remote-sim}.h): Find gdb include
+ files via -I<dir> instead of using "../../gdb/" prefixes.
+
+Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * debug.h: Add tracing for the pal device.
+ * hw_pal.c: Update.
+
+ * emul_chirp.c (chirp_emul_getprop): More tracing.
+
+Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * device.h, device.c (device_find_ihandle_runtime_property): New
+ function. Reverse of add_ihandle_runtime property.
+ (device_init_runtime_properties): Use it.
+
+ * device.c (find_property_entry): New function returns the
+ internal property spec.
+ (device_set_property): Use.
+ (device_find_property): Use.
- * debug.h (ITRACE), igen.c: Tidy up more tracing flags -
- trace_semantics is now different to trace_idecode, the former
- checks the cache.
+Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * psim.c (psim_merge_device_file): Strip newline from device
+ specs.
-Tue Oct 24 21:54:13 1995 Andrew Cagney <cagney@highland.com.au>
+Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * ppc-instructions (mtsrin): Missing instruction
- * ppc-instructions (mfsrin): Missing instruction
- * ppc-instructions (eieio): Missing instruction
+ * hw_htab.c (htab_map_binary): For overlapping text / data maps
+ merge the two. Also check that the merge is safe.
-Tue Oct 24 20:55:29 1995 Andrew Cagney <cagney@highland.com.au>
+ * emul_chirp.c (emul_chirp_create): Add a description property to
+ the pte's so that they are easier to identify.
+
+ (emul_chirp_create): Don't specify a load address for the CHRP
+ image. Always use the values specified by the executable.
- * build-psim: New shell script - see internals for usage,
- simplifies the process of building custom simulators.
+ * hw_htab.c (htab_map_page): Abort if a duplicate map is
+ encountered.
-Mon Oct 23 23:48:59 1995 Andrew Cagney <cagney@highland.com.au>
+Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * std-config.h (SEMANTICS_INLINE): Tidy up notes on each of the
- INLINE macros. Make SEMANTICS_INLINE == 1 if DEFAULT_INLINE == 2.
- Don't use DEFAULT_INLINE to define REGISTERS_INLINE DEVICES_INLINE
- DEVICE_TREE_INLINE or INTERRUPTS_INLINE as none of these are on
- the instruction or data critical paths.
-
- * FIXME: need to set up OS_EMUL_INLINE/EMUL_GENERIC_INLINE but
- not on critical path.
+ * hw_htab.c (htab_map_page): Formatting.
- * FIXME: devices.c/emul_netbsd.c would benefit (slightly) from
- the inclusion of device_tree.c/emul_generic.c.
+ * emul_chirp.c (emul_chirp_instruction_call): Check for a NULL
+ method name when handling the client call. Also check for other
+ bad call arguments.
+
+ * emul_chirp.c (emul_chirp_create): Allow real-mode?, real-base,
+ etc to be overriden.
-Mon Oct 23 00:31:50 1995 Andrew Cagney <cagney@highland.com.au>
+Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * os_emul.[hc], emul_generic.[hc], emul_netbsd.[hc]: replace
- system.[hc]. Start of suport for multiple emulations and
- emulation state (os_emul object).
+ * os_emul.c (os_emul_create): Use tree find property instead of
+ device find property - sigh.
- * emul_generic.[hc]: Start of code to implement proper system call
- tracing (from spy).
+Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Sun Oct 22 21:33:51 1995 Andrew Cagney <cagney@highland.com.au>
+ * 961205: Release snapshot 961205.
+
+Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * cpu.h, cpu.c (cpu_init): New function, zero the registers before
- the processor is started. Fixes problem of registers being
- undefined when restarting from within gdb.
+ * configure.in (hostbitsize, bitsize): Fix typo in error message -
+ cannot contain a comma.
+ (sim-warnings): Check for more potential errors.
- * cpu.h, cpu.c (cpu_flush_icache): New function, flushes the
- instruction cache (if present). Fixes problem of cpu caching gdb
- breakpoint instructions.
+ * psim.c (psim_usage): Add -f <file> option. Specifies a file
+ containing device tree specifications that should be merged into
+ the device tree.
- FIXME: PSIM sometimes aborts calling error(), it should instead
- call sim_error() say which takes care of housekeeping such as
- saving the CIA before calling error.
+ * configure.in: Sort options.
+ * configure: Rebuild
- * NOTE: cpu_flush_cache() instead of cpu_synchronize_context() is
- used when restarting a simulation because the latter has the
- unwanted side effect (well I as a kernel hacker think it is) of
- performing an isync when the instruction stream doesn't contain
- one.
+Wed Dec 4 13:57:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * psim.c (psim_usage): Add -n option - specify number of
+ processors.
+
+ * emul_chirp.c: Add description.
+ * emul_bugapi.c: Ditto.
+ * emul_unix.c: Ditto.
+ * emul_netbsd.c: Ditto.
-Sun Oct 22 19:27:48 1995 Andrew Cagney <cagney@highland.com.au>
+Fri Nov 29 11:12:22 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
- * mon.h (new), mon.c (new), std-config.h (WITH_MON): Performance
- monitoring module. Counts both instructions issued and
- load/stores.
+ * hw_pal.c (hw_pal_attach_address): New function, if an attach is
+ encountered, assume that it is the single disk.
+ * hw_pal.c: Add generic device/size decode methods.
+
+ * hw_nvram.c (hw_nvram_init_address): Use the first nonzero reg
+ property entry when determining the nvram size.
- * NOTE: mon does not contain to count instruction loads as this
- information is already available from the mon_issue() hook.
+ * hw_core.c: Add generic address/size decode methods.
- * FIXME: mon doesn't have access to register usage information.
- This is needed if the user wants to monitor things like register
- stalls.
+ * emul_chirp.c (emul_chirp_instruction_call): Return and trace
+ nonzero status from client functions.
- * igen.c (lf_print_c_semantic), vm_n.h: Add counting code.
+ * main.c (error): Always include a cariage return when writing out
+ errors.
- * psim.h, psim.c (psim_create), cpu.h, cpu.c (cpu_create): Attach
- a common monitor to each of the cpus. Delete
- cpu_increment_number_of_insns() and cpu_get_number_of_insns()
- replaced by copied code in mon.[hc].
+Wed Nov 20 00:36:55 1996 Doug Evans <dje@canuck.cygnus.com>
-Sun Oct 22 18:42:45 1995 Andrew Cagney <cagney@highland.com.au>
+ * sim_calls.c (sim_resume): Reset sim_should_run if single
+ stepping.
- * sim_calls.c, main.c, psim.c (psim_create): always create
- `WITH_SMP' cpus. The actual number of CPU's active in a
- simulation run is taken from the device node: /init/smp (an
- integer). WITH_SMP changed to 2 (remember to put it back to 0).
+Thu Nov 28 13:19:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
-Fri Oct 20 17:26:54 1995 Andrew Cagney <cagney@highland.com.au>
+ * emul_bugapi.c (emul_bugapi_do_diskio): Add support for multiple
+ optional disks.
- * system.c: More system call emulation. If code appears NetBSD
- specific, make conditional to being compiled on a NetBSD system
- (sigh).
+ * emul_generic.c (emul_add_tree_hardware): Drop the dummy eeprom.
+ Attach the pal - for I/O - as a pseudo device haning from the
+ firmware sub tree.
-Wed Oct 18 23:02:20 1995 Andrew Cagney <cagney@highland.com.au>
+ * emul_bugapi.c (emul_bugapi_create): Add a small memory device to
+ the device tree at the address of the hi-mem interrupt vector
+ addreses. Used by bugapi to establish its trap instructions.
- * Makefile.in, gen.c(delete), igen.c(new), dgen.c(new),
- lf.[ch](new), table.[ch](new): Split into two generators - igen
- that outputs the instruction tables and dgen that outputs the spr
- tables. Add -f (filter out) flag to igen to filter out certain
- instructions (ex 64 bit ones) from the created tables. Include
- $(LIBIBERTY_LIB) in link options in case host lacks some libc
- functions.
+ * debug.h: Add a new macro DITRACE for tracing device instances.
+
+ * debug.h: Extend the DTRACE macro so that it can also tests for
+ device specific tracint.
+
+ * device.h, device.c (device_trace): Add method to determine
+ device specific tracing.
+ (device_init_address): Set the devices tracing level.
+
+Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * NOTE: igen, since it was originally written for the
- PowerPC/RS6000, things the MSB is 0 and the LSB is 63{31}.
+ * tree.h, tree.c (tree_device): New files - separate out the
+ device parser and other tree operations from the device.
+
+ * inline.h, inline.c (INLINE_TREE): Add.
+ * device.h, device.c (device_tree_add_parsed): Delete.
+ * Makefile.in (tree.c): Add rules for new file.
+ * Makefile.in: Better order the emul_* files.
+
+ * emul_generic.c (emul_add_tree_hardware): Update.
+ * emul_netbsd.c (emul_netbsd_create): Update.
+ * emul_unix.c (emul_unix_create): Ditto.
+ * emul_chirp.c (emul_chirp_create): Ditto.
+ * emul_bugapi.c (emul_bugapi_create): Ditto.
+ * psim.c (psim_tree): Ditto.
+ * hw_init.c: Ditto.
- * Makefile.in, std-config.h, ppc-cache-rules(new),
- ppc-opcode-complex(new), ppc-opcode-simple(new): (for igen) Create
- cache-rule and opcode-rule tables from macros found std-config.h.
- Delete corresponding macro's from std-config.h.
-
- * FIXME: under this new igen scheme, when playing around with igen
- options, you'll find that depenencies don't work very well.
+ * emul_generic.h: Include tree.h
+ * Makefile.in: Add to EMUL_GENERIC_H dependencies.
+
+ * device.h, device.c (device_root): New function - returns the
+ root of the tree.
+ * corefile.c: Use.
+
+ * device.h, device.c (device_clean): New function, clean up device
+ ready for next simulation run. This includes things like deleting
+ interrupt edges and properties created during the simulation and
+ also scrubbing any pre-defined properties.
+ * tree.c (tree_init): Use.
+
+ * device.h, device.c (device_init_static_properties): New
+ function. Initialize any static predefined properties. By static
+ we mean those that have values that can be determined before the
+ device tree initialization has started.
+ * tree.c (tree_init): Use.
+
+ * device.h, device.c (device_init_address): Add code to
+ check/verify the devices #address-cells and #size-cells.
+ (device_add_integer_property): Delete corresponding code.
+ (device_nr_address_cells, device_nr_data_cells): Check for
+ property when returning value.
+
+ * device.h, device.c (device_init_runtime_properties): New
+ function. Initialize those properties that are not `static'. At
+ present the only such property is the ihandle.
+ * tree.c (tree_init): Use.
+
+ * device.h, device.c (reg, ranges): Rework these so that they use
+ an array of the fundamental type - single reg or single range
+ entry.
+
+ * device.h, device.c (device_add_ihandle_runtime_property):
+ Re-implement the adding of an ihandle during tree construction so
+ that it better fits in with device initialization.
+
+Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * igen.c (gen_itable_c, gen_itable_h), Makefile.in: code to output
- an table of all the instructions. Code to output a type
- enumerating all the instructin names.
+ * device.h, device.c (device_ioctl): Add additional argument -
+ request - so that the caller must always specify the type of
+ the ioctl request.
- * igen.c(lf_print_c_semantic): Move call to increment instruction
- counter so that it occures _after_ the instruction has been fully
- validated, was double counting illegal/invalid instructions. Add
- conditional so only compiled in when WITH_PROFILE enabled (enabled
- by default).
+ * device_table.h: Update.
+ * hw_trace.c (hw_trace_ioctl): Ditto.
+ * hw_vm.c (hw_vm_ioctl_callback): Ditto.
+ * hw_init.c (hw_stack_ioctl_callback): Ditto.
+ * psim.c (psim_options): Ditto.
- * igen.c, cpu.h, cpu.c(cpu_increment_number_of_insns): Include
- itable.h, count individual instruction types not just total,
- adjust reporting functions to output this.
+Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * ppc-instructions (64 bit Load Doubleword with Update Indexed):
- Had 32./ instead of 31./
+ * BUGS: Updated a bit.
- * ppc-instructions (64 bit Store Double Word Conditional Indexed):
- bitrot - updated to use newer CR register operators.
+Wed Nov 20 14:06:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * ppc-instructions (64bit Floating Convert from Integer
- Doubleword): Correct call to Round_Float().
+ * hw_opic.c: Finish - third round.
-Mon Oct 16 00:31:20 1995 Andrew Cagney <cagney@highland.com.au>
+Wed Nov 20 12:02:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * basics.h: #include "sim_callbacks.h" earlier so that its
- prototypes are declared in all other header files.
+ * hw_glue.c (hw_glue_io_read_buffer_callback): Fix miscalc of glue
+ reg index.
+ (hw_glue_io_write_buffer_callback): Ditto.
- * bits.h, bits.c, idecode_expression.h (ROTL32, ROTL64): Update
- doc in bits.h, remove dead code in bits.c, move ROTL32/ROTL64 into
- bits.h.
+Tue Nov 19 21:17:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * FIXME: the bits.h/bits.c macro's should be replaced with
- (inline) c functions.
+ * events.c (event_queue_process): Was incorrectly consuming future
+ events on the queue when they should be left alone.
- * cpu.c(cpu_add_commas), device_tree.h, device_tree.c(scand_*):
- Add size of buffer argument to functions writing a string into a
- buffer. Check for buffer overflow.
+ * debug.h, debug.c (events): Add support for event queue tracing.
+ * events.c: Add event tracing.
+
+ * debug.h, debug.c: Order device trace options.
-Sun Oct 15 22:16:11 1995 Andrew Cagney <cagney@highland.com.au>
+Fri Nov 15 15:23:39 1996 Michael Meissner <meissner@tiktok.cygnus.com>
- * devices.h, devices.c, debug.h, debug.c: add macro's for tracing
- of each device. Make parameter names consistent so macros work.
- Use macro's in device functions.
+ * pk_disklabel.c (pk_disklabel_create_instance): Fix up some
+ warnings generated by GCC.
- * device_tree.c, devices.h, devices.c: include path to device in a
- devices node when creating it.
+Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * device_tree.c, debug.h, debug.c: Add tracing of `device-tree'.
+ * sim-endian.h: Add LE versions of byte swap macros. Needed for
+ PCI devices which are little-endian.
+
+ * sim-endian-n.h (endian_le2h_N, endian_h2le_N): Ditto
+
+Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_iobus.c (hw_iobus_attach_address_callback): Change the iobus
+ so that it is implementing a 1-1 address map.
+
+ * emul_generic.c (emul_add_tree_hardware): Adjust.
- * core.c: add tracing of core-device, adjust parameter names in
- core functions to be consistent with those in devices*.
+ * emul_generic.c (emul_add_tree_hardware): Don't add the nvram as
+ a default.
-Sun Oct 15 20:33:20 1995 Andrew Cagney <cagney@highland.com.au>
+Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (split_find_device): Be tolerant of missing unit
+ addresses.
- * debug.h, debug.c (trace_option): New function. Parses the trace
- option, updating the trace array.
+Fri Nov 15 16:49:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * debug.h, debug.c (trace_usage): New function. Outputs the list
- of all possible trace options.
+ * basics.h (port_direction): New type, specify the direction of
+ any `port'.
+
+ * device.h, device.c (device_interrupt_decode): Include
+ specification of port direction in operations.
+ (device_interrupt_encode): Ditto.
+
+ * device_table.h: Add a direction field to the interrupt port
+ table.
- * sim_calls.c (sim_open), main.c (main): Use new trace_option() to
- parse trace options specified with the simpler -t flag. Adjust
- usage.
+ * device.c (device_tree_add_parsed): Specify port direction.
+
+Thu Nov 14 21:38:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * FIXME: basic parsing of command line options is still duplicated
- by main.c and sim_calls.c
+ * hw_opic.c: Finish - second round.
-Thu Oct 26 10:42:28 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Thu Nov 7 00:18:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (clean): Delete *.i and *.out files.
+ * hw_htab.c (htab_init_data_callback): Allow the virtual-address
+ to be specified as an array which allows 64bit addresses.
- * ppc-endian.c (SWAP_n): Add SET argument to allow use of SWAP
- macros for either assignment or return. Fix SWAP_8 to use a
- union, and two SWAP_4's. Delete SWAP_N, since nobody uses it now.
- (ENDIAN_N): Add SET argument to SWAP_n calls. Delete macro defs
- that hardwired swapping on/off, let optimizer delete dead code.
+ * device.c (device_find_integer_array_property): New function.
+ Simplify the querying of elements of an integer array.
+ (device_add_integer_property, device_find_integer_property):
+ Update to correctly use the cell type.
- * main.c (main): Add printf that we caught a signal and print out
- the failing address.
+ * vm.c (om_unpack_sr): Clarify shifting comment.
+ (om_pte_0_masked_vsid): Ditto. Add 64bit version.
-Thu Oct 19 21:43:39 1995 Fred Fish <fnf@fishfood.amigalib.com>
+ * emul_chirp.c (emul_chirp_create): Initialize the segment
+ registers.
- * Makefile.in: Remove tabs from otherwise empty line.
- Confuses many non-GNU versions of "make".
+ * vm.c (om_effective_to_virtual): Trace segment register use.
-Wed Oct 18 08:51:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * hw_htab.c (htab_map_page): Print out the pteg base address to
+ simplify cross checking between vm and the htab.
+ (htab_decode_hash_table): Use device_error instead of error.
+ (htab_map_page): Ditto.
+ (htab_dma_binary): Ditto.
+ (htab_map_binary): Ditto.
+ (htab_init_data_callback): Ditto.
- * Makefile.in (clean): Delete files produced by gen.
+Wed Nov 6 20:20:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Mon Oct 16 17:34:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * interrupts.h: Clarify what the optional instruction program
+ interrupt is - a subset of illegal instruction program interrupt.
- * gen.c (lf_print_c_semantic_function): Move counting # of
- instructions here so it works with caching.
- (gen_idecode_c): Move from here.
+ * interrupts.c (program_interrupt): For UEA mode, clarify what an
+ optional instruction program interrupt is.
+ (program_interrupt): For OEA mode, as per spec, generate an
+ illegal instruction program interrupt when an optional instruction
+ is encountered.
+
+ * gen-semantics.c (print_semantic_body): Delete code
+ differentiating between an unimplemented floating point and normal
+ instruction. Instead, such a case can be handled explicitly.
+
+ * ppc-instructions (store floating-point as integer word indexed):
+ Mark as optional.
+ (Floating Convert to Integer Doubleword): Make the floating point
+ assist interrupt explicit.
+ (Floating Convert To Integer Doubleword with round towards Zero):
+ Ditto.
+ (Floating Convert To Integer Word): Ditto
+ (Move From FPSCR): Ditto.
+ (Move to Condition Register from FPSCR): Ditto.
+ (Move To FPSCR Fields): Ditto.
+ (Move To FPSCR Field Immediate): Ditto.
+ (Move To FPSCR Bit 0): Ditto.
+ (Move To FPSCR Bit 1): Ditto.
+
+Mon Nov 4 12:49:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Wed Oct 11 17:13:15 1995 Andrew Cagney <cagney@highland.com.au>
+ * corefile.c (core_map_read_buffer, core_map_write_buffer): Avoid
+ breaking up transfers.
- * gen.c, ppc-instructions, psim.c: Fix code for generating
- cracking instruction cache. Delete the code that cached just the
- result from doing an instruction lookup - this ran slower than no
- cache at all.
+ * corefile.c: Adjust arguments so that the client server
+ relationship is clarified.
+
+ * hw_glue.c (hw_glue_init_address): Update so it can be attached
+ to a PCI bus.
-Fri Oct 13 09:58:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * hw_disk.c (hw_disk_instance_write): Add more checks to disk IO -
+ looking for things like overflow/underflow.
- * Makefile.in (gen.o): Include $(INLINE_CFLAGS).
+Sun Nov 3 18:45:20 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * debug.h (ppc_trace): Rename from trace, to avoid a conflict with
- TCL when gdb is linked with the simulator.
- * debug.c (ppc_trace): Ditto.
- * sim_calls.c (sim_open): Change trace -> ppc_trace.
- * main.c (main): Ditto.
+ * emul_generic.c (emul_add_tree_hardware): Hang the disk off the
+ PAL device instead of the IOBUS. The disk must be attached to a
+ logical bus.
- * cpu.c (cpu_add_commas): Remove extra static.
+ * hw_disk.c (hw_disk_init_address): Just use the unit address
+ directly in the attach - the rest isn't relevant.
-Thu Oct 12 11:35:53 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Sat Nov 2 21:48:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (psim.o): Now that inlines are turned on, make
- psim.o depend on all sources.
+ * configure.in (sim-hardware, sim-packages): Allow additional
+ hardware and packages to be prefixed as well as appended.
- * cpu.c (cpu_add_commas): New function to format a long with
- commas.
- (cpu_print_info): Use it to print number_of_insns.
+ * Makefile.in (tmp-hw, tmp-pk): Retain the user specified order of
+ packages when building them. Consequently, a user can override a
+ standard device by prefixing their own version.
- * ppc-endian.c (SWAP_n): New macros to speed up byte swapping for
- 2, 4, and 8 bytes.
- (ENDIAN_N): If both target and host byte orders are known, don't
- bother testing CURRENT_{TARGET,HOST}_BYTE_ORDER.
+ * Makefile.in (hw_opic.o, hw_pci.o, hw_ide.o): Add dependencies.
+
+Fri Nov 1 14:42:57 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * mon.c (_cpu_mon): Add fields for counting 1, 2, 4, and 8 byte
+ reads and writes.
+ (mon_{read,write}): Count 1, 2, 4, and 8 byte reads/writes.
+ (mon_print_info): Correct typo regarding # of unaligned reads and
+ writes. Print out how many 1, 2, 4, and 8 byte reads/writes there
+ are.
+
+Tue Oct 29 17:55:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (AC_CHECK_FUNCS): Add access.
+ * config{.in,ure}: Regenerate.
+
+ * emul_unix.c (do_unix_nop): System call that always succeeds.
+ (do_unix_access): Support access system call.
+ (solaris_descriptors): Make sigaltstack and sigaction nops.
+ ({solaris,linux}_descriptors): Add support for access.
- * ppc-endian.h (target specific H2T_n/T2H_n macros): Remove #if 0
- to allow target specific H2T_n/T2H_n macros to be used.
- (htonl, ntohl): If compiled on a 486 by GCC and WITH_BSWAP is
- non-zero, redefine the htonl/ntohl macros to use the BSWAP instead
- of the 3 instruction sequence that runs on 386s.
+Tue, 8 Oct 18:42:26 1996 Jason Molenda <crash@cygnus.co.jp>
+
+ * Makefile.in (clean): Move config.log to distclean.
- * std-config.h (WITH_{HOST,TARGET}_BYTE_ORDER): Don't override if
- specified on the compile line.
- (WITH_BSWAP): If not defined, define as 0.
+Fri Nov 1 16:44:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (INLINE_CFLAGS): Add -DDEFAULT_INLINE=2 to add
- default inline support. Pass INLINE_CFLAGS when compiling.
+ * corefile-n.h (core_map_write_N): Improve abort messages.
- * devices.{h,c} (unimp_device_ioctl): Use STATIC_DEVICES, not
- INLINE_DEVICES since GCC doesn't like inline functions that
- accept variable arguments.
- (stack_ioctl_callback): Make function just static because GCC
- doesn't like inline functions that accept variable arguments.
+ * device.h, device.c (device_attach_address): Remove unused name
+ parameter.
+ (device_detach_address): Ditto.
+ * device_table.h, device_table.c: Update.
+ * hw_iobus.c (hw_iobus_attach_address_callback): Ditto.
+ * hw_nvram.c (hw_nvram_init_address): Ditto.
+ * hw_memory.c (hw_memory_init_address): Ditto.
+ * hw_vm.c (hw_vm_init_address_callback): Ditto.
+ (hw_vm_attach_address): Ditto.
+ (hw_vm_add_space): Ditto.
+ * hw_init.c (update_for_binary_section): Ditto.
+ * hw_core.c (hw_core_attach_address_callback): Ditto.
- * devices.h (STATIC_DEVICES): Define as empty if not defined.
+ * hw_iobus.c (hw_iobus_attach_address_callback): Rewrite to handle
+ configurable parent busses.
- * inline.c: Correct pathnames of included C files to match current
- implementation.
+Wed Oct 30 18:46:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * inline.h (STATIC_DEVICES): If DEVICES_INLINE is defined to be
- non-zero, define STATIC_DEVICES to be static.
+ * device_table.c (generic_device_size_to_attach_size): Provide
+ limited support for multi-cell sizes.
+ (generic_device_address_to_attach_address): Ditto for addresses.
- * std-config.h (INLINE): If GNU C and optimizing, define this as
- __inline__.
- (DEFAULT_INLINE): If not defined, define as 0.
- (ENDIAN_INLINE): If not defined, define as DEFAULT_INLINE.
- ({CORE,VM,CPU,EVENTS,REGISTERS,INTERRUPTS}_INLINE): Ditto.
- ({SPREG,IDECODE}_INLINE): Ditto.
+Tue Oct 29 02:01:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (device_add_integer_property): Check for setting of
+ #address-cells and #size-cells properties. For these, update the
+ corresponding device values.
+ (device_nr_address_cells, device_nr_size_cells): Use the value
+ from the device instead of the property.
+
+ * hw_core.c: Use generic address and size conversions for the top
+ bus.
+
+ * hw_memory.c (hw_memory_init_address): Tolerate case where
+ #address and #size cells is greater than 1.
+
+ * device.c (device_tree_print_device): Clean out printing of
+ properties.
-Wed Oct 11 17:13:15 1995 Andrew Cagney <cagney@highland.com.au>
+ * device.c (split_device_specifier): Don't detect comments here -
+ "#" can be a valid prefix - eg #size-cells.
+
+ * psim.c (psim_merge_device_file): Suppress comments and blank
+ lines here.
+
+ * emul_generic.c (emul_add_tree_hardware): Fix typo of incorrect
+ pal unit address. Add the property /#address-cells to the root of
+ the tree.
+
+ * device.c (device_template_create_device): Check that the unit
+ address was successfully parsed.
+
+ * device_table.c (generic_device_unit_decode): Rewrite to better
+ handle multi-cell addresses.
+ (generic_device_unit_encode): Ditto.
- * ppc-instructions: Initial cut of floating point suport added.
- Of note include - use of host IEEE floating point instructions,
- use of PowerPC manual pseudo code to handle the FPSCR. It is not
- currently a pretty sight.
+ * emul_generic.c (emul_add_tree_hardware): "reg" properties no
+ longer need the explicit array type - the parser takes care of it.
+
+ * pk_disklabel.c (pk_disklabel_create_instance): Add NULL return
+ to keep GCC happy.
+
+Mon Oct 28 22:55:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_ide.c: New file. Model of a basic IDE interface attached to
+ a PCI bus.
+
+ * configure.in (hardware): Add the ide device to the default
+ configuration.
+ * configure: Regenerate.
+
+ * debug.h, debug.c: Add tracing option for the IDE device.
- * memory_map.h, memory_map.c, memory_map_n.h, core.h, core.c:
- merge into core.h, core.c, core_n.h. The type memory_map replaced
- with core_map. This removes a level of pointer indirection when
- translating an address.
+Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_phb.c, hw_phb.h: New files - implement a PHB.
+
+ * configure.in (hardware): Add the phb to the list of devices to
+ build by default.
- * memory_map.h, memory_map.c, memory_map_n.h: delete.
+Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in et.al (sorry): tweek to use new core, core_map and
- core.h.
+ * hw_com.c: Review description.
+ * hw_disk.c: Ditto.
+ * hw_htab.c: Ditto.
+ * hw_eeprom.c: Ditto.
+ * hw_init.c: Ditto.
+ * hw_cpu.c: Ditto.
-Wed Oct 11 12:10:26 1995 Andrew Cagney <cagney@highland.com.au>
+ * hw_com.c: Update event handling.
- * sim_calls.c, main.c: Add -g (trace_gdb) option, add tracing to
- most of the other functions in sim_calls.c.
+ * hw_disk.c: Implement tracing.
+
+Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device_table.c (generic_device_init_address): Use
+ assigned-addresses property in preference to any other reg
+ property.
- * basics.h (CONCAT3), memory_map.c, memory_map_n.h, Makefile.in:
- Add macros to better cover up `generic' code. Makes it possible
- to step through the generic code!
+Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.h, device.c (device_find_ranges_property): New function.
+ Simplify the manipulation of "ranges" properties.
+
+ * device.c (device_add_parsed): Extend to include support for the
+ ranges property.
- * vm.c, vm_n.h, Makefile.in: ditto
+ * device.c (device_add_parsed): Add assigned-addresses to the list
+ of reg type properties.
-Tue Oct 10 15:42:59 1995 Andrew Cagney <cagney@highland.com.au>
+ * device.c (device_tree_print_device): Add code to format and
+ print a ranges property.
+
+ * device.h, device.c (device_nr_address_cells,
+ device_nr_size_cells): New functions. Determine the values of the
+ standard properties #address-cells and #size-cells. Both of which
+ are optional and have default values of two and one respectfuly.
+ Previously, code that determined #address-cells was incorrectly
+ using a value of one.
- * devices.h, devices.c, memory_map.h, memory_map.c: Changed
- callback interface so that there is a read/write buffer but no
- read/write_word. VEA default memory read/write handler sometimes
- couldn't resolve an access and of those some were for a memory
- fault and some were because gdb was making a bogus request.
+Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * devices.h, devices.c, memory_map.h, memory_map.c, vm.h, vm.c:
- eliminate transfer_mode (raw or cooked) parameter from read/write
- buffer.
+ * debug.h, debug.c: Sort debug options, Add entries for the
+ comming PHB device.
-Fri Oct 6 20:23:56 1995 Andrew Cagney <cagney@highland.com.au>
+Fri Oct 18 12:12:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-instructions (Floating Select): Add support for fsel unless
+ model is 601. Allow user to filter out instruction unless -Fs is
+ passed to igen.
+ (Store Floating-Point as Integer Word Indexed): Raise optional
+ instruction program abort. Allow user to filter out instruction
+ unless -Fs is passed to igen.
+ (Floating Square Root{, Single}): Ditto.
+ (Floating Reciprocal Estimate Single): Ditto.
+ (Floating Reciprocal Square Root Estimate): Ditto.
+
+ * configure.in (--enable-sim-filter): If not passed, pass 32,f,s
+ to igen.
+ * configure: Regenerate.
- * ppc-instructions (fmul, fmuls): correct instruction format - had
- FRB instead of FRC.
+ * interrupts.h (program_interrupt_reasons): Add
+ optional_instruction_program_interrupt.
-Wed Oct 4 17:31:12 1995 Andrew Cagney <cagney@highland.com.au>
+ * interrupts.c (program_interrupt): Call error with more detailed
+ information on program interrupts, particularly in user mode. Add
+ support for optional_instruction_program_interrupt.
- * psim.c, device_tree.h, device_tree.c, devices.c (printd_*,
- scand_*): new functions to parse/print fields in device names
- while hiding any machine dependency.
+Wed Sep 25 10:20:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * devices.c, psim.c: Change the stack init code so that it is
- handled by a device. Arguments passed across using a device ioctl
- (hack).
+ * hw_glue.c: New device. Hooks for manipulating interrupt ports.
- * devices.h, devices.c: device ioctl callback changed to allow a
- variable number of arguments. This gives greater flexability and
- greater chance of bugs.
+ * debug.h, debug.c (trace_glue_device): Add tracing support for
+ the interrupt glue logic device.
-Tue Oct 3 22:01:56 1995 Andrew Cagney <cagney@highland.com.au>
+ * configure.in (hardware): Add glue device.
+ * configure: Regenerate.
- * main.c (printf_filtered, error): Missing va_end() to close off
- variable argument use.
+Tue Sep 24 20:55:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (tmp-gencode): comment out hack to get around some
- versions of make not handling files being created as side-effects.
+ * device.c (device_tree_parse_integer_property): New function,
+ parse a list of integers as an array property.
+ (device_tree_add_parsed): Call it.
- * gen.c (lf_open): Add -n (real_file_name) option. Specifies an
- alternative file name to use in output files for things like #line
- macros.
+ * device.c (device_tree_parse_string_property): New function,
+ parse a list of strings as a string property (with embeded
+ null's). For moment, don't try to implement a complext string
+ parser.
+ (device_tree_add_parsed): Call it.
- Makefile.in (tmp-gencode): Use gen -n so that debug info is
- correct.
+Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (TARGETLIB): Use this instead of libsim.a in the
- Makefile.
+ * hw_opic.c: New file. OpenPIC interrupt controller.
-Sat Oct 7 22:40:59 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * configure.in (hardware): Add opic device.
+ * configure: re-generate.
- * sim_calls.c (sim_set_callbacks): Define new function.
+ * hw_pic.c: Delete, replaced with hw_opic.c.
-Fri Oct 6 17:23:10 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * debug.h, debug.c: Add debug option for OpenPIC device. -
+ opic-device.
- * psim.c (psim_print_info): Print exit status or signal number.
+Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Mon Oct 2 11:46:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * Makefile.in (psim.o, idecode.o): Since idecode and not psim is
+ now the file that does all the inlining.
- * cpu.c (struct _cpu): Add number_of_insns field to trace how many
- instructions are executed.
- (cpu_increment_number_of_insns): New function to increment the
- number of instructions issued.
- (cpu_get_number_of_insns): New function to return the number of
- instructions issued.
- (cpu_print_info): New function to print cpu related information.
- At present, print the number of instructions executed.
+ * Makefile.in (LIB_SRC, LIB_INLINE_SRC, idecode.o): Break out the
+ library source code that could be involved in an inlining. Make
+ idecode.o only dependant on the inlined library source code.
- * gen_idecode_c: Emit call to cpu_increment_number_of_insns within
- idecode_issue.
+ * Makefile.in (LIB_OBJ): Put options last on the list so that it
+ is compiled last.
- * psim.c (psim_print_info): New function to iterate over each of
- the CPU's calling cpu_print_info.
-
- * psim.h,cpu.h: Add new declarations.
+ * std-config.h (DEVICE_INLINE): Only inline locals when the
+ default is to inline.
+
+Mon Sep 23 00:37:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_htab.c (htab_sum_binary): Determine the real-base for the
+ binary.
+
+ * hw_htab.c (htab_map_binary): Depending on the value of the
+ load-base, either map the program in as a contiguous section or as
+ separate sections controled by th binaries lma values.
+ (htab_init_data_callback): Ditto.
+
+Sun Sep 22 15:56:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_generic.c (emul_add_tree_options): Remove load-base option.
+
+ * emul_chirp.c (map_over_chirp_note): Add load_base field to note
+ struct. Don't require the load_base field to be present - just
+ issue warning - it is a recent addition.
+ (emul_chirp_create): Support both virtual and physical modes.
+
+ * emul_chirp.c (emul_chirp_create): Add a stack initialization
+ property so that any arguments specified on the command line can
+ be passed on to user programs.
+
+ * hw_init.c (create_ppc_chirp_bootargs): Add support for chirp
+ argument passing to the pseudo device stack.
- * sim_calls.c (sim_open): Add argument processing to add the same
- switches main.c accepts for the standalone processor.
- (sim_close): Call psim_print_info if -I.
+Sat Sep 21 19:39:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * main.c (main): Add comment saying to update sim_calls.c when
- adding switches. Add -I to call psim_print_info when done.
- (usage): Update usage message.
+ * device.c (device_error): Make it more tolerant to incomplete
+ devices.
-Sun Oct 1 13:52:59 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * hw_init.c (hw_data_init_data_callback): Extend the data device
+ so that it can perform initialization operations either dma or a
+ more complex instance open, seek, write operation.
+ * hw_init.c: Update the description of the data device to reflect
+ this.
- * main.c (printf_filtered): Correct to match new prototype.
+Sat Sep 21 00:13:02 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Sat Sep 30 20:47:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * device.c (device_event_queue_schedule,
+ device_event_queue_deschedule, device_event_queue_time): Have the
+ device object export the event operations. Making these available
+ from the device object should hopefully simplify writing device
+ models.
- * sim_callbacks.h (printf_filtered): Correct prototype.
+Fri Sep 20 14:04:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Thu Sep 21 16:26:49 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * configure.in (sim-hardware): Add eeprom device to default build.
- * device_tree.c (OEA_MEMORY_SIZE): Define if not defined to
- 0x100000.
- (clayton_memory_size): Define as OEA_MEMORY_SIZE.
+ * hw_eeprom.c: Rewrite so it works.
- * std-config.h (WITH_TRACE): Default to 1 now.
+ * debug.h, debug.c: Add tracing support for the eeprom and com
+ devices.
- * psim.c (write_stack_arguments): Don't write any stack arguments
- if OEA.
+Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * main.c (main): Switch to using getopt. Make -p also set
- trace_semantics. Make -a turn on all trace flags. Make -C turn
- on console tracing.
+ * debug.h: Add disklabel-package and disk-device trace options.
+ debug.h (PTRACE): Add macro to simplify tracing in packages.
- * device_tree.c (create_option_device_node): Assume a program is
- OEA if the start address is < 4096, not just == 0.
+Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Wed Sep 20 13:36:06 1995 Ian Lance Taylor <ian@cygnus.com>
+ * device.c (device_create_instance_from): Tighten up loop
+ searching for device instances.
+ (device_instance_delete): Ditto.
+ (device_instance_delete): Only leaf instances need to be removed
+ from a devices list of active instances.
- * Makefile.in (maintainer-clean): New synonym for realclean.
+Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
-Sun Sep 10 10:23:56 1995 Michael Tiemann <tiemann@axon.cygnus.com>
+ * hw_disk.c: Add the cdrom as an alias.
- * registers.c (register_description): Add gdb synonyms for cr
- (cnd) and msr (ps).
+ * pk_disklabel.c (disklabel_delete): Implement, remembering to
+ delete the raw disk instance while we're at it.
-Fri Sep 8 13:16:10 1995 Ian Lance Taylor <ian@cygnus.com>
+ * pk_disklabel.c (pk_disklabel_create_instance): Implement a
+ little bit more - still a long way to go.
- * Makefile.in (install): Don't install in $(tooldir).
+ * pk_disklabel.c (disklabel_write, disklabel_read): Remember the
+ new head position after a read or write.
- * configure.in: Call AC_CONFIG_HEADER. Don't try to use
- bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
- AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES, AR,
- and CC_FOR_BUILD. Call AC_CHECK_HEADERS for various header files.
- Touch stamp.h if creating config.h.
- * configure: Rebuild.
- * config.in: New file, created by autoheader.
- * Makefile.in (AR): Define as @AR@.
- (CC): New variable, defined as @CC@.
- (CFLAGS): Define as @CFLAGS@.
- (CC_FOR_BUILD): New variable, defined as @CC_FOR_BUILD@.
- (RANLIB): Define as @RANLIB@.
- (HDEFINES, TDEFINES): New variables.
- (@host_makefile_frag@): Remove.
- (mostlyclean): Make the same as clean, not distclean.
- (clean): Remove config.log.
- (distclean): Remove config.h and stamp-h.
- (Makefile): Don't depend upon @frags@. Just rebuild Makefile when
- invoking config.status.
- (config.h, stamp-h): New targets.
- (gen, gen.o): Build with CC_FOR_BUILD, not CC.
- (ppc-config.h): Rename from old config.h build.
- * (basics.h,gen.c,ppc-endian.c,psim.c): Include ppc-config.h.
+Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_chirp.c (chirp_emul_read): Allow reads to be longer then
+ the internal buffer.
+
+Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_chirp.c (chirp_read_t2h_args): Call memset-0 with the args
+ in the correct order.
+
+ * emul_chirp.c (chirp_emul_call_method): Correct computation for
+ the address of the first stack argument passed in from the client
+ program.
+
+Wed Sep 18 19:33:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * words.h: Add new types signed_cell and unsigned_cell which
+ correspond to the signed and unsigned IEEE 1275 memory locations.
+ * device.h, device.c, emul_chirp.c: Where refering to an IEEE 1275
+ memory cell, replace uses of unsigned32 with unsigned_cell.
+ * device_table.h: Ditto.
+
+ * sim-endian.h: Add new macros H2BE_cell and BE2H_cell which
+ convert cell sized values to from big endian.
+ * device.c, emul_chirp.c: Where refering to IEEE 1275 memory cells
+ use these new macros.
+
+Tue Sep 17 15:57:44 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (device_tree_add_parsed): Detect and report an
+ interrupt being attached to an invalid device. Was dumping core.
+
+Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.h, device.c (device_address_to_attach_address,
+ device_size_to_attach_size): New functions. Convert a devices
+ unit address or unit size structure into a form suitable for
+ passing on to the attach and detach functions.
+ * device_table.h: Add extra methods to device table.
+
+ * device.h, device.c (device_find_reg_property): New function.
+ For a reg type property, return the selected address + size
+ tupple, along with a positive success status. Add a reg_property
+ to the list of property types.
+ * (device_tree_add_parsed): Make array properties with the name
+ reg or alternate-reg of type reg_property.
+
+ * hw_memory.c (hw_memory_init_address): Rewrite to use new
+ find_reg_property method.
+ * hw_nvram.c (hw_nvram_init_address): Ditto.
+
+ * device.c (device_tree_print_device): Add code to print out a reg
+ property.
+
+ * device_table.c (generic_device_address_to_attach_address,
+ generic_device_size_to_attach_size ): New functions. Generic
+ functions for converting between unit and attach address or size.
+
+ * device_table.c (generic_device_init_address): Rewrite to use the
+ new find_reg and address convert functions. Look for both reg and
+ alternate-reg properties.
+
+Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_com.c: New file. A '550 serial device that can quickly be
+ attached to any bus.
+ * configure.in (enable-sim-hardware): Add the com device.
+ * configure: re-generate.
+
+Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (device_tree_verify_reg_unit_address): New
+ function. Check that the unit address as specified by the reg
+ property correctly corresponds to any unit address previously
+ specified by the devices name.
+ (device_tree_add_parsed): When adding a reg property, verify
+ that the unit-address - first value of property - correctly
+ matches any previous value specified when creating the device
+ node.
+
+Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * mon.c (mon_event): Remove assertion that an unsigned is >= 0.
+
+Fri Aug 16 12:05:24 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * device.c (device_full_name): Cast strdup to char *, since AIX
+ 3.2.5 mistakenly declares the function to be const char *.
+ (device_create_from): Ditto.
+ (device_create_instance_from): Ditto.
+ (device_add_property): Ditto.
+
+Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * debug.c (trace_option): For -t all, do not set the
+ trace_dump_device_tree flag, so that the simulator is run.
+
+Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (options.o): Depend on defines.h.
+ (defines.h): New rule, go through config.h and make strings of all
+ of the #define HAVE_xxx macros.
+ (distclean): Remove defines.h.
+
+ * options.c (print_options): Print whether many of the
+ configuration macros are defined.
+
+ * main.c (main): If -t options and no filename, just print the
+ options, and don't print the usage message.
+
+Mon Aug 12 18:42:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in: Test whether /dev/zero works on the system, and if
+ it does, define HAVE_DEVZERO.
+ * configure: Regenerate.
+
+ * emul_generic.c (emul_add_tree_hardware): Do not add /iobus/disk
+ if we don't have a working /dev/zero on the system.
+
+ * emul_bugapi.c (emul_bugapi_init): If HAVE_DEVZERO is not
+ defined, don't add disk support.
+ (emul_bugapi_do_diskio): Ditto.
+ (emul_bugapi_instruction_call): Ditto.
+
+Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * emul_unix.c (HAVE_TCGETATTR): If HAVE_TERMIOS_STRUCTURE is not
+ defined, make sure HAVE_TCGETATTR is #undef'ed
+
+Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * std-config.h (REGPARM): Only define REGPARM attributes if using
+ GNU C. Test for __i686__ in case GCC ever defines it. If not on
+ a x86 platform, define REGPARM as nothing.
+
+ * sim-endian.h (WITH_HOST_BYTE_ORDER): Test for i686 and __i686__
+ also.
+
+Wed Aug 7 20:19:55 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * ld-decode.h, ld-decode.c: Rename goto_gen to the more correct
+ goto_switch_gen.
+ * gen-idecode.c: Ditto.
+
+ * gen-idecode.c (print_idecode_table): Comment out check for
+ switch/table combination until a bug with it is fixed.
+
+ * ppc-opcode-goto: New file. Like complex and flat but uses
+ goto-switch instead of padded-switch for the tables.
+
+ * gen-idecode.c (print_goto_switch_name): New function.
+ (print_goto_switch_table_leaf): New function.
+ (print_goto_switch_break): New function.
+ (print_goto_switch_table): New function. Prints a jump table
+ that can be jumped into instead of a switch statement.
+
+ * gen-idecode.c (*switch_*): As an option output a switch that is
+ implemented using a jump table but only if the switch is not
+ boolean.
+
+Tue Aug 6 09:28:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (--enable-sim-{hardware,packages}): Fix typos.
+ * configure: Regenerate.
+
+ * device.c (device_instance_call_method): Fixup format message in
+ error case. Return 0 in case of error to shut up compiler
+ warnings.
+
+Wed Aug 7 00:17:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device_table.c (generic_device_unit_decode): Require a comma
+ between elements of a unit address.
+
+ * device.c (device_tree_print_device): For reg, alternate-reg and
+ ranges properties use special print functions.
+ (device_print_ranges_property): Print formatted ranges property.
+ (device_print_reg_property): Print formatted reg property.
+
+Tue Aug 6 21:35:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (device_tree_add_parsed): For reg, ranges and
+ alternate-reg properties use a special parser.
+ (device_tree_parse_reg_property): New function to parse a reg
+ property.
+ (device_tree_parse_ranges_property): New function to parse a
+ ranges property.
+ (device_encode_unit): Wrapper for encode_unit callback.
+ (device_decoce_unit): Wrapper for decode_unit callback.
+
+Wed Jul 31 00:02:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device_table.h (device_instance_callbacks): Relace the claim and
+ release methods with a more general table mapping from method-name
+ to method-function.
+
+ * device.c (device_instance_call_method): New function. Implement
+ the OpenBoot call-method client interface. Attempts to locate the
+ instances method in the callback table.
+ (device_instance_claim, device_instance_release): Delete.
+ Replaced with call-method and a lookup table.
+
+ * emul_chirp.c (chirp_emul_call_method): Use the new device
+ instance call method and let that handle a client claim call.
+
+ * hw_htab.c (claim_memory): Wrapper function to call the memory
+ devices "claim" method using the new device-instance call-method
+ interface. Replaces the previous direct calls to claim.
+ (htab_map_region): Use claim_memory.
+ (htab_init_data_callback): Ditto.
+
+ * hw_memory.c (hw_memory_instance_claim): Update function
+ interface so that it is compatible with call-method.
+ (hw_memory_instance_release): Ditto.
+ (hw_memory_instance_methods): New table of memory specific
+ methods claim and release. Add to the hw_memory_callback
+ table.
+
+Tue Jul 30 21:26:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * psim.c (psim_init): Back out of change to initial value of
+ system->last_cpu.
+
+Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * sim_callbacks.h (sim_io_printf_filtered): Replace
+ printf_filtered with a local simulator specific version. Add
+ #define printf_filtered to simplify updating of existing code.
+
+ * sim_callbacks.h (sim_io_write_stdout, sim_io_read_stdin,
+ sim_io_write_stderr): New functions. Read / write to the
+ simulations stdin and stdout and stderr interfaces. Merge in code
+ from hw_pal that previously handled async I/O.
+ (sim_io_flush_stdoutput): Rename flush_stdoutput. Add #define
+ flush_stdoutput to simplify updating of existing code.
+
+ * hw_pal.c (scan_hw_pal, write_hw_pal,
+ hw_pal_instance_write_callback): Use the new sim_io functions.
+
+ * main.c: Implement standalone versions of the new sim_io
+ functions. Include support for async I/O.
+ * sim_calls.c: Ditto. This time using the gdb callback table.
+
+ * std-config.h (CURRENT_STDIO, current_stdio): New macro. Set up
+ stdio configuration so that it works in the same way as the rest
+ of the simulation.
+ * psim.c (psim_create): Initialize current_stdio from the device
+ tree.
+ * emul_generic.c (emul_add_tree_options): Enter a default value
+ for use-stdio in the device tree.
+
+Fri Jul 26 19:43:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * gen-idecode.c (print_jump): Was always generating a jump back to
+ idecode. Only necessary at tail of semantic code.
+ (print_jump): Was always setting the processor's cia, even during
+ startup when the processor was still undefined.
+ (print_jump): For safety, restart smp loop when cpu_nr >= nr_cpus,
+ not just equal.
-Fri Sep 8 09:51:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * options.c (print_options): Add printing of WITH_REGPARM and
+ WITH_STDCALL.
+
+ * std-config.h (WITH_REGPARM, WITH_STDCALL): Provide default
+ (disabled) values if not defined.
+
+Fri Jul 26 00:36:35 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * ppc-cache-rules (cache): Change RS and RB to cache instead of
+ compute. The block move instructions use them.
+
+ * idecode_expression.h (FPSCR_SET): New macro, set specific FPSCR
+ register.
+ (CR_FIELD): New macro, extract specific CR register.
+ (FPSCR_FIELD): New macro, extract specific FPSCR register.
+
+ * registers.h (GPR): New macro, simplify accesses to GPR[i].
+
+ * bits.c (INSERTED): Covert INSERTED macro into a function.
+ (EXTRACTED): Conditionally compile on correct bit size macro.
+
+ * bits.h (BIT8): New macro, set a single bit in an 8 bit byte.
+
+ * ppc-instructions: With hints from Paul Martin, type in missing
+ some instruction semantics. Leave disabled for the moment.
+ (Load Multiple Word): Ditto.
+ (Store Multiple Word): Ditto.
+ (Load String Word Immediate): Ditto.
+ (Load String Word Indexed): Ditto.
+ (Store String Word Immedate): Ditto.
+ (Store String Word Indexed): Ditto.
+ (Move to Condition Register from XER): Ditto.
+ (Move From Condition Register): Ditto.
+ (Move From FPSCR): Ditto.
+ (Move to Condition Register from FPSCR): Ditto.
+ (Move To FPSCR Field Immediate): Ditto.
+ (Move To FPSCR Fields): Ditto.
+ (Move To FPSCR Bit 0): Ditto.
+ (Move To FPSCR Bit 1): Ditto.
+
+Thu Jul 25 22:10:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * std-config.h (SEMANTICS_INLINE): By default, mask out the
+ inlining of semantic functions from DEFAULT_INLINE. Almost all
+ configurations call the semantic code via a pointer so there is
+ little benefit.
+
+ * std-config.h (ICACHE_INLINE): Ditto.
+
+Thu Jul 25 20:07:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * configure.in (sim_regparm): Add configuration option for
+ enabling GCC's regparm attribute.
+ * (sim_stdcall): Add configuration option for enabling GCC's
+ stdcall attribute.
+
+ * Makefile.in (REGPARM_CFLAGS): Pass regparam configuration onto
+ compilations.
+ * (STDCALL_CFLAGS): Pass stdcall configuration onto compilations.
- * configure{,.in}: Don't include sysdep.h from bfd, since bfd no
- longer provides it.
- * basics.h (sysdep.h): Don't include it.
- * Makefile.in (BASICS_H): Remove sysdep.h.
+ * std-config.h (REGPARM): Extend construction of REGPARM macro so
+ that it can include __stdcall__ function attribute.
-Wed Sep 6 13:25:42 1995 Andrew Cagney <cagney@highland.com.au>
-
- * core.c (core_add_data): First growth of bss was being put at
- wrong address (0) instead of &end.
-
- * core.c (core_add_stack, core_add_data): Was not handling case
- where bss/stack is grown across the current end-of-{bss,stack}.
+Wed Jul 24 19:04:20 1996 Andrew Cagney <cagney@sawnoff>
-Wed Sep 6 00:46:10 1995 Andrew Cagney <cagney@highland.com.au>
+ * options.c (print_options): Include SUPPORT_INLINE in information
+ dump.
- * system.c (system_call): Fix SYS_break - was aligning bss to a
- page boundary instead of just an 8 byte one; On first call sbrk(0)
- != sbrk(0).
+ * gen-idecode.c (print_run_until_stop_body): Only generate loop
+ termination test if creating idecode_run_until_stop. Push the
+ loop termination test back into each alternative branch.
-Thu Aug 24 14:48:54 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+Wed Jul 24 15:47:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * Makefile.in (install): Fix install rule.
+ * gen-icache.c (print_icache_function): Have the cache function
+ always update the cache_entries semantic and address fields.
-Tue Aug 22 09:31:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+ * gen-idecode.c (print_idecode_switch_illegal): Include a break
+ when generating illegal instructions. This was commented out
+ which is a hangover from looking a at switch statements generated
+ using indirect jumps.
- * system.c (system_call): Add read support.
+Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * main.c (main): -t sets trace_device_tree. Correct usage message
- to current reality.
+ * igen.c (print_my_defines): Replaces print_define_my_index.
+ Print both a definition for MY_INDEX and MY_PREFIX.
+ * gen-icache.c (print_icache_function): Adjust.
+ * gen-idecode.c (print_jump_insn): Adjust.
+ * gen-semantics.c (print_c_semantic): Adjust.
- * device_tree.c (update_memory_node_for_section): Make tracing
- output line up. If not code or readonly, assume that the section
- is a data section and has read/write permissions. Add readonly
- support.
+ * gen-support.c (gen_support_h): Add optional include to created
+ support.h so that, like cpu, it is optionally inlined for all
+ modules that include it.
+ * inline.h, inline.c: Adjust so that support.[hc] is handled the
+ same as cpu.[hc].
- * core.c (create_core_from_addresses): Print end address in traces
- and make tracing output line up.
+ * idecode_fields.h (LABEL, GOTO): Macro's that create a unique
+ name for a lable and then branch to it.
- * Makefile.in: Rewrite from Makefile to work with the Cygnus
- environment, and support compiling in a different directory than
- the sources reside in.
+ * ppc-instructions (convert_to_integer, Floating Round to
+ Single-Precision, Floating Convert from Integer Doubleword): Use
+ LABEL and GOTO instead of the recently added switch statements.
- * ppc-endian.h: Rename from endian.h so that it doesn't get
- confused with /usr/include/sys/endian.h on Linux. Add Linux
- endian support.
+Wed Jul 24 14:02:42 1996 Andrew Cagney <cagney@sawnoff.highland.com.au>
- * ppc-endian.c: Rename to be consistant with ppc-endian.h.
- Include ppc-endian.h, not endian.h.
+ * gen-idecode.c (print_run_until_stop_body): Too many rparen in
+ generated code.
- * basics.h (sysdep.h): Include sysdep.h that configure makes.
- Include ppc-endian.h, not endian.h.
+Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * std-config.h: Rename from ppc-config. Put #ifndefs around most
- configuration macros, so they can be overridden via CFLAGS. By
- default, turn off tracing.
+ * configure.in (--enable-sim-line-nr): Typo - sim_line-nr.
+ * (--enable-sim-inline): Reorder patern matching of arguments so
+ that SUPPORT=ALL_INLINE is reconized as *=* and not *_INLINE.
+
+ * configure: rebuild.
+
+Mon Jul 22 23:25:08 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * configure.in (--enable-sim-hardware, --enable-sim-packages): New
+ configuration options. Let the user specify the packages or
+ hardware devices that are to be included in the build. Makes it
+ possible for user packages to be specified.
+
+ * Makefile.in (tmp-pk, tmp-hw): Just use the list of packages and
+ hardware instead of checking it using ls. configure.in should
+ have taken care of any problems.
+ (HW_SRC, HW_OBJ, PACKAGE_SRC, PACKAGE_OBJ): Set by configure.
+
+Mon Jul 22 22:38:59 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * psim.c (psim_options): Enter the argument to the memory size
+ option directly into the device tree. Was using atol() which is
+ dangerously non portable.
+
+Mon Jul 22 22:17:08 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * configure.in (icache): Extend icache flag to include an insn
+ option. If specifyed the insn - aka instruction - is included in
+ the instruction cache. Make this the default.
+ * configure: re-generate.
+
+ * igen.c (main), igen.h: Add option -S - inSn - for specifying
+ that the instruction should be included in the icache.
+
+ * gen-icache.c (print_icache_body): If enabled, output code to put
+ the instruction into the icache.
+ (print_icache_struct): If enabled, add insn to the icache struct.
+
+Mon Jul 22 20:46:12 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * Makefile.in (BUILD_CFLAGS): Include -g when building the
+ generators.
+
+Mon Jul 22 20:00:25 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * emul_generic.c (emul_add_tree_options): Was incorrectly setting
+ the strict-alignment option when hardwired for non-strict
+ alignment.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * gen-semantics.c: Make the my_index variable a macro MY_INDEX.
+
+ * ppc-instructions: Adjust so that references are to MY_INDEX and
+ not my_index.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * gen-idecode.c: Output the complete run_until_stop function
+ instead of just the code to handle a single instruction issue.
+ * : Have the generated idecode.c include inline.c (instead of psim.c).
+
+ * std-config.h: Change psim.c so that it isn't inlined (as this is
+ no longer needed).
+
+ * psim.c (run_until_stop): Delete the old run_until_stop function
+ instead calling the idecode_run and idecode_run_until_stop
+ functions that gen-idecode.c is now creating.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * dgen.c: Maintenance - update to use new features found in lf.c.
+
+ * filter_filename.c (filter_filename): Maintenance - make the
+ string constant.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * debug.c (TRACE, ITRACE, DTRACE): Have GCC instead of CPP
+ eliminate trace statements.
+
+ * debug.c: Change trace format so that it is consistent
+ (file:line-nr) with CC's error output.
+
+ * gen-itable.c (itable_c_insn): Add the source file name and
+ source line number to the instruction's informational entry.
+
+ * debug.c (ITRACE): Use the itable (and my_index) to get the
+ current instructions name and source line number.
+
+ * gen-semantics.c, gen-icache.c: Adjust generated ITRACE calls to
+ match new interface.
+
+ * emul_bugapi.c (emul_bugapi_instruction_call): Adjust
+ corresponding call to ITRACE so that it still matches.
+
+ * idecode_expression.h (ALU_END, CR0_COMPARE): Use TRACE instead
+ of ITRACE. The CPP line directives would have previously set the
+ line-nr and file name so ITRACE isn't needed.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * gen-idecode.c (print_jump_until_stop_body): New function and
+ idecode generation option. Instead of generating and calling
+ separate functions containing the semantic and icache code
+ generate a single monolythic function and use goto's (and GCC's
+ indirect jump) to move between code blocks.
+
+ * Makefile.in: Add sim_jump flag to those passed to igen.
+
+ * configure.in: New option --enable-sim-jump (default disabled)
+
+ * ppc-instructions: Eliminate any uses of labels and goto's.
+ These result in duplicate declarations when a single flat function
+ is being create.
+
+ * ppc-opcode-jump: New file. Set of opcode rules useful when
+ testing jumping idecodes.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * gen-idecode.c: Optionally include the semantic code for an
+ instruction in the function that is doing the decoding.
+
+ * igen.c: Add option (-C) to generate semantics in the instruction
+ decode functions.
+
+ * configure.in (--enable-sim-icache): Accept an option list such
+ as 1024,define. Add a new choice to the list - semantic - which
+ will cause igen to generate instruction decode functions that
+ include the corresponding semantic code.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * configure.in: New option --enable-sim-line-nr (default enabled).
+ Enable/disable the inclusion of CPP line directives in the
+ generated files. Such directives refer back to the source files
+ used when generating the simulator code.
+
+ * Makefile.in (sim_line_nr): Pass to igen.
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * igen.c (main): Revamp the options so that more letters are
+ available.
+
+ * configure.in: Adjust to match igen's revamped options
+
+Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * Makefile.in (pk.h, hw.h): Rewrite depenencies for hw.h (etc) so
+ that they use the same technique as igen (ie a dummy targets
+ tmp-pk and tmp-hw are created).
+
+Mon Jun 24 22:28:00 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * Makefile.in (BUILD_CFLAGS): Include WARNING_CFLAGS.
+
+Wed Jun 19 21:45:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * ld-cache.[hc], ld-decode.[hc], ld-insn.[hc]: New files. Separate
+ out the loading of each of the tables from the rest of igen.
+ * Makefile.in: Adjust.
+ * igen.c: Adjust.
+
+ * gen-icache.[hc], gen-idecode.[hc], gen-itable.[hc],
+ gen-model.[hc], gen-semantics.[hc]: New files. Separate out the
+ code creating each separate set of generated files.
+ * Makefile.in: Adjust.
+ * igen.c: Adjust.
+
+ * gen-support.[ch]: New files. Output the support functions (found
+ in the ppc-instructions file) into a separate file.
+ * Makefile.in: Add.
+ * inline.h, inline.c: Add.
+ * std-config.h: Add.
+
+ * ld-cache.c: Re-design the cache table format.
+ * ppc-cache-rules: Update to new format.
+
+ * ld-decode.c: Re-design the decode table format.
+ * ppc-opcode-simple: Update to new format
+ * ppc-opcode-complex: Ditto
+ * ppc-opcode-flat: Ditto
+
+ * filter.h, filter.c: New files. Separate the opcode filter table
+ reading code from the rest of igen.c. Re-design the filter so that
+ it works inclusivly not exclusivly.
+ * igen.c: Remove the opcode filter table loading code.
+ * Makefile.in (filter.o): Adjust
+ * configure.in: Adjust filter flag so that default includes 32bit
+ and floating point.
+ * ppc-instructions: Clean up filter fields so that only in use
+ entries are specifed (ie delete `be').
+
+ * misc.c (name2i, i2name): New function. Map between a string and
+ an integer value.
+
+Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * sim_calls.c (sim_close): If simulator not created, skip printing
+ of run information.
+
+Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * registers.c (register_description): Typo, insns not insn.
+
+ * ppc-instructions (model_get_number_of_stalls): New model function,
+ returns number of stalls for the specified processor.
+ * psim.c (psim_read_register): Add call to new function
+ model_get_number_of_stalls().
+
+ * ppc-instructions (model_get_number_of_cycles): New model function,
+ returns number of stalls for the specified processor.
+ * psim.c (psim_read_register): Add call to new function
+ model_get_number_of_cycles().
+
+Fri Jun 14 00:11:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device_table.h: Don't pass the parent device into a devices
+ create function. This makes the create function consistent with
+ the documentation.
+ * device.c (device_template_create_device): Ditto
+ * hw_pal.c (hw_pal_create): Ditto
+ * hw_core.c (hw_core_create): Ditto
+ * hw_vm.c (hw_vm_create): Ditto
+ * hw_disk.c (hw_disk_create): Ditto
+ * hw_nvram.c (hw_nvram_create): Ditto
+ * hw_memory.c (hw_memory_create): Ditto
+ * hw_cpu.c (hw_cpu_create): Ditto.
+
+ * device.c (split_find_device): Allow a null initial parent device.
+ (device_template_create_device): Ditto.
+
+ * device.c (device_create_from): Make local (static) only used
+ within device.c.
+ * device_table.h: typedef device_callbacks moved here (from
+ device.h) where it belongs.
+
+ * hw_core.c: New file. Implements just the core device using the
+ core object.
+
+ * corefile.c: Moved all core device functions into the new
+ hw_core.c file. core_device_create() disapears.
+
+ * psim.c (psim_tree): Use device_tree_add_parsed() to create the
+ core device.
+
+Thu Jun 13 00:09:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_init.c: Correct typo in comment.
+
+ * corefile.c (core_init): Remove any remaining references to a
+ default map.
+ (core_map_find_mapping): Ditto.
+
+Wed Jun 12 22:30:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * corefile.c (core_init): Make function global so that other
+ devices are able to use the full core object.
+
+ * corefile.c (core_create, core_from_device): Break core_create
+ into two functions. The first creates a core object, the second
+ returns the core object associated with a core device.
+
+ * corefile.c (core_device_create): Use core_create to make the
+ core object.
+
+ * psim.c (psim_create): Use core_from_device() instead of
+ core_create().
+
+ * device.c (device_template_create_device): Make static as only
+ needed by functions internal to device.c.
+
+Fri Jun 7 23:47:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * ppc-opcode-test-2: Remove description of fields.
+ * ppc-opcode-complex: Ditto
+ * ppc-opcode-flat: Ditto
+ * ppc-opcode-simple: Ditto
+ * ppc-opcode-stupid: Ditto
+ * ppc-opcode-test-1: Ditto
+ * ppc-cache-rules: Ditto
+
+ * igen.c: Add description of files as a comment at the front.
+
+Wed Jun 26 12:50:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in: Check for whether the termios and termio
+ structures are really defined, and whether or not, they define the
+ c_line field.
+ * configure: Regenerate.
+
+ * Makefile.in ({,TERMIO_}CFLAGS): Add TERMIO_CFLAGS options set by
+ configure.
+
+ * emul_unix.c: Various changes to allow for building on systems
+ with different termio and termios structures. If host has both
+ termio and termios, just use termios. No longer include
+ sys/ioctl.h.
+
+Wed Jun 26 12:26:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
+ INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
+ (docdir): Removed.
+ * configure.in (AC_PREREQ): autoconf 2.5 or higher.
+ (AC_PROG_INSTALL): Added.
+ * configure: Rebuilt.
+
+Wed Jun 5 23:53:42 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * corefile.h: Rewrite documentation so that it can be extracted and
+ converted into texinfo (and hence ready for translation into html,
+ tex or nroff).
+ * device.h: Ditto
+
+Thu Jun 6 09:52:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * hw_disk.c (SEEK_SET): If SEEK_SET is not defined, define as 0.
+
+Wed Jun 5 11:46:52 1996 Andrew Cagney <cagney@puddin>
+
+ * hw_disk.c: Include <unistd.h> if available. Under SunOS, that
+ is the source of SEEK_SET.
+
+Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * psim.c (psim_options): Correct type of dummy arguments being
+ passed to a device_ioctl call.
+
+ * hw_init.c (hw_data_init_data_callback): Adjust printf arguments.
+ (write_stack_arguments): Ditto.
+ * hw_trace.c: Instance callback entry no longer a table.
+
+Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_unix.c (do_unix_umask): Cast printf argument.
+ (convert_to_linux_termios): Use LINUX_VSWTC not LINUX_VSWCH
+
+Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * hw_init.c (update_for_binary_section): Abort if we find an
+ .interp section, which indicates the need for shared libraries to
+ be loaded.
+
+Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * emul_unix.c (do_unix_{time,gettimeofday,getrusage}): Add support
+ for time, gettimeofday, and getrusage system calls.
+ ({solaris,linux}_descriptors): Add new system calls.
+ (do_get{,e}{uid,gid}): Use gid_t/uid_t types.
+ (do_get{,p}pid): Use pic_t types.
+
+ * configure.in (AC_TYPE_{GETGROUPS,SIGNAL}): Define.
+ (AC_TYPE_{MODE,OFF,PID,SIZE,UID}_T): Define.
+ * config{.in,ure}: Regenerate.
+
+Mon Jun 3 23:19:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_netbsd.c (emul_netbsd_create): Use the more specific names
+ `ppc-elf' and `ppc-xcoff' for the stack-type.
+ * emul_unix.c (emul_unix_create): Ditto.
+ * emul_bugapi.c (emul_bugapi_create): Ditto.
+ * hw_init.c: Reconize the new names.
+
+ * emul_unix.c (do_unix_break): Adjust so that the updated ioctl
+ call is used (no system parameter).
+
+Sun Jun 2 11:21:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * emul_unix.{h,c}: New files to provide Solaris and Linux system
+ call emulations.
+
+ * Makefile.in (LIB_{SRC,OBJ}): Add emul_unix.{c,o}.
+ (os_emul.o): Depend on emul_unix.h.
+ (emul_unix.o): New dependency.
+
+ * configure.in (--enable-sim-alignment): Add 0|default to mean set
+ alignment to 0, which means use appropriate alignment for mode.
+ (AC_CHECK_FUNCS): Add new functions needed by emul_unix.c.
+ (AC_CHECK_HEADERS): Add new include files needed by emul_unix.c.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+ * emul_generic.c (emul_write2_status): New function to return
+ results in r3 and r4 for Solaris system calls.
+ (emul_do_system_call): If the system call is not support, but
+ there is a string for the system call name, print out the string
+ instead of the system call number.
+
+ * emul_generic.h (emul_write2_status): Declare it.
+
+ * emul_netbsd.c: Use /* */ around comment on #endif.
+
+ * os_emul.c: Include emul_unix.h.
+ (os_emulations): Add emulations for Solaris, and Linux.
+
+ * psim.c (psim_usage): Add message about solaris, linux
+ emulations.
+
+Thu May 30 00:00:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_iobus.c: Tidy up notes so that they can be auto-extracted.
+
+ * README: Correct PSIM's title
+
+Wed May 29 23:50:26 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * basics.h: New global type object_disposition, used to indicate
+ the status of objects when things are restarted.
+
+Fri May 17 17:28:52 1996 Andrew Cagney <cagney@benjimen.highland.com.au>
+
+ * device_table.h: Change the interrupt descriptor structure so
+ that it includes an additional member - an upper bound on the
+ interrupts by that name.
+
+ * device.c (device_interrupt_decode): Allow a range of interrupt
+ ports (eg rst0 .. rst6) if the port descriptors bound is non zero.
+
+ * device.c (device_tree_print_device): Include a list of valid
+ interrupt ports when listing supported devices.
+
+ * device.h, device.c (device_child_interrupt_*): Delete. Not used.
+
+ * emul_generic.c (emul_add_tree_hardware): Modify the creation of
+ the interrupt net so that it uses int0 .. intN.
+
+Tue May 14 23:03:53 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.h, device.c (device_ioctl): Drop the system argument.
+ Devices can not obtain this using the device_system() call.
+ * device_table.h: Adjust accordingly.
+ * hw_*.c: Adjust accordingly.
+ * emul_netbsd.c (do_break): Adjust call to vm device accordingly.
+ * psim.c (psim_options): Use a device_ioctl call to force the
+ hw_trace device to update the trace options.
+ * hw_trace.c: Replace the init function with an ioctl call. Adjust
+ doc accordingly.
+
+ * psim.c (psim_init): Re-order initialization so that the
+ os-emulation is initialized after the device tree. Without this,
+ os-emul's are not able to create instances or access properties
+ that contain an instance handle.
+
+ * device.h, device.c (device_add_*_property): Make these functions
+ internal to device.c. The user has access to the more generic
+ device_tree_add_parsed function. Differentiate between the initial
+ and current value for each property.
+ * (clean_device_properties): New function that deletes any
+ properties created after the start of a simulation and restores
+ the initial value of any others (ignoring ihandles).
+ * (init_device_properties): (Re)Initialize any properties that
+ contain ihandles. create
+
+ * (device_tree_init): Include calls to clean the device tree's
+ properties and then initialize them. Document this in the device.h
+ file.
+
+Mon May 6 17:36:15 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * interrupts.c (decrementer_interrupt): Always pend a decrementer
+ interrupt even if it is not yet possible to deliver it.
+
+Wed May 1 12:26:51 1996 Andrew Cagney <cagney@benjimen>
+
+ * mon.h, mon.c (mon_get_number_of_insns): Make this externally
+ visable adjusting the arguments so that the interface is correct.
+ (mon_print_info): Adjust calls.
+
+ * registers.h, registers.c (register_description): Add phony
+ cycle, insn and stall registers.
+
+ * psim.c (psim_read_register): Return nr of instructions for given
+ processor.
+
+Tue Apr 30 22:09:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_htab.c: New file. Extract contents from disk_table.c.
+ Contains a device that, during initialization will create a
+ PowerPC htab in memory.
+ * hw_register.c: New file. Extract contents from disk_table.c.
+ Contains a device that, during initialization, will parse its
+ property list and use that to initialize various processor
+ registers (not target specific).
+ * hw_vm.c: New file. Extract contents from disk_table.c. Contains
+ a device that handles accesses to invalid virtual memory addresses
+ (in user mode).
+ * hw_init.c: New file. Extract contents from disk_table.c. Misc
+ devices that can initialize memory from a file.
+ * hw_trace.c: New file. Extract contents from disk_table.c.
+ Configure trace options from property values.
+
+ * Makefile.in (hw_htab.o, hw_register.o, hw_vm.o, hw_init.o,
+ hw_trace.c): Add new device files.
+
+ * device_table.c: Remove above code, now in separate independant
+ files.
+
+Fri Apr 26 00:00:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_disk.c: New file. Disk and CDROM device.
+
+ * Makefile.in (hw_disk.o): Add device hw_disk.c.
+
+ * pk_disklabel.c: New file. Implement the miss-named disk-label
+ package.
+
+ * Makefile.in (pk.h): Create the file pk.h that contains a list of all
+ the packages.
+
+ * Makefile.in (hw.h, hw.c): Add dependancy on Makefile so that
+ they are re-created when the makefile is updated.
+
+ * emul_generic.c (emul_add_tree_hardware): Add a disk device
+ (below the iobus) to the device tree. Include an ihandle of
+ the disk as /chosen/disk.
+
+ * emul_bugapi.c (emul_bugapi_create): Don't initialize the input,
+ output and (new) disk handles yet.
+ * (emul_bugapi_init): Initialize the input, output (and just added)
+ disk ihandles here.
+ * (emul_bugapi_do_diskio): New. Performs disk i/o (well at least
+ what I think the behavour is).
+ * emul_bugapi.c (emul_bugapi_instruction_call): Add hook to disk
+ i/o bug call. For RETURN call, exit using gpr[3]'s status even
+ though this isn't part of the spec - makes it possible for machine
+ code to signal the aporting of a simulation run.
+
+ * emul_chirp.c (chirp_emul_call_method): Add support for the
+ claim/release methods.
+ * (chirp_emul_exit): Add an optional exit status argument to
+ the exit method. Makes it possible for chirp emul simulations
+ to abort upon an error.
+ * device.h, device.c (device_instance_claim,
+ device_instance_release): New methods for claiming and releasing
+ memory.
+ * hw_memory.c: add claim and release memory methods.
+ * hw_*: Use the claim memory method when allocating physical
+ memory.
+
+Thu Apr 18 23:38:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_nvram.c (hw_nvram_update_clock): Use the current not previous
+ time when updating the clock.
+
+ * hw_nvram.c: Tidy up documentation
+
+Fri May 24 10:08:10 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (AC_STRUCT_ST_{BLKSIZE,BLOCKS,RDEV}): Use these
+ macros to determine whether or not the appropriate st_<xxx> fields
+ exist in the stat structure.
+ (AC_CHECK_FUNCS): Check for all unix system calls used, except for
+ the real basic ones like open, read, write, etc.
+ * config{.in,ure}: Regenerate.
+
+ * emul_netbsd.c: Add support for missing system calls, and/or
+ missing stat fields.
+ (MAXPATHLEN): Undefine if including unistd.h, since sys/param.h
+ might define it.
+
+ * hw_pal.c (WITH_STDIO): Redefine if O_NDELAY, F_GETFL, or F_SETFL
+ are not defined.
+ (scan_hw_pal): Do not cause syntax error if O_NDELAY, F_GETFL, or
+ F_SETFL not defined.
+
+Tue May 21 17:24:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * emul_netbsd.c (write_stat): Don't convert st_blocks unless the
+ host is netbsd.
+
+Thu May 16 10:56:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (AC_CHECK_HEADERS): Add sys/ioctl.h.
+ * config{.in,ure}: Regenerate.
+ * emul_netbsd.c: If HAVE_SYS_IOCTL_H is not defined, don't include
+ sys/ioctl.h.
+
+Tue May 7 17:28:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * hw_pal.c (hw_pal_instance_read_callback): Remove unused
+ variable.
+
+ * misc.c ({,target_}a2i): Rewrite to not use strtoul.
+
+ * Makefile.in ({spreg,misc}.o): Add dependency on .c file.
+ ({i,d}gen): Don't link in liberity. Use BUILD_LIBS instead of
+ LIBS.
+
+Mon May 6 11:31:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * hw_pal.c (hw_pal_instance_read_callback): If using stdio, use
+ fgets to read line. If not using stdio, do a simple blocking read
+ of len bytes.
+
+Fri May 3 15:07:42 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in: Correctly build simulator for build machine != host
+ machine.
+
+Tue Apr 30 18:46:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (--enable-hostendian): Rework so the default uses
+ the AC_C_BIGENDIAN results. Only run AC_C_BIGENDIAN if not cross
+ compiling.
+ * configure: Regenerate.
+
+ * sim-endian.h: Add more tests for host endian to support more
+ platforms in a cross compilation environment.
+
+Wed Apr 17 14:38:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * hw_pal.c ({scan,write}_hw_pal): If WITH_STDIO == DO_USE_STDIO,
+ use stdio, instead of unpended read/printf_filtered.
+ (hw_pal_instance_write_callback): If WITH_STDIO == DO_USE_STDIO,
+ flush stdout after writing the characters.
+
+ * options.c (print_options): Print out WITH_STDIO.
+
+ * Makefile.in (STDIO_CFLAGS): Pass on result of @sim_stdio@
+ configuration variable.
+ (CONFIG_CFLAGS): Include STDIO_CFLAGS.
+ (hw.{c,h}): Allow for source dir != build dir, and for HW_SRC
+ files to contain directory pieces.
+
+ * std-config.h (DO{,NT}_USE_STDIO): New flags for whether we
+ should use stdio for console input.
+ (WITH_STDIO): If not defined, define as DONT_USE_STDIO.
+
+ * configure.in (--enable-sim-stdio): Add new switch to control
+ whether stdio is used for console I/O.
+ * configure: Regenerate.
+
+ * interrupts.c (external_interrupt): Declare it to be
+ INLINE_INTERRUPTS, not INLINE_CPU.
+
+Mon Apr 15 23:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * events.c (insert_event_entry): Allow events to be scheduled
+ *NOW* (at delta time 0). Add assertions to clarify behavour of
+ event queue.
+
+ * events.c (update_time_from_event): New function. Calculates the
+ number of ticks from the next event. Use this.
+
+Sun Apr 14 21:39:45 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * emul_netbsd.c (do_break): Return 0 if success (instead of
+ adjusted break).
+
+ * device_table.c (vm_ioctl_callback): Don't return adjusted break
+ (isn't needed).
+
+Sun Apr 14 21:32:41 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device_table.h: Change type of the device ioctl so that it
+ returns an int (status).
+ * device.h (device_ioctl): Ditto.
+ * device.c (device_ioctl): Ditto.
+
+ * device_table.c (stack_ioctl_callback): Return 0 status.
+ (vm_ioctl_callback): Ditto
+
+Sat Apr 13 00:00:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_netbsd.c (do_read): Correctly set the return value.
+ (do_getpid): Ditto.
+ (do_getuid): Ditto.
+ (do_geteuid): Ditto.
+ (do_dup): Ditto.
+ (do_getegid): Ditto.
+ (do_getgid): Ditto.
+ (do_sigprocmask): Ditto.
+ (do_umask): Ditto.
+ (do_dup2): Ditto.
+ (do_gettimeofday): Ditto.
+ (do_getrusage): Ditto.
+ (do_fstat): Ditto.
+ (do_stat): Ditto.
+ (do_lseek): Ditto.
+ (do___sysctl): Ditto.
+
+Fri Apr 12 20:56:47 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device_table.c (vm_ioctl_callback): Don't access the processor
+ registers directly, instead leave it to the caller to handle this.
+
+ * emul_netbsd.c (do_break): Which calls vm_ioctl_callback to
+ perform a break. Pass in the new break value and set the
+ registers according to the result.
+
+ * emul_generic.c (emul_write_status): Change so that r3 contains
+ either status or errno and failure is indicated by SO.
+
+Thu Apr 4 23:03:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_bugapi.c (emul_bugapi_create): More strict check of OEA
+ address.
+
+Thu Apr 4 20:58:05 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * interrupts.h (interrupts): New structure contains state of
+ pending interrupts.
+
+ * cpu.c (cpu_interrupts): New function. Pending interrupt status
+ in the cpu and grant access to it. Add interrupts to cpu
+ structure.
+
+Fri Mar 29 22:09:25 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.c (device_tree_add_parsed): Check that the creation of a
+ device instance worked before using it.
+
+ * psim.c (psim_halt): Remove cia argument from psim_halt. This
+ function does not save the CIA so do not pass it in.
+
+Fri Mar 29 21:30:56 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * hw_pal.c (hw_pal): Merge the halt and icu and console devices
+ found in device_table.c into a single hack pal.
+
+ * device_table.c (halt, icu, console): Delete.
+
+ * Makefile.in (hw_pal.o): New dependency.
+
+ * emul_generic.c (emul_add_tree_hardware): Re-arange device tree
+ so that it uses the pal instead of the icu/halt/console devices.
+ Wire the pal's interrupt ports up to the cpu nodes.
+
+Fri Mar 29 20:17:17 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * hw_iobus.c (hw_iobus_attach_address_callback): Move from
+ device_table.c to here.
+
+ * Makefile.in (hw_iobus.o): New dependency.
+
+Fri Mar 29 12:17:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * emul_bugapi.c (_os_emul_data): Add fields for output, input.
+ (emul_bugapi_create): Create input, output from /chosen/stdin and
+ /chosen/stdout.
+ (emul_bugapi_do_{read,write}): Switch to use device_instance
+ interface.
+ (emul_bugapi_instruction_call): Change calls to
+ emul_bugapi_do_{read,write} to pass device instance argument.
+
+Tue Mar 26 14:57:58 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * igen.c (idecode_switch_end): Fix 2/26 change so that an extra
+ default is not written out if a default was already written.
+
+ * psim.c (psim_{read,write}_register): Use sizeof unsigned_8 to
+ size cooked_buf, not sizeof natural_word, since floating point
+ registers are 8 bytes.
+
+Mon Mar 25 22:07:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * configure: Regenerate with autoconf 2.9.
+
+Thu Mar 21 00:14:26 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device_table.h: Always include string headers.
+
+Thu Mar 21 00:06:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * main.c (error): Be careful to not try to print out statistics
+ when the simulation was never created.
+
+Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * basics.h: Move the event queue's definition to here so that it
+ can be refered to globally with out importing all of events.h.
+
+ * psim.h, psim.c (psim_event_queue): New function. Grant access
+ to the simulation event queue. Will make this the single point of
+ access (there is after all only one event queue in the
+ simulation).
+
+ * cpu.c (cpu_create): Use psim_event_queue to obtain the event
+ queue instead of it being passed in. No longer allow access to
+ the cpu's copy of the event queue.
+
+Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * events.h, events.c (event_handler): Remove event_queue from
+ arguments passed to an event handler. That argument is redundant
+ - the `data' should refer to a data structure that contains the
+ event queue if queing is needed.
+
+ * cpu.c (cpu_decrement_event): adjust
+
+ * events.c (event_queue_process): adjust
+
+Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.h, device.c (device_system): New, returns a handle for
+ the system given the device.
+
+ * device.c (device_address_init): Store a pointer back to the
+ system in each devices node.
+
+ * device_table.h: Don't pass `system' into each device when it is
+ being initialized, this is now available using device_system(me).
+
+ * device.c (device_address_init, device_data_init): Adjust.
+
+ * hw_cpu.c, hw_nvram.c, hw_memory.c, hw_eeprom.c, device_table.c:
+ Adjust.
+
+Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * interrupts.c (decrementer_interrupt, external_interrupt):
+ Remember that an interrupt wasn't delivered so that it can be
+ tried again later.
+
+ * interrupts.c (check_masked_interrupt): New function. (re)
+ checks for the posibility that a recent change to the MSR may have
+ made it possible to deliver an interrupt that was previously
+ masked be the EE bit.
+
+ * ppc-instructions (mtmsr, mfmsr, rfi): Check for posibility of
+ a pending interrupt being delivered using check_masked_interrupt().
+
+ * cpu.c (cpu_decrement_event): Just call decrementer_interrupt()
+ leaving it to that module to handle both interrupt synchronization
+ and masking.
+
+ * cpu.c (struct _cpu): remove variables that were going to record
+ pending decrementer and external interrupts.
+
+Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * hw_cpu.c, hw_cpu.h: New files. Implement a device that sits
+ between the interrupt controller and the simulators internal
+ processor model. Maps device interrupts onto the processor
+ interrupt function calls.
+
+Mon Mar 4 06:06:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * hw_nvram.c: NVRAM device that includes a real-time clock that is
+ updated each second.
+
+Mon Mar 4 04:18:50 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.h (attach_type): Remove attach_default type address
+ spaces. Will replace with levels of callback memory.
+
+ * corefile.h, corefile.c (new_core_mapping), corefile.c
+ (core_map_attach): Replace default attach with a layerd callback
+ approach.
+
+Sun Mar 3 03:58:46 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (split_property_specifier): ensure that only a single
+ property is found.
+ (split_value): New function, parses the value part of a device
+ spec.
+
+ * device.c (device_tree_add_parsed): Use the interrupt conversion
+ functions to determine the interrupt port numbers.
+
+ * device_table.h: Add table that maps between an interrupts
+ symbolic name and its port number.
+
+ * device.h, device.c (device_interrupt_decode,
+ device_interrupt_encode): new functions use the recently added
+ interrupt port name/number tables to perform conversion.
+
+Sun Mar 3 03:23:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.h, device.c (device_set_array_property,
+ device_set_boolean_property, device_set_ihandle_property,
+ device_set_integer_property, device_set_string_property): New
+ functions - allow the value of a given property to be changed.
+
+ * device.h, device.c: Re-order declaration and definition of
+ property functions.
+
+Sun Mar 3 03:10:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
+
+ * device.c (device_tree_print_device, device_tree_add_parsed):
+ Remove references to phandle properties.
+
+Wed Feb 28 00:43:07 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
+
+ * Makefile.in (corefile.o): missing dependency on device_table.h
+ etc.
+
+Tue Feb 27 23:59:35 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
+
+ * device_table.h: Revamp device init callbacks so that they are a
+ sub structure.
+ * device.c (device_init_data, device_init_address): If an init
+ callback is NULL assume it should do nothing.
+ * device_table.c (ignore_device_init, unimp_device_init): delete
+ as redundant.
+ * device_table.c, hw_memory.c: adjust.
+
+ * (io): ditto.
+ * (dma): ditto.
+ * (device_instance): ditto.
+ * (ioctl): ditto.
+ * (address nee config_address): ditto.
+ * (interrupt): ditto.
+
+Mon Feb 26 21:11:20 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
+
+ * igen.c (idecode_switch_end): Output a default entry when the
+ switch statement is perfect. Firstly stops GCC complaining about
+ an incomplete switch and secondly it will be eliminated by a good
+ compiler any way.
+
+Mon Feb 26 22:47:15 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
+
+ * Makefile.in (hw.h, hw.c): New targets. Create from the list of
+ hw_*.c files. hw.h declares a device descriptor table for each hw
+ device while hw.c lists those tables in a form suitable for the
+ construction of a top leveltable in device_table.c.
+
+ * Makefile.in (device_table.o): now depends on hw.c a generated
+ table of hw.
+
+ * device_table.c (device_table): Re-arange the table of devices so
+ that two levels are possible. Make use of hw.c.
+ * device_table.h: ditto.
+
+ * device.c (device_template_create_device): Handle new two level
+ device lookup table.
+ * device.c (device_usage): ditto.
+
+Mon Feb 26 22:24:00 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
+
+ * device_table.c: Delete the memory device (moved to hw_memory.c).
+
+ * hw_memory.c: New file. Just an OpenBoot memory device.
+
+Wed Jan 17 21:47:34 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.c (device_init_address): New. Split initialization into
+ two stages, address and address spaces
+ * device.c (device_init_data): New. ... and data or other work.
+ With out this, devices try to modify memory before it as been
+ attached.
+
+ * device.c (device_tree_init): Update to perform staged
+ initialization.
+
+ * device.c (device_init): Delete.
+
+Wed Jan 17 21:43:09 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device_table.c (data_*): Rewrite to make heaver use of property
+ nodes. Allow initialization by different data types.
+ * device_table.c (htab_* pte_*): Rewrite to use properties.
+
+ * emul_chirp.c (emul_chirp_create): Use
+ * emul_bugapi.c (emul_bugapi_create): Ditto
+ * emul_netbsd.c (emul_netbsd_create): Ditto
+
+Wed Jan 17 21:24:50 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * emul_generic.c (emul_add_tree_options): Annotate existing tree
+ with options that haven't yet been specified.
+ * emul_generic.c (emul_add_tree_hardware): Annotate existing tree
+ with demo devices and properties.
+
+ * emul_chirp.c (emul_chirp_create): Update to use new
+ device_tree_add_parsed call and additional information now
+ included in the device tree. Use emul_add_tree* functions to add
+ any missing details.
+ * emul_bugapi.c (emul_bugapi_create): Ditto
+ * emul_netbsd.c (emul_netbsd_create): Ditto
+
+Wed Jan 17 21:18:27 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.c (device_instance_create): New. Create/delete and
+ operate on instances of a device.
+ * device.c (device_instance_delete): Ditto
+ * device.c (device_instance_read): Ditto
+ * device.c (device_instance_write): Ditto
+ * device.c (device_instance_seek): Ditto
+ * device.c (device_instance_data): Ditto
+ * device.c (device_instance_name): Ditto
+ * device.c (device_instance_path): Ditto
+
+ * emul_chirp.c (chirp_emul_open): Implement using device_instance.
+ * emul_chirp.c (chirp_emul_close): Ditto
+ * emul_chirp.c (chirp_emul_read): Ditto
+ * emul_chirp.c (chirp_emul_write): Ditto
+ * emul_chirp.c (chirp_emul_seek): Ditto
+
+ * emul_chirp.c (chirp_read_t2h_args): Read arguments from device.
+ Being careful to convert all from target to host byte order.
+ * emul_chirp.c (chirp_write_h2t_args): Converse.
+
+Wed Jan 17 20:07:15 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.c (device_tree_add_parsed): New. Rewrite code to add
+ devices to the device tree so that a single printf style function
+ is used.
+
+ * device.c (device_tree_add_*): Delete. Replaced by above.
+
+ * device.c (split_device_specifier): Functions to manipulate a
+ device specifier (path) breaking it into its components
+ * device.c (split_property_specifier): Ditto
+ * device.c (split_device_name): Ditto
+ * device.c (split_find_device): Ditto
+
+ * device.c (scan_*): Delete
+
+ * device.c (device_tree_find_device): Rewrite to use above.
+ * device.c (device_add_property): Ditto
+
+Wed Jan 17 19:51:56 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * psim.c(psim_options): Parse the psim options, installing their
+ value in the device tree. Options are now first entered into a
+ device tree and then extracted out again when needed. This allows
+ greater flexability in configuration.
+
+ * psim.c (psim_tree): Returns a basic device tree ready for
+ parsing by psim_options.
+ * psim.c (psim_usage): New. Give usage to varing levels of detail
+ according to the verbosity. In turn output device and trace
+ usage.
+
+ * main.c (main): Update to use new system
+ * sim_calls.c (sim_open, sim_do_command): Ditto
+
+ * psim.c (psim_options): Add `r' option - ram size.
+ * psim.c (psim_options): Add `o' option - openboot tree entry.
+ * psim.c (psim_options): Add `h'/`H' options - more help.
+
+ * debug.c (trace_usage): Add more detailed help.
+ * device.c (device_usage): New. Output help including a list of
+ the devices currently available in the device table.
+ * device_table.c: Add usage operator to each device.
+
+ * corefile.c (core_create, core_device_create): Adjust so that the
+ core device is created earlier for psim_tree(). Core can later be
+ created from it.
+
+ * psim.c (psim_create): Update to handle above way of creating
+ things. Extract all information from the device tree.
+
+ * device_tree.c (trace_*): New device node, its properties are
+ used to set the value of the trace options. Init this device (in
+ psim_options) when ever the options are updated.
+
+Wed Jan 17 19:46:07 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * debug.h: Add trace_print_info, trace_print_device_tree and
+ trace_dump_device_tree. The first is a replacement for the
+ variable `print_info' found in main.c and sim_calls.c. The latter
+ two enable the dumping of the entire device tree.
+
+ * debug.c: Add to trace_description table.
+
+ * main.c (main): Use above trace instead of local variable
+ * sim_calls.c (sim_close): Ditto
+
+ * device.c (device_tree_print_device): New. Prints the device
+ tree in a format that is consistent with what can be parsed by the
+ device tree load from file code.
+
+ * psim.c (psim_create): Dump device tree if enabled. If nump
+ selected, exit psim immediatly.
+
+Wed Jan 17 19:36:52 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * corefile-n.h (core_map_read_N): When mapping from an address to
+ a device, do not subtract the devices base. The device its self
+ can do this. Brings the behavour into line with OpenBoot.
+ * corefile-n.h (core_map_write_N): Ditto
+ * corefile.c (core_map_read_buffer): Ditto
+ * corefile.c (core_map_write_buffer): Ditto
+
+ * device_table.c (console_io_read_buffer_callback): Adjust to
+ handle biased address.
+ * device_table.c (console_io_write_buffer_callback): Ditto
+
+Wed Jan 17 18:36:09 1996 Andrew Cagney <cagney@highland.com.au>
+
+ * device.c (attach_device_interrupt_edge): New. Interrupt model
+ did not allow interrupts to be wired up as a general net (edges).
+ Re-implement so that interrupt events can be passed to multiple
+ controllers and interrupt controllers can further propogate
+ interrupt events.
+
+ * device.c (attach_device_interrupt_edge) : New, Ditto
+ * device.c (detach_device_interrupt_edge) : New, Ditto
+ * device.c (clean_device_interrupt_edges) : New, Ditto
+ * device.c (device_interrupt_event) : New, Ditto
+ * device.c (device_interrupt_attach) : New, Ditto
+ * device.c (device_interrupt_detach) : New, Ditto
+ * device.c (device_child_interrupt_attach) : New, Ditto
+ * device.c (device_child_interrupt_detach) : New, Ditto
+
+ * device.c (device_attach_interrupt) : Delete old
+ * device.c (device_detach_interrupt) : Delete old
+ * device.c (device_interrupt) : Delete old
+ * device.c (device_interrupt_ack) : Delete old
+
+ * device_table.c (unimp_*) : Update to match
+
+ * device_table.c (icu_io_write_buffer_callback) : Update to use
+ interface.
+ * device_table.c (icu_interrupt_event_callback) : Ditto
- * configure.in: Clone from other simulator targets.
- * configure: Generate via autoconf from configure.in.
+Wed Jan 17 18:18:40 1996 Andrew Cagney <cagney@highland.com.au>
-Sat Aug 19 09:05:32 1995 Andrew Cagney <cagney@highland.com.au>
+ * device.c (external_to_device) : New function that provides a
+ standard mapping between a devices internal representation (a
+ pointer) and its external (or what is passed to a client)
+ representation (a phandle). Implement using the cap object
+ attached to the root node.
- * ppc-instructions: fix srawi (was geting XER[CA] real wrong).
+ * device.c (device_to_external) : Ditto
+ * device.c (external_to_device_instance) : Ditto but for ihandle
+ and device instance.
+ * device.c (device_instance_to_external) : Ditto
- * interrupts.c (data_storage_interrupt): allow stack to grow by
- upto one MB per increment.
+ * Makefile (device.o): Add dependency on cap.
- * ppc-instructions: divw was computing rA / rA not rA / rB
+ * emul_chirp.c (struct _emul_chirp_data) : Elimate use of cap. Code
+ needing to translate between internal and external representations
+ changed to use the external_to_device et.al. device operations.
+ * emul_chirp.c (chirp_emul_*) : Ditto
- * main.c (main): really stupid. Wasn't exiting with correct status
+ * Makefile (emul_chirp.o): Remove dependency on cap
-Fri Aug 18 00:38:01 1995 Andrew Cagney <cagney@highland.com.au>
+Sat Jan 6 10:13:26 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
- * system.c (system_call): add system calls kill(2) and getpid(2).
+ * emul_chirp.c (map_over_chirp_note): Tighten up (and fix) checks
+ on OpenBoot note section.
- * main.c (main): Check/return exit status when simulation
- finishes.
+Fri Jan 5 20:28:53 1996 Andrew Cagney <cagney@hignland.com.au>
-Thu Aug 17 14:29:18 1995 Andrew Cagney <cagney@highland.com.au>
+ * emul_generic.c (emul_write_buffer): Use vm faulting byte
+ read/write calls for buffer transfers. This will cause a fault to
+ occure if the transfer fails. CHRP catches the fault while the
+ others suffer the consequences.
+ (emul_read_buffer): Ditto.
+ (emul_write_word): Ditto.
+ (emul_read_word): Ditto.
+ (emul_read_string): Ditto.
- * device_tree.c (create_option_device_node): Alignment rules (at
- least for the moment) now are for strict alignment only for LE OEA
- mode. (Because of compiler problems).
+Fri Jan 5 18:55:34 1996 Andrew Cagney <cagney@highland.com.au>
- * system.c (system_call) SYS_exit: Wasn't exiting with correct status.
+ * emul_chirp.c (emul_chirp_create, emul_chirp_instruction_call),
+ emul_generic (emul_blr_instruction): Use a real blr instruction to
+ return from a client service call.
-Thu Aug 17 01:16:38 1995 Andrew Cagney <cagney@highland.com.au>
+ * emul_chirp.c (services): Add all OpenBoot services to table.
- * vm.c (DEFINE_VM_DATA_MAP_WRITE_N): For miss aligned transfer
- forgot to return.
+ * emul_generic.h, emul_bugapi.c (emul_bugapi_create), emul_chirp.c
+ (emul_chirp_create) : Use names instead of numbers for
+ instructions being stored in memory.
- * system.c (system_call): didn't page align break argument before
- determining increment break increment.
+Fri Jan 5 18:52:28 1996 Andrew Cagney <cagney@highland.com.au>
- * psim/ppc: Re-arange entire directory structure so that
- everything lives in the one directory. While a pain for cleaning,
- makes building across multiple architectures much simpler.
+ * Makefile.in (maintainer-clean): Remove .log, core and *.core
+ (From NetBSD) files.
- * devices.c, device_tree.c: Added code that provides a simple
- illustration of how an interrupt control device could be
- implemented.
+Wed May 29 22:57:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
- * devices.c: Added code so that the dumb console device can read
- (from stdin) as well as write to stdout.
+ * ChangeLog.00, ChangeLog: ChangeLog from gdb-4.16 becomes
+ ChangeLog.00