* aclocal.m4 (SIM_AC_OPTION_HARDWARE): Set sim_hw_obj, sim_dv_obj,

[binutils-gdb.git] / sim / txvu / configure

diff --git a/sim/txvu/configure b/sim/txvu/configure
index 1ea2d9552b68c84d5880dfd645449294a81feec1..d4b1a7746ed03a3e9aea2637525f07cf2f356de5 100755 (executable)
--- a/sim/txvu/configure
+++ b/sim/txvu/configure
@@ -71,6 +71,9 @@
 
 
 
+
+
+
 
 
 
@@ -86,6 +89,8 @@
 ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
+ac_help="$ac_help
+  --enable-maintainer-mode             Enable developer functionality."
 ac_help="$ac_help
   --enable-sim-bswap                   Use Host specific BSWAP instruction."
 ac_help="$ac_help
@@ -109,7 +114,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --enable-sim-endian=endian           Specify target byte endian orientation."
 ac_help="$ac_help
-  --enable-sim-bitsize=n               Specify target bitsize (32 or 64)."
+  --enable-sim-bitsize=N               Specify target bitsize (32 or 64)."
 ac_help="$ac_help
   --enable-sim-float                   Specify that the target processor has floating point hardware."
 ac_help="$ac_help
@@ -623,7 +628,7 @@ fi
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:627: checking how to run the C preprocessor" >&5
+echo "configure:632: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -638,13 +643,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 642 "configure"
+#line 647 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:653: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -655,13 +660,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 659 "configure"
+#line 664 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:665: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:670: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -734,7 +739,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:738: checking host system type" >&5
+echo "configure:743: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -755,7 +760,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:759: checking target system type" >&5
+echo "configure:764: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -773,7 +778,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:777: checking build system type" >&5
+echo "configure:782: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -817,7 +822,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:821: checking for $ac_word" >&5
+echo "configure:826: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -846,7 +851,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:850: checking for $ac_word" >&5
+echo "configure:855: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -894,7 +899,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:898: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:903: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -904,11 +909,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 908 "configure"
+#line 913 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -928,12 +933,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:932: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:937: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:937: checking whether we are using GNU C" >&5
+echo "configure:942: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -942,7 +947,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -957,7 +962,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:961: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:966: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -995,7 +1000,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:999: checking for a BSD compatible install" >&5
+echo "configure:1004: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1060,7 +1065,7 @@ AR=${AR-ar}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1064: checking for $ac_word" >&5
+echo "configure:1069: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1090,21 +1095,101 @@ fi
 # Check for common headers.
 # FIXME: Seems to me this can cause problems for i386-windows hosts.
 # At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1098: checking for $ac_hdr" >&5
+echo "configure:1103: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1103 "configure"
+#line 1108 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1108: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1113: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1143: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1148 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1153: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1183: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1188 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1193: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1133,12 +1218,12 @@ done
 for ac_func in getrusage time sigaction
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1137: checking for $ac_func" >&5
+echo "configure:1222: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1142 "configure"
+#line 1227 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1161,7 +1246,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1190,6 +1275,24 @@ done
 
 
 
+USE_MAINTAINER_MODE=no
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  case "${enableval}" in
+  yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
+  no)  MAINT="#" ;;
+  *)   { echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;;
+esac
+if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
+  echo "Setting maintainer mode" 6>&1
+fi
+else
+  MAINT="#"
+fi
+
+
+
 # Check whether --enable-sim-bswap or --disable-sim-bswap was given.
 if test "${enable_sim_bswap+set}" = set; then
   enableval="$enable_sim_bswap"
@@ -1316,12 +1419,12 @@ fi
 
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1320: checking return type of signal handlers" >&5
+echo "configure:1423: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1325 "configure"
+#line 1428 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -1338,7 +1441,7 @@ int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1445: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -1482,14 +1585,14 @@ else
   
 if test "x$cross_compiling" = "xno"; then
   echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1486: checking whether byte ordering is bigendian" >&5
+echo "configure:1589: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 1493 "configure"
+#line 1596 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1500,11 +1603,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1504: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 1508 "configure"
+#line 1611 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1515,7 +1618,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1519: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1622: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -1535,7 +1638,7 @@ if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1539 "configure"
+#line 1642 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -1548,7 +1651,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:1552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -1713,38 +1816,63 @@ case "${target}" in
   mips*-*-*)            mips_bitsize=32 ; mips_msb=31 ;;
   *)                    mips_bitsize=64 ; mips_msb=63 ;;
 esac
-wire_bitsize="$mips_bitsize"
-wire_msb="$mips_msb"
+wire_word_bitsize="$mips_bitsize"
+wire_word_msb="$mips_msb"
+wire_address_bitsize=""
+wire_cell_bitsize=""
 # Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
 if test "${enable_sim_bitsize+set}" = set; then
   enableval="$enable_sim_bitsize"
-  case "${enableval}" in
-  64,63) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
-  32,31) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
-  64,0) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
-  32,0) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
-  32) if test x"$wire_msb" != x -a x"$wire_msb" != x0; then
+  sim_bitsize=
+case "${enableval}" in
+  64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
+  32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
+  64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+  32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+  32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
       else
         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
       fi ;;
-  64) if test x"$wire_msb" != x -a x"$wire_msb" != x0; then
+  64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
       else
         sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
       fi ;;
-  *)  { echo "configure: error: "--enable-sim-bitsize was given $enableval.  Expected 32 or 64"" 1>&2; exit 1; }; sim_bitsize="";;
+  *)  { echo "configure: error: "--enable-sim-bitsize was given $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
+esac
+# address bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9]*,*//"`
+case x"${tmp}" in
+  x ) ;;
+  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
+  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
+  * ) { echo "configure: error: "--enable-sim-bitsize was given address size $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
+esac
+# cell bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9*]*,*[0-9]*,*//"`
+case x"${tmp}" in
+  x ) ;;
+  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
+  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
+  * ) { echo "configure: error: "--enable-sim-bitsize was given cell size $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
 esac
 if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
   echo "Setting bitsize flags = $sim_bitsize" 6>&1
 fi
 else
   sim_bitsize=""
-if test x"$wire_bitsize" != x; then
-  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_bitsize"
+if test x"$wire_word_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
+fi
+if test x"$wire_word_msb" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
 fi
-if test x"$wire_msb" != x; then
-  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_msb"
+if test x"$wire_address_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
+fi
+if test x"$wire_cell_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
 fi
 fi
 
@@ -1770,20 +1898,31 @@ case "${target}" in
   *)                    mips_fpu=HARD_FLOATING_POINT ;;
 esac
 
-default_sim_floating_point="$mips_fpu"
+default_sim_float="$mips_fpu"
+default_sim_float_bitsize=""
 # Check whether --enable-sim-float or --disable-sim-float was given.
 if test "${enable_sim_float+set}" = set; then
   enableval="$enable_sim_float"
   case "${enableval}" in
   yes | hard)  sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
   no | soft)   sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+  32)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
+  64)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
   *)           { echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
   echo "Setting float flags = $sim_float" 6>&1
 fi
 else
-  sim_float="-DWITH_FLOATING_POINT=${default_sim_floating_point}"
+  
+sim_float=
+if test x"${default_sim_float}" != x""; then
+  sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
+fi
+if test x"${default_sim_float_bitsize}" != x""; then
+  sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
+fi
+
 fi
 
 
@@ -1868,17 +2007,17 @@ for ac_hdr in string.h strings.h stdlib.h stdlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1872: checking for $ac_hdr" >&5
+echo "configure:2011: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1877 "configure"
+#line 2016 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1905,7 +2044,7 @@ fi
 done
 
 echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:1909: checking for fabs in -lm" >&5
+echo "configure:2048: checking for fabs in -lm" >&5
 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1913,7 +2052,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1917 "configure"
+#line 2056 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1924,7 +2063,7 @@ int main() {
 fabs()
 ; return 0; }
 EOF
-if { (eval echo configure:1928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1954,12 +2093,12 @@ fi
 for ac_func in aint anint sqrt
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1958: checking for $ac_func" >&5
+echo "configure:2097: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1963 "configure"
+#line 2102 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1982,7 +2121,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2129,6 +2268,9 @@ s%@sim_float@%$sim_float%g
 s%@sim_scache@%$sim_scache%g
 s%@sim_default_model@%$sim_default_model%g
 s%@sim_hardware@%$sim_hardware%g
+s%@sim_hw_obj@%$sim_hw_obj%g
+s%@sim_dv_src@%$sim_dv_src%g
+s%@sim_dv_obj@%$sim_dv_obj%g
 s%@sim_inline@%$sim_inline%g
 s%@sim_packages@%$sim_packages%g
 s%@sim_regparm@%$sim_regparm%g
@@ -2181,6 +2323,7 @@ s%@HDEFINES@%$HDEFINES%g
 s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
 s%@CPP@%$CPP%g
+s%@MAINT@%$MAINT%g
 s%@sim_bswap@%$sim_bswap%g
 s%@sim_cflags@%$sim_cflags%g
 s%@sim_debug@%$sim_debug%g