/*
+ * Copyright (c) 2007 The Hewlett-Packard Development Company
+ * All rights reserved.
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
* Copyright (c) 2003-2006 The Regents of The University of Michigan
* All rights reserved.
*
* Ali Saidi
*/
-/*
- * Copyright (c) 2007 The Hewlett-Packard Development Company
- * All rights reserved.
- *
- * Redistribution and use of this software in source and binary forms,
- * with or without modification, are permitted provided that the
- * following conditions are met:
- *
- * The software must be used only for Non-Commercial Use which means any
- * use which is NOT directed to receiving any direct monetary
- * compensation for, or commercial advantage from such use. Illustrative
- * examples of non-commercial use are academic research, personal study,
- * teaching, education and corporate research & development.
- * Illustrative examples of commercial use are distributing products for
- * commercial advantage and providing services using the software for
- * commercial advantage.
- *
- * If you wish to use this software or functionality therein that may be
- * covered by patents for commercial use, please contact:
- * Director of Intellectual Property Licensing
- * Office of Strategy and Technology
- * Hewlett-Packard Company
- * 1501 Page Mill Road
- * Palo Alto, California 94304
- *
- * Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer. Redistributions
- * in binary form must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or
- * other materials provided with the distribution. Neither the name of
- * the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission. No right of
- * sublicense is granted herewith. Derivatives of the software and
- * output created using the software may be prepared, but only for
- * Non-Commercial Uses. Derivatives of the software may be shared with
- * others provided: (i) the others agree to abide by the list of
- * conditions herein which includes the Non-Commercial Use restrictions;
- * and (ii) such Derivatives of the software include the above copyright
- * notice to acknowledge the contribution from this software where
- * applicable, this list of conditions and the disclaimer below.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Authors: Gabe Black
- */
-
+#include "arch/x86/regs/misc.hh"
+#include "arch/x86/regs/segment.hh"
#include "arch/x86/isa_traits.hh"
#include "arch/x86/process.hh"
#include "arch/x86/types.hh"
-#include "base/loader/object_file.hh"
#include "base/loader/elf_object.hh"
+#include "base/loader/object_file.hh"
#include "base/misc.hh"
+#include "base/trace.hh"
#include "cpu/thread_context.hh"
#include "mem/page_table.hh"
#include "mem/translating_port.hh"
#include "sim/process_impl.hh"
+#include "sim/syscall_emul.hh"
#include "sim/system.hh"
using namespace std;
using namespace X86ISA;
-M5_64_auxv_t::M5_64_auxv_t(int64_t type, int64_t val)
+static const int ArgumentReg[] = {
+ INTREG_RDI,
+ INTREG_RSI,
+ INTREG_RDX,
+ //This argument register is r10 for syscalls and rcx for C.
+ INTREG_R10W,
+ //INTREG_RCX,
+ INTREG_R8W,
+ INTREG_R9W
+};
+static const int NumArgumentRegs = sizeof(ArgumentReg) / sizeof(const int);
+static const int ArgumentReg32[] = {
+ INTREG_EBX,
+ INTREG_ECX,
+ INTREG_EDX,
+ INTREG_ESI,
+ INTREG_EDI,
+};
+static const int NumArgumentRegs32 = sizeof(ArgumentReg) / sizeof(const int);
+
+X86LiveProcess::X86LiveProcess(LiveProcessParams * params, ObjectFile *objFile,
+ SyscallDesc *_syscallDescs, int _numSyscallDescs) :
+ LiveProcess(params, objFile), syscallDescs(_syscallDescs),
+ numSyscallDescs(_numSyscallDescs)
{
- a_type = TheISA::htog(type);
- a_val = TheISA::htog(val);
+ brk_point = objFile->dataBase() + objFile->dataSize() + objFile->bssSize();
+ brk_point = roundUp(brk_point, VMPageSize);
}
-X86LiveProcess::X86LiveProcess(const std::string &nm, ObjectFile *objFile,
- System *_system, int stdin_fd, int stdout_fd, int stderr_fd,
- std::vector<std::string> &argv, std::vector<std::string> &envp,
- const std::string &cwd,
- uint64_t _uid, uint64_t _euid, uint64_t _gid, uint64_t _egid,
- uint64_t _pid, uint64_t _ppid)
- : LiveProcess(nm, objFile, _system, stdin_fd, stdout_fd, stderr_fd,
- argv, envp, cwd, _uid, _euid, _gid, _egid, _pid, _ppid)
+X86_64LiveProcess::X86_64LiveProcess(LiveProcessParams *params,
+ ObjectFile *objFile, SyscallDesc *_syscallDescs,
+ int _numSyscallDescs) :
+ X86LiveProcess(params, objFile, _syscallDescs, _numSyscallDescs)
{
- brk_point = objFile->dataBase() + objFile->dataSize() + objFile->bssSize();
- brk_point = roundUp(brk_point, VMPageSize);
+
+ vsyscallPage.base = 0xffffffffff600000ULL;
+ vsyscallPage.size = VMPageSize;
+ vsyscallPage.vtimeOffset = 0x400;
+ vsyscallPage.vgettimeofdayOffset = 0x410;
+
+ // Set up stack. On X86_64 Linux, stack goes from the top of memory
+ // downward, less the hole for the kernel address space plus one page
+ // for undertermined purposes.
+ stack_base = (Addr)0x7FFFFFFFF000ULL;
// Set pointer for next thread stack. Reserve 8M for main stack.
next_thread_stack_base = stack_base - (8 * 1024 * 1024);
- // Set up stack. On SPARC Linux, stack goes from the top of memory
- // downward, less the hole for the kernel address space.
- stack_base = (Addr)0x80000000000ULL;
+ // Set up region for mmaps. This was determined empirically and may not
+ // always be correct.
+ mmap_start = mmap_end = (Addr)0x2aaaaaaab000ULL;
+}
- // Set up region for mmaps. Tru64 seems to start just above 0 and
- // grow up from there.
- mmap_start = mmap_end = 0xfffff80000000000ULL;
+void
+I386LiveProcess::syscall(int64_t callnum, ThreadContext *tc)
+{
+ TheISA::PCState pc = tc->pcState();
+ Addr eip = pc.pc();
+ if (eip >= vsyscallPage.base &&
+ eip < vsyscallPage.base + vsyscallPage.size) {
+ pc.npc(vsyscallPage.base + vsyscallPage.vsysexitOffset);
+ tc->pcState(pc);
+ }
+ X86LiveProcess::syscall(callnum, tc);
}
-void X86LiveProcess::handleTrap(int trapNum, ThreadContext *tc)
+
+I386LiveProcess::I386LiveProcess(LiveProcessParams *params,
+ ObjectFile *objFile, SyscallDesc *_syscallDescs,
+ int _numSyscallDescs) :
+ X86LiveProcess(params, objFile, _syscallDescs, _numSyscallDescs)
{
- switch(trapNum)
- {
- default:
- panic("Unimplemented trap to operating system: trap number %#x.\n", trapNum);
+ _gdtStart = ULL(0x100000000);
+ _gdtSize = VMPageSize;
+
+ vsyscallPage.base = 0xffffe000ULL;
+ vsyscallPage.size = VMPageSize;
+ vsyscallPage.vsyscallOffset = 0x400;
+ vsyscallPage.vsysexitOffset = 0x410;
+
+ stack_base = vsyscallPage.base;
+
+ // Set pointer for next thread stack. Reserve 8M for main stack.
+ next_thread_stack_base = stack_base - (8 * 1024 * 1024);
+
+ // Set up region for mmaps. This was determined empirically and may not
+ // always be correct.
+ mmap_start = mmap_end = (Addr)0xf7ffe000ULL;
+}
+
+SyscallDesc*
+X86LiveProcess::getDesc(int callnum)
+{
+ if (callnum < 0 || callnum >= numSyscallDescs)
+ return NULL;
+ return &syscallDescs[callnum];
+}
+
+void
+X86_64LiveProcess::initState()
+{
+ X86LiveProcess::initState();
+
+ argsInit(sizeof(uint64_t), VMPageSize);
+
+ // Set up the vsyscall page for this process.
+ pTable->allocate(vsyscallPage.base, vsyscallPage.size);
+ uint8_t vtimeBlob[] = {
+ 0x48,0xc7,0xc0,0xc9,0x00,0x00,0x00, // mov $0xc9,%rax
+ 0x0f,0x05, // syscall
+ 0xc3 // retq
+ };
+ initVirtMem->writeBlob(vsyscallPage.base + vsyscallPage.vtimeOffset,
+ vtimeBlob, sizeof(vtimeBlob));
+
+ uint8_t vgettimeofdayBlob[] = {
+ 0x48,0xc7,0xc0,0x60,0x00,0x00,0x00, // mov $0x60,%rax
+ 0x0f,0x05, // syscall
+ 0xc3 // retq
+ };
+ initVirtMem->writeBlob(vsyscallPage.base + vsyscallPage.vgettimeofdayOffset,
+ vgettimeofdayBlob, sizeof(vgettimeofdayBlob));
+
+ for (int i = 0; i < contextIds.size(); i++) {
+ ThreadContext * tc = system->getThreadContext(contextIds[i]);
+
+ SegAttr dataAttr = 0;
+ dataAttr.dpl = 3;
+ dataAttr.unusable = 0;
+ dataAttr.defaultSize = 1;
+ dataAttr.longMode = 1;
+ dataAttr.avl = 0;
+ dataAttr.granularity = 1;
+ dataAttr.present = 1;
+ dataAttr.type = 3;
+ dataAttr.writable = 1;
+ dataAttr.readable = 1;
+ dataAttr.expandDown = 0;
+ dataAttr.system = 1;
+
+ //Initialize the segment registers.
+ for(int seg = 0; seg < NUM_SEGMENTREGS; seg++) {
+ tc->setMiscRegNoEffect(MISCREG_SEG_BASE(seg), 0);
+ tc->setMiscRegNoEffect(MISCREG_SEG_EFF_BASE(seg), 0);
+ tc->setMiscRegNoEffect(MISCREG_SEG_ATTR(seg), dataAttr);
+ }
+
+ SegAttr csAttr = 0;
+ csAttr.dpl = 3;
+ csAttr.unusable = 0;
+ csAttr.defaultSize = 0;
+ csAttr.longMode = 1;
+ csAttr.avl = 0;
+ csAttr.granularity = 1;
+ csAttr.present = 1;
+ csAttr.type = 10;
+ csAttr.writable = 0;
+ csAttr.readable = 1;
+ csAttr.expandDown = 0;
+ csAttr.system = 1;
+
+ tc->setMiscRegNoEffect(MISCREG_CS_ATTR, csAttr);
+
+ Efer efer = 0;
+ efer.sce = 1; // Enable system call extensions.
+ efer.lme = 1; // Enable long mode.
+ efer.lma = 1; // Activate long mode.
+ efer.nxe = 1; // Enable nx support.
+ efer.svme = 0; // Disable svm support for now. It isn't implemented.
+ efer.ffxsr = 1; // Turn on fast fxsave and fxrstor.
+ tc->setMiscReg(MISCREG_EFER, efer);
+
+ //Set up the registers that describe the operating mode.
+ CR0 cr0 = 0;
+ cr0.pg = 1; // Turn on paging.
+ cr0.cd = 0; // Don't disable caching.
+ cr0.nw = 0; // This is bit is defined to be ignored.
+ cr0.am = 0; // No alignment checking
+ cr0.wp = 0; // Supervisor mode can write read only pages
+ cr0.ne = 1;
+ cr0.et = 1; // This should always be 1
+ cr0.ts = 0; // We don't do task switching, so causing fp exceptions
+ // would be pointless.
+ cr0.em = 0; // Allow x87 instructions to execute natively.
+ cr0.mp = 1; // This doesn't really matter, but the manual suggests
+ // setting it to one.
+ cr0.pe = 1; // We're definitely in protected mode.
+ tc->setMiscReg(MISCREG_CR0, cr0);
+
+ tc->setMiscReg(MISCREG_MXCSR, 0x1f80);
}
}
void
-X86LiveProcess::startup()
+I386LiveProcess::initState()
{
- argsInit(sizeof(IntReg), VMPageSize);
-
- //The AMD64 abi says that only rsp and rdx are defined at process
- //startup. rsp will be set by argsInit, and I don't understand what
- //rdx should be set to. The other floating point and integer registers
- //will be zeroed by the register file constructors, but control registers
- //should be initialized here. Since none of those are implemented, there
- //isn't anything here.
+ X86LiveProcess::initState();
+
+ argsInit(sizeof(uint32_t), VMPageSize);
+
+ /*
+ * Set up a GDT for this process. The whole GDT wouldn't really be for
+ * this process, but the only parts we care about are.
+ */
+ pTable->allocate(_gdtStart, _gdtSize);
+ uint64_t zero = 0;
+ assert(_gdtSize % sizeof(zero) == 0);
+ for (Addr gdtCurrent = _gdtStart;
+ gdtCurrent < _gdtStart + _gdtSize; gdtCurrent += sizeof(zero)) {
+ initVirtMem->write(gdtCurrent, zero);
+ }
+
+ // Set up the vsyscall page for this process.
+ pTable->allocate(vsyscallPage.base, vsyscallPage.size);
+ uint8_t vsyscallBlob[] = {
+ 0x51, // push %ecx
+ 0x52, // push %edp
+ 0x55, // push %ebp
+ 0x89, 0xe5, // mov %esp, %ebp
+ 0x0f, 0x34 // sysenter
+ };
+ initVirtMem->writeBlob(vsyscallPage.base + vsyscallPage.vsyscallOffset,
+ vsyscallBlob, sizeof(vsyscallBlob));
+
+ uint8_t vsysexitBlob[] = {
+ 0x5d, // pop %ebp
+ 0x5a, // pop %edx
+ 0x59, // pop %ecx
+ 0xc3 // ret
+ };
+ initVirtMem->writeBlob(vsyscallPage.base + vsyscallPage.vsysexitOffset,
+ vsysexitBlob, sizeof(vsysexitBlob));
+
+ for (int i = 0; i < contextIds.size(); i++) {
+ ThreadContext * tc = system->getThreadContext(contextIds[i]);
+
+ SegAttr dataAttr = 0;
+ dataAttr.dpl = 3;
+ dataAttr.unusable = 0;
+ dataAttr.defaultSize = 1;
+ dataAttr.longMode = 0;
+ dataAttr.avl = 0;
+ dataAttr.granularity = 1;
+ dataAttr.present = 1;
+ dataAttr.type = 3;
+ dataAttr.writable = 1;
+ dataAttr.readable = 1;
+ dataAttr.expandDown = 0;
+ dataAttr.system = 1;
+
+ //Initialize the segment registers.
+ for(int seg = 0; seg < NUM_SEGMENTREGS; seg++) {
+ tc->setMiscRegNoEffect(MISCREG_SEG_BASE(seg), 0);
+ tc->setMiscRegNoEffect(MISCREG_SEG_EFF_BASE(seg), 0);
+ tc->setMiscRegNoEffect(MISCREG_SEG_ATTR(seg), dataAttr);
+ tc->setMiscRegNoEffect(MISCREG_SEG_SEL(seg), 0xB);
+ tc->setMiscRegNoEffect(MISCREG_SEG_LIMIT(seg), (uint32_t)(-1));
+ }
+
+ SegAttr csAttr = 0;
+ csAttr.dpl = 3;
+ csAttr.unusable = 0;
+ csAttr.defaultSize = 1;
+ csAttr.longMode = 0;
+ csAttr.avl = 0;
+ csAttr.granularity = 1;
+ csAttr.present = 1;
+ csAttr.type = 0xa;
+ csAttr.writable = 0;
+ csAttr.readable = 1;
+ csAttr.expandDown = 0;
+ csAttr.system = 1;
+
+ tc->setMiscRegNoEffect(MISCREG_CS_ATTR, csAttr);
+
+ tc->setMiscRegNoEffect(MISCREG_TSG_BASE, _gdtStart);
+ tc->setMiscRegNoEffect(MISCREG_TSG_EFF_BASE, _gdtStart);
+ tc->setMiscRegNoEffect(MISCREG_TSG_LIMIT, _gdtStart + _gdtSize - 1);
+
+ // Set the LDT selector to 0 to deactivate it.
+ tc->setMiscRegNoEffect(MISCREG_TSL, 0);
+
+ Efer efer = 0;
+ efer.sce = 1; // Enable system call extensions.
+ efer.lme = 1; // Enable long mode.
+ efer.lma = 0; // Deactivate long mode.
+ efer.nxe = 1; // Enable nx support.
+ efer.svme = 0; // Disable svm support for now. It isn't implemented.
+ efer.ffxsr = 1; // Turn on fast fxsave and fxrstor.
+ tc->setMiscReg(MISCREG_EFER, efer);
+
+ //Set up the registers that describe the operating mode.
+ CR0 cr0 = 0;
+ cr0.pg = 1; // Turn on paging.
+ cr0.cd = 0; // Don't disable caching.
+ cr0.nw = 0; // This is bit is defined to be ignored.
+ cr0.am = 0; // No alignment checking
+ cr0.wp = 0; // Supervisor mode can write read only pages
+ cr0.ne = 1;
+ cr0.et = 1; // This should always be 1
+ cr0.ts = 0; // We don't do task switching, so causing fp exceptions
+ // would be pointless.
+ cr0.em = 0; // Allow x87 instructions to execute natively.
+ cr0.mp = 1; // This doesn't really matter, but the manual suggests
+ // setting it to one.
+ cr0.pe = 1; // We're definitely in protected mode.
+ tc->setMiscReg(MISCREG_CR0, cr0);
+
+ tc->setMiscReg(MISCREG_MXCSR, 0x1f80);
+ }
}
+template<class IntType>
void
-X86LiveProcess::argsInit(int intSize, int pageSize)
+X86LiveProcess::argsInit(int pageSize,
+ std::vector<AuxVector<IntType> > extraAuxvs)
{
- typedef M5_64_auxv_t auxv_t;
- Process::startup();
+ int intSize = sizeof(IntType);
+
+ typedef AuxVector<IntType> auxv_t;
+ std::vector<auxv_t> auxv = extraAuxvs;
string filename;
if(argv.size() < 1)
else
filename = argv[0];
- Addr alignmentMask = ~(intSize - 1);
+ //We want 16 byte alignment
+ uint64_t align = 16;
// load object file into target memory
objFile->loadSections(initVirtMem);
- //These are the auxilliary vector types
- enum auxTypes
- {
- X86_AT_NULL = 0,
- X86_AT_IGNORE = 1,
- X86_AT_EXECFD = 2,
- X86_AT_PHDR = 3,
- X86_AT_PHENT = 4,
- X86_AT_PHNUM = 5,
- X86_AT_PAGESZ = 6,
- X86_AT_BASE = 7,
- X86_AT_FLAGS = 8,
- X86_AT_ENTRY = 9,
- X86_AT_NOTELF = 10,
- X86_AT_UID = 11,
- X86_AT_EUID = 12,
- X86_AT_GID = 13,
- X86_AT_EGID = 14,
- X86_AT_PLATFORM = 15,
- X86_AT_HWCAP = 16,
- X86_AT_CLKTCK = 17,
-
- X86_AT_SECURE = 13,
-
- X86_AT_VECTOR_SIZE = 44
+ enum X86CpuFeature {
+ X86_OnboardFPU = 1 << 0,
+ X86_VirtualModeExtensions = 1 << 1,
+ X86_DebuggingExtensions = 1 << 2,
+ X86_PageSizeExtensions = 1 << 3,
+
+ X86_TimeStampCounter = 1 << 4,
+ X86_ModelSpecificRegisters = 1 << 5,
+ X86_PhysicalAddressExtensions = 1 << 6,
+ X86_MachineCheckExtensions = 1 << 7,
+
+ X86_CMPXCHG8Instruction = 1 << 8,
+ X86_OnboardAPIC = 1 << 9,
+ X86_SYSENTER_SYSEXIT = 1 << 11,
+
+ X86_MemoryTypeRangeRegisters = 1 << 12,
+ X86_PageGlobalEnable = 1 << 13,
+ X86_MachineCheckArchitecture = 1 << 14,
+ X86_CMOVInstruction = 1 << 15,
+
+ X86_PageAttributeTable = 1 << 16,
+ X86_36BitPSEs = 1 << 17,
+ X86_ProcessorSerialNumber = 1 << 18,
+ X86_CLFLUSHInstruction = 1 << 19,
+
+ X86_DebugTraceStore = 1 << 21,
+ X86_ACPIViaMSR = 1 << 22,
+ X86_MultimediaExtensions = 1 << 23,
+
+ X86_FXSAVE_FXRSTOR = 1 << 24,
+ X86_StreamingSIMDExtensions = 1 << 25,
+ X86_StreamingSIMDExtensions2 = 1 << 26,
+ X86_CPUSelfSnoop = 1 << 27,
+
+ X86_HyperThreading = 1 << 28,
+ X86_AutomaticClockControl = 1 << 29,
+ X86_IA64Processor = 1 << 30
};
//Setup the auxilliary vectors. These will already have endian conversion.
ElfObject * elfObject = dynamic_cast<ElfObject *>(objFile);
if(elfObject)
{
+ uint64_t features =
+ X86_OnboardFPU |
+ X86_VirtualModeExtensions |
+ X86_DebuggingExtensions |
+ X86_PageSizeExtensions |
+ X86_TimeStampCounter |
+ X86_ModelSpecificRegisters |
+ X86_PhysicalAddressExtensions |
+ X86_MachineCheckExtensions |
+ X86_CMPXCHG8Instruction |
+ X86_OnboardAPIC |
+ X86_SYSENTER_SYSEXIT |
+ X86_MemoryTypeRangeRegisters |
+ X86_PageGlobalEnable |
+ X86_MachineCheckArchitecture |
+ X86_CMOVInstruction |
+ X86_PageAttributeTable |
+ X86_36BitPSEs |
+// X86_ProcessorSerialNumber |
+ X86_CLFLUSHInstruction |
+// X86_DebugTraceStore |
+// X86_ACPIViaMSR |
+ X86_MultimediaExtensions |
+ X86_FXSAVE_FXRSTOR |
+ X86_StreamingSIMDExtensions |
+ X86_StreamingSIMDExtensions2 |
+// X86_CPUSelfSnoop |
+// X86_HyperThreading |
+// X86_AutomaticClockControl |
+// X86_IA64Processor |
+ 0;
+
//Bits which describe the system hardware capabilities
//XXX Figure out what these should be
- auxv.push_back(auxv_t(X86_AT_HWCAP, 0));
+ auxv.push_back(auxv_t(M5_AT_HWCAP, features));
//The system page size
- auxv.push_back(auxv_t(X86_AT_PAGESZ, X86ISA::VMPageSize));
+ auxv.push_back(auxv_t(M5_AT_PAGESZ, X86ISA::VMPageSize));
//Frequency at which times() increments
- auxv.push_back(auxv_t(X86_AT_CLKTCK, 100));
+ //Defined to be 100 in the kernel source.
+ auxv.push_back(auxv_t(M5_AT_CLKTCK, 100));
// For statically linked executables, this is the virtual address of the
// program header tables if they appear in the executable image
- auxv.push_back(auxv_t(X86_AT_PHDR, elfObject->programHeaderTable()));
+ auxv.push_back(auxv_t(M5_AT_PHDR, elfObject->programHeaderTable()));
// This is the size of a program header entry from the elf file.
- auxv.push_back(auxv_t(X86_AT_PHENT, elfObject->programHeaderSize()));
+ auxv.push_back(auxv_t(M5_AT_PHENT, elfObject->programHeaderSize()));
// This is the number of program headers from the original elf file.
- auxv.push_back(auxv_t(X86_AT_PHNUM, elfObject->programHeaderCount()));
- //Defined to be 100 in the kernel source.
+ auxv.push_back(auxv_t(M5_AT_PHNUM, elfObject->programHeaderCount()));
//This is the address of the elf "interpreter", It should be set
//to 0 for regular executables. It should be something else
//(not sure what) for dynamic libraries.
- auxv.push_back(auxv_t(X86_AT_BASE, 0));
+ auxv.push_back(auxv_t(M5_AT_BASE, 0));
//XXX Figure out what this should be.
- auxv.push_back(auxv_t(X86_AT_FLAGS, 0));
+ auxv.push_back(auxv_t(M5_AT_FLAGS, 0));
//The entry point to the program
- auxv.push_back(auxv_t(X86_AT_ENTRY, objFile->entryPoint()));
+ auxv.push_back(auxv_t(M5_AT_ENTRY, objFile->entryPoint()));
//Different user and group IDs
- auxv.push_back(auxv_t(X86_AT_UID, uid()));
- auxv.push_back(auxv_t(X86_AT_EUID, euid()));
- auxv.push_back(auxv_t(X86_AT_GID, gid()));
- auxv.push_back(auxv_t(X86_AT_EGID, egid()));
+ auxv.push_back(auxv_t(M5_AT_UID, uid()));
+ auxv.push_back(auxv_t(M5_AT_EUID, euid()));
+ auxv.push_back(auxv_t(M5_AT_GID, gid()));
+ auxv.push_back(auxv_t(M5_AT_EGID, egid()));
//Whether to enable "secure mode" in the executable
- auxv.push_back(auxv_t(X86_AT_SECURE, 0));
- //The string "x86_64" with unknown meaning
- auxv.push_back(auxv_t(X86_AT_PLATFORM, 0));
+ auxv.push_back(auxv_t(M5_AT_SECURE, 0));
+ //The address of 16 "random" bytes.
+ auxv.push_back(auxv_t(M5_AT_RANDOM, 0));
+ //The name of the program
+ auxv.push_back(auxv_t(M5_AT_EXECFN, 0));
+ //The platform string
+ auxv.push_back(auxv_t(M5_AT_PLATFORM, 0));
}
//Figure out how big the initial stack needs to be
- // The unaccounted for 0 at the top of the stack
- int mysterious_size = intSize;
+ // A sentry NULL void pointer at the top of the stack.
+ int sentry_size = intSize;
//This is the name of the file which is present on the initial stack
//It's purpose is to let the user space linker examine the original file.
int file_name_size = filename.size() + 1;
+ const int numRandomBytes = 16;
+ int aux_data_size = numRandomBytes;
+
+ string platform = "x86_64";
+ aux_data_size += platform.size() + 1;
+
int env_data_size = 0;
for (int i = 0; i < envp.size(); ++i) {
env_data_size += envp[i].size() + 1;
//alignment mask. Also, it appears that there needs to be at least some
//padding, so if the size is already a multiple, we need to increase it
//anyway.
- int info_block_size =
- (file_name_size +
- env_data_size +
- arg_data_size +
- intSize) & alignmentMask;
-
- int info_block_padding =
- info_block_size -
- file_name_size -
- env_data_size -
- arg_data_size;
+ int base_info_block_size =
+ sentry_size + file_name_size + env_data_size + arg_data_size;
+
+ int info_block_size = roundUp(base_info_block_size, align);
+
+ int info_block_padding = info_block_size - base_info_block_size;
//Each auxilliary vector is two 8 byte words
int aux_array_size = intSize * 2 * (auxv.size() + 1);
int argc_size = intSize;
- int space_needed =
- mysterious_size +
- info_block_size +
+ //Figure out the size of the contents of the actual initial frame
+ int frame_size =
aux_array_size +
envp_array_size +
argv_array_size +
argc_size;
+ //There needs to be padding after the auxiliary vector data so that the
+ //very bottom of the stack is aligned properly.
+ int partial_size = frame_size + aux_data_size;
+ int aligned_partial_size = roundUp(partial_size, align);
+ int aux_padding = aligned_partial_size - partial_size;
+
+ int space_needed =
+ info_block_size +
+ aux_data_size +
+ aux_padding +
+ frame_size;
+
stack_min = stack_base - space_needed;
- stack_min &= alignmentMask;
+ stack_min = roundDown(stack_min, align);
stack_size = stack_base - stack_min;
// map memory
roundUp(stack_size, pageSize));
// map out initial stack contents
- Addr mysterious_base = stack_base - mysterious_size;
- Addr file_name_base = mysterious_base - file_name_size;
- Addr env_data_base = file_name_base - env_data_size;
- Addr arg_data_base = env_data_base - arg_data_size;
- Addr auxv_array_base = arg_data_base - aux_array_size - info_block_padding;
- Addr envp_array_base = auxv_array_base - envp_array_size;
- Addr argv_array_base = envp_array_base - argv_array_size;
- Addr argc_base = argv_array_base - argc_size;
-
- DPRINTF(X86, "The addresses of items on the initial stack:\n");
- DPRINTF(X86, "0x%x - file name\n", file_name_base);
- DPRINTF(X86, "0x%x - env data\n", env_data_base);
- DPRINTF(X86, "0x%x - arg data\n", arg_data_base);
- DPRINTF(X86, "0x%x - auxv array\n", auxv_array_base);
- DPRINTF(X86, "0x%x - envp array\n", envp_array_base);
- DPRINTF(X86, "0x%x - argv array\n", argv_array_base);
- DPRINTF(X86, "0x%x - argc \n", argc_base);
- DPRINTF(X86, "0x%x - stack min\n", stack_min);
+ IntType sentry_base = stack_base - sentry_size;
+ IntType file_name_base = sentry_base - file_name_size;
+ IntType env_data_base = file_name_base - env_data_size;
+ IntType arg_data_base = env_data_base - arg_data_size;
+ IntType aux_data_base = arg_data_base - info_block_padding - aux_data_size;
+ IntType auxv_array_base = aux_data_base - aux_array_size - aux_padding;
+ IntType envp_array_base = auxv_array_base - envp_array_size;
+ IntType argv_array_base = envp_array_base - argv_array_size;
+ IntType argc_base = argv_array_base - argc_size;
+
+ DPRINTF(Stack, "The addresses of items on the initial stack:\n");
+ DPRINTF(Stack, "0x%x - file name\n", file_name_base);
+ DPRINTF(Stack, "0x%x - env data\n", env_data_base);
+ DPRINTF(Stack, "0x%x - arg data\n", arg_data_base);
+ DPRINTF(Stack, "0x%x - aux data\n", aux_data_base);
+ DPRINTF(Stack, "0x%x - auxv array\n", auxv_array_base);
+ DPRINTF(Stack, "0x%x - envp array\n", envp_array_base);
+ DPRINTF(Stack, "0x%x - argv array\n", argv_array_base);
+ DPRINTF(Stack, "0x%x - argc \n", argc_base);
+ DPRINTF(Stack, "0x%x - stack min\n", stack_min);
// write contents to stack
// figure out argc
- uint64_t argc = argv.size();
- uint64_t guestArgc = TheISA::htog(argc);
+ IntType argc = argv.size();
+ IntType guestArgc = X86ISA::htog(argc);
- //Write out the mysterious 0
- uint64_t mysterious_zero = 0;
- initVirtMem->writeBlob(mysterious_base,
- (uint8_t*)&mysterious_zero, mysterious_size);
+ //Write out the sentry void *
+ IntType sentry_NULL = 0;
+ initVirtMem->writeBlob(sentry_base,
+ (uint8_t*)&sentry_NULL, sentry_size);
//Write the file name
initVirtMem->writeString(file_name_base, filename.c_str());
+ //Fix up the aux vectors which point to data
+ assert(auxv[auxv.size() - 3].a_type == M5_AT_RANDOM);
+ auxv[auxv.size() - 3].a_val = aux_data_base;
+ assert(auxv[auxv.size() - 2].a_type == M5_AT_EXECFN);
+ auxv[auxv.size() - 2].a_val = argv_array_base;
+ assert(auxv[auxv.size() - 1].a_type == M5_AT_PLATFORM);
+ auxv[auxv.size() - 1].a_val = aux_data_base + numRandomBytes;
+
//Copy the aux stuff
for(int x = 0; x < auxv.size(); x++)
{
initVirtMem->writeBlob(auxv_array_base + 2 * intSize * auxv.size(),
(uint8_t*)&zero, 2 * intSize);
+ initVirtMem->writeString(aux_data_base, platform.c_str());
+
copyStringArray(envp, envp_array_base, env_data_base, initVirtMem);
copyStringArray(argv, argv_array_base, arg_data_base, initVirtMem);
initVirtMem->writeBlob(argc_base, (uint8_t*)&guestArgc, intSize);
- //Set up the thread context to start running the process
- threadContexts[0]->setIntReg(StackPointerReg, stack_min);
+ ThreadContext *tc = system->getThreadContext(contextIds[0]);
+ //Set the stack pointer register
+ tc->setIntReg(StackPointerReg, stack_min);
- Addr prog_entry = objFile->entryPoint();
- threadContexts[0]->setPC(prog_entry);
- threadContexts[0]->setNextPC(prog_entry + sizeof(MachInst));
+ // There doesn't need to be any segment base added in since we're dealing
+ // with the flat segmentation model.
+ tc->pcState(objFile->entryPoint());
//Align the "stack_min" to a page boundary.
stack_min = roundDown(stack_min, pageSize);
// num_processes++;
}
+
+void
+X86_64LiveProcess::argsInit(int intSize, int pageSize)
+{
+ std::vector<AuxVector<uint64_t> > extraAuxvs;
+ extraAuxvs.push_back(AuxVector<uint64_t>(M5_AT_SYSINFO_EHDR,
+ vsyscallPage.base));
+ X86LiveProcess::argsInit<uint64_t>(pageSize, extraAuxvs);
+}
+
+void
+I386LiveProcess::argsInit(int intSize, int pageSize)
+{
+ std::vector<AuxVector<uint32_t> > extraAuxvs;
+ //Tell the binary where the vsyscall part of the vsyscall page is.
+ extraAuxvs.push_back(AuxVector<uint32_t>(M5_AT_SYSINFO,
+ vsyscallPage.base + vsyscallPage.vsyscallOffset));
+ extraAuxvs.push_back(AuxVector<uint32_t>(M5_AT_SYSINFO_EHDR,
+ vsyscallPage.base));
+ X86LiveProcess::argsInit<uint32_t>(pageSize, extraAuxvs);
+}
+
+void
+X86LiveProcess::setSyscallReturn(ThreadContext *tc, SyscallReturn return_value)
+{
+ tc->setIntReg(INTREG_RAX, return_value.value());
+}
+
+X86ISA::IntReg
+X86_64LiveProcess::getSyscallArg(ThreadContext *tc, int &i)
+{
+ assert(i < NumArgumentRegs);
+ return tc->readIntReg(ArgumentReg[i++]);
+}
+
+void
+X86_64LiveProcess::setSyscallArg(ThreadContext *tc, int i, X86ISA::IntReg val)
+{
+ assert(i < NumArgumentRegs);
+ return tc->setIntReg(ArgumentReg[i], val);
+}
+
+X86ISA::IntReg
+I386LiveProcess::getSyscallArg(ThreadContext *tc, int &i)
+{
+ assert(i < NumArgumentRegs32);
+ return tc->readIntReg(ArgumentReg32[i++]);
+}
+
+X86ISA::IntReg
+I386LiveProcess::getSyscallArg(ThreadContext *tc, int &i, int width)
+{
+ assert(width == 32 || width == 64);
+ assert(i < NumArgumentRegs);
+ uint64_t retVal = tc->readIntReg(ArgumentReg32[i++]) & mask(32);
+ if (width == 64)
+ retVal |= ((uint64_t)tc->readIntReg(ArgumentReg[i++]) << 32);
+ return retVal;
+}
+
+void
+I386LiveProcess::setSyscallArg(ThreadContext *tc, int i, X86ISA::IntReg val)
+{
+ assert(i < NumArgumentRegs);
+ return tc->setIntReg(ArgumentReg[i], val);
+}