/*
* Copyright (c) 2007 The Hewlett-Packard Development Company
+ * Copyright (c) 2011 Advanced Micro Devices, Inc.
* All rights reserved.
*
- * Redistribution and use of this software in source and binary forms,
- * with or without modification, are permitted provided that the
- * following conditions are met:
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
*
- * The software must be used only for Non-Commercial Use which means any
- * use which is NOT directed to receiving any direct monetary
- * compensation for, or commercial advantage from such use. Illustrative
- * examples of non-commercial use are academic research, personal study,
- * teaching, education and corporate research & development.
- * Illustrative examples of commercial use are distributing products for
- * commercial advantage and providing services using the software for
- * commercial advantage.
- *
- * If you wish to use this software or functionality therein that may be
- * covered by patents for commercial use, please contact:
- * Director of Intellectual Property Licensing
- * Office of Strategy and Technology
- * Hewlett-Packard Company
- * 1501 Page Mill Road
- * Palo Alto, California 94304
- *
- * Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer. Redistributions
- * in binary form must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or
- * other materials provided with the distribution. Neither the name of
- * the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ * redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution;
+ * neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission. No right of
- * sublicense is granted herewith. Derivatives of the software and
- * output created using the software may be prepared, but only for
- * Non-Commercial Uses. Derivatives of the software may be shared with
- * others provided: (i) the others agree to abide by the list of
- * conditions herein which includes the Non-Commercial Use restrictions;
- * and (ii) such Derivatives of the software include the above copyright
- * notice to acknowledge the contribution from this software where
- * applicable, this list of conditions and the disclaimer below.
+ * this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* Authors: Gabe Black
*/
-#include "arch/x86/intregs.hh"
-#include "arch/x86/miscregs.hh"
-#include "arch/x86/segmentregs.hh"
+#include "arch/x86/interrupts.hh"
+#include "arch/x86/registers.hh"
+#include "arch/x86/tlb.hh"
#include "arch/x86/utility.hh"
#include "arch/x86/x86_traits.hh"
+#include "cpu/base.hh"
+#include "fputils/fp80.h"
+#include "sim/system.hh"
namespace X86ISA {
-uint64_t getArgument(ThreadContext *tc, int number, bool fp) {
-#if FULL_SYSTEM
- panic("getArgument() not implemented for x86!\n");
-#else
- panic("getArgument() only implemented for FULL_SYSTEM\n");
- M5_DUMMY_RETURN
-#endif
+uint64_t
+getArgument(ThreadContext *tc, int &number, uint16_t size, bool fp)
+{
+ if (fp) {
+ panic("getArgument(): Floating point arguments not implemented\n");
+ } else if (size != 8) {
+ panic("getArgument(): Can only handle 64-bit arguments.\n");
+ }
+
+ // The first 6 integer arguments are passed in registers, the rest
+ // are passed on the stack.
+ const int int_reg_map[] = {
+ INTREG_RDI, INTREG_RSI, INTREG_RDX,
+ INTREG_RCX, INTREG_R8, INTREG_R9
+ };
+ if (number < sizeof(int_reg_map) / sizeof(*int_reg_map)) {
+ return tc->readIntReg(int_reg_map[number]);
+ } else {
+ panic("getArgument(): Don't know how to handle stack arguments.\n");
+ }
}
-# if FULL_SYSTEM
void initCPU(ThreadContext *tc, int cpuId)
{
- // The otherwise unmodified integer registers should be set to 0.
- for (int index = 0; index < NUM_INTREGS; index++) {
- tc->setIntReg(index, 0);
- }
+ // This function is essentially performing a reset. The actual INIT
+ // interrupt does a subset of this, so we'll piggyback on some of its
+ // functionality.
+ InitInterrupt init(0);
+ init.invoke(tc);
+
+ PCState pc = tc->pcState();
+ pc.upc(0);
+ pc.nupc(1);
+ tc->pcState(pc);
// These next two loops zero internal microcode and implicit registers.
// They aren't specified by the ISA but are used internally by M5's
// register for errors.
tc->setIntReg(INTREG_RAX, 0);
- //The following values are dictated by the architecture for after a RESET#
- tc->setMiscReg(MISCREG_CR0, 0x0000000060000010);
- tc->setMiscReg(MISCREG_CR2, 0);
- tc->setMiscReg(MISCREG_CR3, 0);
- tc->setMiscReg(MISCREG_CR4, 0);
+ tc->setMiscReg(MISCREG_CR0, 0x0000000060000010ULL);
tc->setMiscReg(MISCREG_CR8, 0);
- tc->setMiscReg(MISCREG_RFLAGS, 0x0000000000000002);
-
- tc->setMiscReg(MISCREG_EFER, 0);
-
- SegAttr dataAttr = 0;
- dataAttr.writable = 1;
- dataAttr.readable = 1;
- dataAttr.expandDown = 0;
- dataAttr.dpl = 0;
- dataAttr.defaultSize = 0;
-
- for (int seg = 0; seg != NUM_SEGMENTREGS; seg++) {
- tc->setMiscReg(MISCREG_SEG_SEL(seg), 0);
- tc->setMiscReg(MISCREG_SEG_BASE(seg), 0);
- tc->setMiscReg(MISCREG_SEG_LIMIT(seg), 0xffff);
- tc->setMiscReg(MISCREG_SEG_ATTR(seg), dataAttr);
- }
-
- SegAttr codeAttr = 0;
- codeAttr.writable = 0;
- codeAttr.readable = 1;
- codeAttr.expandDown = 0;
- codeAttr.dpl = 0;
- codeAttr.defaultSize = 0;
-
- tc->setMiscReg(MISCREG_CS, 0xf000);
- tc->setMiscReg(MISCREG_CS_BASE, 0x00000000ffff0000);
- // This has the base value pre-added.
- tc->setMiscReg(MISCREG_CS_LIMIT, 0xffffffff);
- tc->setMiscReg(MISCREG_CS_ATTR, codeAttr);
-
- tc->setPC(0x000000000000fff0 +
- tc->readMiscReg(MISCREG_CS_BASE));
- tc->setNextPC(tc->readPC() + sizeof(MachInst));
-
- tc->setMiscReg(MISCREG_GDTR_BASE, 0);
- tc->setMiscReg(MISCREG_GDTR_LIMIT, 0xffff);
-
- tc->setMiscReg(MISCREG_IDTR_BASE, 0);
- tc->setMiscReg(MISCREG_IDTR_LIMIT, 0xffff);
-
- tc->setMiscReg(MISCREG_LDTR, 0);
- tc->setMiscReg(MISCREG_LDTR_BASE, 0);
- tc->setMiscReg(MISCREG_LDTR_LIMIT, 0xffff);
- tc->setMiscReg(MISCREG_LDTR_ATTR, 0);
-
- tc->setMiscReg(MISCREG_TR, 0);
- tc->setMiscReg(MISCREG_TR_BASE, 0);
- tc->setMiscReg(MISCREG_TR_LIMIT, 0xffff);
- tc->setMiscReg(MISCREG_TR_ATTR, 0);
-
- // This value should be the family/model/stepping of the processor.
- // (page 418). It should be consistent with the value from CPUID, but the
- // actual value probably doesn't matter much.
- tc->setIntReg(INTREG_RDX, 0);
-
// TODO initialize x87, 64 bit, and 128 bit media state
tc->setMiscReg(MISCREG_MTRRCAP, 0x0508);
tc->setMiscReg(MISCREG_MC_MISC(i), 0);
}
- tc->setMiscReg(MISCREG_DR0, 0);
- tc->setMiscReg(MISCREG_DR1, 0);
- tc->setMiscReg(MISCREG_DR2, 0);
- tc->setMiscReg(MISCREG_DR3, 0);
-
- tc->setMiscReg(MISCREG_DR6, 0x00000000ffff0ff0);
- tc->setMiscReg(MISCREG_DR7, 0x0000000000000400);
-
tc->setMiscReg(MISCREG_TSC, 0);
tc->setMiscReg(MISCREG_TSC_AUX, 0);
tc->setMiscReg(MISCREG_SYSENTER_ESP, 0);
tc->setMiscReg(MISCREG_SYSENTER_EIP, 0);
- tc->setMiscReg(MISCREG_PAT, 0x0007040600070406);
+ tc->setMiscReg(MISCREG_PAT, 0x0007040600070406ULL);
tc->setMiscReg(MISCREG_SYSCFG, 0x20601);
// Invalidate the caches (this should already be done for us)
- // TODO Turn on the APIC. This should be handled elsewhere but it isn't
- // currently being handled at all.
+ LocalApicBase lApicBase = 0;
+ lApicBase.base = 0xFEE00000 >> 12;
+ lApicBase.enable = 1;
+ lApicBase.bsp = (cpuId == 0);
+ tc->setMiscReg(MISCREG_APIC_BASE, lApicBase);
+
+ Interrupts * interrupts = dynamic_cast<Interrupts *>(
+ tc->getCpuPtr()->getInterruptController(0));
+ assert(interrupts);
+
+ interrupts->setRegNoEffect(APIC_ID, cpuId << 24);
+
+ interrupts->setRegNoEffect(APIC_VERSION, (5 << 16) | 0x14);
// TODO Set the SMRAM base address (SMBASE) to 0x00030000
tc->setMiscReg(MISCREG_VM_HSAVE_PA, 0);
}
-#endif
-
void startupCPU(ThreadContext *tc, int cpuId)
{
- if (cpuId == 0) {
- // This is the boot strap processor (BSP). Initialize it to look like
- // the boot loader has just turned control over to the 64 bit OS.
-
- // Enable paging, turn on long mode, etc.
-
- tc->activate(0);
+ if (cpuId == 0 || !FullSystem) {
+ tc->activate();
} else {
// This is an application processor (AP). It should be initialized to
// look like only the BIOS POST has run on it and put then put it into
// a halted state.
+ tc->suspend();
}
}
-} //namespace X86_ISA
+void
+copyMiscRegs(ThreadContext *src, ThreadContext *dest)
+{
+ // This function assumes no side effects other than TLB invalidation
+ // need to be considered while copying state. That will likely not be
+ // true in the future.
+ for (int i = 0; i < NUM_MISCREGS; ++i) {
+ if (!isValidMiscReg(i))
+ continue;
+
+ dest->setMiscRegNoEffect(i, src->readMiscRegNoEffect(i));
+ }
+
+ // The TSC has to be updated with side-effects if the CPUs in a
+ // CPU switch have different frequencies.
+ dest->setMiscReg(MISCREG_TSC, src->readMiscReg(MISCREG_TSC));
+
+ dest->getITBPtr()->flushAll();
+ dest->getDTBPtr()->flushAll();
+}
+
+void
+copyRegs(ThreadContext *src, ThreadContext *dest)
+{
+ //copy int regs
+ for (int i = 0; i < NumIntRegs; ++i)
+ dest->setIntRegFlat(i, src->readIntRegFlat(i));
+ //copy float regs
+ for (int i = 0; i < NumFloatRegs; ++i)
+ dest->setFloatRegBitsFlat(i, src->readFloatRegBitsFlat(i));
+ //copy condition-code regs
+ for (int i = 0; i < NumCCRegs; ++i)
+ dest->setCCRegFlat(i, src->readCCRegFlat(i));
+ copyMiscRegs(src, dest);
+ dest->pcState(src->pcState());
+}
+
+void
+skipFunction(ThreadContext *tc)
+{
+ panic("Not implemented for x86\n");
+}
+
+uint64_t
+getRFlags(ThreadContext *tc)
+{
+ const uint64_t ncc_flags(tc->readMiscRegNoEffect(MISCREG_RFLAGS));
+ const uint64_t cc_flags(tc->readCCReg(X86ISA::CCREG_ZAPS));
+ const uint64_t cfof_bits(tc->readCCReg(X86ISA::CCREG_CFOF));
+ const uint64_t df_bit(tc->readCCReg(X86ISA::CCREG_DF));
+ // ecf (PSEUDO(3)) & ezf (PSEUDO(4)) are only visible to
+ // microcode, so we can safely ignore them.
+
+ // Reconstruct the real rflags state, mask out internal flags, and
+ // make sure reserved bits have the expected values.
+ return ((ncc_flags | cc_flags | cfof_bits | df_bit) & 0x3F7FD5)
+ | 0x2;
+}
+
+void
+setRFlags(ThreadContext *tc, uint64_t val)
+{
+ tc->setCCReg(X86ISA::CCREG_ZAPS, val & ccFlagMask);
+ tc->setCCReg(X86ISA::CCREG_CFOF, val & cfofMask);
+ tc->setCCReg(X86ISA::CCREG_DF, val & DFBit);
+
+ // Internal microcode registers (ECF & EZF)
+ tc->setCCReg(X86ISA::CCREG_ECF, 0);
+ tc->setCCReg(X86ISA::CCREG_EZF, 0);
+
+ // Update the RFLAGS misc reg with whatever didn't go into the
+ // magic registers.
+ tc->setMiscReg(MISCREG_RFLAGS, val & ~(ccFlagMask | cfofMask | DFBit));
+}
+
+uint8_t
+convX87TagsToXTags(uint16_t ftw)
+{
+ uint8_t ftwx(0);
+ for (int i = 0; i < 8; ++i) {
+ // Extract the tag for the current element on the FP stack
+ const unsigned tag((ftw >> (2 * i)) & 0x3);
+
+ /*
+ * Check the type of the current FP element. Valid values are:
+ * 0 == Valid
+ * 1 == Zero
+ * 2 == Special (Nan, unsupported, infinity, denormal)
+ * 3 == Empty
+ */
+ // The xsave version of the tag word only keeps track of
+ // whether the element is empty or not. Set the corresponding
+ // bit in the ftwx if it's not empty,
+ if (tag != 0x3)
+ ftwx |= 1 << i;
+ }
+
+ return ftwx;
+}
+
+uint16_t
+convX87XTagsToTags(uint8_t ftwx)
+{
+ uint16_t ftw(0);
+ for (int i = 0; i < 8; ++i) {
+ const unsigned xtag(((ftwx >> i) & 0x1));
+
+ // The xtag for an x87 stack position is 0 for empty stack positions.
+ if (!xtag) {
+ // Set the tag word to 3 (empty) for the current element.
+ ftw |= 0x3 << (2 * i);
+ } else {
+ // TODO: We currently assume that non-empty elements are
+ // valid (0x0), but we should ideally reconstruct the full
+ // state (valid/zero/special).
+ }
+ }
+
+ return ftw;
+}
+
+uint16_t
+genX87Tags(uint16_t ftw, uint8_t top, int8_t spm)
+{
+ const uint8_t new_top((top + spm + 8) % 8);
+
+ if (spm > 0) {
+ // Removing elements from the stack. Flag the elements as empty.
+ for (int i = top; i != new_top; i = (i + 1 + 8) % 8)
+ ftw |= 0x3 << (2 * i);
+ } else if (spm < 0) {
+ // Adding elements to the stack. Flag the new elements as
+ // valid. We should ideally decode them and "do the right
+ // thing".
+ for (int i = new_top; i != top; i = (i + 1 + 8) % 8)
+ ftw &= ~(0x3 << (2 * i));
+ }
+
+ return ftw;
+}
+
+double
+loadFloat80(const void *_mem)
+{
+ const fp80_t *fp80((const fp80_t *)_mem);
+
+ return fp80_cvtd(*fp80);
+}
+
+void
+storeFloat80(void *_mem, double value)
+{
+ fp80_t *fp80((fp80_t *)_mem);
+
+ *fp80 = fp80_cvfd(value);
+}
+
+} // namespace X86_ISA
projects / gem5.git / blobdiff