/*
+ * Copyright (c) 2011 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Kevin Lim
+ * Geoffrey Blake
*/
#include <list>
#include <string>
+#include "arch/isa_traits.hh"
+#include "arch/vtophys.hh"
#include "base/refcnt.hh"
+#include "config/the_isa.hh"
#include "cpu/base_dyn_inst.hh"
-#include "cpu/checker/cpu.hh"
+#include "cpu/exetrace.hh"
#include "cpu/simple_thread.hh"
-#include "cpu/thread_context.hh"
#include "cpu/static_inst.hh"
+#include "cpu/thread_context.hh"
+#include "cpu/checker/cpu.hh"
+#include "debug/Checker.hh"
+#include "sim/full_system.hh"
#include "sim/sim_object.hh"
#include "sim/stats.hh"
-#if FULL_SYSTEM
-#include "arch/vtophys.hh"
-#endif // FULL_SYSTEM
-
using namespace std;
-//The CheckerCPU does alpha only
-using namespace AlphaISA;
+using namespace TheISA;
+
+template <class Impl>
+void
+Checker<Impl>::advancePC(Fault fault)
+{
+ if (fault != NoFault) {
+ curMacroStaticInst = StaticInst::nullStaticInstPtr;
+ fault->invoke(tc, curStaticInst);
+ thread->decoder.reset();
+ } else {
+ if (curStaticInst) {
+ if (curStaticInst->isLastMicroop())
+ curMacroStaticInst = StaticInst::nullStaticInstPtr;
+ TheISA::PCState pcState = thread->pcState();
+ TheISA::advancePC(pcState, curStaticInst);
+ thread->pcState(pcState);
+ DPRINTF(Checker, "Advancing PC to %s.\n", thread->pcState());
+ }
+ }
+}
+//////////////////////////////////////////////////
+
+template <class Impl>
+void
+Checker<Impl>::handlePendingInt()
+{
+ DPRINTF(Checker, "IRQ detected at PC: %s with %d insts in buffer\n",
+ thread->pcState(), instList.size());
+ DynInstPtr boundaryInst = NULL;
+ if (!instList.empty()) {
+ // Set the instructions as completed and verify as much as possible.
+ DynInstPtr inst;
+ typename std::list<DynInstPtr>::iterator itr;
+
+ for (itr = instList.begin(); itr != instList.end(); itr++) {
+ (*itr)->setCompleted();
+ }
+
+ inst = instList.front();
+ boundaryInst = instList.back();
+ verify(inst); // verify the instructions
+ inst = NULL;
+ }
+ if ((!boundaryInst && curMacroStaticInst &&
+ curStaticInst->isDelayedCommit() &&
+ !curStaticInst->isLastMicroop()) ||
+ (boundaryInst && boundaryInst->isDelayedCommit() &&
+ !boundaryInst->isLastMicroop())) {
+ panic("%lli: Trying to take an interrupt in middle of "
+ "a non-interuptable instruction!", curTick());
+ }
+ boundaryInst = NULL;
+ thread->decoder.reset();
+ curMacroStaticInst = StaticInst::nullStaticInstPtr;
+}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::verify(DynInstPtr &completed_inst)
+Checker<Impl>::verify(DynInstPtr &completed_inst)
{
DynInstPtr inst;
+ // Make sure serializing instructions are actually
+ // seen as serializing to commit. instList should be
+ // empty in these cases.
+ if ((completed_inst->isSerializing() ||
+ completed_inst->isSerializeBefore()) &&
+ (!instList.empty() ?
+ (instList.front()->seqNum != completed_inst->seqNum) : 0)) {
+ panic("%lli: Instruction sn:%lli at PC %s is serializing before but is"
+ " entering instList with other instructions\n", curTick(),
+ completed_inst->seqNum, completed_inst->pcState());
+ }
+
// Either check this instruction, or add it to a list of
// instructions waiting to be checked. Instructions must be
// checked in program order, so if a store has committed yet not
// behind it that have completed and must be checked.
if (!instList.empty()) {
if (youngestSN < completed_inst->seqNum) {
- DPRINTF(Checker, "Adding instruction [sn:%lli] PC:%#x to list.\n",
- completed_inst->seqNum, completed_inst->readPC());
+ DPRINTF(Checker, "Adding instruction [sn:%lli] PC:%s to list\n",
+ completed_inst->seqNum, completed_inst->pcState());
instList.push_back(completed_inst);
youngestSN = completed_inst->seqNum;
}
} else {
if (!completed_inst->isCompleted()) {
if (youngestSN < completed_inst->seqNum) {
- DPRINTF(Checker, "Adding instruction [sn:%lli] PC:%#x to list.\n",
- completed_inst->seqNum, completed_inst->readPC());
+ DPRINTF(Checker, "Adding instruction [sn:%lli] PC:%s to list\n",
+ completed_inst->seqNum, completed_inst->pcState());
instList.push_back(completed_inst);
youngestSN = completed_inst->seqNum;
}
}
}
+ // Make sure a serializing instruction is actually seen as
+ // serializing. instList should be empty here
+ if (inst->isSerializeAfter() && !instList.empty()) {
+ panic("%lli: Instruction sn:%lli at PC %s is serializing after but is"
+ " exiting instList with other instructions\n", curTick(),
+ completed_inst->seqNum, completed_inst->pcState());
+ }
unverifiedInst = inst;
+ inst = NULL;
// Try to check all instructions that are completed, ending if we
// run out of instructions to check or if an instruction is not
// yet completed.
while (1) {
- DPRINTF(Checker, "Processing instruction [sn:%lli] PC:%#x.\n",
- inst->seqNum, inst->readPC());
- unverifiedResult.integer = inst->readIntResult();
- unverifiedReq = inst->req;
- unverifiedMemData = inst->memData;
+ DPRINTF(Checker, "Processing instruction [sn:%lli] PC:%s.\n",
+ unverifiedInst->seqNum, unverifiedInst->pcState());
+ unverifiedReq = NULL;
+ unverifiedReq = unverifiedInst->reqToVerify;
+ unverifiedMemData = unverifiedInst->memData;
+ // Make sure results queue is empty
+ while (!result.empty()) {
+ result.pop();
+ }
numCycles++;
Fault fault = NoFault;
// maintain $r0 semantics
thread->setIntReg(ZeroReg, 0);
-#ifdef TARGET_ALPHA
- thread->setFloatRegDouble(ZeroReg, 0.0);
-#endif // TARGET_ALPHA
+#if THE_ISA == ALPHA_ISA
+ thread->setFloatReg(ZeroReg, 0.0);
+#endif
// Check if any recent PC changes match up with anything we
// expect to happen. This is mostly to check if traps or
// PC-based events have occurred in both the checker and CPU.
if (changedPC) {
- DPRINTF(Checker, "Changed PC recently to %#x\n",
- thread->readPC());
+ DPRINTF(Checker, "Changed PC recently to %s\n",
+ thread->pcState());
if (willChangePC) {
- if (newPC == thread->readPC()) {
+ if (newPCState == thread->pcState()) {
DPRINTF(Checker, "Changed PC matches expected PC\n");
} else {
warn("%lli: Changed PC does not match expected PC, "
- "changed: %#x, expected: %#x",
- curTick, thread->readPC(), newPC);
+ "changed: %s, expected: %s",
+ curTick(), thread->pcState(), newPCState);
CheckerCPU::handleError();
}
willChangePC = false;
}
if (changedNextPC) {
DPRINTF(Checker, "Changed NextPC recently to %#x\n",
- thread->readNextPC());
+ thread->nextInstAddr());
changedNextPC = false;
}
// Try to fetch the instruction
+ uint64_t fetchOffset = 0;
+ bool fetchDone = false;
+
+ while (!fetchDone) {
+ Addr fetch_PC = thread->instAddr();
+ fetch_PC = (fetch_PC & PCMask) + fetchOffset;
+
+ MachInst machInst;
+
+ // If not in the middle of a macro instruction
+ if (!curMacroStaticInst) {
+ // set up memory request for instruction fetch
+ memReq = new Request(unverifiedInst->threadNumber, fetch_PC,
+ sizeof(MachInst),
+ 0,
+ masterId,
+ fetch_PC, thread->contextId(),
+ unverifiedInst->threadNumber);
+ memReq->setVirt(0, fetch_PC, sizeof(MachInst),
+ Request::INST_FETCH, masterId, thread->instAddr());
+
+
+ fault = itb->translateFunctional(memReq, tc, BaseTLB::Execute);
+
+ if (fault != NoFault) {
+ if (unverifiedInst->getFault() == NoFault) {
+ // In this case the instruction was not a dummy
+ // instruction carrying an ITB fault. In the single
+ // threaded case the ITB should still be able to
+ // translate this instruction; in the SMT case it's
+ // possible that its ITB entry was kicked out.
+ warn("%lli: Instruction PC %s was not found in the "
+ "ITB!", curTick(), thread->pcState());
+ handleError(unverifiedInst);
+
+ // go to the next instruction
+ advancePC(NoFault);
+
+ // Give up on an ITB fault..
+ delete memReq;
+ unverifiedInst = NULL;
+ return;
+ } else {
+ // The instruction is carrying an ITB fault. Handle
+ // the fault and see if our results match the CPU on
+ // the next tick().
+ fault = unverifiedInst->getFault();
+ delete memReq;
+ break;
+ }
+ } else {
+ PacketPtr pkt = new Packet(memReq, MemCmd::ReadReq);
-#if FULL_SYSTEM
-#define IFETCH_FLAGS(pc) ((pc) & 1) ? PHYSICAL : 0
-#else
-#define IFETCH_FLAGS(pc) 0
-#endif
-
- uint64_t fetch_PC = thread->readPC() & ~3;
-
- // set up memory request for instruction fetch
- memReq = new Request(inst->threadNumber, fetch_PC,
- sizeof(uint32_t),
- IFETCH_FLAGS(thread->readPC()),
- fetch_PC, thread->readCpuId(), inst->threadNumber);
-
- bool succeeded = translateInstReq(memReq);
-
- if (!succeeded) {
- if (inst->getFault() == NoFault) {
- // In this case the instruction was not a dummy
- // instruction carrying an ITB fault. In the single
- // threaded case the ITB should still be able to
- // translate this instruction; in the SMT case it's
- // possible that its ITB entry was kicked out.
- warn("%lli: Instruction PC %#x was not found in the ITB!",
- curTick, thread->readPC());
- handleError(inst);
+ pkt->dataStatic(&machInst);
+ icachePort->sendFunctional(pkt);
+ machInst = gtoh(machInst);
- // go to the next instruction
- thread->setPC(thread->readNextPC());
- thread->setNextPC(thread->readNextPC() + sizeof(MachInst));
+ delete memReq;
+ delete pkt;
+ }
+ }
- break;
- } else {
- // The instruction is carrying an ITB fault. Handle
- // the fault and see if our results match the CPU on
- // the next tick().
- fault = inst->getFault();
+ if (fault == NoFault) {
+ TheISA::PCState pcState = thread->pcState();
+
+ if (isRomMicroPC(pcState.microPC())) {
+ fetchDone = true;
+ curStaticInst =
+ microcodeRom.fetchMicroop(pcState.microPC(), NULL);
+ } else if (!curMacroStaticInst) {
+ //We're not in the middle of a macro instruction
+ StaticInstPtr instPtr = NULL;
+
+ //Predecode, ie bundle up an ExtMachInst
+ //If more fetch data is needed, pass it in.
+ Addr fetchPC = (pcState.instAddr() & PCMask) + fetchOffset;
+ thread->decoder.moreBytes(pcState, fetchPC, machInst);
+
+ //If an instruction is ready, decode it.
+ //Otherwise, we'll have to fetch beyond the
+ //MachInst at the current pc.
+ if (thread->decoder.instReady()) {
+ fetchDone = true;
+ instPtr = thread->decoder.decode(pcState);
+ thread->pcState(pcState);
+ } else {
+ fetchDone = false;
+ fetchOffset += sizeof(TheISA::MachInst);
+ }
+
+ //If we decoded an instruction and it's microcoded,
+ //start pulling out micro ops
+ if (instPtr && instPtr->isMacroop()) {
+ curMacroStaticInst = instPtr;
+ curStaticInst =
+ instPtr->fetchMicroop(pcState.microPC());
+ } else {
+ curStaticInst = instPtr;
+ }
+ } else {
+ // Read the next micro op from the macro-op
+ curStaticInst =
+ curMacroStaticInst->fetchMicroop(pcState.microPC());
+ fetchDone = true;
+ }
}
}
+ // reset decoder on Checker
+ thread->decoder.reset();
+ // Check Checker and CPU get same instruction, and record
+ // any faults the CPU may have had.
+ Fault unverifiedFault;
if (fault == NoFault) {
- PacketPtr pkt = new Packet(memReq, Packet::ReadReq,
- Packet::Broadcast);
-
- pkt->dataStatic(&machInst);
-
- icachePort->sendFunctional(pkt);
-
- delete pkt;
-
- // keep an instruction count
- numInst++;
+ unverifiedFault = unverifiedInst->getFault();
- // decode the instruction
- machInst = gtoh(machInst);
// Checks that the instruction matches what we expected it to be.
// Checks both the machine instruction and the PC.
- validateInst(inst);
-
-#if THE_ISA == ALPHA_ISA
- curStaticInst = StaticInst::decode(makeExtMI(machInst,
- thread->readPC()));
-#elif THE_ISA == SPARC_ISA
- curStaticInst = StaticInst::decode(makeExtMI(machInst,
- thread->getTC()));
-#endif
-
-#if FULL_SYSTEM
- thread->setInst(machInst);
-#endif // FULL_SYSTEM
-
- fault = inst->getFault();
+ validateInst(unverifiedInst);
}
- // Discard fetch's memReq.
- delete memReq;
- memReq = NULL;
+ // keep an instruction count
+ numInst++;
+
// Either the instruction was a fault and we should process the fault,
// or we should just go ahead execute the instruction. This assumes
// that the instruction is properly marked as a fault.
if (fault == NoFault) {
+ // Execute Checker instruction and trace
+ if (!unverifiedInst->isUnverifiable()) {
+ Trace::InstRecord *traceData = tracer->getInstRecord(curTick(),
+ tc,
+ curStaticInst,
+ pcState(),
+ curMacroStaticInst);
+ fault = curStaticInst->execute(this, traceData);
+ if (traceData) {
+ traceData->dump();
+ delete traceData;
+ }
+ }
- thread->funcExeInst++;
-
- if (!inst->isUnverifiable())
- fault = curStaticInst->execute(this, NULL);
-
- // Checks to make sure instrution results are correct.
- validateExecution(inst);
+ if (fault == NoFault && unverifiedFault == NoFault) {
+ thread->funcExeInst++;
+ // Checks to make sure instrution results are correct.
+ validateExecution(unverifiedInst);
- if (curStaticInst->isLoad()) {
- ++numLoad;
+ if (curStaticInst->isLoad()) {
+ ++numLoad;
+ }
+ } else if (fault != NoFault && unverifiedFault == NoFault) {
+ panic("%lli: sn: %lli at PC: %s took a fault in checker "
+ "but not in driver CPU\n", curTick(),
+ unverifiedInst->seqNum, unverifiedInst->pcState());
+ } else if (fault == NoFault && unverifiedFault != NoFault) {
+ panic("%lli: sn: %lli at PC: %s took a fault in driver "
+ "CPU but not in checker\n", curTick(),
+ unverifiedInst->seqNum, unverifiedInst->pcState());
}
}
+ // Take any faults here
if (fault != NoFault) {
-#if FULL_SYSTEM
- fault->invoke(tc);
- willChangePC = true;
- newPC = thread->readPC();
- DPRINTF(Checker, "Fault, PC is now %#x\n", newPC);
-#endif
+ if (FullSystem) {
+ fault->invoke(tc, curStaticInst);
+ willChangePC = true;
+ newPCState = thread->pcState();
+ DPRINTF(Checker, "Fault, PC is now %s\n", newPCState);
+ curMacroStaticInst = StaticInst::nullStaticInstPtr;
+ }
} else {
-#if THE_ISA != MIPS_ISA
- // go to the next instruction
- thread->setPC(thread->readNextPC());
- thread->setNextPC(thread->readNextPC() + sizeof(MachInst));
-#else
- // go to the next instruction
- thread->setPC(thread->readNextPC());
- thread->setNextPC(thread->readNextNPC());
- thread->setNextNPC(thread->readNextNPC() + sizeof(MachInst));
-#endif
-
+ advancePC(fault);
}
-#if FULL_SYSTEM
- // @todo: Determine if these should happen only if the
- // instruction hasn't faulted. In the SimpleCPU case this may
- // not be true, but in the O3 or Ozone case this may be true.
- Addr oldpc;
- int count = 0;
- do {
- oldpc = thread->readPC();
- system->pcEventQueue.service(tc);
- count++;
- } while (oldpc != thread->readPC());
- if (count > 1) {
- willChangePC = true;
- newPC = thread->readPC();
- DPRINTF(Checker, "PC Event, PC is now %#x\n", newPC);
+ if (FullSystem) {
+ // @todo: Determine if these should happen only if the
+ // instruction hasn't faulted. In the SimpleCPU case this may
+ // not be true, but in the O3 or Ozone case this may be true.
+ Addr oldpc;
+ int count = 0;
+ do {
+ oldpc = thread->instAddr();
+ system->pcEventQueue.service(tc);
+ count++;
+ } while (oldpc != thread->instAddr());
+ if (count > 1) {
+ willChangePC = true;
+ newPCState = thread->pcState();
+ DPRINTF(Checker, "PC Event, PC is now %s\n", newPCState);
+ }
}
-#endif
// @todo: Optionally can check all registers. (Or just those
// that have been modified).
validateState();
- if (memReq) {
- delete memReq;
- memReq = NULL;
- }
-
// Continue verifying instructions if there's another completed
// instruction waiting to be verified.
if (instList.empty()) {
break;
} else if (instList.front()->isCompleted()) {
- inst = instList.front();
+ unverifiedInst = NULL;
+ unverifiedInst = instList.front();
instList.pop_front();
} else {
break;
unverifiedInst = NULL;
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::switchOut()
+Checker<Impl>::switchOut()
{
instList.clear();
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::takeOverFrom(BaseCPU *oldCPU)
+Checker<Impl>::takeOverFrom(BaseCPU *oldCPU)
{
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::validateInst(DynInstPtr &inst)
+Checker<Impl>::validateInst(DynInstPtr &inst)
{
- if (inst->readPC() != thread->readPC()) {
- warn("%lli: PCs do not match! Inst: %#x, checker: %#x",
- curTick, inst->readPC(), thread->readPC());
+ if (inst->instAddr() != thread->instAddr()) {
+ warn("%lli: PCs do not match! Inst: %s, checker: %s",
+ curTick(), inst->pcState(), thread->pcState());
if (changedPC) {
warn("%lli: Changed PCs recently, may not be an error",
- curTick);
+ curTick());
} else {
handleError(inst);
}
}
- MachInst mi = static_cast<MachInst>(inst->staticInst->machInst);
-
- if (mi != machInst) {
- warn("%lli: Binary instructions do not match! Inst: %#x, "
- "checker: %#x",
- curTick, mi, machInst);
- handleError(inst);
+ if (curStaticInst != inst->staticInst) {
+ warn("%lli: StaticInstPtrs don't match. (%s, %s).\n", curTick(),
+ curStaticInst->getName(), inst->staticInst->getName());
}
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::validateExecution(DynInstPtr &inst)
+Checker<Impl>::validateExecution(DynInstPtr &inst)
{
+ uint64_t checker_val;
+ uint64_t inst_val;
+ int idx = -1;
bool result_mismatch = false;
- if (inst->numDestRegs()) {
- // @todo: Support more destination registers.
- if (inst->isUnverifiable()) {
- // Unverifiable instructions assume they were executed
- // properly by the CPU. Grab the result from the
- // instruction and write it to the register.
- copyResult(inst);
- } else if (result.integer != inst->readIntResult()) {
- result_mismatch = true;
+
+ if (inst->isUnverifiable()) {
+ // Unverifiable instructions assume they were executed
+ // properly by the CPU. Grab the result from the
+ // instruction and write it to the register.
+ copyResult(inst, 0, idx);
+ } else if (inst->numDestRegs() > 0 && !result.empty()) {
+ DPRINTF(Checker, "Dest regs %d, number of checker dest regs %d\n",
+ inst->numDestRegs(), result.size());
+ for (int i = 0; i < inst->numDestRegs() && !result.empty(); i++) {
+ result.front().get(checker_val);
+ result.pop();
+ inst_val = 0;
+ inst->template popResult<uint64_t>(inst_val);
+ if (checker_val != inst_val) {
+ result_mismatch = true;
+ idx = i;
+ break;
+ }
}
- }
+ } // Checker CPU checks all the saved results in the dyninst passed by
+ // the cpu model being checked against the saved results present in
+ // the static inst executed in the Checker. Sometimes the number
+ // of saved results differs between the dyninst and static inst, but
+ // this is ok and not a bug. May be worthwhile to try and correct this.
if (result_mismatch) {
warn("%lli: Instruction results do not match! (Values may not "
"actually be integers) Inst: %#x, checker: %#x",
- curTick, inst->readIntResult(), result.integer);
+ curTick(), inst_val, checker_val);
// It's useful to verify load values from memory, but in MP
// systems the value obtained at execute may be different than
// the value obtained at completion. Similarly DMA can
// present the same problem on even UP systems. Thus there is
// the option to only warn on loads having a result error.
+ // The load/store queue in Detailed CPU can also cause problems
+ // if load/store forwarding is allowed.
if (inst->isLoad() && warnOnlyOnLoadError) {
- copyResult(inst);
+ copyResult(inst, inst_val, idx);
} else {
handleError(inst);
}
}
- if (inst->readNextPC() != thread->readNextPC()) {
+ if (inst->nextInstAddr() != thread->nextInstAddr()) {
warn("%lli: Instruction next PCs do not match! Inst: %#x, "
"checker: %#x",
- curTick, inst->readNextPC(), thread->readNextPC());
+ curTick(), inst->nextInstAddr(), thread->nextInstAddr());
handleError(inst);
}
thread->readMiscRegNoEffect(misc_reg_idx)) {
warn("%lli: Misc reg idx %i (side effect) does not match! "
"Inst: %#x, checker: %#x",
- curTick, misc_reg_idx,
+ curTick(), misc_reg_idx,
inst->tcBase()->readMiscRegNoEffect(misc_reg_idx),
thread->readMiscRegNoEffect(misc_reg_idx));
handleError(inst);
}
}
-template <class DynInstPtr>
+
+// This function is weird, if it is called it means the Checker and
+// O3 have diverged, so panic is called for now. It may be useful
+// to resynch states and continue if the divergence is a false positive
+template <class Impl>
void
-Checker<DynInstPtr>::validateState()
+Checker<Impl>::validateState()
{
if (updateThisCycle) {
- warn("%lli: Instruction PC %#x results didn't match up, copying all "
- "registers from main CPU", curTick, unverifiedInst->readPC());
+ // Change this back to warn if divergences end up being false positives
+ panic("%lli: Instruction PC %#x results didn't match up, copying all "
+ "registers from main CPU", curTick(), unverifiedInst->instAddr());
+
+ // Terribly convoluted way to make sure O3 model does not implode
+ bool no_squash_from_TC = unverifiedInst->thread->noSquashFromTC;
+ unverifiedInst->thread->noSquashFromTC = true;
+
// Heavy-weight copying of all registers
thread->copyArchRegs(unverifiedInst->tcBase());
+ unverifiedInst->thread->noSquashFromTC = no_squash_from_TC;
+
+ // Set curStaticInst to unverifiedInst->staticInst
+ curStaticInst = unverifiedInst->staticInst;
// Also advance the PC. Hopefully no PC-based events happened.
-#if THE_ISA != MIPS_ISA
- // go to the next instruction
- thread->setPC(thread->readNextPC());
- thread->setNextPC(thread->readNextPC() + sizeof(MachInst));
-#else
- // go to the next instruction
- thread->setPC(thread->readNextPC());
- thread->setNextPC(thread->readNextNPC());
- thread->setNextNPC(thread->readNextNPC() + sizeof(MachInst));
-#endif
+ advancePC(NoFault);
updateThisCycle = false;
}
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::copyResult(DynInstPtr &inst)
+Checker<Impl>::copyResult(DynInstPtr &inst, uint64_t mismatch_val,
+ int start_idx)
{
- RegIndex idx = inst->destRegIdx(0);
- if (idx < TheISA::FP_Base_DepTag) {
- thread->setIntReg(idx, inst->readIntResult());
- } else if (idx < TheISA::Fpcr_DepTag) {
- thread->setFloatRegBits(idx, inst->readIntResult());
- } else {
- thread->setMiscRegNoEffect(idx, inst->readIntResult());
+ // We've already popped one dest off the queue,
+ // so do the fix-up then start with the next dest reg;
+ if (start_idx >= 0) {
+ RegIndex idx = inst->destRegIdx(start_idx);
+ if (idx < TheISA::FP_Base_DepTag) {
+ thread->setIntReg(idx, mismatch_val);
+ } else if (idx < TheISA::Ctrl_Base_DepTag) {
+ thread->setFloatRegBits(idx, mismatch_val);
+ } else if (idx < TheISA::Max_DepTag) {
+ thread->setMiscReg(idx - TheISA::Ctrl_Base_DepTag,
+ mismatch_val);
+ }
+ }
+ start_idx++;
+ uint64_t res = 0;
+ for (int i = start_idx; i < inst->numDestRegs(); i++) {
+ RegIndex idx = inst->destRegIdx(i);
+ inst->template popResult<uint64_t>(res);
+ if (idx < TheISA::FP_Base_DepTag) {
+ thread->setIntReg(idx, res);
+ } else if (idx < TheISA::Ctrl_Base_DepTag) {
+ thread->setFloatRegBits(idx, res);
+ } else if (idx < TheISA::Max_DepTag) {
+ // Try to get the proper misc register index for ARM here...
+ thread->setMiscReg(idx - TheISA::Ctrl_Base_DepTag, res);
+ } // else Register is out of range...
}
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::dumpAndExit(DynInstPtr &inst)
+Checker<Impl>::dumpAndExit(DynInstPtr &inst)
{
cprintf("Error detected, instruction information:\n");
- cprintf("PC:%#x, nextPC:%#x\n[sn:%lli]\n[tid:%i]\n"
+ cprintf("PC:%s, nextPC:%#x\n[sn:%lli]\n[tid:%i]\n"
"Completed:%i\n",
- inst->readPC(),
- inst->readNextPC(),
+ inst->pcState(),
+ inst->nextInstAddr(),
inst->seqNum,
inst->threadNumber,
inst->isCompleted());
CheckerCPU::dumpAndExit();
}
-template <class DynInstPtr>
+template <class Impl>
void
-Checker<DynInstPtr>::dumpInsts()
+Checker<Impl>::dumpInsts()
{
int num = 0;
cprintf("Instruction:%i\n",
num);
- cprintf("PC:%#x\n[sn:%lli]\n[tid:%i]\n"
+ cprintf("PC:%s\n[sn:%lli]\n[tid:%i]\n"
"Completed:%i\n",
- (*inst_list_it)->readPC(),
+ (*inst_list_it)->pcState(),
(*inst_list_it)->seqNum,
(*inst_list_it)->threadNumber,
(*inst_list_it)->isCompleted());