/*
- * Copyright (c) 2006 The Regents of The University of Michigan
+ * Copyright (c) 2002-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Authors: Kevin Lim
*/
-#ifndef __CPU_EXEC_CONTEXT_HH__
-#define __CPU_EXEC_CONTEXT_HH__
-
-#include "config/full_system.hh"
-#include "mem/request.hh"
-#include "sim/faults.hh"
-#include "sim/host.hh"
-#include "sim/serialize.hh"
-#include "sim/byteswap.hh"
-
-// @todo: Figure out a more architecture independent way to obtain the ITB and
-// DTB pointers.
-class AlphaDTB;
-class AlphaITB;
-class BaseCPU;
-class EndQuiesceEvent;
-class Event;
-class TranslatingPort;
-class FunctionalPort;
-class VirtualPort;
-class Process;
-class System;
-namespace Kernel {
- class Statistics;
-};
-
-class ExecContext
-{
- protected:
- typedef TheISA::RegFile RegFile;
- typedef TheISA::MachInst MachInst;
- typedef TheISA::IntReg IntReg;
- typedef TheISA::FloatReg FloatReg;
- typedef TheISA::FloatRegBits FloatRegBits;
- typedef TheISA::MiscRegFile MiscRegFile;
- typedef TheISA::MiscReg MiscReg;
- public:
- enum Status
- {
- /// Initialized but not running yet. All CPUs start in
- /// this state, but most transition to Active on cycle 1.
- /// In MP or SMT systems, non-primary contexts will stay
- /// in this state until a thread is assigned to them.
- Unallocated,
-
- /// Running. Instructions should be executed only when
- /// the context is in this state.
- Active,
-
- /// Temporarily inactive. Entered while waiting for
- /// synchronization, etc.
- Suspended,
-
- /// Permanently shut down. Entered when target executes
- /// m5exit pseudo-instruction. When all contexts enter
- /// this state, the simulation will terminate.
- Halted
- };
-
- virtual ~ExecContext() { };
-
- virtual BaseCPU *getCpuPtr() = 0;
-
- virtual void setCpuId(int id) = 0;
-
- virtual int readCpuId() = 0;
-
-#if FULL_SYSTEM
- virtual System *getSystemPtr() = 0;
-
- virtual AlphaITB *getITBPtr() = 0;
-
- virtual AlphaDTB * getDTBPtr() = 0;
-
- virtual Kernel::Statistics *getKernelStats() = 0;
-
- virtual FunctionalPort *getPhysPort() = 0;
-
- virtual VirtualPort *getVirtPort(ExecContext *xc = NULL) = 0;
-
- virtual void delVirtPort(VirtualPort *vp) = 0;
-#else
- virtual TranslatingPort *getMemPort() = 0;
-
- virtual Process *getProcessPtr() = 0;
-#endif
-
- virtual Status status() const = 0;
-
- virtual void setStatus(Status new_status) = 0;
-
- /// Set the status to Active. Optional delay indicates number of
- /// cycles to wait before beginning execution.
- virtual void activate(int delay = 1) = 0;
-
- /// Set the status to Suspended.
- virtual void suspend() = 0;
-
- /// Set the status to Unallocated.
- virtual void deallocate() = 0;
-
- /// Set the status to Halted.
- virtual void halt() = 0;
-
-#if FULL_SYSTEM
- virtual void dumpFuncProfile() = 0;
-#endif
-
- virtual void takeOverFrom(ExecContext *old_context) = 0;
-
- virtual void regStats(const std::string &name) = 0;
-
- virtual void serialize(std::ostream &os) = 0;
- virtual void unserialize(Checkpoint *cp, const std::string §ion) = 0;
-
-#if FULL_SYSTEM
- virtual EndQuiesceEvent *getQuiesceEvent() = 0;
-
- // Not necessarily the best location for these...
- // Having an extra function just to read these is obnoxious
- virtual Tick readLastActivate() = 0;
- virtual Tick readLastSuspend() = 0;
-
- virtual void profileClear() = 0;
- virtual void profileSample() = 0;
-#endif
-
- virtual int getThreadNum() = 0;
-
- // Also somewhat obnoxious. Really only used for the TLB fault.
- // However, may be quite useful in SPARC.
- virtual TheISA::MachInst getInst() = 0;
-
- virtual void copyArchRegs(ExecContext *xc) = 0;
-
- virtual void clearArchRegs() = 0;
-
- //
- // New accessors for new decoder.
- //
- virtual uint64_t readIntReg(int reg_idx) = 0;
-
- virtual FloatReg readFloatReg(int reg_idx, int width) = 0;
-
- virtual FloatReg readFloatReg(int reg_idx) = 0;
-
- virtual FloatRegBits readFloatRegBits(int reg_idx, int width) = 0;
-
- virtual FloatRegBits readFloatRegBits(int reg_idx) = 0;
-
- virtual void setIntReg(int reg_idx, uint64_t val) = 0;
-
- virtual void setFloatReg(int reg_idx, FloatReg val, int width) = 0;
-
- virtual void setFloatReg(int reg_idx, FloatReg val) = 0;
-
- virtual void setFloatRegBits(int reg_idx, FloatRegBits val) = 0;
-
- virtual void setFloatRegBits(int reg_idx, FloatRegBits val, int width) = 0;
-
- virtual uint64_t readPC() = 0;
-
- virtual void setPC(uint64_t val) = 0;
-
- virtual uint64_t readNextPC() = 0;
-
- virtual void setNextPC(uint64_t val) = 0;
-
- virtual uint64_t readNextNPC() = 0;
-
- virtual void setNextNPC(uint64_t val) = 0;
-
- virtual MiscReg readMiscReg(int misc_reg) = 0;
-
- virtual MiscReg readMiscRegWithEffect(int misc_reg, Fault &fault) = 0;
-
- virtual Fault setMiscReg(int misc_reg, const MiscReg &val) = 0;
-
- virtual Fault setMiscRegWithEffect(int misc_reg, const MiscReg &val) = 0;
-
- // Also not necessarily the best location for these two. Hopefully will go
- // away once we decide upon where st cond failures goes.
- virtual unsigned readStCondFailures() = 0;
-
- virtual void setStCondFailures(unsigned sc_failures) = 0;
-
-#if FULL_SYSTEM
- virtual bool inPalMode() = 0;
-#endif
-
- // Only really makes sense for old CPU model. Still could be useful though.
- virtual bool misspeculating() = 0;
-
-#if !FULL_SYSTEM
- virtual IntReg getSyscallArg(int i) = 0;
-
- // used to shift args for indirect syscall
- virtual void setSyscallArg(int i, IntReg val) = 0;
-
- virtual void setSyscallReturn(SyscallReturn return_value) = 0;
+#error "Cannot include this file"
-
- // Same with st cond failures.
- virtual Counter readFuncExeInst() = 0;
-#endif
-
- virtual void changeRegFileContext(RegFile::ContextParam param,
- RegFile::ContextVal val) = 0;
-};
-
-template <class XC>
-class ProxyExecContext : public ExecContext
-{
- public:
- ProxyExecContext(XC *actual_xc)
- { actualXC = actual_xc; }
-
- private:
- XC *actualXC;
-
- public:
-
- BaseCPU *getCpuPtr() { return actualXC->getCpuPtr(); }
-
- void setCpuId(int id) { actualXC->setCpuId(id); }
-
- int readCpuId() { return actualXC->readCpuId(); }
+/**
+ * The ExecContext is not a usable class. It is simply here for
+ * documentation purposes. It shows the interface that is used by the
+ * ISA to access and change CPU state.
+ */
+class ExecContext {
+ // The register accessor methods provide the index of the
+ // instruction's operand (e.g., 0 or 1), not the architectural
+ // register index, to simplify the implementation of register
+ // renaming. We find the architectural register index by indexing
+ // into the instruction's own operand index table. Note that a
+ // raw pointer to the StaticInst is provided instead of a
+ // ref-counted StaticInstPtr to reduce overhead. This is fine as
+ // long as these methods don't copy the pointer into any long-term
+ // storage (which is pretty hard to imagine they would have reason
+ // to do).
+
+ /** Reads an integer register. */
+ uint64_t readIntRegOperand(const StaticInst *si, int idx);
+
+ /** Reads a floating point register of a specific width. */
+ FloatReg readFloatRegOperand(const StaticInst *si, int idx, int width);
+
+ /** Reads a floating point register of single register width. */
+ FloatReg readFloatRegOperand(const StaticInst *si, int idx);
+
+ /** Reads a floating point register of a specific width in its
+ * binary format, instead of by value. */
+ FloatRegBits readFloatRegOperandBits(const StaticInst *si, int idx,
+ int width);
+
+ /** Reads a floating point register in its binary format, instead
+ * of by value. */
+ FloatRegBits readFloatRegOperandBits(const StaticInst *si, int idx);
+
+ /** Sets an integer register to a value. */
+ void setIntRegOperand(const StaticInst *si, int idx, uint64_t val);
+
+ /** Sets a floating point register of a specific width to a value. */
+ void setFloatRegOperand(const StaticInst *si, int idx, FloatReg val,
+ int width);
+
+ /** Sets a floating point register of single width to a value. */
+ void setFloatRegOperand(const StaticInst *si, int idx, FloatReg val);
+
+ /** Sets the bits of a floating point register of a specific width
+ * to a binary value. */
+ void setFloatRegOperandBits(const StaticInst *si, int idx,
+ FloatRegBits val, int width);
+
+ /** Sets the bits of a floating point register of single width
+ * to a binary value. */
+ void setFloatRegOperandBits(const StaticInst *si, int idx,
+ FloatRegBits val);
+
+ /** Reads the PC. */
+ uint64_t readPC();
+ /** Reads the NextPC. */
+ uint64_t readNextPC();
+ /** Reads the Next-NextPC. Only for architectures like SPARC or MIPS. */
+ uint64_t readNextNPC();
+
+ /** Sets the PC. */
+ void setPC(uint64_t val);
+ /** Sets the NextPC. */
+ void setNextPC(uint64_t val);
+ /** Sets the Next-NextPC. Only for architectures like SPARC or MIPS. */
+ void setNextNPC(uint64_t val);
+
+ /** Reads a miscellaneous register. */
+ MiscReg readMiscRegNoEffect(int misc_reg);
+
+ /** Reads a miscellaneous register, handling any architectural
+ * side effects due to reading that register. */
+ MiscReg readMiscReg(int misc_reg);
+
+ /** Sets a miscellaneous register. */
+ void setMiscRegNoEffect(int misc_reg, const MiscReg &val);
+
+ /** Sets a miscellaneous register, handling any architectural
+ * side effects due to writing that register. */
+ void setMiscReg(int misc_reg, const MiscReg &val);
+
+ /** Records the effective address of the instruction. Only valid
+ * for memory ops. */
+ void setEA(Addr EA);
+ /** Returns the effective address of the instruction. Only valid
+ * for memory ops. */
+ Addr getEA();
+
+ /** Returns a pointer to the ThreadContext. */
+ ThreadContext *tcBase();
+
+ /** Reads an address, creating a memory request with the given
+ * flags. Stores result of read in data. */
+ template <class T>
+ Fault read(Addr addr, T &data, unsigned flags);
+
+ /** Writes to an address, creating a memory request with the given
+ * flags. Writes data to memory. For store conditionals, returns
+ * the result of the store in res. */
+ template <class T>
+ Fault write(T data, Addr addr, unsigned flags, uint64_t *res);
+
+ /** Prefetches an address, creating a memory request with the
+ * given flags. */
+ void prefetch(Addr addr, unsigned flags);
+
+ /** Hints to the memory system that an address will be written to
+ * soon, with the given size. Creates a memory request with the
+ * given flags. */
+ void writeHint(Addr addr, int size, unsigned flags);
#if FULL_SYSTEM
- System *getSystemPtr() { return actualXC->getSystemPtr(); }
-
- AlphaITB *getITBPtr() { return actualXC->getITBPtr(); }
-
- AlphaDTB *getDTBPtr() { return actualXC->getDTBPtr(); }
-
- Kernel::Statistics *getKernelStats() { return actualXC->getKernelStats(); }
-
- FunctionalPort *getPhysPort() { return actualXC->getPhysPort(); }
-
- VirtualPort *getVirtPort(ExecContext *xc = NULL) { return actualXC->getVirtPort(xc); }
-
- void delVirtPort(VirtualPort *vp) { return actualXC->delVirtPort(vp); }
+ /** Somewhat Alpha-specific function that handles returning from
+ * an error or interrupt. */
+ Fault hwrei();
+
+ /**
+ * Check for special simulator handling of specific PAL calls. If
+ * return value is false, actual PAL call will be suppressed.
+ */
+ bool simPalCheck(int palFunc);
#else
- TranslatingPort *getMemPort() { return actualXC->getMemPort(); }
-
- Process *getProcessPtr() { return actualXC->getProcessPtr(); }
+ /** Executes a syscall specified by the callnum. */
+ void syscall(int64_t callnum);
#endif
-
- Status status() const { return actualXC->status(); }
-
- void setStatus(Status new_status) { actualXC->setStatus(new_status); }
-
- /// Set the status to Active. Optional delay indicates number of
- /// cycles to wait before beginning execution.
- void activate(int delay = 1) { actualXC->activate(delay); }
-
- /// Set the status to Suspended.
- void suspend() { actualXC->suspend(); }
-
- /// Set the status to Unallocated.
- void deallocate() { actualXC->deallocate(); }
-
- /// Set the status to Halted.
- void halt() { actualXC->halt(); }
-
-#if FULL_SYSTEM
- void dumpFuncProfile() { actualXC->dumpFuncProfile(); }
-#endif
-
- void takeOverFrom(ExecContext *oldContext)
- { actualXC->takeOverFrom(oldContext); }
-
- void regStats(const std::string &name) { actualXC->regStats(name); }
-
- void serialize(std::ostream &os) { actualXC->serialize(os); }
- void unserialize(Checkpoint *cp, const std::string §ion)
- { actualXC->unserialize(cp, section); }
-
-#if FULL_SYSTEM
- EndQuiesceEvent *getQuiesceEvent() { return actualXC->getQuiesceEvent(); }
-
- Tick readLastActivate() { return actualXC->readLastActivate(); }
- Tick readLastSuspend() { return actualXC->readLastSuspend(); }
-
- void profileClear() { return actualXC->profileClear(); }
- void profileSample() { return actualXC->profileSample(); }
-#endif
-
- int getThreadNum() { return actualXC->getThreadNum(); }
-
- // @todo: Do I need this?
- MachInst getInst() { return actualXC->getInst(); }
-
- // @todo: Do I need this?
- void copyArchRegs(ExecContext *xc) { actualXC->copyArchRegs(xc); }
-
- void clearArchRegs() { actualXC->clearArchRegs(); }
-
- //
- // New accessors for new decoder.
- //
- uint64_t readIntReg(int reg_idx)
- { return actualXC->readIntReg(reg_idx); }
-
- FloatReg readFloatReg(int reg_idx, int width)
- { return actualXC->readFloatReg(reg_idx, width); }
-
- FloatReg readFloatReg(int reg_idx)
- { return actualXC->readFloatReg(reg_idx); }
-
- FloatRegBits readFloatRegBits(int reg_idx, int width)
- { return actualXC->readFloatRegBits(reg_idx, width); }
-
- FloatRegBits readFloatRegBits(int reg_idx)
- { return actualXC->readFloatRegBits(reg_idx); }
-
- void setIntReg(int reg_idx, uint64_t val)
- { actualXC->setIntReg(reg_idx, val); }
-
- void setFloatReg(int reg_idx, FloatReg val, int width)
- { actualXC->setFloatReg(reg_idx, val, width); }
-
- void setFloatReg(int reg_idx, FloatReg val)
- { actualXC->setFloatReg(reg_idx, val); }
-
- void setFloatRegBits(int reg_idx, FloatRegBits val, int width)
- { actualXC->setFloatRegBits(reg_idx, val, width); }
-
- void setFloatRegBits(int reg_idx, FloatRegBits val)
- { actualXC->setFloatRegBits(reg_idx, val); }
-
- uint64_t readPC() { return actualXC->readPC(); }
-
- void setPC(uint64_t val) { actualXC->setPC(val); }
-
- uint64_t readNextPC() { return actualXC->readNextPC(); }
-
- void setNextPC(uint64_t val) { actualXC->setNextPC(val); }
-
- uint64_t readNextNPC() { return actualXC->readNextNPC(); }
-
- void setNextNPC(uint64_t val) { actualXC->setNextNPC(val); }
-
- MiscReg readMiscReg(int misc_reg)
- { return actualXC->readMiscReg(misc_reg); }
-
- MiscReg readMiscRegWithEffect(int misc_reg, Fault &fault)
- { return actualXC->readMiscRegWithEffect(misc_reg, fault); }
-
- Fault setMiscReg(int misc_reg, const MiscReg &val)
- { return actualXC->setMiscReg(misc_reg, val); }
-
- Fault setMiscRegWithEffect(int misc_reg, const MiscReg &val)
- { return actualXC->setMiscRegWithEffect(misc_reg, val); }
-
- unsigned readStCondFailures()
- { return actualXC->readStCondFailures(); }
-
- void setStCondFailures(unsigned sc_failures)
- { actualXC->setStCondFailures(sc_failures); }
-#if FULL_SYSTEM
- bool inPalMode() { return actualXC->inPalMode(); }
-#endif
-
- // @todo: Fix this!
- bool misspeculating() { return actualXC->misspeculating(); }
-
-#if !FULL_SYSTEM
- IntReg getSyscallArg(int i) { return actualXC->getSyscallArg(i); }
-
- // used to shift args for indirect syscall
- void setSyscallArg(int i, IntReg val)
- { actualXC->setSyscallArg(i, val); }
-
- void setSyscallReturn(SyscallReturn return_value)
- { actualXC->setSyscallReturn(return_value); }
-
-
- Counter readFuncExeInst() { return actualXC->readFuncExeInst(); }
-#endif
-
- void changeRegFileContext(RegFile::ContextParam param,
- RegFile::ContextVal val)
- {
- actualXC->changeRegFileContext(param, val);
- }
};
-
-#endif
projects / gem5.git / blobdiff