ARM: Finish the timing translation when taking a fault.

[gem5.git] / src / dev / uart8250.cc

diff --git a/src/dev/uart8250.cc b/src/dev/uart8250.cc
index 358dda0d8265fb0496ca989cb480ba946218d259..2bbcf2683bb8093e0a0c5457110ed4a3e33a9dbc 100644 (file)
--- a/src/dev/uart8250.cc
+++ b/src/dev/uart8250.cc
@@ -38,25 +38,25 @@
 #include "base/inifile.hh"
 #include "base/str.hh"        // for to_number
 #include "base/trace.hh"
-#include "dev/simconsole.hh"
-#include "dev/uart8250.hh"
+#include "config/the_isa.hh"
 #include "dev/platform.hh"
+#include "dev/terminal.hh"
+#include "dev/uart8250.hh"
 #include "mem/packet.hh"
 #include "mem/packet_access.hh"
-#include "sim/builder.hh"
 
 using namespace std;
 using namespace TheISA;
 
 Uart8250::IntrEvent::IntrEvent(Uart8250 *u, int bit)
-    : Event(&mainEventQueue), uart(u)
+    : uart(u)
 {
     DPRINTF(Uart, "UART Interrupt Event Initilizing\n");
     intrBit = bit;
 }
 
 const char *
-Uart8250::IntrEvent::description()
+Uart8250::IntrEvent::description() const
 {
     return "uart interrupt delay";
 }
@@ -90,22 +90,21 @@ Uart8250::IntrEvent::process()
 void
 Uart8250::IntrEvent::scheduleIntr()
 {
-    static const Tick interval = (Tick)((Clock::Float::s / 2e9) * 450);
+    static const Tick interval = 225 * SimClock::Int::ns;
     DPRINTF(Uart, "Scheduling IER interrupt for %#x, at cycle %lld\n", intrBit,
             curTick + interval);
     if (!scheduled())
-        schedule(curTick + interval);
+        uart->schedule(this, curTick + interval);
     else
-        reschedule(curTick + interval);
+        uart->reschedule(this, curTick + interval);
 }
 
 
-Uart8250::Uart8250(Params *p)
+Uart8250::Uart8250(const Params *p)
     : Uart(p), IER(0), DLAB(0), LCR(0), MCR(0), lastTxInt(0),
       txIntrEvent(this, TX_INT), rxIntrEvent(this, RX_INT)
 {
     pioSize = 8;
-
 }
 
 Tick
@@ -122,8 +121,8 @@ Uart8250::read(PacketPtr pkt)
     switch (daddr) {
         case 0x0:
             if (!(LCR & 0x80)) { // read byte
-                if (cons->dataAvailable())
-                    pkt->set(cons->in());
+                if (term->dataAvailable())
+                    pkt->set(term->in());
                 else {
                     pkt->set((uint8_t)0);
                     // A limited amount of these are ok.
@@ -132,7 +131,7 @@ Uart8250::read(PacketPtr pkt)
                 status &= ~RX_INT;
                 platform->clearConsoleInt();
 
-                if (cons->dataAvailable() && (IER & UART_IER_RDI))
+                if (term->dataAvailable() && (IER & UART_IER_RDI))
                     rxIntrEvent.scheduleIntr();
             } else { // dll divisor latch
                ;
@@ -167,7 +166,7 @@ Uart8250::read(PacketPtr pkt)
             uint8_t lsr;
             lsr = 0;
             // check if there are any bytes to be read
-            if (cons->dataAvailable())
+            if (term->dataAvailable())
                 lsr = UART_LSR_DR;
             lsr |= UART_LSR_TEMT | UART_LSR_THRE;
             pkt->set(lsr);
@@ -203,7 +202,7 @@ Uart8250::write(PacketPtr pkt)
     switch (daddr) {
         case 0x0:
             if (!(LCR & 0x80)) { // write byte
-                cons->out(pkt->get<uint8_t>());
+                term->out(pkt->get<uint8_t>());
                 platform->clearConsoleInt();
                 status &= ~TX_INT;
                 if (UART_IER_THRI & IER)
@@ -218,8 +217,7 @@ Uart8250::write(PacketPtr pkt)
                 if (UART_IER_THRI & IER)
                 {
                     DPRINTF(Uart, "IER: IER_THRI set, scheduling TX intrrupt\n");
-                    if (curTick - lastTxInt >
-                            (Tick)((Clock::Float::s / 2e9) * 450))  {
+                    if (curTick - lastTxInt > 225 * SimClock::Int::ns) {
                         DPRINTF(Uart, "-- Interrupting Immediately... %d,%d\n",
                                 curTick, lastTxInt);
                         txIntrEvent.process();
@@ -233,19 +231,19 @@ Uart8250::write(PacketPtr pkt)
                 {
                     DPRINTF(Uart, "IER: IER_THRI cleared, descheduling TX intrrupt\n");
                     if (txIntrEvent.scheduled())
-                        txIntrEvent.deschedule();
+                        deschedule(txIntrEvent);
                     if (status & TX_INT)
                         platform->clearConsoleInt();
                     status &= ~TX_INT;
                 }
 
-                if ((UART_IER_RDI & IER) && cons->dataAvailable()) {
+                if ((UART_IER_RDI & IER) && term->dataAvailable()) {
                     DPRINTF(Uart, "IER: IER_RDI set, scheduling RX intrrupt\n");
                     rxIntrEvent.scheduleIntr();
                 } else {
                     DPRINTF(Uart, "IER: IER_RDI cleared, descheduling RX intrrupt\n");
                     if (rxIntrEvent.scheduled())
-                        rxIntrEvent.deschedule();
+                        deschedule(rxIntrEvent);
                     if (status & RX_INT)
                         platform->clearConsoleInt();
                     status &= ~RX_INT;
@@ -331,42 +329,13 @@ Uart8250::unserialize(Checkpoint *cp, const std::string &section)
     UNSERIALIZE_SCALAR(rxintrwhen);
     UNSERIALIZE_SCALAR(txintrwhen);
     if (rxintrwhen != 0)
-        rxIntrEvent.schedule(rxintrwhen);
+        schedule(rxIntrEvent, rxintrwhen);
     if (txintrwhen != 0)
-        txIntrEvent.schedule(txintrwhen);
+        schedule(txIntrEvent, txintrwhen);
 }
 
-BEGIN_DECLARE_SIM_OBJECT_PARAMS(Uart8250)
-
-    Param<Addr> pio_addr;
-    Param<Tick> pio_latency;
-    SimObjectParam<Platform *> platform;
-    SimObjectParam<SimConsole *> sim_console;
-    SimObjectParam<System *> system;
-
-END_DECLARE_SIM_OBJECT_PARAMS(Uart8250)
-
-BEGIN_INIT_SIM_OBJECT_PARAMS(Uart8250)
-
-    INIT_PARAM(pio_addr, "Device Address"),
-    INIT_PARAM_DFLT(pio_latency, "Programmed IO latency", 1000),
-    INIT_PARAM(platform, "platform"),
-    INIT_PARAM(sim_console, "The Simulator Console"),
-    INIT_PARAM(system, "system object")
-
-END_INIT_SIM_OBJECT_PARAMS(Uart8250)
-
-CREATE_SIM_OBJECT(Uart8250)
+Uart8250 *
+Uart8250Params::create()
 {
-    Uart8250::Params *p = new Uart8250::Params;
-    p->name = getInstanceName();
-    p->pio_addr = pio_addr;
-    p->pio_delay = pio_latency;
-    p->platform = platform;
-    p->cons = sim_console;
-    p->system = system;
-    return new Uart8250(p);
+    return new Uart8250(this);
 }
-
-REGISTER_SIM_OBJECT("Uart8250", Uart8250)
-