from nmigen import Module, Const, Signal, Array, Cat, Elaboratable
from regfile.regfile import RegFileArray, treereduce
-from scoreboard.fn_unit import IntFnUnit, FPFnUnit, LDFnUnit, STFnUnit
from scoreboard.fu_fu_matrix import FUFUDepMatrix
from scoreboard.fu_reg_matrix import FURegDepMatrix
from scoreboard.global_pending import GlobalPending
from scoreboard.group_picker import GroupPicker
from scoreboard.issue_unit import IntFPIssueUnit, RegDecode
+from scoreboard.shadow import ShadowMatrix, BranchSpeculationRecord
from compalu import ComputationUnitNoDelay
-from alu_hier import ALU
+from alu_hier import ALU, BranchALU
from nmutil.latch import SRLatch
-from random import randint
+from random import randint, seed
+
class CompUnits(Elaboratable):
* :rwid: bit width of register file(s) - both FP and INT
* :n_units: number of ALUs
+
+ Note: bgt unit is returned so that a shadow unit can be created
+ for it
+
"""
self.n_units = n_units
self.rwid = rwid
+ # inputs
self.issue_i = Signal(n_units, reset_less=True)
self.go_rd_i = Signal(n_units, reset_less=True)
self.go_wr_i = Signal(n_units, reset_less=True)
+ self.shadown_i = Signal(n_units, reset_less=True)
+ self.go_die_i = Signal(n_units, reset_less=True)
+
+ # outputs
self.busy_o = Signal(n_units, reset_less=True)
+ self.rd_rel_o = Signal(n_units, reset_less=True)
self.req_rel_o = Signal(n_units, reset_less=True)
+ # in/out register data (note: not register#, actual data)
self.dest_o = Signal(rwid, reset_less=True)
self.src1_data_i = Signal(rwid, reset_less=True)
self.src2_data_i = Signal(rwid, reset_less=True)
+ # Branch ALU and CU
+ self.bgt = BranchALU(self.rwid)
+ self.br1 = ComputationUnitNoDelay(self.rwid, 2, self.bgt)
+
def elaborate(self, platform):
m = Module()
+ comb = m.d.comb
+ sync = m.d.sync
# Int ALUs
add = ALU(self.rwid)
sub = ALU(self.rwid)
- m.submodules.comp1 = comp1 = ComputationUnitNoDelay(self.rwid, 1, add)
- m.submodules.comp2 = comp2 = ComputationUnitNoDelay(self.rwid, 1, sub)
- int_alus = [comp1, comp2]
-
- m.d.comb += comp1.oper_i.eq(Const(0)) # temporary/experiment: op=add
- m.d.comb += comp2.oper_i.eq(Const(1)) # temporary/experiment: op=sub
+ mul = ALU(self.rwid)
+ shf = ALU(self.rwid)
+ bgt = self.bgt
+
+ m.submodules.comp1 = comp1 = ComputationUnitNoDelay(self.rwid, 2, add)
+ m.submodules.comp2 = comp2 = ComputationUnitNoDelay(self.rwid, 2, sub)
+ m.submodules.comp3 = comp3 = ComputationUnitNoDelay(self.rwid, 2, mul)
+ m.submodules.comp4 = comp4 = ComputationUnitNoDelay(self.rwid, 2, shf)
+ m.submodules.br1 = br1 = self.br1
+ int_alus = [comp1, comp2, comp3, comp4, br1]
+
+ comb += comp1.oper_i.eq(Const(0, 2)) # op=add
+ comb += comp2.oper_i.eq(Const(1, 2)) # op=sub
+ comb += comp3.oper_i.eq(Const(2, 2)) # op=mul
+ comb += comp4.oper_i.eq(Const(3, 2)) # op=shf
+ comb += br1.oper_i.eq(Const(0, 2)) # op=bgt
go_rd_l = []
go_wr_l = []
issue_l = []
busy_l = []
req_rel_l = []
+ rd_rel_l = []
+ shadow_l = []
+ godie_l = []
for alu in int_alus:
req_rel_l.append(alu.req_rel_o)
+ rd_rel_l.append(alu.rd_rel_o)
+ shadow_l.append(alu.shadown_i)
+ godie_l.append(alu.go_die_i)
go_wr_l.append(alu.go_wr_i)
go_rd_l.append(alu.go_rd_i)
issue_l.append(alu.issue_i)
busy_l.append(alu.busy_o)
- m.d.comb += self.req_rel_o.eq(Cat(*req_rel_l))
- m.d.comb += self.busy_o.eq(Cat(*busy_l))
- m.d.comb += Cat(*go_wr_l).eq(self.go_wr_i)
- m.d.comb += Cat(*go_rd_l).eq(self.go_rd_i)
- m.d.comb += Cat(*issue_l).eq(self.issue_i)
+ comb += self.rd_rel_o.eq(Cat(*rd_rel_l))
+ comb += self.req_rel_o.eq(Cat(*req_rel_l))
+ comb += self.busy_o.eq(Cat(*busy_l))
+ comb += Cat(*godie_l).eq(self.go_die_i)
+ comb += Cat(*shadow_l).eq(self.shadown_i)
+ comb += Cat(*go_wr_l).eq(self.go_wr_i)
+ comb += Cat(*go_rd_l).eq(self.go_rd_i)
+ comb += Cat(*issue_l).eq(self.issue_i)
# connect data register input/output
# merge (OR) all integer FU / ALU outputs to a single value
# bit of a hack: treereduce needs a list with an item named "dest_o"
dest_o = treereduce(int_alus)
- m.d.comb += self.dest_o.eq(dest_o)
+ comb += self.dest_o.eq(dest_o)
for i, alu in enumerate(int_alus):
- m.d.comb += alu.src1_i.eq(self.src1_data_i)
- m.d.comb += alu.src2_i.eq(self.src2_data_i)
+ comb += alu.src1_i.eq(self.src1_data_i)
+ comb += alu.src2_i.eq(self.src2_data_i)
return m
self.src1_i = Signal(n_regs, reset_less=True) # oper1 R# in
self.src2_i = Signal(n_regs, reset_less=True) # oper2 R# in
+ self.g_int_rd_pend_o = Signal(n_regs, reset_less=True)
+ self.g_int_wr_pend_o = Signal(n_regs, reset_less=True)
+
self.dest_rsel_o = Signal(n_regs, reset_less=True) # dest reg (bot)
self.src1_rsel_o = Signal(n_regs, reset_less=True) # src1 reg (bot)
self.src2_rsel_o = Signal(n_regs, reset_less=True) # src2 reg (bot)
self.req_rel_i = Signal(n_int_alus, reset_less = True)
- self.g_int_rd_pend_o = Signal(n_regs, reset_less=True)
- self.g_int_wr_pend_o = Signal(n_regs, reset_less=True)
self.readable_o = Signal(n_int_alus, reset_less=True)
self.writable_o = Signal(n_int_alus, reset_less=True)
self.req_rel_o = Signal(n_int_alus, reset_less=True)
self.fn_issue_i = Signal(n_int_alus, reset_less=True)
+ # Note: FURegs wr_pend_o is also outputted from here, for use in WaWGrid
+
def elaborate(self, platform):
m = Module()
+ comb = m.d.comb
+ sync = m.d.sync
n_int_fus = self.n_int_alus
intregdeps = FURegDepMatrix(n_int_fus, self.n_regs)
m.submodules.intregdeps = intregdeps
- m.d.comb += self.g_int_rd_pend_o.eq(intregdeps.rd_pend_o)
- m.d.comb += self.g_int_wr_pend_o.eq(intregdeps.wr_pend_o)
+ comb += self.g_int_rd_pend_o.eq(intregdeps.rd_rsel_o)
+ comb += self.g_int_wr_pend_o.eq(intregdeps.wr_rsel_o)
+
+ comb += intregdeps.rd_pend_i.eq(intregdeps.rd_rsel_o)
+ comb += intregdeps.wr_pend_i.eq(intregdeps.wr_rsel_o)
- m.d.sync += intfudeps.rd_pend_i.eq(self.g_int_rd_pend_o)
- m.d.sync += intfudeps.wr_pend_i.eq(self.g_int_wr_pend_o)
+ comb += intfudeps.rd_pend_i.eq(intregdeps.rd_pend_o)
+ comb += intfudeps.wr_pend_i.eq(intregdeps.wr_pend_o)
+ self.wr_pend_o = intregdeps.wr_pend_o # also output for use in WaWGrid
- m.d.comb += intfudeps.issue_i.eq(self.fn_issue_i)
- m.d.comb += intfudeps.go_rd_i.eq(self.go_rd_i)
- m.d.comb += intfudeps.go_wr_i.eq(self.go_wr_i)
- m.d.comb += self.readable_o.eq(intfudeps.readable_o)
- m.d.comb += self.writable_o.eq(intfudeps.writable_o)
+ comb += intfudeps.issue_i.eq(self.fn_issue_i)
+ comb += intfudeps.go_rd_i.eq(self.go_rd_i)
+ comb += intfudeps.go_wr_i.eq(self.go_wr_i)
+ comb += self.readable_o.eq(intfudeps.readable_o)
+ comb += self.writable_o.eq(intfudeps.writable_o)
# Connect function issue / arrays, and dest/src1/src2
- m.d.comb += intregdeps.dest_i.eq(self.dest_i)
- m.d.comb += intregdeps.src1_i.eq(self.src1_i)
- m.d.comb += intregdeps.src2_i.eq(self.src2_i)
+ comb += intregdeps.dest_i.eq(self.dest_i)
+ comb += intregdeps.src1_i.eq(self.src1_i)
+ comb += intregdeps.src2_i.eq(self.src2_i)
- m.d.comb += intregdeps.go_rd_i.eq(self.go_rd_i)
- m.d.comb += intregdeps.go_wr_i.eq(self.go_wr_i)
- m.d.comb += intregdeps.issue_i.eq(self.fn_issue_i)
+ comb += intregdeps.go_rd_i.eq(self.go_rd_i)
+ comb += intregdeps.go_wr_i.eq(self.go_wr_i)
+ comb += intregdeps.issue_i.eq(self.fn_issue_i)
- m.d.comb += self.dest_rsel_o.eq(intregdeps.dest_rsel_o)
- m.d.comb += self.src1_rsel_o.eq(intregdeps.src1_rsel_o)
- m.d.comb += self.src2_rsel_o.eq(intregdeps.src2_rsel_o)
+ comb += self.dest_rsel_o.eq(intregdeps.dest_rsel_o)
+ comb += self.src1_rsel_o.eq(intregdeps.src1_rsel_o)
+ comb += self.src2_rsel_o.eq(intregdeps.src2_rsel_o)
return m
self.int_dest_i = Signal(max=n_regs, reset_less=True) # Dest R# in
self.int_src1_i = Signal(max=n_regs, reset_less=True) # oper1 R# in
self.int_src2_i = Signal(max=n_regs, reset_less=True) # oper2 R# in
+ self.reg_enable_i = Signal(reset_less=True) # enable reg decode
+ # outputs
self.issue_o = Signal(reset_less=True) # instruction was accepted
+ self.busy_o = Signal(reset_less=True) # at least one CU is busy
+
+ # for branch speculation experiment. branch_direction = 0 if
+ # the branch hasn't been met yet. 1 indicates "success", 2 is "fail"
+ # branch_succ and branch_fail are requests to have the current
+ # instruction be dependent on the branch unit "shadow" capability.
+ self.branch_succ_i = Signal(reset_less=True)
+ self.branch_fail_i = Signal(reset_less=True)
+ self.branch_direction_o = Signal(2, reset_less=True)
def elaborate(self, platform):
m = Module()
+ comb = m.d.comb
+ sync = m.d.sync
m.submodules.intregs = self.intregs
m.submodules.fpregs = self.fpregs
fp_src2 = self.fpregs.read_port("src2")
# Int ALUs and Comp Units
- n_int_alus = 2
+ n_int_alus = 5
m.submodules.cu = cu = CompUnits(self.rwid, n_int_alus)
+ comb += cu.go_die_i.eq(0)
+ bgt = cu.bgt # get at the branch computation unit
# Int FUs
m.submodules.intfus = intfus = FunctionUnits(self.n_regs, n_int_alus)
n_fp_fus = 0 # for now
# Integer Priority Picker 1: Adder + Subtractor
- intpick1 = GroupPicker(2) # picks between add and sub
+ intpick1 = GroupPicker(n_int_fus) # picks between add, sub, mul and shf
m.submodules.intpick1 = intpick1
# INT/FP Issue Unit
issueunit = IntFPIssueUnit(self.n_regs, n_int_fus, n_fp_fus)
m.submodules.issueunit = issueunit
+ # Shadow Matrix. currently n_int_fus shadows, to be used for
+ # write-after-write hazards. NOTE: there is one extra for branches,
+ # so the shadow width is increased by 1
+ m.submodules.shadows = shadows = ShadowMatrix(n_int_fus, n_int_fus)
+ m.submodules.bshadow = bshadow = ShadowMatrix(n_int_fus, 1)
+
+ # combined go_rd/wr + go_die (go_die used to reset latches)
+ go_rd_rst = Signal(n_int_fus, reset_less=True)
+ go_wr_rst = Signal(n_int_fus, reset_less=True)
+ # record previous instruction to cast shadow on current instruction
+ fn_issue_prev = Signal(n_int_fus)
+ prev_shadow = Signal(n_int_fus)
+
+ # Branch Speculation recorder. tracks the success/fail state as
+ # each instruction is issued, so that when the branch occurs the
+ # allow/cancel can be issued as appropriate.
+ m.submodules.specrec = bspec = BranchSpeculationRecord(n_int_fus)
+
#---------
# ok start wiring things together...
# "now hear de word of de looord... dem bones dem bones dem dryy bones"
#---------
# Issue Unit is where it starts. set up some in/outs for this module
#---------
- m.d.comb += [issueunit.i.store_i.eq(self.int_store_i),
+ comb += [issueunit.i.store_i.eq(self.int_store_i),
regdecode.dest_i.eq(self.int_dest_i),
regdecode.src1_i.eq(self.int_src1_i),
regdecode.src2_i.eq(self.int_src2_i),
- regdecode.enable_i.eq(1),
+ regdecode.enable_i.eq(self.reg_enable_i),
issueunit.i.dest_i.eq(regdecode.dest_o),
self.issue_o.eq(issueunit.issue_o)
]
self.int_insn_i = issueunit.i.insn_i # enabled by instruction decode
- # connect global rd/wr pending vectors
- m.d.comb += issueunit.i.g_wr_pend_i.eq(intfus.g_int_wr_pend_o)
+ # connect global rd/wr pending vector (for WaW detection)
+ sync += issueunit.i.g_wr_pend_i.eq(intfus.g_int_wr_pend_o)
# TODO: issueunit.f (FP)
# and int function issue / busy arrays, and dest/src1/src2
- m.d.comb += intfus.dest_i.eq(regdecode.dest_o)
- m.d.comb += intfus.src1_i.eq(regdecode.src1_o)
- m.d.comb += intfus.src2_i.eq(regdecode.src2_o)
+ comb += intfus.dest_i.eq(regdecode.dest_o)
+ comb += intfus.src1_i.eq(regdecode.src1_o)
+ comb += intfus.src2_i.eq(regdecode.src2_o)
fn_issue_o = issueunit.i.fn_issue_o
- m.d.comb += intfus.fn_issue_i.eq(fn_issue_o)
- # XXX sync, so as to stop a simulation infinite loop
- m.d.sync += issueunit.i.busy_i.eq(cu.busy_o)
+ comb += intfus.fn_issue_i.eq(fn_issue_o)
+ comb += issueunit.i.busy_i.eq(cu.busy_o)
+ comb += self.busy_o.eq(cu.busy_o.bool())
#---------
# connect fu-fu matrix
#---------
- # Group Picker... done manually for now. TODO: cat array of pick sigs
+ # Group Picker... done manually for now.
go_rd_o = intpick1.go_rd_o
go_wr_o = intpick1.go_wr_o
go_rd_i = intfus.go_rd_i
go_wr_i = intfus.go_wr_i
- m.d.comb += go_rd_i[0:2].eq(go_rd_o[0:2]) # add rd
- m.d.comb += go_wr_i[0:2].eq(go_wr_o[0:2]) # add wr
+ # NOTE: connect to the shadowed versions so that they can "die" (reset)
+ comb += go_rd_i[0:n_int_fus].eq(go_rd_rst[0:n_int_fus]) # rd
+ comb += go_wr_i[0:n_int_fus].eq(go_wr_rst[0:n_int_fus]) # wr
# Connect Picker
#---------
- m.d.comb += intpick1.req_rel_i[0:2].eq(cu.req_rel_o[0:2])
- int_readable_o = intfus.readable_o
- int_writable_o = intfus.writable_o
- m.d.comb += intpick1.readable_i[0:2].eq(int_readable_o[0:2])
- m.d.comb += intpick1.writable_i[0:2].eq(int_writable_o[0:2])
+ comb += intpick1.rd_rel_i[0:n_int_fus].eq(cu.rd_rel_o[0:n_int_fus])
+ comb += intpick1.req_rel_i[0:n_int_fus].eq(cu.req_rel_o[0:n_int_fus])
+ int_rd_o = intfus.readable_o
+ int_wr_o = intfus.writable_o
+ comb += intpick1.readable_i[0:n_int_fus].eq(int_rd_o[0:n_int_fus])
+ comb += intpick1.writable_i[0:n_int_fus].eq(int_wr_o[0:n_int_fus])
+
+ #---------
+ # Shadow Matrix
+ #---------
+
+ comb += shadows.issue_i.eq(fn_issue_o)
+ # these are explained in ShadowMatrix docstring, and are to be
+ # connected to the FUReg and FUFU Matrices, to get them to reset
+ # NOTE: do NOT connect these to the Computation Units. The CUs need to
+ # do something slightly different (due to the revolving-door SRLatches)
+ anydie = Signal(n_int_fus, reset_less=True)
+ allshadown = Signal(n_int_fus, reset_less=True)
+ comb += allshadown.eq(shadows.shadown_o & bshadow.shadown_o)
+ comb += anydie.eq(shadows.go_die_o | bshadow.go_die_o)
+ comb += go_rd_rst.eq(go_rd_o | anydie)
+ comb += go_wr_rst.eq(go_wr_o | anydie)
+
+ #---------
+ # NOTE; this setup is for the instruction order preservation...
+
+ # connect shadows / go_dies to Computation Units
+ comb += cu.shadown_i[0:n_int_fus].eq(allshadown)
+ comb += cu.go_die_i[0:n_int_fus].eq(anydie)
+
+ # ok connect first n_int_fu shadows to busy lines, to create an
+ # instruction-order linked-list-like arrangement, using a bit-matrix
+ # (instead of e.g. a ring buffer).
+ # XXX TODO
+
+ # when written, the shadow can be cancelled (and was good)
+ for i in range(n_int_fus):
+ comb += shadows.s_good_i[i][0:n_int_fus].eq(go_wr_o[0:n_int_fus])
+
+ # work out the current-activated busy unit (by recording the old one)
+ with m.If(fn_issue_o): # only update prev bit if instruction issued
+ sync += fn_issue_prev.eq(fn_issue_o)
+
+ # *previous* instruction shadows *current* instruction, and, obviously,
+ # if the previous is completed (!busy) don't cast the shadow!
+ comb += prev_shadow.eq(~fn_issue_o & fn_issue_prev & cu.busy_o)
+ for i in range(n_int_fus):
+ comb += shadows.shadow_i[i][0:n_int_fus].eq(prev_shadow)
+
+ #---------
+ # ... and this is for branch speculation. it uses the extra bit
+ # tacked onto the ShadowMatrix (hence shadow_wid=n_int_fus+1)
+ # only needs to set shadow_i, s_fail_i and s_good_i
+
+ # issue captures shadow_i (if enabled)
+ comb += bshadow.issue_i.eq(fn_issue_o)
+
+ # instruction being issued (fn_issue_o) has a shadow cast by the branch
+ with m.If(self.branch_succ_i | self.branch_fail_i):
+ comb += bshadow.shadow_i[fn_issue_o][0].eq(1)
+
+ # finally, we need an indicator to the test infrastructure as to
+ # whether the branch succeeded or failed, plus, link up to the
+ # "recorder" of whether the instruction was under shadow or not
+
+ with m.If(cu.br1.issue_i):
+ sync += bspec.active_i.eq(1)
+ with m.If(self.branch_succ_i):
+ comb += bspec.good_i.eq(fn_issue_o & 0xf)
+ with m.If(self.branch_fail_i):
+ comb += bspec.fail_i.eq(fn_issue_o & 0xf)
+
+ # branch is active (TODO: a better signal: this is over-using the
+ # go_write signal - actually the branch should not be "writing")
+ with m.If(cu.br1.go_wr_i):
+ sync += self.branch_direction_o.eq(cu.br1.data_o+Const(1, 2))
+ sync += bspec.active_i.eq(0)
+ comb += bspec.br_i.eq(1)
+ # branch occurs if data == 1, failed if data == 0
+ comb += bspec.br_ok_i.eq(cu.br1.data_o == 1)
+ for i in range(n_int_fus):
+ # *expected* direction of the branch matched against *actual*
+ comb += bshadow.s_good_i[i][0].eq(bspec.match_g_o[i])
+ # ... or it didn't
+ comb += bshadow.s_fail_i[i][0].eq(bspec.match_f_o[i])
#---------
# Connect Register File(s)
#---------
print ("intregdeps wen len", len(intfus.dest_rsel_o))
- m.d.sync += int_dest.wen.eq(intfus.dest_rsel_o)
- m.d.comb += int_src1.ren.eq(intfus.src1_rsel_o)
- m.d.comb += int_src2.ren.eq(intfus.src2_rsel_o)
+ comb += int_dest.wen.eq(intfus.dest_rsel_o)
+ comb += int_src1.ren.eq(intfus.src1_rsel_o)
+ comb += int_src2.ren.eq(intfus.src2_rsel_o)
# connect ALUs to regfule
- m.d.comb += int_dest.data_i.eq(cu.dest_o)
- m.d.comb += cu.src1_data_i.eq(int_src1.data_o)
- m.d.comb += cu.src2_data_i.eq(int_src2.data_o)
+ comb += int_dest.data_i.eq(cu.dest_o)
+ comb += cu.src1_data_i.eq(int_src1.data_o)
+ comb += cu.src2_data_i.eq(int_src2.data_o)
# connect ALU Computation Units
- m.d.sync += cu.go_rd_i[0:2].eq(go_rd_o[0:2])
- m.d.sync += cu.go_wr_i[0:2].eq(go_wr_o[0:2])
- m.d.sync += cu.issue_i[0:2].eq(fn_issue_o[0:2])
+ comb += cu.go_rd_i[0:n_int_fus].eq(go_rd_o[0:n_int_fus])
+ comb += cu.go_wr_i[0:n_int_fus].eq(go_wr_o[0:n_int_fus])
+ comb += cu.issue_i[0:n_int_fus].eq(fn_issue_o[0:n_int_fus])
return m
yield self.int_src1_i
yield self.int_src2_i
yield self.issue_o
- #yield from self.int_src1
- #yield from self.int_dest
- #yield from self.int_src1
- #yield from self.int_src2
- #yield from self.fp_dest
- #yield from self.fp_src1
- #yield from self.fp_src2
+ yield self.branch_succ_i
+ yield self.branch_fail_i
+ yield self.branch_direction_o
def ports(self):
return list(self)
IADD = 0
ISUB = 1
+IMUL = 2
+ISHF = 3
+IBGT = 4
+IBLT = 5
+IBEQ = 6
+IBNE = 7
class RegSim:
def __init__(self, rwidth, nregs):
self.regs = [0] * nregs
def op(self, op, src1, src2, dest):
- src1 = self.regs[src1]
- src2 = self.regs[src2]
+ maxbits = (1 << self.rwidth) - 1
+ src1 = self.regs[src1] & maxbits
+ src2 = self.regs[src2] & maxbits
if op == IADD:
- val = (src1 + src2) & ((1<<(self.rwidth))-1)
+ val = src1 + src2
elif op == ISUB:
- val = (src1 - src2) & ((1<<(self.rwidth))-1)
+ val = src1 - src2
+ elif op == IMUL:
+ val = src1 * src2
+ elif op == ISHF:
+ val = src1 >> (src2 & maxbits)
+ elif op == IBGT:
+ val = int(src1 > src2)
+ elif op == IBLT:
+ val = int(src1 < src2)
+ elif op == IBEQ:
+ val = int(src1 == src2)
+ elif op == IBNE:
+ val = int(src1 != src2)
+ val &= maxbits
self.regs[dest] = val
def setval(self, dest, val):
yield from self.dump(dut)
assert False
-def int_instr(dut, alusim, op, src1, src2, dest):
+def int_instr(dut, op, src1, src2, dest, branch_success, branch_fail):
for i in range(len(dut.int_insn_i)):
yield dut.int_insn_i[i].eq(0)
yield dut.int_dest_i.eq(dest)
yield dut.int_src1_i.eq(src1)
yield dut.int_src2_i.eq(src2)
yield dut.int_insn_i[op].eq(1)
- alusim.op(op, src1, src2, dest)
+ yield dut.reg_enable_i.eq(1)
+
+ # these indicate that the instruction is to be made shadow-dependent on
+ # (either) branch success or branch fail
+ yield dut.branch_fail_i.eq(branch_fail)
+ yield dut.branch_succ_i.eq(branch_success)
def print_reg(dut, rnums):
print ("reg %s: %s" % (','.join(rnums), ','.join(rs)))
-def scoreboard_sim(dut, alusim):
- yield dut.int_store_i.eq(0)
+def create_random_ops(dut, n_ops, shadowing=False, max_opnums=3):
+ insts = []
+ for i in range(n_ops):
+ src1 = randint(1, dut.n_regs-1)
+ src2 = randint(1, dut.n_regs-1)
+ dest = randint(1, dut.n_regs-1)
+ op = randint(0, max_opnums)
- for i in range(1, dut.n_regs):
- yield dut.intregs.regs[i].reg.eq(i*2)
- alusim.setval(i, i*2)
+ if shadowing:
+ insts.append((src1, src2, dest, op, (0, 0)))
+ else:
+ insts.append((src1, src2, dest, op))
+ return insts
- if False:
- yield from int_instr(dut, alusim, IADD, 4, 3, 5)
- yield from print_reg(dut, [3,4,5])
- yield
- yield from int_instr(dut, alusim, IADD, 5, 2, 5)
- yield from print_reg(dut, [3,4,5])
- yield
- yield from int_instr(dut, alusim, ISUB, 5, 1, 3)
- yield from print_reg(dut, [3,4,5])
- yield
- for i in range(len(dut.int_insn_i)):
- yield dut.int_insn_i[i].eq(0)
- yield from print_reg(dut, [3,4,5])
- yield
- yield from print_reg(dut, [3,4,5])
- yield
- yield from print_reg(dut, [3,4,5])
+
+def wait_for_busy_clear(dut):
+ while True:
+ busy_o = yield dut.busy_o
+ if not busy_o:
+ break
+ print ("busy",)
yield
- yield from alusim.check(dut)
- for i in range(5):
- src1 = randint(1, dut.n_regs-1)
- src2 = randint(1, dut.n_regs-1)
- while True:
- dest = randint(1, dut.n_regs-1)
+def wait_for_issue(dut):
+ while True:
+ issue_o = yield dut.issue_o
+ if issue_o:
+ for i in range(len(dut.int_insn_i)):
+ yield dut.int_insn_i[i].eq(0)
+ yield dut.reg_enable_i.eq(0)
break
- if dest not in [src1, src2]:
- break
- #src1 = 7
- #src2 = 4
- #dest = 2
-
- op = randint(0, 1)
- op = 0
- print ("random %d: %d %d %d %d\n" % (i, op, src1, src2, dest))
- yield from int_instr(dut, alusim, op, src1, src2, dest)
- yield from print_reg(dut, [3,4,5])
- yield
- yield from print_reg(dut, [3,4,5])
- for i in range(len(dut.int_insn_i)):
- yield dut.int_insn_i[i].eq(0)
- yield
+ #print ("busy",)
+ #yield from print_reg(dut, [1,2,3])
yield
+ #yield from print_reg(dut, [1,2,3])
+
+def scoreboard_branch_sim(dut, alusim):
+
+ seed(0)
+ yield dut.int_store_i.eq(1)
- yield
- yield from print_reg(dut, [3,4,5])
- yield
- yield from print_reg(dut, [3,4,5])
- yield
- yield
- yield
- yield
- yield from alusim.check(dut)
- yield from alusim.dump(dut)
+ for i in range(2):
+ # set random values in the registers
+ for i in range(1, dut.n_regs):
+ val = 31+i*3
+ val = randint(0, (1<<alusim.rwidth)-1)
+ yield dut.intregs.regs[i].reg.eq(val)
+ alusim.setval(i, val)
+
+ # create some instructions: branches create a tree
+ insts = create_random_ops(dut, 1, True)
+
+ src1 = randint(1, dut.n_regs-1)
+ src2 = randint(1, dut.n_regs-1)
+ #op = randint(4, 7)
+ op = 4 # only BGT at the moment
+
+ branch_ok = create_random_ops(dut, 1, True)
+ branch_fail = create_random_ops(dut, 1, True)
+
+ insts.append((src1, src2, (branch_ok, branch_fail), op, (0, 0)))
+
+ # issue instruction(s)
+ i = -1
+ instrs = insts
+ branch_direction = 0
+ while instrs:
+ i += 1
+ (src1, src2, dest, op, (shadow_on, shadow_off)) = insts.pop()
+ if branch_direction == 1 and shadow_off:
+ continue # branch was "success" and this is a "failed"... skip
+ if branch_direction == 2 and shadow_on:
+ continue # branch was "fail" and this is a "success"... skip
+ is_branch = op >= 4
+ if is_branch:
+ branch_ok, branch_fail = dest
+ dest = -1
+ # ok zip up the branch success / fail instructions and
+ # drop them into the queue, one marked "to have branch success"
+ # the other to be marked shadow branch "fail".
+ # one out of each of these will be cancelled
+ for ok, fl in zip(branch_ok, branch_fail):
+ instrs.append((ok[0], ok[1], ok[2], ok[3], (1, 0)))
+ instrs.append((fl[0], fl[1], fl[2], fl[3], (0, 1)))
+ print ("instr %d: (%d, %d, %d, %d)" % (i, src1, src2, dest, op))
+ yield from int_instr(dut, op, src1, src2, dest,
+ shadow_on, shadow_off)
+ yield
+ yield from wait_for_issue(dut)
+ branch_direction = yield dut.branch_direction_o # way branch went
+
+ # wait for all instructions to stop before checking
+ yield
+ yield from wait_for_busy_clear(dut)
+
+ for (src1, src2, dest, op, (shadow_on, shadow_off)) in insts:
+ is_branch = op >= 4
+ if is_branch:
+ branch_ok, branch_fail = dest
+ dest = None
+ branch_res = alusim.op(op, src1, src2, dest)
+ if is_branch:
+ if branch_res:
+ insts.append(branch_ok)
+ else:
+ insts.append(branch_fail)
+
+ # check status
+ yield from alusim.check(dut)
+ yield from alusim.dump(dut)
-def explore_groups(dut):
- from nmigen.hdl.ir import Fragment
- from nmigen.hdl.xfrm import LHSGroupAnalyzer
- fragment = dut.elaborate(platform=None)
- fr = Fragment.get(fragment, platform=None)
+def scoreboard_sim(dut, alusim):
- groups = LHSGroupAnalyzer()(fragment._statements)
+ yield dut.int_store_i.eq(1)
+
+ for i in range(1):
+
+ # set random values in the registers
+ for i in range(1, dut.n_regs):
+ val = 31+i*3
+ val = randint(0, (1<<alusim.rwidth)-1)
+ yield dut.intregs.regs[i].reg.eq(val)
+ alusim.setval(i, val)
+
+ # create some instructions (some random, some regression tests)
+ instrs = []
+ if True:
+ instrs = create_random_ops(dut, 10, True, 4)
+
+ if False:
+ instrs.append((2, 3, 3, 0))
+ instrs.append((5, 3, 3, 1))
+
+ if False:
+ instrs.append((5, 6, 2, 1))
+ instrs.append((2, 2, 4, 0))
+ #instrs.append((2, 2, 3, 1))
+
+ if False:
+ instrs.append((2, 1, 2, 3))
+
+ if False:
+ instrs.append((2, 6, 2, 1))
+ instrs.append((2, 1, 2, 0))
+
+ if False:
+ instrs.append((1, 2, 7, 2))
+ instrs.append((7, 1, 5, 0))
+ instrs.append((4, 4, 1, 1))
+
+ if False:
+ instrs.append((5, 6, 2, 2))
+ instrs.append((1, 1, 4, 1))
+ instrs.append((6, 5, 3, 0))
+
+ if False:
+ # Write-after-Write Hazard
+ instrs.append( (3, 6, 7, 2) )
+ instrs.append( (4, 4, 7, 1) )
+
+ if False:
+ # self-read/write-after-write followed by Read-after-Write
+ instrs.append((1, 1, 1, 1))
+ instrs.append((1, 5, 3, 0))
+
+ if False:
+ # Read-after-Write followed by self-read-after-write
+ instrs.append((5, 6, 1, 2))
+ instrs.append((1, 1, 1, 1))
+
+ if False:
+ # self-read-write sandwich
+ instrs.append((5, 6, 1, 2))
+ instrs.append((1, 1, 1, 1))
+ instrs.append((1, 5, 3, 0))
+
+ if False:
+ # very weird failure
+ instrs.append( (5, 2, 5, 2) )
+ instrs.append( (2, 6, 3, 0) )
+ instrs.append( (4, 2, 2, 1) )
+
+ if False:
+ v1 = 4
+ yield dut.intregs.regs[5].reg.eq(v1)
+ alusim.setval(5, v1)
+ yield dut.intregs.regs[3].reg.eq(5)
+ alusim.setval(3, 5)
+ instrs.append((5, 3, 3, 4, (0, 0)))
+ instrs.append((4, 2, 1, 2, (0, 1)))
+
+ if False:
+ v1 = 6
+ yield dut.intregs.regs[5].reg.eq(v1)
+ alusim.setval(5, v1)
+ yield dut.intregs.regs[3].reg.eq(5)
+ alusim.setval(3, 5)
+ instrs.append((5, 3, 3, 4, (0, 0)))
+ instrs.append((4, 2, 1, 2, (1, 0)))
+
+ # issue instruction(s), wait for issue to be free before proceeding
+ for i, (src1, src2, dest, op, (br_ok, br_fail)) in enumerate(instrs):
+
+ print ("instr %d: (%d, %d, %d, %d)" % (i, src1, src2, dest, op))
+ alusim.op(op, src1, src2, dest)
+ yield from int_instr(dut, op, src1, src2, dest, br_ok, br_fail)
+ yield
+ yield from wait_for_issue(dut)
+
+ # wait for all instructions to stop before checking
+ yield
+ yield from wait_for_busy_clear(dut)
- print (groups)
+ # check status
+ yield from alusim.check(dut)
+ yield from alusim.dump(dut)
def test_scoreboard():
- dut = Scoreboard(32, 8)
- alusim = RegSim(32, 8)
+ dut = Scoreboard(16, 8)
+ alusim = RegSim(16, 8)
vl = rtlil.convert(dut, ports=dut.ports())
with open("test_scoreboard6600.il", "w") as f:
f.write(vl)
- run_simulation(dut, scoreboard_sim(dut, alusim),
+ #run_simulation(dut, scoreboard_sim(dut, alusim),
+ # vcd_name='test_scoreboard6600.vcd')
+
+ run_simulation(dut, scoreboard_branch_sim(dut, alusim),
vcd_name='test_scoreboard6600.vcd')