#include "util/bitset.h"
#include "ir3.h"
-#include "ir3_compiler.h"
+#include "ir3_shader.h"
+#include "ir3_ra.h"
+
+
+#ifdef DEBUG
+#define RA_DEBUG (ir3_shader_debug & IR3_DBG_RAMSGS)
+#else
+#define RA_DEBUG 0
+#endif
+#define d(fmt, ...) do { if (RA_DEBUG) { \
+ printf("RA: "fmt"\n", ##__VA_ARGS__); \
+} } while (0)
+
+#define di(instr, fmt, ...) do { if (RA_DEBUG) { \
+ printf("RA: "fmt": ", ##__VA_ARGS__); \
+ ir3_print_instr(instr); \
+} } while (0)
/*
* Register Assignment:
* the result.
*/
-static const unsigned class_sizes[] = {
- 1, 2, 3, 4,
- 4 + 4, /* txd + 1d/2d */
- 4 + 6, /* txd + 3d */
-};
-#define class_count ARRAY_SIZE(class_sizes)
-
-static const unsigned half_class_sizes[] = {
- 1, 2, 3, 4,
-};
-#define half_class_count ARRAY_SIZE(half_class_sizes)
-
-/* seems to just be used for compute shaders? Seems like vec1 and vec3
- * are sufficient (for now?)
- */
-static const unsigned high_class_sizes[] = {
- 1, 3,
-};
-#define high_class_count ARRAY_SIZE(high_class_sizes)
-
-#define total_class_count (class_count + half_class_count + high_class_count)
-
-/* Below a0.x are normal regs. RA doesn't need to assign a0.x/p0.x. */
-#define NUM_REGS (4 * 48) /* r0 to r47 */
-#define NUM_HIGH_REGS (4 * 8) /* r48 to r55 */
-#define FIRST_HIGH_REG (4 * 48)
-/* Number of virtual regs in a given class: */
-#define CLASS_REGS(i) (NUM_REGS - (class_sizes[i] - 1))
-#define HALF_CLASS_REGS(i) (NUM_REGS - (half_class_sizes[i] - 1))
-#define HIGH_CLASS_REGS(i) (NUM_HIGH_REGS - (high_class_sizes[i] - 1))
-
-#define HALF_OFFSET (class_count)
-#define HIGH_OFFSET (class_count + half_class_count)
-
-/* register-set, created one time, used for all shaders: */
-struct ir3_ra_reg_set {
- struct ra_regs *regs;
- unsigned int classes[class_count];
- unsigned int half_classes[half_class_count];
- unsigned int high_classes[high_class_count];
- /* maps flat virtual register space to base gpr: */
- uint16_t *ra_reg_to_gpr;
- /* maps cls,gpr to flat virtual register space: */
- uint16_t **gpr_to_ra_reg;
-};
-
-static void
-build_q_values(unsigned int **q_values, unsigned off,
- const unsigned *sizes, unsigned count)
-{
- for (unsigned i = 0; i < count; i++) {
- q_values[i + off] = rzalloc_array(q_values, unsigned, total_class_count);
-
- /* From register_allocate.c:
- *
- * q(B,C) (indexed by C, B is this register class) in
- * Runeson/Nyström paper. This is "how many registers of B could
- * the worst choice register from C conflict with".
- *
- * If we just let the register allocation algorithm compute these
- * values, is extremely expensive. However, since all of our
- * registers are laid out, we can very easily compute them
- * ourselves. View the register from C as fixed starting at GRF n
- * somewhere in the middle, and the register from B as sliding back
- * and forth. Then the first register to conflict from B is the
- * one starting at n - class_size[B] + 1 and the last register to
- * conflict will start at n + class_size[B] - 1. Therefore, the
- * number of conflicts from B is class_size[B] + class_size[C] - 1.
- *
- * +-+-+-+-+-+-+ +-+-+-+-+-+-+
- * B | | | | | |n| --> | | | | | | |
- * +-+-+-+-+-+-+ +-+-+-+-+-+-+
- * +-+-+-+-+-+
- * C |n| | | | |
- * +-+-+-+-+-+
- *
- * (Idea copied from brw_fs_reg_allocate.cpp)
- */
- for (unsigned j = 0; j < count; j++)
- q_values[i + off][j + off] = sizes[i] + sizes[j] - 1;
- }
-}
-
-/* One-time setup of RA register-set, which describes all the possible
- * "virtual" registers and their interferences. Ie. double register
- * occupies (and conflicts with) two single registers, and so forth.
- * Since registers do not need to be aligned to their class size, they
- * can conflict with other registers in the same class too. Ie:
- *
- * Single (base) | Double
- * --------------+---------------
- * R0 | D0
- * R1 | D0 D1
- * R2 | D1 D2
- * R3 | D2
- * .. and so on..
- *
- * (NOTE the disassembler uses notation like r0.x/y/z/w but those are
- * really just four scalar registers. Don't let that confuse you.)
- */
-struct ir3_ra_reg_set *
-ir3_ra_alloc_reg_set(struct ir3_compiler *compiler)
-{
- struct ir3_ra_reg_set *set = rzalloc(compiler, struct ir3_ra_reg_set);
- unsigned ra_reg_count, reg, first_half_reg, first_high_reg, base;
- unsigned int **q_values;
-
- /* calculate # of regs across all classes: */
- ra_reg_count = 0;
- for (unsigned i = 0; i < class_count; i++)
- ra_reg_count += CLASS_REGS(i);
- for (unsigned i = 0; i < half_class_count; i++)
- ra_reg_count += HALF_CLASS_REGS(i);
- for (unsigned i = 0; i < high_class_count; i++)
- ra_reg_count += HIGH_CLASS_REGS(i);
- /* allocate and populate q_values: */
- q_values = ralloc_array(set, unsigned *, total_class_count);
+static struct ir3_instruction * name_to_instr(struct ir3_ra_ctx *ctx, unsigned name);
- build_q_values(q_values, 0, class_sizes, class_count);
- build_q_values(q_values, HALF_OFFSET, half_class_sizes, half_class_count);
- build_q_values(q_values, HIGH_OFFSET, high_class_sizes, high_class_count);
-
- /* allocate the reg-set.. */
- set->regs = ra_alloc_reg_set(set, ra_reg_count, true);
- set->ra_reg_to_gpr = ralloc_array(set, uint16_t, ra_reg_count);
- set->gpr_to_ra_reg = ralloc_array(set, uint16_t *, total_class_count);
-
- /* .. and classes */
- reg = 0;
- for (unsigned i = 0; i < class_count; i++) {
- set->classes[i] = ra_alloc_reg_class(set->regs);
-
- set->gpr_to_ra_reg[i] = ralloc_array(set, uint16_t, CLASS_REGS(i));
-
- for (unsigned j = 0; j < CLASS_REGS(i); j++) {
- ra_class_add_reg(set->regs, set->classes[i], reg);
-
- set->ra_reg_to_gpr[reg] = j;
- set->gpr_to_ra_reg[i][j] = reg;
-
- for (unsigned br = j; br < j + class_sizes[i]; br++)
- ra_add_transitive_reg_conflict(set->regs, br, reg);
-
- reg++;
- }
- }
-
- first_half_reg = reg;
- base = HALF_OFFSET;
-
- for (unsigned i = 0; i < half_class_count; i++) {
- set->half_classes[i] = ra_alloc_reg_class(set->regs);
-
- set->gpr_to_ra_reg[base + i] =
- ralloc_array(set, uint16_t, HALF_CLASS_REGS(i));
-
- for (unsigned j = 0; j < HALF_CLASS_REGS(i); j++) {
- ra_class_add_reg(set->regs, set->half_classes[i], reg);
-
- set->ra_reg_to_gpr[reg] = j;
- set->gpr_to_ra_reg[base + i][j] = reg;
-
- for (unsigned br = j; br < j + half_class_sizes[i]; br++)
- ra_add_transitive_reg_conflict(set->regs, br + first_half_reg, reg);
-
- reg++;
- }
- }
-
- first_high_reg = reg;
- base = HIGH_OFFSET;
-
- for (unsigned i = 0; i < high_class_count; i++) {
- set->high_classes[i] = ra_alloc_reg_class(set->regs);
-
- set->gpr_to_ra_reg[base + i] =
- ralloc_array(set, uint16_t, HIGH_CLASS_REGS(i));
-
- for (unsigned j = 0; j < HIGH_CLASS_REGS(i); j++) {
- ra_class_add_reg(set->regs, set->high_classes[i], reg);
-
- set->ra_reg_to_gpr[reg] = j;
- set->gpr_to_ra_reg[base + i][j] = reg;
-
- for (unsigned br = j; br < j + high_class_sizes[i]; br++)
- ra_add_transitive_reg_conflict(set->regs, br + first_high_reg, reg);
-
- reg++;
- }
- }
-
- /* starting a6xx, half precision regs conflict w/ full precision regs: */
- if (compiler->gpu_id >= 600) {
- /* because of transitivity, we can get away with just setting up
- * conflicts between the first class of full and half regs:
- */
- for (unsigned i = 0; i < half_class_count; i++) {
- /* NOTE there are fewer half class sizes, but they match the
- * first N full class sizes.. but assert in case that ever
- * accidentally changes:
- */
- debug_assert(class_sizes[i] == half_class_sizes[i]);
- for (unsigned j = 0; j < CLASS_REGS(i) / 2; j++) {
- unsigned freg = set->gpr_to_ra_reg[i][j];
- unsigned hreg0 = set->gpr_to_ra_reg[i + HALF_OFFSET][(j * 2) + 0];
- unsigned hreg1 = set->gpr_to_ra_reg[i + HALF_OFFSET][(j * 2) + 1];
-
- ra_add_transitive_reg_pair_conflict(set->regs, freg, hreg0, hreg1);
- }
- }
-
- // TODO also need to update q_values, but for now:
- ra_set_finalize(set->regs, NULL);
- } else {
- ra_set_finalize(set->regs, q_values);
- }
-
- ralloc_free(q_values);
-
- return set;
-}
-
-/* additional block-data (per-block) */
-struct ir3_ra_block_data {
- BITSET_WORD *def; /* variables defined before used in block */
- BITSET_WORD *use; /* variables used before defined in block */
- BITSET_WORD *livein; /* which defs reach entry point of block */
- BITSET_WORD *liveout; /* which defs reach exit point of block */
-};
-
-/* additional instruction-data (per-instruction) */
-struct ir3_ra_instr_data {
- /* cached instruction 'definer' info: */
- struct ir3_instruction *defn;
- int off, sz, cls;
-};
-
-/* register-assign context, per-shader */
-struct ir3_ra_ctx {
- struct ir3_shader_variant *v;
- struct ir3 *ir;
-
- struct ir3_ra_reg_set *set;
- struct ra_graph *g;
-
- /* Are we in the scalar assignment pass? In this pass, all larger-
- * than-vec1 vales have already been assigned and pre-colored, so
- * we only consider scalar values.
- */
- bool scalar_pass;
-
- unsigned alloc_count;
- /* one per class, plus one slot for arrays: */
- unsigned class_alloc_count[total_class_count + 1];
- unsigned class_base[total_class_count + 1];
- unsigned instr_cnt;
- unsigned *def, *use; /* def/use table */
- struct ir3_ra_instr_data *instrd;
-
- /* Mapping vreg name back to instruction, used select reg callback: */
- struct hash_table *name_to_instr;
-
- /* Tracking for max half/full register assigned. We don't need to
- * track high registers.
- *
- * The feedback about registers used in first pass is used to choose
- * a target register usage to round-robin between in the 2nd pass.
- */
- unsigned max_assigned;
- unsigned max_half_assigned;
-
- /* Tracking for select_reg callback */
- unsigned start_search_reg;
- unsigned max_target;
-};
-
-static int scalar_name(struct ir3_ra_ctx *ctx, struct ir3_instruction *instr, unsigned n);
+static bool name_is_array(struct ir3_ra_ctx *ctx, unsigned name);
+static struct ir3_array * name_to_array(struct ir3_ra_ctx *ctx, unsigned name);
/* does it conflict? */
static inline bool
return !((a_start >= b_end) || (b_start >= a_end));
}
-static unsigned
-reg_size_for_array(struct ir3_array *arr)
-{
- if (arr->half)
- return DIV_ROUND_UP(arr->length, 2);
-
- return arr->length;
-}
-
-static int
-size_to_class(unsigned sz, bool half, bool high)
-{
- if (high) {
- for (unsigned i = 0; i < high_class_count; i++)
- if (high_class_sizes[i] >= sz)
- return i + HIGH_OFFSET;
- } else if (half) {
- for (unsigned i = 0; i < half_class_count; i++)
- if (half_class_sizes[i] >= sz)
- return i + HALF_OFFSET;
- } else {
- for (unsigned i = 0; i < class_count; i++)
- if (class_sizes[i] >= sz)
- return i;
- }
- debug_assert(0);
- return -1;
-}
-
-static bool
-writes_gpr(struct ir3_instruction *instr)
-{
- if (dest_regs(instr) == 0)
- return false;
- /* is dest a normal temp register: */
- struct ir3_register *reg = instr->regs[0];
- debug_assert(!(reg->flags & (IR3_REG_CONST | IR3_REG_IMMED)));
- if ((reg->num == regid(REG_A0, 0)) ||
- (reg->num == regid(REG_P0, 0)))
- return false;
- return true;
-}
-
static bool
instr_before(struct ir3_instruction *a, struct ir3_instruction *b)
{
* need to find the distance between where actual array starts
* and collect.. that probably doesn't happen currently.
*/
- struct ir3_register *src;
int dsz, doff;
/* note: don't use foreach_ssa_src as this gets called once
dd = get_definer(ctx, d->regs[1]->instr, &dsz, &doff);
/* by definition, should come before: */
- debug_assert(instr_before(dd, d));
+ ra_assert(ctx, instr_before(dd, d));
*sz = MAX2(*sz, dsz);
d = dd;
}
- debug_assert(d->opc != OPC_META_SPLIT);
+ ra_assert(ctx, d->opc != OPC_META_SPLIT);
id->defn = d;
id->sz = *sz;
if (instr->regs_count == 0)
continue;
/* couple special cases: */
- if (writes_addr(instr) || writes_pred(instr)) {
+ if (writes_addr0(instr) || writes_addr1(instr) || writes_pred(instr)) {
id->cls = -1;
} else if (instr->regs[0]->flags & IR3_REG_ARRAY) {
id->cls = total_class_count;
} else {
/* and the normal case: */
id->defn = get_definer(ctx, instr, &id->sz, &id->off);
- id->cls = size_to_class(id->sz, is_half(id->defn), is_high(id->defn));
+ id->cls = ra_size_to_class(id->sz, is_half(id->defn), is_high(id->defn));
/* this is a bit of duct-tape.. if we have a scenario like:
*
}
}
+/**
+ * Set a value for max register target.
+ *
+ * Currently this just rounds up to a multiple of full-vec4 (ie. the
+ * granularity that we configure the hw for.. there is no point to
+ * using r3.x if you aren't going to make r3.yzw available). But
+ * in reality there seems to be multiple thresholds that affect the
+ * number of waves.. and we should round up the target to the next
+ * threshold when we round-robin registers, to give postsched more
+ * options. When we understand that better, this is where we'd
+ * implement that.
+ */
+static void
+ra_set_register_target(struct ir3_ra_ctx *ctx, unsigned max_target)
+{
+ const unsigned hvec4 = 4;
+ const unsigned vec4 = 2 * hvec4;
+
+ ctx->max_target = align(max_target, vec4);
+
+ d("New max_target=%u", ctx->max_target);
+}
+
static int
pick_in_range(BITSET_WORD *regs, unsigned min, unsigned max)
{
- for (unsigned i = min; i < max; i++) {
+ for (unsigned i = min; i <= max; i++) {
+ if (BITSET_TEST(regs, i)) {
+ return i;
+ }
+ }
+ return -1;
+}
+
+static int
+pick_in_range_rev(BITSET_WORD *regs, int min, int max)
+{
+ for (int i = max; i >= min; i--) {
if (BITSET_TEST(regs, i)) {
return i;
}
{
struct ir3_ra_ctx *ctx = data;
unsigned int class = ra_get_node_class(ctx->g, n);
+ bool half, high;
+ int sz = ra_class_to_size(class, &half, &high);
+
+ assert (sz > 0);
/* dimensions within the register class: */
unsigned max_target, start;
*/
unsigned base;
+ /* TODO I think eventually we want to round-robin in vector pass
+ * as well, but needs some more work to calculate # of live vals
+ * for this. (Maybe with some work, we could just figure out
+ * the scalar target and use that, since that is what we care
+ * about in the end.. but that would mean setting up use-def/
+ * liveranges for scalar pass before doing vector pass.)
+ *
+ * For now, in the vector class, just move assignments for scalar
+ * vals higher to hopefully prevent them from limiting where vecN
+ * values can be placed. Since the scalar values are re-assigned
+ * in the 2nd pass, we don't really care where they end up in the
+ * vector pass.
+ */
+ if (!ctx->scalar_pass) {
+ base = ctx->set->gpr_to_ra_reg[class][0];
+ if (high) {
+ max_target = HIGH_CLASS_REGS(class - HIGH_OFFSET);
+ } else if (half) {
+ max_target = HALF_CLASS_REGS(class - HALF_OFFSET);
+ } else {
+ max_target = CLASS_REGS(class);
+ }
+
+ if ((sz == 1) && !high) {
+ return pick_in_range_rev(regs, base, base + max_target);
+ } else {
+ return pick_in_range(regs, base, base + max_target);
+ }
+ } else {
+ ra_assert(ctx, sz == 1);
+ }
+
/* NOTE: this is only used in scalar pass, so the register
* class will be one of the scalar classes (ie. idx==0):
*/
- if (class == ctx->set->high_classes[0]) {
+ base = ctx->set->gpr_to_ra_reg[class][0];
+ if (high) {
max_target = HIGH_CLASS_REGS(0);
start = 0;
- base = ctx->set->gpr_to_ra_reg[HIGH_OFFSET][0];
- } else if (class == ctx->set->half_classes[0]) {
+ } else if (half) {
max_target = ctx->max_target;
start = ctx->start_search_reg;
- base = ctx->set->gpr_to_ra_reg[HALF_OFFSET][0];
- } else if (class == ctx->set->classes[0]) {
+ } else {
max_target = ctx->max_target / 2;
start = ctx->start_search_reg;
- base = ctx->set->gpr_to_ra_reg[0][0];
- } else {
- unreachable("unexpected register class!");
}
/* For cat4 instructions, if the src reg is already assigned, and
* dependencies, and it potentially avoids needing (ss) syncs to
* for write after read hazards:
*/
- struct hash_entry *entry = _mesa_hash_table_search(ctx->name_to_instr, &n);
- if (entry) {
- struct ir3_instruction *instr = entry->data;
-
- if (is_sfu(instr) && instr->regs[1]->instr) {
- struct ir3_instruction *src = instr->regs[1]->instr;
- unsigned src_n = scalar_name(ctx, src, 0);
+ struct ir3_instruction *instr = name_to_instr(ctx, n);
+ if (is_sfu(instr)) {
+ struct ir3_register *src = instr->regs[1];
+ int src_n;
+
+ if ((src->flags & IR3_REG_ARRAY) && !(src->flags & IR3_REG_RELATIV)) {
+ struct ir3_array *arr = ir3_lookup_array(ctx->ir, src->array.id);
+ src_n = arr->base + src->array.offset;
+ } else {
+ src_n = scalar_name(ctx, src->instr, 0);
+ }
- unsigned reg = ra_get_node_reg(ctx->g, src_n);
+ unsigned reg = ra_get_node_reg(ctx->g, src_n);
- /* Check if the src register has been assigned yet: */
- if (reg != NO_REG) {
- if (BITSET_TEST(regs, reg)) {
- return reg;
- }
+ /* Check if the src register has been assigned yet: */
+ if (reg != NO_REG) {
+ if (BITSET_TEST(regs, reg)) {
+ return reg;
}
}
}
if (r < 0) {
/* overflow, we need to increase max_target: */
- ctx->max_target++;
+ ra_set_register_target(ctx, ctx->max_target + 1);
return ra_select_reg_merged(n, regs, data);
}
unsigned n, base;
ir3_clear_mark(ctx->ir);
- n = ir3_count_instructions(ctx->ir);
+ n = ir3_count_instructions_ra(ctx->ir);
ctx->instrd = rzalloc_array(NULL, struct ir3_ra_instr_data, n);
base = ctx->class_base[total_class_count];
foreach_array (arr, &ctx->ir->array_list) {
arr->base = base;
- ctx->class_alloc_count[total_class_count] += reg_size_for_array(arr);
- base += reg_size_for_array(arr);
+ ctx->class_alloc_count[total_class_count] += arr->length;
+ base += arr->length;
}
ctx->alloc_count += ctx->class_alloc_count[total_class_count];
+ /* Add vreg names for r0.xyz */
+ ctx->r0_xyz_nodes = ctx->alloc_count;
+ ctx->alloc_count += 3;
+ ctx->hr0_xyz_nodes = ctx->alloc_count;
+ ctx->alloc_count += 3;
+
+ /* Add vreg name for prefetch-exclusion range: */
+ ctx->prefetch_exclude_node = ctx->alloc_count++;
+
+ if (RA_DEBUG) {
+ d("INSTRUCTION VREG NAMES:");
+ foreach_block (block, &ctx->ir->block_list) {
+ foreach_instr (instr, &block->instr_list) {
+ if (!ctx->instrd[instr->ip].defn)
+ continue;
+ if (!writes_gpr(instr))
+ continue;
+ di(instr, "%04u", scalar_name(ctx, instr, 0));
+ }
+ }
+ d("ARRAY VREG NAMES:");
+ foreach_array (arr, &ctx->ir->array_list) {
+ d("%04u: arr%u", arr->base, arr->id);
+ }
+ d("EXTRA VREG NAMES:");
+ d("%04u: r0_xyz_nodes", ctx->r0_xyz_nodes);
+ d("%04u: hr0_xyz_nodes", ctx->hr0_xyz_nodes);
+ d("%04u: prefetch_exclude_node", ctx->prefetch_exclude_node);
+ }
+
ctx->g = ra_alloc_interference_graph(ctx->set->regs, ctx->alloc_count);
ralloc_steal(ctx->g, ctx->instrd);
ctx->def = rzalloc_array(ctx->g, unsigned, ctx->alloc_count);
ctx->use = rzalloc_array(ctx->g, unsigned, ctx->alloc_count);
/* TODO add selector callback for split (pre-a6xx) register file: */
- if (ctx->scalar_pass && (ctx->ir->compiler->gpu_id >= 600)) {
+ if (ctx->v->mergedregs) {
ra_set_select_reg_callback(ctx->g, ra_select_reg_merged, ctx);
- ctx->name_to_instr = _mesa_hash_table_create(ctx->g,
- _mesa_hash_int, _mesa_key_int_equal);
+ if (ctx->scalar_pass) {
+ ctx->name_to_instr = _mesa_hash_table_create(ctx->g,
+ _mesa_hash_int, _mesa_key_int_equal);
+ }
}
}
-static unsigned
-__ra_name(struct ir3_ra_ctx *ctx, int cls, struct ir3_instruction *defn)
+/* Map the name back to instruction: */
+static struct ir3_instruction *
+name_to_instr(struct ir3_ra_ctx *ctx, unsigned name)
{
- unsigned name;
- debug_assert(cls >= 0);
- debug_assert(cls < total_class_count); /* we shouldn't get arrays here.. */
- name = ctx->class_base[cls] + defn->name;
- debug_assert(name < ctx->alloc_count);
- return name;
+ ra_assert(ctx, !name_is_array(ctx, name));
+ struct hash_entry *entry = _mesa_hash_table_search(ctx->name_to_instr, &name);
+ if (entry)
+ return entry->data;
+ ra_unreachable(ctx, "invalid instr name");
+ return NULL;
}
-static int
-ra_name(struct ir3_ra_ctx *ctx, struct ir3_ra_instr_data *id)
+static bool
+name_is_array(struct ir3_ra_ctx *ctx, unsigned name)
{
- /* TODO handle name mapping for arrays */
- return __ra_name(ctx, id->cls, id->defn);
+ return name >= ctx->class_base[total_class_count];
}
-/* Get the scalar name of the n'th component of an instruction dst: */
-static int
-scalar_name(struct ir3_ra_ctx *ctx, struct ir3_instruction *instr, unsigned n)
+static struct ir3_array *
+name_to_array(struct ir3_ra_ctx *ctx, unsigned name)
{
- if (ctx->scalar_pass) {
- if (instr->opc == OPC_META_SPLIT) {
- debug_assert(n == 0); /* split results in a scalar */
- struct ir3_instruction *src = instr->regs[1]->instr;
- return scalar_name(ctx, src, instr->split.off);
- } else if (instr->opc == OPC_META_COLLECT) {
- debug_assert(n < (instr->regs_count + 1));
- struct ir3_instruction *src = instr->regs[n + 1]->instr;
- return scalar_name(ctx, src, 0);
- }
- } else {
- debug_assert(n == 0);
+ ra_assert(ctx, name_is_array(ctx, name));
+ foreach_array (arr, &ctx->ir->array_list) {
+ if (name < (arr->base + arr->length))
+ return arr;
}
-
- return ra_name(ctx, &ctx->instrd[instr->ip]) + n;
+ ra_unreachable(ctx, "invalid array name");
+ return NULL;
}
static void
__def(struct ir3_ra_ctx *ctx, struct ir3_ra_block_data *bd, unsigned name,
struct ir3_instruction *instr)
{
- debug_assert(name < ctx->alloc_count);
+ ra_assert(ctx, name < ctx->alloc_count);
+
+ /* split/collect do not actually define any real value */
+ if ((instr->opc == OPC_META_SPLIT) || (instr->opc == OPC_META_COLLECT))
+ return;
+
/* defined on first write: */
if (!ctx->def[name])
ctx->def[name] = instr->ip;
__use(struct ir3_ra_ctx *ctx, struct ir3_ra_block_data *bd, unsigned name,
struct ir3_instruction *instr)
{
- debug_assert(name < ctx->alloc_count);
+ ra_assert(ctx, name < ctx->alloc_count);
ctx->use[name] = MAX2(ctx->use[name], instr->ip);
if (!BITSET_TEST(bd->def, name))
BITSET_SET(bd->use, name);
}
foreach_instr (instr, &block->instr_list) {
- struct ir3_instruction *src;
- struct ir3_register *reg;
-
- if (writes_gpr(instr)) {
- struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip];
- struct ir3_register *dst = instr->regs[0];
-
- if (dst->flags & IR3_REG_ARRAY) {
- struct ir3_array *arr =
- ir3_lookup_array(ctx->ir, dst->array.id);
- unsigned i;
+ foreach_def (name, ctx, instr) {
+ if (name_is_array(ctx, name)) {
+ struct ir3_array *arr = name_to_array(ctx, name);
arr->start_ip = MIN2(arr->start_ip, instr->ip);
arr->end_ip = MAX2(arr->end_ip, instr->ip);
- /* set the node class now.. in case we don't encounter
- * this array dst again. From register_alloc algo's
- * perspective, these are all single/scalar regs:
- */
- for (i = 0; i < arr->length; i++) {
+ for (unsigned i = 0; i < arr->length; i++) {
unsigned name = arr->base + i;
if(arr->half)
ra_set_node_class(ctx->g, name, ctx->set->half_classes[0]);
else
ra_set_node_class(ctx->g, name, ctx->set->classes[0]);
}
-
- /* indirect write is treated like a write to all array
- * elements, since we don't know which one is actually
- * written:
- */
- if (dst->flags & IR3_REG_RELATIV) {
- for (i = 0; i < arr->length; i++) {
- unsigned name = arr->base + i;
- def(name, instr);
- }
+ } else {
+ struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip];
+ if (is_high(instr)) {
+ ra_set_node_class(ctx->g, name,
+ ctx->set->high_classes[id->cls - HIGH_OFFSET]);
+ } else if (is_half(instr)) {
+ ra_set_node_class(ctx->g, name,
+ ctx->set->half_classes[id->cls - HALF_OFFSET]);
} else {
- unsigned name = arr->base + dst->array.offset;
- def(name, instr);
- }
- } else if (id->defn == instr) {
- /* in scalar pass, we aren't considering virtual register
- * classes, ie. if an instruction writes a vec2, then it
- * defines two different scalar register names.
- */
- unsigned n = ctx->scalar_pass ? dest_regs(instr) : 1;
- for (unsigned i = 0; i < n; i++) {
- unsigned name = scalar_name(ctx, instr, i);
-
- /* tex instructions actually have a wrmask, and
- * don't touch masked out components. We can't do
- * anything useful about that in the first pass,
- * but in the scalar pass we can realize these
- * registers are available:
- */
- if (ctx->scalar_pass && is_tex_or_prefetch(instr) &&
- !(instr->regs[0]->wrmask & (1 << i)))
- continue;
-
- def(name, instr);
-
- if (ctx->name_to_instr && is_sfu(instr)) {
- /* this is slightly annoying, we can't just use an
- * integer on the stack
- */
- unsigned *key = ralloc(ctx->name_to_instr, unsigned);
- *key = name;
- debug_assert(!_mesa_hash_table_search(ctx->name_to_instr, key));
- _mesa_hash_table_insert(ctx->name_to_instr, key, instr);
- }
-
- if ((instr->opc == OPC_META_INPUT) && first_non_input)
- use(name, first_non_input);
-
- if (is_high(instr)) {
- ra_set_node_class(ctx->g, name,
- ctx->set->high_classes[id->cls - HIGH_OFFSET]);
- } else if (is_half(instr)) {
- ra_set_node_class(ctx->g, name,
- ctx->set->half_classes[id->cls - HALF_OFFSET]);
- } else {
- ra_set_node_class(ctx->g, name,
- ctx->set->classes[id->cls]);
- }
+ ra_set_node_class(ctx->g, name,
+ ctx->set->classes[id->cls]);
}
}
+
+ def(name, instr);
+
+ if ((instr->opc == OPC_META_INPUT) && first_non_input)
+ use(name, first_non_input);
+
+ /* Texture instructions with writemasks can be treated as smaller
+ * vectors (or just scalars!) to allocate knowing that the
+ * masked-out regs won't be written, but we need to make sure that
+ * the start of the vector doesn't come before the first register
+ * or we'll wrap.
+ */
+ if (is_tex_or_prefetch(instr)) {
+ int writemask_skipped_regs = ffs(instr->regs[0]->wrmask) - 1;
+ int r0_xyz = is_half(instr) ?
+ ctx->hr0_xyz_nodes : ctx->r0_xyz_nodes;
+ for (int i = 0; i < writemask_skipped_regs; i++)
+ ra_add_node_interference(ctx->g, name, r0_xyz + i);
+ }
+
+ /* Pre-fetched textures have a lower limit for bits to encode dst
+ * register, so add additional interference with registers above
+ * that limit.
+ */
+ if (instr->opc == OPC_META_TEX_PREFETCH) {
+ ra_add_node_interference(ctx->g, name,
+ ctx->prefetch_exclude_node);
+ }
}
- foreach_src(reg, instr) {
- if (reg->flags & IR3_REG_ARRAY) {
- struct ir3_array *arr =
- ir3_lookup_array(ctx->ir, reg->array.id);
+ foreach_use (name, ctx, instr) {
+ if (name_is_array(ctx, name)) {
+ struct ir3_array *arr = name_to_array(ctx, name);
+
arr->start_ip = MIN2(arr->start_ip, instr->ip);
arr->end_ip = MAX2(arr->end_ip, instr->ip);
- /* indirect read is treated like a read from all array
- * elements, since we don't know which one is actually
- * read:
+ /* NOTE: arrays are not SSA so unconditionally
+ * set use bit:
*/
- if (reg->flags & IR3_REG_RELATIV) {
- unsigned i;
- for (i = 0; i < arr->length; i++) {
- unsigned name = arr->base + i;
- use(name, instr);
- BITSET_SET(bd->use, name);
- }
- } else {
- unsigned name = arr->base + reg->array.offset;
- use(name, instr);
- /* NOTE: arrays are not SSA so unconditionally
- * set use bit:
- */
- BITSET_SET(bd->use, name);
- debug_assert(reg->array.offset < arr->length);
- }
- } else if (ctx->scalar_pass) {
- struct ir3_instruction *src = reg->instr;
- /* skip things that aren't SSA: */
- unsigned n = src ? dest_regs(src) : 0;
-
- /* in scalar pass, we aren't considering virtual register
- * classes, ie. if an instruction writes a vec2, then it
- * defines two different scalar register names.
- *
- * We need to traverse up thru collect/split to find the
- * actual non-meta instruction names for each of the
- * components:
+ BITSET_SET(bd->use, name);
+ }
+
+ use(name, instr);
+ }
+
+ foreach_name (name, ctx, instr) {
+ /* split/collect instructions have duplicate names
+ * as real instructions, so they skip the hashtable:
+ */
+ if (ctx->name_to_instr && !((instr->opc == OPC_META_SPLIT) ||
+ (instr->opc == OPC_META_COLLECT))) {
+ /* this is slightly annoying, we can't just use an
+ * integer on the stack
*/
- for (unsigned i = 0; i < n; i++) {
- /* Need to filter out a couple special cases, ie.
- * writes to a0.x or p0.x:
- */
- if (!writes_gpr(src))
- continue;
-
- /* split takes a src w/ wrmask potentially greater
- * than 0x1, but it really only cares about a single
- * component. This shows up in splits coming out of
- * a tex instruction w/ wrmask=.z, for example.
- */
- if (ctx->scalar_pass && (instr->opc == OPC_META_SPLIT) &&
- !(i == instr->split.off))
- continue;
-
- use(scalar_name(ctx, src, i), instr);
- }
- } else if ((src = ssa(reg)) && writes_gpr(src)) {
- unsigned name = ra_name(ctx, &ctx->instrd[src->ip]);
- use(name, instr);
+ unsigned *key = ralloc(ctx->name_to_instr, unsigned);
+ *key = name;
+ ra_assert(ctx, !_mesa_hash_table_search(ctx->name_to_instr, key));
+ _mesa_hash_table_insert(ctx->name_to_instr, key, instr);
}
}
}
/* update livein: */
for (unsigned i = 0; i < bitset_words; i++) {
+ /* anything used but not def'd within a block is
+ * by definition a live value coming into the block:
+ */
BITSET_WORD new_livein =
(bd->use[i] | (bd->liveout[i] & ~bd->def[i]));
succ_bd = succ->data;
for (unsigned i = 0; i < bitset_words; i++) {
+ /* add anything that is livein in a successor block
+ * to our liveout:
+ */
BITSET_WORD new_liveout =
(succ_bd->livein[i] & ~bd->liveout[i]);
print_bitset(const char *name, BITSET_WORD *bs, unsigned cnt)
{
bool first = true;
- debug_printf(" %s:", name);
+ debug_printf("RA: %s:", name);
for (unsigned i = 0; i < cnt; i++) {
if (BITSET_TEST(bs, i)) {
if (!first)
debug_printf("\n");
}
+/* size of one component of instruction result, ie. half vs full: */
+static unsigned
+live_size(struct ir3_instruction *instr)
+{
+ if (is_half(instr)) {
+ return 1;
+ } else if (is_high(instr)) {
+ /* doesn't count towards footprint */
+ return 0;
+ } else {
+ return 2;
+ }
+}
+
+static unsigned
+name_size(struct ir3_ra_ctx *ctx, unsigned name)
+{
+ if (name_is_array(ctx, name)) {
+ struct ir3_array *arr = name_to_array(ctx, name);
+ return arr->half ? 1 : 2;
+ } else {
+ struct ir3_instruction *instr = name_to_instr(ctx, name);
+ /* in scalar pass, each name represents on scalar value,
+ * half or full precision
+ */
+ return live_size(instr);
+ }
+}
+
+static unsigned
+ra_calc_block_live_values(struct ir3_ra_ctx *ctx, struct ir3_block *block)
+{
+ struct ir3_ra_block_data *bd = block->data;
+ unsigned name;
+
+ ra_assert(ctx, ctx->name_to_instr);
+
+ /* TODO this gets a bit more complicated in non-scalar pass.. but
+ * possibly a lowball estimate is fine to start with if we do
+ * round-robin in non-scalar pass? Maybe we just want to handle
+ * that in a different fxn?
+ */
+ ra_assert(ctx, ctx->scalar_pass);
+
+ BITSET_WORD *live =
+ rzalloc_array(bd, BITSET_WORD, BITSET_WORDS(ctx->alloc_count));
+
+ /* Add the live input values: */
+ unsigned livein = 0;
+ BITSET_FOREACH_SET (name, bd->livein, ctx->alloc_count) {
+ livein += name_size(ctx, name);
+ BITSET_SET(live, name);
+ }
+
+ d("---------------------");
+ d("block%u: LIVEIN: %u", block_id(block), livein);
+
+ unsigned max = livein;
+ int cur_live = max;
+
+ /* Now that we know the live inputs to the block, iterate the
+ * instructions adjusting the current # of live values as we
+ * see their last use:
+ */
+ foreach_instr (instr, &block->instr_list) {
+ if (RA_DEBUG)
+ print_bitset("LIVE", live, ctx->alloc_count);
+ di(instr, "CALC");
+
+ unsigned new_live = 0; /* newly live values */
+ unsigned new_dead = 0; /* newly no-longer live values */
+ unsigned next_dead = 0; /* newly dead following this instr */
+
+ foreach_def (name, ctx, instr) {
+ /* NOTE: checking ctx->def filters out things like split/
+ * collect which are just redefining existing live names
+ * or array writes to already live array elements:
+ */
+ if (ctx->def[name] != instr->ip)
+ continue;
+ new_live += live_size(instr);
+ d("NEW_LIVE: %u (new_live=%u, use=%u)", name, new_live, ctx->use[name]);
+ BITSET_SET(live, name);
+ /* There can be cases where this is *also* the last use
+ * of a value, for example instructions that write multiple
+ * values, only some of which are used. These values are
+ * dead *after* (rather than during) this instruction.
+ */
+ if (ctx->use[name] != instr->ip)
+ continue;
+ next_dead += live_size(instr);
+ d("NEXT_DEAD: %u (next_dead=%u)", name, next_dead);
+ BITSET_CLEAR(live, name);
+ }
+
+ /* To be more resilient against special cases where liverange
+ * is extended (like first_non_input), rather than using the
+ * foreach_use() iterator, we iterate the current live values
+ * instead:
+ */
+ BITSET_FOREACH_SET (name, live, ctx->alloc_count) {
+ /* Is this the last use? */
+ if (ctx->use[name] != instr->ip)
+ continue;
+ new_dead += name_size(ctx, name);
+ d("NEW_DEAD: %u (new_dead=%u)", name, new_dead);
+ BITSET_CLEAR(live, name);
+ }
+
+ cur_live += new_live;
+ cur_live -= new_dead;
+
+ ra_assert(ctx, cur_live >= 0);
+ d("CUR_LIVE: %u", cur_live);
+
+ max = MAX2(max, cur_live);
+
+ /* account for written values which are not used later,
+ * but after updating max (since they are for one cycle
+ * live)
+ */
+ cur_live -= next_dead;
+ ra_assert(ctx, cur_live >= 0);
+
+ if (RA_DEBUG) {
+ unsigned cnt = 0;
+ BITSET_FOREACH_SET (name, live, ctx->alloc_count) {
+ cnt += name_size(ctx, name);
+ }
+ ra_assert(ctx, cur_live == cnt);
+ }
+ }
+
+ d("block%u max=%u", block_id(block), max);
+
+ /* the remaining live should match liveout (for extra sanity testing): */
+ if (RA_DEBUG) {
+ unsigned new_dead = 0;
+ BITSET_FOREACH_SET (name, live, ctx->alloc_count) {
+ /* Is this the last use? */
+ if (ctx->use[name] != block->end_ip)
+ continue;
+ new_dead += name_size(ctx, name);
+ d("NEW_DEAD: %u (new_dead=%u)", name, new_dead);
+ BITSET_CLEAR(live, name);
+ }
+ unsigned liveout = 0;
+ BITSET_FOREACH_SET (name, bd->liveout, ctx->alloc_count) {
+ liveout += name_size(ctx, name);
+ BITSET_CLEAR(live, name);
+ }
+
+ if (cur_live != liveout) {
+ print_bitset("LEAKED", live, ctx->alloc_count);
+ /* TODO there are a few edge cases where live-range extension
+ * tells us a value is livein. But not used by the block or
+ * liveout for the block. Possibly a bug in the liverange
+ * extension. But for now leave the assert disabled:
+ ra_assert(ctx, cur_live == liveout);
+ */
+ }
+ }
+
+ ralloc_free(live);
+
+ return max;
+}
+
+static unsigned
+ra_calc_max_live_values(struct ir3_ra_ctx *ctx)
+{
+ unsigned max = 0;
+
+ foreach_block (block, &ctx->ir->block_list) {
+ unsigned block_live = ra_calc_block_live_values(ctx, block);
+ max = MAX2(max, block_live);
+ }
+
+ return max;
+}
+
static void
ra_add_interference(struct ir3_ra_ctx *ctx)
{
arr->end_ip = 0;
}
+ /* set up the r0.xyz precolor regs. */
+ for (int i = 0; i < 3; i++) {
+ ra_set_node_reg(ctx->g, ctx->r0_xyz_nodes + i, i);
+ ra_set_node_reg(ctx->g, ctx->hr0_xyz_nodes + i,
+ ctx->set->first_half_reg + i);
+ }
+
+ /* pre-color node that conflict with half/full regs higher than what
+ * can be encoded for tex-prefetch:
+ */
+ ra_set_node_reg(ctx->g, ctx->prefetch_exclude_node,
+ ctx->set->prefetch_exclude_reg);
+
/* compute live ranges (use/def) on a block level, also updating
* block's def/use bitmasks (used below to calculate per-block
* livein/liveout):
/* update per-block livein/liveout: */
while (ra_compute_livein_liveout(ctx)) {}
- if (ir3_shader_debug & IR3_DBG_OPTMSGS) {
- debug_printf("AFTER LIVEIN/OUT:\n");
+ if (RA_DEBUG) {
+ d("AFTER LIVEIN/OUT:");
foreach_block (block, &ir->block_list) {
struct ir3_ra_block_data *bd = block->data;
- debug_printf("block%u:\n", block_id(block));
+ d("block%u:", block_id(block));
print_bitset(" def", bd->def, ctx->alloc_count);
print_bitset(" use", bd->use, ctx->alloc_count);
print_bitset(" l/i", bd->livein, ctx->alloc_count);
print_bitset(" l/o", bd->liveout, ctx->alloc_count);
}
foreach_array (arr, &ir->array_list) {
- debug_printf("array%u:\n", arr->id);
- debug_printf(" length: %u\n", arr->length);
- debug_printf(" start_ip: %u\n", arr->start_ip);
- debug_printf(" end_ip: %u\n", arr->end_ip);
- }
- debug_printf("INSTRUCTION VREG NAMES:\n");
- foreach_block (block, &ctx->ir->block_list) {
- foreach_instr (instr, &block->instr_list) {
- if (!ctx->instrd[instr->ip].defn)
- continue;
- debug_printf("%04u: ", scalar_name(ctx, instr, 0));
- ir3_print_instr(instr);
- }
- }
- debug_printf("ARRAY VREG NAMES:\n");
- foreach_array (arr, &ctx->ir->array_list) {
- debug_printf("%04u: arr%u\n", arr->base, arr->id);
+ d("array%u:", arr->id);
+ d(" length: %u", arr->length);
+ d(" start_ip: %u", arr->start_ip);
+ d(" end_ip: %u", arr->end_ip);
}
}
if (BITSET_TEST(bd->livein, i + arr->base)) {
arr->start_ip = MIN2(arr->start_ip, block->start_ip);
}
- if (BITSET_TEST(bd->livein, i + arr->base)) {
+ if (BITSET_TEST(bd->liveout, i + arr->base)) {
arr->end_ip = MAX2(arr->end_ip, block->end_ip);
}
}
}
}
- /* need to fix things up to keep outputs live: */
- struct ir3_instruction *out;
- foreach_output(out, ir) {
- unsigned name = ra_name(ctx, &ctx->instrd[out->ip]);
- ctx->use[name] = ctx->instr_cnt;
+ if (ctx->name_to_instr) {
+ unsigned max = ra_calc_max_live_values(ctx);
+ ra_set_register_target(ctx, max);
}
for (unsigned i = 0; i < ctx->alloc_count; i++) {
}
}
-/* some instructions need fix-up if dst register is half precision: */
-static void fixup_half_instr_dst(struct ir3_instruction *instr)
-{
- switch (opc_cat(instr->opc)) {
- case 1: /* move instructions */
- instr->cat1.dst_type = half_type(instr->cat1.dst_type);
- break;
- case 3:
- switch (instr->opc) {
- case OPC_MAD_F32:
- /* Available for that dest is half and srcs are full.
- * eg. mad.f32 hr0, r0.x, r0.y, r0.z
- */
- if (instr->regs[1]->flags & IR3_REG_HALF)
- instr->opc = OPC_MAD_F16;
- break;
- case OPC_SEL_B32:
- instr->opc = OPC_SEL_B16;
- break;
- case OPC_SEL_S32:
- instr->opc = OPC_SEL_S16;
- break;
- case OPC_SEL_F32:
- instr->opc = OPC_SEL_F16;
- break;
- case OPC_SAD_S32:
- instr->opc = OPC_SAD_S16;
- break;
- /* instructions may already be fixed up: */
- case OPC_MAD_F16:
- case OPC_SEL_B16:
- case OPC_SEL_S16:
- case OPC_SEL_F16:
- case OPC_SAD_S16:
- break;
- default:
- assert(0);
- break;
- }
- break;
- case 4:
- switch (instr->opc) {
- case OPC_RSQ:
- instr->opc = OPC_HRSQ;
- break;
- case OPC_LOG2:
- instr->opc = OPC_HLOG2;
- break;
- case OPC_EXP2:
- instr->opc = OPC_HEXP2;
- break;
- default:
- break;
- }
- break;
- case 5:
- instr->cat5.type = half_type(instr->cat5.type);
- break;
- }
-}
-/* some instructions need fix-up if src register is half precision: */
-static void fixup_half_instr_src(struct ir3_instruction *instr)
-{
- switch (instr->opc) {
- case OPC_MOV:
- instr->cat1.src_type = half_type(instr->cat1.src_type);
- break;
- default:
- break;
- }
-}
-
/* NOTE: instr could be NULL for IR3_REG_ARRAY case, for the first
* array access(es) which do not have any previous access to depend
* on from scheduling point of view
*/
if (ctx->scalar_pass && is_tex_or_prefetch(id->defn)) {
unsigned n = ffs(id->defn->regs[0]->wrmask);
- debug_assert(n > 0);
+ ra_assert(ctx, n > 0);
first_component = n - 1;
}
unsigned r = ra_get_node_reg(ctx->g, name);
unsigned num = ctx->set->ra_reg_to_gpr[r] + id->off;
- debug_assert(!(reg->flags & IR3_REG_RELATIV));
+ ra_assert(ctx, !(reg->flags & IR3_REG_RELATIV));
- debug_assert(num >= first_component);
+ ra_assert(ctx, num >= first_component);
if (is_high(id->defn))
num += FIRST_HIGH_REG;
}
}
-static void
-account_assignment(struct ir3_ra_ctx *ctx, struct ir3_instruction *instr)
-{
- struct ir3_ra_instr_data *id;
- struct ir3_register *dst = instr->regs[0];
- unsigned max;
-
- if (is_high(instr))
- return;
-
- if (dst->flags & IR3_REG_ARRAY) {
- struct ir3_array *arr =
- ir3_lookup_array(ctx->ir, dst->array.id);
- max = arr->reg + arr->length;
- } else if ((id = &ctx->instrd[instr->ip]) && id->defn) {
- unsigned name = scalar_name(ctx, id->defn, 0);
- unsigned r = ra_get_node_reg(ctx->g, name);
- max = ctx->set->ra_reg_to_gpr[r] + id->off;
- } else {
- return;
- }
-
- if (is_half(instr)) {
- ctx->max_half_assigned = MAX2(ctx->max_half_assigned, max);
- } else {
- ctx->max_assigned = MAX2(ctx->max_assigned, max);
- }
-}
-
/* helper to determine which regs to assign in which pass: */
static bool
should_assign(struct ir3_ra_ctx *ctx, struct ir3_instruction *instr)
{
- if ((instr->opc == OPC_META_SPLIT) ||
- (instr->opc == OPC_META_COLLECT))
+ if ((instr->opc == OPC_META_SPLIT) &&
+ (util_bitcount(instr->regs[1]->wrmask) > 1))
+ return !ctx->scalar_pass;
+ if ((instr->opc == OPC_META_COLLECT) &&
+ (util_bitcount(instr->regs[0]->wrmask) > 1))
return !ctx->scalar_pass;
return ctx->scalar_pass;
}
ra_block_alloc(struct ir3_ra_ctx *ctx, struct ir3_block *block)
{
foreach_instr (instr, &block->instr_list) {
- struct ir3_register *reg;
if (writes_gpr(instr)) {
- account_assignment(ctx, instr);
if (should_assign(ctx, instr)) {
reg_assign(ctx, instr->regs[0], instr);
- if (instr->regs[0]->flags & IR3_REG_HALF)
- fixup_half_instr_dst(instr);
}
}
- foreach_src_n(reg, n, instr) {
+ foreach_src_n (reg, n, instr) {
struct ir3_instruction *src = reg->instr;
if (src && !should_assign(ctx, src) && !should_assign(ctx, instr))
/* Note: reg->instr could be null for IR3_REG_ARRAY */
if (src || (reg->flags & IR3_REG_ARRAY))
reg_assign(ctx, instr->regs[n+1], src);
-
- if (instr->regs[n+1]->flags & IR3_REG_HALF)
- fixup_half_instr_src(instr);
}
}
* them in the first pass:
*/
if (!ctx->scalar_pass) {
- struct ir3_instruction *in, *out;
-
foreach_input (in, ctx->ir) {
reg_assign(ctx, in->regs[0], in);
}
}
}
+static void
+assign_arr_base(struct ir3_ra_ctx *ctx, struct ir3_array *arr,
+ struct ir3_instruction **precolor, unsigned nprecolor)
+{
+ /* In the mergedregs case, we convert full precision arrays
+ * to their effective half-precision base, and find conflicts
+ * amongst all other arrays/inputs.
+ *
+ * In the splitregs case (halfreg file and fullreg file do
+ * not conflict), we ignore arrays and other pre-colors that
+ * are not the same precision.
+ */
+ bool mergedregs = ctx->v->mergedregs;
+ unsigned base = 0;
+
+ /* figure out what else we conflict with which has already
+ * been assigned:
+ */
+retry:
+ foreach_array (arr2, &ctx->ir->array_list) {
+ if (arr2 == arr)
+ break;
+ ra_assert(ctx, arr2->start_ip <= arr2->end_ip);
+
+ unsigned base2 = arr2->reg;
+ unsigned len2 = arr2->length;
+ unsigned len = arr->length;
+
+ if (mergedregs) {
+ /* convert into half-reg space: */
+ if (!arr2->half) {
+ base2 *= 2;
+ len2 *= 2;
+ }
+ if (!arr->half) {
+ len *= 2;
+ }
+ } else if (arr2->half != arr->half) {
+ /* for split-register-file mode, we only conflict with
+ * other arrays of same precision:
+ */
+ continue;
+ }
+
+ /* if it intersects with liverange AND register range.. */
+ if (intersects(arr->start_ip, arr->end_ip,
+ arr2->start_ip, arr2->end_ip) &&
+ intersects(base, base + len,
+ base2, base2 + len2)) {
+ base = MAX2(base, base2 + len2);
+ goto retry;
+ }
+ }
+
+ /* also need to not conflict with any pre-assigned inputs: */
+ for (unsigned i = 0; i < nprecolor; i++) {
+ struct ir3_instruction *instr = precolor[i];
+
+ if (!instr || (instr->flags & IR3_INSTR_UNUSED))
+ continue;
+
+ struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip];
+
+ /* only consider the first component: */
+ if (id->off > 0)
+ continue;
+
+ unsigned name = ra_name(ctx, id);
+ unsigned regid = instr->regs[0]->num;
+ unsigned reglen = class_sizes[id->cls];
+ unsigned len = arr->length;
+
+ if (mergedregs) {
+ /* convert into half-reg space: */
+ if (!is_half(instr)) {
+ regid *= 2;
+ reglen *= 2;
+ }
+ if (!arr->half) {
+ len *= 2;
+ }
+ } else if (is_half(instr) != arr->half) {
+ /* for split-register-file mode, we only conflict with
+ * other arrays of same precision:
+ */
+ continue;
+ }
+
+ /* Check if array intersects with liverange AND register
+ * range of the input:
+ */
+ if (intersects(arr->start_ip, arr->end_ip,
+ ctx->def[name], ctx->use[name]) &&
+ intersects(base, base + len,
+ regid, regid + reglen)) {
+ base = MAX2(base, regid + reglen);
+ goto retry;
+ }
+ }
+
+ /* convert back from half-reg space to fullreg space: */
+ if (mergedregs && !arr->half) {
+ base = DIV_ROUND_UP(base, 2);
+ }
+
+ arr->reg = base;
+}
+
/* handle pre-colored registers. This includes "arrays" (which could be of
* length 1, used for phi webs lowered to registers in nir), as well as
* special shader input values that need to be pinned to certain registers.
static void
ra_precolor(struct ir3_ra_ctx *ctx, struct ir3_instruction **precolor, unsigned nprecolor)
{
- unsigned num_precolor = 0;
for (unsigned i = 0; i < nprecolor; i++) {
if (precolor[i] && !(precolor[i]->flags & IR3_INSTR_UNUSED)) {
struct ir3_instruction *instr = precolor[i];
struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip];
- debug_assert(!(instr->regs[0]->flags & (IR3_REG_HALF | IR3_REG_HIGH)));
-
- /* only consider the first component: */
- if (id->off > 0)
- continue;
-
- if (ctx->scalar_pass && !should_assign(ctx, instr))
- continue;
+ ra_assert(ctx, !(instr->regs[0]->flags & (IR3_REG_HALF | IR3_REG_HIGH)));
/* 'base' is in scalar (class 0) but we need to map that
* the conflicting register of the appropriate class (ie.
* .. and so on..
*/
unsigned regid = instr->regs[0]->num;
+ ra_assert(ctx, regid >= id->off);
+ regid -= id->off;
+
unsigned reg = ctx->set->gpr_to_ra_reg[id->cls][regid];
unsigned name = ra_name(ctx, id);
ra_set_node_reg(ctx->g, name, reg);
- num_precolor = MAX2(regid, num_precolor);
}
}
- /* pre-assign array elements:
- *
- * TODO this is going to need some work for half-precision.. possibly
- * this is easier on a6xx, where we can just divide array size by two?
- * But on a5xx and earlier it will need to track two bases.
+ /*
+ * Pre-assign array elements:
*/
foreach_array (arr, &ctx->ir->array_list) {
- unsigned base = 0;
if (arr->end_ip == 0)
continue;
- /* figure out what else we conflict with which has already
- * been assigned:
- */
-retry:
- foreach_array (arr2, &ctx->ir->array_list) {
- if (arr2 == arr)
- break;
- if (arr2->end_ip == 0)
- continue;
- /* if it intersects with liverange AND register range.. */
- if (intersects(arr->start_ip, arr->end_ip,
- arr2->start_ip, arr2->end_ip) &&
- intersects(base, base + reg_size_for_array(arr),
- arr2->reg, arr2->reg + reg_size_for_array(arr2))) {
- base = MAX2(base, arr2->reg + reg_size_for_array(arr2));
- goto retry;
- }
- }
-
- /* also need to not conflict with any pre-assigned inputs: */
- for (unsigned i = 0; i < nprecolor; i++) {
- struct ir3_instruction *instr = precolor[i];
-
- if (!instr || (instr->flags & IR3_INSTR_UNUSED))
- continue;
-
- struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip];
-
- /* only consider the first component: */
- if (id->off > 0)
- continue;
-
- unsigned name = ra_name(ctx, id);
- unsigned regid = instr->regs[0]->num;
-
- /* Check if array intersects with liverange AND register
- * range of the input:
- */
- if (intersects(arr->start_ip, arr->end_ip,
- ctx->def[name], ctx->use[name]) &&
- intersects(base, base + reg_size_for_array(arr),
- regid, regid + class_sizes[id->cls])) {
- base = MAX2(base, regid + class_sizes[id->cls]);
- goto retry;
- }
- }
-
- arr->reg = base;
+ if (!ctx->scalar_pass)
+ assign_arr_base(ctx, arr, precolor, nprecolor);
for (unsigned i = 0; i < arr->length; i++) {
- unsigned name, reg;
-
- if (arr->half) {
- /* Doesn't need to do this on older generations than a6xx,
- * since there's no conflict between full regs and half regs
- * on them.
- *
- * TODO Presumably "base" could start from 0 respectively
- * for half regs of arrays on older generations.
- */
- unsigned base_half = base * 2 + i;
- reg = ctx->set->gpr_to_ra_reg[0+HALF_OFFSET][base_half];
- base = base_half / 2 + 1;
- } else {
- reg = ctx->set->gpr_to_ra_reg[0][base++];
- }
+ unsigned cls = arr->half ? HALF_OFFSET : 0;
- name = arr->base + i;
- ra_set_node_reg(ctx->g, name, reg);
+ ra_set_node_reg(ctx->g,
+ arr->base + i, /* vreg name */
+ ctx->set->gpr_to_ra_reg[cls][arr->reg + i]);
}
}
static void
ra_precolor_assigned(struct ir3_ra_ctx *ctx)
{
- debug_assert(ctx->scalar_pass);
+ ra_assert(ctx, ctx->scalar_pass);
foreach_block (block, &ctx->ir->block_list) {
foreach_instr (instr, &block->instr_list) {
- if ((instr->opc != OPC_META_SPLIT) &&
- (instr->opc != OPC_META_COLLECT))
+ if (!writes_gpr(instr))
+ continue;
+
+ if (should_assign(ctx, instr))
continue;
precolor(ctx, instr);
- struct ir3_register *src;
foreach_src (src, instr) {
if (!src->instr)
continue;
debug_assert(dst->num == (src->num + instr->split.off));
} else if (instr->opc == OPC_META_COLLECT) {
struct ir3_register *dst = instr->regs[0];
- struct ir3_register *src;
foreach_src_n (src, n, instr) {
debug_assert(dst->num == (src->num - n));
}
}
-/* Target is calculated in terms of half-regs (with a full reg
- * consisting of two half-regs).
- */
-static void
-ra_calc_merged_register_target(struct ir3_ra_ctx *ctx)
-{
- const unsigned vec4 = 2 * 4; // 8 half-regs
- unsigned t = MAX2(2 * ctx->max_assigned, ctx->max_half_assigned);
-
- /* second RA pass may have saved some regs, let's try to reclaim
- * the benefit by adjusting the target downwards slightly:
- */
- if (ir3_has_latency_to_hide(ctx->ir)) {
- if (t > 8 * vec4) {
- t -= 2 * vec4;
- } else if (t > 6 * vec4) {
- t -= vec4;
- }
- }
-
- ctx->max_target = t;
-}
-
static int
ir3_ra_pass(struct ir3_shader_variant *v, struct ir3_instruction **precolor,
- unsigned nprecolor, bool scalar_pass, unsigned *target)
+ unsigned nprecolor, bool scalar_pass)
{
struct ir3_ra_ctx ctx = {
.v = v,
.ir = v->ir,
- .set = v->ir->compiler->set,
+ .set = v->mergedregs ?
+ v->ir->compiler->mergedregs_set : v->ir->compiler->set,
.scalar_pass = scalar_pass,
};
int ret;
- if (scalar_pass) {
- ctx.max_target = *target;
- }
+ ret = setjmp(ctx.jmp_env);
+ if (ret)
+ goto fail;
ra_init(&ctx);
ra_add_interference(&ctx);
if (scalar_pass)
ra_precolor_assigned(&ctx);
ret = ra_alloc(&ctx);
- ra_destroy(&ctx);
- /* In the first pass, calculate the target register usage used in the
- * second (scalar) pass:
- */
- if (!scalar_pass) {
- /* TODO: round-robin support for pre-a6xx: */
- if (ctx.ir->compiler->gpu_id >= 600) {
- ra_calc_merged_register_target(&ctx);
- }
- *target = ctx.max_target;
- }
+fail:
+ ra_destroy(&ctx);
return ret;
}
ir3_ra(struct ir3_shader_variant *v, struct ir3_instruction **precolor,
unsigned nprecolor)
{
- unsigned target = 0;
int ret;
/* First pass, assign the vecN (non-scalar) registers: */
- ret = ir3_ra_pass(v, precolor, nprecolor, false, &target);
+ ret = ir3_ra_pass(v, precolor, nprecolor, false);
if (ret)
return ret;
- if (ir3_shader_debug & IR3_DBG_OPTMSGS) {
- printf("AFTER RA (1st pass):\n");
- ir3_print(v->ir);
- }
+ ir3_debug_print(v->ir, "AFTER: ir3_ra (1st pass)");
/* Second pass, assign the scalar registers: */
- ret = ir3_ra_pass(v, precolor, nprecolor, true, &target);
+ ret = ir3_ra_pass(v, precolor, nprecolor, true);
if (ret)
return ret;
- if (ir3_shader_debug & IR3_DBG_OPTMSGS) {
- printf("AFTER RA (2nd pass):\n");
- ir3_print(v->ir);
- }
+ ir3_debug_print(v->ir, "AFTER: ir3_ra (2st pass)");
#ifdef DEBUG
# define SANITY_CHECK DEBUG