#include "draw_vs.h"
#include "draw_pipe.h"
+#include "draw_fs.h"
#ifndef IS_NEGATIVE
#define DIFFERENT_SIGNS(x, y) ((x) * (y) <= 0.0F && (x) - (y) != 0.0F)
#endif
-#ifndef MAX_CLIPPED_VERTICES
#define MAX_CLIPPED_VERTICES ((2 * (6 + PIPE_MAX_CLIP_PLANES))+1)
-#endif
-struct clipper {
+struct clip_stage {
struct draw_stage stage; /**< base class */
- /* Basically duplicate some of the flatshading logic here:
- */
- boolean flat;
- uint num_color_attribs;
- uint color_attribs[4]; /* front/back primary/secondary colors */
+ /* List of the attributes to be flatshaded. */
+ uint num_flat_attribs;
+ uint flat_attribs[PIPE_MAX_SHADER_OUTPUTS];
+
+ /* Mask of attributes in noperspective mode */
+ boolean noperspective_attribs[PIPE_MAX_SHADER_OUTPUTS];
float (*plane)[4];
};
-/* This is a bit confusing:
- */
-static INLINE struct clipper *clipper_stage( struct draw_stage *stage )
+/** Cast wrapper */
+static INLINE struct clip_stage *clip_stage( struct draw_stage *stage )
{
- return (struct clipper *)stage;
+ return (struct clip_stage *)stage;
}
/* All attributes are float[4], so this is easy:
*/
-static void interp_attr( float *fdst,
+static void interp_attr( float dst[4],
float t,
- const float *fin,
- const float *fout )
+ const float in[4],
+ const float out[4] )
{
- fdst[0] = LINTERP( t, fout[0], fin[0] );
- fdst[1] = LINTERP( t, fout[1], fin[1] );
- fdst[2] = LINTERP( t, fout[2], fin[2] );
- fdst[3] = LINTERP( t, fout[3], fin[3] );
+ dst[0] = LINTERP( t, out[0], in[0] );
+ dst[1] = LINTERP( t, out[1], in[1] );
+ dst[2] = LINTERP( t, out[2], in[2] );
+ dst[3] = LINTERP( t, out[3], in[3] );
}
-static void copy_colors( struct draw_stage *stage,
- struct vertex_header *dst,
- const struct vertex_header *src )
+
+/**
+ * Copy flat shaded attributes src vertex to dst vertex.
+ */
+static void copy_flat( struct draw_stage *stage,
+ struct vertex_header *dst,
+ const struct vertex_header *src )
{
- const struct clipper *clipper = clipper_stage(stage);
+ const struct clip_stage *clipper = clip_stage(stage);
uint i;
- for (i = 0; i < clipper->num_color_attribs; i++) {
- const uint attr = clipper->color_attribs[i];
+ for (i = 0; i < clipper->num_flat_attribs; i++) {
+ const uint attr = clipper->flat_attribs[i];
COPY_4FV(dst->data[attr], src->data[attr]);
}
}
/* Interpolate between two vertices to produce a third.
*/
-static void interp( const struct clipper *clip,
+static void interp( const struct clip_stage *clip,
struct vertex_header *dst,
float t,
const struct vertex_header *out,
const struct vertex_header *in )
{
- const unsigned nr_attrs = clip->stage.draw->vs.num_vs_outputs;
- const unsigned pos_attr = clip->stage.draw->vs.position_output;
+ const unsigned nr_attrs = draw_current_shader_outputs(clip->stage.draw);
+ const unsigned pos_attr = draw_current_shader_position_output(clip->stage.draw);
+ const unsigned clip_attr = draw_current_shader_clipvertex_output(clip->stage.draw);
unsigned j;
+ float t_nopersp;
/* Vertex header.
*/
- {
- dst->clipmask = 0;
- dst->edgeflag = 0; /* will get overwritten later */
- dst->pad = 0;
- dst->vertex_id = UNDEFINED_VERTEX_ID;
- }
+ dst->clipmask = 0;
+ dst->edgeflag = 0; /* will get overwritten later */
+ dst->have_clipdist = in->have_clipdist;
+ dst->vertex_id = UNDEFINED_VERTEX_ID;
- /* Clip coordinates: interpolate normally
+ /* Interpolate the clip-space coords.
*/
- {
- interp_attr(dst->clip, t, in->clip, out->clip);
- }
+ interp_attr(dst->clip, t, in->clip, out->clip);
+ /* interpolate the clip-space position */
+ interp_attr(dst->pre_clip_pos, t, in->pre_clip_pos, out->pre_clip_pos);
- /* Do the projective divide and insert window coordinates:
+ /* Do the projective divide and viewport transformation to get
+ * new window coordinates:
*/
{
- const float *pos = dst->clip;
+ const float *pos = dst->pre_clip_pos;
const float *scale = clip->stage.draw->viewport.scale;
const float *trans = clip->stage.draw->viewport.translate;
const float oow = 1.0f / pos[3];
dst->data[pos_attr][2] = pos[2] * oow * scale[2] + trans[2];
dst->data[pos_attr][3] = oow;
}
+
+ /**
+ * Compute the t in screen-space instead of 3d space to use
+ * for noperspective interpolation.
+ *
+ * The points can be aligned with the X axis, so in that case try
+ * the Y. When both points are at the same screen position, we can
+ * pick whatever value (the interpolated point won't be in front
+ * anyway), so just use the 3d t.
+ */
+ {
+ int k;
+ t_nopersp = t;
+ for (k = 0; k < 2; k++)
+ if (in->data[pos_attr][k] != out->data[pos_attr][k]) {
+ t_nopersp = (dst->data[pos_attr][k] - out->data[pos_attr][k]) /
+ (in->data[pos_attr][k] - out->data[pos_attr][k]);
+ break;
+ }
+ }
/* Other attributes
*/
for (j = 0; j < nr_attrs; j++) {
- if (j != pos_attr)
- interp_attr(dst->data[j], t, in->data[j], out->data[j]);
+ if (j != pos_attr && j != clip_attr) {
+ if (clip->noperspective_attribs[j])
+ interp_attr(dst->data[j], t_nopersp, in->data[j], out->data[j]);
+ else
+ interp_attr(dst->data[j], t, in->data[j], out->data[j]);
+ }
}
}
+/**
+ * Emit a post-clip polygon to the next pipeline stage. The polygon
+ * will be convex and the provoking vertex will always be vertex[0].
+ */
static void emit_poly( struct draw_stage *stage,
struct vertex_header **inlist,
+ const boolean *edgeflags,
unsigned n,
const struct prim_header *origPrim)
{
struct prim_header header;
unsigned i;
+ ushort edge_first, edge_middle, edge_last;
+
+ if (stage->draw->rasterizer->flatshade_first) {
+ edge_first = DRAW_PIPE_EDGE_FLAG_0;
+ edge_middle = DRAW_PIPE_EDGE_FLAG_1;
+ edge_last = DRAW_PIPE_EDGE_FLAG_2;
+ }
+ else {
+ edge_first = DRAW_PIPE_EDGE_FLAG_2;
+ edge_middle = DRAW_PIPE_EDGE_FLAG_0;
+ edge_last = DRAW_PIPE_EDGE_FLAG_1;
+ }
- const ushort edge_first = DRAW_PIPE_EDGE_FLAG_2;
- const ushort edge_middle = DRAW_PIPE_EDGE_FLAG_0;
- const ushort edge_last = DRAW_PIPE_EDGE_FLAG_1;
+ if (!edgeflags[0])
+ edge_first = 0;
/* later stages may need the determinant, but only the sign matters */
header.det = origPrim->det;
header.pad = 0;
for (i = 2; i < n; i++, header.flags = edge_middle) {
- header.v[0] = inlist[i-1];
- header.v[1] = inlist[i];
- header.v[2] = inlist[0]; /* keep in v[2] for flatshading */
+ /* order the triangle verts to respect the provoking vertex mode */
+ if (stage->draw->rasterizer->flatshade_first) {
+ header.v[0] = inlist[0]; /* the provoking vertex */
+ header.v[1] = inlist[i-1];
+ header.v[2] = inlist[i];
+ }
+ else {
+ header.v[0] = inlist[i-1];
+ header.v[1] = inlist[i];
+ header.v[2] = inlist[0]; /* the provoking vertex */
+ }
+
+ if (!edgeflags[i-1]) {
+ header.flags &= ~edge_middle;
+ }
- if (i == n-1)
- header.flags |= edge_last;
+ if (i == n - 1 && edgeflags[i])
+ header.flags |= edge_last;
if (0) {
const struct draw_vertex_shader *vs = stage->draw->vs.vertex_shader;
uint j, k;
- debug_printf("Clipped tri:\n");
+ debug_printf("Clipped tri: (flat-shade-first = %d)\n",
+ stage->draw->rasterizer->flatshade_first);
for (j = 0; j < 3; j++) {
for (k = 0; k < vs->info.num_outputs; k++) {
debug_printf(" Vert %d: Attr %d: %f %f %f %f\n", j, k,
}
}
+
static INLINE float
dot4(const float *a, const float *b)
{
- return (a[0]*b[0] +
- a[1]*b[1] +
- a[2]*b[2] +
- a[3]*b[3]);
+ return (a[0] * b[0] +
+ a[1] * b[1] +
+ a[2] * b[2] +
+ a[3] * b[3]);
}
+/*
+ * this function extracts the clip distance for the current plane,
+ * it first checks if the shader provided a clip distance, otherwise
+ * it works out the value using the clipvertex
+ */
+static INLINE float getclipdist(const struct clip_stage *clipper,
+ struct vertex_header *vert,
+ int plane_idx)
+{
+ const float *plane;
+ float dp;
+ if (vert->have_clipdist && plane_idx >= 6) {
+ /* pick the correct clipdistance element from the output vectors */
+ int _idx = plane_idx - 6;
+ int cdi = _idx >= 4;
+ int vidx = cdi ? _idx - 4 : _idx;
+ dp = vert->data[draw_current_shader_clipdistance_output(clipper->stage.draw, cdi)][vidx];
+ } else {
+ plane = clipper->plane[plane_idx];
+ dp = dot4(vert->clip, plane);
+ }
+ return dp;
+}
/* Clip a triangle against the viewport and user clip planes.
*/
struct prim_header *header,
unsigned clipmask )
{
- struct clipper *clipper = clipper_stage( stage );
+ struct clip_stage *clipper = clip_stage( stage );
struct vertex_header *a[MAX_CLIPPED_VERTICES];
struct vertex_header *b[MAX_CLIPPED_VERTICES];
struct vertex_header **inlist = a;
unsigned tmpnr = 0;
unsigned n = 3;
unsigned i;
+ boolean aEdges[MAX_CLIPPED_VERTICES];
+ boolean bEdges[MAX_CLIPPED_VERTICES];
+ boolean *inEdges = aEdges;
+ boolean *outEdges = bEdges;
inlist[0] = header->v[0];
inlist[1] = header->v[1];
inlist[2] = header->v[2];
+ /*
+ * Note: at this point we can't just use the per-vertex edge flags.
+ * We have to observe the edge flag bits set in header->flags which
+ * were set during primitive decomposition. Put those flags into
+ * an edge flags array which parallels the vertex array.
+ * Later, in the 'unfilled' pipeline stage we'll draw the edge if both
+ * the header.flags bit is set AND the per-vertex edgeflag field is set.
+ */
+ inEdges[0] = !!(header->flags & DRAW_PIPE_EDGE_FLAG_0);
+ inEdges[1] = !!(header->flags & DRAW_PIPE_EDGE_FLAG_1);
+ inEdges[2] = !!(header->flags & DRAW_PIPE_EDGE_FLAG_2);
+
while (clipmask && n >= 3) {
const unsigned plane_idx = ffs(clipmask)-1;
- const float *plane = clipper->plane[plane_idx];
+ const boolean is_user_clip_plane = plane_idx >= 6;
struct vertex_header *vert_prev = inlist[0];
- float dp_prev = dot4( vert_prev->clip, plane );
+ boolean *edge_prev = &inEdges[0];
+ float dp_prev;
unsigned outcount = 0;
+ dp_prev = getclipdist(clipper, vert_prev, plane_idx);
clipmask &= ~(1<<plane_idx);
+ assert(n < MAX_CLIPPED_VERTICES);
+ if (n >= MAX_CLIPPED_VERTICES)
+ return;
inlist[n] = inlist[0]; /* prevent rotation of vertices */
+ inEdges[n] = inEdges[0];
for (i = 1; i <= n; i++) {
struct vertex_header *vert = inlist[i];
+ boolean *edge = &inEdges[i];
- float dp = dot4( vert->clip, plane );
+ float dp = getclipdist(clipper, vert, plane_idx);
if (!IS_NEGATIVE(dp_prev)) {
+ assert(outcount < MAX_CLIPPED_VERTICES);
+ if (outcount >= MAX_CLIPPED_VERTICES)
+ return;
+ outEdges[outcount] = *edge_prev;
outlist[outcount++] = vert_prev;
}
if (DIFFERENT_SIGNS(dp, dp_prev)) {
- struct vertex_header *new_vert = clipper->stage.tmp[tmpnr++];
+ struct vertex_header *new_vert;
+ boolean *new_edge;
+
+ assert(tmpnr < MAX_CLIPPED_VERTICES + 1);
+ if (tmpnr >= MAX_CLIPPED_VERTICES + 1)
+ return;
+ new_vert = clipper->stage.tmp[tmpnr++];
+
+ assert(outcount < MAX_CLIPPED_VERTICES);
+ if (outcount >= MAX_CLIPPED_VERTICES)
+ return;
+
+ new_edge = &outEdges[outcount];
outlist[outcount++] = new_vert;
if (IS_NEGATIVE(dp)) {
float t = dp / (dp - dp_prev);
interp( clipper, new_vert, t, vert, vert_prev );
- /* Force edgeflag true in this case:
+ /* Whether or not to set edge flag for the new vert depends
+ * on whether it's a user-defined clipping plane. We're
+ * copying NVIDIA's behaviour here.
*/
- new_vert->edgeflag = 1;
- } else {
+ if (is_user_clip_plane) {
+ /* we want to see an edge along the clip plane */
+ *new_edge = TRUE;
+ new_vert->edgeflag = TRUE;
+ }
+ else {
+ /* we don't want to see an edge along the frustum clip plane */
+ *new_edge = *edge_prev;
+ new_vert->edgeflag = FALSE;
+ }
+ }
+ else {
/* Coming back in.
*/
float t = dp_prev / (dp_prev - dp);
/* Copy starting vert's edgeflag:
*/
new_vert->edgeflag = vert_prev->edgeflag;
+ *new_edge = *edge_prev;
}
}
vert_prev = vert;
+ edge_prev = edge;
dp_prev = dp;
}
+ /* swap in/out lists */
{
struct vertex_header **tmp = inlist;
inlist = outlist;
outlist = tmp;
n = outcount;
}
- }
-
- /* If flat-shading, copy color to new provoking vertex.
- */
- if (clipper->flat && inlist[0] != header->v[2]) {
- if (1) {
- inlist[0] = dup_vert(stage, inlist[0], tmpnr++);
+ {
+ boolean *tmp = inEdges;
+ inEdges = outEdges;
+ outEdges = tmp;
}
- copy_colors(stage, inlist[0], header->v[2]);
}
-
-
- /* Emit the polygon as triangles to the setup stage:
+ /* If flat-shading, copy provoking vertex color to polygon vertex[0]
*/
- if (n >= 3)
- emit_poly( stage, inlist, n, header );
+ if (n >= 3) {
+ if (clipper->num_flat_attribs) {
+ if (stage->draw->rasterizer->flatshade_first) {
+ if (inlist[0] != header->v[0]) {
+ assert(tmpnr < MAX_CLIPPED_VERTICES + 1);
+ if (tmpnr >= MAX_CLIPPED_VERTICES + 1)
+ return;
+ inlist[0] = dup_vert(stage, inlist[0], tmpnr++);
+ copy_flat(stage, inlist[0], header->v[0]);
+ }
+ }
+ else {
+ if (inlist[0] != header->v[2]) {
+ assert(tmpnr < MAX_CLIPPED_VERTICES + 1);
+ if (tmpnr >= MAX_CLIPPED_VERTICES + 1)
+ return;
+ inlist[0] = dup_vert(stage, inlist[0], tmpnr++);
+ copy_flat(stage, inlist[0], header->v[2]);
+ }
+ }
+ }
+
+ /* Emit the polygon as triangles to the setup stage:
+ */
+ emit_poly( stage, inlist, inEdges, n, header );
+ }
}
struct prim_header *header,
unsigned clipmask )
{
- const struct clipper *clipper = clipper_stage( stage );
+ const struct clip_stage *clipper = clip_stage( stage );
struct vertex_header *v0 = header->v[0];
struct vertex_header *v1 = header->v[1];
- const float *pos0 = v0->clip;
- const float *pos1 = v1->clip;
float t0 = 0.0F;
float t1 = 0.0F;
struct prim_header newprim;
while (clipmask) {
const unsigned plane_idx = ffs(clipmask)-1;
- const float *plane = clipper->plane[plane_idx];
- const float dp0 = dot4( pos0, plane );
- const float dp1 = dot4( pos1, plane );
+ const float dp0 = getclipdist(clipper, v0, plane_idx);
+ const float dp1 = getclipdist(clipper, v1, plane_idx);
if (dp1 < 0.0F) {
float t = dp1 / (dp1 - dp0);
if (v0->clipmask) {
interp( clipper, stage->tmp[0], t0, v0, v1 );
-
- if (clipper->flat)
- copy_colors(stage, stage->tmp[0], v0);
-
+ copy_flat(stage, stage->tmp[0], v0);
newprim.v[0] = stage->tmp[0];
}
else {
}
}
+
/* Update state. Could further delay this until we hit the first
* primitive that really requires clipping.
*/
static void
clip_init_state( struct draw_stage *stage )
{
- struct clipper *clipper = clipper_stage( stage );
+ struct clip_stage *clipper = clip_stage( stage );
+ const struct draw_vertex_shader *vs = stage->draw->vs.vertex_shader;
+ const struct draw_fragment_shader *fs = stage->draw->fs.fragment_shader;
+ uint i;
- clipper->flat = stage->draw->rasterizer->flatshade ? TRUE : FALSE;
+ /* We need to know for each attribute what kind of interpolation is
+ * done on it (flat, smooth or noperspective). But the information
+ * is not directly accessible for outputs, only for inputs. So we
+ * have to match semantic name and index between the VS (or GS/ES)
+ * outputs and the FS inputs to get to the interpolation mode.
+ *
+ * The only hitch is with gl_FrontColor/gl_BackColor which map to
+ * gl_Color, and their Secondary versions. First there are (up to)
+ * two outputs for one input, so we tuck the information in a
+ * specific array. Second if they don't have qualifiers, the
+ * default value has to be picked from the global shade mode.
+ *
+ * Of course, if we don't have a fragment shader in the first
+ * place, defaults should be used.
+ */
- if (clipper->flat) {
- const struct draw_vertex_shader *vs = stage->draw->vs.vertex_shader;
- uint i;
+ /* First pick up the interpolation mode for
+ * gl_Color/gl_SecondaryColor, with the correct default.
+ */
+ int indexed_interp[2];
+ indexed_interp[0] = indexed_interp[1] = stage->draw->rasterizer->flatshade ?
+ TGSI_INTERPOLATE_CONSTANT : TGSI_INTERPOLATE_PERSPECTIVE;
+
+ if (fs) {
+ for (i = 0; i < fs->info.num_inputs; i++) {
+ if (fs->info.input_semantic_name[i] == TGSI_SEMANTIC_COLOR) {
+ if (fs->info.input_interpolate[i] != TGSI_INTERPOLATE_COLOR)
+ indexed_interp[fs->info.input_semantic_index[i]] = fs->info.input_interpolate[i];
+ }
+ }
+ }
- clipper->num_color_attribs = 0;
- for (i = 0; i < vs->info.num_outputs; i++) {
- if (vs->info.output_semantic_name[i] == TGSI_SEMANTIC_COLOR ||
- vs->info.output_semantic_name[i] == TGSI_SEMANTIC_BCOLOR) {
- clipper->color_attribs[clipper->num_color_attribs++] = i;
- }
+ /* Then resolve the interpolation mode for every output attribute.
+ *
+ * Given how the rest of the code, the most efficient way is to
+ * have a vector of flat-mode attributes, and a mask for
+ * noperspective attributes.
+ */
+
+ clipper->num_flat_attribs = 0;
+ memset(clipper->noperspective_attribs, 0, sizeof(clipper->noperspective_attribs));
+ for (i = 0; i < vs->info.num_outputs; i++) {
+ /* Find the interpolation mode for a specific attribute
+ */
+ int interp;
+
+ /* If it's gl_{Front,Back}{,Secondary}Color, pick up the mode
+ * from the array we've filled before. */
+ if (vs->info.output_semantic_name[i] == TGSI_SEMANTIC_COLOR ||
+ vs->info.output_semantic_name[i] == TGSI_SEMANTIC_BCOLOR) {
+ interp = indexed_interp[vs->info.output_semantic_index[i]];
+ } else {
+ /* Otherwise, search in the FS inputs, with a decent default
+ * if we don't find it.
+ */
+ uint j;
+ interp = TGSI_INTERPOLATE_PERSPECTIVE;
+ if (fs) {
+ for (j = 0; j < fs->info.num_inputs; j++) {
+ if (vs->info.output_semantic_name[i] == fs->info.input_semantic_name[j] &&
+ vs->info.output_semantic_index[i] == fs->info.input_semantic_index[j]) {
+ interp = fs->info.input_interpolate[j];
+ break;
+ }
+ }
+ }
}
+
+ /* If it's flat, add it to the flat vector. Otherwise update
+ * the noperspective mask.
+ */
+ if (interp == TGSI_INTERPOLATE_CONSTANT) {
+ clipper->flat_attribs[clipper->num_flat_attribs] = i;
+ clipper->num_flat_attribs++;
+ } else
+ clipper->noperspective_attribs[i] = interp == TGSI_INTERPOLATE_LINEAR;
}
stage->tri = clip_tri;
*/
struct draw_stage *draw_clip_stage( struct draw_context *draw )
{
- struct clipper *clipper = CALLOC_STRUCT(clipper);
+ struct clip_stage *clipper = CALLOC_STRUCT(clip_stage);
if (clipper == NULL)
goto fail;
- if (!draw_alloc_temp_verts( &clipper->stage, MAX_CLIPPED_VERTICES+1 ))
- goto fail;
-
clipper->stage.draw = draw;
+ clipper->stage.name = "clipper";
clipper->stage.point = clip_point;
clipper->stage.line = clip_first_line;
clipper->stage.tri = clip_first_tri;
clipper->plane = draw->plane;
+ if (!draw_alloc_temp_verts( &clipper->stage, MAX_CLIPPED_VERTICES+1 ))
+ goto fail;
+
return &clipper->stage;
fail:
projects / mesa.git / blobdiff