aligned to 4. If false, there are no restrictions on src_offset.
* ``PIPE_CAP_COMPUTE``: Whether the implementation supports the
compute entry points defined in pipe_context and pipe_screen.
-* ``PIPE_CAP_USER_INDEX_BUFFERS``: Whether user index buffers are supported.
- If not, the state tracker must upload all indices which are not in hw
- resources. If user-space buffers are supported, the driver must also still
- accept HW resource buffers.
* ``PIPE_CAP_USER_CONSTANT_BUFFERS``: Whether user-space constant buffers
are supported. If not, the state tracker must put constants into HW
resources/buffers. If user-space constant buffers are supported, the
pipe_draw_info::indirect_stride and ::indirect_count
* ``PIPE_CAP_MULTI_DRAW_INDIRECT_PARAMS``: Whether the driver supports
taking the number of indirect draws from a separate parameter
- buffer, see pipe_draw_info::indirect_params.
+ buffer, see pipe_draw_indirect_info::indirect_draw_count.
* ``PIPE_CAP_TGSI_FS_FINE_DERIVATIVE``: Whether the fragment shader supports
the FINE versions of DDX/DDY.
* ``PIPE_CAP_VENDOR_ID``: The vendor ID of the underlying hardware. If it's
32-bit. If set to off, that means that a B5G6R5 + Z24 or RGBA8 + Z16
combination will require a driver fallback, and should not be
advertised in the GLX/EGL config list.
+* ``PIPE_CAP_TGSI_ARRAY_COMPONENTS``: If true, the driver interprets the
+ UsageMask of input and output declarations and allows declaring arrays
+ in overlapping ranges. The components must be a contiguous range, e.g. a
+ UsageMask of xy or yzw is allowed, but xz or yw isn't. Declarations with
+ overlapping locations must have matching semantic names and indices, and
+ equal interpolation qualifiers.
+ Components may overlap, notably when the gaps in an array of dvec3 are
+ filled in.
+* ``PIPE_CAP_STREAM_OUTPUT_INTERLEAVE_BUFFERS``: Whether interleaved stream
+ output mode is able to interleave across buffers. This is required for
+ ARB_transform_feedback3.
+* ``PIPE_CAP_TGSI_CAN_READ_OUTPUTS``: Whether every TGSI shader stage can read
+ from the output file.
+* ``PIPE_CAP_GLSL_OPTIMIZE_CONSERVATIVELY``: Tell the GLSL compiler to use
+ the minimum amount of optimizations just to be able to do all the linking
+ and lowering.
+* ``PIPE_CAP_TGSI_FS_FBFETCH``: Whether a fragment shader can use the FBFETCH
+ opcode to retrieve the current value in the framebuffer.
+* ``PIPE_CAP_TGSI_MUL_ZERO_WINS``: Whether TGSI shaders support the
+ ``TGSI_PROPERTY_MUL_ZERO_WINS`` shader property.
+* ``PIPE_CAP_DOUBLES``: Whether double precision floating-point operations
+ are supported.
+* ``PIPE_CAP_INT64``: Whether 64-bit integer operations are supported.
+* ``PIPE_CAP_INT64_DIVMOD``: Whether 64-bit integer division/modulo
+ operations are supported.
+* ``PIPE_CAP_TGSI_TEX_TXF_LZ``: Whether TEX_LZ and TXF_LZ opcodes are
+ supported.
+* ``PIPE_CAP_TGSI_CLOCK``: Whether the CLOCK opcode is supported.
+* ``PIPE_CAP_POLYGON_MODE_FILL_RECTANGLE``: Whether the
+ PIPE_POLYGON_MODE_FILL_RECTANGLE mode is supported for
+ ``pipe_rasterizer_state::fill_front`` and
+ ``pipe_rasterizer_state::fill_back``.
+* ``PIPE_CAP_SPARSE_BUFFER_PAGE_SIZE``: The page size of sparse buffers in
+ bytes, or 0 if sparse buffers are not supported. The page size must be at
+ most 64KB.
+* ``PIPE_CAP_TGSI_BALLOT``: Whether the BALLOT and READ_* opcodes as well as
+ the SUBGROUP_* semantics are supported.
+* ``PIPE_CAP_TGSI_TES_LAYER_VIEWPORT``: Whether ``TGSI_SEMANTIC_LAYER`` and
+ ``TGSI_SEMANTIC_VIEWPORT_INDEX`` are supported as tessellation evaluation
+ shader outputs.
+* ``PIPE_CAP_CAN_BIND_CONST_BUFFER_AS_VERTEX``: Whether a buffer with just
+ PIPE_BIND_CONSTANT_BUFFER can be legally passed to set_vertex_buffers.
+* ``PIPE_CAP_ALLOW_MAPPED_BUFFERS_DURING_EXECUTION``: As the name says.
+* ``PIPE_CAP_POST_DEPTH_COVERAGE``: whether
+ ``TGSI_PROPERTY_FS_POST_DEPTH_COVERAGE`` is supported.
+* ``PIPE_CAP_BINDLESS_TEXTURE``: Whether bindless texture operations are
+ supported.
+* ``PIPE_CAP_NIR_SAMPLERS_AS_DEREF``: Whether NIR tex instructions should
+ reference texture and sampler as NIR derefs instead of by indices.
+* ``PIPE_CAP_QUERY_SO_OVERFLOW``: Whether the
+ ``PIPE_QUERY_SO_OVERFLOW_PREDICATE`` and
+ ``PIPE_QUERY_SO_OVERFLOW_ANY_PREDICATE`` query types are supported. Note that
+ for a driver that does not support multiple output streams (i.e.,
+ ``PIPE_CAP_MAX_VERTEX_STREAMS`` is 1), both query types are identical.
+* ``PIPE_CAP_MEMOBJ``: Whether operations on memory objects are supported.
+* ``PIPE_CAP_LOAD_CONSTBUF``: True if the driver supports TGSI_OPCODE_LOAD use
+ with constant buffers.
.. _pipe_capf:
* ``PIPE_SHADER_CAP_MAX_CONST_BUFFER_SIZE``: The maximum size per constant buffer in bytes.
* ``PIPE_SHADER_CAP_MAX_CONST_BUFFERS``: Maximum number of constant buffers that can be bound
to any shader stage using ``set_constant_buffer``. If 0 or 1, the pipe will
- only permit binding one constant buffer per shader, and the shaders will
- not permit two-dimensional access to constants.
+ only permit binding one constant buffer per shader.
If a value greater than 0 is returned, the driver can have multiple
-constant buffers bound to shader stages. The CONST register file can
-be accessed with two-dimensional indices, like in the example below.
+constant buffers bound to shader stages. The CONST register file is
+accessed with two-dimensional indices, like in the example below.
DCL CONST[0][0..7] # declare first 8 vectors of constbuf 0
DCL CONST[3][0] # declare first vector of constbuf 3
MOV OUT[0], CONST[0][3] # copy vector 3 of constbuf 0
-For backwards compatibility, one-dimensional access to CONST register
-file is still supported. In that case, the constbuf index is assumed
-to be 0.
-
* ``PIPE_SHADER_CAP_MAX_TEMPS``: The maximum number of temporary registers.
-* ``PIPE_SHADER_CAP_MAX_PREDS``: The maximum number of predicate registers.
* ``PIPE_SHADER_CAP_TGSI_CONT_SUPPORTED``: Whether the continue opcode is supported.
* ``PIPE_SHADER_CAP_INDIRECT_INPUT_ADDR``: Whether indirect addressing
of the input file is supported.
BGNSUB, ENDSUB, CAL, and RET, including RET in the main block.
* ``PIPE_SHADER_CAP_INTEGERS``: Whether integer opcodes are supported.
If unsupported, only float opcodes are supported.
+* ``PIPE_SHADER_CAP_FP16``: Whether half precision floating-point opcodes are supported.
+ If unsupported, half precision ops need to be lowered to full precision.
* ``PIPE_SHADER_CAP_MAX_TEXTURE_SAMPLERS``: The maximum number of texture
samplers.
* ``PIPE_SHADER_CAP_PREFERRED_IR``: Preferred representation of the
program. It should be one of the ``pipe_shader_ir`` enum values.
* ``PIPE_SHADER_CAP_MAX_SAMPLER_VIEWS``: The maximum number of texture
sampler views. Must not be lower than PIPE_SHADER_CAP_MAX_TEXTURE_SAMPLERS.
-* ``PIPE_SHADER_CAP_DOUBLES``: Whether double precision floating-point
- operations are supported.
* ``PIPE_SHADER_CAP_TGSI_DROUND_SUPPORTED``: Whether double precision rounding
is supported. If it is, DTRUNC/DCEIL/DFLR/DROUND opcodes may be used.
* ``PIPE_SHADER_CAP_TGSI_DFRACEXP_DLDEXP_SUPPORTED``: Whether DFRACEXP and
* ``PIPE_SHADER_CAP_SUPPORTED_IRS``: Supported representations of the
program. It should be a mask of ``pipe_shader_ir`` bits.
* ``PIPE_SHADER_CAP_MAX_SHADER_IMAGES``: Maximum number of image units.
+* ``PIPE_SHADER_CAP_LOWER_IF_THRESHOLD``: IF and ELSE branches with a lower
+ cost than this value should be lowered by the state tracker for better
+ performance. This is a tunable for the GLSL compiler and the behavior is
+ specific to the compiler.
+* ``PIPE_SHADER_CAP_TGSI_SKIP_MERGE_REGISTERS``: Whether the merge registers
+ TGSI pass is skipped. This might reduce code size and register pressure if
+ the underlying driver has a real backend compiler.
.. _pipe_compute_cap:
threads. Also known as wavefront size, warp size or SIMD width.
* ``PIPE_COMPUTE_CAP_ADDRESS_BITS``: The default compute device address space
size specified as an unsigned integer value in bits.
+* ``PIPE_COMPUTE_CAP_MAX_VARIABLE_THREADS_PER_BLOCK``: Maximum variable number
+ of threads that a single block can contain. This is similar to
+ PIPE_COMPUTE_CAP_MAX_THREADS_PER_BLOCK, except that the variable size is not
+ known a compile-time but at dispatch-time.
.. _pipe_bind:
Returns an identifying name for the screen.
+The returned string should remain valid and immutable for the lifetime of
+pipe_screen.
+
get_vendor
^^^^^^^^^^
Returns the screen vendor.
+The returned string should remain valid and immutable for the lifetime of
+pipe_screen.
+
get_device_vendor
^^^^^^^^^^^^^^^^^
Returns the actual vendor of the device driving the screen
(as opposed to the driver vendor).
+The returned string should remain valid and immutable for the lifetime of
+pipe_screen.
+
.. _get_param:
get_param
**bindings** is a bitmask of :ref:`PIPE_BIND` flags.
-**geom_flags** is a bitmask of PIPE_TEXTURE_GEOM_x flags.
-
Returns TRUE if all usages can be satisfied.
+resource_changed
+^^^^^^^^^^^^^^^^
+
+Mark a resource as changed so derived internal resources will be recreated
+on next use.
+
+When importing external images that can't be directly used as texture sampler
+source, internal copies may have to be created that the hardware can sample
+from. When those resources are reimported, the image data may have changed, and
+the previously derived internal resources must be invalidated to avoid sampling
+from old copies.
+
+
+
resource_destroy
^^^^^^^^^^^^^^^^
The function returns non-zero on success.
The driver-specific query group is described with the
pipe_driver_query_group_info structure.
+
+
+
+get_disk_shader_cache
+^^^^^^^^^^^^^^^^^^^^^
+
+Returns a pointer to a driver-specific on-disk shader cache. If the driver
+failed to create the cache or does not support an on-disk shader cache NULL is
+returned. The callback itself may also be NULL if the driver doesn't support
+an on-disk shader cache.
+
+
+Thread safety
+-------------
+
+Screen methods are required to be thread safe. While gallium rendering
+contexts are not required to be thread safe, it is required to be safe to use
+different contexts created with the same screen in different threads without
+locks. It is also required to be safe using screen methods in a thread, while
+using one of its contexts in another (without locks).
projects / mesa.git / blobdiff