#include "etnaviv_surface.h"
#include "etnaviv_translate.h"
#include "etnaviv_util.h"
+#include "util/u_framebuffer.h"
#include "util/u_helpers.h"
#include "util/u_inlines.h"
#include "util/u_math.h"
/* Set up TS as well. Warning: this state is used by both the RS and PE */
uint32_t ts_mem_config = 0;
+ uint32_t pe_mem_config = 0;
if (sv->nr_cbufs > 0) { /* at least one color buffer? */
struct etna_surface *cbuf = etna_surface(sv->cbufs[0]);
assert(res->layout & ETNA_LAYOUT_BIT_TILE); /* Cannot render to linear surfaces */
etna_update_render_resource(pctx, cbuf->base.texture);
- pipe_surface_reference(&cs->cbuf, &cbuf->base);
cs->PE_COLOR_FORMAT =
VIVS_PE_COLOR_FORMAT_FORMAT(translate_rs_format(cbuf->base.format)) |
VIVS_PE_COLOR_FORMAT_COMPONENTS__MASK |
VIVS_PE_COLOR_FORMAT_OVERWRITE |
- COND(color_supertiled, VIVS_PE_COLOR_FORMAT_SUPER_TILED);
+ COND(color_supertiled, VIVS_PE_COLOR_FORMAT_SUPER_TILED) |
+ COND(color_supertiled && ctx->specs.halti >= 5, VIVS_PE_COLOR_FORMAT_SUPER_TILED_NEW);
/* VIVS_PE_COLOR_FORMAT_COMPONENTS() and
* VIVS_PE_COLOR_FORMAT_OVERWRITE comes from blend_state
* but only if we set the bits above. */
cs->TS_COLOR_SURFACE_BASE = cbuf->reloc[0];
cs->TS_COLOR_SURFACE_BASE.flags = ETNA_RELOC_READ | ETNA_RELOC_WRITE;
+
+ pe_mem_config |= VIVS_PE_MEM_CONFIG_COLOR_TS_MODE(cbuf->level->ts_mode);
}
/* MSAA */
nr_samples_color = cbuf->base.texture->nr_samples;
} else {
- pipe_surface_reference(&cs->cbuf, NULL);
/* Clearing VIVS_PE_COLOR_FORMAT_COMPONENTS__MASK and
* VIVS_PE_COLOR_FORMAT_OVERWRITE prevents us from overwriting the
* color target */
- cs->PE_COLOR_FORMAT = 0;
+ cs->PE_COLOR_FORMAT = VIVS_PE_COLOR_FORMAT_OVERWRITE;
cs->PE_COLOR_STRIDE = 0;
cs->TS_COLOR_STATUS_BASE.bo = NULL;
cs->TS_COLOR_SURFACE_BASE.bo = NULL;
- for (int i = 0; i < ETNA_MAX_PIXELPIPES; i++)
- cs->PE_PIPE_COLOR_ADDR[i].bo = NULL;
+ cs->PE_COLOR_ADDR = ctx->dummy_rt_reloc;
+ for (int i = 0; i < ctx->specs.pixel_pipes; i++)
+ cs->PE_PIPE_COLOR_ADDR[i] = ctx->dummy_rt_reloc;
}
if (sv->zsbuf != NULL) {
etna_update_render_resource(pctx, zsbuf->base.texture);
- pipe_surface_reference(&cs->zsbuf, &zsbuf->base);
assert(res->layout &ETNA_LAYOUT_BIT_TILE); /* Cannot render to linear surfaces */
uint32_t depth_format = translate_depth_format(zsbuf->base.format);
cs->PE_DEPTH_CONFIG =
depth_format |
COND(depth_supertiled, VIVS_PE_DEPTH_CONFIG_SUPER_TILED) |
- VIVS_PE_DEPTH_CONFIG_DEPTH_MODE_Z;
+ VIVS_PE_DEPTH_CONFIG_DEPTH_MODE_Z |
+ COND(ctx->specs.halti >= 5, VIVS_PE_DEPTH_CONFIG_DISABLE_ZS) /* Needs to be enabled on GC7000, otherwise depth writes hang w/ TS - apparently it does something else now */
+ ;
/* VIVS_PE_DEPTH_CONFIG_ONLY_DEPTH */
/* merged with depth_stencil_alpha */
cs->TS_DEPTH_SURFACE_BASE = zsbuf->reloc[0];
cs->TS_DEPTH_SURFACE_BASE.flags = ETNA_RELOC_READ | ETNA_RELOC_WRITE;
+
+ pe_mem_config |= VIVS_PE_MEM_CONFIG_DEPTH_TS_MODE(zsbuf->level->ts_mode);
}
ts_mem_config |= COND(depth_bits == 16, VIVS_TS_MEM_CONFIG_DEPTH_16BPP);
nr_samples_depth = zsbuf->base.texture->nr_samples;
} else {
- pipe_surface_reference(&cs->zsbuf, NULL);
cs->PE_DEPTH_CONFIG = VIVS_PE_DEPTH_CONFIG_DEPTH_MODE_NONE;
cs->PE_DEPTH_ADDR.bo = NULL;
cs->PE_DEPTH_STRIDE = 0;
cs->SE_CLIP_BOTTOM = (sv->height << 16) + ETNA_SE_CLIP_MARGIN_BOTTOM;
cs->TS_MEM_CONFIG = ts_mem_config;
+ cs->PE_MEM_CONFIG = pe_mem_config;
/* Single buffer setup. There is only one switch for this, not a separate
* one per color buffer / depth buffer. To keep the logic simple always use
* single buffer when this feature is available.
*/
- cs->PE_LOGIC_OP = VIVS_PE_LOGIC_OP_SINGLE_BUFFER(ctx->specs.single_buffer ? 2 : 0);
+ cs->PE_LOGIC_OP = VIVS_PE_LOGIC_OP_SINGLE_BUFFER(ctx->specs.single_buffer ? 3 : 0);
- ctx->framebuffer_s = *sv; /* keep copy of original structure */
+ /* keep copy of original structure */
+ util_copy_framebuffer_state(&ctx->framebuffer_s, sv);
ctx->dirty |= ETNA_DIRTY_FRAMEBUFFER | ETNA_DIRTY_DERIVE_TS;
}
assert(format_type != ETNA_NO_MATCH);
assert(normalize != ETNA_NO_MATCH);
- cs->FE_VERTEX_ELEMENT_CONFIG[idx] =
- COND(nonconsecutive, VIVS_FE_VERTEX_ELEMENT_CONFIG_NONCONSECUTIVE) |
- format_type |
- VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM(util_format_get_nr_components(elements[idx].src_format)) |
- normalize | VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN(ENDIAN_MODE_NO_SWAP) |
- VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM(elements[idx].vertex_buffer_index) |
- VIVS_FE_VERTEX_ELEMENT_CONFIG_START(elements[idx].src_offset) |
- VIVS_FE_VERTEX_ELEMENT_CONFIG_END(end_offset - start_offset);
+ if (ctx->specs.halti < 5) {
+ cs->FE_VERTEX_ELEMENT_CONFIG[idx] =
+ COND(nonconsecutive, VIVS_FE_VERTEX_ELEMENT_CONFIG_NONCONSECUTIVE) |
+ format_type |
+ VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM(util_format_get_nr_components(elements[idx].src_format)) |
+ normalize | VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN(ENDIAN_MODE_NO_SWAP) |
+ VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM(elements[idx].vertex_buffer_index) |
+ VIVS_FE_VERTEX_ELEMENT_CONFIG_START(elements[idx].src_offset) |
+ VIVS_FE_VERTEX_ELEMENT_CONFIG_END(end_offset - start_offset);
+ } else { /* HALTI5 spread vertex attrib config over two registers */
+ cs->NFE_GENERIC_ATTRIB_CONFIG0[idx] =
+ format_type |
+ VIVS_NFE_GENERIC_ATTRIB_CONFIG0_NUM(util_format_get_nr_components(elements[idx].src_format)) |
+ normalize | VIVS_NFE_GENERIC_ATTRIB_CONFIG0_ENDIAN(ENDIAN_MODE_NO_SWAP) |
+ VIVS_NFE_GENERIC_ATTRIB_CONFIG0_STREAM(elements[idx].vertex_buffer_index) |
+ VIVS_NFE_GENERIC_ATTRIB_CONFIG0_START(elements[idx].src_offset);
+ cs->NFE_GENERIC_ATTRIB_CONFIG1[idx] =
+ COND(nonconsecutive, VIVS_NFE_GENERIC_ATTRIB_CONFIG1_NONCONSECUTIVE) |
+ VIVS_NFE_GENERIC_ATTRIB_CONFIG1_END(end_offset - start_offset);
+ }
+ cs->NFE_GENERIC_ATTRIB_SCALE[idx] = 0x3f800000; /* 1 for integer, 1.0 for float */
}
return cs;
}
}
- if (new_ts_config != ctx->framebuffer.TS_MEM_CONFIG) {
+ if (new_ts_config != ctx->framebuffer.TS_MEM_CONFIG ||
+ (ctx->dirty & ETNA_DIRTY_FRAMEBUFFER)) {
ctx->framebuffer.TS_MEM_CONFIG = new_ts_config;
ctx->dirty |= ETNA_DIRTY_TS;
}