#ifndef IR3_SHADER_H_
#define IR3_SHADER_H_
+#include "pipe/p_state.h"
+#include "compiler/shader_enums.h"
+#include "util/bitscan.h"
+
#include "ir3.h"
#include "disasm.h"
-typedef uint16_t ir3_semantic; /* semantic name + index */
-static inline ir3_semantic
-ir3_semantic_name(uint8_t name, uint16_t index)
-{
- return (name << 8) | (index & 0xff);
-}
+struct glsl_type;
+
+/* driver param indices: */
+enum ir3_driver_param {
+ /* compute shader driver params: */
+ IR3_DP_NUM_WORK_GROUPS_X = 0,
+ IR3_DP_NUM_WORK_GROUPS_Y = 1,
+ IR3_DP_NUM_WORK_GROUPS_Z = 2,
+ IR3_DP_LOCAL_GROUP_SIZE_X = 4,
+ IR3_DP_LOCAL_GROUP_SIZE_Y = 5,
+ IR3_DP_LOCAL_GROUP_SIZE_Z = 6,
+ /* NOTE: gl_NumWorkGroups should be vec4 aligned because
+ * glDispatchComputeIndirect() needs to load these from
+ * the info->indirect buffer. Keep that in mind when/if
+ * adding any addition CS driver params.
+ */
+ IR3_DP_CS_COUNT = 8, /* must be aligned to vec4 */
+
+ /* vertex shader driver params: */
+ IR3_DP_VTXID_BASE = 0,
+ IR3_DP_VTXCNT_MAX = 1,
+ /* user-clip-plane components, up to 8x vec4's: */
+ IR3_DP_UCP0_X = 4,
+ /* .... */
+ IR3_DP_UCP7_W = 35,
+ IR3_DP_VS_COUNT = 36 /* must be aligned to vec4 */
+};
-static inline uint8_t sem2name(ir3_semantic sem)
-{
- return sem >> 8;
-}
+/**
+ * For consts needed to pass internal values to shader which may or may not
+ * be required, rather than allocating worst-case const space, we scan the
+ * shader and allocate consts as-needed:
+ *
+ * + SSBO sizes: only needed if shader has a get_buffer_size intrinsic
+ * for a given SSBO
+ *
+ * + Image dimensions: needed to calculate pixel offset, but only for
+ * images that have a image_store intrinsic
+ */
+struct ir3_driver_const_layout {
+ struct {
+ uint32_t mask; /* bitmask of SSBOs that have get_buffer_size */
+ uint32_t count; /* number of consts allocated */
+ /* one const allocated per SSBO which has get_buffer_size,
+ * ssbo_sizes.off[ssbo_id] is offset from start of ssbo_sizes
+ * consts:
+ */
+ uint32_t off[PIPE_MAX_SHADER_BUFFERS];
+ } ssbo_size;
-static inline uint16_t sem2idx(ir3_semantic sem)
-{
- return sem & 0xff;
-}
+ struct {
+ uint32_t mask; /* bitmask of images that have image_store */
+ uint32_t count; /* number of consts allocated */
+ /* three const allocated per image which has image_store:
+ * + cpp (bytes per pixel)
+ * + pitch (y pitch)
+ * + array_pitch (z pitch)
+ */
+ uint32_t off[PIPE_MAX_SHADER_IMAGES];
+ } image_dims;
+};
/* Configuration key used to identify a shader variant.. different
* shader variants can be used to implement features not supported
struct ir3_shader_key {
union {
struct {
+ /*
+ * Combined Vertex/Fragment shader parameters:
+ */
+ unsigned ucp_enables : 8;
+
/* do we need to check {v,f}saturate_{s,t,r}? */
unsigned has_per_samp : 1;
* Vertex shader variant parameters:
*/
unsigned binning_pass : 1;
+ unsigned vclamp_color : 1;
/*
* Fragment shader variant parameters:
*/
unsigned color_two_side : 1;
unsigned half_precision : 1;
- /* used when shader needs to handle flat varyings (a4xx),
- * for TGSI_INTERPOLATE_COLOR:
+ /* used when shader needs to handle flat varyings (a4xx)
+ * for front/back color inputs to frag shader:
*/
unsigned rasterflat : 1;
+ unsigned fclamp_color : 1;
};
uint32_t global;
};
* shader:
*/
uint16_t fsaturate_s, fsaturate_t, fsaturate_r;
+
+ /* bitmask of ms shifts */
+ uint32_t vsamples, fsamples;
+
+ /* bitmask of samplers which need astc srgb workaround: */
+ uint16_t vastc_srgb, fastc_srgb;
};
static inline bool
return a->global == b->global;
}
+/* will the two keys produce different lowering for a fragment shader? */
+static inline bool
+ir3_shader_key_changes_fs(struct ir3_shader_key *key, struct ir3_shader_key *last_key)
+{
+ if (last_key->has_per_samp || key->has_per_samp) {
+ if ((last_key->fsaturate_s != key->fsaturate_s) ||
+ (last_key->fsaturate_t != key->fsaturate_t) ||
+ (last_key->fsaturate_r != key->fsaturate_r) ||
+ (last_key->fsamples != key->fsamples) ||
+ (last_key->fastc_srgb != key->fastc_srgb))
+ return true;
+ }
+
+ if (last_key->fclamp_color != key->fclamp_color)
+ return true;
+
+ if (last_key->color_two_side != key->color_two_side)
+ return true;
+
+ if (last_key->half_precision != key->half_precision)
+ return true;
+
+ if (last_key->rasterflat != key->rasterflat)
+ return true;
+
+ if (last_key->ucp_enables != key->ucp_enables)
+ return true;
+
+ return false;
+}
+
+/* will the two keys produce different lowering for a vertex shader? */
+static inline bool
+ir3_shader_key_changes_vs(struct ir3_shader_key *key, struct ir3_shader_key *last_key)
+{
+ if (last_key->has_per_samp || key->has_per_samp) {
+ if ((last_key->vsaturate_s != key->vsaturate_s) ||
+ (last_key->vsaturate_t != key->vsaturate_t) ||
+ (last_key->vsaturate_r != key->vsaturate_r) ||
+ (last_key->vsamples != key->vsamples) ||
+ (last_key->vastc_srgb != key->vastc_srgb))
+ return true;
+ }
+
+ if (last_key->vclamp_color != key->vclamp_color)
+ return true;
+
+ if (last_key->ucp_enables != key->ucp_enables)
+ return true;
+
+ return false;
+}
+
struct ir3_shader_variant {
struct fd_bo *bo;
struct ir3_shader_key key;
+ struct ir3_driver_const_layout const_layout;
struct ir3_info info;
struct ir3 *ir;
*/
unsigned constlen;
+ /* number of uniforms (in vec4), not including built-in compiler
+ * constants, etc.
+ */
+ unsigned num_uniforms;
+
+ unsigned num_ubos;
+
/* About Linkage:
* + Let the frag shader determine the position/compmask for the
* varyings, since it is the place where we know if the varying
* + From the vert shader, we only need the output regid
*/
- /* for frag shader, pos_regid holds the frag_pos, ie. what is passed
- * to bary.f instructions
- */
- uint8_t pos_regid;
bool frag_coord, frag_face, color0_mrt;
+ /* NOTE: for input/outputs, slot is:
+ * gl_vert_attrib - for VS inputs
+ * gl_varying_slot - for VS output / FS input
+ * gl_frag_result - for FS output
+ */
+
/* varyings/outputs: */
unsigned outputs_count;
struct {
- ir3_semantic semantic;
+ uint8_t slot;
uint8_t regid;
} outputs[16 + 2]; /* +POSITION +PSIZE */
bool writes_pos, writes_psize;
- /* vertices/inputs: */
+ /* attributes (VS) / varyings (FS):
+ * Note that sysval's should come *after* normal inputs.
+ */
unsigned inputs_count;
struct {
- ir3_semantic semantic;
+ uint8_t slot;
uint8_t regid;
uint8_t compmask;
uint8_t ncomp;
- /* In theory inloc of fs should match outloc of vs. Or
- * rather the outloc of the vs is 8 plus the offset passed
- * to bary.f. Presumably that +8 is to account for
- * gl_Position/gl_PointSize?
- *
- * NOTE inloc is currently aligned to 4 (we don't try
- * to pack varyings). Changing this would likely break
- * assumptions in few places (like setting up of flat
- * shading in fd3_program) so be sure to check all the
- * spots where inloc is used.
+ /* location of input (ie. offset passed to bary.f, etc). This
+ * matches the SP_VS_VPC_DST_REG.OUTLOCn value (a3xx and a4xx
+ * have the OUTLOCn value offset by 8, presumably to account
+ * for gl_Position/gl_PointSize)
*/
uint8_t inloc;
- uint8_t bary;
- uint8_t interpolate;
+ /* vertex shader specific: */
+ bool sysval : 1; /* slot is a gl_system_value */
+ /* fragment shader specific: */
+ bool bary : 1; /* fetched varying (vs one loaded into reg) */
+ bool rasterflat : 1; /* special handling for emit->rasterflat */
+ enum glsl_interp_mode interpolate;
} inputs[16 + 2]; /* +POSITION +FACE */
- unsigned total_in; /* sum of inputs (scalar) */
+ /* sum of input components (scalar). For frag shaders, it only counts
+ * the varying inputs:
+ */
+ unsigned total_in;
+
+ /* For frag shaders, the total number of inputs (not scalar,
+ * ie. SP_VS_PARAM_REG.TOTALVSOUTVAR)
+ */
+ unsigned varying_in;
/* do we have one or more texture sample instructions: */
bool has_samp;
+ /* do we have one or more SSBO instructions: */
+ bool has_ssbo;
+
/* do we have kill instructions: */
bool has_kill;
- /* const reg # of first immediate, ie. 1 == c1
- * (not regid, because TGSI thinks in terms of vec4 registers,
- * not scalar registers)
+ /* Layout of constant registers, each section (in vec4). Pointer size
+ * is 32b (a3xx, a4xx), or 64b (a5xx+), which effects the size of the
+ * UBO and stream-out consts.
*/
- unsigned first_driver_param;
- unsigned first_immediate;
+ struct {
+ /* user const start at zero */
+ unsigned ubo;
+ /* NOTE that a3xx might need a section for SSBO addresses too */
+ unsigned ssbo_sizes;
+ unsigned image_dims;
+ unsigned driver_param;
+ unsigned tfbo;
+ unsigned immediate;
+ } constbase;
+
unsigned immediates_count;
struct {
uint32_t val[4];
} immediates[64];
+ /* for astc srgb workaround, the number/base of additional
+ * alpha tex states we need, and index of original tex states
+ */
+ struct {
+ unsigned base, count;
+ unsigned orig_idx[16];
+ } astc_srgb;
+
/* shader variants form a linked list: */
struct ir3_shader_variant *next;
struct ir3_shader *shader;
};
+typedef struct nir_shader nir_shader;
+
struct ir3_shader {
enum shader_t type;
uint32_t id;
uint32_t variant_count;
+ /* so we know when we can disable TGSI related hacks: */
+ bool from_tgsi;
+
struct ir3_compiler *compiler;
- struct pipe_context *pctx;
- const struct tgsi_token *tokens;
+ nir_shader *nir;
+ struct pipe_stream_output_info stream_output;
struct ir3_shader_variant *variants;
-
- /* so far, only used for blit_prog shader.. values for
- * VPC_VARYING_PS_REPL[i].MODE
- */
- uint32_t vpsrepl[8];
};
void * ir3_shader_assemble(struct ir3_shader_variant *v, uint32_t gpu_id);
-struct ir3_shader * ir3_shader_create(struct pipe_context *pctx,
- const struct tgsi_token *tokens, enum shader_t type);
+struct ir3_shader * ir3_shader_create(struct ir3_compiler *compiler,
+ const struct pipe_shader_state *cso, enum shader_t type,
+ struct pipe_debug_callback *debug);
+struct ir3_shader *
+ir3_shader_create_compute(struct ir3_compiler *compiler,
+ const struct pipe_compute_state *cso,
+ struct pipe_debug_callback *debug);
void ir3_shader_destroy(struct ir3_shader *shader);
struct ir3_shader_variant * ir3_shader_variant(struct ir3_shader *shader,
- struct ir3_shader_key key);
-void ir3_shader_disasm(struct ir3_shader_variant *so, uint32_t *bin);
+ struct ir3_shader_key key, struct pipe_debug_callback *debug);
+void ir3_shader_disasm(struct ir3_shader_variant *so, uint32_t *bin, FILE *out);
+uint64_t ir3_shader_outputs(const struct ir3_shader *so);
+
+struct fd_ringbuffer;
+struct fd_context;
+void ir3_emit_vs_consts(const struct ir3_shader_variant *v, struct fd_ringbuffer *ring,
+ struct fd_context *ctx, const struct pipe_draw_info *info);
+void ir3_emit_fs_consts(const struct ir3_shader_variant *v, struct fd_ringbuffer *ring,
+ struct fd_context *ctx);
+void ir3_emit_cs_consts(const struct ir3_shader_variant *v, struct fd_ringbuffer *ring,
+ struct fd_context *ctx, const struct pipe_grid_info *info);
+
+int
+ir3_glsl_type_size(const struct glsl_type *type);
static inline const char *
ir3_shader_stage(struct ir3_shader *shader)
#include "pipe/p_shader_tokens.h"
static inline int
-ir3_find_output(const struct ir3_shader_variant *so, ir3_semantic semantic)
+ir3_find_output(const struct ir3_shader_variant *so, gl_varying_slot slot)
{
int j;
for (j = 0; j < so->outputs_count; j++)
- if (so->outputs[j].semantic == semantic)
+ if (so->outputs[j].slot == slot)
return j;
/* it seems optional to have a OUT.BCOLOR[n] for each OUT.COLOR[n]
* OUT.COLOR[n] to IN.BCOLOR[n]. And visa versa if there is only
* a OUT.BCOLOR[n] but no matching OUT.COLOR[n]
*/
- if (sem2name(semantic) == TGSI_SEMANTIC_BCOLOR) {
- unsigned idx = sem2idx(semantic);
- semantic = ir3_semantic_name(TGSI_SEMANTIC_COLOR, idx);
- } else if (sem2name(semantic) == TGSI_SEMANTIC_COLOR) {
- unsigned idx = sem2idx(semantic);
- semantic = ir3_semantic_name(TGSI_SEMANTIC_BCOLOR, idx);
+ if (slot == VARYING_SLOT_BFC0) {
+ slot = VARYING_SLOT_COL0;
+ } else if (slot == VARYING_SLOT_BFC1) {
+ slot = VARYING_SLOT_COL1;
+ } else if (slot == VARYING_SLOT_COL0) {
+ slot = VARYING_SLOT_BFC0;
+ } else if (slot == VARYING_SLOT_COL1) {
+ slot = VARYING_SLOT_BFC1;
} else {
return 0;
}
for (j = 0; j < so->outputs_count; j++)
- if (so->outputs[j].semantic == semantic)
+ if (so->outputs[j].slot == slot)
return j;
debug_assert(0);
return i;
}
+struct ir3_shader_linkage {
+ uint8_t max_loc;
+ uint8_t cnt;
+ struct {
+ uint8_t regid;
+ uint8_t compmask;
+ uint8_t loc;
+ } var[32];
+};
+
+static inline void
+ir3_link_add(struct ir3_shader_linkage *l, uint8_t regid, uint8_t compmask, uint8_t loc)
+{
+ int i = l->cnt++;
+
+ debug_assert(i < ARRAY_SIZE(l->var));
+
+ l->var[i].regid = regid;
+ l->var[i].compmask = compmask;
+ l->var[i].loc = loc;
+ l->max_loc = MAX2(l->max_loc, loc + util_last_bit(compmask));
+}
+
+static inline void
+ir3_link_shaders(struct ir3_shader_linkage *l,
+ const struct ir3_shader_variant *vs,
+ const struct ir3_shader_variant *fs)
+{
+ int j = -1, k;
+
+ while (l->cnt < ARRAY_SIZE(l->var)) {
+ j = ir3_next_varying(fs, j);
+
+ if (j >= fs->inputs_count)
+ break;
+
+ if (fs->inputs[j].inloc >= fs->total_in)
+ continue;
+
+ k = ir3_find_output(vs, fs->inputs[j].slot);
+
+ ir3_link_add(l, vs->outputs[k].regid,
+ fs->inputs[j].compmask, fs->inputs[j].inloc);
+ }
+}
+
static inline uint32_t
-ir3_find_output_regid(const struct ir3_shader_variant *so, ir3_semantic semantic)
+ir3_find_output_regid(const struct ir3_shader_variant *so, unsigned slot)
{
int j;
for (j = 0; j < so->outputs_count; j++)
- if (so->outputs[j].semantic == semantic)
+ if (so->outputs[j].slot == slot)
return so->outputs[j].regid;
return regid(63, 0);
}
+static inline uint32_t
+ir3_find_sysval_regid(const struct ir3_shader_variant *so, unsigned slot)
+{
+ int j;
+ for (j = 0; j < so->inputs_count; j++)
+ if (so->inputs[j].sysval && (so->inputs[j].slot == slot))
+ return so->inputs[j].regid;
+ return regid(63, 0);
+}
+
+/* calculate register footprint in terms of half-regs (ie. one full
+ * reg counts as two half-regs).
+ */
+static inline uint32_t
+ir3_shader_halfregs(const struct ir3_shader_variant *v)
+{
+ return (2 * (v->info.max_reg + 1)) + (v->info.max_half_reg + 1);
+}
+
#endif /* IR3_SHADER_H_ */
projects / mesa.git / blobdiff