#include "draw/draw_private.h"
#include "lp_context.h"
#include "lp_screen.h"
-#include "lp_tex_cache.h"
+#include "lp_setup.h"
#include "lp_state.h"
-/**
- * Mark the current vertex layout as "invalid".
- * We'll validate the vertex layout later, when we start to actually
- * render a point or line or tri.
- */
-static void
-invalidate_vertex_layout(struct llvmpipe_context *llvmpipe)
-{
- llvmpipe->vertex_info.num_attribs = 0;
-}
-
/**
* The vertex info describes how to convert the post-transformed vertices
* (simple float[][4]) used by the 'draw' module into vertices for
* rasterization.
*
- * This function validates the vertex layout and returns a pointer to a
- * vertex_info object.
+ * This function validates the vertex layout.
*/
-struct vertex_info *
-llvmpipe_get_vertex_info(struct llvmpipe_context *llvmpipe)
+static void
+compute_vertex_info(struct llvmpipe_context *llvmpipe)
{
+ const struct lp_fragment_shader *lpfs = llvmpipe->fs;
struct vertex_info *vinfo = &llvmpipe->vertex_info;
+ unsigned vs_index;
+ uint i;
+
+ llvmpipe->color_slot[0] = -1;
+ llvmpipe->color_slot[1] = -1;
+ llvmpipe->bcolor_slot[0] = -1;
+ llvmpipe->bcolor_slot[1] = -1;
+
+ /*
+ * Match FS inputs against VS outputs, emitting the necessary
+ * attributes. Could cache these structs and look them up with a
+ * combination of fragment shader, vertex shader ids.
+ */
- if (vinfo->num_attribs == 0) {
- /* compute vertex layout now */
- const struct lp_fragment_shader *lpfs = llvmpipe->fs;
- struct vertex_info *vinfo_vbuf = &llvmpipe->vertex_info_vbuf;
- const uint num = draw_current_shader_outputs(llvmpipe->draw);
- uint i;
+ vinfo->num_attribs = 0;
- /* Tell draw_vbuf to simply emit the whole post-xform vertex
- * as-is. No longer any need to try and emit draw vertex_header
- * info.
- */
- vinfo_vbuf->num_attribs = 0;
- for (i = 0; i < num; i++) {
- draw_emit_vertex_attr(vinfo_vbuf, EMIT_4F, INTERP_PERSPECTIVE, i);
- }
- draw_compute_vertex_size(vinfo_vbuf);
+ vs_index = draw_find_shader_output(llvmpipe->draw,
+ TGSI_SEMANTIC_POSITION,
+ 0);
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE, vs_index);
+
+ for (i = 0; i < lpfs->info.base.num_inputs; i++) {
/*
- * Loop over fragment shader inputs, searching for the matching output
- * from the vertex shader.
+ * Search for each input in current vs output:
*/
- vinfo->num_attribs = 0;
- for (i = 0; i < lpfs->info.num_inputs; i++) {
- int src;
- enum interp_mode interp;
-
- switch (lpfs->info.input_interpolate[i]) {
- case TGSI_INTERPOLATE_CONSTANT:
- interp = INTERP_CONSTANT;
- break;
- case TGSI_INTERPOLATE_LINEAR:
- interp = INTERP_LINEAR;
- break;
- case TGSI_INTERPOLATE_PERSPECTIVE:
- interp = INTERP_PERSPECTIVE;
- break;
- default:
- assert(0);
- interp = INTERP_LINEAR;
- }
-
- switch (lpfs->info.input_semantic_name[i]) {
- case TGSI_SEMANTIC_POSITION:
- interp = INTERP_POS;
- break;
-
- case TGSI_SEMANTIC_COLOR:
- if (llvmpipe->rasterizer->flatshade) {
- interp = INTERP_CONSTANT;
- }
- break;
- }
-
- /* this includes texcoords and varying vars */
- src = draw_find_shader_output(llvmpipe->draw,
- lpfs->info.input_semantic_name[i],
- lpfs->info.input_semantic_index[i]);
- draw_emit_vertex_attr(vinfo, EMIT_4F, interp, src);
- }
- llvmpipe->psize_slot = draw_find_shader_output(llvmpipe->draw,
- TGSI_SEMANTIC_PSIZE, 0);
- if (llvmpipe->psize_slot > 0) {
- draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_CONSTANT,
- llvmpipe->psize_slot);
+ vs_index = draw_find_shader_output(llvmpipe->draw,
+ lpfs->info.base.input_semantic_name[i],
+ lpfs->info.base.input_semantic_index[i]);
+
+ if (lpfs->info.base.input_semantic_name[i] == TGSI_SEMANTIC_COLOR &&
+ lpfs->info.base.input_semantic_index[i] < 2) {
+ int idx = lpfs->info.base.input_semantic_index[i];
+ llvmpipe->color_slot[idx] = (int)vinfo->num_attribs;
}
- draw_compute_vertex_size(vinfo);
+ /*
+ * Emit the requested fs attribute for all but position.
+ */
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE, vs_index);
}
- return vinfo;
-}
-
-
-/**
- * Called from vbuf module.
- *
- * Note that there's actually two different vertex layouts in llvmpipe.
- *
- * The normal one is computed in llvmpipe_get_vertex_info() above and is
- * used by the point/line/tri "setup" code.
- *
- * The other one (this one) is only used by the vbuf module (which is
- * not normally used by default but used in testing). For the vbuf module,
- * we basically want to pass-through the draw module's vertex layout as-is.
- * When the llvmpipe vbuf code begins drawing, the normal vertex layout
- * will come into play again.
- */
-struct vertex_info *
-llvmpipe_get_vbuf_vertex_info(struct llvmpipe_context *llvmpipe)
-{
- (void) llvmpipe_get_vertex_info(llvmpipe);
- return &llvmpipe->vertex_info_vbuf;
-}
+ /* Figure out if we need bcolor as well.
+ */
+ for (i = 0; i < 2; i++) {
+ vs_index = draw_find_shader_output(llvmpipe->draw,
+ TGSI_SEMANTIC_BCOLOR, i);
+ if (vs_index > 0) {
+ llvmpipe->bcolor_slot[i] = (int)vinfo->num_attribs;
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE, vs_index);
+ }
+ }
-/**
- * Recompute cliprect from scissor bounds, scissor enable and surface size.
- */
-static void
-compute_cliprect(struct llvmpipe_context *lp)
-{
- /* LP_NEW_FRAMEBUFFER
- */
- uint surfWidth = lp->framebuffer.width;
- uint surfHeight = lp->framebuffer.height;
- /* LP_NEW_RASTERIZER
+ /* Figure out if we need pointsize as well.
*/
- if (lp->rasterizer->scissor) {
+ vs_index = draw_find_shader_output(llvmpipe->draw,
+ TGSI_SEMANTIC_PSIZE, 0);
- /* LP_NEW_SCISSOR
- *
- * clip to scissor rect:
- */
- lp->cliprect.minx = MAX2(lp->scissor.minx, 0);
- lp->cliprect.miny = MAX2(lp->scissor.miny, 0);
- lp->cliprect.maxx = MIN2(lp->scissor.maxx, surfWidth);
- lp->cliprect.maxy = MIN2(lp->scissor.maxy, surfHeight);
- }
- else {
- /* clip to surface bounds */
- lp->cliprect.minx = 0;
- lp->cliprect.miny = 0;
- lp->cliprect.maxx = surfWidth;
- lp->cliprect.maxy = surfHeight;
+ if (vs_index > 0) {
+ llvmpipe->psize_slot = vinfo->num_attribs;
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_CONSTANT, vs_index);
}
+
+ draw_compute_vertex_size(vinfo);
+ lp_setup_set_vertex_info(llvmpipe->setup, vinfo);
}
-/* Hopefully this will remain quite simple, otherwise need to pull in
+/**
+ * Handle state changes.
+ * Called just prior to drawing anything (pipe::draw_arrays(), etc).
+ *
+ * Hopefully this will remain quite simple, otherwise need to pull in
* something like the state tracker mechanism.
*/
void llvmpipe_update_derived( struct llvmpipe_context *llvmpipe )
*/
if (llvmpipe->tex_timestamp != lp_screen->timestamp) {
llvmpipe->tex_timestamp = lp_screen->timestamp;
- llvmpipe->dirty |= LP_NEW_TEXTURE;
+ llvmpipe->dirty |= LP_NEW_SAMPLER_VIEW;
}
- if (llvmpipe->dirty & (LP_NEW_SAMPLER |
- LP_NEW_TEXTURE)) {
- /* TODO */
- }
-
if (llvmpipe->dirty & (LP_NEW_RASTERIZER |
LP_NEW_FS |
LP_NEW_VS))
- invalidate_vertex_layout( llvmpipe );
-
- if (llvmpipe->dirty & (LP_NEW_SCISSOR |
- LP_NEW_RASTERIZER |
- LP_NEW_FRAMEBUFFER))
- compute_cliprect(llvmpipe);
+ compute_vertex_info( llvmpipe );
if (llvmpipe->dirty & (LP_NEW_FS |
+ LP_NEW_FRAMEBUFFER |
LP_NEW_BLEND |
+ LP_NEW_SCISSOR |
LP_NEW_DEPTH_STENCIL_ALPHA |
+ LP_NEW_RASTERIZER |
LP_NEW_SAMPLER |
- LP_NEW_TEXTURE))
+ LP_NEW_SAMPLER_VIEW |
+ LP_NEW_OCCLUSION_QUERY))
llvmpipe_update_fs( llvmpipe );
+ if (llvmpipe->dirty & (LP_NEW_FS |
+ LP_NEW_RASTERIZER))
+ llvmpipe_update_setup( llvmpipe );
+
+ if (llvmpipe->dirty & LP_NEW_BLEND_COLOR)
+ lp_setup_set_blend_color(llvmpipe->setup,
+ &llvmpipe->blend_color);
+
+ if (llvmpipe->dirty & LP_NEW_SCISSOR)
+ lp_setup_set_scissor(llvmpipe->setup, &llvmpipe->scissor);
+
+ if (llvmpipe->dirty & LP_NEW_DEPTH_STENCIL_ALPHA) {
+ lp_setup_set_alpha_ref_value(llvmpipe->setup,
+ llvmpipe->depth_stencil->alpha.ref_value);
+ lp_setup_set_stencil_ref_values(llvmpipe->setup,
+ llvmpipe->stencil_ref.ref_value);
+ }
+
+ if (llvmpipe->dirty & LP_NEW_CONSTANTS)
+ lp_setup_set_fs_constants(llvmpipe->setup,
+ Elements(llvmpipe->constants[PIPE_SHADER_FRAGMENT]),
+ llvmpipe->constants[PIPE_SHADER_FRAGMENT]);
+
+ if (llvmpipe->dirty & (LP_NEW_SAMPLER_VIEW))
+ lp_setup_set_fragment_sampler_views(llvmpipe->setup,
+ llvmpipe->num_sampler_views[PIPE_SHADER_FRAGMENT],
+ llvmpipe->sampler_views[PIPE_SHADER_FRAGMENT]);
+
+ if (llvmpipe->dirty & (LP_NEW_SAMPLER))
+ lp_setup_set_fragment_sampler_state(llvmpipe->setup,
+ llvmpipe->num_samplers[PIPE_SHADER_FRAGMENT],
+ llvmpipe->samplers[PIPE_SHADER_FRAGMENT]);
llvmpipe->dirty = 0;
}
+
projects / mesa.git / blobdiff