boolean allow_null_state;
};
+struct r300_aa_state {
+ struct r300_surface *dest;
+
+ uint32_t aa_config;
+ uint32_t aaresolve_ctl;
+};
+
struct r300_blend_state {
uint32_t cb[8];
uint32_t cb_no_readwrite[8];
uint32_t cb[3];
};
+struct r300_clip_state {
+ struct pipe_clip_state clip;
+
+ uint32_t cb[29];
+};
+
struct r300_dsa_state {
+ struct pipe_depth_stencil_alpha_state dsa;
+
+ /* This is actually a command buffer with named dwords. */
+ uint32_t cb_begin;
uint32_t alpha_function; /* R300_FG_ALPHA_FUNC: 0x4bd4 */
- uint32_t alpha_reference; /* R500_FG_ALPHA_VALUE: 0x4be0 */
+ uint32_t cb_reg_seq;
uint32_t z_buffer_control; /* R300_ZB_CNTL: 0x4f00 */
uint32_t z_stencil_control; /* R300_ZB_ZSTENCILCNTL: 0x4f04 */
uint32_t stencil_ref_mask; /* R300_ZB_STENCILREFMASK: 0x4f08 */
+ uint32_t cb_reg;
uint32_t stencil_ref_bf; /* R500_ZB_STENCILREFMASK_BF: 0x4fd4 */
+ /* The second command buffer disables zbuffer reads and writes. */
+ uint32_t cb_no_readwrite[8];
+
/* Whether a two-sided stencil is enabled. */
boolean two_sided;
/* Whether a fallback should be used for a two-sided stencil ref value. */
boolean two_sided_stencil_ref;
};
+struct r300_hyperz_state {
+ int current_func; /* -1 after a clear before first op */
+ int flush;
+ /* This is actually a command buffer with named dwords. */
+ uint32_t cb_flush_begin;
+ uint32_t zb_zcache_ctlstat; /* R300_ZB_CACHE_CNTL */
+ uint32_t cb_begin;
+ uint32_t zb_bw_cntl; /* R300_ZB_BW_CNTL */
+ uint32_t cb_reg1;
+ uint32_t zb_depthclearvalue; /* R300_ZB_DEPTHCLEARVALUE */
+ uint32_t cb_reg2;
+ uint32_t sc_hyperz; /* R300_SC_HYPERZ */
+ uint32_t cb_reg3;
+ uint32_t gb_z_peq_config; /* R300_GB_Z_PEQ_CONFIG: 0x4028 */
+};
+
+struct r300_gpu_flush {
+ uint32_t cb_flush_clean[6];
+};
+
struct r300_rs_state {
/* Original rasterizer state. */
struct pipe_rasterizer_state rs;
/* Draw-specific rasterizer state. */
struct pipe_rasterizer_state rs_draw;
- uint32_t vap_control_status; /* R300_VAP_CNTL_STATUS: 0x2140 */
- uint32_t antialiasing_config; /* R300_GB_AA_CONFIG: 0x4020 */
- uint32_t point_size; /* R300_GA_POINT_SIZE: 0x421c */
- uint32_t point_minmax; /* R300_GA_POINT_MINMAX: 0x4230 */
- uint32_t line_control; /* R300_GA_LINE_CNTL: 0x4234 */
- float depth_scale; /* R300_SU_POLY_OFFSET_FRONT_SCALE: 0x42a4 */
- /* R300_SU_POLY_OFFSET_BACK_SCALE: 0x42ac */
- float depth_offset; /* R300_SU_POLY_OFFSET_FRONT_OFFSET: 0x42a8 */
- /* R300_SU_POLY_OFFSET_BACK_OFFSET: 0x42b0 */
- uint32_t polygon_offset_enable; /* R300_SU_POLY_OFFSET_ENABLE: 0x42b4 */
- uint32_t cull_mode; /* R300_SU_CULL_MODE: 0x42b8 */
- uint32_t line_stipple_config; /* R300_GA_LINE_STIPPLE_CONFIG: 0x4328 */
- uint32_t line_stipple_value; /* R300_GA_LINE_STIPPLE_VALUE: 0x4260 */
+ /* Command buffers. */
+ uint32_t cb_main[25];
+ uint32_t cb_poly_offset_zb16[5];
+ uint32_t cb_poly_offset_zb24[5];
+
+ /* The index to cb_main where the cull_mode register value resides. */
+ unsigned cull_mode_index;
+
+ /* Whether polygon offset is enabled. */
+ boolean polygon_offset_enable;
+
+ /* This is emitted in the draw function. */
uint32_t color_control; /* R300_GA_COLOR_CONTROL: 0x4278 */
- uint32_t polygon_mode; /* R300_GA_POLY_MODE: 0x4288 */
- uint32_t clip_rule; /* R300_SC_CLIP_RULE: 0x43D0 */
-
- /* Specifies top of Raster pipe specific enable controls,
- * i.e. texture coordinates stuffing for points, lines, triangles */
- uint32_t stuffing_enable; /* R300_GB_ENABLE: 0x4008 */
-
- /* Point sprites texture coordinates, 0: lower left, 1: upper right */
- float point_texcoord_left; /* R300_GA_POINT_S0: 0x4200 */
- float point_texcoord_bottom; /* R300_GA_POINT_T0: 0x4204 */
- float point_texcoord_right; /* R300_GA_POINT_S1: 0x4208 */
- float point_texcoord_top; /* R300_GA_POINT_T1: 0x420c */
};
struct r300_rs_block {
/* Copy of r300_texture::texture_format_state with format-specific bits
* added. */
struct r300_texture_format_state format;
+
+ /* The texture cache region for this texture. */
+ uint32_t texcache_region;
};
struct r300_texture_fb_state {
- /* Colorbuffer. */
- uint32_t colorpitch[R300_MAX_TEXTURE_LEVELS]; /* R300_RB3D_COLORPITCH[0-3]*/
- uint32_t us_out_fmt; /* R300_US_OUT_FMT[0-3] */
-
- /* Zbuffer. */
- uint32_t depthpitch[R300_MAX_TEXTURE_LEVELS]; /* R300_RB3D_DEPTHPITCH */
- uint32_t zb_format; /* R300_ZB_FORMAT */
+ uint32_t pitch[R300_MAX_TEXTURE_LEVELS]; /* COLORPITCH or DEPTHPITCH. */
+ uint32_t format; /* US_OUT_FMT or R300_ZB_FORMAT */
};
struct r300_texture_sampler_state {
unsigned count;
};
+struct r300_invariant_state {
+ uint32_t cb[20];
+};
+
+struct r300_vap_invariant_state {
+ uint32_t cb[9];
+};
+
struct r300_viewport_state {
float xscale; /* R300_VAP_VPORT_XSCALE: 0x2098 */
float xoffset; /* R300_VAP_VPORT_XOFFSET: 0x209c */
struct r300_constant_buffer {
/* Buffer of constants */
- float constants[256][4];
- /* Total number of constants */
- unsigned count;
+ uint32_t *ptr;
+ /* Remapping table. */
+ unsigned *remap_table;
};
/* Query object.
struct r300_query {
/* The kind of query. Currently only OQ is supported. */
unsigned type;
- /* The current count of this query. Required to be at least 32 bits. */
- unsigned int count;
- /* The offset of this query into the query buffer, in bytes. */
- unsigned offset;
+ /* The number of pipes where query results are stored. */
+ unsigned num_pipes;
+ /* How many results have been written, in dwords. It's incremented
+ * after end_query and flush. */
+ unsigned num_results;
/* if we've flushed the query */
boolean flushed;
/* if begin has been emitted */
boolean begin_emitted;
+
+ /* The buffer where query results are stored. */
+ struct r300_winsys_buffer *buffer;
+ /* The size of the buffer. */
+ unsigned buffer_size;
+ /* The domain of the buffer. */
+ enum r300_buffer_domain domain;
+
/* Linked list members. */
struct r300_query* prev;
struct r300_query* next;
boolean signalled;
};
-struct r300_texture {
- /* Parent class */
- struct u_resource b;
+struct r300_surface {
+ struct pipe_surface base;
+
+ /* Winsys buffer backing the texture. */
+ struct r300_winsys_buffer *buffer;
enum r300_buffer_domain domain;
+ uint32_t offset; /* COLOROFFSET or DEPTHOFFSET. */
+ uint32_t pitch; /* COLORPITCH or DEPTHPITCH. */
+ uint32_t format; /* US_OUT_FMT or ZB_FORMAT. */
+
+ /* Parameters dedicated to the CBZB clear. */
+ uint32_t cbzb_width; /* Aligned width. */
+ uint32_t cbzb_height; /* Half of the height. */
+ uint32_t cbzb_midpoint_offset; /* DEPTHOFFSET. */
+ uint32_t cbzb_pitch; /* DEPTHPITCH. */
+ uint32_t cbzb_format; /* ZB_FORMAT. */
+
+ /* Whether the CBZB clear is allowed on the surface. */
+ boolean cbzb_allowed;
+
+};
+
+struct r300_texture_desc {
+ /* Parent class. */
+ struct u_resource b;
+
+ /* Buffer tiling.
+ * Macrotiling is specified per-level because small mipmaps cannot
+ * be macrotiled. */
+ enum r300_buffer_tiling microtile;
+ enum r300_buffer_tiling macrotile[R300_MAX_TEXTURE_LEVELS];
+
/* Offsets into the buffer. */
- unsigned offset[R300_MAX_TEXTURE_LEVELS];
+ unsigned offset_in_bytes[R300_MAX_TEXTURE_LEVELS];
- /* A pitch for each mip-level */
- unsigned pitch[R300_MAX_TEXTURE_LEVELS];
+ /* Strides for each mip-level. */
+ unsigned stride_in_pixels[R300_MAX_TEXTURE_LEVELS];
+ unsigned stride_in_bytes[R300_MAX_TEXTURE_LEVELS];
- /* A pitch multiplied by blockwidth as hardware wants
- * the number of pixels instead of the number of blocks. */
- unsigned hwpitch[R300_MAX_TEXTURE_LEVELS];
+ /* Size of one zslice or face or 2D image based on the texture target. */
+ unsigned layer_size_in_bytes[R300_MAX_TEXTURE_LEVELS];
- /* Size of one zslice or face based on the texture target */
- unsigned layer_size[R300_MAX_TEXTURE_LEVELS];
+ /* Total size of this texture, in bytes,
+ * derived from the texture properties. */
+ unsigned size_in_bytes;
- /* Whether the mipmap level is macrotiled. */
- enum r300_buffer_tiling mip_macrotile[R300_MAX_TEXTURE_LEVELS];
+ /* Total size of the buffer backing this texture, in bytes.
+ * It must be >= size. */
+ unsigned buffer_size_in_bytes;
/**
* If non-zero, override the natural texture layout with
*
* \sa r300_texture_get_stride
*/
- unsigned stride_override;
+ unsigned stride_in_bytes_override;
- /* Total size of this texture, in bytes. */
- unsigned size;
+ /* Whether this texture has non-power-of-two dimensions.
+ * It can be either a regular texture or a rectangle one. */
+ boolean is_npot;
- /* Whether this texture has non-power-of-two dimensions
- * or a user-specified pitch.
- * It can be either a regular texture or a rectangle one.
- */
- boolean uses_pitch;
+ /* This flag says that hardware must use the stride for addressing
+ * instead of the width. */
+ boolean uses_stride_addressing;
+
+ /* Whether CBZB fast color clear is allowed on the miplevel. */
+ boolean cbzb_allowed[R300_MAX_TEXTURE_LEVELS];
+};
+
+struct r300_texture {
+ struct r300_texture_desc desc;
+
+ enum r300_buffer_domain domain;
/* Pipe buffer backing this texture. */
struct r300_winsys_buffer *buffer;
/* All bits should be filled in. */
struct r300_texture_fb_state fb_state;
- /* Buffer tiling */
- enum r300_buffer_tiling microtile, macrotile;
+ /* hyper-z memory allocs */
+ struct mem_block *hiz_mem[R300_MAX_TEXTURE_LEVELS];
+ struct mem_block *zmask_mem[R300_MAX_TEXTURE_LEVELS];
+ boolean zmask_in_use[R300_MAX_TEXTURE_LEVELS];
+ boolean hiz_in_use[R300_MAX_TEXTURE_LEVELS];
+
+ /* This is the level tiling flags were last time set for.
+ * It's used to prevent redundant tiling-flags changes from happening.*/
+ unsigned surface_level;
};
struct r300_vertex_element_state {
enum pipe_format hw_format[PIPE_MAX_ATTRIBS];
unsigned hw_format_size[PIPE_MAX_ATTRIBS];
+ /* The size of the vertex, in dwords. */
+ unsigned vertex_size_dwords;
+
/* This might mean two things:
* - src_format != hw_format, as discussed above.
* - src_offset % 4 != 0. */
/* The interface to the windowing system, etc. */
struct r300_winsys_screen *rws;
+ /* The command stream. */
+ struct r300_winsys_cs *cs;
/* Screen. */
struct r300_screen *screen;
+
/* Draw module. Used mostly for SW TCL. */
struct draw_context* draw;
+ /* Vertex buffer for SW TCL. */
+ struct pipe_resource* vbo;
+ /* Offset and size into the SW TCL VBO. */
+ size_t draw_vbo_offset;
+ size_t draw_vbo_size;
+ /* Whether the VBO must not be flushed. */
+ boolean draw_vbo_locked;
+
/* Accelerated blit support. */
struct blitter_context* blitter;
/* Stencil two-sided reference value fallback. */
/* For translating vertex buffers having incompatible vertex layout. */
struct r300_translate_context tran;
- /* Vertex buffer for rendering. */
- struct pipe_resource* vbo;
- /* Offset into the VBO. */
- size_t vbo_offset;
+ /* The KIL opcode needs the first texture unit to be enabled
+ * on r3xx-r4xx. In order to calm down the CS checker, we bind this
+ * dummy texture there. */
+ struct r300_sampler_view *texkill_sampler;
- /* Occlusion query buffer. */
- struct pipe_resource* oqbo;
- /* Query list. */
+ /* The currently active query. */
struct r300_query *query_current;
+ /* The saved query for blitter operations. */
+ struct r300_query *blitter_saved_query;
+ /* Query list. */
struct r300_query query_list;
/* Various CSO state objects. */
/* Beginning of atom list. */
struct r300_atom atom_list;
+ /* Anti-aliasing (MSAA) state. */
+ struct r300_atom aa_state;
/* Blend state. */
struct r300_atom blend_state;
/* Blend color state. */
struct r300_atom fs_constants;
/* Framebuffer state. */
struct r300_atom fb_state;
+ /* Framebuffer state (pipelined regs). */
+ struct r300_atom fb_state_pipelined;
+ /* HyperZ state (various SC/ZB bits). */
+ struct r300_atom hyperz_state;
/* Occlusion query. */
struct r300_atom query_start;
/* Rasterizer state. */
struct r300_atom ztop_state;
/* PVS flush. */
struct r300_atom pvs_flush;
+ /* VAP invariant state. */
+ struct r300_atom vap_invariant_state;
/* Texture cache invalidate. */
struct r300_atom texture_cache_inval;
+ /* GPU flush. */
+ struct r300_atom gpu_flush;
+ /* HiZ clear */
+ struct r300_atom hiz_clear;
+ /* zmask clear */
+ struct r300_atom zmask_clear;
/* Invariant state. This must be emitted to get the engine started. */
struct r300_atom invariant_state;
struct r300_vertex_element_state *velems;
bool any_user_vbs;
+ struct pipe_index_buffer index_buffer;
+
/* Vertex info for Draw. */
struct vertex_info vertex_info;
struct pipe_stencil_ref stencil_ref;
-
- struct pipe_clip_state clip;
-
struct pipe_viewport_state viewport;
/* Stream locations for SWTCL. */
boolean two_sided_color;
/* Incompatible vertex buffer layout? (misaligned stride or buffer_offset) */
boolean incompatible_vb_layout;
+#define R300_Z_COMPRESS_44 1
+#define RV350_Z_COMPRESS_88 2
+ int z_compression;
+ boolean cbzb_clear;
+ boolean z_decomp_rd;
+
+ /* two mem block managers for hiz/zmask ram space */
+ struct mem_block *hiz_mm;
+ struct mem_block *zmask_mm;
/* upload managers */
struct u_upload_mgr *upload_vb;
struct u_upload_mgr *upload_ib;
+ struct util_mempool pool_transfers;
+
/* Stat counter. */
uint64_t flush_counter;
};
return (struct r300_query*)q;
}
+static INLINE struct r300_surface* r300_surface(struct pipe_surface* surf)
+{
+ return (struct r300_surface*)surf;
+}
+
static INLINE struct r300_texture* r300_texture(struct pipe_resource* tex)
{
return (struct r300_texture*)tex;
struct pipe_context* r300_create_context(struct pipe_screen* screen,
void *priv);
-boolean r300_check_cs(struct r300_context *r300, unsigned size);
void r300_finish(struct r300_context *r300);
+void r300_flush_cb(void *data);
/* Context initialization. */
struct draw_stage* r300_draw_stage(struct r300_context* r300);
void r300_init_state_functions(struct r300_context* r300);
void r300_init_resource_functions(struct r300_context* r300);
+/* r300_blit.c */
+void r300_flush_depth_stencil(struct pipe_context *pipe,
+ struct pipe_resource *dst,
+ struct pipe_subresource subdst,
+ unsigned zslice);
+
+/* r300_query.c */
+void r300_resume_query(struct r300_context *r300,
+ struct r300_query *query);
+void r300_stop_query(struct r300_context *r300);
+
/* r300_render_translate.c */
void r300_begin_vertex_translate(struct r300_context *r300);
void r300_end_vertex_translate(struct r300_context *r300);
/* r300_render_stencilref.c */
void r300_plug_in_stencil_ref_fallback(struct r300_context *r300);
+/* r300_render.c */
+void r300_draw_flush_vbuf(struct r300_context *r300);
+boolean r500_index_bias_supported(struct r300_context *r300);
+void r500_emit_index_bias(struct r300_context *r300, int index_bias);
+
/* r300_state.c */
+enum r300_fb_state_change {
+ R300_CHANGED_FB_STATE = 0,
+ R300_CHANGED_CBZB_FLAG,
+ R300_CHANGED_ZCLEAR_FLAG
+};
+
+void r300_mark_fb_state_dirty(struct r300_context *r300,
+ enum r300_fb_state_change change);
void r300_mark_fs_code_dirty(struct r300_context *r300);
/* r300_debug.c */