#define R300_VAP_GB_HORZ_CLIP_ADJ 0x2228
#define R300_VAP_GB_HORZ_DISC_ADJ 0x222c
+#define R300_VAP_PVS_FLOW_CNTL_ADDRS_0 0x2230
+#define R300_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 8)
+#define R300_PVS_FC_LAST_INST(x) ((x) << 16)
+#define R300_PVS_FC_RTN_INST(x) ((x) << 24)
+
/* gap */
/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
# define R300_2288_R300 0x00750000 /* -- nh */
# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */
+#define R300_VAP_PVS_FLOW_CNTL_LOOP_INDEX_0 0x2290
+#define R300_PVS_FC_LOOP_INIT_VAL(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_STEP_VAL(x) ((x) << 8)
+
/* gap */
/* Addresses are relative to the vertex program instruction area of the
#define R300_VAP_PVS_CODE_CNTL_1 0x22D8
# define R300_PVS_LAST_VTX_SRC_INST_SHIFT 0
#define R300_VAP_PVS_FLOW_CNTL_OPC 0x22DC
+#define R300_VAP_PVS_FC_OPC_JUMP(x) (1 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_LOOP(x) (2 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_JSR(x) (3 << (2 * (x)))
/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
* immediate vertices
/* write 0 to indicate end of packet? */
#define R300_VAP_VTX_END_OF_PKT 0x24AC
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_LW_0 0x2500
+#define R500_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R500_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 16)
+
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_UW_0 0x2504
+#define R500_PVS_FC_LAST_INST(x) ((x) << 0)
+#define R500_PVS_FC_RTN_INST(x) ((x) << 16)
+
/* gap */
/* These are values from r300_reg/r300_reg.h - they are known to be correct
# define R300_TX_FORMAT_3D (1 << 25)
# define R300_TX_FORMAT_CUBIC_MAP (2 << 25)
+# define R300_TX_FORMAT_TEX_COORD_TYPE_MASK (0x3 << 25)
/* alpha modes, convenience mostly */
/* if you have alpha, pick constant appropriate to the