nouveau/nvfx: Remove enforcement of bit depth being same as front buffer

[mesa.git] / src / gallium / drivers / r300 / r300_reg.h

diff --git a/src/gallium/drivers/r300/r300_reg.h b/src/gallium/drivers/r300/r300_reg.h
index f54a467e7c8120fd6e6291ee399a6b3d912205d1..6bea783f69703f55f9e73dc8721a8e850a363388 100644 (file)
--- a/src/gallium/drivers/r300/r300_reg.h
+++ b/src/gallium/drivers/r300/r300_reg.h
@@ -496,6 +496,12 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_VAP_GB_HORZ_CLIP_ADJ                   0x2228
 #define R300_VAP_GB_HORZ_DISC_ADJ                   0x222c
 
+#define R300_VAP_PVS_FLOW_CNTL_ADDRS_0      0x2230
+#define R300_PVS_FC_ACT_ADRS(x)             ((x) << 0)
+#define R300_PVS_FC_LOOP_CNT_JMP_INST(x)    ((x) << 8)
+#define R300_PVS_FC_LAST_INST(x)            ((x) << 16)
+#define R300_PVS_FC_RTN_INST(x)             ((x) << 24)
+
 /* gap */
 
 /* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
@@ -514,6 +520,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #       define R300_2288_R300                    0x00750000 /* -- nh */
 #       define R300_2288_RV350                   0x0000FFFF /* -- Vladimir */
 
+#define R300_VAP_PVS_FLOW_CNTL_LOOP_INDEX_0 0x2290
+#define R300_PVS_FC_LOOP_INIT_VAL(x)        ((x) << 0)
+#define R300_PVS_FC_LOOP_STEP_VAL(x)        ((x) << 8)
+
 /* gap */
 
 /* Addresses are relative to the vertex program instruction area of the
@@ -548,6 +558,9 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_VAP_PVS_CODE_CNTL_1           0x22D8
 #       define R300_PVS_LAST_VTX_SRC_INST_SHIFT  0
 #define R300_VAP_PVS_FLOW_CNTL_OPC          0x22DC
+#define R300_VAP_PVS_FC_OPC_JUMP(x)         (1 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_LOOP(x)         (2 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_JSR(x)          (3 << (2 * (x)))
 
 /* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
  * immediate vertices
@@ -564,6 +577,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* write 0 to indicate end of packet? */
 #define R300_VAP_VTX_END_OF_PKT             0x24AC
 
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_LW_0   0x2500
+#define R500_PVS_FC_ACT_ADRS(x)             ((x) << 0)
+#define R500_PVS_FC_LOOP_CNT_JMP_INST(x)    ((x) << 16)
+
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_UW_0   0x2504
+#define R500_PVS_FC_LAST_INST(x)            ((x) << 0)
+#define R500_PVS_FC_RTN_INST(x)             ((x) << 16)
+
 /* gap */
 
 /* These are values from r300_reg/r300_reg.h - they are known to be correct
@@ -1586,6 +1607,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 
 #      define R300_TX_FORMAT_3D                   (1 << 25)
 #      define R300_TX_FORMAT_CUBIC_MAP            (2 << 25)
+#      define R300_TX_FORMAT_TEX_COORD_TYPE_MASK  (0x3 << 25)
 
        /* alpha modes, convenience mostly */
        /* if you have alpha, pick constant appropriate to the
@@ -2617,7 +2639,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #      define R300_WR_COMP_DISABLE                          (0 << 4)
 #      define R300_WR_COMP_ENABLE                           (1 << 4)
 #      define R300_ZB_CB_CLEAR_RMW                          (0 << 5)
-#      define R300_ZB_CB_CLEAR_CACHE_LINEAR                 (1 << 5)
+#      define R300_ZB_CB_CLEAR_CACHE_LINE_WRITE_ONLY        (1 << 5)
 #      define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE   (0 << 6)
 #      define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE    (1 << 6)
 
@@ -3436,6 +3458,7 @@ enum {
 #   define R300_VBPNTR_SIZE1(x)    (((x) >> 2) << 16)
 #   define R300_VBPNTR_STRIDE1(x)  (((x) >> 2) << 24)
 
+#define R300_PACKET3_3D_CLEAR_ZMASK         0x00003200
 #define R300_PACKET3_INDX_BUFFER            0x00003300
 #    define R300_INDX_BUFFER_DST_SHIFT          0
 #    define R300_INDX_BUFFER_SKIP_SHIFT         16