# define R300_VAP_TCL_BYPASS (1 << 8)
/* Read only flag if TCL engine is busy. */
# define R300_VAP_PVS_BUSY (1 << 11)
-/* TODO: gap for MAX_MPS */
/* Read only flag if the vertex store is busy. */
# define R300_VAP_VS_BUSY (1 << 24)
/* Read only flag if the reciprocal engine is busy. */
*
* The line width is given in multiples of 6.
* In default mode lines are classified as vertical lines.
- * HO: horizontal
- * VE: vertical or horizontal
- * HO & VE: no classification
*/
#define R300_GA_LINE_CNTL 0x4234
# define R300_GA_LINE_CNTL_WIDTH_SHIFT 0
# define R300_GA_LINE_CNTL_END_TYPE_COMP (3 << 16) /* Computed (perpendicular to slope) */
# define R500_GA_LINE_CNTL_SORT_NO (0 << 18)
# define R500_GA_LINE_CNTL_SORT_MINX_MINY (1 << 18)
-/** TODO: looks wrong */
-# define R300_LINESIZE_MAX (R300_GA_LINE_CNTL_WIDTH_MASK / 6)
-/** TODO: looks wrong */
-# define R300_LINE_CNT_HO (1 << 16)
-/** TODO: looks wrong */
-# define R300_LINE_CNT_VE (1 << 17)
/* Line Stipple configuration information. */
#define R300_GA_LINE_STIPPLE_CONFIG 0x4238
#define R300_GA_SOFT_RESET 0x429c
/* Not sure why there are duplicate of factor and constant values.
- * My best guess so far is that there are seperate zbiases for test and write.
+ * My best guess so far is that there are separate zbiases for test and write.
* Ordering might be wrong.
* Some of the tests indicate that fgl has a fallback implementation of zbias
* via pixel shaders.
#define R300_RS_IP_1 0x4314
#define R300_RS_IP_2 0x4318
#define R300_RS_IP_3 0x431C
-# define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */
-# define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */
# define R300_RS_TEX_PTR(x) (x << 0)
# define R300_RS_COL_PTR(x) ((x) << 6)
# define R300_RS_COL_FMT(x) ((x) << 9)
#define R300_TX_OFFSET_6 0x4558
#define R300_TX_OFFSET_7 0x455C
-# define R300_TXO_ENDIAN_NO_SWAP (0 << 0)
-# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0)
-# define R300_TXO_ENDIAN_WORD_SWAP (2 << 0)
-# define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0)
+# define R300_TXO_ENDIAN(x) ((x) << 0)
# define R300_TXO_MACRO_TILE_LINEAR (0 << 2)
# define R300_TXO_MACRO_TILE_TILED (1 << 2)
# define R300_TXO_MACRO_TILE(x) ((x) << 2)
* Program this register with a 32-bit value in ARGB8888 or ARGB2101010
* formats, ignoring the fields.
*/
-#define RB3D_COLOR_CLEAR_VALUE 0x4e14
+#define R300_RB3D_COLOR_CLEAR_VALUE 0x4E14
+/* For FP16 AA. */
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46C0
+#define R500_RB3D_COLOR_CLEAR_VALUE_GB 0x46C4
/* gap */
# define R300_COLOR_MICROTILE_ENABLE (1 << 17)
# define R300_COLOR_MICROTILE_ENABLE_SQUARE (2 << 17) /* Only available in 16-bit */
# define R300_COLOR_MICROTILE(x) ((x) << 17)
-# define R300_COLOR_ENDIAN_NO_SWAP (0 << 19)
-# define R300_COLOR_ENDIAN_WORD_SWAP (1 << 19)
-# define R300_COLOR_ENDIAN_DWORD_SWAP (2 << 19)
-# define R300_COLOR_ENDIAN_HALF_DWORD_SWAP (3 << 19)
+# define R300_COLOR_ENDIAN(x) ((x) << 19)
# define R500_COLOR_FORMAT_ARGB10101010 (0 << 21)
# define R500_COLOR_FORMAT_UV1010 (1 << 21)
# define R500_COLOR_FORMAT_CI8 (2 << 21) /* 2D only */
# define R300_RB3D_DITHER_CTL_ALPHA_DITHER_MODE_LUT (2 << 2)
/* reserved */
+#define R300_RB3D_CMASK_OFFSET0 0x4E54
+#define R300_RB3D_CMASK_OFFSET1 0x4E58
+#define R300_RB3D_CMASK_OFFSET2 0x4E5C
+#define R300_RB3D_CMASK_OFFSET3 0x4E60
+#define R300_RB3D_CMASK_PITCH0 0x4E64
+#define R300_RB3D_CMASK_PITCH1 0x4E68
+#define R300_RB3D_CMASK_PITCH2 0x4E6C
+#define R300_RB3D_CMASK_PITCH3 0x4E70
+#define R300_RB3D_CMASK_WRINDEX 0x4E74
+#define R300_RB3D_CMASK_DWORD 0x4E78
+#define R300_RB3D_CMASK_RDINDEX 0x4E7C
+
/* Resolve buffer destination address. The cache must be empty before changing
* this register if the cb is in resolve mode. Unpipelined
*/
# define R300_DEPTHMICROTILE_TILED (1 << 17)
# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
# define R300_DEPTHMICROTILE(x) ((x) << 17)
-# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
-# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
-# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
-# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+# define R300_DEPTHENDIAN(x) ((x) << 19)
+
+#define R300_SURF_NO_SWAP 0
+#define R300_SURF_WORD_SWAP 1
+#define R300_SURF_DWORD_SWAP 2
+#define R300_SURF_HALF_DWORD_SWAP 3
/* Z Buffer Clear Value */
#define R300_ZB_DEPTHCLEARVALUE 0x4f28
/*\}*/
-#define PVS_OP_DST_OPERAND(opcode, math_inst, macro_inst, reg_index, reg_writemask, reg_class) \
+#define PVS_OP_DST_OPERAND(opcode, math_inst, macro_inst, reg_index, reg_writemask, reg_class, saturate) \
(((opcode & PVS_DST_OPCODE_MASK) << PVS_DST_OPCODE_SHIFT) \
| ((math_inst & PVS_DST_MATH_INST_MASK) << PVS_DST_MATH_INST_SHIFT) \
| ((macro_inst & PVS_DST_MACRO_INST_MASK) << PVS_DST_MACRO_INST_SHIFT) \
| ((reg_index & PVS_DST_OFFSET_MASK) << PVS_DST_OFFSET_SHIFT) \
| ((reg_writemask & 0xf) << PVS_DST_WE_X_SHIFT) /* X Y Z W */ \
- | ((reg_class & PVS_DST_REG_TYPE_MASK) << PVS_DST_REG_TYPE_SHIFT))
+ | ((reg_class & PVS_DST_REG_TYPE_MASK) << PVS_DST_REG_TYPE_SHIFT)) \
+ | ((math_inst) ? (((saturate) & PVS_DST_ME_SAT_MASK) << PVS_DST_ME_SAT_SHIFT) : \
+ (((saturate) & PVS_DST_VE_SAT_MASK) << PVS_DST_VE_SAT_SHIFT))
#define PVS_SRC_OPERAND(in_reg_index, comp_x, comp_y, comp_z, comp_w, reg_class, negate) \
(((in_reg_index & PVS_SRC_OFFSET_MASK) << PVS_SRC_OFFSET_SHIFT) \
# define R500_INST_TYPE_OUT (1 << 0)
# define R500_INST_TYPE_FC (2 << 0)
# define R500_INST_TYPE_TEX (3 << 0)
-# define R500_INST_TEX_SEM_WAIT (1 << 2)
+# define R500_INST_TEX_SEM_WAIT_SHIFT 2
+# define R500_INST_TEX_SEM_WAIT (1 << R500_INST_TEX_SEM_WAIT_SHIFT)
# define R500_INST_RGB_PRED_SEL_NONE (0 << 3)
# define R500_INST_RGB_PRED_SEL_RGBA (1 << 3)
# define R500_INST_RGB_PRED_SEL_RRRR (2 << 3)
# define R500_INST_ALPHA_PRED_SEL_GGGG (3 << 25)
# define R500_INST_ALPHA_PRED_SEL_BBBB (4 << 25)
# define R500_INST_ALPHA_PRED_SEL_AAAA (5 << 25)
-/* XXX next four are kind of guessed */
+/* Next four are guessed, documentation doesn't mention order. */
# define R500_INST_STAT_WE_R (1 << 28)
# define R500_INST_STAT_WE_G (1 << 29)
# define R500_INST_STAT_WE_B (1 << 30)
# define R500_TEX_INST_LODBIAS (4 << 22)
# define R500_TEX_INST_LOD (5 << 22)
# define R500_TEX_INST_DXDY (6 << 22)
-# define R500_TEX_SEM_ACQUIRE (1 << 25)
+# define R500_TEX_SEM_ACQUIRE_SHIFT 25
+# define R500_TEX_SEM_ACQUIRE (1 << R500_TEX_SEM_ACQUIRE_SHIFT)
# define R500_TEX_IGNORE_UNCOVERED (1 << 26)
# define R500_TEX_UNSCALED (1 << 27)
#define R300_US_W_FMT 0x46b4
* 2. CLEAR_VALUE: Value to write into HIZ RAM.
*/
#define R300_PACKET3_3D_CLEAR_HIZ 0x00003700
+#define R300_PACKET3_3D_CLEAR_CMASK 0x00003800
/* Draws a set of primitives using vertex buffers pointed by the state data.
* At least 2 Parameters:
/*
* CP type-3 packets
*/
-#define R300_CP_CMD_BITBLT_MULTI 0xC0009B00
-
-/* XXX Corbin's stuff from radeon and r200 */
-
#define RADEON_WAIT_UNTIL 0x1720
# define RADEON_WAIT_CRTC_PFLIP (1 << 0)
# define RADEON_WAIT_2D_IDLECLEAN (1 << 16)
# define RADEON_WAIT_3D_IDLECLEAN (1 << 17)
# define RADEON_WAIT_HOST_IDLECLEAN (1 << 18)
-#define R200_3D_DRAW_IMMD_2 0xC0003500
-
-#define RADEON_CP_PACKET0 0x0 /* XXX stolen from radeon_reg.h */
+#define RADEON_CP_PACKET0 0x00000000
#define RADEON_CP_PACKET3 0xC0000000
#define RADEON_ONE_REG_WR (1 << 15)
projects / mesa.git / blobdiff