# define R300_PVS_CONST_START 512
# define R500_PVS_CONST_START 1024
# define R300_MAX_PVS_CONST_VECS 256
-# define R500_MAX_PVS_CONST_VECS 1024
+# define R500_MAX_PVS_CONST_VECS 256
# define R300_PVS_UCP_START 1024
# define R500_PVS_UCP_START 1536
# define R300_POINT_VPORT_SCALE_OFFSET 1030
*
* See bug #9871. http://bugs.freedesktop.org/attachment.cgi?id=10672&action=view
*/
+#define R500_VAP_TEX_TO_COLOR_CNTL 0x2218
+
#define R300_VAP_CLIP_CNTL 0x221C
# define R300_VAP_UCP_ENABLE_0 (1 << 0)
# define R300_VAP_UCP_ENABLE_1 (1 << 1)
#define R300_VAP_GB_HORZ_CLIP_ADJ 0x2228
#define R300_VAP_GB_HORZ_DISC_ADJ 0x222c
+#define R300_VAP_PVS_FLOW_CNTL_ADDRS_0 0x2230
+#define R300_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 8)
+#define R300_PVS_FC_LAST_INST(x) ((x) << 16)
+#define R300_PVS_FC_RTN_INST(x) ((x) << 24)
+
/* gap */
/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
# define R300_2288_R300 0x00750000 /* -- nh */
# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */
+#define R300_VAP_PVS_FLOW_CNTL_LOOP_INDEX_0 0x2290
+#define R300_PVS_FC_LOOP_INIT_VAL(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_STEP_VAL(x) ((x) << 8)
+
/* gap */
/* Addresses are relative to the vertex program instruction area of the
# define R300_PVS_FIRST_INST(x) ((x) << 0)
# define R300_PVS_XYZW_VALID_INST(x) ((x) << 10)
# define R300_PVS_LAST_INST(x) ((x) << 20)
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CONST_CNTL 0x22D4
# define R300_PVS_CONST_BASE_OFFSET_SHIFT 0
+# define R300_PVS_CONST_BASE_OFFSET(x) (x)
# define R300_PVS_MAX_CONST_ADDR_SHIFT 16
# define R300_PVS_MAX_CONST_ADDR(x) ((x) << 16)
#define R300_VAP_PVS_CODE_CNTL_1 0x22D8
# define R300_PVS_LAST_VTX_SRC_INST_SHIFT 0
#define R300_VAP_PVS_FLOW_CNTL_OPC 0x22DC
+#define R300_VAP_PVS_FC_OPC_JUMP(x) (1 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_LOOP(x) (2 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_JSR(x) (3 << (2 * (x)))
/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
* immediate vertices
/* write 0 to indicate end of packet? */
#define R300_VAP_VTX_END_OF_PKT 0x24AC
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_LW_0 0x2500
+#define R500_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R500_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 16)
+
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_UW_0 0x2504
+#define R500_PVS_FC_LAST_INST(x) ((x) << 0)
+#define R500_PVS_FC_RTN_INST(x) ((x) << 16)
+
/* gap */
/* These are values from r300_reg/r300_reg.h - they are known to be correct
# define R500_TX_DIRECTION_HORIZONTAL (0<<27)
# define R500_TX_DIRECTION_VERITCAL (1<<27)
+#define R500_SU_TEX_WRAP_PS3 0x4114
+
/* S Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */
#define R300_GA_POINT_S0 0x4200
# define R300_TX_TRI_PERF_3_8 (3<<15)
# define R300_ANISO_THRESHOLD_MASK (7<<17)
+# define R400_DXTC_SWIZZLE_ENABLE (1<<21)
# define R500_MACRO_SWITCH (1<<22)
+# define R500_TX_MAX_ANISO(x) ((x) << 23)
+# define R500_TX_MAX_ANISO_MASK (63 << 23)
+# define R500_TX_ANISO_HIGH_QUALITY (1 << 30)
# define R500_BORDER_FIX (1<<31)
#define R300_TX_FORMAT0_0 0x4480
# define R300_TX_FORMAT_DXT1 0xF
# define R300_TX_FORMAT_DXT3 0x10
# define R300_TX_FORMAT_DXT5 0x11
-# define R300_TX_FORMAT_Y8 0x12
+# define R300_TX_FORMAT_CxV8U8 0x12
# define R300_TX_FORMAT_AVYU444 0x13
# define R300_TX_FORMAT_VYUY422 0x14
# define R300_TX_FORMAT_YVYU422 0x15
# define R300_TX_FORMAT_32F_32F 0x1C
# define R300_TX_FORMAT_32F_32F_32F_32F 0x1D
# define R300_TX_FORMAT_W24_FP 0x1E
+# define R400_TX_FORMAT_ATI2N 0x1F
+
+/* These need TX_FORMAT2_[0-15].TXFORMAT_MSB set.
+
+ My guess is the 10-bit formats are the 8-bit ones but with filtering being
+ performed with the precision of 10 bits per channel. This makes sense
+ with sRGB textures since the conversion to linear space reduces the precision
+ significantly so the shader gets approximately the 8-bit precision
+ in the end. It might also improve the quality of HDR rendering where
+ high-precision filtering is desirable.
+
+ Again, this is guessed, the formats might mean something entirely else.
+ The others should be fine. */
+# define R500_TX_FORMAT_X1 0x0
+# define R500_TX_FORMAT_X1_REV 0x1
+# define R500_TX_FORMAT_X10 0x2
+# define R500_TX_FORMAT_Y10X10 0x3
+# define R500_TX_FORMAT_W10Z10Y10X10 0x4
+# define R500_TX_FORMAT_ATI1N 0x5
+# define R500_TX_FORMAT_Y8X24 0x6
+
# define R300_TX_FORMAT_SIGNED_W (1 << 5)
# define R300_TX_FORMAT_SIGNED_Z (1 << 6)
# define R300_TX_FORMAT_3D (1 << 25)
# define R300_TX_FORMAT_CUBIC_MAP (2 << 25)
+# define R300_TX_FORMAT_TEX_COORD_TYPE_MASK (0x3 << 25)
/* alpha modes, convenience mostly */
/* if you have alpha, pick constant appropriate to the
# define R300_TX_FORMAT_GAMMA (1 << 21)
# define R300_TX_FORMAT_YUV_TO_RGB (1 << 22)
+# define R300_TX_CACHE(x) ((x) << 27)
+# define R300_TX_CACHE_WHOLE 0
+/* reserved */
+# define R300_TX_CACHE_HALF_0 2
+# define R300_TX_CACHE_HALF_1 3
+# define R300_TX_CACHE_FOURTH_0 4
+# define R300_TX_CACHE_FOURTH_1 5
+# define R300_TX_CACHE_FOURTH_2 6
+# define R300_TX_CACHE_FOURTH_3 7
+# define R300_TX_CACHE_EIGHTH_0 8
+# define R300_TX_CACHE_EIGHTH_1 9
+# define R300_TX_CACHE_EIGHTH_2 10
+# define R300_TX_CACHE_EIGHTH_3 11
+# define R300_TX_CACHE_EIGHTH_4 12
+# define R300_TX_CACHE_EIGHTH_5 13
+# define R300_TX_CACHE_EIGHTH_6 14
+# define R300_TX_CACHE_EIGHTH_7 15
+# define R300_TX_CACHE_SIXTEENTH_0 16
+# define R300_TX_CACHE_SIXTEENTH_1 17
+# define R300_TX_CACHE_SIXTEENTH_2 18
+# define R300_TX_CACHE_SIXTEENTH_3 19
+# define R300_TX_CACHE_SIXTEENTH_4 20
+# define R300_TX_CACHE_SIXTEENTH_5 21
+# define R300_TX_CACHE_SIXTEENTH_6 22
+# define R300_TX_CACHE_SIXTEENTH_7 23
+# define R300_TX_CACHE_SIXTEENTH_8 24
+# define R300_TX_CACHE_SIXTEENTH_9 25
+# define R300_TX_CACHE_SIXTEENTH_10 26
+# define R300_TX_CACHE_SIXTEENTH_11 27
+# define R300_TX_CACHE_SIXTEENTH_12 28
+# define R300_TX_CACHE_SIXTEENTH_13 29
+# define R300_TX_CACHE_SIXTEENTH_14 30
+# define R300_TX_CACHE_SIXTEENTH_15 31
+
#define R300_TX_FORMAT2_0 0x4500 /* obvious missing in gap */
# define R300_TX_PITCHMASK_SHIFT 0
# define R300_TX_PITCHMASK_MASK (2047 << 0)
# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 13)
# define R300_PFS_CNTL_TEX_END_SHIFT 18
# define R300_PFS_CNTL_TEX_END_MASK (31 << 18)
+# define R400_PFS_CNTL_TEX_OFFSET_MSB_SHIFT 24
+# define R400_PFS_CNTL_TEX_OFFSET_MSB_MASK (0xf << 24)
+# define R400_PFS_CNTL_TEX_END_MSB_SHIFT 28
+# define R400_PFS_CNTL_TEX_END_MSB_MASK (0xf << 28)
/* gap */
# define R300_TEX_SIZE_MASK (31 << 17)
# define R300_RGBA_OUT (1 << 22)
# define R300_W_OUT (1 << 23)
+# define R400_TEX_START_MSB_SHIFT 24
+# define R400_TEX_START_MSG_MASK (0xf << 24)
+# define R400_TEX_SIZE_MSB_SHIFT 28
+# define R400_TEX_SIZE_MSG_MASK (0xf << 28)
/* TEX
* As far as I can tell, texture instructions cannot write into output
# define R300_TEX_OP_TXP 3
# define R300_TEX_OP_TXB 4
# define R300_TEX_INST_MASK (7 << 15)
+# define R400_SRC_ADDR_EXT_BIT (1 << 19)
+# define R400_DST_ADDR_EXT_BIT (1 << 20)
/* Output format from the unfied shader */
#define R300_US_OUT_FMT_0 0x46A4
* The destination register index is in FPI1 (color) and FPI3 (alpha)
* together with enable bits.
* There are separate enable bits for writing into temporary registers
- * (DSTC_REG_* /DSTA_REG) and and program output registers (DSTC_OUTPUT_*
+ * (DSTC_REG_* /DSTA_REG) and program output registers (DSTC_OUTPUT_*
* /DSTA_OUTPUT). You can write to both at once, or not write at all (the
* same index must be used for both).
*
# define R300_ALU_OUTA_CLAMP (1 << 30)
/* END: Fragment program instruction set */
+/* R4xx extended fragment shader registers. */
+#define R400_US_ALU_EXT_ADDR_0 0x4ac0 /* up to 63 (0x4bbc) */
+# define R400_ADDR_EXT_RGB_MSB_BIT(x) (1 << (x))
+# define R400_ADDRD_EXT_RGB_MSB_BIT 0x08
+# define R400_ADDR_EXT_A_MSB_BIT(x) (1 << ((x) + 4))
+# define R400_ADDRD_EXT_A_MSB_BIT 0x80
+
+#define R400_US_CODE_BANK 0x46b8
+# define R400_BANK_SHIFT 0
+# define R400_BANK_MASK 0xf
+# define R400_R390_MODE_ENABLE (1 << 4)
+#define R400_US_CODE_EXT 0x46bc
+# define R400_ALU_OFFSET_MSB_SHIFT 0
+# define R400_ALU_OFFSET_MSB_MASK (0x7 << 0)
+# define R400_ALU_SIZE_MSB_SHIFT 3
+# define R400_ALU_SIZE_MSB_MASK (0x7 << 3)
+# define R400_ALU_START0_MSB_SHIFT 6
+# define R400_ALU_START0_MSB_MASK (0x7 << 6)
+# define R400_ALU_SIZE0_MSB_SHIFT 9
+# define R400_ALU_SIZE0_MSB_MASK (0x7 << 9)
+# define R400_ALU_START1_MSB_SHIFT 12
+# define R400_ALU_START1_MSB_MASK (0x7 << 12)
+# define R400_ALU_SIZE1_MSB_SHIFT 15
+# define R400_ALU_SIZE1_MSB_MASK (0x7 << 15)
+# define R400_ALU_START2_MSB_SHIFT 18
+# define R400_ALU_START2_MSB_MASK (0x7 << 18)
+# define R400_ALU_SIZE2_MSB_SHIFT 21
+# define R400_ALU_SIZE2_MSB_MASK (0x7 << 21)
+# define R400_ALU_START3_MSB_SHIFT 24
+# define R400_ALU_START3_MSB_MASK (0x7 << 24)
+# define R400_ALU_SIZE3_MSB_SHIFT 27
+# define R400_ALU_SIZE3_MSB_MASK (0x7 << 27)
+/* END: R4xx extended fragment shader registers. */
+
/* Fog: Fog Blending Enable */
#define R300_FG_FOG_BLEND 0x4bc0
# define R300_FG_FOG_BLEND_DISABLE (0 << 0)
#define R300_ZB_BW_CNTL 0x4f1c
# define R300_HIZ_DISABLE (0 << 0)
# define R300_HIZ_ENABLE (1 << 0)
-# define R300_HIZ_MIN (0 << 1)
-# define R300_HIZ_MAX (1 << 1)
+# define R300_HIZ_MAX (0 << 1)
+# define R300_HIZ_MIN (1 << 1)
# define R300_FAST_FILL_DISABLE (0 << 2)
# define R300_FAST_FILL_ENABLE (1 << 2)
# define R300_RD_COMP_DISABLE (0 << 3)
# define R300_WR_COMP_DISABLE (0 << 4)
# define R300_WR_COMP_ENABLE (1 << 4)
# define R300_ZB_CB_CLEAR_RMW (0 << 5)
-# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
+# define R300_ZB_CB_CLEAR_CACHE_LINE_WRITE_ONLY (1 << 5)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
/* Z Buffer Clear Value */
#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+/* Z Mask RAM is a Z compression buffer.
+ * Each dword of the Z Mask contains compression info for 16 4x4 pixel blocks,
+ * that is 2 bits for each block.
+ * On chips with 2 Z pipes, every other dword maps to a different pipe.
+ */
+
+/* The dword offset into Z mask RAM (bits 18:4) */
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+
+/* Z Mask Pitch. */
+#define R300_ZB_ZMASK_PITCH 0x4f34
+
+/* Access to Z Mask RAM in a manner similar to HiZ RAM.
+ * The indices are autoincrementing. */
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
+
/* Hierarchical Z Memory Offset */
#define R300_ZB_HIZ_OFFSET 0x4f44
# define R500_FC_B_OP0_NONE (0 << 24)
# define R500_FC_B_OP0_DECR (1 << 24)
# define R500_FC_B_OP0_INCR (2 << 24)
-# define R500_FC_B_OP1_DECR (0 << 26)
-# define R500_FC_B_OP1_NONE (1 << 26)
+# define R500_FC_B_OP1_NONE (0 << 26)
+# define R500_FC_B_OP1_DECR (1 << 26)
# define R500_FC_B_OP1_INCR (2 << 26)
# define R500_FC_IGNORE_UNCOVERED (1 << 28)
#define R500_US_FC_INT_CONST_0 0x4c00
# define R300_W_SRC_US (0 << 2)
# define R300_W_SRC_RAS (1 << 2)
-
/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
* Two parameter dwords:
* 0. VAP_VTX_FMT: The first parameter is not written to hardware
* the last block is omitted.
*/
#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00
-
+# define R300_VC_FORCE_PREFETCH (1 << 5)
# define R300_VBPNTR_SIZE0(x) ((x) >> 2)
# define R300_VBPNTR_STRIDE0(x) (((x) >> 2) << 8)
# define R300_VBPNTR_SIZE1(x) (((x) >> 2) << 16)
# define R300_VBPNTR_STRIDE1(x) (((x) >> 2) << 24)
+#define R300_PACKET3_3D_CLEAR_ZMASK 0x00003200
#define R300_PACKET3_INDX_BUFFER 0x00003300
# define R300_INDX_BUFFER_DST_SHIFT 0
# define R300_INDX_BUFFER_SKIP_SHIFT 16
# define RADEON_WAIT_3D_IDLECLEAN (1 << 17)
# define RADEON_WAIT_HOST_IDLECLEAN (1 << 18)
+#define R200_3D_DRAW_IMMD_2 0xC0003500
+
+#define RADEON_CP_PACKET0 0x0 /* XXX stolen from radeon_reg.h */
#define RADEON_CP_PACKET3 0xC0000000
-#define R200_3D_DRAW_IMMD_2 0xC0003500
+#define RADEON_ONE_REG_WR (1 << 15)
+
+#define CP_PACKET0(register, count) \
+ (RADEON_CP_PACKET0 | ((count) << 16) | ((register) >> 2))
+
+#define CP_PACKET3(op, count) \
+ (RADEON_CP_PACKET3 | (op) | ((count) << 16))
#endif /* _R300_REG_H */
projects / mesa.git / blobdiff