/* index size - when not set the indices are assumed to be 16 bit */
# define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11)
+# define R500_VAP_VF_CNTL__USE_ALT_NUM_VERTS (1<<14)
/* number of vertices */
# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16
#define R500_VAP_INDEX_OFFSET 0x208c
+#define R500_VAP_ALT_NUM_VERTICES 0x2088
+
#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090
# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0)
# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT (1<<1)
# define R300_DATA_TYPE_SHORT_4 7
# define R300_DATA_TYPE_VECTOR_3_TTT 8
# define R300_DATA_TYPE_VECTOR_3_EET 9
+# define R300_DATA_TYPE_FLOAT_8 10
+# define R300_DATA_TYPE_FLT16_2 11
+# define R300_DATA_TYPE_FLT16_4 12
# define R300_SKIP_DWORDS_SHIFT 4
# define R300_DST_VEC_LOC_SHIFT 8
# define R300_LAST_VEC (1 << 13)
# define R300_PVS_CONST_START 512
# define R500_PVS_CONST_START 1024
# define R300_MAX_PVS_CONST_VECS 256
-# define R500_MAX_PVS_CONST_VECS 1024
+# define R500_MAX_PVS_CONST_VECS 256
# define R300_PVS_UCP_START 1024
# define R500_PVS_UCP_START 1536
# define R300_POINT_VPORT_SCALE_OFFSET 1030
#define R300_VAP_GB_HORZ_CLIP_ADJ 0x2228
#define R300_VAP_GB_HORZ_DISC_ADJ 0x222c
+#define R300_VAP_PVS_FLOW_CNTL_ADDRS_0 0x2230
+#define R300_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 8)
+#define R300_PVS_FC_LAST_INST(x) ((x) << 16)
+#define R300_PVS_FC_RTN_INST(x) ((x) << 24)
+
/* gap */
/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
# define R300_2288_R300 0x00750000 /* -- nh */
# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */
+#define R300_VAP_PVS_FLOW_CNTL_LOOP_INDEX_0 0x2290
+#define R300_PVS_FC_LOOP_INIT_VAL(x) ((x) << 0)
+#define R300_PVS_FC_LOOP_STEP_VAL(x) ((x) << 8)
+
/* gap */
/* Addresses are relative to the vertex program instruction area of the
# define R300_PVS_FIRST_INST(x) ((x) << 0)
# define R300_PVS_XYZW_VALID_INST(x) ((x) << 10)
# define R300_PVS_LAST_INST(x) ((x) << 20)
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CONST_CNTL 0x22D4
# define R300_PVS_CONST_BASE_OFFSET_SHIFT 0
+# define R300_PVS_CONST_BASE_OFFSET(x) (x)
# define R300_PVS_MAX_CONST_ADDR_SHIFT 16
# define R300_PVS_MAX_CONST_ADDR(x) ((x) << 16)
#define R300_VAP_PVS_CODE_CNTL_1 0x22D8
# define R300_PVS_LAST_VTX_SRC_INST_SHIFT 0
#define R300_VAP_PVS_FLOW_CNTL_OPC 0x22DC
+#define R300_VAP_PVS_FC_OPC_JUMP(x) (1 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_LOOP(x) (2 << (2 * (x)))
+#define R300_VAP_PVS_FC_OPC_JSR(x) (3 << (2 * (x)))
/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
* immediate vertices
/* write 0 to indicate end of packet? */
#define R300_VAP_VTX_END_OF_PKT 0x24AC
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_LW_0 0x2500
+#define R500_PVS_FC_ACT_ADRS(x) ((x) << 0)
+#define R500_PVS_FC_LOOP_CNT_JMP_INST(x) ((x) << 16)
+
+#define R500_VAP_PVS_FLOW_CNTL_ADDRS_UW_0 0x2504
+#define R500_PVS_FC_LAST_INST(x) ((x) << 0)
+#define R500_PVS_FC_RTN_INST(x) ((x) << 16)
+
/* gap */
/* These are values from r300_reg/r300_reg.h - they are known to be correct
# define R300_GB_SUPER_TILE_B (1 << 15)
# define R300_GB_SUBPIXEL_1_12 (0 << 16)
# define R300_GB_SUBPIXEL_1_16 (1 << 16)
-# define GB_TILE_CONFIG_QUADS_PER_RAS_4 (0 << 17)
-# define GB_TILE_CONFIG_QUADS_PER_RAS_8 (1 << 17)
-# define GB_TILE_CONFIG_QUADS_PER_RAS_16 (2 << 17)
-# define GB_TILE_CONFIG_QUADS_PER_RAS_32 (3 << 17)
-# define GB_TILE_CONFIG_BB_SCAN_INTERCEPT (0 << 19)
-# define GB_TILE_CONFIG_BB_SCAN_BOUND_BOX (1 << 19)
-# define GB_TILE_CONFIG_ALT_SCAN_EN_LR (0 << 20)
-# define GB_TILE_CONFIG_ALT_SCAN_EN_LRL (1 << 20)
-# define GB_TILE_CONFIG_ALT_OFFSET (0 << 21)
-# define GB_TILE_CONFIG_SUBPRECISION (0 << 22)
-# define GB_TILE_CONFIG_ALT_TILING_DEF (0 << 23)
-# define GB_TILE_CONFIG_ALT_TILING_3_2 (1 << 23)
-# define GB_TILE_CONFIG_Z_EXTENDED_24_1 (0 << 24)
-# define GB_TILE_CONFIG_Z_EXTENDED_S25_1 (1 << 24)
+# define R300_GB_TILE_CONFIG_QUADS_PER_RAS_4 (0 << 17)
+# define R300_GB_TILE_CONFIG_QUADS_PER_RAS_8 (1 << 17)
+# define R300_GB_TILE_CONFIG_QUADS_PER_RAS_16 (2 << 17)
+# define R300_GB_TILE_CONFIG_QUADS_PER_RAS_32 (3 << 17)
+# define R300_GB_TILE_CONFIG_BB_SCAN_INTERCEPT (0 << 19)
+# define R300_GB_TILE_CONFIG_BB_SCAN_BOUND_BOX (1 << 19)
+# define R300_GB_TILE_CONFIG_ALT_SCAN_EN_LR (0 << 20)
+# define R300_GB_TILE_CONFIG_ALT_SCAN_EN_LRL (1 << 20)
+# define R300_GB_TILE_CONFIG_ALT_OFFSET (0 << 21)
+# define R300_GB_TILE_CONFIG_SUBPRECISION (0 << 22)
+# define R300_GB_TILE_CONFIG_ALT_TILING_DEF (0 << 23)
+# define R300_GB_TILE_CONFIG_ALT_TILING_3_2 (1 << 23)
+# define R300_GB_TILE_CONFIG_Z_EXTENDED_24_1 (0 << 24)
+# define R300_GB_TILE_CONFIG_Z_EXTENDED_S25_1 (1 << 24)
/* Specifies the sizes of the various FIFO`s in the sc/rs/us. This register must be the first one written */
#define R300_GB_FIFO_SIZE 0x4024
# define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */
# define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24
-#define GB_Z_PEQ_CONFIG 0x4028
-# define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_4_4 (0 << 0)
-# define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8 (1 << 0)
+#define R300_GB_Z_PEQ_CONFIG 0x4028
+# define R300_GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_4_4 (0 << 0)
+# define R300_GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8 (1 << 0)
/* Specifies various polygon specific selects (fog, depth, perspective). */
#define R300_GB_SELECT 0x401c
/* Specifies the graphics pipeline configuration for antialiasing. */
#define R300_GB_AA_CONFIG 0x4020
-# define GB_AA_CONFIG_AA_DISABLE (0 << 0)
-# define GB_AA_CONFIG_AA_ENABLE (1 << 0)
-# define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_2 (0 << 1)
-# define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_3 (1 << 1)
-# define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_4 (2 << 1)
-# define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_6 (3 << 1)
+# define R300_GB_AA_CONFIG_AA_DISABLE (0 << 0)
+# define R300_GB_AA_CONFIG_AA_ENABLE (1 << 0)
+# define R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_2 (0 << 1)
+# define R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_3 (1 << 1)
+# define R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_4 (2 << 1)
+# define R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_6 (3 << 1)
/* Selects which of 4 pipes are active. */
-#define GB_PIPE_SELECT 0x402c
-# define GB_PIPE_SELECT_PIPE0_ID_SHIFT 0
-# define GB_PIPE_SELECT_PIPE1_ID_SHIFT 2
-# define GB_PIPE_SELECT_PIPE2_ID_SHIFT 4
-# define GB_PIPE_SELECT_PIPE3_ID_SHIFT 6
-# define GB_PIPE_SELECT_PIPE_MASK_SHIFT 8
-# define GB_PIPE_SELECT_MAX_PIPE 12
-# define GB_PIPE_SELECT_BAD_PIPES 14
-# define GB_PIPE_SELECT_CONFIG_PIPES 18
+#define R300_GB_PIPE_SELECT 0x402c
+# define R300_GB_PIPE_SELECT_PIPE0_ID_SHIFT 0
+# define R300_GB_PIPE_SELECT_PIPE1_ID_SHIFT 2
+# define R300_GB_PIPE_SELECT_PIPE2_ID_SHIFT 4
+# define R300_GB_PIPE_SELECT_PIPE3_ID_SHIFT 6
+# define R300_GB_PIPE_SELECT_PIPE_MASK_SHIFT 8
+# define R300_GB_PIPE_SELECT_MAX_PIPE 12
+# define R300_GB_PIPE_SELECT_BAD_PIPES 14
+# define R300_GB_PIPE_SELECT_CONFIG_PIPES 18
/* Specifies the sizes of the various FIFO`s in the sc/rs. */
-#define GB_FIFO_SIZE1 0x4070
+#define R300_GB_FIFO_SIZE1 0x4070
/* High water mark for SC input fifo */
-# define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_SHIFT 0
-# define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_MASK 0x0000003f
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_SHIFT 0
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_MASK 0x0000003f
/* High water mark for SC input fifo (B) */
-# define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_SHIFT 6
-# define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_MASK 0x00000fc0
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_SHIFT 6
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_MASK 0x00000fc0
/* High water mark for RS colors' fifo */
-# define GB_FIFO_SIZE1_SC_HIGHWATER_COL_SHIFT 12
-# define GB_FIFO_SIZE1_SC_HIGHWATER_COL_MASK 0x0003f000
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_COL_SHIFT 12
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_COL_MASK 0x0003f000
/* High water mark for RS textures' fifo */
-# define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_SHIFT 18
-# define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_MASK 0x00fc0000
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_TEX_SHIFT 18
+# define R300_GB_FIFO_SIZE1_SC_HIGHWATER_TEX_MASK 0x00fc0000
/* This table specifies the source location and format for up to 16 texture
* addresses (i[0]:i[15]) and four colors (c[0]:c[3])
# define R500_RS_INST_TEX_ID(x) ((x) << 0)
#define R500_RS_INST_TEX_CN_WRITE (1 << 4)
#define R500_RS_INST_TEX_ADDR_SHIFT 5
-# define R500_RS_INST_TEX_ADDR(x) ((x) << 0)
+# define R500_RS_INST_TEX_ADDR(x) ((x) << 5)
#define R500_RS_INST_COL_ID_SHIFT 12
# define R500_RS_INST_COL_ID(x) ((x) << 12)
#define R500_RS_INST_COL_CN_NO_WRITE (0 << 16)
# define R300_TX_MIN_FILTER_MIP_NEAREST (1 << 13)
# define R300_TX_MIN_FILTER_MIP_LINEAR (2 << 13)
# define R300_TX_MIN_FILTER_MIP_MASK (3 << 13)
+# define R300_TX_MAX_MIP_LEVEL_SHIFT 17
+# define R300_TX_MAX_MIP_LEVEL_MASK (0xf << 17)
# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21)
# define R300_TX_MAX_ANISO_2_TO_1 (1 << 21)
# define R300_TX_MAX_ANISO_4_TO_1 (2 << 21)
# define R300_TX_MAX_ANISO_MASK (7 << 21)
# define R300_TX_WRAP_S(x) ((x) << 0)
# define R300_TX_WRAP_T(x) ((x) << 3)
+# define R300_TX_MAX_MIP_LEVEL(x) ((x) << 17)
#define R300_TX_FILTER1_0 0x4440
# define R300_CHROMA_KEY_MODE_DISABLE 0
# define R300_TX_TRI_PERF_3_8 (3<<15)
# define R300_ANISO_THRESHOLD_MASK (7<<17)
+# define R400_DXTC_SWIZZLE_ENABLE (1<<21)
# define R500_MACRO_SWITCH (1<<22)
+# define R500_TX_MAX_ANISO(x) ((x) << 23)
+# define R500_TX_MAX_ANISO_MASK (63 << 23)
+# define R500_TX_ANISO_HIGH_QUALITY (1 << 30)
# define R500_BORDER_FIX (1<<31)
#define R300_TX_FORMAT0_0 0x4480
# define R300_TX_HEIGHTMASK_MASK (2047 << 11)
# define R300_TX_DEPTHMASK_SHIFT 22
# define R300_TX_DEPTHMASK_MASK (0xf << 22)
-# define R300_TX_MAX_MIP_LEVEL_SHIFT 26
-# define R300_TX_MAX_MIP_LEVEL_MASK (0xf << 26)
# define R300_TX_SIZE_PROJECTED (1 << 30)
# define R300_TX_PITCH_EN (1 << 31)
# define R300_TX_WIDTH(x) ((x) << 0)
# define R300_TX_FORMAT_DXT1 0xF
# define R300_TX_FORMAT_DXT3 0x10
# define R300_TX_FORMAT_DXT5 0x11
-# define R300_TX_FORMAT_Y8 0x12
+# define R300_TX_FORMAT_CxV8U8 0x12
# define R300_TX_FORMAT_AVYU444 0x13
# define R300_TX_FORMAT_VYUY422 0x14
# define R300_TX_FORMAT_YVYU422 0x15
# define R300_TX_FORMAT_32F_32F 0x1C
# define R300_TX_FORMAT_32F_32F_32F_32F 0x1D
# define R300_TX_FORMAT_W24_FP 0x1E
+# define R400_TX_FORMAT_ATI2N 0x1F
+
+/* These need TX_FORMAT2_[0-15].TXFORMAT_MSB set.
+
+ My guess is the 10-bit formats are the 8-bit ones but with filtering being
+ performed with the precision of 10 bits per channel. This makes sense
+ with sRGB textures since the conversion to linear space reduces the precision
+ significantly so the shader gets approximately the 8-bit precision
+ in the end. It might also improve the quality of HDR rendering where
+ high-precision filtering is desirable.
+
+ Again, this is guessed, the formats might mean something entirely else.
+ The others should be fine. */
+# define R500_TX_FORMAT_X1 0x0
+# define R500_TX_FORMAT_X1_REV 0x1
+# define R500_TX_FORMAT_X10 0x2
+# define R500_TX_FORMAT_Y10X10 0x3
+# define R500_TX_FORMAT_W10Z10Y10X10 0x4
+# define R500_TX_FORMAT_ATI1N 0x5
+# define R500_TX_FORMAT_Y8X24 0x6
+
# define R300_TX_FORMAT_SIGNED_W (1 << 5)
# define R300_TX_FORMAT_SIGNED_Z (1 << 6)
# define R300_TX_FORMAT_3D (1 << 25)
# define R300_TX_FORMAT_CUBIC_MAP (2 << 25)
+# define R300_TX_FORMAT_TEX_COORD_TYPE_MASK (0x3 << 25)
/* alpha modes, convenience mostly */
/* if you have alpha, pick constant appropriate to the
# define R300_TX_FORMAT_GAMMA (1 << 21)
# define R300_TX_FORMAT_YUV_TO_RGB (1 << 22)
+# define R300_TX_CACHE(x) ((x) << 27)
+# define R300_TX_CACHE_WHOLE 0
+/* reserved */
+# define R300_TX_CACHE_HALF_0 2
+# define R300_TX_CACHE_HALF_1 3
+# define R300_TX_CACHE_FOURTH_0 4
+# define R300_TX_CACHE_FOURTH_1 5
+# define R300_TX_CACHE_FOURTH_2 6
+# define R300_TX_CACHE_FOURTH_3 7
+# define R300_TX_CACHE_EIGHTH_0 8
+# define R300_TX_CACHE_EIGHTH_1 9
+# define R300_TX_CACHE_EIGHTH_2 10
+# define R300_TX_CACHE_EIGHTH_3 11
+# define R300_TX_CACHE_EIGHTH_4 12
+# define R300_TX_CACHE_EIGHTH_5 13
+# define R300_TX_CACHE_EIGHTH_6 14
+# define R300_TX_CACHE_EIGHTH_7 15
+# define R300_TX_CACHE_SIXTEENTH_0 16
+# define R300_TX_CACHE_SIXTEENTH_1 17
+# define R300_TX_CACHE_SIXTEENTH_2 18
+# define R300_TX_CACHE_SIXTEENTH_3 19
+# define R300_TX_CACHE_SIXTEENTH_4 20
+# define R300_TX_CACHE_SIXTEENTH_5 21
+# define R300_TX_CACHE_SIXTEENTH_6 22
+# define R300_TX_CACHE_SIXTEENTH_7 23
+# define R300_TX_CACHE_SIXTEENTH_8 24
+# define R300_TX_CACHE_SIXTEENTH_9 25
+# define R300_TX_CACHE_SIXTEENTH_10 26
+# define R300_TX_CACHE_SIXTEENTH_11 27
+# define R300_TX_CACHE_SIXTEENTH_12 28
+# define R300_TX_CACHE_SIXTEENTH_13 29
+# define R300_TX_CACHE_SIXTEENTH_14 30
+# define R300_TX_CACHE_SIXTEENTH_15 31
+
#define R300_TX_FORMAT2_0 0x4500 /* obvious missing in gap */
# define R300_TX_PITCHMASK_SHIFT 0
# define R300_TX_PITCHMASK_MASK (2047 << 0)
#define R300_TX_OFFSET_5 0x4554
#define R300_TX_OFFSET_6 0x4558
#define R300_TX_OFFSET_7 0x455C
- /* BEGIN: Guess from R200 */
+
# define R300_TXO_ENDIAN_NO_SWAP (0 << 0)
# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0)
# define R300_TXO_ENDIAN_WORD_SWAP (2 << 0)
# define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0)
-# define R300_TXO_MACRO_TILE (1 << 2)
+# define R300_TXO_MACRO_TILE_LINEAR (0 << 2)
+# define R300_TXO_MACRO_TILE_TILED (1 << 2)
+# define R300_TXO_MACRO_TILE(x) ((x) << 2)
# define R300_TXO_MICRO_TILE_LINEAR (0 << 3)
-# define R300_TXO_MICRO_TILE (1 << 3)
-# define R300_TXO_MICRO_TILE_SQUARE (2 << 3)
+# define R300_TXO_MICRO_TILE_TILED (1 << 3)
+# define R300_TXO_MICRO_TILE_TILED_SQUARE (2 << 3)
+# define R300_TXO_MICRO_TILE(x) ((x) << 3)
# define R300_TXO_OFFSET_MASK 0xffffffe0
# define R300_TXO_OFFSET_SHIFT 5
- /* END: Guess from R200 */
/* 32 bit chroma key */
#define R300_TX_CHROMA_KEY_0 0x4580
# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 13)
# define R300_PFS_CNTL_TEX_END_SHIFT 18
# define R300_PFS_CNTL_TEX_END_MASK (31 << 18)
+# define R400_PFS_CNTL_TEX_OFFSET_MSB_SHIFT 24
+# define R400_PFS_CNTL_TEX_OFFSET_MSB_MASK (0xf << 24)
+# define R400_PFS_CNTL_TEX_END_MSB_SHIFT 28
+# define R400_PFS_CNTL_TEX_END_MSB_MASK (0xf << 28)
/* gap */
# define R300_TEX_SIZE_MASK (31 << 17)
# define R300_RGBA_OUT (1 << 22)
# define R300_W_OUT (1 << 23)
+# define R400_TEX_START_MSB_SHIFT 24
+# define R400_TEX_START_MSG_MASK (0xf << 24)
+# define R400_TEX_SIZE_MSB_SHIFT 28
+# define R400_TEX_SIZE_MSG_MASK (0xf << 28)
/* TEX
* As far as I can tell, texture instructions cannot write into output
# define R300_TEX_OP_TXP 3
# define R300_TEX_OP_TXB 4
# define R300_TEX_INST_MASK (7 << 15)
+# define R400_SRC_ADDR_EXT_BIT (1 << 19)
+# define R400_DST_ADDR_EXT_BIT (1 << 20)
/* Output format from the unfied shader */
#define R300_US_OUT_FMT_0 0x46A4
* The destination register index is in FPI1 (color) and FPI3 (alpha)
* together with enable bits.
* There are separate enable bits for writing into temporary registers
- * (DSTC_REG_* /DSTA_REG) and and program output registers (DSTC_OUTPUT_*
+ * (DSTC_REG_* /DSTA_REG) and program output registers (DSTC_OUTPUT_*
* /DSTA_OUTPUT). You can write to both at once, or not write at all (the
* same index must be used for both).
*
# define R300_ALU_OUTA_CLAMP (1 << 30)
/* END: Fragment program instruction set */
+/* R4xx extended fragment shader registers. */
+#define R400_US_ALU_EXT_ADDR_0 0x4ac0 /* up to 63 (0x4bbc) */
+# define R400_ADDR0_EXT_RGB_MSB_BIT 0x01
+# define R400_ADDR1_EXT_RGB_MSB_BIT 0x02
+# define R400_ADDR2_EXT_RGB_MSB_BIT 0x04
+# define R400_ADDRD_EXT_RGB_MSB_BIT 0x08
+# define R400_ADDR0_EXT_A_MSB_BIT 0x10
+# define R400_ADDR1_EXT_A_MSB_BIT 0x20
+# define R400_ADDR2_EXT_A_MSB_BIT 0x40
+# define R400_ADDRD_EXT_A_MSB_BIT 0x80
+#define R400_US_CODE_BANK 0x46b8
+# define R400_BANK_SHIFT 0
+# define R400_BANK_MASK 0xf
+# define R400_R390_MODE_ENABLE (1 << 4)
+#define R400_US_CODE_EXT 0x46bc
+# define R400_ALU_OFFSET_MSB_SHIFT 0
+# define R400_ALU_OFFSET_MSB_MASK (0x7 << 0)
+# define R400_ALU_SIZE_MSB_SHIFT 3
+# define R400_ALU_SIZE_MSB_MASK (0x7 << 3)
+# define R400_ALU_START0_MSB_SHIFT 6
+# define R400_ALU_START0_MSB_MASK (0x7 << 6)
+# define R400_ALU_SIZE0_MSB_SHIFT 9
+# define R400_ALU_SIZE0_MSB_MASK (0x7 << 9)
+# define R400_ALU_START1_MSB_SHIFT 12
+# define R400_ALU_START1_MSB_MASK (0x7 << 12)
+# define R400_ALU_SIZE1_MSB_SHIFT 15
+# define R400_ALU_SIZE1_MSB_MASK (0x7 << 15)
+# define R400_ALU_START2_MSB_SHIFT 18
+# define R400_ALU_START2_MSB_MASK (0x7 << 18)
+# define R400_ALU_SIZE2_MSB_SHIFT 21
+# define R400_ALU_SIZE2_MSB_MASK (0x7 << 21)
+# define R400_ALU_START3_MSB_SHIFT 24
+# define R400_ALU_START3_MSB_MASK (0x7 << 24)
+# define R400_ALU_SIZE3_MSB_SHIFT 27
+# define R400_ALU_SIZE3_MSB_MASK (0x7 << 27)
+/* END: R4xx extended fragment shader registers. */
+
/* Fog: Fog Blending Enable */
#define R300_FG_FOG_BLEND 0x4bc0
# define R300_FG_FOG_BLEND_DISABLE (0 << 0)
/* Unpipelined. */
#define R300_RB3D_CCTL 0x4e00
+# define R300_RB3D_CCTL_NUM_MULTIWRITES(x) (MAX2(((x)-1), 0) << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_1_BUFFER (0 << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_2_BUFFERS (1 << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_3_BUFFERS (2 << 5)
# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_1 (4 << 3)
# define R300_DISCARD_SRC_PIXELS_SRC_COLOR_1 (5 << 3)
# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_COLOR_1 (6 << 3)
+# define R500_SRC_ALPHA_0_NO_READ (1 << 30)
+# define R500_SRC_ALPHA_1_NO_READ (1 << 31)
/* the following are shared between CBLEND and ABLEND */
# define R300_FCN_MASK (3 << 12)
# define R300_COLORPITCH_MASK 0x00003FFE
# define R300_COLOR_TILE_DISABLE (0 << 16)
# define R300_COLOR_TILE_ENABLE (1 << 16)
+# define R300_COLOR_TILE(x) ((x) << 16)
# define R300_COLOR_MICROTILE_DISABLE (0 << 17)
# define R300_COLOR_MICROTILE_ENABLE (1 << 17)
# define R300_COLOR_MICROTILE_ENABLE_SQUARE (2 << 17) /* Only available in 16-bit */
+# define R300_COLOR_MICROTILE(x) ((x) << 17)
# define R300_COLOR_ENDIAN_NO_SWAP (0 << 19)
# define R300_COLOR_ENDIAN_WORD_SWAP (1 << 19)
# define R300_COLOR_ENDIAN_DWORD_SWAP (2 << 19)
#define R300_ZB_BW_CNTL 0x4f1c
# define R300_HIZ_DISABLE (0 << 0)
# define R300_HIZ_ENABLE (1 << 0)
-# define R300_HIZ_MIN (0 << 1)
-# define R300_HIZ_MAX (1 << 1)
+# define R300_HIZ_MAX (0 << 1)
+# define R300_HIZ_MIN (1 << 1)
# define R300_FAST_FILL_DISABLE (0 << 2)
# define R300_FAST_FILL_ENABLE (1 << 2)
# define R300_RD_COMP_DISABLE (0 << 3)
# define R300_WR_COMP_DISABLE (0 << 4)
# define R300_WR_COMP_ENABLE (1 << 4)
# define R300_ZB_CB_CLEAR_RMW (0 << 5)
-# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
+# define R300_ZB_CB_CLEAR_CACHE_LINE_WRITE_ONLY (1 << 5)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
# define R300_DEPTHPITCH_MASK 0x00003FFC
# define R300_DEPTHMACROTILE_DISABLE (0 << 16)
# define R300_DEPTHMACROTILE_ENABLE (1 << 16)
+# define R300_DEPTHMACROTILE(x) ((x) << 16)
# define R300_DEPTHMICROTILE_LINEAR (0 << 17)
# define R300_DEPTHMICROTILE_TILED (1 << 17)
# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+# define R300_DEPTHMICROTILE(x) ((x) << 17)
# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
/* Z Buffer Clear Value */
#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+/* Z Mask RAM is a Z compression buffer.
+ * Each dword of the Z Mask contains compression info for 16 4x4 pixel blocks,
+ * that is 2 bits for each block.
+ * On chips with 2 Z pipes, every other dword maps to a different pipe.
+ */
+
+/* The dword offset into Z mask RAM (bits 18:4) */
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+
+/* Z Mask Pitch. */
+#define R300_ZB_ZMASK_PITCH 0x4f34
+
+/* Access to Z Mask RAM in a manner similar to HiZ RAM.
+ * The indices are autoincrementing. */
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
+
/* Hierarchical Z Memory Offset */
#define R300_ZB_HIZ_OFFSET 0x4f44
# define R500_FC_B_OP0_NONE (0 << 24)
# define R500_FC_B_OP0_DECR (1 << 24)
# define R500_FC_B_OP0_INCR (2 << 24)
-# define R500_FC_B_OP1_DECR (0 << 26)
-# define R500_FC_B_OP1_NONE (1 << 26)
+# define R500_FC_B_OP1_NONE (0 << 26)
+# define R500_FC_B_OP1_DECR (1 << 26)
# define R500_FC_B_OP1_INCR (2 << 26)
# define R500_FC_IGNORE_UNCOVERED (1 << 28)
#define R500_US_FC_INT_CONST_0 0x4c00
# define R300_W_SRC_US (0 << 2)
# define R300_W_SRC_RAS (1 << 2)
-
/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
* Two parameter dwords:
* 0. VAP_VTX_FMT: The first parameter is not written to hardware
* the last block is omitted.
*/
#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00
+# define R300_VC_FORCE_PREFETCH (1 << 5)
+# define R300_VBPNTR_SIZE0(x) ((x) >> 2)
+# define R300_VBPNTR_STRIDE0(x) (((x) >> 2) << 8)
+# define R300_VBPNTR_SIZE1(x) (((x) >> 2) << 16)
+# define R300_VBPNTR_STRIDE1(x) (((x) >> 2) << 24)
+#define R300_PACKET3_3D_CLEAR_ZMASK 0x00003200
#define R300_PACKET3_INDX_BUFFER 0x00003300
# define R300_INDX_BUFFER_DST_SHIFT 0
# define R300_INDX_BUFFER_SKIP_SHIFT 16
# define RADEON_WAIT_3D_IDLECLEAN (1 << 17)
# define RADEON_WAIT_HOST_IDLECLEAN (1 << 18)
+#define R200_3D_DRAW_IMMD_2 0xC0003500
+
+#define RADEON_CP_PACKET0 0x0 /* XXX stolen from radeon_reg.h */
#define RADEON_CP_PACKET3 0xC0000000
-#define R200_3D_DRAW_IMMD_2 0xC0003500
+#define RADEON_ONE_REG_WR (1 << 15)
+
+#define CP_PACKET0(register, count) \
+ (RADEON_CP_PACKET0 | ((count) << 16) | ((register) >> 2))
+
+#define CP_PACKET3(op, count) \
+ (RADEON_CP_PACKET3 | (op) | ((count) << 16))
#endif /* _R300_REG_H */