vc4_emit_state(struct pipe_context *pctx)
{
struct vc4_context *vc4 = vc4_context(pctx);
+ struct vc4_job *job = vc4->job;
- struct vc4_cl_out *bcl = cl_start(&vc4->bcl);
if (vc4->dirty & (VC4_DIRTY_SCISSOR | VC4_DIRTY_VIEWPORT |
VC4_DIRTY_RASTERIZER)) {
float *vpscale = vc4->viewport.scale;
if (!vc4->rasterizer->base.scissor) {
minx = MAX2(vp_minx, 0);
miny = MAX2(vp_miny, 0);
- maxx = MIN2(vp_maxx, vc4->draw_width);
- maxy = MIN2(vp_maxy, vc4->draw_height);
+ maxx = MIN2(vp_maxx, job->draw_width);
+ maxy = MIN2(vp_maxy, job->draw_height);
} else {
minx = MAX2(vp_minx, vc4->scissor.minx);
miny = MAX2(vp_miny, vc4->scissor.miny);
maxy = MIN2(vp_maxy, vc4->scissor.maxy);
}
- cl_u8(&bcl, VC4_PACKET_CLIP_WINDOW);
- cl_u16(&bcl, minx);
- cl_u16(&bcl, miny);
- cl_u16(&bcl, maxx - minx);
- cl_u16(&bcl, maxy - miny);
+ cl_emit(&job->bcl, CLIP_WINDOW, clip) {
+ clip.clip_window_left_pixel_coordinate = minx;
+ clip.clip_window_bottom_pixel_coordinate = miny;
+ clip.clip_window_height_in_pixels = maxy - miny;
+ clip.clip_window_width_in_pixels = maxx - minx;
+ }
- vc4->draw_min_x = MIN2(vc4->draw_min_x, minx);
- vc4->draw_min_y = MIN2(vc4->draw_min_y, miny);
- vc4->draw_max_x = MAX2(vc4->draw_max_x, maxx);
- vc4->draw_max_y = MAX2(vc4->draw_max_y, maxy);
+ job->draw_min_x = MIN2(job->draw_min_x, minx);
+ job->draw_min_y = MIN2(job->draw_min_y, miny);
+ job->draw_max_x = MAX2(job->draw_max_x, maxx);
+ job->draw_max_y = MAX2(job->draw_max_y, maxy);
}
- if (vc4->dirty & (VC4_DIRTY_RASTERIZER | VC4_DIRTY_ZSA)) {
+ if (vc4->dirty & (VC4_DIRTY_RASTERIZER |
+ VC4_DIRTY_ZSA |
+ VC4_DIRTY_COMPILED_FS)) {
uint8_t ez_enable_mask_out = ~0;
+ uint8_t rasosm_mask_out = ~0;
+ struct vc4_cl_out *bcl = cl_start(&job->bcl);
/* HW-2905: If the RCL ends up doing a full-res load when
* multisampling, then early Z tracking may end up with values
* from the previous tile due to a HW bug. Disable it to
* was seeing bad rendering on glxgears -samples 4 even in
* that case.
*/
- if (vc4->msaa)
+ if (job->msaa || vc4->prog.fs->disable_early_z)
ez_enable_mask_out &= ~VC4_CONFIG_BITS_EARLY_Z;
+ /* Don't set the rasterizer to oversample if we're doing our
+ * binning and load/stores in single-sample mode. This is for
+ * the samples == 1 case, where vc4 doesn't do any
+ * multisampling behavior.
+ */
+ if (!job->msaa) {
+ rasosm_mask_out &=
+ ~VC4_CONFIG_BITS_RASTERIZER_OVERSAMPLE_4X;
+ }
+
cl_u8(&bcl, VC4_PACKET_CONFIGURATION_BITS);
cl_u8(&bcl,
- vc4->rasterizer->config_bits[0] |
- vc4->zsa->config_bits[0]);
+ (vc4->rasterizer->config_bits[0] |
+ vc4->zsa->config_bits[0]) & rasosm_mask_out);
cl_u8(&bcl,
vc4->rasterizer->config_bits[1] |
vc4->zsa->config_bits[1]);
cl_u8(&bcl,
(vc4->rasterizer->config_bits[2] |
vc4->zsa->config_bits[2]) & ez_enable_mask_out);
+ cl_end(&job->bcl, bcl);
}
if (vc4->dirty & VC4_DIRTY_RASTERIZER) {
- cl_u8(&bcl, VC4_PACKET_DEPTH_OFFSET);
- cl_u16(&bcl, vc4->rasterizer->offset_factor);
- cl_u16(&bcl, vc4->rasterizer->offset_units);
-
- cl_u8(&bcl, VC4_PACKET_POINT_SIZE);
- cl_f(&bcl, vc4->rasterizer->point_size);
-
- cl_u8(&bcl, VC4_PACKET_LINE_WIDTH);
- cl_f(&bcl, vc4->rasterizer->base.line_width);
+ cl_emit_prepacked(&job->bcl, &vc4->rasterizer->packed);
}
if (vc4->dirty & VC4_DIRTY_VIEWPORT) {
- cl_u8(&bcl, VC4_PACKET_CLIPPER_XY_SCALING);
- cl_f(&bcl, vc4->viewport.scale[0] * 16.0f);
- cl_f(&bcl, vc4->viewport.scale[1] * 16.0f);
+ cl_emit(&job->bcl, CLIPPER_XY_SCALING, clip) {
+ clip.viewport_half_width_in_1_16th_of_pixel =
+ vc4->viewport.scale[0] * 16.0f;
+ clip.viewport_half_height_in_1_16th_of_pixel =
+ vc4->viewport.scale[1] * 16.0f;
+ }
- cl_u8(&bcl, VC4_PACKET_CLIPPER_Z_SCALING);
- cl_f(&bcl, vc4->viewport.translate[2]);
- cl_f(&bcl, vc4->viewport.scale[2]);
+ cl_emit(&job->bcl, CLIPPER_Z_SCALE_AND_OFFSET, clip) {
+ clip.viewport_z_offset_zc_to_zs =
+ vc4->viewport.translate[2];
+ clip.viewport_z_scale_zc_to_zs =
+ vc4->viewport.scale[2];
+ }
- cl_u8(&bcl, VC4_PACKET_VIEWPORT_OFFSET);
- cl_u16(&bcl, 16 * vc4->viewport.translate[0]);
- cl_u16(&bcl, 16 * vc4->viewport.translate[1]);
+ cl_emit(&job->bcl, VIEWPORT_OFFSET, vp) {
+ vp.viewport_centre_x_coordinate =
+ vc4->viewport.translate[0];
+ vp.viewport_centre_y_coordinate =
+ vc4->viewport.translate[1];
+ }
}
if (vc4->dirty & VC4_DIRTY_FLAT_SHADE_FLAGS) {
- cl_u8(&bcl, VC4_PACKET_FLAT_SHADE_FLAGS);
- cl_u32(&bcl, vc4->rasterizer->base.flatshade ?
- vc4->prog.fs->color_inputs : 0);
+ cl_emit(&job->bcl, FLAT_SHADE_FLAGS, flags) {
+ if (vc4->rasterizer->base.flatshade)
+ flags.flat_shading_flags =
+ vc4->prog.fs->color_inputs;
+ }
}
-
- cl_end(&vc4->bcl, bcl);
}
projects / mesa.git / blobdiff