* Implementation limits
*/
#define PIPE_MAX_ATTRIBS 32
-#define PIPE_MAX_CLIP_PLANES 6
+#define PIPE_MAX_CLIP_PLANES 8
#define PIPE_MAX_COLOR_BUFS 8
#define PIPE_MAX_CONSTANT_BUFFERS 32
#define PIPE_MAX_SAMPLERS 16
-#define PIPE_MAX_VERTEX_SAMPLERS 16
-#define PIPE_MAX_GEOMETRY_SAMPLERS 16
#define PIPE_MAX_SHADER_INPUTS 32
-#define PIPE_MAX_SHADER_OUTPUTS 32
+#define PIPE_MAX_SHADER_OUTPUTS 48 /* 32 GENERICs + POS, PSIZE, FOG, etc. */
+#define PIPE_MAX_SHADER_SAMPLER_VIEWS 32
+#define PIPE_MAX_SHADER_RESOURCES 32
#define PIPE_MAX_TEXTURE_LEVELS 16
#define PIPE_MAX_SO_BUFFERS 4
{
unsigned flatshade:1;
unsigned light_twoside:1;
+ unsigned clamp_vertex_color:1;
+ unsigned clamp_fragment_color:1;
unsigned front_ccw:1;
unsigned cull_face:2; /**< PIPE_FACE_x */
unsigned fill_front:2; /**< PIPE_POLYGON_MODE_x */
unsigned poly_smooth:1;
unsigned poly_stipple_enable:1;
unsigned point_smooth:1;
- unsigned sprite_coord_enable:PIPE_MAX_SHADER_OUTPUTS;
unsigned sprite_coord_mode:1; /**< PIPE_SPRITE_COORD_ */
unsigned point_quad_rasterization:1; /** points rasterized as quads or points */
unsigned point_size_per_vertex:1; /**< size computed in vertex shader */
unsigned multisample:1; /* XXX maybe more ms state in future */
unsigned line_smooth:1;
unsigned line_stipple_enable:1;
- unsigned line_stipple_factor:8; /**< [1..256] actually */
- unsigned line_stipple_pattern:16;
unsigned line_last_pixel:1;
- /**
+ /**
* Use the first vertex of a primitive as the provoking vertex for
* flat shading.
*/
- unsigned flatshade_first:1;
+ unsigned flatshade_first:1;
- /**
+ /**
* When true, triangle rasterization uses (0.5, 0.5) pixel centers
* for determining pixel ownership.
*
*/
unsigned gl_rasterization_rules:1;
+ /**
+ * When true, rasterization is disabled and no pixels are written.
+ * This only makes sense with the Stream Out functionality.
+ */
+ unsigned rasterizer_discard:1;
+
+ /**
+ * When false, depth clipping is disabled and the depth value will be
+ * clamped later at the per-pixel level before depth testing.
+ * This depends on PIPE_CAP_DEPTH_CLIP_DISABLE.
+ */
+ unsigned depth_clip:1;
+
+ /**
+ * Enable bits for clipping half-spaces.
+ * This applies to both user clip planes and shader clip distances.
+ * Note that if the bound shader exports any clip distances, these
+ * replace all user clip planes, and clip half-spaces enabled here
+ * but not written by the shader count as disabled.
+ */
+ unsigned clip_plane_enable:PIPE_MAX_CLIP_PLANES;
+
+ unsigned line_stipple_factor:8; /**< [1..256] actually */
+ unsigned line_stipple_pattern:16;
+
+ uint32_t sprite_coord_enable; /* referring to 32 TEXCOORD/GENERIC inputs */
+
float line_width;
float point_size; /**< used when no per-vertex size */
float offset_units;
float offset_scale;
+ float offset_clamp;
};
struct pipe_clip_state
{
float ucp[PIPE_MAX_CLIP_PLANES][4];
- unsigned nr;
- unsigned depth_clamp:1;
+};
+
+
+/**
+ * Stream output for vertex transform feedback.
+ */
+struct pipe_stream_output_info
+{
+ unsigned num_outputs;
+ /** stride for an entire vertex for each buffer in dwords */
+ unsigned stride[PIPE_MAX_SO_BUFFERS];
+
+ /**
+ * Array of stream outputs, in the order they are to be written in.
+ * Selected components are tightly packed into the output buffer.
+ */
+ struct {
+ unsigned register_index:8; /**< 0 to PIPE_MAX_SHADER_OUTPUTS */
+ unsigned start_component:2; /** 0 to 3 */
+ unsigned num_components:3; /** 1 to 4 */
+ unsigned output_buffer:3; /**< 0 to PIPE_MAX_SO_BUFFERS */
+ unsigned dst_offset:16; /**< offset into the buffer in dwords */
+ } output[PIPE_MAX_SHADER_OUTPUTS];
};
struct pipe_shader_state
{
const struct tgsi_token *tokens;
+ struct pipe_stream_output_info stream_output;
};
unsigned compare_func:3; /**< PIPE_FUNC_x */
unsigned normalized_coords:1; /**< Are coords normalized to [0,1]? */
unsigned max_anisotropy:6;
+ unsigned seamless_cube_map:1;
float lod_bias; /**< LOD/lambda bias */
float min_lod, max_lod; /**< LOD clamp range, after bias */
- float border_color[4];
+ union pipe_color_union border_color;
};
/**
- * 2D surface. This is basically a view into a memory buffer.
- * May be a renderbuffer, texture mipmap level, etc.
+ * A view into a texture that can be bound to a color render target /
+ * depth stencil attachment point.
*/
struct pipe_surface
{
struct pipe_reference reference;
struct pipe_resource *texture; /**< resource into which this is a view */
+ struct pipe_context *context; /**< context this surface belongs to */
enum pipe_format format;
+ /* XXX width/height should be removed */
unsigned width; /**< logical width in pixels */
unsigned height; /**< logical height in pixels */
- unsigned layout; /**< PIPE_SURFACE_LAYOUT_x */
- unsigned offset; /**< offset from start of buffer, in bytes */
- unsigned usage; /**< bitmask of PIPE_BIND_x */
-
- unsigned zslice;
- unsigned face;
- unsigned level;
+ unsigned writable:1; /**< writable shader resource */
+
+ union {
+ struct {
+ unsigned level;
+ unsigned first_layer:16;
+ unsigned last_layer:16;
+ } tex;
+ struct {
+ unsigned first_element;
+ unsigned last_element;
+ } buf;
+ } u;
};
enum pipe_format format; /**< typed PIPE_FORMAT_x */
struct pipe_resource *texture; /**< texture into which this is a view */
struct pipe_context *context; /**< context this view belongs to */
- unsigned first_level:8; /**< first mipmap level */
- unsigned last_level:8; /**< last mipmap level */
+ union {
+ struct {
+ unsigned first_layer:16; /**< first layer to use for array textures */
+ unsigned last_layer:16; /**< last layer to use for array textures */
+ unsigned first_level:8; /**< first mipmap level to use */
+ unsigned last_level:8; /**< last mipmap level to use */
+ } tex;
+ struct {
+ unsigned first_element;
+ unsigned last_element;
+ } buf;
+ } u;
unsigned swizzle_r:3; /**< PIPE_SWIZZLE_x for red component */
unsigned swizzle_g:3; /**< PIPE_SWIZZLE_x for green component */
unsigned swizzle_b:3; /**< PIPE_SWIZZLE_x for blue component */
*/
struct pipe_box
{
- unsigned x;
- unsigned y;
- unsigned z;
- unsigned width;
- unsigned height;
- unsigned depth;
+ int x;
+ int y;
+ int z;
+ int width;
+ int height;
+ int depth;
};
unsigned width0;
unsigned height0;
unsigned depth0;
+ unsigned array_size;
unsigned last_level:8; /**< Index of last mipmap level present/defined */
unsigned nr_samples:8; /**< for multisampled surfaces, nr of samples */
unsigned usage:8; /**< PIPE_USAGE_x (not a bitmask) */
- unsigned bind; /**< bitmask of PIPE_BIND_x */
- unsigned flags; /**< bitmask of PIPE_RESOURCE_FLAG_x */
-};
-
-struct pipe_stream_output_state
-{
- /**< number of the output buffer to insert each element into */
- int output_buffer[PIPE_MAX_SHADER_OUTPUTS];
- /**< which register to grab each output from */
- int register_index[PIPE_MAX_SHADER_OUTPUTS];
- /**< TGSI_WRITEMASK signifying which components to output */
- ubyte register_mask[PIPE_MAX_SHADER_OUTPUTS];
- /**< number of outputs */
- int num_outputs;
-
- /**< stride for an entire vertex, only used if all output_buffers
- * are 0 */
- unsigned stride;
-};
-
-/**
- * Extra indexing info for (cube) texture resources.
- */
-struct pipe_subresource
-{
- unsigned face:16;
- unsigned level:16;
+ unsigned bind; /**< bitmask of PIPE_BIND_x */
+ unsigned flags; /**< bitmask of PIPE_RESOURCE_FLAG_x */
};
struct pipe_transfer
{
struct pipe_resource *resource; /**< resource to transfer to/from */
- struct pipe_subresource sr;
+ unsigned level; /**< texture mipmap level */
enum pipe_transfer_usage usage;
- struct pipe_box box;
- unsigned stride;
- unsigned slice_stride;
- void *data;
+ struct pipe_box box; /**< region of the resource to access */
+ unsigned stride; /**< row stride in bytes */
+ unsigned layer_stride; /**< image/layer stride in bytes */
};
struct pipe_vertex_buffer
{
unsigned stride; /**< stride to same attrib in next vertex, in bytes */
- unsigned max_index; /**< number of vertices in this buffer */
unsigned buffer_offset; /**< offset to start of data in buffer, in bytes */
struct pipe_resource *buffer; /**< the actual buffer */
+ const void *user_buffer; /**< pointer to a user buffer if buffer == NULL */
+};
+
+
+/**
+ * A constant buffer. A subrange of an existing buffer can be set
+ * as a constant buffer.
+ */
+struct pipe_constant_buffer {
+ struct pipe_resource *buffer; /**< the actual buffer */
+ unsigned buffer_offset; /**< offset to start of data in buffer, in bytes */
+ unsigned buffer_size; /**< how much data can be read in shader */
+ const void *user_buffer; /**< pointer to a user buffer if buffer == NULL */
+};
+
+
+/**
+ * A stream output target. The structure specifies the range vertices can
+ * be written to.
+ *
+ * In addition to that, the structure should internally maintain the offset
+ * into the buffer, which should be incremented everytime something is written
+ * (appended) to it. The internal offset is buffer_offset + how many bytes
+ * have been written. The internal offset can be stored on the device
+ * and the CPU actually doesn't have to query it.
+ *
+ * Use PIPE_QUERY_SO_STATISTICS to know how many primitives have
+ * actually been written.
+ */
+struct pipe_stream_output_target
+{
+ struct pipe_reference reference;
+ struct pipe_resource *buffer; /**< the output buffer */
+ struct pipe_context *context; /**< context this SO target belongs to */
+
+ unsigned buffer_offset; /**< offset where data should be written, in bytes */
+ unsigned buffer_size; /**< how much data is allowed to be written */
};
unsigned index_size; /**< size of an index, in bytes */
unsigned offset; /**< offset to start of data in buffer, in bytes */
struct pipe_resource *buffer; /**< the actual buffer */
+ const void *user_buffer; /**< pointer to a user buffer if buffer == NULL */
};
int index_bias; /**< a bias to be added to each index */
unsigned min_index; /**< the min index */
unsigned max_index; /**< the max index */
+
+ /**
+ * Primitive restart enable/index (only applies to indexed drawing)
+ */
+ boolean primitive_restart;
+ unsigned restart_index;
+
+ /**
+ * Stream output target. If not NULL, it's used to provide the 'count'
+ * parameter based on the number vertices captured by the stream output
+ * stage. (or generally, based on the number of bytes captured)
+ *
+ * Only 'mode', 'start_instance', and 'instance_count' are taken into
+ * account, all the other variables from pipe_draw_info are ignored.
+ *
+ * 'start' is implicitly 0 and 'count' is set as discussed above.
+ * The draw command is non-indexed.
+ *
+ * Note that this only provides the count. The vertex buffers must
+ * be set via set_vertex_buffers manually.
+ */
+ struct pipe_stream_output_target *count_from_stream_output;
+};
+
+
+/**
+ * Information to describe a blit call.
+ */
+struct pipe_blit_info
+{
+ struct {
+ struct pipe_resource *resource;
+ unsigned level;
+ struct pipe_box box; /**< negative width, height only legal for src */
+ /* For pipe_surface-like format casting: */
+ enum pipe_format format; /**< must be supported for sampling (src)
+ or rendering (dst), ZS is always supported */
+ } dst, src;
+
+ unsigned mask; /**< bitmask of PIPE_MASK_R/G/B/A/Z/S */
+ unsigned filter; /**< PIPE_TEX_FILTER_* */
+
+ boolean scissor_enable;
+ struct pipe_scissor_state scissor;
};
+/**
+ * Structure used as a header for serialized LLVM programs.
+ */
+struct pipe_llvm_program_header
+{
+ uint32_t num_bytes; /**< Number of bytes in the LLVM bytecode program. */
+};
+
+struct pipe_compute_state
+{
+ const void *prog; /**< Compute program to be executed. */
+ unsigned req_local_mem; /**< Required size of the LOCAL resource. */
+ unsigned req_private_mem; /**< Required size of the PRIVATE resource. */
+ unsigned req_input_mem; /**< Required size of the INPUT resource. */
+};
+
#ifdef __cplusplus
}
#endif
projects / mesa.git / blobdiff