/*
-** License Applicability. Except to the extent portions of this file are
-** made subject to an alternative license as permitted in the SGI Free
-** Software License B, Version 1.1 (the "License"), the contents of this
-** file are subject only to the provisions of the License. You may not use
-** this file except in compliance with the License. You may obtain a copy
-** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
-** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
-**
-** http://oss.sgi.com/projects/FreeB
-**
-** Note that, as provided in the License, the Software is distributed on an
-** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
-** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
-** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
-** PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
-**
-** Original Code. The Original Code is: OpenGL Sample Implementation,
-** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
-** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
-** Copyright in any portions created by third parties is as indicated
-** elsewhere herein. All Rights Reserved.
-**
-** Additional Notice Provisions: The application programming interfaces
-** established by SGI in conjunction with the Original Code are The
-** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
-** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version
-** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X
-** Window System(R) (Version 1.3), released October 19, 1998. This software
-** was created using the OpenGL(R) version 1.2.1 Sample Implementation
-** published by SGI, but has not been independently verified as being
-** compliant with the OpenGL(R) version 1.2.1 Specification.
-**
-** $Date: 2001/03/17 00:25:41 $ $Revision: 1.1 $
-** $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libutil/glue.c,v 1.1 2001/03/17 00:25:41 brianp Exp $
-*/
+ * SGI FREE SOFTWARE LICENSE B (Version 2.0, Sept. 18, 2008)
+ * Copyright (C) 1991-2000 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice including the dates of first publication and
+ * either this permission notice or a reference to
+ * http://oss.sgi.com/projects/FreeB/
+ * shall be included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * SILICON GRAPHICS, INC. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+ * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Silicon Graphics, Inc.
+ * shall not be used in advertising or otherwise to promote the sale, use or
+ * other dealings in this Software without prior written authorization from
+ * Silicon Graphics, Inc.
+ */
#include <stdlib.h>
#include "gluint.h"
-static char *__gluNurbsErrors[] = {
- " ",
- "spline order un-supported",
- "too few knots",
- "valid knot range is empty",
- "decreasing knot sequence knot",
- "knot multiplicity greater than order of spline",
- "gluEndCurve() must follow gluBeginCurve()",
- "gluBeginCurve() must precede gluEndCurve()",
- "missing or extra geometric data",
- "can't draw piecewise linear trimming curves",
- "missing or extra domain data",
- "missing or extra domain data",
- "gluEndTrim() must precede gluEndSurface()",
- "gluBeginSurface() must precede gluEndSurface()",
- "curve of improper type passed as trim curve",
- "gluBeginSurface() must precede gluBeginTrim()",
- "gluEndTrim() must follow gluBeginTrim()",
- "gluBeginTrim() must precede gluEndTrim()",
- "invalid or missing trim curve",
- "gluBeginTrim() must precede gluPwlCurve()",
- "piecewise linear trimming curve referenced twice",
- "piecewise linear trimming curve and nurbs curve mixed",
- "improper usage of trim data type",
- "nurbs curve referenced twice",
- "nurbs curve and piecewise linear trimming curve mixed",
- "nurbs surface referenced twice",
- "invalid property",
- "gluEndSurface() must follow gluBeginSurface()",
- "intersecting or misoriented trim curves",
- "intersecting trim curves",
- "UNUSED",
- "unconnected trim curves",
- "unknown knot error",
- "negative vertex count encountered",
- "negative byte-stride encounteed",
- "unknown type descriptor",
- "null control point reference",
- "duplicate point on piecewise linear trimming curve",
+static unsigned char *__gluNurbsErrors[] = {
+ (unsigned char*) " ",
+ (unsigned char*) "spline order un-supported",
+ (unsigned char*) "too few knots",
+ (unsigned char*) "valid knot range is empty",
+ (unsigned char*) "decreasing knot sequence knot",
+ (unsigned char*) "knot multiplicity greater than order of spline",
+ (unsigned char*) "gluEndCurve() must follow gluBeginCurve()",
+ (unsigned char*) "gluBeginCurve() must precede gluEndCurve()",
+ (unsigned char*) "missing or extra geometric data",
+ (unsigned char*) "can't draw piecewise linear trimming curves",
+ (unsigned char*) "missing or extra domain data",
+ (unsigned char*) "missing or extra domain data",
+ (unsigned char*) "gluEndTrim() must precede gluEndSurface()",
+ (unsigned char*) "gluBeginSurface() must precede gluEndSurface()",
+ (unsigned char*) "curve of improper type passed as trim curve",
+ (unsigned char*) "gluBeginSurface() must precede gluBeginTrim()",
+ (unsigned char*) "gluEndTrim() must follow gluBeginTrim()",
+ (unsigned char*) "gluBeginTrim() must precede gluEndTrim()",
+ (unsigned char*) "invalid or missing trim curve",
+ (unsigned char*) "gluBeginTrim() must precede gluPwlCurve()",
+ (unsigned char*) "piecewise linear trimming curve referenced twice",
+ (unsigned char*) "piecewise linear trimming curve and nurbs curve mixed",
+ (unsigned char*) "improper usage of trim data type",
+ (unsigned char*) "nurbs curve referenced twice",
+ (unsigned char*) "nurbs curve and piecewise linear trimming curve mixed",
+ (unsigned char*) "nurbs surface referenced twice",
+ (unsigned char*) "invalid property",
+ (unsigned char*) "gluEndSurface() must follow gluBeginSurface()",
+ (unsigned char*) "intersecting or misoriented trim curves",
+ (unsigned char*) "intersecting trim curves",
+ (unsigned char*) "UNUSED",
+ (unsigned char*) "unconnected trim curves",
+ (unsigned char*) "unknown knot error",
+ (unsigned char*) "negative vertex count encountered",
+ (unsigned char*) "negative byte-stride encounteed",
+ (unsigned char*) "unknown type descriptor",
+ (unsigned char*) "null control point reference",
+ (unsigned char*) "duplicate point on piecewise linear trimming curve",
};
-const char *__gluNURBSErrorString( int errno )
+const unsigned char *__gluNURBSErrorString( int errnum )
{
- return __gluNurbsErrors[errno];
+ return __gluNurbsErrors[errnum];
}
-static char *__gluTessErrors[] = {
- " ",
- "gluTessBeginPolygon() must precede a gluTessEndPolygon()",
- "gluTessBeginContour() must precede a gluTessEndContour()",
- "gluTessEndPolygon() must follow a gluTessBeginPolygon()",
- "gluTessEndContour() must follow a gluTessBeginContour()",
- "a coordinate is too large",
- "need combine callback",
+static unsigned char *__gluTessErrors[] = {
+ (unsigned char*) " ",
+ (unsigned char*) "gluTessBeginPolygon() must precede a gluTessEndPolygon()",
+ (unsigned char*) "gluTessBeginContour() must precede a gluTessEndContour()",
+ (unsigned char*) "gluTessEndPolygon() must follow a gluTessBeginPolygon()",
+ (unsigned char*) "gluTessEndContour() must follow a gluTessBeginContour()",
+ (unsigned char*) "a coordinate is too large",
+ (unsigned char*) "need combine callback",
};
-const char *__gluTessErrorString( int errno )
+const unsigned char *__gluTessErrorString( int errnum )
{
- return __gluTessErrors[errno];
+ return __gluTessErrors[errnum];
} /* __glTessErrorString() */
projects / mesa.git / blobdiff