#include "common/gen_gem.h"
#include "gen_perf.h"
+#include "gen_perf_regs.h"
#include "perf/gen_perf_mdapi.h"
#include "perf/gen_perf_metrics.h"
#include "dev/gen_debug.h"
#include "dev/gen_device_info.h"
#include "util/bitscan.h"
+#include "util/mesa-sha1.h"
+#include "util/u_math.h"
#define FILE_DEBUG_FLAG DEBUG_PERFMON
+#define MI_RPC_BO_SIZE 4096
+#define MI_FREQ_START_OFFSET_BYTES (3072)
+#define MI_RPC_BO_END_OFFSET_BYTES (MI_RPC_BO_SIZE / 2)
+#define MI_FREQ_END_OFFSET_BYTES (3076)
+
+#define INTEL_MASK(high, low) (((1u<<((high)-(low)+1))-1)<<(low))
+
+#define GEN7_RPSTAT1 0xA01C
+#define GEN7_RPSTAT1_CURR_GT_FREQ_SHIFT 7
+#define GEN7_RPSTAT1_CURR_GT_FREQ_MASK INTEL_MASK(13, 7)
+#define GEN7_RPSTAT1_PREV_GT_FREQ_SHIFT 0
+#define GEN7_RPSTAT1_PREV_GT_FREQ_MASK INTEL_MASK(6, 0)
+
+#define GEN9_RPSTAT0 0xA01C
+#define GEN9_RPSTAT0_CURR_GT_FREQ_SHIFT 23
+#define GEN9_RPSTAT0_CURR_GT_FREQ_MASK INTEL_MASK(31, 23)
+#define GEN9_RPSTAT0_PREV_GT_FREQ_SHIFT 0
+#define GEN9_RPSTAT0_PREV_GT_FREQ_MASK INTEL_MASK(8, 0)
+
+#define GEN6_SO_PRIM_STORAGE_NEEDED 0x2280
+#define GEN7_SO_PRIM_STORAGE_NEEDED(n) (0x5240 + (n) * 8)
+#define GEN6_SO_NUM_PRIMS_WRITTEN 0x2288
+#define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8)
+
+#define MAP_READ (1 << 0)
+#define MAP_WRITE (1 << 1)
+
+#define OA_REPORT_INVALID_CTX_ID (0xffffffff)
+
+/**
+ * Periodic OA samples are read() into these buffer structures via the
+ * i915 perf kernel interface and appended to the
+ * perf_ctx->sample_buffers linked list. When we process the
+ * results of an OA metrics query we need to consider all the periodic
+ * samples between the Begin and End MI_REPORT_PERF_COUNT command
+ * markers.
+ *
+ * 'Periodic' is a simplification as there are other automatic reports
+ * written by the hardware also buffered here.
+ *
+ * Considering three queries, A, B and C:
+ *
+ * Time ---->
+ * ________________A_________________
+ * | |
+ * | ________B_________ _____C___________
+ * | | | | | |
+ *
+ * And an illustration of sample buffers read over this time frame:
+ * [HEAD ][ ][ ][ ][ ][ ][ ][ ][TAIL ]
+ *
+ * These nodes may hold samples for query A:
+ * [ ][ ][ A ][ A ][ A ][ A ][ A ][ ][ ]
+ *
+ * These nodes may hold samples for query B:
+ * [ ][ ][ B ][ B ][ B ][ ][ ][ ][ ]
+ *
+ * These nodes may hold samples for query C:
+ * [ ][ ][ ][ ][ ][ C ][ C ][ C ][ ]
+ *
+ * The illustration assumes we have an even distribution of periodic
+ * samples so all nodes have the same size plotted against time:
+ *
+ * Note, to simplify code, the list is never empty.
+ *
+ * With overlapping queries we can see that periodic OA reports may
+ * relate to multiple queries and care needs to be take to keep
+ * track of sample buffers until there are no queries that might
+ * depend on their contents.
+ *
+ * We use a node ref counting system where a reference ensures that a
+ * node and all following nodes can't be freed/recycled until the
+ * reference drops to zero.
+ *
+ * E.g. with a ref of one here:
+ * [ 0 ][ 0 ][ 1 ][ 0 ][ 0 ][ 0 ][ 0 ][ 0 ][ 0 ]
+ *
+ * These nodes could be freed or recycled ("reaped"):
+ * [ 0 ][ 0 ]
+ *
+ * These must be preserved until the leading ref drops to zero:
+ * [ 1 ][ 0 ][ 0 ][ 0 ][ 0 ][ 0 ][ 0 ]
+ *
+ * When a query starts we take a reference on the current tail of
+ * the list, knowing that no already-buffered samples can possibly
+ * relate to the newly-started query. A pointer to this node is
+ * also saved in the query object's ->oa.samples_head.
+ *
+ * E.g. starting query A while there are two nodes in .sample_buffers:
+ * ________________A________
+ * |
+ *
+ * [ 0 ][ 1 ]
+ * ^_______ Add a reference and store pointer to node in
+ * A->oa.samples_head
+ *
+ * Moving forward to when the B query starts with no new buffer nodes:
+ * (for reference, i915 perf reads() are only done when queries finish)
+ * ________________A_______
+ * | ________B___
+ * | |
+ *
+ * [ 0 ][ 2 ]
+ * ^_______ Add a reference and store pointer to
+ * node in B->oa.samples_head
+ *
+ * Once a query is finished, after an OA query has become 'Ready',
+ * once the End OA report has landed and after we we have processed
+ * all the intermediate periodic samples then we drop the
+ * ->oa.samples_head reference we took at the start.
+ *
+ * So when the B query has finished we have:
+ * ________________A________
+ * | ______B___________
+ * | | |
+ * [ 0 ][ 1 ][ 0 ][ 0 ][ 0 ]
+ * ^_______ Drop B->oa.samples_head reference
+ *
+ * We still can't free these due to the A->oa.samples_head ref:
+ * [ 1 ][ 0 ][ 0 ][ 0 ]
+ *
+ * When the A query finishes: (note there's a new ref for C's samples_head)
+ * ________________A_________________
+ * | |
+ * | _____C_________
+ * | | |
+ * [ 0 ][ 0 ][ 0 ][ 0 ][ 1 ][ 0 ][ 0 ]
+ * ^_______ Drop A->oa.samples_head reference
+ *
+ * And we can now reap these nodes up to the C->oa.samples_head:
+ * [ X ][ X ][ X ][ X ]
+ * keeping -> [ 1 ][ 0 ][ 0 ]
+ *
+ * We reap old sample buffers each time we finish processing an OA
+ * query by iterating the sample_buffers list from the head until we
+ * find a referenced node and stop.
+ *
+ * Reaped buffers move to a perfquery.free_sample_buffers list and
+ * when we come to read() we first look to recycle a buffer from the
+ * free_sample_buffers list before allocating a new buffer.
+ */
+struct oa_sample_buf {
+ struct exec_node link;
+ int refcount;
+ int len;
+ uint8_t buf[I915_PERF_OA_SAMPLE_SIZE * 10];
+ uint32_t last_timestamp;
+};
+
+/**
+ * gen representation of a performance query object.
+ *
+ * NB: We want to keep this structure relatively lean considering that
+ * applications may expect to allocate enough objects to be able to
+ * query around all draw calls in a frame.
+ */
+struct gen_perf_query_object
+{
+ const struct gen_perf_query_info *queryinfo;
+
+ /* See query->kind to know which state below is in use... */
+ union {
+ struct {
+
+ /**
+ * BO containing OA counter snapshots at query Begin/End time.
+ */
+ void *bo;
+
+ /**
+ * Address of mapped of @bo
+ */
+ void *map;
+
+ /**
+ * The MI_REPORT_PERF_COUNT command lets us specify a unique
+ * ID that will be reflected in the resulting OA report
+ * that's written by the GPU. This is the ID we're expecting
+ * in the begin report and the the end report should be
+ * @begin_report_id + 1.
+ */
+ int begin_report_id;
+
+ /**
+ * Reference the head of the brw->perfquery.sample_buffers
+ * list at the time that the query started (so we only need
+ * to look at nodes after this point when looking for samples
+ * related to this query)
+ *
+ * (See struct brw_oa_sample_buf description for more details)
+ */
+ struct exec_node *samples_head;
+
+ /**
+ * false while in the unaccumulated_elements list, and set to
+ * true when the final, end MI_RPC snapshot has been
+ * accumulated.
+ */
+ bool results_accumulated;
+
+ /**
+ * Frequency of the GT at begin and end of the query.
+ */
+ uint64_t gt_frequency[2];
+
+ /**
+ * Accumulated OA results between begin and end of the query.
+ */
+ struct gen_perf_query_result result;
+ } oa;
+
+ struct {
+ /**
+ * BO containing starting and ending snapshots for the
+ * statistics counters.
+ */
+ void *bo;
+ } pipeline_stats;
+ };
+};
+
+struct gen_perf_context {
+ struct gen_perf_config *perf;
+
+ void * ctx; /* driver context (eg, brw_context) */
+ void * bufmgr;
+ const struct gen_device_info *devinfo;
+
+ uint32_t hw_ctx;
+ int drm_fd;
+
+ /* The i915 perf stream we open to setup + enable the OA counters */
+ int oa_stream_fd;
+
+ /* An i915 perf stream fd gives exclusive access to the OA unit that will
+ * report counter snapshots for a specific counter set/profile in a
+ * specific layout/format so we can only start OA queries that are
+ * compatible with the currently open fd...
+ */
+ int current_oa_metrics_set_id;
+ int current_oa_format;
+
+ /* List of buffers containing OA reports */
+ struct exec_list sample_buffers;
+
+ /* Cached list of empty sample buffers */
+ struct exec_list free_sample_buffers;
+
+ int n_active_oa_queries;
+ int n_active_pipeline_stats_queries;
+
+ /* The number of queries depending on running OA counters which
+ * extends beyond brw_end_perf_query() since we need to wait until
+ * the last MI_RPC command has parsed by the GPU.
+ *
+ * Accurate accounting is important here as emitting an
+ * MI_REPORT_PERF_COUNT command while the OA unit is disabled will
+ * effectively hang the gpu.
+ */
+ int n_oa_users;
+
+ /* To help catch an spurious problem with the hardware or perf
+ * forwarding samples, we emit each MI_REPORT_PERF_COUNT command
+ * with a unique ID that we can explicitly check for...
+ */
+ int next_query_start_report_id;
+
+ /**
+ * An array of queries whose results haven't yet been assembled
+ * based on the data in buffer objects.
+ *
+ * These may be active, or have already ended. However, the
+ * results have not been requested.
+ */
+ struct gen_perf_query_object **unaccumulated;
+ int unaccumulated_elements;
+ int unaccumulated_array_size;
+
+ /* The total number of query objects so we can relinquish
+ * our exclusive access to perf if the application deletes
+ * all of its objects. (NB: We only disable perf while
+ * there are no active queries)
+ */
+ int n_query_instances;
+};
+
+const struct gen_perf_query_info*
+gen_perf_query_info(const struct gen_perf_query_object *query)
+{
+ return query->queryinfo;
+}
+
+struct gen_perf_context *
+gen_perf_new_context(void *parent)
+{
+ struct gen_perf_context *ctx = rzalloc(parent, struct gen_perf_context);
+ if (! ctx)
+ fprintf(stderr, "%s: failed to alloc context\n", __func__);
+ return ctx;
+}
+
+struct gen_perf_config *
+gen_perf_config(struct gen_perf_context *ctx)
+{
+ return ctx->perf;
+}
+
+struct gen_perf_query_object *
+gen_perf_new_query(struct gen_perf_context *perf_ctx, unsigned query_index)
+{
+ const struct gen_perf_query_info *query =
+ &perf_ctx->perf->queries[query_index];
+ struct gen_perf_query_object *obj =
+ calloc(1, sizeof(struct gen_perf_query_object));
+
+ if (!obj)
+ return NULL;
+
+ obj->queryinfo = query;
+
+ perf_ctx->n_query_instances++;
+ return obj;
+}
+
+int
+gen_perf_active_queries(struct gen_perf_context *perf_ctx,
+ const struct gen_perf_query_info *query)
+{
+ assert(perf_ctx->n_active_oa_queries == 0 || perf_ctx->n_active_pipeline_stats_queries == 0);
+
+ switch (query->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ return perf_ctx->n_active_oa_queries;
+ break;
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ return perf_ctx->n_active_pipeline_stats_queries;
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+}
+
+static inline uint64_t to_user_pointer(void *ptr)
+{
+ return (uintptr_t) ptr;
+}
static bool
get_sysfs_dev_dir(struct gen_perf_config *perf, int fd)
return read_file_uint64(buf, value);
}
+static inline struct gen_perf_query_info *
+append_query_info(struct gen_perf_config *perf, int max_counters)
+{
+ struct gen_perf_query_info *query;
+
+ perf->queries = reralloc(perf, perf->queries,
+ struct gen_perf_query_info,
+ ++perf->n_queries);
+ query = &perf->queries[perf->n_queries - 1];
+ memset(query, 0, sizeof(*query));
+
+ if (max_counters > 0) {
+ query->max_counters = max_counters;
+ query->counters =
+ rzalloc_array(perf, struct gen_perf_query_counter, max_counters);
+ }
+
+ return query;
+}
+
static void
register_oa_config(struct gen_perf_config *perf,
const struct gen_perf_query_info *query,
uint64_t config_id)
{
- struct gen_perf_query_info *registred_query =
- gen_perf_query_append_query_info(perf, 0);
+ struct gen_perf_query_info *registered_query = append_query_info(perf, 0);
- *registred_query = *query;
- registred_query->oa_metrics_set_id = config_id;
- DBG("metric set registred: id = %" PRIu64", guid = %s\n",
- registred_query->oa_metrics_set_id, query->guid);
+ *registered_query = *query;
+ registered_query->oa_metrics_set_id = config_id;
+ DBG("metric set registered: id = %" PRIu64", guid = %s\n",
+ registered_query->oa_metrics_set_id, query->guid);
}
static void
metric_entry->d_name);
if (entry) {
uint64_t id;
-
- len = snprintf(buf, sizeof(buf), "%s/metrics/%s/id",
- perf->sysfs_dev_dir, metric_entry->d_name);
- if (len < 0 || len >= sizeof(buf)) {
- DBG("Failed to concatenate path to sysfs metric id file\n");
- continue;
- }
-
- if (!read_file_uint64(buf, &id)) {
+ if (!gen_perf_load_metric_id(perf, metric_entry->d_name, &id)) {
DBG("Failed to read metric set id from %s: %m", buf);
continue;
}
&invalid_config_id) < 0 && errno == ENOENT;
}
+static int
+i915_query_items(struct gen_perf_config *perf, int fd,
+ struct drm_i915_query_item *items, uint32_t n_items)
+{
+ struct drm_i915_query q = {
+ .num_items = n_items,
+ .items_ptr = to_user_pointer(items),
+ };
+ return gen_ioctl(fd, DRM_IOCTL_I915_QUERY, &q);
+}
+
+static bool
+i915_query_perf_config_supported(struct gen_perf_config *perf, int fd)
+{
+ struct drm_i915_query_item item = {
+ .query_id = DRM_I915_QUERY_PERF_CONFIG,
+ .flags = DRM_I915_QUERY_PERF_CONFIG_LIST,
+ };
+
+ return i915_query_items(perf, fd, &item, 1) == 0 && item.length > 0;
+}
+
+static bool
+i915_query_perf_config_data(struct gen_perf_config *perf,
+ int fd, const char *guid,
+ struct drm_i915_perf_oa_config *config)
+{
+ struct {
+ struct drm_i915_query_perf_config query;
+ struct drm_i915_perf_oa_config config;
+ } item_data;
+ struct drm_i915_query_item item = {
+ .query_id = DRM_I915_QUERY_PERF_CONFIG,
+ .flags = DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID,
+ .data_ptr = to_user_pointer(&item_data),
+ .length = sizeof(item_data),
+ };
+
+ memset(&item_data, 0, sizeof(item_data));
+ memcpy(item_data.query.uuid, guid, sizeof(item_data.query.uuid));
+ memcpy(&item_data.config, config, sizeof(item_data.config));
+
+ if (!(i915_query_items(perf, fd, &item, 1) == 0 && item.length > 0))
+ return false;
+
+ memcpy(config, &item_data.config, sizeof(item_data.config));
+
+ return true;
+}
+
bool
-gen_perf_load_metric_id(struct gen_perf_config *perf, const char *guid,
+gen_perf_load_metric_id(struct gen_perf_config *perf_cfg,
+ const char *guid,
uint64_t *metric_id)
{
char config_path[280];
snprintf(config_path, sizeof(config_path), "%s/metrics/%s/id",
- perf->sysfs_dev_dir, guid);
+ perf_cfg->sysfs_dev_dir, guid);
/* Don't recreate already loaded configs. */
return read_file_uint64(config_path, metric_id);
}
+static uint64_t
+i915_add_config(struct gen_perf_config *perf, int fd,
+ const struct gen_perf_registers *config,
+ const char *guid)
+{
+ struct drm_i915_perf_oa_config i915_config = { 0, };
+
+ memcpy(i915_config.uuid, guid, sizeof(i915_config.uuid));
+
+ i915_config.n_mux_regs = config->n_mux_regs;
+ i915_config.mux_regs_ptr = to_user_pointer(config->mux_regs);
+
+ i915_config.n_boolean_regs = config->n_b_counter_regs;
+ i915_config.boolean_regs_ptr = to_user_pointer(config->b_counter_regs);
+
+ i915_config.n_flex_regs = config->n_flex_regs;
+ i915_config.flex_regs_ptr = to_user_pointer(config->flex_regs);
+
+ int ret = gen_ioctl(fd, DRM_IOCTL_I915_PERF_ADD_CONFIG, &i915_config);
+ return ret > 0 ? ret : 0;
+}
+
static void
init_oa_configs(struct gen_perf_config *perf, int fd)
{
hash_table_foreach(perf->oa_metrics_table, entry) {
const struct gen_perf_query_info *query = entry->data;
- struct drm_i915_perf_oa_config config;
uint64_t config_id;
- int ret;
if (gen_perf_load_metric_id(perf, query->guid, &config_id)) {
DBG("metric set: %s (already loaded)\n", query->guid);
continue;
}
- memset(&config, 0, sizeof(config));
-
- memcpy(config.uuid, query->guid, sizeof(config.uuid));
-
- config.n_mux_regs = query->n_mux_regs;
- config.mux_regs_ptr = (uintptr_t) query->mux_regs;
-
- config.n_boolean_regs = query->n_b_counter_regs;
- config.boolean_regs_ptr = (uintptr_t) query->b_counter_regs;
-
- config.n_flex_regs = query->n_flex_regs;
- config.flex_regs_ptr = (uintptr_t) query->flex_regs;
-
- ret = gen_ioctl(fd, DRM_IOCTL_I915_PERF_ADD_CONFIG, &config);
+ int ret = i915_add_config(perf, fd, &query->config, query->guid);
if (ret < 0) {
DBG("Failed to load \"%s\" (%s) metrics set in kernel: %s\n",
query->name, query->guid, strerror(errno));
}
if (devinfo->is_cannonlake)
return gen_oa_register_queries_cnl;
- if (devinfo->gen == 11)
+ if (devinfo->gen == 11) {
+ if (devinfo->is_elkhartlake)
+ return gen_oa_register_queries_lkf;
return gen_oa_register_queries_icl;
+ }
+ if (devinfo->gen == 12)
+ return gen_oa_register_queries_tgl;
return NULL;
}
-bool
-gen_perf_load_oa_metrics(struct gen_perf_config *perf, int fd,
+static inline void
+add_stat_reg(struct gen_perf_query_info *query, uint32_t reg,
+ uint32_t numerator, uint32_t denominator,
+ const char *name, const char *description)
+{
+ struct gen_perf_query_counter *counter;
+
+ assert(query->n_counters < query->max_counters);
+
+ counter = &query->counters[query->n_counters];
+ counter->name = name;
+ counter->desc = description;
+ counter->type = GEN_PERF_COUNTER_TYPE_RAW;
+ counter->data_type = GEN_PERF_COUNTER_DATA_TYPE_UINT64;
+ counter->offset = sizeof(uint64_t) * query->n_counters;
+ counter->pipeline_stat.reg = reg;
+ counter->pipeline_stat.numerator = numerator;
+ counter->pipeline_stat.denominator = denominator;
+
+ query->n_counters++;
+}
+
+static inline void
+add_basic_stat_reg(struct gen_perf_query_info *query,
+ uint32_t reg, const char *name)
+{
+ add_stat_reg(query, reg, 1, 1, name, name);
+}
+
+static void
+load_pipeline_statistic_metrics(struct gen_perf_config *perf_cfg,
+ const struct gen_device_info *devinfo)
+{
+ struct gen_perf_query_info *query =
+ append_query_info(perf_cfg, MAX_STAT_COUNTERS);
+
+ query->kind = GEN_PERF_QUERY_TYPE_PIPELINE;
+ query->name = "Pipeline Statistics Registers";
+
+ add_basic_stat_reg(query, IA_VERTICES_COUNT,
+ "N vertices submitted");
+ add_basic_stat_reg(query, IA_PRIMITIVES_COUNT,
+ "N primitives submitted");
+ add_basic_stat_reg(query, VS_INVOCATION_COUNT,
+ "N vertex shader invocations");
+
+ if (devinfo->gen == 6) {
+ add_stat_reg(query, GEN6_SO_PRIM_STORAGE_NEEDED, 1, 1,
+ "SO_PRIM_STORAGE_NEEDED",
+ "N geometry shader stream-out primitives (total)");
+ add_stat_reg(query, GEN6_SO_NUM_PRIMS_WRITTEN, 1, 1,
+ "SO_NUM_PRIMS_WRITTEN",
+ "N geometry shader stream-out primitives (written)");
+ } else {
+ add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(0), 1, 1,
+ "SO_PRIM_STORAGE_NEEDED (Stream 0)",
+ "N stream-out (stream 0) primitives (total)");
+ add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(1), 1, 1,
+ "SO_PRIM_STORAGE_NEEDED (Stream 1)",
+ "N stream-out (stream 1) primitives (total)");
+ add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(2), 1, 1,
+ "SO_PRIM_STORAGE_NEEDED (Stream 2)",
+ "N stream-out (stream 2) primitives (total)");
+ add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(3), 1, 1,
+ "SO_PRIM_STORAGE_NEEDED (Stream 3)",
+ "N stream-out (stream 3) primitives (total)");
+ add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(0), 1, 1,
+ "SO_NUM_PRIMS_WRITTEN (Stream 0)",
+ "N stream-out (stream 0) primitives (written)");
+ add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(1), 1, 1,
+ "SO_NUM_PRIMS_WRITTEN (Stream 1)",
+ "N stream-out (stream 1) primitives (written)");
+ add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(2), 1, 1,
+ "SO_NUM_PRIMS_WRITTEN (Stream 2)",
+ "N stream-out (stream 2) primitives (written)");
+ add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(3), 1, 1,
+ "SO_NUM_PRIMS_WRITTEN (Stream 3)",
+ "N stream-out (stream 3) primitives (written)");
+ }
+
+ add_basic_stat_reg(query, HS_INVOCATION_COUNT,
+ "N TCS shader invocations");
+ add_basic_stat_reg(query, DS_INVOCATION_COUNT,
+ "N TES shader invocations");
+
+ add_basic_stat_reg(query, GS_INVOCATION_COUNT,
+ "N geometry shader invocations");
+ add_basic_stat_reg(query, GS_PRIMITIVES_COUNT,
+ "N geometry shader primitives emitted");
+
+ add_basic_stat_reg(query, CL_INVOCATION_COUNT,
+ "N primitives entering clipping");
+ add_basic_stat_reg(query, CL_PRIMITIVES_COUNT,
+ "N primitives leaving clipping");
+
+ if (devinfo->is_haswell || devinfo->gen == 8) {
+ add_stat_reg(query, PS_INVOCATION_COUNT, 1, 4,
+ "N fragment shader invocations",
+ "N fragment shader invocations");
+ } else {
+ add_basic_stat_reg(query, PS_INVOCATION_COUNT,
+ "N fragment shader invocations");
+ }
+
+ add_basic_stat_reg(query, PS_DEPTH_COUNT,
+ "N z-pass fragments");
+
+ if (devinfo->gen >= 7) {
+ add_basic_stat_reg(query, CS_INVOCATION_COUNT,
+ "N compute shader invocations");
+ }
+
+ query->data_size = sizeof(uint64_t) * query->n_counters;
+}
+
+static bool
+load_oa_metrics(struct gen_perf_config *perf, int fd,
const struct gen_device_info *devinfo)
{
perf_register_oa_queries_t oa_register = get_register_queries_function(devinfo);
bool i915_perf_oa_available = false;
struct stat sb;
+ perf->i915_query_supported = i915_query_perf_config_supported(perf, fd);
+
/* The existence of this sysctl parameter implies the kernel supports
* the i915 perf interface.
*/
return true;
}
+struct gen_perf_registers *
+gen_perf_load_configuration(struct gen_perf_config *perf_cfg, int fd, const char *guid)
+{
+ if (!perf_cfg->i915_query_supported)
+ return NULL;
+
+ struct drm_i915_perf_oa_config i915_config = { 0, };
+ if (!i915_query_perf_config_data(perf_cfg, fd, guid, &i915_config))
+ return NULL;
+
+ struct gen_perf_registers *config = rzalloc(NULL, struct gen_perf_registers);
+ config->n_flex_regs = i915_config.n_flex_regs;
+ config->flex_regs = rzalloc_array(config, struct gen_perf_query_register_prog, config->n_flex_regs);
+ config->n_mux_regs = i915_config.n_mux_regs;
+ config->mux_regs = rzalloc_array(config, struct gen_perf_query_register_prog, config->n_mux_regs);
+ config->n_b_counter_regs = i915_config.n_boolean_regs;
+ config->b_counter_regs = rzalloc_array(config, struct gen_perf_query_register_prog, config->n_b_counter_regs);
+
+ /*
+ * struct gen_perf_query_register_prog maps exactly to the tuple of
+ * (register offset, register value) returned by the i915.
+ */
+ i915_config.flex_regs_ptr = to_user_pointer(config->flex_regs);
+ i915_config.mux_regs_ptr = to_user_pointer(config->mux_regs);
+ i915_config.boolean_regs_ptr = to_user_pointer(config->b_counter_regs);
+ if (!i915_query_perf_config_data(perf_cfg, fd, guid, &i915_config)) {
+ ralloc_free(config);
+ return NULL;
+ }
+
+ return config;
+}
+
+uint64_t
+gen_perf_store_configuration(struct gen_perf_config *perf_cfg, int fd,
+ const struct gen_perf_registers *config,
+ const char *guid)
+{
+ if (guid)
+ return i915_add_config(perf_cfg, fd, config, guid);
+
+ struct mesa_sha1 sha1_ctx;
+ _mesa_sha1_init(&sha1_ctx);
+
+ if (config->flex_regs) {
+ _mesa_sha1_update(&sha1_ctx, config->flex_regs,
+ sizeof(config->flex_regs[0]) *
+ config->n_flex_regs);
+ }
+ if (config->mux_regs) {
+ _mesa_sha1_update(&sha1_ctx, config->mux_regs,
+ sizeof(config->mux_regs[0]) *
+ config->n_mux_regs);
+ }
+ if (config->b_counter_regs) {
+ _mesa_sha1_update(&sha1_ctx, config->b_counter_regs,
+ sizeof(config->b_counter_regs[0]) *
+ config->n_b_counter_regs);
+ }
+
+ uint8_t hash[20];
+ _mesa_sha1_final(&sha1_ctx, hash);
+
+ char formatted_hash[41];
+ _mesa_sha1_format(formatted_hash, hash);
+
+ char generated_guid[37];
+ snprintf(generated_guid, sizeof(generated_guid),
+ "%.8s-%.4s-%.4s-%.4s-%.12s",
+ &formatted_hash[0], &formatted_hash[8],
+ &formatted_hash[8 + 4], &formatted_hash[8 + 4 + 4],
+ &formatted_hash[8 + 4 + 4 + 4]);
+
+ /* Check if already present. */
+ uint64_t id;
+ if (gen_perf_load_metric_id(perf_cfg, generated_guid, &id))
+ return id;
+
+ return i915_add_config(perf_cfg, fd, config, generated_guid);
+}
+
/* Accumulate 32bits OA counters */
static inline void
accumulate_uint32(const uint32_t *report0,
{
int i, idx = 0;
- result->hw_id = start[2];
+ if (result->hw_id == OA_REPORT_INVALID_CTX_ID &&
+ start[2] != OA_REPORT_INVALID_CTX_ID)
+ result->hw_id = start[2];
result->reports_accumulated++;
switch (query->oa_format) {
gen_perf_query_result_clear(struct gen_perf_query_result *result)
{
memset(result, 0, sizeof(*result));
- result->hw_id = 0xffffffff; /* invalid */
+ result->hw_id = OA_REPORT_INVALID_CTX_ID; /* invalid */
+}
+
+static void
+register_mdapi_statistic_query(struct gen_perf_config *perf_cfg,
+ const struct gen_device_info *devinfo)
+{
+ if (!(devinfo->gen >= 7 && devinfo->gen <= 11))
+ return;
+
+ struct gen_perf_query_info *query =
+ append_query_info(perf_cfg, MAX_STAT_COUNTERS);
+
+ query->kind = GEN_PERF_QUERY_TYPE_PIPELINE;
+ query->name = "Intel_Raw_Pipeline_Statistics_Query";
+
+ /* The order has to match mdapi_pipeline_metrics. */
+ add_basic_stat_reg(query, IA_VERTICES_COUNT,
+ "N vertices submitted");
+ add_basic_stat_reg(query, IA_PRIMITIVES_COUNT,
+ "N primitives submitted");
+ add_basic_stat_reg(query, VS_INVOCATION_COUNT,
+ "N vertex shader invocations");
+ add_basic_stat_reg(query, GS_INVOCATION_COUNT,
+ "N geometry shader invocations");
+ add_basic_stat_reg(query, GS_PRIMITIVES_COUNT,
+ "N geometry shader primitives emitted");
+ add_basic_stat_reg(query, CL_INVOCATION_COUNT,
+ "N primitives entering clipping");
+ add_basic_stat_reg(query, CL_PRIMITIVES_COUNT,
+ "N primitives leaving clipping");
+ if (devinfo->is_haswell || devinfo->gen == 8) {
+ add_stat_reg(query, PS_INVOCATION_COUNT, 1, 4,
+ "N fragment shader invocations",
+ "N fragment shader invocations");
+ } else {
+ add_basic_stat_reg(query, PS_INVOCATION_COUNT,
+ "N fragment shader invocations");
+ }
+ add_basic_stat_reg(query, HS_INVOCATION_COUNT,
+ "N TCS shader invocations");
+ add_basic_stat_reg(query, DS_INVOCATION_COUNT,
+ "N TES shader invocations");
+ if (devinfo->gen >= 7) {
+ add_basic_stat_reg(query, CS_INVOCATION_COUNT,
+ "N compute shader invocations");
+ }
+
+ if (devinfo->gen >= 10) {
+ /* Reuse existing CS invocation register until we can expose this new
+ * one.
+ */
+ add_basic_stat_reg(query, CS_INVOCATION_COUNT,
+ "Reserved1");
+ }
+
+ query->data_size = sizeof(uint64_t) * query->n_counters;
}
static void
sizeof(struct_name.field_name[0]), \
GEN_PERF_COUNTER_DATA_TYPE_##type_name)
-void
-gen_perf_query_register_mdapi_oa_query(const struct gen_device_info *devinfo,
- struct gen_perf_config *perf)
+static void
+register_mdapi_oa_query(const struct gen_device_info *devinfo,
+ struct gen_perf_config *perf)
{
struct gen_perf_query_info *query = NULL;
switch (devinfo->gen) {
case 7: {
- query = gen_perf_query_append_query_info(perf, 1 + 45 + 16 + 7);
+ query = append_query_info(perf, 1 + 45 + 16 + 7);
query->oa_format = I915_OA_FORMAT_A45_B8_C8;
struct gen7_mdapi_metrics metric_data;
break;
}
case 8: {
- query = gen_perf_query_append_query_info(perf, 2 + 36 + 16 + 16);
+ query = append_query_info(perf, 2 + 36 + 16 + 16);
query->oa_format = I915_OA_FORMAT_A32u40_A4u32_B8_C8;
struct gen8_mdapi_metrics metric_data;
case 9:
case 10:
case 11: {
- query = gen_perf_query_append_query_info(perf, 2 + 36 + 16 + 16 + 16 + 2);
+ query = append_query_info(perf, 2 + 36 + 16 + 16 + 16 + 2);
query->oa_format = I915_OA_FORMAT_A32u40_A4u32_B8_C8;
struct gen9_mdapi_metrics metric_data;
}
}
-void
-gen_perf_query_register_mdapi_statistic_query(const struct gen_device_info *devinfo,
- struct gen_perf_config *perf)
-{
- if (!(devinfo->gen >= 7 && devinfo->gen <= 11))
- return;
-
- struct gen_perf_query_info *query =
- gen_perf_query_append_query_info(perf, MAX_STAT_COUNTERS);
-
- query->kind = GEN_PERF_QUERY_TYPE_PIPELINE;
- query->name = "Intel_Raw_Pipeline_Statistics_Query";
-
- /* The order has to match mdapi_pipeline_metrics. */
- gen_perf_query_info_add_basic_stat_reg(query, IA_VERTICES_COUNT,
- "N vertices submitted");
- gen_perf_query_info_add_basic_stat_reg(query, IA_PRIMITIVES_COUNT,
- "N primitives submitted");
- gen_perf_query_info_add_basic_stat_reg(query, VS_INVOCATION_COUNT,
- "N vertex shader invocations");
- gen_perf_query_info_add_basic_stat_reg(query, GS_INVOCATION_COUNT,
- "N geometry shader invocations");
- gen_perf_query_info_add_basic_stat_reg(query, GS_PRIMITIVES_COUNT,
- "N geometry shader primitives emitted");
- gen_perf_query_info_add_basic_stat_reg(query, CL_INVOCATION_COUNT,
- "N primitives entering clipping");
- gen_perf_query_info_add_basic_stat_reg(query, CL_PRIMITIVES_COUNT,
- "N primitives leaving clipping");
- if (devinfo->is_haswell || devinfo->gen == 8) {
- gen_perf_query_info_add_stat_reg(query, PS_INVOCATION_COUNT, 1, 4,
- "N fragment shader invocations",
- "N fragment shader invocations");
- } else {
- gen_perf_query_info_add_basic_stat_reg(query, PS_INVOCATION_COUNT,
- "N fragment shader invocations");
- }
- gen_perf_query_info_add_basic_stat_reg(query, HS_INVOCATION_COUNT,
- "N TCS shader invocations");
- gen_perf_query_info_add_basic_stat_reg(query, DS_INVOCATION_COUNT,
- "N TES shader invocations");
- if (devinfo->gen >= 7) {
- gen_perf_query_info_add_basic_stat_reg(query, CS_INVOCATION_COUNT,
- "N compute shader invocations");
- }
-
- if (devinfo->gen >= 10) {
- /* Reuse existing CS invocation register until we can expose this new
- * one.
- */
- gen_perf_query_info_add_basic_stat_reg(query, CS_INVOCATION_COUNT,
- "Reserved1");
- }
-
- query->data_size = sizeof(uint64_t) * query->n_counters;
-}
-
-uint64_t
-gen_perf_query_get_metric_id(struct gen_perf_config *perf,
- const struct gen_perf_query_info *query)
+static uint64_t
+get_metric_id(struct gen_perf_config *perf,
+ const struct gen_perf_query_info *query)
{
/* These queries are know not to ever change, their config ID has been
* loaded upon the first query creation. No need to look them up again.
return query->oa_metrics_set_id;
}
-struct oa_sample_buf *
-gen_perf_get_free_sample_buf(struct gen_perf_context *perf_ctx)
+static struct oa_sample_buf *
+get_free_sample_buf(struct gen_perf_context *perf_ctx)
{
struct exec_node *node = exec_list_pop_head(&perf_ctx->free_sample_buffers);
struct oa_sample_buf *buf;
return buf;
}
+
+static void
+reap_old_sample_buffers(struct gen_perf_context *perf_ctx)
+{
+ struct exec_node *tail_node =
+ exec_list_get_tail(&perf_ctx->sample_buffers);
+ struct oa_sample_buf *tail_buf =
+ exec_node_data(struct oa_sample_buf, tail_node, link);
+
+ /* Remove all old, unreferenced sample buffers walking forward from
+ * the head of the list, except always leave at least one node in
+ * the list so we always have a node to reference when we Begin
+ * a new query.
+ */
+ foreach_list_typed_safe(struct oa_sample_buf, buf, link,
+ &perf_ctx->sample_buffers)
+ {
+ if (buf->refcount == 0 && buf != tail_buf) {
+ exec_node_remove(&buf->link);
+ exec_list_push_head(&perf_ctx->free_sample_buffers, &buf->link);
+ } else
+ return;
+ }
+}
+
+static void
+free_sample_bufs(struct gen_perf_context *perf_ctx)
+{
+ foreach_list_typed_safe(struct oa_sample_buf, buf, link,
+ &perf_ctx->free_sample_buffers)
+ ralloc_free(buf);
+
+ exec_list_make_empty(&perf_ctx->free_sample_buffers);
+}
+
+/******************************************************************************/
+
+/**
+ * Emit MI_STORE_REGISTER_MEM commands to capture all of the
+ * pipeline statistics for the performance query object.
+ */
+static void
+snapshot_statistics_registers(void *context,
+ struct gen_perf_config *perf,
+ struct gen_perf_query_object *obj,
+ uint32_t offset_in_bytes)
+{
+ const struct gen_perf_query_info *query = obj->queryinfo;
+ const int n_counters = query->n_counters;
+
+ for (int i = 0; i < n_counters; i++) {
+ const struct gen_perf_query_counter *counter = &query->counters[i];
+
+ assert(counter->data_type == GEN_PERF_COUNTER_DATA_TYPE_UINT64);
+
+ perf->vtbl.store_register_mem64(context, obj->pipeline_stats.bo,
+ counter->pipeline_stat.reg,
+ offset_in_bytes + i * sizeof(uint64_t));
+ }
+}
+
+static void
+gen_perf_close(struct gen_perf_context *perfquery,
+ const struct gen_perf_query_info *query)
+{
+ if (perfquery->oa_stream_fd != -1) {
+ close(perfquery->oa_stream_fd);
+ perfquery->oa_stream_fd = -1;
+ }
+ if (query->kind == GEN_PERF_QUERY_TYPE_RAW) {
+ struct gen_perf_query_info *raw_query =
+ (struct gen_perf_query_info *) query;
+ raw_query->oa_metrics_set_id = 0;
+ }
+}
+
+static bool
+gen_perf_open(struct gen_perf_context *perf_ctx,
+ int metrics_set_id,
+ int report_format,
+ int period_exponent,
+ int drm_fd,
+ uint32_t ctx_id)
+{
+ uint64_t properties[] = {
+ /* Single context sampling */
+ DRM_I915_PERF_PROP_CTX_HANDLE, ctx_id,
+
+ /* Include OA reports in samples */
+ DRM_I915_PERF_PROP_SAMPLE_OA, true,
+
+ /* OA unit configuration */
+ DRM_I915_PERF_PROP_OA_METRICS_SET, metrics_set_id,
+ DRM_I915_PERF_PROP_OA_FORMAT, report_format,
+ DRM_I915_PERF_PROP_OA_EXPONENT, period_exponent,
+ };
+ struct drm_i915_perf_open_param param = {
+ .flags = I915_PERF_FLAG_FD_CLOEXEC |
+ I915_PERF_FLAG_FD_NONBLOCK |
+ I915_PERF_FLAG_DISABLED,
+ .num_properties = ARRAY_SIZE(properties) / 2,
+ .properties_ptr = (uintptr_t) properties,
+ };
+ int fd = gen_ioctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m);
+ if (fd == -1) {
+ DBG("Error opening gen perf OA stream: %m\n");
+ return false;
+ }
+
+ perf_ctx->oa_stream_fd = fd;
+
+ perf_ctx->current_oa_metrics_set_id = metrics_set_id;
+ perf_ctx->current_oa_format = report_format;
+
+ return true;
+}
+
+static bool
+inc_n_users(struct gen_perf_context *perf_ctx)
+{
+ if (perf_ctx->n_oa_users == 0 &&
+ gen_ioctl(perf_ctx->oa_stream_fd, I915_PERF_IOCTL_ENABLE, 0) < 0)
+ {
+ return false;
+ }
+ ++perf_ctx->n_oa_users;
+
+ return true;
+}
+
+static void
+dec_n_users(struct gen_perf_context *perf_ctx)
+{
+ /* Disabling the i915 perf stream will effectively disable the OA
+ * counters. Note it's important to be sure there are no outstanding
+ * MI_RPC commands at this point since they could stall the CS
+ * indefinitely once OACONTROL is disabled.
+ */
+ --perf_ctx->n_oa_users;
+ if (perf_ctx->n_oa_users == 0 &&
+ gen_ioctl(perf_ctx->oa_stream_fd, I915_PERF_IOCTL_DISABLE, 0) < 0)
+ {
+ DBG("WARNING: Error disabling gen perf stream: %m\n");
+ }
+}
+
+void
+gen_perf_init_metrics(struct gen_perf_config *perf_cfg,
+ const struct gen_device_info *devinfo,
+ int drm_fd)
+{
+ load_pipeline_statistic_metrics(perf_cfg, devinfo);
+ register_mdapi_statistic_query(perf_cfg, devinfo);
+ if (load_oa_metrics(perf_cfg, drm_fd, devinfo))
+ register_mdapi_oa_query(devinfo, perf_cfg);
+}
+
+void
+gen_perf_init_context(struct gen_perf_context *perf_ctx,
+ struct gen_perf_config *perf_cfg,
+ void * ctx, /* driver context (eg, brw_context) */
+ void * bufmgr, /* eg brw_bufmgr */
+ const struct gen_device_info *devinfo,
+ uint32_t hw_ctx,
+ int drm_fd)
+{
+ perf_ctx->perf = perf_cfg;
+ perf_ctx->ctx = ctx;
+ perf_ctx->bufmgr = bufmgr;
+ perf_ctx->drm_fd = drm_fd;
+ perf_ctx->hw_ctx = hw_ctx;
+ perf_ctx->devinfo = devinfo;
+
+ perf_ctx->unaccumulated =
+ ralloc_array(ctx, struct gen_perf_query_object *, 2);
+ perf_ctx->unaccumulated_elements = 0;
+ perf_ctx->unaccumulated_array_size = 2;
+
+ exec_list_make_empty(&perf_ctx->sample_buffers);
+ exec_list_make_empty(&perf_ctx->free_sample_buffers);
+
+ /* It's convenient to guarantee that this linked list of sample
+ * buffers is never empty so we add an empty head so when we
+ * Begin an OA query we can always take a reference on a buffer
+ * in this list.
+ */
+ struct oa_sample_buf *buf = get_free_sample_buf(perf_ctx);
+ exec_list_push_head(&perf_ctx->sample_buffers, &buf->link);
+
+ perf_ctx->oa_stream_fd = -1;
+ perf_ctx->next_query_start_report_id = 1000;
+}
+
+/**
+ * Add a query to the global list of "unaccumulated queries."
+ *
+ * Queries are tracked here until all the associated OA reports have
+ * been accumulated via accumulate_oa_reports() after the end
+ * MI_REPORT_PERF_COUNT has landed in query->oa.bo.
+ */
+static void
+add_to_unaccumulated_query_list(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *obj)
+{
+ if (perf_ctx->unaccumulated_elements >=
+ perf_ctx->unaccumulated_array_size)
+ {
+ perf_ctx->unaccumulated_array_size *= 1.5;
+ perf_ctx->unaccumulated =
+ reralloc(perf_ctx->ctx, perf_ctx->unaccumulated,
+ struct gen_perf_query_object *,
+ perf_ctx->unaccumulated_array_size);
+ }
+
+ perf_ctx->unaccumulated[perf_ctx->unaccumulated_elements++] = obj;
+}
+
+bool
+gen_perf_begin_query(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+ const struct gen_perf_query_info *queryinfo = query->queryinfo;
+
+ /* XXX: We have to consider that the command parser unit that parses batch
+ * buffer commands and is used to capture begin/end counter snapshots isn't
+ * implicitly synchronized with what's currently running across other GPU
+ * units (such as the EUs running shaders) that the performance counters are
+ * associated with.
+ *
+ * The intention of performance queries is to measure the work associated
+ * with commands between the begin/end delimiters and so for that to be the
+ * case we need to explicitly synchronize the parsing of commands to capture
+ * Begin/End counter snapshots with what's running across other parts of the
+ * GPU.
+ *
+ * When the command parser reaches a Begin marker it effectively needs to
+ * drain everything currently running on the GPU until the hardware is idle
+ * before capturing the first snapshot of counters - otherwise the results
+ * would also be measuring the effects of earlier commands.
+ *
+ * When the command parser reaches an End marker it needs to stall until
+ * everything currently running on the GPU has finished before capturing the
+ * end snapshot - otherwise the results won't be a complete representation
+ * of the work.
+ *
+ * Theoretically there could be opportunities to minimize how much of the
+ * GPU pipeline is drained, or that we stall for, when we know what specific
+ * units the performance counters being queried relate to but we don't
+ * currently attempt to be clever here.
+ *
+ * Note: with our current simple approach here then for back-to-back queries
+ * we will redundantly emit duplicate commands to synchronize the command
+ * streamer with the rest of the GPU pipeline, but we assume that in HW the
+ * second synchronization is effectively a NOOP.
+ *
+ * N.B. The final results are based on deltas of counters between (inside)
+ * Begin/End markers so even though the total wall clock time of the
+ * workload is stretched by larger pipeline bubbles the bubbles themselves
+ * are generally invisible to the query results. Whether that's a good or a
+ * bad thing depends on the use case. For a lower real-time impact while
+ * capturing metrics then periodic sampling may be a better choice than
+ * INTEL_performance_query.
+ *
+ *
+ * This is our Begin synchronization point to drain current work on the
+ * GPU before we capture our first counter snapshot...
+ */
+ perf_cfg->vtbl.emit_mi_flush(perf_ctx->ctx);
+
+ switch (queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW: {
+
+ /* Opening an i915 perf stream implies exclusive access to the OA unit
+ * which will generate counter reports for a specific counter set with a
+ * specific layout/format so we can't begin any OA based queries that
+ * require a different counter set or format unless we get an opportunity
+ * to close the stream and open a new one...
+ */
+ uint64_t metric_id = get_metric_id(perf_ctx->perf, queryinfo);
+
+ if (perf_ctx->oa_stream_fd != -1 &&
+ perf_ctx->current_oa_metrics_set_id != metric_id) {
+
+ if (perf_ctx->n_oa_users != 0) {
+ DBG("WARNING: Begin failed already using perf config=%i/%"PRIu64"\n",
+ perf_ctx->current_oa_metrics_set_id, metric_id);
+ return false;
+ } else
+ gen_perf_close(perf_ctx, queryinfo);
+ }
+
+ /* If the OA counters aren't already on, enable them. */
+ if (perf_ctx->oa_stream_fd == -1) {
+ const struct gen_device_info *devinfo = perf_ctx->devinfo;
+
+ /* The period_exponent gives a sampling period as follows:
+ * sample_period = timestamp_period * 2^(period_exponent + 1)
+ *
+ * The timestamps increments every 80ns (HSW), ~52ns (GEN9LP) or
+ * ~83ns (GEN8/9).
+ *
+ * The counter overflow period is derived from the EuActive counter
+ * which reads a counter that increments by the number of clock
+ * cycles multiplied by the number of EUs. It can be calculated as:
+ *
+ * 2^(number of bits in A counter) / (n_eus * max_gen_freq * 2)
+ *
+ * (E.g. 40 EUs @ 1GHz = ~53ms)
+ *
+ * We select a sampling period inferior to that overflow period to
+ * ensure we cannot see more than 1 counter overflow, otherwise we
+ * could loose information.
+ */
+
+ int a_counter_in_bits = 32;
+ if (devinfo->gen >= 8)
+ a_counter_in_bits = 40;
+
+ uint64_t overflow_period = pow(2, a_counter_in_bits) / (perf_cfg->sys_vars.n_eus *
+ /* drop 1GHz freq to have units in nanoseconds */
+ 2);
+
+ DBG("A counter overflow period: %"PRIu64"ns, %"PRIu64"ms (n_eus=%"PRIu64")\n",
+ overflow_period, overflow_period / 1000000ul, perf_cfg->sys_vars.n_eus);
+
+ int period_exponent = 0;
+ uint64_t prev_sample_period, next_sample_period;
+ for (int e = 0; e < 30; e++) {
+ prev_sample_period = 1000000000ull * pow(2, e + 1) / devinfo->timestamp_frequency;
+ next_sample_period = 1000000000ull * pow(2, e + 2) / devinfo->timestamp_frequency;
+
+ /* Take the previous sampling period, lower than the overflow
+ * period.
+ */
+ if (prev_sample_period < overflow_period &&
+ next_sample_period > overflow_period)
+ period_exponent = e + 1;
+ }
+
+ if (period_exponent == 0) {
+ DBG("WARNING: enable to find a sampling exponent\n");
+ return false;
+ }
+
+ DBG("OA sampling exponent: %i ~= %"PRIu64"ms\n", period_exponent,
+ prev_sample_period / 1000000ul);
+
+ if (!gen_perf_open(perf_ctx, metric_id, queryinfo->oa_format,
+ period_exponent, perf_ctx->drm_fd,
+ perf_ctx->hw_ctx))
+ return false;
+ } else {
+ assert(perf_ctx->current_oa_metrics_set_id == metric_id &&
+ perf_ctx->current_oa_format == queryinfo->oa_format);
+ }
+
+ if (!inc_n_users(perf_ctx)) {
+ DBG("WARNING: Error enabling i915 perf stream: %m\n");
+ return false;
+ }
+
+ if (query->oa.bo) {
+ perf_cfg->vtbl.bo_unreference(query->oa.bo);
+ query->oa.bo = NULL;
+ }
+
+ query->oa.bo = perf_cfg->vtbl.bo_alloc(perf_ctx->bufmgr,
+ "perf. query OA MI_RPC bo",
+ MI_RPC_BO_SIZE);
+#ifdef DEBUG
+ /* Pre-filling the BO helps debug whether writes landed. */
+ void *map = perf_cfg->vtbl.bo_map(perf_ctx->ctx, query->oa.bo, MAP_WRITE);
+ memset(map, 0x80, MI_RPC_BO_SIZE);
+ perf_cfg->vtbl.bo_unmap(query->oa.bo);
+#endif
+
+ query->oa.begin_report_id = perf_ctx->next_query_start_report_id;
+ perf_ctx->next_query_start_report_id += 2;
+
+ /* We flush the batchbuffer here to minimize the chances that MI_RPC
+ * delimiting commands end up in different batchbuffers. If that's the
+ * case, the measurement will include the time it takes for the kernel
+ * scheduler to load a new request into the hardware. This is manifested in
+ * tools like frameretrace by spikes in the "GPU Core Clocks" counter.
+ */
+ perf_cfg->vtbl.batchbuffer_flush(perf_ctx->ctx, __FILE__, __LINE__);
+
+ /* Take a starting OA counter snapshot. */
+ perf_cfg->vtbl.emit_mi_report_perf_count(perf_ctx->ctx, query->oa.bo, 0,
+ query->oa.begin_report_id);
+ perf_cfg->vtbl.capture_frequency_stat_register(perf_ctx->ctx, query->oa.bo,
+ MI_FREQ_START_OFFSET_BYTES);
+
+ ++perf_ctx->n_active_oa_queries;
+
+ /* No already-buffered samples can possibly be associated with this query
+ * so create a marker within the list of sample buffers enabling us to
+ * easily ignore earlier samples when processing this query after
+ * completion.
+ */
+ assert(!exec_list_is_empty(&perf_ctx->sample_buffers));
+ query->oa.samples_head = exec_list_get_tail(&perf_ctx->sample_buffers);
+
+ struct oa_sample_buf *buf =
+ exec_node_data(struct oa_sample_buf, query->oa.samples_head, link);
+
+ /* This reference will ensure that future/following sample
+ * buffers (that may relate to this query) can't be freed until
+ * this drops to zero.
+ */
+ buf->refcount++;
+
+ gen_perf_query_result_clear(&query->oa.result);
+ query->oa.results_accumulated = false;
+
+ add_to_unaccumulated_query_list(perf_ctx, query);
+ break;
+ }
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ if (query->pipeline_stats.bo) {
+ perf_cfg->vtbl.bo_unreference(query->pipeline_stats.bo);
+ query->pipeline_stats.bo = NULL;
+ }
+
+ query->pipeline_stats.bo =
+ perf_cfg->vtbl.bo_alloc(perf_ctx->bufmgr,
+ "perf. query pipeline stats bo",
+ STATS_BO_SIZE);
+
+ /* Take starting snapshots. */
+ snapshot_statistics_registers(perf_ctx->ctx , perf_cfg, query, 0);
+
+ ++perf_ctx->n_active_pipeline_stats_queries;
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+
+ return true;
+}
+
+void
+gen_perf_end_query(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+
+ /* Ensure that the work associated with the queried commands will have
+ * finished before taking our query end counter readings.
+ *
+ * For more details see comment in brw_begin_perf_query for
+ * corresponding flush.
+ */
+ perf_cfg->vtbl.emit_mi_flush(perf_ctx->ctx);
+
+ switch (query->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+
+ /* NB: It's possible that the query will have already been marked
+ * as 'accumulated' if an error was seen while reading samples
+ * from perf. In this case we mustn't try and emit a closing
+ * MI_RPC command in case the OA unit has already been disabled
+ */
+ if (!query->oa.results_accumulated) {
+ /* Take an ending OA counter snapshot. */
+ perf_cfg->vtbl.capture_frequency_stat_register(perf_ctx->ctx, query->oa.bo,
+ MI_FREQ_END_OFFSET_BYTES);
+ perf_cfg->vtbl.emit_mi_report_perf_count(perf_ctx->ctx, query->oa.bo,
+ MI_RPC_BO_END_OFFSET_BYTES,
+ query->oa.begin_report_id + 1);
+ }
+
+ --perf_ctx->n_active_oa_queries;
+
+ /* NB: even though the query has now ended, it can't be accumulated
+ * until the end MI_REPORT_PERF_COUNT snapshot has been written
+ * to query->oa.bo
+ */
+ break;
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ snapshot_statistics_registers(perf_ctx->ctx, perf_cfg, query,
+ STATS_BO_END_OFFSET_BYTES);
+ --perf_ctx->n_active_pipeline_stats_queries;
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+}
+
+enum OaReadStatus {
+ OA_READ_STATUS_ERROR,
+ OA_READ_STATUS_UNFINISHED,
+ OA_READ_STATUS_FINISHED,
+};
+
+static enum OaReadStatus
+read_oa_samples_until(struct gen_perf_context *perf_ctx,
+ uint32_t start_timestamp,
+ uint32_t end_timestamp)
+{
+ struct exec_node *tail_node =
+ exec_list_get_tail(&perf_ctx->sample_buffers);
+ struct oa_sample_buf *tail_buf =
+ exec_node_data(struct oa_sample_buf, tail_node, link);
+ uint32_t last_timestamp = tail_buf->last_timestamp;
+
+ while (1) {
+ struct oa_sample_buf *buf = get_free_sample_buf(perf_ctx);
+ uint32_t offset;
+ int len;
+
+ while ((len = read(perf_ctx->oa_stream_fd, buf->buf,
+ sizeof(buf->buf))) < 0 && errno == EINTR)
+ ;
+
+ if (len <= 0) {
+ exec_list_push_tail(&perf_ctx->free_sample_buffers, &buf->link);
+
+ if (len < 0) {
+ if (errno == EAGAIN)
+ return ((last_timestamp - start_timestamp) >=
+ (end_timestamp - start_timestamp)) ?
+ OA_READ_STATUS_FINISHED :
+ OA_READ_STATUS_UNFINISHED;
+ else {
+ DBG("Error reading i915 perf samples: %m\n");
+ }
+ } else
+ DBG("Spurious EOF reading i915 perf samples\n");
+
+ return OA_READ_STATUS_ERROR;
+ }
+
+ buf->len = len;
+ exec_list_push_tail(&perf_ctx->sample_buffers, &buf->link);
+
+ /* Go through the reports and update the last timestamp. */
+ offset = 0;
+ while (offset < buf->len) {
+ const struct drm_i915_perf_record_header *header =
+ (const struct drm_i915_perf_record_header *) &buf->buf[offset];
+ uint32_t *report = (uint32_t *) (header + 1);
+
+ if (header->type == DRM_I915_PERF_RECORD_SAMPLE)
+ last_timestamp = report[1];
+
+ offset += header->size;
+ }
+
+ buf->last_timestamp = last_timestamp;
+ }
+
+ unreachable("not reached");
+ return OA_READ_STATUS_ERROR;
+}
+
+/**
+ * Try to read all the reports until either the delimiting timestamp
+ * or an error arises.
+ */
+static bool
+read_oa_samples_for_query(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ void *current_batch)
+{
+ uint32_t *start;
+ uint32_t *last;
+ uint32_t *end;
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+
+ /* We need the MI_REPORT_PERF_COUNT to land before we can start
+ * accumulate. */
+ assert(!perf_cfg->vtbl.batch_references(current_batch, query->oa.bo) &&
+ !perf_cfg->vtbl.bo_busy(query->oa.bo));
+
+ /* Map the BO once here and let accumulate_oa_reports() unmap
+ * it. */
+ if (query->oa.map == NULL)
+ query->oa.map = perf_cfg->vtbl.bo_map(perf_ctx->ctx, query->oa.bo, MAP_READ);
+
+ start = last = query->oa.map;
+ end = query->oa.map + MI_RPC_BO_END_OFFSET_BYTES;
+
+ if (start[0] != query->oa.begin_report_id) {
+ DBG("Spurious start report id=%"PRIu32"\n", start[0]);
+ return true;
+ }
+ if (end[0] != (query->oa.begin_report_id + 1)) {
+ DBG("Spurious end report id=%"PRIu32"\n", end[0]);
+ return true;
+ }
+
+ /* Read the reports until the end timestamp. */
+ switch (read_oa_samples_until(perf_ctx, start[1], end[1])) {
+ case OA_READ_STATUS_ERROR:
+ /* Fallthrough and let accumulate_oa_reports() deal with the
+ * error. */
+ case OA_READ_STATUS_FINISHED:
+ return true;
+ case OA_READ_STATUS_UNFINISHED:
+ return false;
+ }
+
+ unreachable("invalid read status");
+ return false;
+}
+
+void
+gen_perf_wait_query(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ void *current_batch)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+ struct brw_bo *bo = NULL;
+
+ switch (query->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ bo = query->oa.bo;
+ break;
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ bo = query->pipeline_stats.bo;
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+
+ if (bo == NULL)
+ return;
+
+ /* If the current batch references our results bo then we need to
+ * flush first...
+ */
+ if (perf_cfg->vtbl.batch_references(current_batch, bo))
+ perf_cfg->vtbl.batchbuffer_flush(perf_ctx->ctx, __FILE__, __LINE__);
+
+ perf_cfg->vtbl.bo_wait_rendering(bo);
+
+ /* Due to a race condition between the OA unit signaling report
+ * availability and the report actually being written into memory,
+ * we need to wait for all the reports to come in before we can
+ * read them.
+ */
+ if (query->queryinfo->kind == GEN_PERF_QUERY_TYPE_OA ||
+ query->queryinfo->kind == GEN_PERF_QUERY_TYPE_RAW) {
+ while (!read_oa_samples_for_query(perf_ctx, query, current_batch))
+ ;
+ }
+}
+
+bool
+gen_perf_is_query_ready(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ void *current_batch)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+
+ switch (query->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ return (query->oa.results_accumulated ||
+ (query->oa.bo &&
+ !perf_cfg->vtbl.batch_references(current_batch, query->oa.bo) &&
+ !perf_cfg->vtbl.bo_busy(query->oa.bo) &&
+ read_oa_samples_for_query(perf_ctx, query, current_batch)));
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ return (query->pipeline_stats.bo &&
+ !perf_cfg->vtbl.batch_references(current_batch, query->pipeline_stats.bo) &&
+ !perf_cfg->vtbl.bo_busy(query->pipeline_stats.bo));
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+
+ return false;
+}
+
+/**
+ * Remove a query from the global list of unaccumulated queries once
+ * after successfully accumulating the OA reports associated with the
+ * query in accumulate_oa_reports() or when discarding unwanted query
+ * results.
+ */
+static void
+drop_from_unaccumulated_query_list(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query)
+{
+ for (int i = 0; i < perf_ctx->unaccumulated_elements; i++) {
+ if (perf_ctx->unaccumulated[i] == query) {
+ int last_elt = --perf_ctx->unaccumulated_elements;
+
+ if (i == last_elt)
+ perf_ctx->unaccumulated[i] = NULL;
+ else {
+ perf_ctx->unaccumulated[i] =
+ perf_ctx->unaccumulated[last_elt];
+ }
+
+ break;
+ }
+ }
+
+ /* Drop our samples_head reference so that associated periodic
+ * sample data buffers can potentially be reaped if they aren't
+ * referenced by any other queries...
+ */
+
+ struct oa_sample_buf *buf =
+ exec_node_data(struct oa_sample_buf, query->oa.samples_head, link);
+
+ assert(buf->refcount > 0);
+ buf->refcount--;
+
+ query->oa.samples_head = NULL;
+
+ reap_old_sample_buffers(perf_ctx);
+}
+
+/* In general if we see anything spurious while accumulating results,
+ * we don't try and continue accumulating the current query, hoping
+ * for the best, we scrap anything outstanding, and then hope for the
+ * best with new queries.
+ */
+static void
+discard_all_queries(struct gen_perf_context *perf_ctx)
+{
+ while (perf_ctx->unaccumulated_elements) {
+ struct gen_perf_query_object *query = perf_ctx->unaccumulated[0];
+
+ query->oa.results_accumulated = true;
+ drop_from_unaccumulated_query_list(perf_ctx, query);
+
+ dec_n_users(perf_ctx);
+ }
+}
+
+/**
+ * Accumulate raw OA counter values based on deltas between pairs of
+ * OA reports.
+ *
+ * Accumulation starts from the first report captured via
+ * MI_REPORT_PERF_COUNT (MI_RPC) by brw_begin_perf_query() until the
+ * last MI_RPC report requested by brw_end_perf_query(). Between these
+ * two reports there may also some number of periodically sampled OA
+ * reports collected via the i915 perf interface - depending on the
+ * duration of the query.
+ *
+ * These periodic snapshots help to ensure we handle counter overflow
+ * correctly by being frequent enough to ensure we don't miss multiple
+ * overflows of a counter between snapshots. For Gen8+ the i915 perf
+ * snapshots provide the extra context-switch reports that let us
+ * subtract out the progress of counters associated with other
+ * contexts running on the system.
+ */
+static void
+accumulate_oa_reports(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query)
+{
+ const struct gen_device_info *devinfo = perf_ctx->devinfo;
+ uint32_t *start;
+ uint32_t *last;
+ uint32_t *end;
+ struct exec_node *first_samples_node;
+ bool in_ctx = true;
+ int out_duration = 0;
+
+ assert(query->oa.map != NULL);
+
+ start = last = query->oa.map;
+ end = query->oa.map + MI_RPC_BO_END_OFFSET_BYTES;
+
+ if (start[0] != query->oa.begin_report_id) {
+ DBG("Spurious start report id=%"PRIu32"\n", start[0]);
+ goto error;
+ }
+ if (end[0] != (query->oa.begin_report_id + 1)) {
+ DBG("Spurious end report id=%"PRIu32"\n", end[0]);
+ goto error;
+ }
+
+ /* On Gen12+ OA reports are sourced from per context counters, so we don't
+ * ever have to look at the global OA buffer. Yey \o/
+ */
+ if (perf_ctx->devinfo->gen >= 12) {
+ last = start;
+ goto end;
+ }
+
+ /* See if we have any periodic reports to accumulate too... */
+
+ /* N.B. The oa.samples_head was set when the query began and
+ * pointed to the tail of the perf_ctx->sample_buffers list at
+ * the time the query started. Since the buffer existed before the
+ * first MI_REPORT_PERF_COUNT command was emitted we therefore know
+ * that no data in this particular node's buffer can possibly be
+ * associated with the query - so skip ahead one...
+ */
+ first_samples_node = query->oa.samples_head->next;
+
+ foreach_list_typed_from(struct oa_sample_buf, buf, link,
+ &perf_ctx.sample_buffers,
+ first_samples_node)
+ {
+ int offset = 0;
+
+ while (offset < buf->len) {
+ const struct drm_i915_perf_record_header *header =
+ (const struct drm_i915_perf_record_header *)(buf->buf + offset);
+
+ assert(header->size != 0);
+ assert(header->size <= buf->len);
+
+ offset += header->size;
+
+ switch (header->type) {
+ case DRM_I915_PERF_RECORD_SAMPLE: {
+ uint32_t *report = (uint32_t *)(header + 1);
+ bool add = true;
+
+ /* Ignore reports that come before the start marker.
+ * (Note: takes care to allow overflow of 32bit timestamps)
+ */
+ if (gen_device_info_timebase_scale(devinfo,
+ report[1] - start[1]) > 5000000000) {
+ continue;
+ }
+
+ /* Ignore reports that come after the end marker.
+ * (Note: takes care to allow overflow of 32bit timestamps)
+ */
+ if (gen_device_info_timebase_scale(devinfo,
+ report[1] - end[1]) <= 5000000000) {
+ goto end;
+ }
+
+ /* For Gen8+ since the counters continue while other
+ * contexts are running we need to discount any unrelated
+ * deltas. The hardware automatically generates a report
+ * on context switch which gives us a new reference point
+ * to continuing adding deltas from.
+ *
+ * For Haswell we can rely on the HW to stop the progress
+ * of OA counters while any other context is acctive.
+ */
+ if (devinfo->gen >= 8) {
+ if (in_ctx && report[2] != query->oa.result.hw_id) {
+ DBG("i915 perf: Switch AWAY (observed by ID change)\n");
+ in_ctx = false;
+ out_duration = 0;
+ } else if (in_ctx == false && report[2] == query->oa.result.hw_id) {
+ DBG("i915 perf: Switch TO\n");
+ in_ctx = true;
+
+ /* From experimentation in IGT, we found that the OA unit
+ * might label some report as "idle" (using an invalid
+ * context ID), right after a report for a given context.
+ * Deltas generated by those reports actually belong to the
+ * previous context, even though they're not labelled as
+ * such.
+ *
+ * We didn't *really* Switch AWAY in the case that we e.g.
+ * saw a single periodic report while idle...
+ */
+ if (out_duration >= 1)
+ add = false;
+ } else if (in_ctx) {
+ assert(report[2] == query->oa.result.hw_id);
+ DBG("i915 perf: Continuation IN\n");
+ } else {
+ assert(report[2] != query->oa.result.hw_id);
+ DBG("i915 perf: Continuation OUT\n");
+ add = false;
+ out_duration++;
+ }
+ }
+
+ if (add) {
+ gen_perf_query_result_accumulate(&query->oa.result,
+ query->queryinfo,
+ last, report);
+ }
+
+ last = report;
+
+ break;
+ }
+
+ case DRM_I915_PERF_RECORD_OA_BUFFER_LOST:
+ DBG("i915 perf: OA error: all reports lost\n");
+ goto error;
+ case DRM_I915_PERF_RECORD_OA_REPORT_LOST:
+ DBG("i915 perf: OA report lost\n");
+ break;
+ }
+ }
+ }
+
+end:
+
+ gen_perf_query_result_accumulate(&query->oa.result, query->queryinfo,
+ last, end);
+
+ query->oa.results_accumulated = true;
+ drop_from_unaccumulated_query_list(perf_ctx, query);
+ dec_n_users(perf_ctx);
+
+ return;
+
+error:
+
+ discard_all_queries(perf_ctx);
+}
+
+void
+gen_perf_delete_query(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+
+ /* We can assume that the frontend waits for a query to complete
+ * before ever calling into here, so we don't have to worry about
+ * deleting an in-flight query object.
+ */
+ switch (query->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ if (query->oa.bo) {
+ if (!query->oa.results_accumulated) {
+ drop_from_unaccumulated_query_list(perf_ctx, query);
+ dec_n_users(perf_ctx);
+ }
+
+ perf_cfg->vtbl.bo_unreference(query->oa.bo);
+ query->oa.bo = NULL;
+ }
+
+ query->oa.results_accumulated = false;
+ break;
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ if (query->pipeline_stats.bo) {
+ perf_cfg->vtbl.bo_unreference(query->pipeline_stats.bo);
+ query->pipeline_stats.bo = NULL;
+ }
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+
+ /* As an indication that the INTEL_performance_query extension is no
+ * longer in use, it's a good time to free our cache of sample
+ * buffers and close any current i915-perf stream.
+ */
+ if (--perf_ctx->n_query_instances == 0) {
+ free_sample_bufs(perf_ctx);
+ gen_perf_close(perf_ctx, query->queryinfo);
+ }
+
+ free(query);
+}
+
+#define GET_FIELD(word, field) (((word) & field ## _MASK) >> field ## _SHIFT)
+
+static void
+read_gt_frequency(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *obj)
+{
+ const struct gen_device_info *devinfo = perf_ctx->devinfo;
+ uint32_t start = *((uint32_t *)(obj->oa.map + MI_FREQ_START_OFFSET_BYTES)),
+ end = *((uint32_t *)(obj->oa.map + MI_FREQ_END_OFFSET_BYTES));
+
+ switch (devinfo->gen) {
+ case 7:
+ case 8:
+ obj->oa.gt_frequency[0] = GET_FIELD(start, GEN7_RPSTAT1_CURR_GT_FREQ) * 50ULL;
+ obj->oa.gt_frequency[1] = GET_FIELD(end, GEN7_RPSTAT1_CURR_GT_FREQ) * 50ULL;
+ break;
+ case 9:
+ case 10:
+ case 11:
+ obj->oa.gt_frequency[0] = GET_FIELD(start, GEN9_RPSTAT0_CURR_GT_FREQ) * 50ULL / 3ULL;
+ obj->oa.gt_frequency[1] = GET_FIELD(end, GEN9_RPSTAT0_CURR_GT_FREQ) * 50ULL / 3ULL;
+ break;
+ default:
+ unreachable("unexpected gen");
+ }
+
+ /* Put the numbers into Hz. */
+ obj->oa.gt_frequency[0] *= 1000000ULL;
+ obj->oa.gt_frequency[1] *= 1000000ULL;
+}
+
+static int
+get_oa_counter_data(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ size_t data_size,
+ uint8_t *data)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+ const struct gen_perf_query_info *queryinfo = query->queryinfo;
+ int n_counters = queryinfo->n_counters;
+ int written = 0;
+
+ for (int i = 0; i < n_counters; i++) {
+ const struct gen_perf_query_counter *counter = &queryinfo->counters[i];
+ uint64_t *out_uint64;
+ float *out_float;
+ size_t counter_size = gen_perf_query_counter_get_size(counter);
+
+ if (counter_size) {
+ switch (counter->data_type) {
+ case GEN_PERF_COUNTER_DATA_TYPE_UINT64:
+ out_uint64 = (uint64_t *)(data + counter->offset);
+ *out_uint64 =
+ counter->oa_counter_read_uint64(perf_cfg, queryinfo,
+ query->oa.result.accumulator);
+ break;
+ case GEN_PERF_COUNTER_DATA_TYPE_FLOAT:
+ out_float = (float *)(data + counter->offset);
+ *out_float =
+ counter->oa_counter_read_float(perf_cfg, queryinfo,
+ query->oa.result.accumulator);
+ break;
+ default:
+ /* So far we aren't using uint32, double or bool32... */
+ unreachable("unexpected counter data type");
+ }
+ written = counter->offset + counter_size;
+ }
+ }
+
+ return written;
+}
+
+static int
+get_pipeline_stats_data(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ size_t data_size,
+ uint8_t *data)
+
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+ const struct gen_perf_query_info *queryinfo = query->queryinfo;
+ int n_counters = queryinfo->n_counters;
+ uint8_t *p = data;
+
+ uint64_t *start = perf_cfg->vtbl.bo_map(perf_ctx->ctx, query->pipeline_stats.bo, MAP_READ);
+ uint64_t *end = start + (STATS_BO_END_OFFSET_BYTES / sizeof(uint64_t));
+
+ for (int i = 0; i < n_counters; i++) {
+ const struct gen_perf_query_counter *counter = &queryinfo->counters[i];
+ uint64_t value = end[i] - start[i];
+
+ if (counter->pipeline_stat.numerator !=
+ counter->pipeline_stat.denominator) {
+ value *= counter->pipeline_stat.numerator;
+ value /= counter->pipeline_stat.denominator;
+ }
+
+ *((uint64_t *)p) = value;
+ p += 8;
+ }
+
+ perf_cfg->vtbl.bo_unmap(query->pipeline_stats.bo);
+
+ return p - data;
+}
+
+void
+gen_perf_get_query_data(struct gen_perf_context *perf_ctx,
+ struct gen_perf_query_object *query,
+ int data_size,
+ unsigned *data,
+ unsigned *bytes_written)
+{
+ struct gen_perf_config *perf_cfg = perf_ctx->perf;
+ int written = 0;
+
+ switch (query->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ if (!query->oa.results_accumulated) {
+ read_gt_frequency(perf_ctx, query);
+ uint32_t *begin_report = query->oa.map;
+ uint32_t *end_report = query->oa.map + MI_RPC_BO_END_OFFSET_BYTES;
+ gen_perf_query_result_read_frequencies(&query->oa.result,
+ perf_ctx->devinfo,
+ begin_report,
+ end_report);
+ accumulate_oa_reports(perf_ctx, query);
+ assert(query->oa.results_accumulated);
+
+ perf_cfg->vtbl.bo_unmap(query->oa.bo);
+ query->oa.map = NULL;
+ }
+ if (query->queryinfo->kind == GEN_PERF_QUERY_TYPE_OA) {
+ written = get_oa_counter_data(perf_ctx, query, data_size, (uint8_t *)data);
+ } else {
+ const struct gen_device_info *devinfo = perf_ctx->devinfo;
+
+ written = gen_perf_query_result_write_mdapi((uint8_t *)data, data_size,
+ devinfo, &query->oa.result,
+ query->oa.gt_frequency[0],
+ query->oa.gt_frequency[1]);
+ }
+ break;
+
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ written = get_pipeline_stats_data(perf_ctx, query, data_size, (uint8_t *)data);
+ break;
+
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+
+ if (bytes_written)
+ *bytes_written = written;
+}
+
+void
+gen_perf_dump_query_count(struct gen_perf_context *perf_ctx)
+{
+ DBG("Queries: (Open queries = %d, OA users = %d)\n",
+ perf_ctx->n_active_oa_queries, perf_ctx->n_oa_users);
+}
+
+void
+gen_perf_dump_query(struct gen_perf_context *ctx,
+ struct gen_perf_query_object *obj,
+ void *current_batch)
+{
+ switch (obj->queryinfo->kind) {
+ case GEN_PERF_QUERY_TYPE_OA:
+ case GEN_PERF_QUERY_TYPE_RAW:
+ DBG("BO: %-4s OA data: %-10s %-15s\n",
+ obj->oa.bo ? "yes," : "no,",
+ gen_perf_is_query_ready(ctx, obj, current_batch) ? "ready," : "not ready,",
+ obj->oa.results_accumulated ? "accumulated" : "not accumulated");
+ break;
+ case GEN_PERF_QUERY_TYPE_PIPELINE:
+ DBG("BO: %-4s\n",
+ obj->pipeline_stats.bo ? "yes" : "no");
+ break;
+ default:
+ unreachable("Unknown query type");
+ break;
+ }
+}