#include "genxml/gen_macros.h"
#include "genxml/genX_pack.h"
+#include "vk_util.h"
+
+#if GEN_GEN == 10
+/**
+ * From Gen10 Workarounds page in h/w specs:
+ * WaSampleOffsetIZ:
+ * "Prior to the 3DSTATE_SAMPLE_PATTERN driver must ensure there are no
+ * markers in the pipeline by programming a PIPE_CONTROL with stall."
+ */
+static void
+gen10_emit_wa_cs_stall_flush(struct anv_batch *batch)
+{
+
+ anv_batch_emit(batch, GENX(PIPE_CONTROL), pc) {
+ pc.CommandStreamerStallEnable = true;
+ pc.StallAtPixelScoreboard = true;
+ }
+}
+
+/**
+ * From Gen10 Workarounds page in h/w specs:
+ * WaSampleOffsetIZ:_cs_stall_flush
+ * "When 3DSTATE_SAMPLE_PATTERN is programmed, driver must then issue an
+ * MI_LOAD_REGISTER_IMM command to an offset between 0x7000 and 0x7FFF(SVL)
+ * after the command to ensure the state has been delivered prior to any
+ * command causing a marker in the pipeline."
+ */
+static void
+gen10_emit_wa_lri_to_cache_mode_zero(struct anv_batch *batch)
+{
+ /* Before changing the value of CACHE_MODE_0 register, GFX pipeline must
+ * be idle; i.e., full flush is required.
+ */
+ anv_batch_emit(batch, GENX(PIPE_CONTROL), pc) {
+ pc.DepthCacheFlushEnable = true;
+ pc.DCFlushEnable = true;
+ pc.RenderTargetCacheFlushEnable = true;
+ pc.InstructionCacheInvalidateEnable = true;
+ pc.StateCacheInvalidationEnable = true;
+ pc.TextureCacheInvalidationEnable = true;
+ pc.VFCacheInvalidationEnable = true;
+ pc.ConstantCacheInvalidationEnable =true;
+ }
+
+ /* Write to CACHE_MODE_0 (0x7000) */
+ uint32_t cache_mode_0 = 0;
+ anv_pack_struct(&cache_mode_0, GENX(CACHE_MODE_0));
+
+ anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
+ lri.RegisterOffset = GENX(CACHE_MODE_0_num);
+ lri.DataDWord = cache_mode_0;
+ }
+}
+#endif
+
VkResult
genX(init_device_state)(struct anv_device *device)
{
}
#endif
+#if GEN_GEN == 10
+ uint32_t cache_mode_ss;
+ anv_pack_struct(&cache_mode_ss, GENX(CACHE_MODE_SS),
+ .FloatBlendOptimizationEnable = true,
+ .FloatBlendOptimizationEnableMask = true);
+
+ anv_batch_emit(&batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
+ lri.RegisterOffset = GENX(CACHE_MODE_SS_num);
+ lri.DataDWord = cache_mode_ss;
+ }
+#endif
+
anv_batch_emit(&batch, GENX(3DSTATE_AA_LINE_PARAMETERS), aa);
anv_batch_emit(&batch, GENX(3DSTATE_DRAWING_RECTANGLE), rect) {
#if GEN_GEN >= 8
anv_batch_emit(&batch, GENX(3DSTATE_WM_CHROMAKEY), ck);
+#if GEN_GEN == 10
+ gen10_emit_wa_cs_stall_flush(&batch);
+#endif
+
/* See the Vulkan 1.0 spec Table 24.1 "Standard sample locations" and
* VkPhysicalDeviceFeatures::standardSampleLocations.
*/
}
#endif
+#if GEN_GEN == 10
+ gen10_emit_wa_lri_to_cache_mode_zero(&batch);
+#endif
+
anv_batch_emit(&batch, GENX(MI_BATCH_BUFFER_END), bbe);
assert(batch.next <= batch.end);
uint32_t border_color_offset = device->border_colors.offset +
pCreateInfo->borderColor * 64;
- bool enable_min_filter_addr_rounding =
- pCreateInfo->minFilter != VK_FILTER_NEAREST;
- bool enable_mag_filter_addr_rounding =
- pCreateInfo->magFilter != VK_FILTER_NEAREST;
+ vk_foreach_struct(ext, pCreateInfo->pNext) {
+ switch (ext->sType) {
+ case VK_STRUCTURE_TYPE_SAMPLER_YCBCR_CONVERSION_INFO_KHR: {
+ VkSamplerYcbcrConversionInfoKHR *pSamplerConversion =
+ (VkSamplerYcbcrConversionInfoKHR *) ext;
+ ANV_FROM_HANDLE(anv_ycbcr_conversion, conversion,
+ pSamplerConversion->conversion);
+
+ if (conversion == NULL)
+ break;
+
+ sampler->n_planes = conversion->format->n_planes;
+ sampler->conversion = conversion;
+ break;
+ }
+ default:
+ anv_debug_ignored_stype(ext->sType);
+ break;
+ }
+ }
for (unsigned p = 0; p < sampler->n_planes; p++) {
+ const bool plane_has_chroma =
+ sampler->conversion && sampler->conversion->format->planes[p].has_chroma;
+ const VkFilter min_filter =
+ plane_has_chroma ? sampler->conversion->chroma_filter : pCreateInfo->minFilter;
+ const VkFilter mag_filter =
+ plane_has_chroma ? sampler->conversion->chroma_filter : pCreateInfo->magFilter;
+ const bool enable_min_filter_addr_rounding = min_filter != VK_FILTER_NEAREST;
+ const bool enable_mag_filter_addr_rounding = mag_filter != VK_FILTER_NEAREST;
+ /* From Broadwell PRM, SAMPLER_STATE:
+ * "Mip Mode Filter must be set to MIPFILTER_NONE for Planar YUV surfaces."
+ */
+ const uint32_t mip_filter_mode =
+ (sampler->conversion &&
+ isl_format_is_yuv(sampler->conversion->format->planes[0].isl_format)) ?
+ MIPFILTER_NONE : vk_to_gen_mipmap_mode[pCreateInfo->mipmapMode];
+
struct GENX(SAMPLER_STATE) sampler_state = {
.SamplerDisable = false,
.TextureBorderColorMode = DX10OGL,
#if GEN_GEN == 8
.BaseMipLevel = 0.0,
#endif
- .MipModeFilter = vk_to_gen_mipmap_mode[pCreateInfo->mipmapMode],
- .MagModeFilter = vk_to_gen_tex_filter(pCreateInfo->magFilter,
- pCreateInfo->anisotropyEnable),
- .MinModeFilter = vk_to_gen_tex_filter(pCreateInfo->minFilter,
- pCreateInfo->anisotropyEnable),
+ .MipModeFilter = mip_filter_mode,
+ .MagModeFilter = vk_to_gen_tex_filter(mag_filter, pCreateInfo->anisotropyEnable),
+ .MinModeFilter = vk_to_gen_tex_filter(min_filter, pCreateInfo->anisotropyEnable),
.TextureLODBias = anv_clamp_f(pCreateInfo->mipLodBias, -16, 15.996),
.AnisotropicAlgorithm = EWAApproximation,
.MinLOD = anv_clamp_f(pCreateInfo->minLod, 0, 14),
projects / mesa.git / blobdiff