/*
+ * Copyright (c) 2012 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
* Copyright (c) 2006 The Regents of The University of Michigan
+ * Copyright (c) 2010 Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Authors: Ron Dreslinski
* Steve Reinhardt
* Ali Saidi
+ * Andreas Hansson
*/
/**
#ifndef __MEM_PACKET_HH__
#define __MEM_PACKET_HH__
+#include <bitset>
#include <cassert>
#include <list>
-#include <bitset>
+#include "base/cast.hh"
#include "base/compiler.hh"
-#include "base/fast_alloc.hh"
+#include "base/flags.hh"
#include "base/misc.hh"
+#include "base/printable.hh"
+#include "base/types.hh"
#include "mem/request.hh"
-#include "sim/host.hh"
#include "sim/core.hh"
-
-struct Packet;
+class Packet;
typedef Packet *PacketPtr;
typedef uint8_t* PacketDataPtr;
typedef std::list<PacketPtr> PacketList;
class MemCmd
{
- public:
+ friend class Packet;
- /** List of all commands associated with a packet. */
+ public:
+ /**
+ * List of all commands associated with a packet.
+ */
enum Command
{
InvalidCmd,
ReadReq,
ReadResp,
+ ReadRespWithInvalidate,
WriteReq,
WriteResp,
Writeback,
HardPFReq,
SoftPFResp,
HardPFResp,
+ // WriteInvalidateReq transactions used to be generated by the
+ // DMA ports when writing full blocks to memory, however, it
+ // is not used anymore since we put the I/O cache in place to
+ // deal with partial block writes. Hence, WriteInvalidateReq
+ // and WriteInvalidateResp are currently unused. The
+ // implication is that the I/O cache does read-exclusive
+ // operations on every full-cache-block DMA, and ultimately
+ // this needs to be fixed.
WriteInvalidateReq,
WriteInvalidateResp,
UpgradeReq,
+ SCUpgradeReq, // Special "weak" upgrade for StoreCond
UpgradeResp,
+ SCUpgradeFailReq, // Failed SCUpgradeReq in MSHR (never sent)
+ UpgradeFailResp, // Valid for SCUpgradeReq only
ReadExReq,
ReadExResp,
LoadLockedReq,
- LoadLockedResp,
StoreCondReq,
+ StoreCondFailReq, // Failed StoreCondReq in MSHR (never sent)
StoreCondResp,
SwapReq,
SwapResp,
+ MessageReq,
+ MessageResp,
+ // Error responses
+ // @TODO these should be classified as responses rather than
+ // requests; coding them as requests initially for backwards
+ // compatibility
+ InvalidDestError, // packet dest field invalid
+ BadAddressError, // memory address invalid
+ FunctionalReadError, // unable to fulfill functional read
+ FunctionalWriteError, // unable to fulfill functional write
+ // Fake simulator-only commands
+ PrintReq, // Print state matching address
+ FlushReq, //request for a cache flush
+ InvalidationReq, // request for address to be invalidated from lsq
NUM_MEM_CMDS
};
private:
- /** List of command attributes. */
+ /**
+ * List of command attributes.
+ */
enum Attribute
{
IsRead, //!< Data flows from responder to requester
IsWrite, //!< Data flows from requester to responder
- IsPrefetch, //!< Not a demand access
+ IsUpgrade,
IsInvalidate,
NeedsExclusive, //!< Requires exclusive copy to complete in-cache
IsRequest, //!< Issued by requester
NeedsResponse, //!< Requester needs response from target
IsSWPrefetch,
IsHWPrefetch,
- IsLocked, //!< Alpha/MIPS LL or SC access
+ IsLlsc, //!< Alpha/MIPS LL or SC access
HasData, //!< There is an associated payload
+ IsError, //!< Error response
+ IsPrint, //!< Print state matching address (for debugging)
+ IsFlush, //!< Flush the address from caches
NUM_COMMAND_ATTRIBUTES
};
- /** Structure that defines attributes and other data associated
- * with a Command. */
- struct CommandInfo {
- /** Set of attribute flags. */
+ /**
+ * Structure that defines attributes and other data associated
+ * with a Command.
+ */
+ struct CommandInfo
+ {
+ /// Set of attribute flags.
const std::bitset<NUM_COMMAND_ATTRIBUTES> attributes;
- /** Corresponding response for requests; InvalidCmd if no
- * response is applicable. */
+ /// Corresponding response for requests; InvalidCmd if no
+ /// response is applicable.
const Command response;
- /** String representation (for printing) */
+ /// String representation (for printing)
const std::string str;
};
- /** Array to map Command enum to associated info. */
+ /// Array to map Command enum to associated info.
static const CommandInfo commandInfo[];
private:
Command cmd;
- bool testCmdAttrib(MemCmd::Attribute attrib) const {
+ bool
+ testCmdAttrib(MemCmd::Attribute attrib) const
+ {
return commandInfo[cmd].attributes[attrib] != 0;
}
public:
bool isRead() const { return testCmdAttrib(IsRead); }
- bool isWrite() const { return testCmdAttrib(IsWrite); }
+ bool isWrite() const { return testCmdAttrib(IsWrite); }
+ bool isUpgrade() const { return testCmdAttrib(IsUpgrade); }
bool isRequest() const { return testCmdAttrib(IsRequest); }
bool isResponse() const { return testCmdAttrib(IsResponse); }
- bool needsExclusive() const { return testCmdAttrib(NeedsExclusive); }
+ bool needsExclusive() const { return testCmdAttrib(NeedsExclusive); }
bool needsResponse() const { return testCmdAttrib(NeedsResponse); }
bool isInvalidate() const { return testCmdAttrib(IsInvalidate); }
bool hasData() const { return testCmdAttrib(HasData); }
bool isReadWrite() const { return isRead() && isWrite(); }
- bool isLocked() const { return testCmdAttrib(IsLocked); }
+ bool isLLSC() const { return testCmdAttrib(IsLlsc); }
+ bool isError() const { return testCmdAttrib(IsError); }
+ bool isPrint() const { return testCmdAttrib(IsPrint); }
+ bool isFlush() const { return testCmdAttrib(IsFlush); }
- const Command responseCommand() const {
+ const Command
+ responseCommand() const
+ {
return commandInfo[cmd].response;
}
- /** Return the string to a cmd given by idx. */
- const std::string &toString() const {
- return commandInfo[cmd].str;
- }
-
+ /// Return the string to a cmd given by idx.
+ const std::string &toString() const { return commandInfo[cmd].str; }
int toInt() const { return (int)cmd; }
- MemCmd(Command _cmd)
- : cmd(_cmd)
- { }
-
- MemCmd(int _cmd)
- : cmd((Command)_cmd)
- { }
+ MemCmd(Command _cmd) : cmd(_cmd) { }
+ MemCmd(int _cmd) : cmd((Command)_cmd) { }
+ MemCmd() : cmd(InvalidCmd) { }
- MemCmd()
- : cmd(InvalidCmd)
- { }
-
- bool operator==(MemCmd c2) { return (cmd == c2.cmd); }
- bool operator!=(MemCmd c2) { return (cmd != c2.cmd); }
-
- friend class Packet;
+ bool operator==(MemCmd c2) const { return (cmd == c2.cmd); }
+ bool operator!=(MemCmd c2) const { return (cmd != c2.cmd); }
};
/**
* ultimate destination and back, possibly being conveyed by several
* different Packets along the way.)
*/
-class Packet : public FastAlloc
+class Packet : public Printable
{
public:
+ typedef uint32_t FlagsType;
+ typedef ::Flags<FlagsType> Flags;
+
+ private:
+ static const FlagsType PUBLIC_FLAGS = 0x00000000;
+ static const FlagsType PRIVATE_FLAGS = 0x00007F0F;
+ static const FlagsType COPY_FLAGS = 0x0000000F;
+
+ static const FlagsType SHARED = 0x00000001;
+ // Special control flags
+ /// Special timing-mode atomic snoop for multi-level coherence.
+ static const FlagsType EXPRESS_SNOOP = 0x00000002;
+ /// Does supplier have exclusive copy?
+ /// Useful for multi-level coherence.
+ static const FlagsType SUPPLY_EXCLUSIVE = 0x00000004;
+ // Snoop response flags
+ static const FlagsType MEM_INHIBIT = 0x00000008;
+ /// Are the 'addr' and 'size' fields valid?
+ static const FlagsType VALID_ADDR = 0x00000100;
+ static const FlagsType VALID_SIZE = 0x00000200;
+ /// Is the data pointer set to a value that shouldn't be freed
+ /// when the packet is destroyed?
+ static const FlagsType STATIC_DATA = 0x00001000;
+ /// The data pointer points to a value that should be freed when
+ /// the packet is destroyed.
+ static const FlagsType DYNAMIC_DATA = 0x00002000;
+ /// the data pointer points to an array (thus delete []) needs to
+ /// be called on it rather than simply delete.
+ static const FlagsType ARRAY_DATA = 0x00004000;
+ /// suppress the error if this packet encounters a functional
+ /// access failure.
+ static const FlagsType SUPPRESS_FUNC_ERROR = 0x00008000;
+
+ Flags flags;
+ public:
typedef MemCmd::Command Command;
+ /// The command field of the packet.
+ MemCmd cmd;
+
+ /// A pointer to the original request.
+ RequestPtr req;
+
private:
- /** A pointer to the data being transfered. It can be differnt
- * sizes at each level of the heirarchy so it belongs in the
- * packet, not request. This may or may not be populated when a
- * responder recieves the packet. If not populated it memory
- * should be allocated.
+ /**
+ * A pointer to the data being transfered. It can be differnt
+ * sizes at each level of the heirarchy so it belongs in the
+ * packet, not request. This may or may not be populated when a
+ * responder recieves the packet. If not populated it memory should
+ * be allocated.
*/
PacketDataPtr data;
- /** Is the data pointer set to a value that shouldn't be freed
- * when the packet is destroyed? */
- bool staticData;
- /** The data pointer points to a value that should be freed when
- * the packet is destroyed. */
- bool dynamicData;
- /** the data pointer points to an array (thus delete [] ) needs to
- * be called on it rather than simply delete.*/
- bool arrayData;
-
- /** The address of the request. This address could be virtual or
- * physical, depending on the system configuration. */
+ /// The address of the request. This address could be virtual or
+ /// physical, depending on the system configuration.
Addr addr;
- /** The size of the request or transfer. */
- int size;
-
- /** Device address (e.g., bus ID) of the source of the
- * transaction. The source is not responsible for setting this
- * field; it is set implicitly by the interconnect when the
- * packet is first sent. */
- short src;
-
- /** Device address (e.g., bus ID) of the destination of the
- * transaction. The special value Broadcast indicates that the
- * packet should be routed based on its address. This field is
- * initialized in the constructor and is thus always valid
- * (unlike * addr, size, and src). */
- short dest;
-
- /** Are the 'addr' and 'size' fields valid? */
- bool addrSizeValid;
- /** Is the 'src' field valid? */
- bool srcValid;
-
- enum SnoopFlag {
- MemInhibit,
- Shared,
- NUM_SNOOP_FLAGS
- };
+ /// The size of the request or transfer.
+ unsigned size;
- /** Coherence snoopFlags for snooping */
- std::bitset<NUM_SNOOP_FLAGS> snoopFlags;
+ /**
+ * Source port identifier set on a request packet to enable
+ * appropriate routing of the responses. The source port
+ * identifier is set by any multiplexing component, e.g. a bus, as
+ * the timing responses need this information to be routed back to
+ * the appropriate port at a later point in time. The field can be
+ * updated (over-written) as the request packet passes through
+ * additional multiplexing components, and it is their
+ * responsibility to remember the original source port identifier,
+ * for example by using an appropriate sender state. The latter is
+ * done in the cache and bridge.
+ */
+ PortID src;
- public:
+ /**
+ * Destination port identifier that is present on all response
+ * packets that passed through a multiplexing component as a
+ * request packet. The source port identifier is turned into a
+ * destination port identifier when the packet is turned into a
+ * response, and the destination is used, e.g. by the bus, to
+ * select the appropriate path through the interconnect.
+ */
+ PortID dest;
+
+ /**
+ * The original value of the command field. Only valid when the
+ * current command field is an error condition; in that case, the
+ * previous contents of the command field are copied here. This
+ * field is *not* set on non-error responses.
+ */
+ MemCmd origCmd;
- /** Used to calculate latencies for each packet.*/
+ /**
+ * These values specify the range of bytes found that satisfy a
+ * functional read.
+ */
+ uint16_t bytesValidStart;
+ uint16_t bytesValidEnd;
+
+ public:
+ /// Used to calculate latencies for each packet.
Tick time;
- /** The time at which the packet will be fully transmitted */
+ /// The time at which the packet will be fully transmitted
Tick finishTime;
- /** The time at which the first chunk of the packet will be transmitted */
+ /// The time at which the first chunk of the packet will be transmitted
Tick firstWordTime;
- /** The special destination address indicating that the packet
- * should be routed based on its address. */
- static const short Broadcast = -1;
-
- /** A pointer to the original request. */
- RequestPtr req;
-
- /** A virtual base opaque structure used to hold coherence-related
- * state. A specific subclass would be derived from this to
- * carry state specific to a particular coherence protocol. */
- class CoherenceState : public FastAlloc {
- public:
- virtual ~CoherenceState() {}
+ /**
+ * A virtual base opaque structure used to hold state associated
+ * with the packet but specific to the sending device (e.g., an
+ * MSHR). A pointer to this state is returned in the packet's
+ * response so that the sender can quickly look up the state
+ * needed to process it. A specific subclass would be derived
+ * from this to carry state specific to a particular sending
+ * device.
+ */
+ struct SenderState
+ {
+ virtual ~SenderState() {}
};
- /** This packet's coherence state. Caches should use
- * dynamic_cast<> to cast to the state appropriate for the
- * system's coherence protocol. */
- CoherenceState *coherence;
-
- /** A virtual base opaque structure used to hold state associated
- * with the packet but specific to the sending device (e.g., an
- * MSHR). A pointer to this state is returned in the packet's
- * response so that the sender can quickly look up the state
- * needed to process it. A specific subclass would be derived
- * from this to carry state specific to a particular sending
- * device. */
- class SenderState : public FastAlloc {
+ /**
+ * Object used to maintain state of a PrintReq. The senderState
+ * field of a PrintReq should always be of this type.
+ */
+ class PrintReqState : public SenderState
+ {
+ private:
+ /**
+ * An entry in the label stack.
+ */
+ struct LabelStackEntry
+ {
+ const std::string label;
+ std::string *prefix;
+ bool labelPrinted;
+ LabelStackEntry(const std::string &_label, std::string *_prefix);
+ };
+
+ typedef std::list<LabelStackEntry> LabelStack;
+ LabelStack labelStack;
+
+ std::string *curPrefixPtr;
+
public:
- virtual ~SenderState() {}
+ std::ostream &os;
+ const int verbosity;
+
+ PrintReqState(std::ostream &os, int verbosity = 0);
+ ~PrintReqState();
+
+ /**
+ * Returns the current line prefix.
+ */
+ const std::string &curPrefix() { return *curPrefixPtr; }
+
+ /**
+ * Push a label onto the label stack, and prepend the given
+ * prefix string onto the current prefix. Labels will only be
+ * printed if an object within the label's scope is printed.
+ */
+ void pushLabel(const std::string &lbl,
+ const std::string &prefix = " ");
+
+ /**
+ * Pop a label off the label stack.
+ */
+ void popLabel();
+
+ /**
+ * Print all of the pending unprinted labels on the
+ * stack. Called by printObj(), so normally not called by
+ * users unless bypassing printObj().
+ */
+ void printLabels();
+
+ /**
+ * Print a Printable object to os, because it matched the
+ * address on a PrintReq.
+ */
+ void printObj(Printable *obj);
};
- /** This packet's sender state. Devices should use dynamic_cast<>
- * to cast to the state appropriate to the sender. */
+ /**
+ * This packet's sender state. Devices should use dynamic_cast<>
+ * to cast to the state appropriate to the sender. The intent of
+ * this variable is to allow a device to attach extra information
+ * to a request. A response packet must return the sender state
+ * that was attached to the original request (even if a new packet
+ * is created).
+ */
SenderState *senderState;
- public:
-
- /** The command field of the packet. */
- MemCmd cmd;
-
- /** Return the string name of the cmd field (for debugging and
- * tracing). */
+ /// Return the string name of the cmd field (for debugging and
+ /// tracing).
const std::string &cmdString() const { return cmd.toString(); }
- /** Return the index of this command. */
+ /// Return the index of this command.
inline int cmdToIndex() const { return cmd.toInt(); }
- public:
-
bool isRead() const { return cmd.isRead(); }
- bool isWrite() const { return cmd.isWrite(); }
+ bool isWrite() const { return cmd.isWrite(); }
+ bool isUpgrade() const { return cmd.isUpgrade(); }
bool isRequest() const { return cmd.isRequest(); }
bool isResponse() const { return cmd.isResponse(); }
- bool needsExclusive() const { return cmd.needsExclusive(); }
+ bool needsExclusive() const { return cmd.needsExclusive(); }
bool needsResponse() const { return cmd.needsResponse(); }
bool isInvalidate() const { return cmd.isInvalidate(); }
bool hasData() const { return cmd.hasData(); }
bool isReadWrite() const { return cmd.isReadWrite(); }
- bool isLocked() const { return cmd.isLocked(); }
-
- void assertMemInhibit() { snoopFlags[MemInhibit] = true; }
- void assertShared() { snoopFlags[Shared] = true; }
- bool memInhibitAsserted() { return snoopFlags[MemInhibit]; }
- bool sharedAsserted() { return snoopFlags[Shared]; }
+ bool isLLSC() const { return cmd.isLLSC(); }
+ bool isError() const { return cmd.isError(); }
+ bool isPrint() const { return cmd.isPrint(); }
+ bool isFlush() const { return cmd.isFlush(); }
+
+ // Snoop flags
+ void assertMemInhibit() { flags.set(MEM_INHIBIT); }
+ bool memInhibitAsserted() { return flags.isSet(MEM_INHIBIT); }
+ void assertShared() { flags.set(SHARED); }
+ bool sharedAsserted() { return flags.isSet(SHARED); }
+
+ // Special control flags
+ void setExpressSnoop() { flags.set(EXPRESS_SNOOP); }
+ bool isExpressSnoop() { return flags.isSet(EXPRESS_SNOOP); }
+ void setSupplyExclusive() { flags.set(SUPPLY_EXCLUSIVE); }
+ void clearSupplyExclusive() { flags.clear(SUPPLY_EXCLUSIVE); }
+ bool isSupplyExclusive() { return flags.isSet(SUPPLY_EXCLUSIVE); }
+ void setSuppressFuncError() { flags.set(SUPPRESS_FUNC_ERROR); }
+ bool suppressFuncError() { return flags.isSet(SUPPRESS_FUNC_ERROR); }
+
+ // Network error conditions... encapsulate them as methods since
+ // their encoding keeps changing (from result field to command
+ // field, etc.)
+ void
+ setBadAddress()
+ {
+ assert(isResponse());
+ cmd = MemCmd::BadAddressError;
+ }
- bool nic_pkt() { panic("Unimplemented"); M5_DUMMY_RETURN }
+ bool hadBadAddress() const { return cmd == MemCmd::BadAddressError; }
+ void copyError(Packet *pkt) { assert(pkt->isError()); cmd = pkt->cmd; }
+
+ bool isSrcValid() const { return src != InvalidPortID; }
+ /// Accessor function to get the source index of the packet.
+ PortID getSrc() const { assert(isSrcValid()); return src; }
+ /// Accessor function to set the source index of the packet.
+ void setSrc(PortID _src) { src = _src; }
+ /// Reset source field, e.g. to retransmit packet on different bus.
+ void clearSrc() { src = InvalidPortID; }
+
+ bool isDestValid() const { return dest != InvalidPortID; }
+ /// Accessor function for the destination index of the packet.
+ PortID getDest() const { assert(isDestValid()); return dest; }
+ /// Accessor function to set the destination index of the packet.
+ void setDest(PortID _dest) { dest = _dest; }
+ /// Reset destination field, e.g. to turn a response into a request again.
+ void clearDest() { dest = InvalidPortID; }
+
+ Addr getAddr() const { assert(flags.isSet(VALID_ADDR)); return addr; }
+ /**
+ * Update the address of this packet mid-transaction. This is used
+ * by the address mapper to change an already set address to a new
+ * one based on the system configuration. It is intended to remap
+ * an existing address, so it asserts that the current address is
+ * valid.
+ */
+ void setAddr(Addr _addr) { assert(flags.isSet(VALID_ADDR)); addr = _addr; }
- /** Possible results of a packet's request. */
- enum Result
- {
- Success,
- BadAddress,
- Nacked,
- Unknown
- };
+ unsigned getSize() const { assert(flags.isSet(VALID_SIZE)); return size; }
+ Addr getOffset(int blkSize) const { return getAddr() & (Addr)(blkSize - 1); }
- /** The result of this packet's request. */
- Result result;
-
- /** Accessor function that returns the source index of the packet. */
- short getSrc() const { assert(srcValid); return src; }
- void setSrc(short _src) { src = _src; srcValid = true; }
- /** Reset source field, e.g. to retransmit packet on different bus. */
- void clearSrc() { srcValid = false; }
-
- /** Accessor function that returns the destination index of
- the packet. */
- short getDest() const { return dest; }
- void setDest(short _dest) { dest = _dest; }
-
- Addr getAddr() const { assert(addrSizeValid); return addr; }
- int getSize() const { assert(addrSizeValid); return size; }
- Addr getOffset(int blkSize) const { return addr & (Addr)(blkSize - 1); }
-
- void addrOverride(Addr newAddr) { assert(addrSizeValid); addr = newAddr; }
- void cmdOverride(MemCmd newCmd) { cmd = newCmd; }
-
- /** Constructor. Note that a Request object must be constructed
- * first, but the Requests's physical address and size fields
- * need not be valid. The command and destination addresses
- * must be supplied. */
- Packet(Request *_req, MemCmd _cmd, short _dest)
- : data(NULL), staticData(false), dynamicData(false), arrayData(false),
- addr(_req->paddr), size(_req->size), dest(_dest),
- addrSizeValid(_req->validPaddr), srcValid(false),
- snoopFlags(0),
- time(curTick),
- req(_req), coherence(NULL), senderState(NULL), cmd(_cmd),
- result(Unknown)
+ /**
+ * It has been determined that the SC packet should successfully update
+ * memory. Therefore, convert this SC packet to a normal write.
+ */
+ void
+ convertScToWrite()
{
+ assert(isLLSC());
+ assert(isWrite());
+ cmd = MemCmd::WriteReq;
}
- /** Alternate constructor if you are trying to create a packet with
- * a request that is for a whole block, not the address from the req.
- * this allows for overriding the size/addr of the req.*/
- Packet(Request *_req, MemCmd _cmd, short _dest, int _blkSize)
- : data(NULL), staticData(false), dynamicData(false), arrayData(false),
- addr(_req->paddr & ~(_blkSize - 1)), size(_blkSize), dest(_dest),
- addrSizeValid(_req->validPaddr), srcValid(false),
- snoopFlags(0),
- time(curTick),
- req(_req), coherence(NULL), senderState(NULL), cmd(_cmd),
- result(Unknown)
+ /**
+ * When ruby is in use, Ruby will monitor the cache line and thus M5
+ * phys memory should treat LL ops as normal reads.
+ */
+ void
+ convertLlToRead()
{
+ assert(isLLSC());
+ assert(isRead());
+ cmd = MemCmd::ReadReq;
}
- /** Alternate constructor for copying a packet. Copy all fields
- * *except* set data allocation as static... even if the original
- * packet's data was dynamic, we don't want to free it when the
- * new packet is deallocated. Note that if original packet used
- * dynamic data, user must guarantee that the new packet's
- * lifetime is less than that of the original packet. */
- Packet(Packet *origPkt)
- : data(NULL), staticData(false), dynamicData(false), arrayData(false),
- addr(origPkt->addr), size(origPkt->size),
- dest(origPkt->dest),
- addrSizeValid(origPkt->addrSizeValid), srcValid(origPkt->srcValid),
- snoopFlags(origPkt->snoopFlags),
- time(curTick),
- req(origPkt->req), coherence(origPkt->coherence),
- senderState(origPkt->senderState), cmd(origPkt->cmd),
- result(origPkt->result)
+ /**
+ * Constructor. Note that a Request object must be constructed
+ * first, but the Requests's physical address and size fields need
+ * not be valid. The command must be supplied.
+ */
+ Packet(Request *_req, MemCmd _cmd)
+ : cmd(_cmd), req(_req), data(NULL),
+ src(InvalidPortID), dest(InvalidPortID),
+ bytesValidStart(0), bytesValidEnd(0),
+ time(curTick()), senderState(NULL)
{
+ if (req->hasPaddr()) {
+ addr = req->getPaddr();
+ flags.set(VALID_ADDR);
+ }
+ if (req->hasSize()) {
+ size = req->getSize();
+ flags.set(VALID_SIZE);
+ }
}
- /** Destructor. */
- ~Packet()
- { if (staticData || dynamicData) deleteData(); }
-
- /** Reinitialize packet address and size from the associated
- * Request object, and reset other fields that may have been
- * modified by a previous transaction. Typically called when a
- * statically allocated Request/Packet pair is reused for
- * multiple transactions. */
- void reinitFromRequest() {
- assert(req->validPaddr);
- snoopFlags = 0;
- addr = req->paddr;
- size = req->size;
- time = req->time;
- addrSizeValid = true;
- result = Unknown;
- if (dynamicData) {
- deleteData();
- dynamicData = false;
- arrayData = false;
+ /**
+ * Alternate constructor if you are trying to create a packet with
+ * a request that is for a whole block, not the address from the
+ * req. this allows for overriding the size/addr of the req.
+ */
+ Packet(Request *_req, MemCmd _cmd, int _blkSize)
+ : cmd(_cmd), req(_req), data(NULL),
+ src(InvalidPortID), dest(InvalidPortID),
+ bytesValidStart(0), bytesValidEnd(0),
+ time(curTick()), senderState(NULL)
+ {
+ if (req->hasPaddr()) {
+ addr = req->getPaddr() & ~(_blkSize - 1);
+ flags.set(VALID_ADDR);
}
+ size = _blkSize;
+ flags.set(VALID_SIZE);
}
/**
- * Take a request packet and modify it in place to be suitable for
- * returning as a response to that request. The source and
- * destination fields are *not* modified, as is appropriate for
- * atomic accesses.
+ * Alternate constructor for copying a packet. Copy all fields
+ * *except* if the original packet's data was dynamic, don't copy
+ * that, as we can't guarantee that the new packet's lifetime is
+ * less than that of the original packet. In this case the new
+ * packet should allocate its own data.
*/
- void makeAtomicResponse()
+ Packet(Packet *pkt, bool clearFlags = false)
+ : cmd(pkt->cmd), req(pkt->req),
+ data(pkt->flags.isSet(STATIC_DATA) ? pkt->data : NULL),
+ addr(pkt->addr), size(pkt->size), src(pkt->src), dest(pkt->dest),
+ bytesValidStart(pkt->bytesValidStart), bytesValidEnd(pkt->bytesValidEnd),
+ time(curTick()), senderState(pkt->senderState)
{
- assert(needsResponse());
- assert(isRequest());
- assert(result == Unknown);
- cmd = cmd.responseCommand();
- result = Success;
+ if (!clearFlags)
+ flags.set(pkt->flags & COPY_FLAGS);
+
+ flags.set(pkt->flags & (VALID_ADDR|VALID_SIZE));
+ flags.set(pkt->flags & STATIC_DATA);
+
}
/**
- * Perform the additional work required for timing responses above
- * and beyond atomic responses; i.e., change the destination to
- * point back to the requester and clear the source field.
+ * clean up packet variables
*/
- void convertAtomicToTimingResponse()
+ ~Packet()
{
- dest = src;
- srcValid = false;
+ // If this is a request packet for which there's no response,
+ // delete the request object here, since the requester will
+ // never get the chance.
+ if (req && isRequest() && !needsResponse())
+ delete req;
+ deleteData();
}
/**
- * Take a request packet and modify it in place to be suitable for
- * returning as a response to a timing request.
+ * Reinitialize packet address and size from the associated
+ * Request object, and reset other fields that may have been
+ * modified by a previous transaction. Typically called when a
+ * statically allocated Request/Packet pair is reused for multiple
+ * transactions.
*/
- void makeTimingResponse()
+ void
+ reinitFromRequest()
{
- makeAtomicResponse();
- convertAtomicToTimingResponse();
+ assert(req->hasPaddr());
+ flags = 0;
+ addr = req->getPaddr();
+ size = req->getSize();
+ time = req->time();
+
+ flags.set(VALID_ADDR|VALID_SIZE);
+ deleteData();
}
/**
- * Take a request packet that has been returned as NACKED and
- * modify it so that it can be sent out again. Only packets that
- * need a response can be NACKED, so verify that that is true.
+ * Take a request packet and modify it in place to be suitable for
+ * returning as a response to that request. The source field is
+ * turned into the destination, and subsequently cleared. Note
+ * that the latter is not necessary for atomic requests, but
+ * causes no harm as neither field is valid.
*/
void
- reinitNacked()
+ makeResponse()
{
- assert(needsResponse() && result == Nacked);
- dest = Broadcast;
- result = Unknown;
+ assert(needsResponse());
+ assert(isRequest());
+ origCmd = cmd;
+ cmd = cmd.responseCommand();
+
+ // responses are never express, even if the snoop that
+ // triggered them was
+ flags.clear(EXPRESS_SNOOP);
+
+ dest = src;
+ clearSrc();
+ }
+
+ void
+ makeAtomicResponse()
+ {
+ makeResponse();
+ }
+
+ void
+ makeTimingResponse()
+ {
+ makeResponse();
+ }
+
+ void
+ setFunctionalResponseStatus(bool success)
+ {
+ if (!success) {
+ if (isWrite()) {
+ cmd = MemCmd::FunctionalWriteError;
+ } else {
+ cmd = MemCmd::FunctionalReadError;
+ }
+ }
+ }
+
+ void
+ setSize(unsigned size)
+ {
+ assert(!flags.isSet(VALID_SIZE));
+
+ this->size = size;
+ flags.set(VALID_SIZE);
}
void
dataStatic(T *p)
{
- if(dynamicData)
- dynamicData = false;
+ assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA));
data = (PacketDataPtr)p;
- staticData = true;
+ flags.set(STATIC_DATA);
}
/**
void
dataDynamicArray(T *p)
{
- assert(!staticData && !dynamicData);
+ assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA));
data = (PacketDataPtr)p;
- dynamicData = true;
- arrayData = true;
+ flags.set(DYNAMIC_DATA|ARRAY_DATA);
}
/**
void
dataDynamic(T *p)
{
- assert(!staticData && !dynamicData);
+ assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA));
data = (PacketDataPtr)p;
- dynamicData = true;
- arrayData = false;
+ flags.set(DYNAMIC_DATA);
}
- /** get a pointer to the data ptr. */
+ /**
+ * get a pointer to the data ptr.
+ */
template <typename T>
T*
- getPtr()
+ getPtr(bool null_ok = false)
{
- assert(staticData || dynamicData);
+ assert(null_ok || flags.isSet(STATIC_DATA|DYNAMIC_DATA));
return (T*)data;
}
- /** return the value of what is pointed to in the packet. */
+ /**
+ * return the value of what is pointed to in the packet.
+ */
template <typename T>
T get();
- /** set the value in the data pointer to v. */
+ /**
+ * set the value in the data pointer to v.
+ */
template <typename T>
void set(T v);
/**
* Copy data into the packet from the provided pointer.
*/
- void setData(uint8_t *p)
+ void
+ setData(uint8_t *p)
{
- std::memcpy(getPtr<uint8_t>(), p, getSize());
+ if (p != getPtr<uint8_t>())
+ std::memcpy(getPtr<uint8_t>(), p, getSize());
}
/**
* Copy data into the packet from the provided block pointer,
* which is aligned to the given block size.
*/
- void setDataFromBlock(uint8_t *blk_data, int blkSize)
+ void
+ setDataFromBlock(uint8_t *blk_data, int blkSize)
{
setData(blk_data + getOffset(blkSize));
}
* Copy data from the packet to the provided block pointer, which
* is aligned to the given block size.
*/
- void writeData(uint8_t *p)
+ void
+ writeData(uint8_t *p)
{
std::memcpy(p, getPtr<uint8_t>(), getSize());
}
/**
* Copy data from the packet to the memory at the provided pointer.
*/
- void writeDataToBlock(uint8_t *blk_data, int blkSize)
+ void
+ writeDataToBlock(uint8_t *blk_data, int blkSize)
{
writeData(blk_data + getOffset(blkSize));
}
* delete the data pointed to in the data pointer. Ok to call to
* matter how data was allocted.
*/
- void deleteData();
+ void
+ deleteData()
+ {
+ if (flags.isSet(ARRAY_DATA))
+ delete [] data;
+ else if (flags.isSet(DYNAMIC_DATA))
+ delete data;
+
+ flags.clear(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA);
+ data = NULL;
+ }
/** If there isn't data in the packet, allocate some. */
- void allocate();
+ void
+ allocate()
+ {
+ if (data) {
+ assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
+ return;
+ }
- /** Do the packet modify the same addresses. */
- bool intersect(PacketPtr p);
+ assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
+ flags.set(DYNAMIC_DATA|ARRAY_DATA);
+ data = new uint8_t[getSize()];
+ }
/**
* Check a functional request against a memory value represented
* value. If the functional request is a write, it may update the
* memory value.
*/
- bool checkFunctional(Addr base, int size, uint8_t *data);
+ bool checkFunctional(Printable *obj, Addr base, int size, uint8_t *data);
/**
* Check a functional request against a memory value stored in
* another packet (i.e. an in-transit request or response).
*/
- bool checkFunctional(PacketPtr otherPkt) {
- return (otherPkt->hasData() &&
- checkFunctional(otherPkt->getAddr(), otherPkt->getSize(),
- otherPkt->getPtr<uint8_t>()));
+ bool
+ checkFunctional(PacketPtr other)
+ {
+ uint8_t *data = other->hasData() ? other->getPtr<uint8_t>() : NULL;
+ return checkFunctional(other, other->getAddr(), other->getSize(),
+ data);
}
-};
-
+ /**
+ * Push label for PrintReq (safe to call unconditionally).
+ */
+ void
+ pushLabel(const std::string &lbl)
+ {
+ if (isPrint())
+ safe_cast<PrintReqState*>(senderState)->pushLabel(lbl);
+ }
-/** Temporary for backwards compatibility.
- */
-inline
-bool fixPacket(PacketPtr func, PacketPtr timing) {
- return !func->checkFunctional(timing);
-}
-
-/** This function is a wrapper for the fixPacket field that toggles
- * the hasData bit it is used when a response is waiting in the
- * caches, but hasn't been marked as a response yet (so the fixPacket
- * needs to get the correct value for the hasData)
- */
-bool fixDelayedResponsePacket(PacketPtr func, PacketPtr timing);
+ /**
+ * Pop label for PrintReq (safe to call unconditionally).
+ */
+ void
+ popLabel()
+ {
+ if (isPrint())
+ safe_cast<PrintReqState*>(senderState)->popLabel();
+ }
-std::ostream & operator<<(std::ostream &o, const Packet &p);
+ void print(std::ostream &o, int verbosity = 0,
+ const std::string &prefix = "") const;
+};
#endif //__MEM_PACKET_HH
projects / gem5.git / blobdiff