Copyright (C) Intel Corp. 2006. All Rights Reserved.
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
develop this 3D driver.
-
+
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
-
+
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial
portions of the Software.
-
+
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+
**********************************************************************/
/*
* Authors:
# define GEN4_3DPRIM_TOPOLOGY_TYPE_SHIFT 10
# define GEN4_3DPRIM_VERTEXBUFFER_ACCESS_SEQUENTIAL (0 << 15)
# define GEN4_3DPRIM_VERTEXBUFFER_ACCESS_RANDOM (1 << 15)
+# define GEN7_3DPRIM_INDIRECT_PARAMETER_ENABLE (1 << 10)
/* DW1 */
# define GEN7_3DPRIM_VERTEXBUFFER_ACCESS_SEQUENTIAL (0 << 8)
# define GEN7_3DPRIM_VERTEXBUFFER_ACCESS_RANDOM (1 << 8)
SHADER_OPCODE_TXS,
FS_OPCODE_TXB,
SHADER_OPCODE_TXF_MS,
+ SHADER_OPCODE_TXF_MCS,
SHADER_OPCODE_LOD,
SHADER_OPCODE_TG4,
SHADER_OPCODE_TG4_OFFSET,
SHADER_OPCODE_GEN4_SCRATCH_READ,
SHADER_OPCODE_GEN4_SCRATCH_WRITE,
+ SHADER_OPCODE_GEN7_SCRATCH_READ,
FS_OPCODE_DDX,
FS_OPCODE_DDY,
FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN7,
FS_OPCODE_MOV_DISPATCH_TO_FLAGS,
FS_OPCODE_DISCARD_JUMP,
+ FS_OPCODE_SET_OMASK,
+ FS_OPCODE_SET_SAMPLE_ID,
FS_OPCODE_SET_SIMD4X2_OFFSET,
FS_OPCODE_PACK_HALF_2x16_SPLIT,
FS_OPCODE_UNPACK_HALF_2x16_SPLIT_X,
GS_OPCODE_SET_CHANNEL_MASKS,
};
+enum brw_urb_write_flags {
+ BRW_URB_WRITE_NO_FLAGS = 0,
+
+ /**
+ * Causes a new URB entry to be allocated, and its address stored in the
+ * destination register (gen < 7).
+ */
+ BRW_URB_WRITE_ALLOCATE = 0x1,
+
+ /**
+ * Causes the current URB entry to be deallocated (gen < 7).
+ */
+ BRW_URB_WRITE_UNUSED = 0x2,
+
+ /**
+ * Causes the thread to terminate.
+ */
+ BRW_URB_WRITE_EOT = 0x4,
+
+ /**
+ * Indicates that the given URB entry is complete, and may be sent further
+ * down the 3D pipeline (gen < 7).
+ */
+ BRW_URB_WRITE_COMPLETE = 0x8,
+
+ /**
+ * Indicates that an additional offset (which may be different for the two
+ * vec4 slots) is stored in the message header (gen == 7).
+ */
+ BRW_URB_WRITE_PER_SLOT_OFFSET = 0x10,
+
+ /**
+ * Indicates that the channel masks in the URB_WRITE message header should
+ * not be overridden to 0xff (gen == 7).
+ */
+ BRW_URB_WRITE_USE_CHANNEL_MASKS = 0x20,
+
+ /**
+ * Indicates that the data should be sent to the URB using the
+ * URB_WRITE_OWORD message rather than URB_WRITE_HWORD (gen == 7). This
+ * causes offsets to be interpreted as multiples of an OWORD instead of an
+ * HWORD, and only allows one OWORD to be written.
+ */
+ BRW_URB_WRITE_OWORD = 0x40,
+
+ /**
+ * Convenient combination of flags: end the thread while simultaneously
+ * marking the given URB entry as complete.
+ */
+ BRW_URB_WRITE_EOT_COMPLETE = BRW_URB_WRITE_EOT | BRW_URB_WRITE_COMPLETE,
+
+ /**
+ * Convenient combination of flags: mark the given URB entry as complete
+ * and simultaneously allocate a new one.
+ */
+ BRW_URB_WRITE_ALLOCATE_COMPLETE =
+ BRW_URB_WRITE_ALLOCATE | BRW_URB_WRITE_COMPLETE,
+};
+
+#ifdef __cplusplus
+/**
+ * Allow brw_urb_write_flags enums to be ORed together.
+ */
+inline brw_urb_write_flags
+operator|(brw_urb_write_flags x, brw_urb_write_flags y)
+{
+ return static_cast<brw_urb_write_flags>(static_cast<int>(x) |
+ static_cast<int>(y));
+}
+#endif
+
#define BRW_PREDICATE_NONE 0
#define BRW_PREDICATE_NORMAL 1
#define BRW_PREDICATE_ALIGN1_ANYV 2
#define BRW_MESSAGE_REGISTER_FILE 2
#define BRW_IMMEDIATE_VALUE 3
-#define BRW_REGISTER_TYPE_UD 0
-#define BRW_REGISTER_TYPE_D 1
-#define BRW_REGISTER_TYPE_UW 2
-#define BRW_REGISTER_TYPE_W 3
-#define BRW_REGISTER_TYPE_UB 4
-#define BRW_REGISTER_TYPE_B 5
-#define BRW_REGISTER_TYPE_VF 5 /* packed float vector, immediates only? */
-#define BRW_REGISTER_TYPE_HF 6
-#define BRW_REGISTER_TYPE_V 6 /* packed int vector, immediates only, uword dest only */
-#define BRW_REGISTER_TYPE_F 7
+#define BRW_HW_REG_TYPE_UD 0
+#define BRW_HW_REG_TYPE_D 1
+#define BRW_HW_REG_TYPE_UW 2
+#define BRW_HW_REG_TYPE_W 3
+#define BRW_HW_REG_TYPE_F 7
+
+#define BRW_HW_REG_NON_IMM_TYPE_UB 4
+#define BRW_HW_REG_NON_IMM_TYPE_B 5
+
+#define BRW_HW_REG_IMM_TYPE_UV 4 /* Gen6+ packed unsigned immediate vector */
+#define BRW_HW_REG_IMM_TYPE_VF 5 /* packed float immediate vector */
+#define BRW_HW_REG_IMM_TYPE_V 6 /* packed int imm. vector; uword dest only */
/* SNB adds 3-src instructions (MAD and LRP) that only operate on floats, so
* the types were implied. IVB adds BFE and BFI2 that operate on doublewords
#define GEN7_DATAPORT_DC_BYTE_SCATTERED_WRITE 12
#define GEN7_DATAPORT_DC_UNTYPED_SURFACE_WRITE 13
+#define GEN7_DATAPORT_SCRATCH_READ ((1 << 18) | \
+ (0 << 17))
+#define GEN7_DATAPORT_SCRATCH_WRITE ((1 << 18) | \
+ (1 << 17))
+#define GEN7_DATAPORT_SCRATCH_NUM_REGS_SHIFT 12
+
/* HSW */
#define HSW_DATAPORT_DC_PORT0_OWORD_BLOCK_READ 0
#define HSW_DATAPORT_DC_PORT0_UNALIGNED_OWORD_BLOCK_READ 1
projects / mesa.git / blobdiff