#include "brw_defines.h"
#include "main/fbobject.h"
+#include "main/glformats.h"
/* Constant single cliprect for framebuffer object or DRI2 drawing */
static void upload_drawing_rect(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &intel->ctx;
+ struct gl_context *ctx = &brw->ctx;
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_DRAWING_RECTANGLE << 16 | (4 - 2));
*/
static void upload_binding_table_pointers(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(6);
OUT_BATCH(_3DSTATE_BINDING_TABLE_POINTERS << 16 | (6 - 2));
OUT_BATCH(brw->vs.bind_bo_offset);
*/
static void upload_gen6_binding_table_pointers(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_BINDING_TABLE_POINTERS << 16 |
GEN6_BINDING_TABLE_MODIFY_VS |
*/
static void upload_pipelined_state_pointers(struct brw_context *brw )
{
- struct intel_context *intel = &brw->intel;
-
- if (intel->gen == 5) {
+ if (brw->gen == 5) {
/* Need to flush before changing clip max threads for errata. */
BEGIN_BATCH(1);
OUT_BATCH(MI_FLUSH);
BEGIN_BATCH(7);
OUT_BATCH(_3DSTATE_PIPELINED_POINTERS << 16 | (7 - 2));
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->vs.state_offset);
if (brw->gs.prog_active)
- OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->gs.state_offset | 1);
else
OUT_BATCH(0);
- OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->clip.state_offset | 1);
- OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->sf.state_offset);
- OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->wm.state_offset);
- OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
brw->cc.state_offset);
ADVANCE_BATCH();
uint32_t
brw_depthbuffer_format(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &intel->ctx;
+ struct gl_context *ctx = &brw->ctx;
struct gl_framebuffer *fb = ctx->DrawBuffer;
struct intel_renderbuffer *drb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
struct intel_renderbuffer *srb;
case MESA_FORMAT_Z32_FLOAT:
return BRW_DEPTHFORMAT_D32_FLOAT;
case MESA_FORMAT_X8_Z24:
- if (intel->gen >= 6) {
+ if (brw->gen >= 6) {
return BRW_DEPTHFORMAT_D24_UNORM_X8_UINT;
} else {
/* Use D24_UNORM_S8, not D24_UNORM_X8.
*/
void
brw_get_depthstencil_tile_masks(struct intel_mipmap_tree *depth_mt,
+ uint32_t depth_level,
+ uint32_t depth_layer,
struct intel_mipmap_tree *stencil_mt,
uint32_t *out_tile_mask_x,
uint32_t *out_tile_mask_y)
intel_region_get_tile_masks(depth_mt->region,
&tile_mask_x, &tile_mask_y, false);
- struct intel_mipmap_tree *hiz_mt = depth_mt->hiz_mt;
- if (hiz_mt) {
+ if (intel_miptree_slice_has_hiz(depth_mt, depth_level, depth_layer)) {
uint32_t hiz_tile_mask_x, hiz_tile_mask_y;
- intel_region_get_tile_masks(hiz_mt->region,
+ intel_region_get_tile_masks(depth_mt->hiz_mt->region,
&hiz_tile_mask_x, &hiz_tile_mask_y, false);
/* Each HiZ row represents 2 rows of pixels */
*out_tile_mask_y = tile_mask_y;
}
+static struct intel_mipmap_tree *
+get_stencil_miptree(struct intel_renderbuffer *irb)
+{
+ if (!irb)
+ return NULL;
+ if (irb->mt->stencil_mt)
+ return irb->mt->stencil_mt;
+ return irb->mt;
+}
+
void
-brw_workaround_depthstencil_alignment(struct brw_context *brw)
+brw_workaround_depthstencil_alignment(struct brw_context *brw,
+ GLbitfield clear_mask)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &intel->ctx;
+ struct gl_context *ctx = &brw->ctx;
struct gl_framebuffer *fb = ctx->DrawBuffer;
bool rebase_depth = false;
bool rebase_stencil = false;
struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
struct intel_mipmap_tree *depth_mt = NULL;
- struct intel_mipmap_tree *stencil_mt = NULL;
+ struct intel_mipmap_tree *stencil_mt = get_stencil_miptree(stencil_irb);
+ uint32_t tile_x = 0, tile_y = 0, stencil_tile_x = 0, stencil_tile_y = 0;
+ uint32_t stencil_draw_x = 0, stencil_draw_y = 0;
+ bool invalidate_depth = clear_mask & BUFFER_BIT_DEPTH;
+ bool invalidate_stencil = clear_mask & BUFFER_BIT_STENCIL;
if (depth_irb)
depth_mt = depth_irb->mt;
+
+ /* Initialize brw->depthstencil to 'nop' workaround state.
+ */
+ brw->depthstencil.tile_x = 0;
+ brw->depthstencil.tile_y = 0;
+ brw->depthstencil.depth_offset = 0;
+ brw->depthstencil.stencil_offset = 0;
+ brw->depthstencil.hiz_offset = 0;
+ brw->depthstencil.depth_mt = NULL;
+ brw->depthstencil.stencil_mt = NULL;
+ if (depth_irb)
+ brw->depthstencil.depth_mt = depth_mt;
if (stencil_irb)
- stencil_mt = stencil_irb->mt;
+ brw->depthstencil.stencil_mt = get_stencil_miptree(stencil_irb);
+
+ /* Gen7+ doesn't require the workarounds, since we always program the
+ * surface state at the start of the whole surface.
+ */
+ if (brw->gen >= 7)
+ return;
+
+ /* Check if depth buffer is in depth/stencil format. If so, then it's only
+ * safe to invalidate it if we're also clearing stencil, and both depth_irb
+ * and stencil_irb point to the same miptree.
+ *
+ * Note: it's not sufficient to check for the case where
+ * _mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL,
+ * because this fails to catch depth/stencil buffers on hardware that uses
+ * separate stencil. To catch that case, we check whether
+ * depth_mt->stencil_mt is non-NULL.
+ */
+ if (depth_irb && invalidate_depth &&
+ (_mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL ||
+ depth_mt->stencil_mt)) {
+ invalidate_depth = invalidate_stencil && depth_irb && stencil_irb
+ && depth_irb->mt == stencil_irb->mt;
+ }
uint32_t tile_mask_x, tile_mask_y;
- brw_get_depthstencil_tile_masks(depth_mt, stencil_mt,
+ brw_get_depthstencil_tile_masks(depth_mt,
+ depth_mt ? depth_irb->mt_level : 0,
+ depth_mt ? depth_irb->mt_layer : 0,
+ stencil_mt,
&tile_mask_x, &tile_mask_y);
if (depth_irb) {
- uint32_t depth_tile_x = depth_irb->draw_x & tile_mask_x;
- uint32_t depth_tile_y = depth_irb->draw_y & tile_mask_y;
+ tile_x = depth_irb->draw_x & tile_mask_x;
+ tile_y = depth_irb->draw_y & tile_mask_y;
- /* The low 3 bits of x and y tile offset are ignored by the hardware.
- * Rebase if they're set, so that we can actually render to the buffer.
+ /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
+ * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
+ * Coordinate Offset X/Y":
+ *
+ * "The 3 LSBs of both offsets must be zero to ensure correct
+ * alignment"
*/
- if (depth_tile_x & 7 || depth_tile_y & 7)
+ if (tile_x & 7 || tile_y & 7)
rebase_depth = true;
/* We didn't even have intra-tile offsets before g45. */
- if (intel->gen == 4 && !intel->is_g4x) {
- if (depth_tile_x || depth_tile_y)
+ if (brw->gen == 4 && !brw->is_g4x) {
+ if (tile_x || tile_y)
rebase_depth = true;
}
- if (stencil_irb) {
- int stencil_tile_x = stencil_irb->draw_x & tile_mask_x;
- int stencil_tile_y = stencil_irb->draw_y & tile_mask_y;
+ if (rebase_depth) {
+ perf_debug("HW workaround: blitting depth level %d to a temporary "
+ "to fix alignment (depth tile offset %d,%d)\n",
+ depth_irb->mt_level, tile_x, tile_y);
+ intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);
+ /* In the case of stencil_irb being the same packed depth/stencil
+ * texture but not the same rb, make it point at our rebased mt, too.
+ */
+ if (stencil_irb &&
+ stencil_irb != depth_irb &&
+ stencil_irb->mt == depth_mt) {
+ intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
+ intel_renderbuffer_set_draw_offset(stencil_irb);
+ }
+
+ stencil_mt = get_stencil_miptree(stencil_irb);
- /* If the two don't match up, then we need to move them to a
- * temporary so that the x/y draw offsets will end up being 0.
+ tile_x = depth_irb->draw_x & tile_mask_x;
+ tile_y = depth_irb->draw_y & tile_mask_y;
+ }
+
+ if (stencil_irb) {
+ stencil_mt = get_stencil_miptree(stencil_irb);
+ intel_miptree_get_image_offset(stencil_mt,
+ stencil_irb->mt_level,
+ stencil_irb->mt_layer,
+ &stencil_draw_x, &stencil_draw_y);
+ int stencil_tile_x = stencil_draw_x & tile_mask_x;
+ int stencil_tile_y = stencil_draw_y & tile_mask_y;
+
+ /* If stencil doesn't match depth, then we'll need to rebase stencil
+ * as well. (if we hadn't decided to rebase stencil before, the
+ * post-stencil depth test will also rebase depth to try to match it
+ * up).
*/
- if (depth_tile_x != stencil_tile_x ||
- depth_tile_y != stencil_tile_y) {
- rebase_depth = true;
+ if (tile_x != stencil_tile_x ||
+ tile_y != stencil_tile_y) {
rebase_stencil = true;
}
}
/* If we have (just) stencil, check it for ignored low bits as well */
if (stencil_irb) {
- uint32_t stencil_tile_x = stencil_irb->draw_x & tile_mask_x;
- uint32_t stencil_tile_y = stencil_irb->draw_y & tile_mask_y;
+ intel_miptree_get_image_offset(stencil_mt,
+ stencil_irb->mt_level,
+ stencil_irb->mt_layer,
+ &stencil_draw_x, &stencil_draw_y);
+ stencil_tile_x = stencil_draw_x & tile_mask_x;
+ stencil_tile_y = stencil_draw_y & tile_mask_y;
if (stencil_tile_x & 7 || stencil_tile_y & 7)
rebase_stencil = true;
- if (intel->gen == 4 && !intel->is_g4x) {
+ if (brw->gen == 4 && !brw->is_g4x) {
if (stencil_tile_x || stencil_tile_y)
rebase_stencil = true;
}
}
- if (rebase_depth) {
- intel_renderbuffer_move_to_temp(intel, depth_irb);
-
- if (stencil_irb && stencil_irb->mt == depth_mt) {
- intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
- intel_renderbuffer_set_draw_offset(stencil_irb);
- }
- }
if (rebase_stencil) {
- intel_renderbuffer_move_to_temp(intel, stencil_irb);
+ perf_debug("HW workaround: blitting stencil level %d to a temporary "
+ "to fix alignment (stencil tile offset %d,%d)\n",
+ stencil_irb->mt_level, stencil_tile_x, stencil_tile_y);
+
+ intel_renderbuffer_move_to_temp(brw, stencil_irb, invalidate_stencil);
+ stencil_mt = get_stencil_miptree(stencil_irb);
- if (depth_irb && depth_irb->mt == stencil_mt) {
+ intel_miptree_get_image_offset(stencil_mt,
+ stencil_irb->mt_level,
+ stencil_irb->mt_layer,
+ &stencil_draw_x, &stencil_draw_y);
+ stencil_tile_x = stencil_draw_x & tile_mask_x;
+ stencil_tile_y = stencil_draw_y & tile_mask_y;
+
+ if (depth_irb && depth_irb->mt == stencil_irb->mt) {
intel_miptree_reference(&depth_irb->mt, stencil_irb->mt);
intel_renderbuffer_set_draw_offset(depth_irb);
+ } else if (depth_irb && !rebase_depth) {
+ if (tile_x != stencil_tile_x ||
+ tile_y != stencil_tile_y) {
+ perf_debug("HW workaround: blitting depth level %d to a temporary "
+ "to match stencil level %d alignment (depth tile offset "
+ "%d,%d, stencil offset %d,%d)\n",
+ depth_irb->mt_level,
+ stencil_irb->mt_level,
+ tile_x, tile_y,
+ stencil_tile_x, stencil_tile_y);
+
+ intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);
+
+ tile_x = depth_irb->draw_x & tile_mask_x;
+ tile_y = depth_irb->draw_y & tile_mask_y;
+
+ if (stencil_irb && stencil_irb->mt == depth_mt) {
+ intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
+ intel_renderbuffer_set_draw_offset(stencil_irb);
+ }
+
+ WARN_ONCE(stencil_tile_x != tile_x ||
+ stencil_tile_y != tile_y,
+ "Rebased stencil tile offset (%d,%d) doesn't match depth "
+ "tile offset (%d,%d).\n",
+ stencil_tile_x, stencil_tile_y,
+ tile_x, tile_y);
+ }
}
}
-}
-static void emit_depthbuffer(struct brw_context *brw)
-{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &intel->ctx;
- struct gl_framebuffer *fb = ctx->DrawBuffer;
- /* _NEW_BUFFERS */
- struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
- struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
- struct intel_mipmap_tree *depth_mt = NULL;
- struct intel_mipmap_tree *stencil_mt = NULL;
- struct intel_region *hiz_region = NULL;
- unsigned int len;
- bool separate_stencil = false;
-
- if (depth_irb){
- depth_mt = depth_irb->mt;
- if (depth_mt &&
- depth_mt->hiz_mt) {
- hiz_region = depth_irb->mt->hiz_mt->region;
- }
+ if (!depth_irb) {
+ tile_x = stencil_tile_x;
+ tile_y = stencil_tile_y;
}
- /* 3DSTATE_DEPTH_BUFFER, 3DSTATE_STENCIL_BUFFER are both
- * non-pipelined state that will need the PIPE_CONTROL workaround.
+ /* While we just tried to get everything aligned, we may have failed to do
+ * so in the case of rendering to array or 3D textures, where nonzero faces
+ * will still have an offset post-rebase. At least give an informative
+ * warning.
*/
- if (intel->gen == 6) {
- intel_emit_post_sync_nonzero_flush(intel);
- intel_emit_depth_stall_flushes(intel);
- }
+ WARN_ONCE((tile_x & 7) || (tile_y & 7),
+ "Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
+ "Truncating offset, bad rendering may occur.\n");
+ tile_x &= ~7;
+ tile_y &= ~7;
- /* Find the real separate stencil mt if present. */
+ /* Now, after rebasing, save off the new dephtstencil state so the hardware
+ * packets can just dereference that without re-calculating tile offsets.
+ */
+ brw->depthstencil.tile_x = tile_x;
+ brw->depthstencil.tile_y = tile_y;
+ if (depth_irb) {
+ depth_mt = depth_irb->mt;
+ brw->depthstencil.depth_mt = depth_mt;
+ brw->depthstencil.depth_offset =
+ intel_region_get_aligned_offset(depth_mt->region,
+ depth_irb->draw_x & ~tile_mask_x,
+ depth_irb->draw_y & ~tile_mask_y,
+ false);
+ if (intel_renderbuffer_has_hiz(depth_irb)) {
+ brw->depthstencil.hiz_offset =
+ intel_region_get_aligned_offset(depth_mt->region,
+ depth_irb->draw_x & ~tile_mask_x,
+ (depth_irb->draw_y & ~tile_mask_y) /
+ 2,
+ false);
+ }
+ }
if (stencil_irb) {
- stencil_mt = stencil_irb->mt;
- if (stencil_mt->stencil_mt)
- stencil_mt = stencil_mt->stencil_mt;
+ stencil_mt = get_stencil_miptree(stencil_irb);
+ brw->depthstencil.stencil_mt = stencil_mt;
if (stencil_mt->format == MESA_FORMAT_S8) {
- separate_stencil = true;
+ /* Note: we can't compute the stencil offset using
+ * intel_region_get_aligned_offset(), because stencil_region claims
+ * that the region is untiled even though it's W tiled.
+ */
+ brw->depthstencil.stencil_offset =
+ (stencil_draw_y & ~tile_mask_y) * stencil_mt->region->pitch +
+ (stencil_draw_x & ~tile_mask_x) * 64;
}
}
+}
- uint32_t tile_mask_x, tile_mask_y;
- brw_get_depthstencil_tile_masks(depth_mt, stencil_mt,
- &tile_mask_x, &tile_mask_y);
+void
+brw_emit_depthbuffer(struct brw_context *brw)
+{
+ struct gl_context *ctx = &brw->ctx;
+ struct gl_framebuffer *fb = ctx->DrawBuffer;
+ /* _NEW_BUFFERS */
+ struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
+ struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
+ struct intel_mipmap_tree *depth_mt = brw->depthstencil.depth_mt;
+ struct intel_mipmap_tree *stencil_mt = brw->depthstencil.stencil_mt;
+ uint32_t tile_x = brw->depthstencil.tile_x;
+ uint32_t tile_y = brw->depthstencil.tile_y;
+ bool hiz = depth_irb && intel_renderbuffer_has_hiz(depth_irb);
+ bool separate_stencil = false;
+ uint32_t depth_surface_type = BRW_SURFACE_NULL;
+ uint32_t depthbuffer_format = BRW_DEPTHFORMAT_D32_FLOAT;
+ uint32_t depth_offset = 0;
+ uint32_t width = 1, height = 1;
- /* The intra-tile offsets should already have been forced into agreement by
- * gen7_workaround_depthstencil_alignment().
- */
- uint32_t tile_x = 0, tile_y = 0;
- if (depth_mt) {
- tile_x = depth_irb->draw_x & tile_mask_x;
- tile_y = depth_irb->draw_y & tile_mask_y;
+ if (stencil_mt) {
+ separate_stencil = stencil_mt->format == MESA_FORMAT_S8;
- if (stencil_mt) {
- assert((stencil_irb->draw_x & tile_mask_x) == tile_x);
- assert((stencil_irb->draw_y & tile_mask_y) == tile_y);
- }
- } else if (stencil_mt) {
- tile_x = stencil_irb->draw_x & tile_mask_x;
- tile_y = stencil_irb->draw_y & tile_mask_y;
+ /* Gen7 supports only separate stencil */
+ assert(separate_stencil || brw->gen < 7);
}
- /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
- * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
- * Coordinate Offset X/Y":
- *
- * "The 3 LSBs of both offsets must be zero to ensure correct
- * alignment"
- *
- * This should already have been corrected by
- * gen6_workaround_depthstencil_alignment.
- */
- WARN_ONCE((tile_x & 7) || (tile_y & 7),
- "Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
- "Truncating offset, bad rendering may occur.\n");
- tile_x &= ~7;
- tile_y &= ~7;
-
/* If there's a packed depth/stencil bound to stencil only, we need to
* emit the packed depth/stencil buffer packet.
*/
- if (!depth_irb && stencil_irb && !separate_stencil)
+ if (!depth_irb && stencil_irb && !separate_stencil) {
depth_irb = stencil_irb;
+ depth_mt = stencil_mt;
+ }
- if (intel->gen >= 6)
- len = 7;
- else if (intel->is_g4x || intel->gen == 5)
- len = 6;
- else
- len = 5;
-
- if (!depth_irb && !separate_stencil) {
- BEGIN_BATCH(len);
- OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
- OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
- (BRW_SURFACE_NULL << 29));
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
-
- if (intel->is_g4x || intel->gen >= 5)
- OUT_BATCH(0);
+ if (depth_irb && depth_mt) {
+ /* When 3DSTATE_DEPTH_BUFFER.Separate_Stencil_Enable is set, then
+ * 3DSTATE_DEPTH_BUFFER.Surface_Format is not permitted to be a packed
+ * depthstencil format.
+ *
+ * Gens prior to 7 require that HiZ_Enable and Separate_Stencil_Enable be
+ * set to the same value. Gens after 7 implicitly always set
+ * Separate_Stencil_Enable; software cannot disable it.
+ */
+ if ((brw->gen < 7 && hiz) || brw->gen >= 7) {
+ assert(!_mesa_is_format_packed_depth_stencil(depth_mt->format));
+ }
- if (intel->gen >= 6)
- OUT_BATCH(0);
+ /* Prior to Gen7, if using separate stencil, hiz must be enabled. */
+ assert(brw->gen >= 7 || !separate_stencil || hiz);
- ADVANCE_BATCH();
+ assert(brw->gen < 6 || depth_mt->region->tiling == I915_TILING_Y);
+ assert(!hiz || depth_mt->region->tiling == I915_TILING_Y);
- } else if (!depth_irb && separate_stencil) {
+ depthbuffer_format = brw_depthbuffer_format(brw);
+ depth_surface_type = BRW_SURFACE_2D;
+ depth_offset = brw->depthstencil.depth_offset;
+ width = depth_irb->Base.Base.Width;
+ height = depth_irb->Base.Base.Height;
+ } else if (separate_stencil) {
/*
* There exists a separate stencil buffer but no depth buffer.
*
* 3DSTATE_DEPTH_BUFFER: namely the tile walk, surface type, width, and
* height.
*
- * Enable the hiz bit because it and the separate stencil bit must have
- * the same value. From Section 2.11.5.6.1.1 3DSTATE_DEPTH_BUFFER, Bit
- * 1.21 "Separate Stencil Enable":
- * [DevIL]: If this field is enabled, Hierarchical Depth Buffer
- * Enable must also be enabled.
- *
- * [DevGT]: This field must be set to the same value (enabled or
- * disabled) as Hierarchical Depth Buffer Enable
- *
* The tiled bit must be set. From the Sandybridge PRM, Volume 2, Part 1,
* Section 7.5.5.1.1 3DSTATE_DEPTH_BUFFER, Bit 1.27 Tiled Surface:
* [DevGT+]: This field must be set to TRUE.
*/
- assert(intel->has_separate_stencil);
-
- BEGIN_BATCH(len);
- OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
- OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
- (1 << 21) | /* separate stencil enable */
- (1 << 22) | /* hiz enable */
- (BRW_TILEWALK_YMAJOR << 26) |
- (1 << 27) | /* tiled surface */
- (BRW_SURFACE_2D << 29));
- OUT_BATCH(0);
- OUT_BATCH(((stencil_irb->Base.Base.Width + tile_x - 1) << 6) |
- (stencil_irb->Base.Base.Height + tile_y - 1) << 19);
- OUT_BATCH(0);
+ assert(brw->has_separate_stencil);
- if (intel->is_g4x || intel->gen >= 5)
- OUT_BATCH(tile_x | (tile_y << 16));
- else
- assert(tile_x == 0 && tile_y == 0);
+ depth_surface_type = BRW_SURFACE_2D;
+ width = stencil_irb->Base.Base.Width;
+ height = stencil_irb->Base.Base.Height;
+ }
- if (intel->gen >= 6)
- OUT_BATCH(0);
+ brw->vtbl.emit_depth_stencil_hiz(brw, depth_mt, depth_offset,
+ depthbuffer_format, depth_surface_type,
+ stencil_mt, hiz, separate_stencil,
+ width, height, tile_x, tile_y);
+}
- ADVANCE_BATCH();
+void
+brw_emit_depth_stencil_hiz(struct brw_context *brw,
+ struct intel_mipmap_tree *depth_mt,
+ uint32_t depth_offset, uint32_t depthbuffer_format,
+ uint32_t depth_surface_type,
+ struct intel_mipmap_tree *stencil_mt,
+ bool hiz, bool separate_stencil,
+ uint32_t width, uint32_t height,
+ uint32_t tile_x, uint32_t tile_y)
+{
+ /* Enable the hiz bit if we're doing separate stencil, because it and the
+ * separate stencil bit must have the same value. From Section 2.11.5.6.1.1
+ * 3DSTATE_DEPTH_BUFFER, Bit 1.21 "Separate Stencil Enable":
+ * [DevIL]: If this field is enabled, Hierarchical Depth Buffer
+ * Enable must also be enabled.
+ *
+ * [DevGT]: This field must be set to the same value (enabled or
+ * disabled) as Hierarchical Depth Buffer Enable
+ */
+ bool enable_hiz_ss = hiz || separate_stencil;
- } else {
- struct intel_region *region = depth_irb->mt->region;
- uint32_t offset;
-
- /* If using separate stencil, hiz must be enabled. */
- assert(!separate_stencil || hiz_region);
-
- assert(intel->gen < 6 || region->tiling == I915_TILING_Y);
- assert(!hiz_region || region->tiling == I915_TILING_Y);
-
- offset = intel_region_get_aligned_offset(region,
- depth_irb->draw_x & ~tile_mask_x,
- depth_irb->draw_y & ~tile_mask_y,
- false);
-
- BEGIN_BATCH(len);
- OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
- OUT_BATCH(((region->pitch * region->cpp) - 1) |
- (brw_depthbuffer_format(brw) << 18) |
- ((hiz_region ? 1 : 0) << 21) | /* separate stencil enable */
- ((hiz_region ? 1 : 0) << 22) | /* hiz enable */
- (BRW_TILEWALK_YMAJOR << 26) |
- ((region->tiling != I915_TILING_NONE) << 27) |
- (BRW_SURFACE_2D << 29));
- OUT_RELOC(region->bo,
+
+ /* 3DSTATE_DEPTH_BUFFER, 3DSTATE_STENCIL_BUFFER are both
+ * non-pipelined state that will need the PIPE_CONTROL workaround.
+ */
+ if (brw->gen == 6) {
+ intel_emit_post_sync_nonzero_flush(brw);
+ intel_emit_depth_stall_flushes(brw);
+ }
+
+ unsigned int len;
+ if (brw->gen >= 6)
+ len = 7;
+ else if (brw->is_g4x || brw->gen == 5)
+ len = 6;
+ else
+ len = 5;
+
+ BEGIN_BATCH(len);
+ OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
+ OUT_BATCH((depth_mt ? depth_mt->region->pitch - 1 : 0) |
+ (depthbuffer_format << 18) |
+ ((enable_hiz_ss ? 1 : 0) << 21) | /* separate stencil enable */
+ ((enable_hiz_ss ? 1 : 0) << 22) | /* hiz enable */
+ (BRW_TILEWALK_YMAJOR << 26) |
+ ((depth_mt ? depth_mt->region->tiling != I915_TILING_NONE : 1)
+ << 27) |
+ (depth_surface_type << 29));
+
+ if (depth_mt) {
+ OUT_RELOC(depth_mt->region->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
- offset);
- OUT_BATCH((BRW_SURFACE_MIPMAPLAYOUT_BELOW << 1) |
- (((depth_irb->Base.Base.Width + tile_x) - 1) << 6) |
- (((depth_irb->Base.Base.Height + tile_y) - 1) << 19));
+ depth_offset);
+ } else {
OUT_BATCH(0);
+ }
- if (intel->is_g4x || intel->gen >= 5)
- OUT_BATCH(tile_x | (tile_y << 16));
- else
- assert(tile_x == 0 && tile_y == 0);
+ OUT_BATCH(((width + tile_x - 1) << 6) |
+ ((height + tile_y - 1) << 19));
+ OUT_BATCH(0);
- if (intel->gen >= 6)
- OUT_BATCH(0);
+ if (brw->is_g4x || brw->gen >= 5)
+ OUT_BATCH(tile_x | (tile_y << 16));
+ else
+ assert(tile_x == 0 && tile_y == 0);
- ADVANCE_BATCH();
- }
+ if (brw->gen >= 6)
+ OUT_BATCH(0);
+
+ ADVANCE_BATCH();
- if (hiz_region || separate_stencil) {
+ if (hiz || separate_stencil) {
/*
* In the 3DSTATE_DEPTH_BUFFER batch emitted above, the 'separate
* stencil enable' and 'hiz enable' bits were set. Therefore we must
*/
/* Emit hiz buffer. */
- if (hiz_region) {
- uint32_t hiz_offset =
- intel_region_get_aligned_offset(hiz_region,
- depth_irb->draw_x & ~tile_mask_x,
- (depth_irb->draw_y & ~tile_mask_y) / 2,
- false);
-
+ if (hiz) {
+ struct intel_mipmap_tree *hiz_mt = depth_mt->hiz_mt;
BEGIN_BATCH(3);
OUT_BATCH((_3DSTATE_HIER_DEPTH_BUFFER << 16) | (3 - 2));
- OUT_BATCH(hiz_region->pitch * hiz_region->cpp - 1);
- OUT_RELOC(hiz_region->bo,
+ OUT_BATCH(hiz_mt->region->pitch - 1);
+ OUT_RELOC(hiz_mt->region->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
- hiz_offset);
+ brw->depthstencil.hiz_offset);
ADVANCE_BATCH();
} else {
BEGIN_BATCH(3);
if (separate_stencil) {
struct intel_region *region = stencil_mt->region;
- /* Note: we can't compute the stencil offset using
- * intel_region_get_aligned_offset(), because stencil_region claims
- * that the region is untiled; in fact it's W tiled.
- */
- uint32_t stencil_offset =
- (stencil_irb->draw_y & ~tile_mask_y) * region->pitch +
- (stencil_irb->draw_x & ~tile_mask_x) * 64;
-
BEGIN_BATCH(3);
OUT_BATCH((_3DSTATE_STENCIL_BUFFER << 16) | (3 - 2));
/* The stencil buffer has quirky pitch requirements. From Vol 2a,
* The pitch must be set to 2x the value computed based on width, as
* the stencil buffer is stored with two rows interleaved.
*/
- OUT_BATCH(2 * region->pitch * region->cpp - 1);
+ OUT_BATCH(2 * region->pitch - 1);
OUT_RELOC(region->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
- stencil_offset);
+ brw->depthstencil.stencil_offset);
ADVANCE_BATCH();
} else {
BEGIN_BATCH(3);
* 3DSTATE_CLEAR_PARAMS packet must follow the DEPTH_BUFFER_STATE packet
* when HiZ is enabled and the DEPTH_BUFFER_STATE changes.
*/
- if (intel->gen >= 6 || hiz_region) {
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen >= 6 || hiz) {
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(2);
OUT_BATCH(_3DSTATE_CLEAR_PARAMS << 16 |
GEN5_DEPTH_CLEAR_VALID |
(2 - 2));
- OUT_BATCH(depth_irb ? depth_irb->mt->depth_clear_value : 0);
+ OUT_BATCH(depth_mt ? depth_mt->depth_clear_value : 0);
ADVANCE_BATCH();
}
}
.brw = BRW_NEW_BATCH,
.cache = 0,
},
- .emit = emit_depthbuffer,
+ .emit = brw_emit_depthbuffer,
};
static void upload_polygon_stipple(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &brw->intel.ctx;
+ struct gl_context *ctx = &brw->ctx;
GLuint i;
/* _NEW_POLYGON */
if (!ctx->Polygon.StippleFlag)
return;
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(33);
OUT_BATCH(_3DSTATE_POLY_STIPPLE_PATTERN << 16 | (33 - 2));
static void upload_polygon_stipple_offset(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &brw->intel.ctx;
+ struct gl_context *ctx = &brw->ctx;
/* _NEW_POLYGON */
if (!ctx->Polygon.StippleFlag)
return;
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(2);
OUT_BATCH(_3DSTATE_POLY_STIPPLE_OFFSET << 16 | (2-2));
* to a user-created FBO then our native pixel coordinate system
* works just fine, and there's no window system to worry about.
*/
- if (_mesa_is_winsys_fbo(brw->intel.ctx.DrawBuffer))
+ if (_mesa_is_winsys_fbo(ctx->DrawBuffer))
OUT_BATCH((32 - (ctx->DrawBuffer->Height & 31)) & 31);
else
OUT_BATCH(0);
*/
static void upload_aa_line_parameters(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &brw->intel.ctx;
+ struct gl_context *ctx = &brw->ctx;
if (!ctx->Line.SmoothFlag || !brw->has_aa_line_parameters)
return;
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
OUT_BATCH(_3DSTATE_AA_LINE_PARAMETERS << 16 | (3 - 2));
/* use legacy aa line coverage computation */
static void upload_line_stipple(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
- struct gl_context *ctx = &brw->intel.ctx;
+ struct gl_context *ctx = &brw->ctx;
GLfloat tmp;
GLint tmpi;
if (!ctx->Line.StippleFlag)
return;
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(3);
OUT_BATCH(_3DSTATE_LINE_STIPPLE_PATTERN << 16 | (3 - 2));
OUT_BATCH(ctx->Line.StipplePattern);
- tmp = 1.0 / (GLfloat) ctx->Line.StippleFactor;
- tmpi = tmp * (1<<13);
- OUT_BATCH(tmpi << 16 | ctx->Line.StippleFactor);
+
+ if (brw->gen >= 7) {
+ /* in U1.16 */
+ tmp = 1.0 / (GLfloat) ctx->Line.StippleFactor;
+ tmpi = tmp * (1<<16);
+ OUT_BATCH(tmpi << 15 | ctx->Line.StippleFactor);
+ }
+ else {
+ /* in U1.13 */
+ tmp = 1.0 / (GLfloat) ctx->Line.StippleFactor;
+ tmpi = tmp * (1<<13);
+ OUT_BATCH(tmpi << 16 | ctx->Line.StippleFactor);
+ }
+
CACHED_BATCH();
}
* Misc invariant state packets
*/
-static void upload_invariant_state( struct brw_context *brw )
+void
+brw_upload_invariant_state(struct brw_context *brw)
{
- struct intel_context *intel = &brw->intel;
-
/* 3DSTATE_SIP, 3DSTATE_MULTISAMPLE, etc. are nonpipelined. */
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
/* Select the 3D pipeline (as opposed to media) */
BEGIN_BATCH(1);
OUT_BATCH(brw->CMD_PIPELINE_SELECT << 16 | 0);
ADVANCE_BATCH();
- if (intel->gen < 6) {
+ if (brw->gen < 6) {
/* Disable depth offset clamping. */
BEGIN_BATCH(2);
OUT_BATCH(_3DSTATE_GLOBAL_DEPTH_OFFSET_CLAMP << 16 | (2 - 2));
ADVANCE_BATCH();
}
- if (intel->gen == 6) {
- int i;
-
- for (i = 0; i < 4; i++) {
- BEGIN_BATCH(4);
- OUT_BATCH(_3DSTATE_GS_SVB_INDEX << 16 | (4 - 2));
- OUT_BATCH(i << SVB_INDEX_SHIFT);
- OUT_BATCH(0);
- OUT_BATCH(0xffffffff);
- ADVANCE_BATCH();
- }
- }
-
BEGIN_BATCH(2);
OUT_BATCH(CMD_STATE_SIP << 16 | (2 - 2));
OUT_BATCH(0);
.brw = BRW_NEW_CONTEXT,
.cache = 0
},
- .emit = upload_invariant_state
+ .emit = brw_upload_invariant_state
};
/**
*/
static void upload_state_base_address( struct brw_context *brw )
{
- struct intel_context *intel = &brw->intel;
-
/* FINISHME: According to section 3.6.1 "STATE_BASE_ADDRESS" of
* vol1a of the G45 PRM, MI_FLUSH with the ISC invalidate should be
* programmed prior to STATE_BASE_ADDRESS.
* maybe this isn't required for us in particular.
*/
- if (intel->gen >= 6) {
- if (intel->gen == 6)
- intel_emit_post_sync_nonzero_flush(intel);
+ if (brw->gen >= 6) {
+ uint8_t mocs = brw->gen == 7 ? GEN7_MOCS_L3 : 0;
+
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(10);
OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (10 - 2));
- /* General state base address: stateless DP read/write requests */
- OUT_BATCH(1);
+ OUT_BATCH(mocs << 8 | /* General State Memory Object Control State */
+ mocs << 4 | /* Stateless Data Port Access Memory Object Control State */
+ 1); /* General State Base Address Modify Enable */
/* Surface state base address:
* BINDING_TABLE_STATE
* SURFACE_STATE
*/
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0, 1);
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0, 1);
/* Dynamic state base address:
* SAMPLER_STATE
* SAMPLER_BORDER_COLOR_STATE
* Push constants (when INSTPM: CONSTANT_BUFFER Address Offset
* Disable is clear, which we rely on)
*/
- OUT_RELOC(intel->batch.bo, (I915_GEM_DOMAIN_RENDER |
+ OUT_RELOC(brw->batch.bo, (I915_GEM_DOMAIN_RENDER |
I915_GEM_DOMAIN_INSTRUCTION), 0, 1);
OUT_BATCH(1); /* Indirect object base address: MEDIA_OBJECT data */
OUT_BATCH(1); /* Indirect object upper bound */
OUT_BATCH(1); /* Instruction access upper bound */
ADVANCE_BATCH();
- } else if (intel->gen == 5) {
+ } else if (brw->gen == 5) {
BEGIN_BATCH(8);
OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (8 - 2));
OUT_BATCH(1); /* General state base address */
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
1); /* Surface state base address */
OUT_BATCH(1); /* Indirect object base address */
OUT_RELOC(brw->cache.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
BEGIN_BATCH(6);
OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (6 - 2));
OUT_BATCH(1); /* General state base address */
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
1); /* Surface state base address */
OUT_BATCH(1); /* Indirect object base address */
OUT_BATCH(1); /* General state upper bound */