*/
#include "brw_vec4.h"
+#include "brw_fs.h"
#include "brw_cfg.h"
#include "brw_vs.h"
#include "brw_dead_control_flow.h"
this->fixed_hw_reg.dw1.d = i;
}
+src_reg::src_reg(uint8_t vf[4])
+{
+ init();
+
+ this->file = IMM;
+ this->type = BRW_REGISTER_TYPE_VF;
+ memcpy(&this->fixed_hw_reg.dw1.ud, vf, sizeof(unsigned));
+}
+
+src_reg::src_reg(uint8_t vf0, uint8_t vf1, uint8_t vf2, uint8_t vf3)
+{
+ init();
+
+ this->file = IMM;
+ this->type = BRW_REGISTER_TYPE_VF;
+ this->fixed_hw_reg.dw1.ud = (vf0 << 0) |
+ (vf1 << 8) |
+ (vf2 << 16) |
+ (vf3 << 24);
+}
+
src_reg::src_reg(struct brw_reg reg)
{
init();
this->fixed_hw_reg = reg.fixed_hw_reg;
}
+bool
+dst_reg::equals(const dst_reg &r) const
+{
+ return (file == r.file &&
+ reg == r.reg &&
+ reg_offset == r.reg_offset &&
+ type == r.type &&
+ negate == r.negate &&
+ abs == r.abs &&
+ writemask == r.writemask &&
+ (reladdr == r.reladdr ||
+ (reladdr && r.reladdr && reladdr->equals(*r.reladdr))) &&
+ memcmp(&fixed_hw_reg, &r.fixed_hw_reg,
+ sizeof(fixed_hw_reg)) == 0);
+}
+
bool
vec4_instruction::is_send_from_grf()
{
}
}
+unsigned
+vec4_instruction::regs_read(unsigned arg) const
+{
+ if (src[arg].file == BAD_FILE)
+ return 0;
+
+ switch (opcode) {
+ case SHADER_OPCODE_SHADER_TIME_ADD:
+ return arg == 0 ? mlen : 1;
+
+ case VS_OPCODE_PULL_CONSTANT_LOAD_GEN7:
+ return arg == 1 ? mlen : 1;
+
+ default:
+ return 1;
+ }
+}
+
bool
vec4_instruction::can_do_source_mods(struct brw_context *brw)
{
int
vec4_visitor::implied_mrf_writes(vec4_instruction *inst)
{
- if (inst->mlen == 0)
+ if (inst->mlen == 0 || inst->is_send_from_grf())
return 0;
switch (inst->opcode) {
case SHADER_OPCODE_GEN4_SCRATCH_WRITE:
return 3;
case GS_OPCODE_URB_WRITE:
+ case GS_OPCODE_URB_WRITE_ALLOCATE:
case GS_OPCODE_THREAD_END:
return 0;
+ case GS_OPCODE_FF_SYNC:
+ return 1;
case SHADER_OPCODE_SHADER_TIME_ADD:
return 0;
case SHADER_OPCODE_TEX:
sizeof(fixed_hw_reg)) == 0);
}
-static bool
-try_eliminate_instruction(vec4_instruction *inst, int new_writemask,
- const struct brw_context *brw)
+bool
+vec4_visitor::opt_vector_float()
{
- if (inst->has_side_effects())
- return false;
+ bool progress = false;
- if (new_writemask == 0) {
- /* Don't dead code eliminate instructions that write to the
- * accumulator as a side-effect. Instead just set the destination
- * to the null register to free it.
- */
- if (inst->writes_accumulator || inst->writes_flag()) {
- inst->dst = dst_reg(retype(brw_null_reg(), inst->dst.type));
- } else {
- inst->remove();
+ int last_reg = -1, last_reg_offset = -1;
+ enum register_file last_reg_file = BAD_FILE;
+
+ int remaining_channels = 0;
+ uint8_t imm[4];
+ int inst_count = 0;
+ vec4_instruction *imm_inst[4];
+
+ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) {
+ if (last_reg != inst->dst.reg ||
+ last_reg_offset != inst->dst.reg_offset ||
+ last_reg_file != inst->dst.file) {
+ last_reg = inst->dst.reg;
+ last_reg_offset = inst->dst.reg_offset;
+ last_reg_file = inst->dst.file;
+ remaining_channels = WRITEMASK_XYZW;
+
+ inst_count = 0;
}
- return true;
- } else if (inst->dst.writemask != new_writemask) {
- switch (inst->opcode) {
- case SHADER_OPCODE_TXF_CMS:
- case SHADER_OPCODE_GEN4_SCRATCH_READ:
- case VS_OPCODE_PULL_CONSTANT_LOAD:
- case VS_OPCODE_PULL_CONSTANT_LOAD_GEN7:
- break;
- default:
- /* Do not set a writemask on Gen6 for math instructions, those are
- * executed using align1 mode that does not support a destination mask.
- */
- if (!(brw->gen == 6 && inst->is_math()) && !inst->is_tex()) {
- inst->dst.writemask = new_writemask;
- return true;
+ if (inst->opcode != BRW_OPCODE_MOV ||
+ inst->dst.writemask == WRITEMASK_XYZW ||
+ inst->src[0].file != IMM)
+ continue;
+
+ int vf = brw_float_to_vf(inst->src[0].fixed_hw_reg.dw1.f);
+ if (vf == -1)
+ continue;
+
+ if ((inst->dst.writemask & WRITEMASK_X) != 0)
+ imm[0] = vf;
+ if ((inst->dst.writemask & WRITEMASK_Y) != 0)
+ imm[1] = vf;
+ if ((inst->dst.writemask & WRITEMASK_Z) != 0)
+ imm[2] = vf;
+ if ((inst->dst.writemask & WRITEMASK_W) != 0)
+ imm[3] = vf;
+
+ imm_inst[inst_count++] = inst;
+
+ remaining_channels &= ~inst->dst.writemask;
+ if (remaining_channels == 0) {
+ vec4_instruction *mov = MOV(inst->dst, imm);
+ mov->dst.type = BRW_REGISTER_TYPE_F;
+ mov->dst.writemask = WRITEMASK_XYZW;
+ inst->insert_after(block, mov);
+ last_reg = -1;
+
+ for (int i = 0; i < inst_count; i++) {
+ imm_inst[i]->remove(block);
}
+ progress = true;
}
}
- return false;
+ if (progress)
+ invalidate_live_intervals();
+
+ return progress;
}
-/**
- * Must be called after calculate_live_intervals() to remove unused
- * writes to registers -- register allocation will fail otherwise
- * because something deffed but not used won't be considered to
- * interfere with other regs.
+/* Replaces unused channels of a swizzle with channels that are used.
+ *
+ * For instance, this pass transforms
+ *
+ * mov vgrf4.yz, vgrf5.wxzy
+ *
+ * into
+ *
+ * mov vgrf4.yz, vgrf5.xxzx
+ *
+ * This eliminates false uses of some channels, letting dead code elimination
+ * remove the instructions that wrote them.
*/
bool
-vec4_visitor::dead_code_eliminate()
+vec4_visitor::opt_reduce_swizzle()
{
bool progress = false;
- int pc = -1;
- calculate_live_intervals();
+ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) {
+ if (inst->dst.file == BAD_FILE || inst->dst.file == HW_REG ||
+ inst->is_send_from_grf())
+ continue;
- foreach_in_list_safe(vec4_instruction, inst, &instructions) {
- pc++;
+ int swizzle[4];
- bool inst_writes_flag = false;
- if (inst->dst.file != GRF) {
- if (inst->dst.is_null() && inst->writes_flag()) {
- inst_writes_flag = true;
- } else {
- continue;
- }
+ /* Determine which channels of the sources are read. */
+ switch (inst->opcode) {
+ case VEC4_OPCODE_PACK_BYTES:
+ swizzle[0] = 0;
+ swizzle[1] = 1;
+ swizzle[2] = 2;
+ swizzle[3] = 3;
+ break;
+ case BRW_OPCODE_DP4:
+ case BRW_OPCODE_DPH: /* FINISHME: DPH reads only three channels of src0,
+ * but all four of src1.
+ */
+ swizzle[0] = 0;
+ swizzle[1] = 1;
+ swizzle[2] = 2;
+ swizzle[3] = 3;
+ break;
+ case BRW_OPCODE_DP3:
+ swizzle[0] = 0;
+ swizzle[1] = 1;
+ swizzle[2] = 2;
+ swizzle[3] = -1;
+ break;
+ case BRW_OPCODE_DP2:
+ swizzle[0] = 0;
+ swizzle[1] = 1;
+ swizzle[2] = -1;
+ swizzle[3] = -1;
+ break;
+ default:
+ swizzle[0] = inst->dst.writemask & WRITEMASK_X ? 0 : -1;
+ swizzle[1] = inst->dst.writemask & WRITEMASK_Y ? 1 : -1;
+ swizzle[2] = inst->dst.writemask & WRITEMASK_Z ? 2 : -1;
+ swizzle[3] = inst->dst.writemask & WRITEMASK_W ? 3 : -1;
+ break;
}
- if (inst->dst.file == GRF) {
- int write_mask = inst->dst.writemask;
-
- for (int c = 0; c < 4; c++) {
- if (write_mask & (1 << c)) {
- assert(this->virtual_grf_end[inst->dst.reg * 4 + c] >= pc);
- if (this->virtual_grf_end[inst->dst.reg * 4 + c] == pc) {
- write_mask &= ~(1 << c);
- }
- }
+ /* Resolve unread channels (-1) by assigning them the swizzle of the
+ * first channel that is used.
+ */
+ int first_used_channel = 0;
+ for (int i = 0; i < 4; i++) {
+ if (swizzle[i] != -1) {
+ first_used_channel = swizzle[i];
+ break;
}
-
- progress = try_eliminate_instruction(inst, write_mask, brw) ||
- progress;
}
-
- if (inst->predicate || inst->prev == NULL)
- continue;
-
- int dead_channels;
- if (inst_writes_flag) {
-/* Arbitrarily chosen, other than not being an xyzw writemask. */
-#define FLAG_WRITEMASK (1 << 5)
- dead_channels = inst->reads_flag() ? 0 : FLAG_WRITEMASK;
- } else {
- dead_channels = inst->dst.writemask;
-
- for (int i = 0; i < 3; i++) {
- if (inst->src[i].file != GRF ||
- inst->src[i].reg != inst->dst.reg)
- continue;
-
- for (int j = 0; j < 4; j++) {
- int swiz = BRW_GET_SWZ(inst->src[i].swizzle, j);
- dead_channels &= ~(1 << swiz);
- }
+ for (int i = 0; i < 4; i++) {
+ if (swizzle[i] == -1) {
+ swizzle[i] = first_used_channel;
}
}
- for (exec_node *node = inst->prev, *prev = node->prev;
- prev != NULL && dead_channels != 0;
- node = prev, prev = prev->prev) {
- vec4_instruction *scan_inst = (vec4_instruction *)node;
-
- if (scan_inst->is_control_flow())
- break;
-
- if (inst_writes_flag) {
- if (scan_inst->dst.is_null() && scan_inst->writes_flag()) {
- scan_inst->remove();
- progress = true;
- continue;
- } else if (scan_inst->reads_flag()) {
- break;
- }
- }
-
- if (inst->dst.file == scan_inst->dst.file &&
- inst->dst.reg == scan_inst->dst.reg &&
- inst->dst.reg_offset == scan_inst->dst.reg_offset) {
- int new_writemask = scan_inst->dst.writemask & ~dead_channels;
+ /* Update sources' swizzles. */
+ for (int i = 0; i < 3; i++) {
+ if (inst->src[i].file != GRF &&
+ inst->src[i].file != ATTR &&
+ inst->src[i].file != UNIFORM)
+ continue;
- progress = try_eliminate_instruction(scan_inst, new_writemask, brw) ||
- progress;
+ int swiz[4];
+ for (int j = 0; j < 4; j++) {
+ swiz[j] = BRW_GET_SWZ(inst->src[i].swizzle, swizzle[j]);
}
- for (int i = 0; i < 3; i++) {
- if (scan_inst->src[i].file != inst->dst.file ||
- scan_inst->src[i].reg != inst->dst.reg)
- continue;
-
- for (int j = 0; j < 4; j++) {
- int swiz = BRW_GET_SWZ(scan_inst->src[i].swizzle, j);
- dead_channels &= ~(1 << swiz);
- }
+ unsigned new_swizzle = BRW_SWIZZLE4(swiz[0], swiz[1], swiz[2], swiz[3]);
+ if (inst->src[i].swizzle != new_swizzle) {
+ inst->src[i].swizzle = new_swizzle;
+ progress = true;
}
}
}
* vector. The goal is to make elimination of unused uniform
* components easier later.
*/
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
for (int i = 0 ; i < 3; i++) {
if (inst->src[i].file != UNIFORM)
continue;
* expect unused vector elements when we've moved array access out
* to pull constants, and from some GLSL code generators like wine.
*/
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
for (int i = 0 ; i < 3; i++) {
if (inst->src[i].file != UNIFORM)
continue;
this->uniforms = new_uniform_count;
/* Now, update the instructions for our repacked uniforms. */
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
for (int i = 0 ; i < 3; i++) {
int src = inst->src[i].reg;
{
bool progress = false;
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
switch (inst->opcode) {
+ case BRW_OPCODE_MOV:
+ if (inst->src[0].file != IMM)
+ break;
+
+ if (inst->saturate) {
+ if (inst->dst.type != inst->src[0].type)
+ assert(!"unimplemented: saturate mixed types");
+
+ if (brw_saturate_immediate(inst->dst.type,
+ &inst->src[0].fixed_hw_reg)) {
+ inst->saturate = false;
+ progress = true;
+ }
+ }
+ break;
+
+ case VEC4_OPCODE_UNPACK_UNIFORM:
+ if (inst->src[0].file != UNIFORM) {
+ inst->opcode = BRW_OPCODE_MOV;
+ progress = true;
+ }
+ break;
+
case BRW_OPCODE_ADD:
if (inst->src[1].is_zero()) {
inst->opcode = BRW_OPCODE_MOV;
inst->opcode = BRW_OPCODE_MOV;
inst->src[1] = src_reg();
progress = true;
+ } else if (inst->src[1].is_negative_one()) {
+ inst->opcode = BRW_OPCODE_MOV;
+ inst->src[0].negate = !inst->src[0].negate;
+ inst->src[1] = src_reg();
+ progress = true;
}
break;
+ case BRW_OPCODE_CMP:
+ if (inst->conditional_mod == BRW_CONDITIONAL_GE &&
+ inst->src[0].abs &&
+ inst->src[0].negate &&
+ inst->src[1].is_zero()) {
+ inst->src[0].abs = false;
+ inst->src[0].negate = false;
+ inst->conditional_mod = BRW_CONDITIONAL_Z;
+ progress = true;
+ break;
+ }
+ break;
+ case SHADER_OPCODE_RCP: {
+ vec4_instruction *prev = (vec4_instruction *)inst->prev;
+ if (prev->opcode == SHADER_OPCODE_SQRT) {
+ if (inst->src[0].equals(src_reg(prev->dst))) {
+ inst->opcode = SHADER_OPCODE_RSQ;
+ inst->src[0] = prev->src[0];
+ progress = true;
+ }
+ }
+ break;
+ }
default:
break;
}
pull_constant_loc[i / 4] = -1;
if (i >= max_uniform_components) {
- const float **values = &stage_prog_data->param[i];
+ const gl_constant_value **values = &stage_prog_data->param[i];
/* Try to find an existing copy of this uniform in the pull
* constants if it was part of an array access already.
/* Now actually rewrite usage of the things we've moved to pull
* constants.
*/
- foreach_in_list_safe(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) {
for (int i = 0 ; i < 3; i++) {
if (inst->src[i].file != UNIFORM ||
pull_constant_loc[inst->src[i].reg] == -1)
dst_reg temp = dst_reg(this, glsl_type::vec4_type);
- emit_pull_constant_load(inst, temp, inst->src[i],
+ emit_pull_constant_load(block, inst, temp, inst->src[i],
pull_constant_loc[uniform]);
inst->src[i].file = temp.file;
pack_uniform_registers();
}
+/* Conditions for which we want to avoid setting the dependency control bits */
+bool
+vec4_visitor::is_dep_ctrl_unsafe(const vec4_instruction *inst)
+{
+#define IS_DWORD(reg) \
+ (reg.type == BRW_REGISTER_TYPE_UD || \
+ reg.type == BRW_REGISTER_TYPE_D)
+
+ /* "When source or destination datatype is 64b or operation is integer DWord
+ * multiply, DepCtrl must not be used."
+ * May apply to future SoCs as well.
+ */
+ if (brw->is_cherryview) {
+ if (inst->opcode == BRW_OPCODE_MUL &&
+ IS_DWORD(inst->src[0]) &&
+ IS_DWORD(inst->src[1]))
+ return true;
+ }
+#undef IS_DWORD
+
+ if (brw->gen >= 8) {
+ if (inst->opcode == BRW_OPCODE_F32TO16)
+ return true;
+ }
+
+ /*
+ * mlen:
+ * In the presence of send messages, totally interrupt dependency
+ * control. They're long enough that the chance of dependency
+ * control around them just doesn't matter.
+ *
+ * predicate:
+ * From the Ivy Bridge PRM, volume 4 part 3.7, page 80:
+ * When a sequence of NoDDChk and NoDDClr are used, the last instruction that
+ * completes the scoreboard clear must have a non-zero execution mask. This
+ * means, if any kind of predication can change the execution mask or channel
+ * enable of the last instruction, the optimization must be avoided. This is
+ * to avoid instructions being shot down the pipeline when no writes are
+ * required.
+ *
+ * math:
+ * Dependency control does not work well over math instructions.
+ * NB: Discovered empirically
+ */
+ return (inst->mlen || inst->predicate || inst->is_math());
+}
+
/**
* Sets the dependency control fields on instructions after register
* allocation and before the generator is run.
vec4_instruction *last_mrf_write[BRW_MAX_GRF];
uint8_t mrf_channels_written[BRW_MAX_GRF];
- calculate_cfg();
-
assert(prog_data->total_grf ||
!"Must be called after register allocation");
- for (int i = 0; i < cfg->num_blocks; i++) {
- bblock_t *bblock = cfg->blocks[i];
-
+ foreach_block (block, cfg) {
memset(last_grf_write, 0, sizeof(last_grf_write));
memset(last_mrf_write, 0, sizeof(last_mrf_write));
- foreach_inst_in_block (vec4_instruction, inst, bblock) {
+ foreach_inst_in_block (vec4_instruction, inst, block) {
/* If we read from a register that we were doing dependency control
* on, don't do dependency control across the read.
*/
assert(inst->src[i].file != MRF);
}
- /* In the presence of send messages, totally interrupt dependency
- * control. They're long enough that the chance of dependency
- * control around them just doesn't matter.
- */
- if (inst->mlen) {
- memset(last_grf_write, 0, sizeof(last_grf_write));
- memset(last_mrf_write, 0, sizeof(last_mrf_write));
- continue;
- }
-
- /* It looks like setting dependency control on a predicated
- * instruction hangs the GPU.
- */
- if (inst->predicate) {
- memset(last_grf_write, 0, sizeof(last_grf_write));
- memset(last_mrf_write, 0, sizeof(last_mrf_write));
- continue;
- }
-
- /* Dependency control does not work well over math instructions.
- */
- if (inst->is_math()) {
+ if (is_dep_ctrl_unsafe(inst)) {
memset(last_grf_write, 0, sizeof(last_grf_write));
memset(last_mrf_write, 0, sizeof(last_mrf_write));
continue;
}
bool
-vec4_instruction::can_reswizzle_dst(int dst_writemask,
- int swizzle,
- int swizzle_mask)
+vec4_instruction::can_reswizzle(int dst_writemask,
+ int swizzle,
+ int swizzle_mask)
{
/* If this instruction sets anything not referenced by swizzle, then we'd
* totally break it when we reswizzle.
if (dst.writemask & ~swizzle_mask)
return false;
- switch (opcode) {
- case BRW_OPCODE_DP4:
- case BRW_OPCODE_DP3:
- case BRW_OPCODE_DP2:
- return true;
- default:
- /* Check if there happens to be no reswizzling required. */
- for (int c = 0; c < 4; c++) {
- int bit = 1 << BRW_GET_SWZ(swizzle, c);
- /* Skip components of the swizzle not used by the dst. */
- if (!(dst_writemask & (1 << c)))
- continue;
+ if (mlen > 0)
+ return false;
- /* We don't do the reswizzling yet, so just sanity check that we
- * don't have to.
- */
- if (bit != (1 << c))
- return false;
- }
- return true;
- }
+ return true;
}
/**
* e.g. for swizzle=yywx, MUL a.xy b c -> MUL a.yy_x b.yy z.yy_x
*/
void
-vec4_instruction::reswizzle_dst(int dst_writemask, int swizzle)
+vec4_instruction::reswizzle(int dst_writemask, int swizzle)
{
int new_writemask = 0;
+ int new_swizzle[4] = { 0 };
- switch (opcode) {
- case BRW_OPCODE_DP4:
- case BRW_OPCODE_DP3:
- case BRW_OPCODE_DP2:
- for (int c = 0; c < 4; c++) {
- int bit = 1 << BRW_GET_SWZ(swizzle, c);
- /* Skip components of the swizzle not used by the dst. */
- if (!(dst_writemask & (1 << c)))
+ /* Dot product instructions write a single result into all channels. */
+ if (opcode != BRW_OPCODE_DP4 && opcode != BRW_OPCODE_DPH &&
+ opcode != BRW_OPCODE_DP3 && opcode != BRW_OPCODE_DP2) {
+ for (int i = 0; i < 3; i++) {
+ if (src[i].file == BAD_FILE || src[i].file == IMM)
continue;
- /* If we were populating this component, then populate the
- * corresponding channel of the new dst.
+
+ /* Destination write mask doesn't correspond to source swizzle for the
+ * pack_bytes instruction.
*/
- if (dst.writemask & bit)
- new_writemask |= (1 << c);
- }
- dst.writemask = new_writemask;
- break;
- default:
- for (int c = 0; c < 4; c++) {
- /* Skip components of the swizzle not used by the dst. */
- if (!(dst_writemask & (1 << c)))
+ if (opcode == VEC4_OPCODE_PACK_BYTES)
continue;
- /* We don't do the reswizzling yet, so just sanity check that we
- * don't have to.
- */
- assert((1 << BRW_GET_SWZ(swizzle, c)) == (1 << c));
+ for (int c = 0; c < 4; c++) {
+ new_swizzle[c] = BRW_GET_SWZ(src[i].swizzle, BRW_GET_SWZ(swizzle, c));
+ }
+
+ src[i].swizzle = BRW_SWIZZLE4(new_swizzle[0], new_swizzle[1],
+ new_swizzle[2], new_swizzle[3]);
}
- break;
}
+
+ for (int c = 0; c < 4; c++) {
+ int bit = 1 << BRW_GET_SWZ(swizzle, c);
+ /* Skip components of the swizzle not used by the dst. */
+ if (!(dst_writemask & (1 << c)))
+ continue;
+ /* If we were populating this component, then populate the
+ * corresponding channel of the new dst.
+ */
+ if (dst.writemask & bit)
+ new_writemask |= (1 << c);
+ }
+ dst.writemask = new_writemask;
}
/*
calculate_live_intervals();
- foreach_in_list_safe(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst_safe (block, vec4_instruction, inst, cfg) {
int ip = next_ip;
next_ip++;
* everything writing to the temporary to write into the destination
* instead.
*/
- vec4_instruction *scan_inst;
- for (scan_inst = (vec4_instruction *)inst->prev;
- scan_inst->prev != NULL;
- scan_inst = (vec4_instruction *)scan_inst->prev) {
+ vec4_instruction *_scan_inst = (vec4_instruction *)inst->prev;
+ foreach_inst_in_block_reverse_starting_from(vec4_instruction, scan_inst,
+ inst, block) {
+ _scan_inst = scan_inst;
+
if (scan_inst->dst.file == GRF &&
scan_inst->dst.reg == inst->src[0].reg &&
scan_inst->dst.reg_offset == inst->src[0].reg_offset) {
}
/* If we can't handle the swizzle, bail. */
- if (!scan_inst->can_reswizzle_dst(inst->dst.writemask,
- inst->src[0].swizzle,
- swizzle_mask)) {
+ if (!scan_inst->can_reswizzle(inst->dst.writemask,
+ inst->src[0].swizzle,
+ swizzle_mask)) {
break;
}
break;
}
- /* We don't handle flow control here. Most computation of values
- * that could be coalesced happens just before their use.
- */
- if (scan_inst->opcode == BRW_OPCODE_DO ||
- scan_inst->opcode == BRW_OPCODE_WHILE ||
- scan_inst->opcode == BRW_OPCODE_ELSE ||
- scan_inst->opcode == BRW_OPCODE_ENDIF) {
- break;
- }
-
/* You can't read from an MRF, so if someone else reads our MRF's
* source GRF that we wanted to rewrite, that stops us. If it's a
* GRF we're trying to coalesce to, we don't actually handle
* computing the value. Now go rewrite the instruction stream
* between the two.
*/
-
+ vec4_instruction *scan_inst = _scan_inst;
while (scan_inst != inst) {
if (scan_inst->dst.file == GRF &&
scan_inst->dst.reg == inst->src[0].reg &&
scan_inst->dst.reg_offset == inst->src[0].reg_offset) {
- scan_inst->reswizzle_dst(inst->dst.writemask,
- inst->src[0].swizzle);
+ scan_inst->reswizzle(inst->dst.writemask,
+ inst->src[0].swizzle);
scan_inst->dst.file = inst->dst.file;
scan_inst->dst.reg = inst->dst.reg;
scan_inst->dst.reg_offset = inst->dst.reg_offset;
}
scan_inst = (vec4_instruction *)scan_inst->next;
}
- inst->remove();
+ inst->remove(block);
progress = true;
}
}
void
vec4_visitor::split_virtual_grfs()
{
- int num_vars = this->virtual_grf_count;
+ int num_vars = this->alloc.count;
int new_virtual_grf[num_vars];
bool split_grf[num_vars];
/* Try to split anything > 0 sized. */
for (int i = 0; i < num_vars; i++) {
- split_grf[i] = this->virtual_grf_sizes[i] != 1;
+ split_grf[i] = this->alloc.sizes[i] != 1;
}
/* Check that the instructions are compatible with the registers we're trying
* to split.
*/
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
/* If there's a SEND message loading from a GRF on gen7+, it needs to be
* contiguous.
*/
if (!split_grf[i])
continue;
- new_virtual_grf[i] = virtual_grf_alloc(1);
- for (int j = 2; j < this->virtual_grf_sizes[i]; j++) {
- int reg = virtual_grf_alloc(1);
+ new_virtual_grf[i] = alloc.allocate(1);
+ for (unsigned j = 2; j < this->alloc.sizes[i]; j++) {
+ unsigned reg = alloc.allocate(1);
assert(reg == new_virtual_grf[i] + j - 1);
(void) reg;
}
- this->virtual_grf_sizes[i] = 1;
+ this->alloc.sizes[i] = 1;
}
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
if (inst->dst.file == GRF && split_grf[inst->dst.reg] &&
inst->dst.reg_offset != 0) {
inst->dst.reg = (new_virtual_grf[inst->dst.reg] +
vec4_instruction *inst = (vec4_instruction *)be_inst;
if (inst->predicate) {
- fprintf(file, "(%cf0) ",
- inst->predicate_inverse ? '-' : '+');
+ fprintf(file, "(%cf0.%d) ",
+ inst->predicate_inverse ? '-' : '+',
+ inst->flag_subreg);
}
fprintf(file, "%s", brw_instruction_name(inst->opcode));
+ if (inst->saturate)
+ fprintf(file, ".sat");
if (inst->conditional_mod) {
fprintf(file, "%s", conditional_modifier[inst->conditional_mod]);
+ if (!inst->predicate &&
+ (brw->gen < 5 || (inst->opcode != BRW_OPCODE_SEL &&
+ inst->opcode != BRW_OPCODE_IF &&
+ inst->opcode != BRW_OPCODE_WHILE))) {
+ fprintf(file, ".f0.%d", inst->flag_subreg);
+ }
}
fprintf(file, " ");
if (inst->dst.writemask & 8)
fprintf(file, "w");
}
- fprintf(file, ":%s, ", brw_reg_type_letters(inst->dst.type));
+ fprintf(file, ":%s", brw_reg_type_letters(inst->dst.type));
+
+ if (inst->src[0].file != BAD_FILE)
+ fprintf(file, ", ");
for (int i = 0; i < 3 && inst->src[i].file != BAD_FILE; i++) {
if (inst->src[i].negate)
case BRW_REGISTER_TYPE_UD:
fprintf(file, "%uU", inst->src[i].fixed_hw_reg.dw1.ud);
break;
+ case BRW_REGISTER_TYPE_VF:
+ fprintf(file, "[%-gF, %-gF, %-gF, %-gF]",
+ brw_vf_to_float((inst->src[i].fixed_hw_reg.dw1.ud >> 0) & 0xff),
+ brw_vf_to_float((inst->src[i].fixed_hw_reg.dw1.ud >> 8) & 0xff),
+ brw_vf_to_float((inst->src[i].fixed_hw_reg.dw1.ud >> 16) & 0xff),
+ brw_vf_to_float((inst->src[i].fixed_hw_reg.dw1.ud >> 24) & 0xff));
+ break;
default:
fprintf(file, "???");
break;
/* Don't print .0; and only VGRFs have reg_offsets and sizes */
if (inst->src[i].reg_offset != 0 &&
inst->src[i].file == GRF &&
- virtual_grf_sizes[inst->src[i].reg] != 1)
+ alloc.sizes[inst->src[i].reg] != 1)
fprintf(file, ".%d", inst->src[i].reg_offset);
if (inst->src[i].file != IMM) {
vec4_visitor::lower_attributes_to_hw_regs(const int *attribute_map,
bool interleaved)
{
- foreach_in_list(vec4_instruction, inst, &instructions) {
+ foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
/* We have to support ATTR as a destination for GL_FIXED fixup. */
if (inst->dst.file == ATTR) {
int grf = attribute_map[inst->dst.reg + inst->dst.reg_offset];
* don't represent it with a flag in inputs_read, so we call it
* VERT_ATTRIB_MAX.
*/
- if (vs_prog_data->uses_vertexid) {
+ if (vs_prog_data->uses_vertexid || vs_prog_data->uses_instanceid) {
attribute_map[VERT_ATTRIB_MAX] = payload_reg + nr_attributes;
nr_attributes++;
}
this->uniform_vector_size[this->uniforms] = 1;
stage_prog_data->param =
- reralloc(NULL, stage_prog_data->param, const float *, 4);
+ reralloc(NULL, stage_prog_data->param, const gl_constant_value *, 4);
for (unsigned int i = 0; i < 4; i++) {
unsigned int slot = this->uniforms * 4 + i;
- static float zero = 0.0;
+ static gl_constant_value zero = { 0.0 };
stage_prog_data->param[slot] = &zero;
}
stage_prog_data->nr_params = this->uniforms * 4;
- prog_data->curb_read_length = reg - prog_data->base.dispatch_grf_start_reg;
+ prog_data->base.curb_read_length =
+ reg - prog_data->base.dispatch_grf_start_reg;
return reg;
}
this->first_non_payload_grf = reg;
}
+void
+vec4_visitor::assign_binding_table_offsets()
+{
+ assign_common_binding_table_offsets(0);
+}
+
src_reg
vec4_visitor::get_timestamp()
{
src_reg ts = src_reg(brw_reg(BRW_ARCHITECTURE_REGISTER_FILE,
BRW_ARF_TIMESTAMP,
0,
+ 0,
+ 0,
BRW_REGISTER_TYPE_UD,
BRW_VERTICAL_STRIDE_0,
BRW_WIDTH_4,
time.type = BRW_REGISTER_TYPE_UD;
emit(MOV(time, src_reg(value)));
- emit(SHADER_OPCODE_SHADER_TIME_ADD, dst_reg(), src_reg(dst));
+ vec4_instruction *inst =
+ emit(SHADER_OPCODE_SHADER_TIME_ADD, dst_reg(), src_reg(dst));
+ inst->mlen = 2;
}
bool
if (INTEL_DEBUG & DEBUG_SHADER_TIME)
emit_shader_time_begin();
- assign_common_binding_table_offsets(0);
+ assign_binding_table_offsets();
emit_prolog();
emit_thread_end();
+ calculate_cfg();
+
/* Before any optimization, push array accesses out to scratch
* space where we need them to be. This pass may allocate new
* virtual GRFs, so we want to do it early. It also makes sure
const char *stage_name = stage == MESA_SHADER_GEOMETRY ? "gs" : "vs";
-#define OPT(pass, args...) do { \
+#define OPT(pass, args...) ({ \
pass_num++; \
bool this_progress = pass(args); \
\
if (unlikely(INTEL_DEBUG & DEBUG_OPTIMIZER) && this_progress) { \
char filename[64]; \
snprintf(filename, 64, "%s-%04d-%02d-%02d-" #pass, \
- stage_name, shader_prog->Name, iteration, pass_num); \
+ stage_name, shader_prog ? shader_prog->Name : 0, iteration, pass_num); \
\
backend_visitor::dump_instructions(filename); \
} \
\
progress = progress || this_progress; \
- } while (false)
+ this_progress; \
+ })
if (unlikely(INTEL_DEBUG & DEBUG_OPTIMIZER)) {
char filename[64];
snprintf(filename, 64, "%s-%04d-00-start",
- stage_name, shader_prog->Name);
+ stage_name, shader_prog ? shader_prog->Name : 0);
backend_visitor::dump_instructions(filename);
}
bool progress;
int iteration = 0;
+ int pass_num = 0;
do {
progress = false;
+ pass_num = 0;
iteration++;
- int pass_num = 0;
+ OPT(opt_reduce_swizzle);
OPT(dead_code_eliminate);
OPT(dead_control_flow_eliminate, this);
OPT(opt_copy_propagation);
- OPT(opt_algebraic);
OPT(opt_cse);
+ OPT(opt_algebraic);
OPT(opt_register_coalesce);
} while (progress);
+ pass_num = 0;
+
+ if (OPT(opt_vector_float)) {
+ OPT(opt_cse);
+ OPT(opt_copy_propagation, false);
+ OPT(opt_copy_propagation, true);
+ OPT(dead_code_eliminate);
+ }
if (failed)
return false;
if (false) {
/* Debug of register spilling: Go spill everything. */
- const int grf_count = virtual_grf_count;
- float spill_costs[virtual_grf_count];
- bool no_spill[virtual_grf_count];
+ const int grf_count = alloc.count;
+ float spill_costs[alloc.count];
+ bool no_spill[alloc.count];
evaluate_spill_costs(spill_costs, no_spill);
for (int i = 0; i < grf_count; i++) {
if (no_spill[i])
{
bool start_busy = false;
double start_time = 0;
+ const unsigned *assembly = NULL;
if (unlikely(brw->perf_debug)) {
start_busy = (brw->batch.last_bo &&
shader = (brw_shader *) prog->_LinkedShaders[MESA_SHADER_VERTEX];
if (unlikely(INTEL_DEBUG & DEBUG_VS))
- brw_dump_ir(brw, "vertex", prog, &shader->base, &c->vp->program.Base);
+ brw_dump_ir("vertex", prog, &shader->base, &c->vp->program.Base);
+
+ if (prog && brw->gen >= 8 && brw->scalar_vs) {
+ fs_visitor v(brw, mem_ctx, &c->key, prog_data, prog, &c->vp->program, 8);
+ if (!v.run_vs()) {
+ if (prog) {
+ prog->LinkStatus = false;
+ ralloc_strcat(&prog->InfoLog, v.fail_msg);
+ }
- vec4_vs_visitor v(brw, c, prog_data, prog, mem_ctx);
- if (!v.run()) {
- if (prog) {
- prog->LinkStatus = false;
- ralloc_strcat(&prog->InfoLog, v.fail_msg);
+ _mesa_problem(NULL, "Failed to compile vertex shader: %s\n",
+ v.fail_msg);
+
+ return NULL;
}
- _mesa_problem(NULL, "Failed to compile vertex shader: %s\n",
- v.fail_msg);
+ fs_generator g(brw, mem_ctx, (void *) &c->key, &prog_data->base.base,
+ &c->vp->program.Base, v.promoted_constants,
+ v.runtime_check_aads_emit, "VS");
+ if (INTEL_DEBUG & DEBUG_VS) {
+ char *name = ralloc_asprintf(mem_ctx, "%s vertex shader %d",
+ prog->Label ? prog->Label : "unnamed",
+ prog->Name);
+ g.enable_debug(name);
+ }
+ g.generate_code(v.cfg, 8);
+ assembly = g.get_assembly(final_assembly_size);
- return NULL;
+ if (assembly)
+ prog_data->base.simd8 = true;
+ c->base.last_scratch = v.last_scratch;
}
- const unsigned *assembly = NULL;
- if (brw->gen >= 8 && getenv("GEN8") != NULL) {
- gen8_vec4_generator g(brw, prog, &c->vp->program.Base, &prog_data->base,
- mem_ctx, INTEL_DEBUG & DEBUG_VS);
- assembly = g.generate_assembly(&v.instructions, final_assembly_size);
- } else {
+ if (!assembly) {
+ vec4_vs_visitor v(brw, c, prog_data, prog, mem_ctx);
+ if (!v.run()) {
+ if (prog) {
+ prog->LinkStatus = false;
+ ralloc_strcat(&prog->InfoLog, v.fail_msg);
+ }
+
+ _mesa_problem(NULL, "Failed to compile vertex shader: %s\n",
+ v.fail_msg);
+
+ return NULL;
+ }
+
vec4_generator g(brw, prog, &c->vp->program.Base, &prog_data->base,
- mem_ctx, INTEL_DEBUG & DEBUG_VS);
- assembly = g.generate_assembly(&v.instructions, final_assembly_size);
+ mem_ctx, INTEL_DEBUG & DEBUG_VS, "vertex", "VS");
+ assembly = g.generate_assembly(v.cfg, final_assembly_size);
}
if (unlikely(brw->perf_debug) && shader) {
void
-brw_vec4_setup_prog_key_for_precompile(struct gl_context *ctx,
- struct brw_vec4_prog_key *key,
- GLuint id, struct gl_program *prog)
+brw_vue_setup_prog_key_for_precompile(struct gl_context *ctx,
+ struct brw_vue_prog_key *key,
+ GLuint id, struct gl_program *prog)
{
+ struct brw_context *brw = brw_context(ctx);
key->program_string_id = id;
- key->clamp_vertex_color = ctx->API == API_OPENGL_COMPAT;
+ const bool has_shader_channel_select = brw->is_haswell || brw->gen >= 8;
unsigned sampler_count = _mesa_fls(prog->SamplersUsed);
for (unsigned i = 0; i < sampler_count; i++) {
- if (prog->ShadowSamplers & (1 << i)) {
+ if (!has_shader_channel_select && (prog->ShadowSamplers & (1 << i))) {
/* Assume DEPTH_TEXTURE_MODE is the default: X, X, X, 1 */
key->tex.swizzles[i] =
MAKE_SWIZZLE4(SWIZZLE_X, SWIZZLE_X, SWIZZLE_X, SWIZZLE_ONE);