void
vec4_generator::mark_surface_used(unsigned surf_index)
{
- assert(surf_index < BRW_MAX_VS_SURFACES);
+ assert(surf_index < BRW_MAX_VEC4_SURFACES);
prog_data->binding_table_size = MAX2(prog_data->binding_table_size,
surf_index + 1);
dst,
inst->base_mrf,
src,
- SURF_INDEX_VS_TEXTURE(inst->sampler),
+ SURF_INDEX_VEC4_TEXTURE(inst->sampler),
inst->sampler,
msg_type,
1, /* response length */
BRW_SAMPLER_SIMD_MODE_SIMD4X2,
return_format);
- mark_surface_used(SURF_INDEX_VS_TEXTURE(inst->sampler));
+ mark_surface_used(SURF_INDEX_VEC4_TEXTURE(inst->sampler));
}
void
-vec4_generator::generate_urb_write(vec4_instruction *inst)
+vec4_generator::generate_vs_urb_write(vec4_instruction *inst)
{
brw_urb_WRITE(p,
brw_null_reg(), /* dest */
inst->base_mrf, /* starting mrf reg nr */
brw_vec8_grf(0, 0), /* src */
- false, /* allocate */
- true, /* used */
+ inst->urb_write_flags,
inst->mlen,
0, /* response len */
- inst->eot, /* eot */
- inst->eot, /* writes complete */
inst->offset, /* urb destination offset */
BRW_URB_SWIZZLE_INTERLEAVE);
}
+void
+vec4_generator::generate_gs_urb_write(vec4_instruction *inst)
+{
+ struct brw_reg src = brw_message_reg(inst->base_mrf);
+ brw_urb_WRITE(p,
+ brw_null_reg(), /* dest */
+ inst->base_mrf, /* starting mrf reg nr */
+ src,
+ inst->urb_write_flags,
+ inst->mlen,
+ 0, /* response len */
+ inst->offset, /* urb destination offset */
+ BRW_URB_SWIZZLE_INTERLEAVE);
+}
+
+void
+vec4_generator::generate_gs_thread_end(vec4_instruction *inst)
+{
+ struct brw_reg src = brw_message_reg(inst->base_mrf);
+ brw_urb_WRITE(p,
+ brw_null_reg(), /* dest */
+ inst->base_mrf, /* starting mrf reg nr */
+ src,
+ BRW_URB_WRITE_EOT,
+ 1, /* message len */
+ 0, /* response len */
+ 0, /* urb destination offset */
+ BRW_URB_SWIZZLE_INTERLEAVE);
+}
+
+void
+vec4_generator::generate_gs_set_write_offset(struct brw_reg dst,
+ struct brw_reg src0,
+ struct brw_reg src1)
+{
+ /* From p22 of volume 4 part 2 of the Ivy Bridge PRM (2.4.3.1 Message
+ * Header: M0.3):
+ *
+ * Slot 0 Offset. This field, after adding to the Global Offset field
+ * in the message descriptor, specifies the offset (in 256-bit units)
+ * from the start of the URB entry, as referenced by URB Handle 0, at
+ * which the data will be accessed.
+ *
+ * Similar text describes DWORD M0.4, which is slot 1 offset.
+ *
+ * Therefore, we want to multiply DWORDs 0 and 4 of src0 (the x components
+ * of the register for geometry shader invocations 0 and 1) by the
+ * immediate value in src1, and store the result in DWORDs 3 and 4 of dst.
+ *
+ * We can do this with the following EU instruction:
+ *
+ * mul(2) dst.3<1>UD src0<8;2,4>UD src1 { Align1 WE_all }
+ */
+ brw_push_insn_state(p);
+ brw_set_access_mode(p, BRW_ALIGN_1);
+ brw_set_mask_control(p, BRW_MASK_DISABLE);
+ brw_MUL(p, suboffset(stride(dst, 2, 2, 1), 3), stride(src0, 8, 2, 4),
+ src1);
+ brw_set_access_mode(p, BRW_ALIGN_16);
+ brw_pop_insn_state(p);
+}
+
+void
+vec4_generator::generate_gs_set_vertex_count(struct brw_reg dst,
+ struct brw_reg src)
+{
+ brw_push_insn_state(p);
+ brw_set_access_mode(p, BRW_ALIGN_1);
+ brw_set_mask_control(p, BRW_MASK_DISABLE);
+
+ /* If we think of the src and dst registers as composed of 8 DWORDs each,
+ * we want to pick up the contents of DWORDs 0 and 4 from src, truncate
+ * them to WORDs, and then pack them into DWORD 2 of dst.
+ *
+ * It's easier to get the EU to do this if we think of the src and dst
+ * registers as composed of 16 WORDS each; then, we want to pick up the
+ * contents of WORDs 0 and 8 from src, and pack them into WORDs 4 and 5 of
+ * dst.
+ *
+ * We can do that by the following EU instruction:
+ *
+ * mov (2) dst.4<1>:uw src<8;1,0>:uw { Align1, Q1, NoMask }
+ */
+ brw_MOV(p, suboffset(stride(retype(dst, BRW_REGISTER_TYPE_UW), 2, 2, 1), 4),
+ stride(retype(src, BRW_REGISTER_TYPE_UW), 8, 1, 0));
+ brw_set_access_mode(p, BRW_ALIGN_16);
+ brw_pop_insn_state(p);
+}
+
+void
+vec4_generator::generate_gs_set_dword_2_immed(struct brw_reg dst,
+ struct brw_reg src)
+{
+ assert(src.file == BRW_IMMEDIATE_VALUE);
+
+ brw_push_insn_state(p);
+ brw_set_access_mode(p, BRW_ALIGN_1);
+ brw_set_mask_control(p, BRW_MASK_DISABLE);
+ brw_MOV(p, suboffset(vec1(dst), 2), src);
+ brw_set_access_mode(p, BRW_ALIGN_16);
+ brw_pop_insn_state(p);
+}
+
void
vec4_generator::generate_oword_dual_block_offsets(struct brw_reg m1,
struct brw_reg index)
break;
case VS_OPCODE_URB_WRITE:
- generate_urb_write(inst);
+ generate_vs_urb_write(inst);
break;
case VS_OPCODE_SCRATCH_READ:
generate_pull_constant_load_gen7(inst, dst, src[0], src[1]);
break;
+ case GS_OPCODE_URB_WRITE:
+ generate_gs_urb_write(inst);
+ break;
+
+ case GS_OPCODE_THREAD_END:
+ generate_gs_thread_end(inst);
+ break;
+
+ case GS_OPCODE_SET_WRITE_OFFSET:
+ generate_gs_set_write_offset(dst, src[0], src[1]);
+ break;
+
+ case GS_OPCODE_SET_VERTEX_COUNT:
+ generate_gs_set_vertex_count(dst, src[0]);
+ break;
+
+ case GS_OPCODE_SET_DWORD_2_IMMED:
+ generate_gs_set_dword_2_immed(dst, src[0]);
+ break;
+
case SHADER_OPCODE_SHADER_TIME_ADD:
- brw_shader_time_add(p, src[0], SURF_INDEX_VS_SHADER_TIME);
- mark_surface_used(SURF_INDEX_VS_SHADER_TIME);
+ brw_shader_time_add(p, src[0], SURF_INDEX_VEC4_SHADER_TIME);
+ mark_surface_used(SURF_INDEX_VEC4_SHADER_TIME);
break;
case VS_OPCODE_UNPACK_FLAGS_SIMD4X2:
default:
if (inst->opcode < (int) ARRAY_SIZE(opcode_descs)) {
- _mesa_problem(ctx, "Unsupported opcode in `%s' in VS\n",
+ _mesa_problem(&brw->ctx, "Unsupported opcode in `%s' in VS\n",
opcode_descs[inst->opcode].name);
} else {
- _mesa_problem(ctx, "Unsupported opcode %d in VS", inst->opcode);
+ _mesa_problem(&brw->ctx, "Unsupported opcode %d in VS", inst->opcode);
}
abort();
}