* sizeof(float))
/** \} */
-
-/**
- * Compute masks to determine how much of draw_x and draw_y should be
- * performed using the fine adjustment of "depth coordinate offset X/Y"
- * (dw5 of 3DSTATE_DEPTH_BUFFER). See the emit_depthbuffer() function for
- * details.
- */
-void
-gen6_blorp_compute_tile_masks(const brw_blorp_params *params,
- uint32_t *tile_mask_x, uint32_t *tile_mask_y)
-{
- uint32_t depth_mask_x, depth_mask_y, hiz_mask_x, hiz_mask_y;
- intel_region_get_tile_masks(params->depth.mt->region,
- &depth_mask_x, &depth_mask_y);
- intel_region_get_tile_masks(params->depth.mt->hiz_mt->region,
- &hiz_mask_x, &hiz_mask_y);
-
- /* Each HiZ row represents 2 rows of pixels */
- hiz_mask_y = hiz_mask_y << 1 | 1;
-
- *tile_mask_x = depth_mask_x | hiz_mask_x;
- *tile_mask_y = depth_mask_y | hiz_mask_y;
-}
-
-
-void
-gen6_blorp_emit_batch_head(struct brw_context *brw,
- const brw_blorp_params *params)
-{
- struct gl_context *ctx = &brw->intel.ctx;
- struct intel_context *intel = &brw->intel;
-
- /* To ensure that the batch contains only the resolve, flush the batch
- * before beginning and after finishing emitting the resolve packets.
- *
- * Ideally, we would not need to flush for the resolve op. But, I suspect
- * that it's unsafe for CMD_PIPELINE_SELECT to occur multiple times in
- * a single batch, and there is no safe way to ensure that other than by
- * fencing the resolve with flushes. Ideally, we would just detect if
- * a batch is in progress and do the right thing, but that would require
- * the ability to *safely* access brw_context::state::dirty::brw
- * outside of the brw_upload_state() codepath.
- */
- intel_flush(ctx);
-
- /* CMD_PIPELINE_SELECT
- *
- * Select the 3D pipeline, as opposed to the media pipeline.
- */
- {
- BEGIN_BATCH(1);
- OUT_BATCH(brw->CMD_PIPELINE_SELECT << 16);
- ADVANCE_BATCH();
- }
-}
-
-
/**
* CMD_STATE_BASE_ADDRESS
*
gen6_blorp_emit_state_base_address(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
+ uint8_t mocs = brw->gen == 7 ? GEN7_MOCS_L3 : 0;
BEGIN_BATCH(10);
OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (10 - 2));
- OUT_BATCH(1); /* GeneralStateBaseAddressModifyEnable */
+ OUT_BATCH(mocs << 8 | /* GeneralStateMemoryObjectControlState */
+ mocs << 4 | /* StatelessDataPortAccessMemoryObjectControlState */
+ 1); /* GeneralStateBaseAddressModifyEnable */
+
/* SurfaceStateBaseAddress */
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0, 1);
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0, 1);
/* DynamicStateBaseAddress */
- OUT_RELOC(intel->batch.bo, (I915_GEM_DOMAIN_RENDER |
+ OUT_RELOC(brw->batch.bo, (I915_GEM_DOMAIN_RENDER |
I915_GEM_DOMAIN_INSTRUCTION), 0, 1);
OUT_BATCH(1); /* IndirectObjectBaseAddress */
if (params->use_wm_prog) {
gen6_blorp_emit_vertices(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
uint32_t vertex_offset;
/* Setup VBO for the rectangle primitive..
float *vertex_data;
const float vertices[GEN6_BLORP_VBO_SIZE] = {
- /* v0 */ 0, 0, 0, 0, params->x0, params->y1, 0, 1,
- /* v1 */ 0, 0, 0, 0, params->x1, params->y1, 0, 1,
- /* v2 */ 0, 0, 0, 0, params->x0, params->y0, 0, 1,
+ /* v0 */ 0, 0, 0, 0, (float) params->x0, (float) params->y1, 0, 1,
+ /* v1 */ 0, 0, 0, 0, (float) params->x1, (float) params->y1, 0, 1,
+ /* v2 */ 0, 0, 0, 0, (float) params->x0, (float) params->y0, 0, 1,
};
vertex_data = (float *) brw_state_batch(brw, AUB_TRACE_VERTEX_BUFFER,
uint32_t dw0 = GEN6_VB0_ACCESS_VERTEXDATA |
(GEN6_BLORP_NUM_VUE_ELEMS * sizeof(float)) << BRW_VB0_PITCH_SHIFT;
- if (intel->gen >= 7)
+ if (brw->gen >= 7)
dw0 |= GEN7_VB0_ADDRESS_MODIFYENABLE;
+ if (brw->gen == 7)
+ dw0 |= GEN7_MOCS_L3 << 16;
+
BEGIN_BATCH(batch_length);
OUT_BATCH((_3DSTATE_VERTEX_BUFFERS << 16) | (batch_length - 2));
OUT_BATCH(dw0);
/* start address */
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_VERTEX, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_VERTEX, 0,
vertex_offset);
/* end address */
- OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_VERTEX, 0,
+ OUT_RELOC(brw->batch.bo, I915_GEM_DOMAIN_VERTEX, 0,
vertex_offset + GEN6_BLORP_VBO_SIZE - 1);
OUT_BATCH(0);
ADVANCE_BATCH();
gen6_blorp_emit_urb_config(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(3);
OUT_BATCH(_3DSTATE_URB << 16 | (3 - 2));
OUT_BATCH(brw->urb.max_vs_entries << GEN6_URB_VS_ENTRIES_SHIFT);
blend->blend1.post_blend_clamp_enable = 1;
blend->blend1.clamp_range = BRW_RENDERTARGET_CLAMPRANGE_FORMAT;
- blend->blend1.write_disable_r = false;
- blend->blend1.write_disable_g = false;
- blend->blend1.write_disable_b = false;
- blend->blend1.write_disable_a = false;
+ blend->blend1.write_disable_r = params->color_write_disable[0];
+ blend->blend1.write_disable_g = params->color_write_disable[1];
+ blend->blend1.write_disable_b = params->color_write_disable[2];
+ blend->blend1.write_disable_a = params->color_write_disable[3];
return cc_blend_state_offset;
}
state->ds2.depth_write_enable = 1;
if (params->hiz_op == GEN6_HIZ_OP_DEPTH_RESOLVE) {
state->ds2.depth_test_enable = 1;
- state->ds2.depth_test_func = COMPAREFUNC_NEVER;
+ state->ds2.depth_test_func = BRW_COMPAREFUNCTION_NEVER;
}
return depthstencil_offset;
uint32_t depthstencil_offset,
uint32_t cc_state_offset)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_CC_STATE_POINTERS << 16 | (4 - 2));
OUT_BATCH(cc_blend_state_offset | 1); /* BLEND_STATE offset */
height /= 2;
}
struct intel_region *region = surface->mt->region;
+ uint32_t tile_x, tile_y;
uint32_t *surf = (uint32_t *)
brw_state_batch(brw, AUB_TRACE_SURFACE_STATE, 6 * 4, 32,
surface->brw_surfaceformat << BRW_SURFACE_FORMAT_SHIFT);
/* reloc */
- surf[1] = region->bo->offset; /* No tile offsets needed */
+ surf[1] = (surface->compute_tile_offsets(&tile_x, &tile_y) +
+ region->bo->offset64);
surf[2] = (0 << BRW_SURFACE_LOD_SHIFT |
(width - 1) << BRW_SURFACE_WIDTH_SHIFT |
uint32_t tiling = surface->map_stencil_as_y_tiled
? BRW_SURFACE_TILED | BRW_SURFACE_TILED_Y
: brw_get_surface_tiling_bits(region->tiling);
- uint32_t pitch_bytes = region->pitch * region->cpp;
+ uint32_t pitch_bytes = region->pitch;
if (surface->map_stencil_as_y_tiled)
pitch_bytes *= 2;
surf[3] = (tiling |
surf[4] = brw_get_surface_num_multisamples(surface->num_samples);
- surf[5] = (0 << BRW_SURFACE_X_OFFSET_SHIFT |
- 0 << BRW_SURFACE_Y_OFFSET_SHIFT |
+ /* Note that the low bits of these fields are missing, so
+ * there's the possibility of getting in trouble.
+ */
+ assert(tile_x % 4 == 0);
+ assert(tile_y % 2 == 0);
+ surf[5] = ((tile_x / 4) << BRW_SURFACE_X_OFFSET_SHIFT |
+ (tile_y / 2) << BRW_SURFACE_Y_OFFSET_SHIFT |
(surface->mt->align_h == 4 ?
BRW_SURFACE_VERTICAL_ALIGN_ENABLE : 0));
/* Emit relocation to surface contents */
- drm_intel_bo_emit_reloc(brw->intel.batch.bo,
+ drm_intel_bo_emit_reloc(brw->batch.bo,
wm_surf_offset + 4,
region->bo,
- surf[1] - region->bo->offset,
+ surf[1] - region->bo->offset64,
read_domains, write_domain);
return wm_surf_offset;
sampler->ss0.min_mag_neq = 1;
- /* Set LOD bias:
+ /* Set LOD bias:
*/
sampler->ss0.lod_bias = 0;
sampler->ss0.lod_preclamp = 1; /* OpenGL mode */
sampler->ss0.default_color_mode = 0; /* OpenGL/DX10 mode */
- /* Set BaseMipLevel, MaxLOD, MinLOD:
+ /* Set BaseMipLevel, MaxLOD, MinLOD:
*
* XXX: I don't think that using firstLevel, lastLevel works,
* because we always setup the surface state as if firstLevel ==
const brw_blorp_params *params,
uint32_t sampler_offset)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_SAMPLER_STATE_POINTERS << 16 |
VS_SAMPLER_STATE_CHANGE |
gen6_blorp_emit_vs_disable(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
- if (intel->gen == 6) {
- /* From the BSpec, Volume 2a, Part 3 "Vertex Shader", Section
+ if (brw->gen == 6) {
+ /* From the BSpec, 3D Pipeline > Geometry > Vertex Shader > State,
* 3DSTATE_VS, Dword 5.0 "VS Function Enable":
*
* [DevSNB] A pipeline flush must be programmed prior to a
* toggle. Pipeline flush can be executed by sending a PIPE_CONTROL
* command with CS stall bit set and a post sync operation.
*/
- intel_emit_post_sync_nonzero_flush(intel);
+ intel_emit_post_sync_nonzero_flush(brw);
}
+ /* Disable the push constant buffers. */
+ BEGIN_BATCH(5);
+ OUT_BATCH(_3DSTATE_CONSTANT_VS << 16 | (5 - 2));
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ ADVANCE_BATCH();
+
BEGIN_BATCH(6);
OUT_BATCH(_3DSTATE_VS << 16 | (6 - 2));
OUT_BATCH(0);
gen6_blorp_emit_gs_disable(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
+ /* Disable all the constant buffers. */
+ BEGIN_BATCH(5);
+ OUT_BATCH(_3DSTATE_CONSTANT_GS << 16 | (5 - 2));
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ ADVANCE_BATCH();
BEGIN_BATCH(7);
OUT_BATCH(_3DSTATE_GS << 16 | (7 - 2));
gen6_blorp_emit_clip_disable(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_CLIP << 16 | (4 - 2));
OUT_BATCH(0);
gen6_blorp_emit_sf_config(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(20);
OUT_BATCH(_3DSTATE_SF << 16 | (20 - 2));
OUT_BATCH((1 - 1) << GEN6_SF_NUM_OUTPUTS_SHIFT | /* only position */
1 << GEN6_SF_URB_ENTRY_READ_LENGTH_SHIFT |
0 << GEN6_SF_URB_ENTRY_READ_OFFSET_SHIFT);
OUT_BATCH(0); /* dw2 */
- OUT_BATCH(params->num_samples > 1 ? GEN6_SF_MSRAST_ON_PATTERN : 0);
+ OUT_BATCH(params->dst.num_samples > 1 ? GEN6_SF_MSRAST_ON_PATTERN : 0);
for (int i = 0; i < 16; ++i)
OUT_BATCH(0);
ADVANCE_BATCH();
uint32_t prog_offset,
brw_blorp_prog_data *prog_data)
{
- struct intel_context *intel = &brw->intel;
uint32_t dw2, dw4, dw5, dw6;
/* Even when thread dispatch is disabled, max threads (dw5.25:31) must be
- * nonzero to prevent the GPU from hanging. See the valid ranges in the
- * BSpec, Volume 2a.11 Windower, Section 3DSTATE_WM, Dword 5.25:31
- * "Maximum Number Of Threads".
+ * nonzero to prevent the GPU from hanging. While the documentation doesn't
+ * mention this explicitly, it notes that the valid range for the field is
+ * [1,39] = [2,40] threads, which excludes zero.
*
* To be safe (and to minimize extraneous code) we go ahead and fully
* configure the WM state whether or not there is a WM program.
assert(0);
break;
}
- dw4 |= GEN6_WM_STATISTICS_ENABLE;
dw5 |= GEN6_WM_LINE_AA_WIDTH_1_0;
dw5 |= GEN6_WM_LINE_END_CAP_AA_WIDTH_0_5;
dw5 |= (brw->max_wm_threads - 1) << GEN6_WM_MAX_THREADS_SHIFT;
dw5 |= GEN6_WM_DISPATCH_ENABLE; /* We are rendering */
}
- if (params->num_samples > 1) {
+ if (params->dst.num_samples > 1) {
dw6 |= GEN6_WM_MSRAST_ON_PATTERN;
if (prog_data && prog_data->persample_msaa_dispatch)
dw6 |= GEN6_WM_MSDISPMODE_PERSAMPLE;
const brw_blorp_params *params,
uint32_t wm_push_const_offset)
{
- struct intel_context *intel = &brw->intel;
-
/* Make sure the push constants fill an exact integer number of
* registers.
*/
ADVANCE_BATCH();
}
+static void
+gen6_blorp_emit_constant_ps_disable(struct brw_context *brw,
+ const brw_blorp_params *params)
+{
+ /* Disable the push constant buffers. */
+ BEGIN_BATCH(5);
+ OUT_BATCH(_3DSTATE_CONSTANT_PS << 16 | (5 - 2));
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ ADVANCE_BATCH();
+}
/**
* 3DSTATE_BINDING_TABLE_POINTERS
const brw_blorp_params *params,
uint32_t wm_bind_bo_offset)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_BINDING_TABLE_POINTERS << 16 |
GEN6_BINDING_TABLE_MODIFY_PS |
gen6_blorp_emit_depth_stencil_config(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
+ struct gl_context *ctx = &brw->ctx;
uint32_t draw_x = params->depth.x_offset;
uint32_t draw_y = params->depth.y_offset;
uint32_t tile_mask_x, tile_mask_y;
- gen6_blorp_compute_tile_masks(params, &tile_mask_x, &tile_mask_y);
+ brw_get_depthstencil_tile_masks(params->depth.mt,
+ params->depth.level,
+ params->depth.layer,
+ NULL,
+ &tile_mask_x, &tile_mask_y);
/* 3DSTATE_DEPTH_BUFFER */
{
uint32_t offset =
intel_region_get_aligned_offset(params->depth.mt->region,
draw_x & ~tile_mask_x,
- draw_y & ~tile_mask_y);
+ draw_y & ~tile_mask_y, false);
/* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
* (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
* tile_x and tile_y to 0. This is a temporary workaround until we come
* up with a better solution.
*/
+ WARN_ONCE((tile_x & 7) || (tile_y & 7),
+ "Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
+ "Truncating offset, bad rendering may occur.\n");
tile_x &= ~7;
tile_y &= ~7;
- intel_emit_post_sync_nonzero_flush(intel);
- intel_emit_depth_stall_flushes(intel);
+ intel_emit_post_sync_nonzero_flush(brw);
+ intel_emit_depth_stall_flushes(brw);
BEGIN_BATCH(7);
OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (7 - 2));
- uint32_t pitch_bytes =
- params->depth.mt->region->pitch * params->depth.mt->region->cpp;
- OUT_BATCH((pitch_bytes - 1) |
+ OUT_BATCH((params->depth.mt->region->pitch - 1) |
params->depth_format << 18 |
1 << 21 | /* separate stencil enable */
1 << 22 | /* hiz enable */
uint32_t hiz_offset =
intel_region_get_aligned_offset(hiz_region,
draw_x & ~tile_mask_x,
- (draw_y & ~tile_mask_y) / 2);
+ (draw_y & ~tile_mask_y) / 2, false);
BEGIN_BATCH(3);
OUT_BATCH((_3DSTATE_HIER_DEPTH_BUFFER << 16) | (3 - 2));
- OUT_BATCH(hiz_region->pitch * hiz_region->cpp - 1);
+ OUT_BATCH(hiz_region->pitch - 1);
OUT_RELOC(hiz_region->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
hiz_offset);
gen6_blorp_emit_depth_disable(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
+ intel_emit_post_sync_nonzero_flush(brw);
+ intel_emit_depth_stall_flushes(brw);
BEGIN_BATCH(7);
OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (7 - 2));
OUT_BATCH(0);
OUT_BATCH(0);
ADVANCE_BATCH();
+
+ BEGIN_BATCH(3);
+ OUT_BATCH(_3DSTATE_HIER_DEPTH_BUFFER << 16 | (3 - 2));
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ ADVANCE_BATCH();
+
+ BEGIN_BATCH(3);
+ OUT_BATCH(_3DSTATE_STENCIL_BUFFER << 16 | (3 - 2));
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ ADVANCE_BATCH();
}
gen6_blorp_emit_clear_params(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(2);
OUT_BATCH(_3DSTATE_CLEAR_PARAMS << 16 |
GEN5_DEPTH_CLEAR_VALID |
gen6_blorp_emit_drawing_rectangle(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
+ if (brw->gen == 6)
+ intel_emit_post_sync_nonzero_flush(brw);
BEGIN_BATCH(4);
OUT_BATCH(_3DSTATE_DRAWING_RECTANGLE << 16 | (4 - 2));
gen6_blorp_emit_viewport_state(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
struct brw_cc_viewport *ccv;
uint32_t cc_vp_offset;
gen6_blorp_emit_primitive(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct intel_context *intel = &brw->intel;
-
BEGIN_BATCH(6);
OUT_BATCH(CMD_3D_PRIM << 16 | (6 - 2) |
_3DPRIM_RECTLIST << GEN4_3DPRIM_TOPOLOGY_TYPE_SHIFT |
OUT_BATCH(0);
OUT_BATCH(0);
ADVANCE_BATCH();
-}
+ /* Only used on Sandybridge; harmless to set elsewhere. */
+ brw->batch.need_workaround_flush = true;
+}
/**
* \brief Execute a blit or render pass operation.
* This function alters no GL state.
*/
void
-gen6_blorp_exec(struct intel_context *intel,
+gen6_blorp_exec(struct brw_context *brw,
const brw_blorp_params *params)
{
- struct gl_context *ctx = &intel->ctx;
- struct brw_context *brw = brw_context(ctx);
brw_blorp_prog_data *prog_data = NULL;
uint32_t cc_blend_state_offset = 0;
uint32_t cc_state_offset = 0;
uint32_t wm_bind_bo_offset = 0;
uint32_t prog_offset = params->get_wm_prog(brw, &prog_data);
- gen6_blorp_emit_batch_head(brw, params);
- gen6_emit_3dstate_multisample(brw, params->num_samples);
- gen6_emit_3dstate_sample_mask(brw, params->num_samples, 1.0, false);
+
+ /* Emit workaround flushes when we switch from drawing to blorping. */
+ brw->batch.need_workaround_flush = true;
+
+ gen6_emit_3dstate_multisample(brw, params->dst.num_samples);
+ gen6_emit_3dstate_sample_mask(brw,
+ params->dst.num_samples > 1 ?
+ (1 << params->dst.num_samples) - 1 : 1);
gen6_blorp_emit_state_base_address(brw, params);
gen6_blorp_emit_vertices(brw, params);
gen6_blorp_emit_urb_config(brw, params);
depthstencil_offset, cc_state_offset);
if (params->use_wm_prog) {
uint32_t wm_surf_offset_renderbuffer;
- uint32_t wm_surf_offset_texture;
+ uint32_t wm_surf_offset_texture = 0;
uint32_t sampler_offset;
wm_push_const_offset = gen6_blorp_emit_wm_constants(brw, params);
+ intel_miptree_used_for_rendering(params->dst.mt);
wm_surf_offset_renderbuffer =
gen6_blorp_emit_surface_state(brw, params, ¶ms->dst,
I915_GEM_DOMAIN_RENDER,
I915_GEM_DOMAIN_RENDER);
- wm_surf_offset_texture =
- gen6_blorp_emit_surface_state(brw, params, ¶ms->src,
- I915_GEM_DOMAIN_SAMPLER, 0);
+ if (params->src.mt) {
+ wm_surf_offset_texture =
+ gen6_blorp_emit_surface_state(brw, params, ¶ms->src,
+ I915_GEM_DOMAIN_SAMPLER, 0);
+ }
wm_bind_bo_offset =
gen6_blorp_emit_binding_table(brw, params,
wm_surf_offset_renderbuffer,
gen6_blorp_emit_sf_config(brw, params);
if (params->use_wm_prog)
gen6_blorp_emit_constant_ps(brw, params, wm_push_const_offset);
+ else
+ gen6_blorp_emit_constant_ps_disable(brw, params);
gen6_blorp_emit_wm_config(brw, params, prog_offset, prog_data);
if (params->use_wm_prog)
gen6_blorp_emit_binding_table_pointers(brw, params, wm_bind_bo_offset);
gen6_blorp_emit_clear_params(brw, params);
gen6_blorp_emit_drawing_rectangle(brw, params);
gen6_blorp_emit_primitive(brw, params);
-
- /* See comments above at first invocation of intel_flush() in
- * gen6_blorp_emit_batch_head().
- */
- intel_flush(ctx);
-
- /* Be safe. */
- brw->state.dirty.brw = ~0;
- brw->state.dirty.cache = ~0;
}
projects / mesa.git / blobdiff