struct intel_resolve_map;
struct intel_texture_image;
+/**
+ * When calling intel_miptree_map() on an ETC-transcoded-to-RGB miptree or a
+ * depthstencil-split-to-separate-stencil miptree, we'll normally make a
+ * tmeporary and recreate the kind of data requested by Mesa core, since we're
+ * satisfying some glGetTexImage() request or something.
+ *
+ * However, occasionally you want to actually map the miptree's current data
+ * without transcoding back. This flag to intel_miptree_map() gets you that.
+ */
+#define BRW_MAP_DIRECT_BIT 0x80000000
+
struct intel_miptree_map {
/** Bitfield of GL_MAP_READ_BIT, GL_MAP_WRITE_BIT, GL_MAP_INVALIDATE_BIT */
GLbitfield mode;
void *ptr;
/** Stride of the mapping. */
int stride;
+
+ /**
+ * intel_mipmap_tree::singlesample_mt is temporary storage that persists
+ * only for the duration of the map.
+ */
+ bool singlesample_mt_is_tmp;
};
/**
/** \} */
/**
- * Pointer to mapping information, present across
- * intel_tex_image_map()/unmap of the slice.
+ * Mapping information. Persistent for the duration of
+ * intel_miptree_map/unmap on this slice.
*/
struct intel_miptree_map *map;
+
+ /**
+ * \brief Is HiZ enabled for this slice?
+ *
+ * If \c mt->level[l].slice[s].has_hiz is set, then (1) \c mt->hiz_mt
+ * has been allocated and (2) the HiZ memory corresponding to this slice
+ * resides at \c mt->hiz_mt->level[l].slice[s].
+ */
+ bool has_hiz;
} *slice;
};
+/**
+ * Enum for keeping track of the different MSAA layouts supported by Gen7.
+ */
+enum intel_msaa_layout
+{
+ /**
+ * Ordinary surface with no MSAA.
+ */
+ INTEL_MSAA_LAYOUT_NONE,
+
+ /**
+ * Interleaved Multisample Surface. The additional samples are
+ * accommodated by scaling up the width and the height of the surface so
+ * that all the samples corresponding to a pixel are located at nearby
+ * memory locations.
+ */
+ INTEL_MSAA_LAYOUT_IMS,
+
+ /**
+ * Uncompressed Multisample Surface. The surface is stored as a 2D array,
+ * with array slice n containing all pixel data for sample n.
+ */
+ INTEL_MSAA_LAYOUT_UMS,
+
+ /**
+ * Compressed Multisample Surface. The surface is stored as in
+ * INTEL_MSAA_LAYOUT_UMS, but there is an additional buffer called the MCS
+ * (Multisample Control Surface) buffer. Each pixel in the MCS buffer
+ * indicates the mapping from sample number to array slice. This allows
+ * the common case (where all samples constituting a pixel have the same
+ * color value) to be stored efficiently by just using a single array
+ * slice.
+ */
+ INTEL_MSAA_LAYOUT_CMS,
+};
+
struct intel_mipmap_tree
{
/* Effectively the key:
* MESA_FORMAT_Z32_FLOAT_X24S8, then mt->format will be
* MESA_FORMAT_Z32_FLOAT, otherwise for MESA_FORMAT_S8_Z24 objects it will be
* MESA_FORMAT_X8_Z24.
+ *
+ * For ETC1/ETC2 textures, this is one of the uncompressed mesa texture
+ * formats if the hardware lacks support for ETC1/ETC2. See @ref wraps_etc.
*/
gl_format format;
+ /** This variable stores the value of ETC compressed texture format */
+ gl_format etc_format;
+
/**
* The X offset of each image in the miptree must be aligned to this. See
* the "Alignment Unit Size" section of the BSpec.
GLuint first_level;
GLuint last_level;
- GLuint width0, height0, depth0; /**< Level zero image dimensions */
+ /**
+ * Level zero image dimensions. These dimensions correspond to the
+ * physical layout of data in memory. Accordingly, they account for the
+ * extra width, height, and or depth that must be allocated in order to
+ * accommodate multisample formats, and they account for the extra factor
+ * of 6 in depth that must be allocated in order to accommodate cubemap
+ * textures.
+ */
+ GLuint physical_width0, physical_height0, physical_depth0;
+
GLuint cpp;
GLuint num_samples;
bool compressed;
+ /**
+ * Level zero image dimensions. These dimensions correspond to the
+ * logical width, height, and depth of the region as seen by client code.
+ * Accordingly, they do not account for the extra width, height, and/or
+ * depth that must be allocated in order to accommodate multisample
+ * formats, nor do they account for the extra factor of 6 in depth that
+ * must be allocated in order to accommodate cubemap textures.
+ */
+ uint32_t logical_width0, logical_height0, logical_depth0;
+
+ /**
+ * For 1D array, 2D array, cube, and 2D multisampled surfaces on Gen7: true
+ * if the surface only contains LOD 0, and hence no space is for LOD's
+ * other than 0 in between array slices.
+ *
+ * Corresponds to the surface_array_spacing bit in gen7_surface_state.
+ */
+ bool array_spacing_lod0;
+
+ /**
+ * MSAA layout used by this buffer.
+ */
+ enum intel_msaa_layout msaa_layout;
+
/* Derived from the above:
*/
GLuint total_width;
*/
struct intel_region *region;
+ /* Offset into region bo where miptree starts:
+ */
+ uint32_t offset;
+
+ /**
+ * \brief Singlesample miptree.
+ *
+ * This is used under two cases.
+ *
+ * --- Case 1: As persistent singlesample storage for multisample window
+ * system front and back buffers ---
+ *
+ * Suppose that the window system FBO was created with a multisample
+ * config. Let `back_irb` be the `intel_renderbuffer` for the FBO's back
+ * buffer. Then `back_irb` contains two miptrees: a parent multisample
+ * miptree (back_irb->mt) and a child singlesample miptree
+ * (back_irb->mt->singlesample_mt). The DRM buffer shared with DRI2
+ * belongs to `back_irb->mt->singlesample_mt` and contains singlesample
+ * data. The singlesample miptree is created at the same time as and
+ * persists for the lifetime of its parent multisample miptree.
+ *
+ * When access to the singlesample data is needed, such as at
+ * eglSwapBuffers and glReadPixels, an automatic downsample occurs from
+ * `back_rb->mt` to `back_rb->mt->singlesample_mt` when necessary.
+ *
+ * This description of the back buffer applies analogously to the front
+ * buffer.
+ *
+ *
+ * --- Case 2: As temporary singlesample storage for mapping multisample
+ * miptrees ---
+ *
+ * Suppose the intel_miptree_map is called on a multisample miptree, `mt`,
+ * for which case 1 does not apply (that is, `mt` does not belong to
+ * a front or back buffer). Then `mt->singlesample_mt` is null at the
+ * start of the call. intel_miptree_map will create a temporary
+ * singlesample miptree, store it at `mt->singlesample_mt`, downsample from
+ * `mt` to `mt->singlesample_mt` if necessary, then map
+ * `mt->singlesample_mt`. The temporary miptree is later deleted during
+ * intel_miptree_unmap.
+ */
+ struct intel_mipmap_tree *singlesample_mt;
+
+ /**
+ * \brief A downsample is needed from this miptree to singlesample_mt.
+ */
+ bool need_downsample;
+
/**
* \brief HiZ miptree
*
- * This is non-null only if HiZ is enabled for this miptree.
+ * The hiz miptree contains the miptree's hiz buffer. To allocate the hiz
+ * miptree, use intel_miptree_alloc_hiz().
*
- * \see intel_miptree_alloc_hiz()
+ * To determine if hiz is enabled, do not check this pointer. Instead, use
+ * intel_miptree_slice_has_hiz().
*/
struct intel_mipmap_tree *hiz_mt;
*/
struct intel_mipmap_tree *stencil_mt;
+ /**
+ * \brief MCS miptree for multisampled textures.
+ *
+ * This miptree contains the "multisample control surface", which stores
+ * the necessary information to implement compressed MSAA on Gen7+
+ * (INTEL_MSAA_FORMAT_CMS).
+ */
+ struct intel_mipmap_tree *mcs_mt;
+
/* These are also refcounted:
*/
GLuint refcount;
GLuint height0,
GLuint depth0,
bool expect_accelerated_upload,
- GLuint num_samples);
+ GLuint num_samples,
+ bool force_y_tiling);
+
+struct intel_mipmap_tree *
+intel_miptree_create_layout(struct intel_context *intel,
+ GLenum target,
+ gl_format format,
+ GLuint first_level,
+ GLuint last_level,
+ GLuint width0,
+ GLuint height0,
+ GLuint depth0,
+ bool for_region,
+ GLuint num_samples);
struct intel_mipmap_tree *
intel_miptree_create_for_region(struct intel_context *intel,
gl_format format,
struct intel_region *region);
+struct intel_mipmap_tree*
+intel_miptree_create_for_dri2_buffer(struct intel_context *intel,
+ unsigned dri_attachment,
+ gl_format format,
+ uint32_t num_samples,
+ struct intel_region *region);
+
/**
* Create a miptree appropriate as the storage for a non-texture renderbuffer.
* The miptree has the following properties:
void
intel_miptree_get_image_offset(struct intel_mipmap_tree *mt,
- GLuint level, GLuint face, GLuint depth,
+ GLuint level, GLuint slice,
GLuint *x, GLuint *y);
void
intel_miptree_get_dimensions_for_image(struct gl_texture_image *image,
int *width, int *height, int *depth);
+void
+intel_miptree_get_tile_offsets(struct intel_mipmap_tree *mt,
+ GLuint level, GLuint slice,
+ uint32_t *tile_x,
+ uint32_t *tile_y);
+
void intel_miptree_set_level_info(struct intel_mipmap_tree *mt,
GLuint level,
GLuint x, GLuint y,
void
intel_miptree_copy_teximage(struct intel_context *intel,
struct intel_texture_image *intelImage,
- struct intel_mipmap_tree *dst_mt);
+ struct intel_mipmap_tree *dst_mt, bool invalidate);
/**
* Copy the stencil data from \c mt->stencil_mt->region to \c mt->region for
uint32_t level,
uint32_t layer);
+bool
+intel_miptree_alloc_mcs(struct intel_context *intel,
+ struct intel_mipmap_tree *mt,
+ GLuint num_samples);
+
/**
* \name Miptree HiZ functions
* \{
bool
intel_miptree_alloc_hiz(struct intel_context *intel,
- struct intel_mipmap_tree *mt,
- GLuint num_samples);
+ struct intel_mipmap_tree *mt);
+
+bool
+intel_miptree_slice_has_hiz(struct intel_mipmap_tree *mt,
+ uint32_t level,
+ uint32_t layer);
void
intel_miptree_slice_set_needs_hiz_resolve(struct intel_mipmap_tree *mt,
intel_miptree_slice_set_needs_depth_resolve(struct intel_mipmap_tree *mt,
uint32_t level,
uint32_t depth);
-void
-intel_miptree_all_slices_set_need_hiz_resolve(struct intel_mipmap_tree *mt);
-
-void
-intel_miptree_all_slices_set_need_depth_resolve(struct intel_mipmap_tree *mt);
/**
* \return false if no resolve was needed
/**\}*/
+void
+intel_miptree_downsample(struct intel_context *intel,
+ struct intel_mipmap_tree *mt);
+
+void
+intel_miptree_upsample(struct intel_context *intel,
+ struct intel_mipmap_tree *mt);
+
/* i915_mipmap_tree.c:
*/
void i915_miptree_layout(struct intel_mipmap_tree *mt);
void brw_miptree_layout(struct intel_context *intel,
struct intel_mipmap_tree *mt);
+void *intel_miptree_map_raw(struct intel_context *intel,
+ struct intel_mipmap_tree *mt);
+
+void intel_miptree_unmap_raw(struct intel_context *intel,
+ struct intel_mipmap_tree *mt);
+
void
intel_miptree_map(struct intel_context *intel,
struct intel_mipmap_tree *mt,