#include "utils.h"
#include "vblank.h"
-#ifndef _SOLO
#include "GL/internal/dri_interface.h"
-#endif
/* R200 configuration
*/
DRI_CONF_FTHROTTLE_MODE(DRI_CONF_FTHROTTLE_IRQS)
DRI_CONF_VBLANK_MODE(DRI_CONF_VBLANK_DEF_INTERVAL_0)
DRI_CONF_MAX_TEXTURE_UNITS(4,2,6)
+ DRI_CONF_HYPERZ(false)
DRI_CONF_SECTION_END
DRI_CONF_SECTION_QUALITY
DRI_CONF_TEXTURE_DEPTH(DRI_CONF_TEXTURE_DEPTH_FB)
DRI_CONF_DEF_MAX_ANISOTROPY(1.0,"1.0,2.0,4.0,8.0,16.0")
DRI_CONF_NO_NEG_LOD_BIAS(false)
+ DRI_CONF_FORCE_S3TC_ENABLE(false)
DRI_CONF_COLOR_REDUCTION(DRI_CONF_COLOR_REDUCTION_DITHER)
DRI_CONF_ROUND_MODE(DRI_CONF_ROUND_TRUNC)
DRI_CONF_DITHER_MODE(DRI_CONF_DITHER_XERRORDIFF)
DRI_CONF_SECTION_DEBUG
DRI_CONF_NO_RAST(false)
DRI_CONF_SECTION_END
+ DRI_CONF_SECTION_SOFTWARE
+ DRI_CONF_ARB_VERTEX_PROGRAM(true)
+ DRI_CONF_NV_VERTEX_PROGRAM(false)
+ DRI_CONF_SECTION_END
DRI_CONF_END;
-static const GLuint __driNConfigOptions = 11;
+static const GLuint __driNConfigOptions = 15;
#if 1
/* Including xf86PciInfo.h introduces a bunch of errors...
#define PCI_CHIP_R200_QG 0x5147
#define PCI_CHIP_R200_QY 0x5159
#define PCI_CHIP_R200_QZ 0x515A
-#define PCI_CHIP_R200_LW 0x4C57
+#define PCI_CHIP_R200_LW 0x4C57
+#define PCI_CHIP_R200_LX 0x4C58
#define PCI_CHIP_R200_LY 0x4C59
#define PCI_CHIP_R200_LZ 0x4C5A
#define PCI_CHIP_RV200_QW 0x5157 /* Radeon 7500 - not an R200 at all */
#define PCI_CHIP_R200_QM 0x514D
#define PCI_CHIP_R200_QN 0x514E
#define PCI_CHIP_R200_QO 0x514F /* r200 (non-derived) end */
-/* are the R200 Qh (0x5168) and following needed too? They are not in xf86PciInfo.h
- but in the pci database. Maybe just secondary ports or something ? */
+/* are the R200 Qh (0x5168) and following needed too? They are not in
+ xf86PciInfo.h but in the pci database. Maybe just secondary ports or
+ something ? Ah well, better be safe than sorry */
+#define PCI_CHIP_R200_Qh 0x5168
+#define PCI_CHIP_R200_Qi 0x5169
+#define PCI_CHIP_R200_Qj 0x516A
+#define PCI_CHIP_R200_Qk 0x516B
+#define PCI_CHIP_R200_Ql 0x516C
#endif
static int getSwapInfo( __DRIdrawablePrivate *dPriv, __DRIswapInfo * sInfo );
-#ifdef USE_NEW_INTERFACE
-static __GLcontextModes * fill_in_modes( __GLcontextModes * modes,
- unsigned pixel_bits,
- unsigned depth_bits,
- unsigned stencil_bits,
- const GLenum * db_modes,
- unsigned num_db_modes,
- int visType )
-{
- static const uint8_t bits[2][4] = {
- { 5, 6, 5, 0 },
- { 8, 8, 8, 8 }
- };
-
- static const uint32_t masks[2][4] = {
- { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 },
- { 0x00FF0000, 0x0000FF00, 0x000000FF, 0xFF000000 }
- };
-
- unsigned i;
- unsigned j;
- const unsigned index = ((pixel_bits + 15) / 16) - 1;
-
- for ( i = 0 ; i < num_db_modes ; i++ ) {
- for ( j = 0 ; j < 2 ; j++ ) {
-
- modes->redBits = bits[index][0];
- modes->greenBits = bits[index][1];
- modes->blueBits = bits[index][2];
- modes->alphaBits = bits[index][3];
- modes->redMask = masks[index][0];
- modes->greenMask = masks[index][1];
- modes->blueMask = masks[index][2];
- modes->alphaMask = masks[index][3];
- modes->rgbBits = modes->redBits + modes->greenBits
- + modes->blueBits + modes->alphaBits;
-
- modes->accumRedBits = 16 * j;
- modes->accumGreenBits = 16 * j;
- modes->accumBlueBits = 16 * j;
- modes->accumAlphaBits = (masks[index][3] != 0) ? 16 * j : 0;
- modes->visualRating = (j == 0) ? GLX_NONE : GLX_SLOW_CONFIG;
-
- modes->stencilBits = stencil_bits;
- modes->depthBits = depth_bits;
-
- modes->visualType = visType;
- modes->renderType = GLX_RGBA_BIT;
- modes->drawableType = GLX_WINDOW_BIT;
- modes->rgbMode = GL_TRUE;
-
- if ( db_modes[i] == GLX_NONE ) {
- modes->doubleBufferMode = GL_FALSE;
- }
- else {
- modes->doubleBufferMode = GL_TRUE;
- modes->swapMethod = db_modes[i];
- }
-
- modes = modes->next;
- }
- }
-
- return modes;
-}
-#endif /* USE_NEW_INTERFACE */
-
-
#ifdef USE_NEW_INTERFACE
static __GLcontextModes *
r200FillInModes( unsigned pixel_bits, unsigned depth_bits,
unsigned num_modes;
unsigned depth_buffer_factor;
unsigned back_buffer_factor;
- unsigned i;
+ GLenum fb_format;
+ GLenum fb_type;
/* Right now GLX_SWAP_COPY_OML isn't supported, but it would be easy
* enough to add support. Basically, if a context is created with an
GLX_NONE, GLX_SWAP_UNDEFINED_OML /*, GLX_SWAP_COPY_OML */
};
- int depth_buffer_modes[2][2];
+ u_int8_t depth_bits_array[2];
+ u_int8_t stencil_bits_array[2];
- depth_buffer_modes[0][0] = depth_bits;
- depth_buffer_modes[1][0] = depth_bits;
+ depth_bits_array[0] = depth_bits;
+ depth_bits_array[1] = depth_bits;
/* Just like with the accumulation buffer, always provide some modes
* with a stencil buffer. It will be a sw fallback, but some apps won't
* care about that.
*/
- depth_buffer_modes[0][1] = 0;
- depth_buffer_modes[1][1] = (stencil_bits == 0) ? 8 : stencil_bits;
+ stencil_bits_array[0] = 0;
+ stencil_bits_array[1] = (stencil_bits == 0) ? 8 : stencil_bits;
depth_buffer_factor = ((depth_bits != 0) || (stencil_bits != 0)) ? 2 : 1;
back_buffer_factor = (have_back_buffer) ? 2 : 1;
num_modes = depth_buffer_factor * back_buffer_factor * 4;
+ if ( pixel_bits == 16 ) {
+ fb_format = GL_RGB;
+ fb_type = GL_UNSIGNED_SHORT_5_6_5;
+ }
+ else {
+ fb_format = GL_BGRA;
+ fb_type = GL_UNSIGNED_INT_8_8_8_8_REV;
+ }
+
modes = (*create_context_modes)( num_modes, sizeof( __GLcontextModes ) );
m = modes;
- for ( i = 0 ; i < depth_buffer_factor ; i++ ) {
- m = fill_in_modes( m, pixel_bits,
- depth_buffer_modes[i][0], depth_buffer_modes[i][1],
+ if ( ! driFillInModes( & m, fb_format, fb_type,
+ depth_bits_array, stencil_bits_array, depth_buffer_factor,
back_buffer_modes, back_buffer_factor,
- GLX_TRUE_COLOR );
+ GLX_TRUE_COLOR ) ) {
+ fprintf( stderr, "[%s:%u] Error creating FBConfig!\n",
+ __func__, __LINE__ );
+ return NULL;
}
- for ( i = 0 ; i < depth_buffer_factor ; i++ ) {
- m = fill_in_modes( m, pixel_bits,
- depth_buffer_modes[i][0], depth_buffer_modes[i][1],
+ if ( ! driFillInModes( & m, fb_format, fb_type,
+ depth_bits_array, stencil_bits_array, depth_buffer_factor,
back_buffer_modes, back_buffer_factor,
- GLX_DIRECT_COLOR );
+ GLX_DIRECT_COLOR ) ) {
+ fprintf( stderr, "[%s:%u] Error creating FBConfig!\n",
+ __func__, __LINE__ );
+ return NULL;
}
/* Mark the visual as slow if there are "fake" stencil bits.
case PCI_CHIP_RV200_QW:
case PCI_CHIP_RV200_QX:
case PCI_CHIP_R200_LW:
+ case PCI_CHIP_R200_LX:
case PCI_CHIP_R200_LY:
case PCI_CHIP_R200_LZ:
case PCI_CHIP_RS100_4136:
case PCI_CHIP_R200_QM:
case PCI_CHIP_R200_QN:
case PCI_CHIP_R200_QO:
+ case PCI_CHIP_R200_Qh:
+ case PCI_CHIP_R200_Qi:
+ case PCI_CHIP_R200_Qj:
+ case PCI_CHIP_R200_Qk:
+ case PCI_CHIP_R200_Ql:
screen->chipset |= R200_CHIPSET_REAL_R200;
/* fallthrough */
default:
__driUtilMessage("%s: drmMap (2) failed\n", __FUNCTION__ );
return NULL;
}
- screen->scratch = (__volatile__ uint32_t *)
+ screen->scratch = (__volatile__ u_int32_t *)
((GLubyte *)screen->status.map + RADEON_SCRATCH_REG_OFFSET);
screen->buffers = drmMapBufs( sPriv->fd );
screen->driScreen = sPriv;
screen->sarea_priv_offset = dri_priv->sarea_priv_offset;
-#ifndef _SOLO
+
if ( driCompareGLXAPIVersion( 20030813 ) >= 0 ) {
PFNGLXSCRENABLEEXTENSIONPROC glx_enable_extension =
(PFNGLXSCRENABLEEXTENSIONPROC) glXGetProcAddress( (const GLubyte *) "__glXScrEnableExtension" );
}
}
}
-#endif
return screen;
}
*
*/
#if !defined(DRI_NEW_INTERFACE_ONLY)
-#ifndef _SOLO
void *__driCreateScreen(Display *dpy, int scrn, __DRIscreen *psc,
int numConfigs, __GLXvisualConfig *config)
{
psp = __driUtilCreateScreen(dpy, scrn, psc, numConfigs, config, &r200API);
return (void *) psp;
}
-#else
-void *__driCreateScreen(struct DRIDriverRec *driver,
- struct DRIDriverContextRec *driverContext)
-{
- __DRIscreenPrivate *psp;
- psp = __driUtilCreateScreen(driver, driverContext, &r200API);
- return (void *) psp;
-}
-#endif
#endif /* !defined(DRI_NEW_INTERFACE_ONLY) */