#define R300_SE_VPORT_ZSCALE 0x1DA8
#define R300_SE_VPORT_ZOFFSET 0x1DAC
-
+#define R300_VAP_PORT_IDX0 0x2040
/*
* Vertex Array Processing (VAP) Control
- * Stolen from r200 code from Christoph Brill (It's a guess!)
*/
#define R300_VAP_CNTL 0x2080
+# define R300_PVS_NUM_SLOTS_SHIFT 0
+# define R300_PVS_NUM_CNTLRS_SHIFT 4
+# define R300_PVS_NUM_FPUS_SHIFT 8
+# define R300_VF_MAX_VTX_NUM_SHIFT 18
+# define R300_GL_CLIP_SPACE_DEF (0 << 22)
+# define R300_DX_CLIP_SPACE_DEF (1 << 22)
+# define R500_TCL_STATE_OPTIMIZATION (1 << 23)
/* This register is written directly and also starts data section
* in many 3d CP_PACKET3's
/* number of vertices */
# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16
+#define R500_VAP_INDEX_OFFSET 0x208c
+
#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090
# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0)
# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT (1<<1)
# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15
# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18
# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21
-# define R300_VAP_OUTPUT_VTX_FMT_1__NOT_PRESENT (1<<0)
-# define R300_VAP_OUTPUT_VTX_FMT_1__1_COMPONENT (1<<1)
-# define R300_VAP_OUTPUT_VTX_FMT_1__2_COMPONENTS (1<<2)
-# define R300_VAP_OUTPUT_VTX_FMT_1__3_COMPONENTS (1<<3)
-# define R300_VAP_OUTPUT_VTX_FMT_1__4_COMPONENTS (1<<4)
+# define R300_VAP_OUTPUT_VTX_FMT_1__NOT_PRESENT 0
+# define R300_VAP_OUTPUT_VTX_FMT_1__1_COMPONENT 1
+# define R300_VAP_OUTPUT_VTX_FMT_1__2_COMPONENTS 2
+# define R300_VAP_OUTPUT_VTX_FMT_1__3_COMPONENTS 3
+# define R300_VAP_OUTPUT_VTX_FMT_1__4_COMPONENTS 4
#define R300_SE_VTE_CNTL 0x20b0
-# define R300_VPORT_X_SCALE_ENA 0x00000001
-# define R300_VPORT_X_OFFSET_ENA 0x00000002
-# define R300_VPORT_Y_SCALE_ENA 0x00000004
-# define R300_VPORT_Y_OFFSET_ENA 0x00000008
-# define R300_VPORT_Z_SCALE_ENA 0x00000010
-# define R300_VPORT_Z_OFFSET_ENA 0x00000020
-# define R300_VTX_XY_FMT 0x00000100
-# define R300_VTX_Z_FMT 0x00000200
-# define R300_VTX_W0_FMT 0x00000400
-# define R300_VTX_W0_NORMALIZE 0x00000800
-# define R300_VTX_ST_DENORMALIZED 0x00001000
+# define R300_VPORT_X_SCALE_ENA (1 << 0)
+# define R300_VPORT_X_OFFSET_ENA (1 << 1)
+# define R300_VPORT_Y_SCALE_ENA (1 << 2)
+# define R300_VPORT_Y_OFFSET_ENA (1 << 3)
+# define R300_VPORT_Z_SCALE_ENA (1 << 4)
+# define R300_VPORT_Z_OFFSET_ENA (1 << 5)
+# define R300_VTX_XY_FMT (1 << 8)
+# define R300_VTX_Z_FMT (1 << 9)
+# define R300_VTX_W0_FMT (1 << 10)
+# define R300_SERIAL_PROC_ENA (1 << 11)
/* BEGIN: Vertex data assembly - lots of uncertainties */
* Always set COMPONENTS_4 in immediate mode.
*/
-#define R300_VAP_INPUT_ROUTE_0_0 0x2150
-# define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0)
-# define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0)
-# define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0)
-# define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0)
-# define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */
-# define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8
-# define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */
-# define R300_VAP_INPUT_ROUTE_END (1 << 13)
-# define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */
-# define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */
-# define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */
-# define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */
-#define R300_VAP_INPUT_ROUTE_0_1 0x2154
-#define R300_VAP_INPUT_ROUTE_0_2 0x2158
-#define R300_VAP_INPUT_ROUTE_0_3 0x215C
-#define R300_VAP_INPUT_ROUTE_0_4 0x2160
-#define R300_VAP_INPUT_ROUTE_0_5 0x2164
-#define R300_VAP_INPUT_ROUTE_0_6 0x2168
-#define R300_VAP_INPUT_ROUTE_0_7 0x216C
-
+#define R300_VAP_PROG_STREAM_CNTL_0 0x2150
+# define R300_DATA_TYPE_0_SHIFT 0
+# define R300_DATA_TYPE_FLOAT_1 0
+# define R300_DATA_TYPE_FLOAT_2 1
+# define R300_DATA_TYPE_FLOAT_3 2
+# define R300_DATA_TYPE_FLOAT_4 3
+# define R300_DATA_TYPE_BYTE 4
+# define R300_DATA_TYPE_D3DCOLOR 5
+# define R300_DATA_TYPE_SHORT_2 6
+# define R300_DATA_TYPE_SHORT_4 7
+# define R300_DATA_TYPE_VECTOR_3_TTT 8
+# define R300_DATA_TYPE_VECTOR_3_EET 9
+# define R300_SKIP_DWORDS_SHIFT 4
+# define R300_DST_VEC_LOC_SHIFT 8
+# define R300_LAST_VEC (1 << 13)
+# define R300_SIGNED (1 << 14)
+# define R300_NORMALIZE (1 << 15)
+# define R300_DATA_TYPE_1_SHIFT 16
+#define R300_VAP_PROG_STREAM_CNTL_1 0x2154
+#define R300_VAP_PROG_STREAM_CNTL_2 0x2158
+#define R300_VAP_PROG_STREAM_CNTL_3 0x215C
+#define R300_VAP_PROG_STREAM_CNTL_4 0x2160
+#define R300_VAP_PROG_STREAM_CNTL_5 0x2164
+#define R300_VAP_PROG_STREAM_CNTL_6 0x2168
+#define R300_VAP_PROG_STREAM_CNTL_7 0x216C
/* gap */
/* Notes:
* if vertex program uses only position, fglrx will set normal, too
* - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal.
*/
-#define R300_VAP_INPUT_CNTL_0 0x2180
-# define R300_INPUT_CNTL_0_COLOR 0x00000001
-#define R300_VAP_INPUT_CNTL_1 0x2184
+#define R300_VAP_VTX_STATE_CNTL 0x2180
+# define R300_COLOR_0_ASSEMBLY_SHIFT 0
+# define R300_SEL_COLOR 0
+# define R300_SEL_USER_COLOR_0 1
+# define R300_SEL_USER_COLOR_1 2
+# define R300_COLOR_1_ASSEMBLY_SHIFT 2
+# define R300_COLOR_2_ASSEMBLY_SHIFT 4
+# define R300_COLOR_3_ASSEMBLY_SHIFT 6
+# define R300_COLOR_4_ASSEMBLY_SHIFT 8
+# define R300_COLOR_5_ASSEMBLY_SHIFT 10
+# define R300_COLOR_6_ASSEMBLY_SHIFT 12
+# define R300_COLOR_7_ASSEMBLY_SHIFT 14
+# define R300_UPDATE_USER_COLOR_0_ENA (1 << 16)
+
+/*
+ * Each bit in this field applies to the corresponding vector in the VSM
+ * memory (i.e. Bit 0 applies to VECTOR_0 (POSITION), etc.). If the bit
+ * is set, then the corresponding 4-Dword Vector is output into the Vertex Stream.
+ */
+#define R300_VAP_VSM_VTX_ASSM 0x2184
# define R300_INPUT_CNTL_POS 0x00000001
# define R300_INPUT_CNTL_NORMAL 0x00000002
# define R300_INPUT_CNTL_COLOR 0x00000004
* mode, the swizzling pattern is e.g. used to set zw components in texture
* coordinates with only tweo components.
*/
-#define R300_VAP_INPUT_ROUTE_1_0 0x21E0
+#define R300_VAP_PROG_STREAM_CNTL_EXT_0 0x21e0
+# define R300_SWIZZLE0_SHIFT 0
+# define R300_SWIZZLE_SELECT_X_SHIFT 0
+# define R300_SWIZZLE_SELECT_Y_SHIFT 3
+# define R300_SWIZZLE_SELECT_Z_SHIFT 6
+# define R300_SWIZZLE_SELECT_W_SHIFT 9
+
+# define R300_SWIZZLE_SELECT_X 0
+# define R300_SWIZZLE_SELECT_Y 1
+# define R300_SWIZZLE_SELECT_Z 2
+# define R300_SWIZZLE_SELECT_W 3
+# define R300_SWIZZLE_SELECT_FP_ZERO 4
+# define R300_SWIZZLE_SELECT_FP_ONE 5
+/* alternate forms for r300_emit.c */
# define R300_INPUT_ROUTE_SELECT_X 0
# define R300_INPUT_ROUTE_SELECT_Y 1
# define R300_INPUT_ROUTE_SELECT_Z 2
# define R300_INPUT_ROUTE_SELECT_W 3
# define R300_INPUT_ROUTE_SELECT_ZERO 4
# define R300_INPUT_ROUTE_SELECT_ONE 5
-# define R300_INPUT_ROUTE_SELECT_MASK 7
-# define R300_INPUT_ROUTE_X_SHIFT 0
-# define R300_INPUT_ROUTE_Y_SHIFT 3
-# define R300_INPUT_ROUTE_Z_SHIFT 6
-# define R300_INPUT_ROUTE_W_SHIFT 9
-# define R300_INPUT_ROUTE_ENABLE (15 << 12)
-#define R300_VAP_INPUT_ROUTE_1_1 0x21E4
-#define R300_VAP_INPUT_ROUTE_1_2 0x21E8
-#define R300_VAP_INPUT_ROUTE_1_3 0x21EC
-#define R300_VAP_INPUT_ROUTE_1_4 0x21F0
-#define R300_VAP_INPUT_ROUTE_1_5 0x21F4
-#define R300_VAP_INPUT_ROUTE_1_6 0x21F8
-#define R300_VAP_INPUT_ROUTE_1_7 0x21FC
+
+# define R300_WRITE_ENA_SHIFT 12
+# define R300_WRITE_ENA_X 1
+# define R300_WRITE_ENA_Y 2
+# define R300_WRITE_ENA_Z 4
+# define R300_WRITE_ENA_W 8
+# define R300_SWIZZLE1_SHIFT 16
+#define R300_VAP_PROG_STREAM_CNTL_EXT_1 0x21e4
+#define R300_VAP_PROG_STREAM_CNTL_EXT_2 0x21e8
+#define R300_VAP_PROG_STREAM_CNTL_EXT_3 0x21ec
+#define R300_VAP_PROG_STREAM_CNTL_EXT_4 0x21f0
+#define R300_VAP_PROG_STREAM_CNTL_EXT_5 0x21f4
+#define R300_VAP_PROG_STREAM_CNTL_EXT_6 0x21f8
+#define R300_VAP_PROG_STREAM_CNTL_EXT_7 0x21fc
/* END: Vertex data assembly */
* Multiple vertex programs and parameter sets can be loaded at once,
* which could explain the size discrepancy.
*/
-#define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200
-# define R300_PVS_UPLOAD_PROGRAM 0x00000000
-/* gap */
-# define R300_PVS_UPLOAD_PARAMETERS 0x00000200
-/* gap */
-# define R300_PVS_UPLOAD_CLIP_PLANE0 0x00000400
-# define R300_PVS_UPLOAD_CLIP_PLANE1 0x00000401
-# define R300_PVS_UPLOAD_CLIP_PLANE2 0x00000402
-# define R300_PVS_UPLOAD_CLIP_PLANE3 0x00000403
-# define R300_PVS_UPLOAD_CLIP_PLANE4 0x00000404
-# define R300_PVS_UPLOAD_CLIP_PLANE5 0x00000405
-# define R300_PVS_UPLOAD_POINTSIZE 0x00000406
-
-# define R500_PVS_UPLOAD_CLIP_PLANE0 0x00000600
-# define R500_PVS_UPLOAD_CLIP_PLANE1 0x00000601
-# define R500_PVS_UPLOAD_CLIP_PLANE2 0x00000602
-# define R500_PVS_UPLOAD_CLIP_PLANE3 0x00000603
-# define R500_PVS_UPLOAD_CLIP_PLANE4 0x00000604
-# define R500_PVS_UPLOAD_CLIP_PLANE5 0x00000605
+#define R300_VAP_PVS_VECTOR_INDX_REG 0x2200
+# define R300_PVS_CODE_START 0
+# define R300_MAX_PVS_CODE_LINES 256
+# define R500_MAX_PVS_CODE_LINES 1024
+# define R300_PVS_CONST_START 512
+# define R500_PVS_CONST_START 1024
+# define R300_MAX_PVS_CONST_VECS 256
+# define R500_MAX_PVS_CONST_VECS 1024
+# define R300_PVS_UCP_START 1024
+# define R500_PVS_UCP_START 1536
+# define R300_POINT_VPORT_SCALE_OFFSET 1030
+# define R500_POINT_VPORT_SCALE_OFFSET 1542
+# define R300_POINT_GEN_TEX_OFFSET 1031
+# define R500_POINT_GEN_TEX_OFFSET 1543
/*
* These are obsolete defines form r300_context.h, but they might give some
* See bug #9871. http://bugs.freedesktop.org/attachment.cgi?id=10672&action=view
*/
#define R300_VAP_CLIP_CNTL 0x221C
-# define R300_221C_NORMAL 0x00000000
-# define R300_221C_CLEAR 0x0001C000
-#define R300_VAP_UCP_ENABLE_0 (1 << 0)
+# define R300_VAP_UCP_ENABLE_0 (1 << 0)
+# define R300_VAP_UCP_ENABLE_1 (1 << 1)
+# define R300_VAP_UCP_ENABLE_2 (1 << 2)
+# define R300_VAP_UCP_ENABLE_3 (1 << 3)
+# define R300_VAP_UCP_ENABLE_4 (1 << 4)
+# define R300_VAP_UCP_ENABLE_5 (1 << 5)
+# define R300_PS_UCP_MODE_DIST_COP (0 << 14)
+# define R300_PS_UCP_MODE_RADIUS_COP (1 << 14)
+# define R300_PS_UCP_MODE_RADIUS_COP_CLIP (2 << 14)
+# define R300_PS_UCP_MODE_CLIP_AS_TRIFAN (3 << 14)
+# define R300_CLIP_DISABLE (1 << 16)
+# define R300_UCP_CULL_ONLY_ENABLE (1 << 17)
+# define R300_BOUNDARY_EDGE_FLAG_ENABLE (1 << 18)
+# define R500_COLOR2_IS_TEXTURE (1 << 20)
+# define R500_COLOR3_IS_TEXTURE (1 << 21)
/* These seem to be per-pixel and per-vertex X and Y clipping planes. The first
* plane is per-pixel and the second plane is per-vertex.
*
* These registers are called X_QUAD0_1_FL to X_QUAD0_4_FL by glxtest.
*/
-#define R300_VAP_CLIP_X_0 0x2220
-#define R300_VAP_CLIP_X_1 0x2224
-#define R300_VAP_CLIP_Y_0 0x2228
-#define R300_VAP_CLIP_Y_1 0x222c
+#define R300_VAP_GB_VERT_CLIP_ADJ 0x2220
+#define R300_VAP_GB_VERT_DISC_ADJ 0x2224
+#define R300_VAP_GB_HORZ_CLIP_ADJ 0x2228
+#define R300_VAP_GB_HORZ_DISC_ADJ 0x222c
/* gap */
* Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
* avoids bugs caused by still running shaders reading bad data from memory.
*/
-#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */
+#define R300_VAP_PVS_STATE_FLUSH_REG 0x2284
/* This register is used to define the number of core clocks to wait for a
* vertex to be received by the VAP input controller (while the primitive
* is sometimes accepted other instruction that have no relationship with
* position calculations.
*/
-#define R300_VAP_PVS_CNTL_1 0x22D0
-# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
-# define R300_PVS_CNTL_1_POS_END_SHIFT 10
-# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
+#define R300_VAP_PVS_CODE_CNTL_0 0x22D0
+# define R300_PVS_FIRST_INST_SHIFT 0
+# define R300_PVS_XYZW_VALID_INST_SHIFT 10
+# define R300_PVS_LAST_INST_SHIFT 20
/* Addresses are relative the the vertex program parameters area. */
-#define R300_VAP_PVS_CNTL_2 0x22D4
-# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
-# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
-#define R300_VAP_PVS_CNTL_3 0x22D8
-# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10
-# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0
+#define R300_VAP_PVS_CONST_CNTL 0x22D4
+# define R300_PVS_CONST_BASE_OFFSET_SHIFT 0
+# define R300_PVS_MAX_CONST_ADDR_SHIFT 16
+#define R300_VAP_PVS_CODE_CNTL_1 0x22D8
+# define R300_PVS_LAST_VTX_SRC_INST_SHIFT 0
+#define R300_VAP_PVS_FLOW_CNTL_OPC 0x22DC
/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
* immediate vertices
# define R300_GB_FOG_SELECT_C3A (3 << 0)
# define R300_GB_FOG_SELECT_1_1_W (4 << 0)
# define R300_GB_FOG_SELECT_Z (5 << 0)
-# define R300_GB_DEPTH_SELECT_Z (0 << 3
+# define R300_GB_DEPTH_SELECT_Z (0 << 3)
# define R300_GB_DEPTH_SELECT_1_1_W (1 << 3)
# define R300_GB_W_SELECT_1_W (0 << 4)
# define R300_GB_W_SELECT_1 (1 << 4)
#define R500_RS_IP_13 0x40A8
#define R500_RS_IP_14 0x40AC
#define R500_RS_IP_15 0x40B0
+#define R500_RS_IP_PTR_K0 62
+#define R500_RS_IP_PTR_K1 63
#define R500_RS_IP_TEX_PTR_S_SHIFT 0
#define R500_RS_IP_TEX_PTR_T_SHIFT 6
#define R500_RS_IP_TEX_PTR_R_SHIFT 12
#define R500_RS_IP_TEX_PTR_Q_SHIFT 18
#define R500_RS_IP_COL_PTR_SHIFT 24
#define R500_RS_IP_COL_FMT_SHIFT 27
-#define R500_RS_IP_COL_FMT_RGBA (0 << 27)
-#define R500_RS_IP_COL_FMT_RGB0 (1 << 27)
-#define R500_RS_IP_COL_FMT_RGB1 (2 << 27)
-/* gap */
-#define R500_RS_IP_COL_FMT_000A (4 << 27)
-#define R500_RS_IP_COL_FMT_0000 (5 << 27)
-#define R500_RS_IP_COL_FMT_0001 (6 << 27)
-/* gap */
-#define R500_RS_IP_COL_FMT_111A (8 << 27)
-#define R500_RS_IP_COL_FMT_1110 (9 << 27)
-#define R500_RS_IP_COL_FMT_1111 (10 << 27)
+# define R500_RS_COL_PTR(x) ((x) << 24)
+# define R500_RS_COL_FMT(x) ((x) << 27)
/* gap */
#define R500_RS_IP_OFFSET_DIS (0 << 31)
#define R500_RS_IP_OFFSET_EN (1 << 31)
/* gap */
/* Zero to flush caches. */
-#define R300_TX_CNTL 0x4100
+#define R300_TX_INVALTAGS 0x4100
#define R300_TX_FLUSH 0x0
/* The upper enable bits are guessed, based on fglrx reported limits. */
# define R500_TX_DIRECTION_VERITCAL (1<<27)
/* S Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */
-#define GA_POINT_S0 0x4200
+#define R300_GA_POINT_S0 0x4200
/* T Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */
-#define GA_POINT_T0 0x4204
+#define R300_GA_POINT_T0 0x4204
/* S Texture Coordinate of Vertex 2 for Point texture stuffing (URC) */
-#define GA_POINT_S1 0x4208
+#define R300_GA_POINT_S1 0x4208
/* T Texture Coordinate of Vertex 2 for Point texture stuffing (URC) */
-#define GA_POINT_T1 0x420c
+#define R300_GA_POINT_T1 0x420c
/* Specifies amount to shift integer position of vertex (screen space) before
* converting to float for triangle stipple.
*/
-#define GA_TRIANGLE_STIPPLE 0x4214
-# define GA_TRIANGLE_STIPPLE_X_SHIFT_SHIFT 0
-# define GA_TRIANGLE_STIPPLE_X_SHIFT_MASK 0x0000000f
-# define GA_TRIANGLE_STIPPLE_Y_SHIFT_SHIFT 16
-# define GA_TRIANGLE_STIPPLE_Y_SHIFT_MASK 0x000f0000
+#define R300_GA_TRIANGLE_STIPPLE 0x4214
+# define R300_GA_TRIANGLE_STIPPLE_X_SHIFT_SHIFT 0
+# define R300_GA_TRIANGLE_STIPPLE_X_SHIFT_MASK 0x0000000f
+# define R300_GA_TRIANGLE_STIPPLE_Y_SHIFT_SHIFT 16
+# define R300_GA_TRIANGLE_STIPPLE_Y_SHIFT_MASK 0x000f0000
/* The pointsize is given in multiples of 6. The pointsize can be enormous:
* Clear() renders a single point that fills the entire framebuffer.
# define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6)
/* Blue fill color */
-#define GA_FILL_R 0x4220
+#define R500_GA_FILL_R 0x4220
/* Blue fill color */
-#define GA_FILL_G 0x4224
+#define R500_GA_FILL_G 0x4224
/* Blue fill color */
-#define GA_FILL_B 0x4228
+#define R500_GA_FILL_B 0x4228
/* Alpha fill color */
-#define GA_FILL_A 0x422c
+#define R500_GA_FILL_A 0x422c
/* Specifies maximum and minimum point & sprite sizes for per vertex size
* VE: vertical or horizontal
* HO & VE: no classification
*/
-#define GA_LINE_CNTL 0x4234
-# define GA_LINE_CNTL_WIDTH_SHIFT 0
-# define GA_LINE_CNTL_WIDTH_MASK 0x0000ffff
-# define GA_LINE_CNTL_END_TYPE_HOR (0 << 16)
-# define GA_LINE_CNTL_END_TYPE_VER (1 << 16)
-# define GA_LINE_CNTL_END_TYPE_SQR (2 << 16) /* horizontal or vertical depending upon slope */
-# define GA_LINE_CNTL_END_TYPE_COMP (3 << 16) /* Computed (perpendicular to slope) */
-# define GA_LINE_CNTL_SORT_NO (0 << 18)
-# define GA_LINE_CNTL_SORT_MINX_MINY (1 << 18)
+#define R300_GA_LINE_CNTL 0x4234
+# define R300_GA_LINE_CNTL_WIDTH_SHIFT 0
+# define R300_GA_LINE_CNTL_WIDTH_MASK 0x0000ffff
+# define R300_GA_LINE_CNTL_END_TYPE_HOR (0 << 16)
+# define R300_GA_LINE_CNTL_END_TYPE_VER (1 << 16)
+# define R300_GA_LINE_CNTL_END_TYPE_SQR (2 << 16) /* horizontal or vertical depending upon slope */
+# define R300_GA_LINE_CNTL_END_TYPE_COMP (3 << 16) /* Computed (perpendicular to slope) */
+# define R500_GA_LINE_CNTL_SORT_NO (0 << 18)
+# define R500_GA_LINE_CNTL_SORT_MINX_MINY (1 << 18)
/** TODO: looks wrong */
-# define R300_LINESIZE_MAX (GA_LINE_CNTL_WIDTH_MASK / 6)
+# define R300_LINESIZE_MAX (R300_GA_LINE_CNTL_WIDTH_MASK / 6)
/** TODO: looks wrong */
# define R300_LINE_CNT_HO (1 << 16)
/** TODO: looks wrong */
# define R300_LINE_CNT_VE (1 << 17)
/* Line Stipple configuration information. */
-#define GA_LINE_STIPPLE_CONFIG 0x4238
-# define GA_LINE_STIPPLE_CONFIG_LINE_RESET_NO (0 << 0)
-# define GA_LINE_STIPPLE_CONFIG_LINE_RESET_LINE (1 << 0)
-# define GA_LINE_STIPPLE_CONFIG_LINE_RESET_PACKET (2 << 0)
-# define GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_SHIFT 2
-# define GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK 0xfffffffc
+#define R300_GA_LINE_STIPPLE_CONFIG 0x4238
+# define R300_GA_LINE_STIPPLE_CONFIG_LINE_RESET_NO (0 << 0)
+# define R300_GA_LINE_STIPPLE_CONFIG_LINE_RESET_LINE (1 << 0)
+# define R300_GA_LINE_STIPPLE_CONFIG_LINE_RESET_PACKET (2 << 0)
+# define R300_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_SHIFT 2
+# define R300_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK 0xfffffffc
/* Used to load US instructions and constants */
#define R500_GA_US_VECTOR_INDEX 0x4250
-# define GA_US_VECTOR_INDEX_SHIFT 0
-# define GA_US_VECTOR_INDEX_MASK 0x000000ff
-# define GA_US_VECTOR_INDEX_TYPE_INSTR (0 << 16)
-# define GA_US_VECTOR_INDEX_TYPE_CONST (1 << 16)
-# define GA_US_VECTOR_INDEX_CLAMP_NO (0 << 17)
-# define GA_US_VECTOR_INDEX_CLAMP_CONST (1 << 17)
+# define R500_GA_US_VECTOR_INDEX_SHIFT 0
+# define R500_GA_US_VECTOR_INDEX_MASK 0x000000ff
+# define R500_GA_US_VECTOR_INDEX_TYPE_INSTR (0 << 16)
+# define R500_GA_US_VECTOR_INDEX_TYPE_CONST (1 << 16)
+# define R500_GA_US_VECTOR_INDEX_CLAMP_NO (0 << 17)
+# define R500_GA_US_VECTOR_INDEX_CLAMP_CONST (1 << 17)
/* Data register for loading US instructions and constants */
#define R500_GA_US_VECTOR_DATA 0x4254
/* Specifies color properties and mappings of textures. */
-#define GA_COLOR_CONTROL_PS3 0x4258
-# define TEX0_SHADING_PS3_SOLID (0 << 0)
-# define TEX0_SHADING_PS3_FLAT (1 << 0)
-# define TEX0_SHADING_PS3_GOURAUD (2 << 0)
-# define TEX1_SHADING_PS3_SOLID (0 << 2)
-# define TEX1_SHADING_PS3_FLAT (1 << 2)
-# define TEX1_SHADING_PS3_GOURAUD (2 << 2)
-# define TEX2_SHADING_PS3_SOLID (0 << 4)
-# define TEX2_SHADING_PS3_FLAT (1 << 4)
-# define TEX2_SHADING_PS3_GOURAUD (2 << 4)
-# define TEX3_SHADING_PS3_SOLID (0 << 6)
-# define TEX3_SHADING_PS3_FLAT (1 << 6)
-# define TEX3_SHADING_PS3_GOURAUD (2 << 6)
-# define TEX4_SHADING_PS3_SOLID (0 << 8)
-# define TEX4_SHADING_PS3_FLAT (1 << 8)
-# define TEX4_SHADING_PS3_GOURAUD (2 << 8)
-# define TEX5_SHADING_PS3_SOLID (0 << 10)
-# define TEX5_SHADING_PS3_FLAT (1 << 10)
-# define TEX5_SHADING_PS3_GOURAUD (2 << 10)
-# define TEX6_SHADING_PS3_SOLID (0 << 12)
-# define TEX6_SHADING_PS3_FLAT (1 << 12)
-# define TEX6_SHADING_PS3_GOURAUD (2 << 12)
-# define TEX7_SHADING_PS3_SOLID (0 << 14)
-# define TEX7_SHADING_PS3_FLAT (1 << 14)
-# define TEX7_SHADING_PS3_GOURAUD (2 << 14)
-# define TEX8_SHADING_PS3_SOLID (0 << 16)
-# define TEX8_SHADING_PS3_FLAT (1 << 16)
-# define TEX8_SHADING_PS3_GOURAUD (2 << 16)
-# define TEX9_SHADING_PS3_SOLID (0 << 18)
-# define TEX9_SHADING_PS3_FLAT (1 << 18)
-# define TEX9_SHADING_PS3_GOURAUD (2 << 18)
-# define TEX10_SHADING_PS3_SOLID (0 << 20)
-# define TEX10_SHADING_PS3_FLAT (1 << 20)
-# define TEX10_SHADING_PS3_GOURAUD (2 << 20)
-# define COLOR0_TEX_OVERRIDE_NO (0 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_0 (1 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_1 (2 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_2 (3 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_3 (4 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_4 (5 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_5 (6 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_6 (7 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_7 (8 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_8_C2 (9 << 22)
-# define COLOR0_TEX_OVERRIDE_TEX_9_C3 (10 << 22)
-# define COLOR1_TEX_OVERRIDE_NO (0 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_0 (1 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_1 (2 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_2 (3 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_3 (4 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_4 (5 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_5 (6 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_6 (7 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_7 (8 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_8_C2 (9 << 26)
-# define COLOR1_TEX_OVERRIDE_TEX_9_C3 (10 << 26)
+#define R500_GA_COLOR_CONTROL_PS3 0x4258
+# define R500_TEX0_SHADING_PS3_SOLID (0 << 0)
+# define R500_TEX0_SHADING_PS3_FLAT (1 << 0)
+# define R500_TEX0_SHADING_PS3_GOURAUD (2 << 0)
+# define R500_TEX1_SHADING_PS3_SOLID (0 << 2)
+# define R500_TEX1_SHADING_PS3_FLAT (1 << 2)
+# define R500_TEX1_SHADING_PS3_GOURAUD (2 << 2)
+# define R500_TEX2_SHADING_PS3_SOLID (0 << 4)
+# define R500_TEX2_SHADING_PS3_FLAT (1 << 4)
+# define R500_TEX2_SHADING_PS3_GOURAUD (2 << 4)
+# define R500_TEX3_SHADING_PS3_SOLID (0 << 6)
+# define R500_TEX3_SHADING_PS3_FLAT (1 << 6)
+# define R500_TEX3_SHADING_PS3_GOURAUD (2 << 6)
+# define R500_TEX4_SHADING_PS3_SOLID (0 << 8)
+# define R500_TEX4_SHADING_PS3_FLAT (1 << 8)
+# define R500_TEX4_SHADING_PS3_GOURAUD (2 << 8)
+# define R500_TEX5_SHADING_PS3_SOLID (0 << 10)
+# define R500_TEX5_SHADING_PS3_FLAT (1 << 10)
+# define R500_TEX5_SHADING_PS3_GOURAUD (2 << 10)
+# define R500_TEX6_SHADING_PS3_SOLID (0 << 12)
+# define R500_TEX6_SHADING_PS3_FLAT (1 << 12)
+# define R500_TEX6_SHADING_PS3_GOURAUD (2 << 12)
+# define R500_TEX7_SHADING_PS3_SOLID (0 << 14)
+# define R500_TEX7_SHADING_PS3_FLAT (1 << 14)
+# define R500_TEX7_SHADING_PS3_GOURAUD (2 << 14)
+# define R500_TEX8_SHADING_PS3_SOLID (0 << 16)
+# define R500_TEX8_SHADING_PS3_FLAT (1 << 16)
+# define R500_TEX8_SHADING_PS3_GOURAUD (2 << 16)
+# define R500_TEX9_SHADING_PS3_SOLID (0 << 18)
+# define R500_TEX9_SHADING_PS3_FLAT (1 << 18)
+# define R500_TEX9_SHADING_PS3_GOURAUD (2 << 18)
+# define R500_TEX10_SHADING_PS3_SOLID (0 << 20)
+# define R500_TEX10_SHADING_PS3_FLAT (1 << 20)
+# define R500_TEX10_SHADING_PS3_GOURAUD (2 << 20)
+# define R500_COLOR0_TEX_OVERRIDE_NO (0 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_0 (1 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_1 (2 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_2 (3 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_3 (4 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_4 (5 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_5 (6 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_6 (7 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_7 (8 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_8_C2 (9 << 22)
+# define R500_COLOR0_TEX_OVERRIDE_TEX_9_C3 (10 << 22)
+# define R500_COLOR1_TEX_OVERRIDE_NO (0 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_0 (1 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_1 (2 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_2 (3 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_3 (4 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_4 (5 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_5 (6 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_6 (7 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_7 (8 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_8_C2 (9 << 26)
+# define R500_COLOR1_TEX_OVERRIDE_TEX_9_C3 (10 << 26)
/* Returns idle status of various G3D block, captured when GA_IDLE written or
* when hard or soft reset asserted.
*/
-#define GA_IDLE 0x425c
-# define GA_IDLE_PIPE3_Z_IDLE (0 << 0)
-# define GA_IDLE_PIPE2_Z_IDLE (0 << 1)
-# define GA_IDLE_PIPE3_CD_IDLE (0 << 2)
-# define GA_IDLE_PIPE2_CD_IDLE (0 << 3)
-# define GA_IDLE_PIPE3_FG_IDLE (0 << 4)
-# define GA_IDLE_PIPE2_FG_IDLE (0 << 5)
-# define GA_IDLE_PIPE3_US_IDLE (0 << 6)
-# define GA_IDLE_PIPE2_US_IDLE (0 << 7)
-# define GA_IDLE_PIPE3_SC_IDLE (0 << 8)
-# define GA_IDLE_PIPE2_SC_IDLE (0 << 9)
-# define GA_IDLE_PIPE3_RS_IDLE (0 << 10)
-# define GA_IDLE_PIPE2_RS_IDLE (0 << 11)
-# define GA_IDLE_PIPE1_Z_IDLE (0 << 12)
-# define GA_IDLE_PIPE0_Z_IDLE (0 << 13)
-# define GA_IDLE_PIPE1_CD_IDLE (0 << 14)
-# define GA_IDLE_PIPE0_CD_IDLE (0 << 15)
-# define GA_IDLE_PIPE1_FG_IDLE (0 << 16)
-# define GA_IDLE_PIPE0_FG_IDLE (0 << 17)
-# define GA_IDLE_PIPE1_US_IDLE (0 << 18)
-# define GA_IDLE_PIPE0_US_IDLE (0 << 19)
-# define GA_IDLE_PIPE1_SC_IDLE (0 << 20)
-# define GA_IDLE_PIPE0_SC_IDLE (0 << 21)
-# define GA_IDLE_PIPE1_RS_IDLE (0 << 22)
-# define GA_IDLE_PIPE0_RS_IDLE (0 << 23)
-# define GA_IDLE_SU_IDLE (0 << 24)
-# define GA_IDLE_GA_IDLE (0 << 25)
-# define GA_IDLE_GA_UNIT2_IDLE (0 << 26)
+#define R500_GA_IDLE 0x425c
+# define R500_GA_IDLE_PIPE3_Z_IDLE (0 << 0)
+# define R500_GA_IDLE_PIPE2_Z_IDLE (0 << 1)
+# define R500_GA_IDLE_PIPE3_CD_IDLE (0 << 2)
+# define R500_GA_IDLE_PIPE2_CD_IDLE (0 << 3)
+# define R500_GA_IDLE_PIPE3_FG_IDLE (0 << 4)
+# define R500_GA_IDLE_PIPE2_FG_IDLE (0 << 5)
+# define R500_GA_IDLE_PIPE3_US_IDLE (0 << 6)
+# define R500_GA_IDLE_PIPE2_US_IDLE (0 << 7)
+# define R500_GA_IDLE_PIPE3_SC_IDLE (0 << 8)
+# define R500_GA_IDLE_PIPE2_SC_IDLE (0 << 9)
+# define R500_GA_IDLE_PIPE3_RS_IDLE (0 << 10)
+# define R500_GA_IDLE_PIPE2_RS_IDLE (0 << 11)
+# define R500_GA_IDLE_PIPE1_Z_IDLE (0 << 12)
+# define R500_GA_IDLE_PIPE0_Z_IDLE (0 << 13)
+# define R500_GA_IDLE_PIPE1_CD_IDLE (0 << 14)
+# define R500_GA_IDLE_PIPE0_CD_IDLE (0 << 15)
+# define R500_GA_IDLE_PIPE1_FG_IDLE (0 << 16)
+# define R500_GA_IDLE_PIPE0_FG_IDLE (0 << 17)
+# define R500_GA_IDLE_PIPE1_US_IDLE (0 << 18)
+# define R500_GA_IDLE_PIPE0_US_IDLE (0 << 19)
+# define R500_GA_IDLE_PIPE1_SC_IDLE (0 << 20)
+# define R500_GA_IDLE_PIPE0_SC_IDLE (0 << 21)
+# define R500_GA_IDLE_PIPE1_RS_IDLE (0 << 22)
+# define R500_GA_IDLE_PIPE0_RS_IDLE (0 << 23)
+# define R500_GA_IDLE_SU_IDLE (0 << 24)
+# define R500_GA_IDLE_GA_IDLE (0 << 25)
+# define R500_GA_IDLE_GA_UNIT2_IDLE (0 << 26)
/* Current value of stipple accumulator. */
#define R300_GA_LINE_STIPPLE_VALUE 0x4260
/* S Texture Coordinate Value for Vertex 0 of Line (stuff textures -- i.e. AA) */
-#define GA_LINE_S0 0x4264
+#define R300_GA_LINE_S0 0x4264
/* S Texture Coordinate Value for Vertex 1 of Lines (V2 of parallelogram -- stuff textures -- i.e. AA) */
-#define GA_LINE_S1 0x4268
+#define R300_GA_LINE_S1 0x4268
/* GA Input fifo high water marks */
-#define GA_FIFO_CNTL 0x4270
-# define GA_FIFO_CNTL_VERTEX_FIFO_MASK 0x00000007
-# define GA_FIFO_CNTL_VERTEX_FIFO_SHIFT 0
-# define GA_FIFO_CNTL_VERTEX_INDEX_MASK 0x00000038
-# define GA_FIFO_CNTL_VERTEX_INDEX_SHIFT 3
-# define GA_FIFO_CNTL_VERTEX_REG_MASK 0x00003fc0
-# define GA_FIFO_CNTL_VERTEX_REG_SHIFT 6
-
-/* Something shade related */
-#define GA_ENHANCE 0x4274
-# define GA_ENHANCE_DEADLOCK_CNTL_NO_EFFECT (0 << 0)
-# define GA_ENHANCE_DEADLOCK_CNTL_PREVENT_TCL (1 << 0) /* Prevents TCL interface from deadlocking on GA side. */
-# define GA_ENHANCE_FASTSYNC_CNTL_NO_EFFECT (0 << 1)
-# define GA_ENHANCE_FASTSYNC_CNTL_ENABLE (1 << 1) /* Enables high-performance register/primitive switching. */
-# define GA_ENHANCE_REG_READWRITE_NO_EFFECT (0 << 2) /* R520+ only */
-# define GA_ENHANCE_REG_READWRITE_ENABLE (1 << 2) /* R520+ only, Enables GA support of simultaneous register reads and writes. */
-# define GA_ENHANCE_REG_NOSTALL_NO_EFFECT (0 << 3)
-# define GA_ENHANCE_REG_NOSTALL_ENABLE (1 << 3) /* Enables GA support of no-stall reads for register read back. */
+#define R500_GA_FIFO_CNTL 0x4270
+# define R500_GA_FIFO_CNTL_VERTEX_FIFO_MASK 0x00000007
+# define R500_GA_FIFO_CNTL_VERTEX_FIFO_SHIFT 0
+# define R500_GA_FIFO_CNTL_VERTEX_INDEX_MASK 0x00000038
+# define R500_GA_FIFO_CNTL_VERTEX_INDEX_SHIFT 3
+# define R500_GA_FIFO_CNTL_VERTEX_REG_MASK 0x00003fc0
+# define R500_GA_FIFO_CNTL_VERTEX_REG_SHIFT 6
+
+/* GA enhance/tweaks */
+#define R300_GA_ENHANCE 0x4274
+# define R300_GA_ENHANCE_DEADLOCK_CNTL_NO_EFFECT (0 << 0)
+# define R300_GA_ENHANCE_DEADLOCK_CNTL_PREVENT_TCL (1 << 0) /* Prevents TCL interface from deadlocking on GA side. */
+# define R300_GA_ENHANCE_FASTSYNC_CNTL_NO_EFFECT (0 << 1)
+# define R300_GA_ENHANCE_FASTSYNC_CNTL_ENABLE (1 << 1) /* Enables high-performance register/primitive switching. */
+# define R500_GA_ENHANCE_REG_READWRITE_NO_EFFECT (0 << 2) /* R520+ only */
+# define R500_GA_ENHANCE_REG_READWRITE_ENABLE (1 << 2) /* R520+ only, Enables GA support of simultaneous register reads and writes. */
+# define R500_GA_ENHANCE_REG_NOSTALL_NO_EFFECT (0 << 3)
+# define R500_GA_ENHANCE_REG_NOSTALL_ENABLE (1 << 3) /* Enables GA support of no-stall reads for register read back. */
#define R300_GA_COLOR_CONTROL 0x4278
# define R300_GA_COLOR_CONTROL_RGB0_SHADING_SOLID (0 << 0)
/* Polygon Mode
* Dangerous
*/
-#define GA_POLY_MODE 0x4288
-# define GA_POLY_MODE_DISABLE (0 << 0)
-# define GA_POLY_MODE_DUAL (1 << 0) /* send 2 sets of 3 polys with specified poly type */
+#define R300_GA_POLY_MODE 0x4288
+# define R300_GA_POLY_MODE_DISABLE (0 << 0)
+# define R300_GA_POLY_MODE_DUAL (1 << 0) /* send 2 sets of 3 polys with specified poly type */
/* reserved */
-# define GA_POLY_MODE_FRONT_PTYPE_POINT (0 << 4)
-# define GA_POLY_MODE_FRONT_PTYPE_LINE (1 << 4)
-# define GA_POLY_MODE_FRONT_PTYPE_TRI (2 << 4)
+# define R300_GA_POLY_MODE_FRONT_PTYPE_POINT (0 << 4)
+# define R300_GA_POLY_MODE_FRONT_PTYPE_LINE (1 << 4)
+# define R300_GA_POLY_MODE_FRONT_PTYPE_TRI (2 << 4)
/* reserved */
-# define GA_POLY_MODE_BACK_PTYPE_POINT (0 << 7)
-# define GA_POLY_MODE_BACK_PTYPE_LINE (1 << 7)
-# define GA_POLY_MODE_BACK_PTYPE_TRI (2 << 7)
+# define R300_GA_POLY_MODE_BACK_PTYPE_POINT (0 << 7)
+# define R300_GA_POLY_MODE_BACK_PTYPE_LINE (1 << 7)
+# define R300_GA_POLY_MODE_BACK_PTYPE_TRI (2 << 7)
/* reserved */
/* Specifies the rouding mode for geometry & color SPFP to FP conversions. */
-#define GA_ROUND_MODE 0x428c
-# define GA_ROUND_MODE_GEOMETRY_ROUND_TRUNC (0 << 0)
-# define GA_ROUND_MODE_GEOMETRY_ROUND_NEAREST (1 << 0)
-# define GA_ROUND_MODE_COLOR_ROUND_TRUNC (0 << 2)
-# define GA_ROUND_MODE_COLOR_ROUND_NEAREST (1 << 2)
-# define GA_ROUND_MODE_RGB_CLAMP_RGB (0 << 4)
-# define GA_ROUND_MODE_RGB_CLAMP_FP20 (1 << 4)
-# define GA_ROUND_MODE_ALPHA_CLAMP_RGB (0 << 5)
-# define GA_ROUND_MODE_ALPHA_CLAMP_FP20 (1 << 5)
-# define GA_ROUND_MODE_GEOMETRY_MASK_SHIFT 6
-# define GA_ROUND_MODE_GEOMETRY_MASK_MASK 0x000003c0
+#define R300_GA_ROUND_MODE 0x428c
+# define R300_GA_ROUND_MODE_GEOMETRY_ROUND_TRUNC (0 << 0)
+# define R300_GA_ROUND_MODE_GEOMETRY_ROUND_NEAREST (1 << 0)
+# define R300_GA_ROUND_MODE_COLOR_ROUND_TRUNC (0 << 2)
+# define R300_GA_ROUND_MODE_COLOR_ROUND_NEAREST (1 << 2)
+# define R300_GA_ROUND_MODE_RGB_CLAMP_RGB (0 << 4)
+# define R300_GA_ROUND_MODE_RGB_CLAMP_FP20 (1 << 4)
+# define R300_GA_ROUND_MODE_ALPHA_CLAMP_RGB (0 << 5)
+# define R300_GA_ROUND_MODE_ALPHA_CLAMP_FP20 (1 << 5)
+# define R500_GA_ROUND_MODE_GEOMETRY_MASK_SHIFT 6
+# define R500_GA_ROUND_MODE_GEOMETRY_MASK_MASK 0x000003c0
/* Specifies x & y offsets for vertex data after conversion to FP.
* Offsets are in S15 format (subpixels -- 1/12 or 1/16, even in 8b
* subprecision).
*/
-#define GA_OFFSET 0x4290
-# define GA_OFFSET_X_OFFSET_SHIFT 0
-# define GA_OFFSET_X_OFFSET_MASK 0x0000ffff
-# define GA_OFFSET_Y_OFFSET_SHIFT 16
-# define GA_OFFSET_Y_OFFSET_MASK 0xffff0000
+#define R300_GA_OFFSET 0x4290
+# define R300_GA_OFFSET_X_OFFSET_SHIFT 0
+# define R300_GA_OFFSET_X_OFFSET_MASK 0x0000ffff
+# define R300_GA_OFFSET_Y_OFFSET_SHIFT 16
+# define R300_GA_OFFSET_Y_OFFSET_MASK 0xffff0000
/* Specifies the scale to apply to fog. */
-#define R300_RE_FOG_SCALE 0x4294
+#define R300_GA_FOG_SCALE 0x4294
/* Specifies the offset to apply to fog. */
-#define R300_RE_FOG_START 0x4298
+#define R300_GA_FOG_OFFSET 0x4298
+/* Specifies number of cycles to assert reset, and also causes RB3D soft reset to assert. */
+#define R300_GA_SOFT_RESET 0x429c
/* Not sure why there are duplicate of factor and constant values.
* My best guess so far is that there are seperate zbiases for test and write.
* Some of the tests indicate that fgl has a fallback implementation of zbias
* via pixel shaders.
*/
-#define R300_RE_ZBIAS_CNTL 0x42A0 /* GUESS */
-#define R300_RE_ZBIAS_T_FACTOR 0x42A4
-#define R300_RE_ZBIAS_T_CONSTANT 0x42A8
-#define R300_RE_ZBIAS_W_FACTOR 0x42AC
-#define R300_RE_ZBIAS_W_CONSTANT 0x42B0
+#define R300_SU_TEX_WRAP 0x42A0
+#define R300_SU_POLY_OFFSET_FRONT_SCALE 0x42A4
+#define R300_SU_POLY_OFFSET_FRONT_OFFSET 0x42A8
+#define R300_SU_POLY_OFFSET_BACK_SCALE 0x42AC
+#define R300_SU_POLY_OFFSET_BACK_OFFSET 0x42B0
/* This register needs to be set to (1<<1) for RV350 to correctly
* perform depth test (see --vb-triangles in r300_demo)
* One to enable depth test and one for depth write.
* Yet this doesnt explain why depth writes work ...
*/
-#define R300_RE_OCCLUSION_CNTL 0x42B4
-# define R300_OCCLUSION_ON (1<<1)
+#define R300_SU_POLY_OFFSET_ENABLE 0x42B4
+# define R300_FRONT_ENABLE (1 << 0)
+# define R300_BACK_ENABLE (1 << 1)
+# define R300_PARA_ENABLE (1 << 2)
-#define R300_RE_CULL_CNTL 0x42B8
+#define R300_SU_CULL_MODE 0x42B8
# define R300_CULL_FRONT (1 << 0)
# define R300_CULL_BACK (1 << 1)
# define R300_FRONT_FACE_CCW (0 << 2)
#define R300_RS_IP_3 0x431C
# define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */
# define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */
-# define R300_RS_TEX_PTR(x) (x << 0)\r
-# define R300_RS_COL_PTR(x) (x << 6)\r
-# define R300_RS_COL_FMT(x) (x << 9)\r
-# define R300_RS_COL_FMT_RGBA 0\r
-# define R300_RS_COL_FMT_RGB0 2\r
-# define R300_RS_COL_FMT_RGB1 3\r
-# define R300_RS_COL_FMT_000A 4\r
-# define R300_RS_COL_FMT_0000 5\r
-# define R300_RS_COL_FMT_0001 6\r
-# define R300_RS_COL_FMT_111A 8\r
-# define R300_RS_COL_FMT_1110 9\r
-# define R300_RS_COL_FMT_1111 10\r
-# define R300_RS_SEL_S(x) (x << 13)
-# define R300_RS_SEL_T(x) (x << 16)
-# define R300_RS_SEL_R(x) (x << 19)
-# define R300_RS_SEL_Q(x) (x << 22)
-# define R300_RS_SEL_C0 0\r
-# define R300_RS_SEL_C1 1\r
-# define R300_RS_SEL_C2 2\r
-# define R300_RS_SEL_C3 3\r
-# define R300_RS_SEL_K0 4\r
-# define R300_RS_SEL_K1 5\r
+# define R300_RS_TEX_PTR(x) ((x) << 0)
+# define R300_RS_COL_PTR(x) ((x) << 6)
+# define R300_RS_COL_FMT(x) ((x) << 9)
+# define R300_RS_COL_FMT_RGBA 0
+# define R300_RS_COL_FMT_RGB0 1
+# define R300_RS_COL_FMT_RGB1 2
+# define R300_RS_COL_FMT_000A 4
+# define R300_RS_COL_FMT_0000 5
+# define R300_RS_COL_FMT_0001 6
+# define R300_RS_COL_FMT_111A 8
+# define R300_RS_COL_FMT_1110 9
+# define R300_RS_COL_FMT_1111 10
+# define R300_RS_SEL_S(x) ((x) << 13)
+# define R300_RS_SEL_T(x) ((x) << 16)
+# define R300_RS_SEL_R(x) ((x) << 19)
+# define R300_RS_SEL_Q(x) ((x) << 22)
+# define R300_RS_SEL_C0 0
+# define R300_RS_SEL_C1 1
+# define R300_RS_SEL_C2 2
+# define R300_RS_SEL_C3 3
+# define R300_RS_SEL_K0 4
+# define R300_RS_SEL_K1 5
/* */
#define R500_RS_INST_13 0x4354
#define R500_RS_INST_14 0x4358
#define R500_RS_INST_15 0x435c
-#define R500_RS_INST_TEX_ID_SHIFT 0\r
-#define R500_RS_INST_TEX_CN_WRITE (1 << 4)\r
-#define R500_RS_INST_TEX_ADDR_SHIFT 5\r
-#define R500_RS_INST_COL_ID_SHIFT 12\r
-#define R500_RS_INST_COL_CN_NO_WRITE (0 << 16)\r
-#define R500_RS_INST_COL_CN_WRITE (1 << 16)\r
-#define R500_RS_INST_COL_CN_WRITE_FBUFFER (2 << 16)\r
-#define R500_RS_INST_COL_CN_WRITE_BACKFACE (3 << 16)\r
-#define R500_RS_INST_COL_ADDR_SHIFT 18\r
-#define R500_RS_INST_TEX_ADJ (1 << 25)\r
-#define R500_RS_INST_W_CN (1 << 26)\r
+#define R500_RS_INST_TEX_ID_SHIFT 0
+#define R500_RS_INST_TEX_CN_WRITE (1 << 4)
+#define R500_RS_INST_TEX_ADDR_SHIFT 5
+#define R500_RS_INST_COL_ID_SHIFT 12
+#define R500_RS_INST_COL_CN_NO_WRITE (0 << 16)
+#define R500_RS_INST_COL_CN_WRITE (1 << 16)
+#define R500_RS_INST_COL_CN_WRITE_FBUFFER (2 << 16)
+#define R500_RS_INST_COL_CN_WRITE_BACKFACE (3 << 16)
+#define R500_RS_INST_COL_ADDR_SHIFT 18
+#define R500_RS_INST_TEX_ADJ (1 << 25)
+#define R500_RS_INST_W_CN (1 << 26)
+#define R500_RS_INST_TEX_ID(x) ((x) << R500_RS_INST_TEX_ID_SHIFT)
+#define R500_RS_INST_TEX_ADDR(x) ((x) << R500_RS_INST_TEX_ADDR_SHIFT)
+#define R500_RS_INST_COL_ID(x) ((x) << R500_RS_INST_COL_ID_SHIFT)
+#define R500_RS_INST_COL_ADDR(x) ((x) << R500_RS_INST_COL_ADDR_SHIFT)
/* These DWORDs control how vertex data is routed into fragment program
* registers, after interpolators.
# define R300_RS_INST_TEX_ID(x) ((x) << 0)
# define R300_RS_INST_TEX_CN_WRITE (1 << 3)
# define R300_RS_INST_TEX_ADDR_SHIFT 6
+# define R300_RS_INST_TEX_ADDR(x) ((x) << R300_RS_INST_TEX_ADDR_SHIFT)
# define R300_RS_INST_COL_ID(x) ((x) << 11)
# define R300_RS_INST_COL_CN_WRITE (1 << 14)
# define R300_RS_INST_COL_ADDR_SHIFT 17
+# define R300_RS_INST_COL_ADDR(x) ((x) << R300_RS_INST_COL_ADDR_SHIFT)
# define R300_RS_INST_TEX_ADJ (1 << 22)
# define R300_RS_COL_BIAS_UNUSED_SHIFT 23
# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6)
+#define R300_SC_EDGERULE 0x43a8
/* BEGIN: Scissors and cliprects */
* For some reason, the top-left corner of the framebuffer is at (1440, 1440)
* for the purpose of clipping and scissors.
*/
-#define R300_RE_CLIPRECT_TL_0 0x43B0
-#define R300_RE_CLIPRECT_BR_0 0x43B4
-#define R300_RE_CLIPRECT_TL_1 0x43B8
-#define R300_RE_CLIPRECT_BR_1 0x43BC
-#define R300_RE_CLIPRECT_TL_2 0x43C0
-#define R300_RE_CLIPRECT_BR_2 0x43C4
-#define R300_RE_CLIPRECT_TL_3 0x43C8
-#define R300_RE_CLIPRECT_BR_3 0x43CC
+#define R300_SC_CLIPRECT_TL_0 0x43B0
+#define R300_SC_CLIPRECT_BR_0 0x43B4
+#define R300_SC_CLIPRECT_TL_1 0x43B8
+#define R300_SC_CLIPRECT_BR_1 0x43BC
+#define R300_SC_CLIPRECT_TL_2 0x43C0
+#define R300_SC_CLIPRECT_BR_2 0x43C4
+#define R300_SC_CLIPRECT_TL_3 0x43C8
+#define R300_SC_CLIPRECT_BR_3 0x43CC
# define R300_CLIPRECT_OFFSET 1440
# define R300_CLIPRECT_MASK 0x1FFF
# define R300_CLIPRECT_X_SHIFT 0
# define R300_CLIPRECT_X_MASK (0x1FFF << 0)
# define R300_CLIPRECT_Y_SHIFT 13
# define R300_CLIPRECT_Y_MASK (0x1FFF << 13)
-#define R300_RE_CLIPRECT_CNTL 0x43D0
+#define R300_SC_CLIP_RULE 0x43D0
# define R300_CLIP_OUT (1 << 0)
# define R300_CLIP_0 (1 << 1)
# define R300_CLIP_1 (1 << 2)
/* gap */
-#define R300_RE_SCISSORS_TL 0x43E0
-#define R300_RE_SCISSORS_BR 0x43E4
+#define R300_SC_SCISSORS_TL 0x43E0
+#define R300_SC_SCISSORS_BR 0x43E4
# define R300_SCISSORS_OFFSET 1440
# define R300_SCISSORS_X_SHIFT 0
# define R300_SCISSORS_X_MASK (0x1FFF << 0)
# define R300_TX_WRAP_S_MASK (7 << 0)
# define R300_TX_WRAP_T_SHIFT 3
# define R300_TX_WRAP_T_MASK (7 << 3)
-# define R300_TX_WRAP_Q_SHIFT 6
-# define R300_TX_WRAP_Q_MASK (7 << 6)
+# define R300_TX_WRAP_R_SHIFT 6
+# define R300_TX_WRAP_R_MASK (7 << 6)
# define R300_TX_MAG_FILTER_4 (0 << 9)
# define R300_TX_MAG_FILTER_NEAREST (1 << 9)
# define R300_TX_MAG_FILTER_LINEAR (2 << 9)
+# define R300_TX_MAG_FILTER_ANISO (3 << 9)
# define R300_TX_MAG_FILTER_MASK (3 << 9)
# define R300_TX_MIN_FILTER_NEAREST (1 << 11)
# define R300_TX_MIN_FILTER_LINEAR (2 << 11)
-# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) /* TODO: use spec */
-# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) /* TODO: use spec */
-# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) /* TODO: use spec */
-# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) /* TODO: use spec */
-
-/* NOTE: NEAREST doesnt seem to exist.
- * Im not seting MAG_FILTER_MASK and (3 << 11) on for all
- * anisotropy modes because that would void selected mag filter
- */
-# define R300_TX_MIN_FILTER_ANISO_NEAREST (0 << 13)
-# define R300_TX_MIN_FILTER_ANISO_LINEAR (0 << 13)
-# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (1 << 13)
-# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR (2 << 13)
-# define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) )
-# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21)
-# define R300_TX_MAX_ANISO_2_TO_1 (2 << 21)
-# define R300_TX_MAX_ANISO_4_TO_1 (4 << 21)
-# define R300_TX_MAX_ANISO_8_TO_1 (6 << 21)
-# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21)
-# define R300_TX_MAX_ANISO_MASK (14 << 21)
+# define R300_TX_MIN_FILTER_ANISO (3 << 11)
+# define R300_TX_MIN_FILTER_MASK (3 << 11)
+# define R300_TX_MIN_FILTER_MIP_NONE (0 << 13)
+# define R300_TX_MIN_FILTER_MIP_NEAREST (1 << 13)
+# define R300_TX_MIN_FILTER_MIP_LINEAR (2 << 13)
+# define R300_TX_MIN_FILTER_MIP_MASK (3 << 13)
+# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21)
+# define R300_TX_MAX_ANISO_2_TO_1 (1 << 21)
+# define R300_TX_MAX_ANISO_4_TO_1 (2 << 21)
+# define R300_TX_MAX_ANISO_8_TO_1 (3 << 21)
+# define R300_TX_MAX_ANISO_16_TO_1 (4 << 21)
+# define R300_TX_MAX_ANISO_MASK (7 << 21)
#define R300_TX_FILTER1_0 0x4440
# define R300_CHROMA_KEY_MODE_DISABLE 0
# define R300_CHROMA_KEY_BLEND 2
# define R300_MC_ROUND_NORMAL (0<<2)
# define R300_MC_ROUND_MPEG4 (1<<2)
-# define R300_LOD_BIAS_MASK 0x1fff
+# define R300_LOD_BIAS_SHIFT 3
+# define R300_LOD_BIAS_MASK 0x1ff8
# define R300_EDGE_ANISO_EDGE_DIAG (0<<13)
# define R300_EDGE_ANISO_EDGE_ONLY (1<<13)
# define R300_MC_COORD_TRUNCATE_DISABLE (0<<14)
They are given meanings as R, G, B and Alpha by the swizzle
specification */
# define R300_TX_FORMAT_X8 0x0
-# define R500_TX_FORMAT_X1 0x0 // bit set in format 2
+# define R500_TX_FORMAT_X1 0x0 // bit set in format 2
# define R300_TX_FORMAT_X16 0x1
-# define R500_TX_FORMAT_X1_REV 0x0 // bit set in format 2
+# define R500_TX_FORMAT_X1_REV 0x0 // bit set in format 2
# define R300_TX_FORMAT_Y4X4 0x2
# define R300_TX_FORMAT_Y8X8 0x3
# define R300_TX_FORMAT_Y16X16 0x4
# define R300_TX_FORMAT_X32 0x1e
/* 0x16 - some 16 bit green format.. ?? */
-# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */
-# define R300_TX_FORMAT_CUBIC_MAP (1 << 26)
+# define R300_TX_FORMAT_3D (1 << 25)
+# define R300_TX_FORMAT_CUBIC_MAP (2 << 25)
/* gap */
/* Floating point formats */
# define R500_SEL_FILTER4_TC3 (3 << 18)
#define R300_TX_OFFSET_0 0x4540
+#define R300_TX_OFFSET_1 0x4544
+#define R300_TX_OFFSET_2 0x4548
+#define R300_TX_OFFSET_3 0x454C
+#define R300_TX_OFFSET_4 0x4550
+#define R300_TX_OFFSET_5 0x4554
+#define R300_TX_OFFSET_6 0x4558
+#define R300_TX_OFFSET_7 0x455C
/* BEGIN: Guess from R200 */
# define R300_TXO_ENDIAN_NO_SWAP (0 << 0)
# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0)
* offsets into the respective instruction streams, while *_END points to the
* last instruction relative to this offset.
*/
-#define R300_PFS_CNTL_0 0x4600
+#define R300_US_CONFIG 0x4600
# define R300_PFS_CNTL_LAST_NODES_SHIFT 0
# define R300_PFS_CNTL_LAST_NODES_MASK (3 << 0)
# define R300_PFS_CNTL_FIRST_NODE_HAS_TEX (1 << 3)
-#define R300_PFS_CNTL_1 0x4604
+#define R300_US_PIXSIZE 0x4604
/* There is an unshifted value here which has so far always been equal to the
* index of the highest used temporary register.
*/
-#define R300_PFS_CNTL_2 0x4608
+#define R300_US_CODE_OFFSET 0x4608
# define R300_PFS_CNTL_ALU_OFFSET_SHIFT 0
# define R300_PFS_CNTL_ALU_OFFSET_MASK (63 << 0)
# define R300_PFS_CNTL_ALU_END_SHIFT 6
# define R300_PFS_CNTL_ALU_END_MASK (63 << 6)
-# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 12
-# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 12) /* GUESS */
+# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 13
+# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 13)
# define R300_PFS_CNTL_TEX_END_SHIFT 18
-# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* GUESS */
+# define R300_PFS_CNTL_TEX_END_MASK (31 << 18)
/* gap */
*
* Offsets are relative to the master offset from PFS_CNTL_2.
*/
-#define R300_PFS_NODE_0 0x4610
-#define R300_PFS_NODE_1 0x4614
-#define R300_PFS_NODE_2 0x4618
-#define R300_PFS_NODE_3 0x461C
-# define R300_PFS_NODE_ALU_OFFSET_SHIFT 0
-# define R300_PFS_NODE_ALU_OFFSET_MASK (63 << 0)
-# define R300_PFS_NODE_ALU_END_SHIFT 6
-# define R300_PFS_NODE_ALU_END_MASK (63 << 6)
-# define R300_PFS_NODE_TEX_OFFSET_SHIFT 12
-# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12)
-# define R300_PFS_NODE_TEX_END_SHIFT 17
-# define R300_PFS_NODE_TEX_END_MASK (31 << 17)
-# define R300_PFS_NODE_OUTPUT_COLOR (1 << 22)
-# define R300_PFS_NODE_OUTPUT_DEPTH (1 << 23)
+#define R300_US_CODE_ADDR_0 0x4610
+#define R300_US_CODE_ADDR_1 0x4614
+#define R300_US_CODE_ADDR_2 0x4618
+#define R300_US_CODE_ADDR_3 0x461C
+# define R300_ALU_START_SHIFT 0
+# define R300_ALU_START_MASK (63 << 0)
+# define R300_ALU_SIZE_SHIFT 6
+# define R300_ALU_SIZE_MASK (63 << 6)
+# define R300_TEX_START_SHIFT 12
+# define R300_TEX_START_MASK (31 << 12)
+# define R300_TEX_SIZE_SHIFT 17
+# define R300_TEX_SIZE_MASK (31 << 17)
+# define R300_RGBA_OUT (1 << 22)
+# define R300_W_OUT (1 << 23)
/* TEX
* As far as I can tell, texture instructions cannot write into output
* registers directly. A subsequent ALU instruction is always necessary,
* even if it's just MAD o0, r0, 1, 0
*/
-#define R300_PFS_TEXI_0 0x4620
-# define R300_FPITX_SRC_SHIFT 0
-# define R300_FPITX_SRC_MASK (31 << 0)
- /* GUESS */
-# define R300_FPITX_SRC_CONST (1 << 5)
-# define R300_FPITX_DST_SHIFT 6
-# define R300_FPITX_DST_MASK (31 << 6)
-# define R300_FPITX_IMAGE_SHIFT 11
- /* GUESS based on layout and native limits */
-# define R300_FPITX_IMAGE_MASK (15 << 11)
-/* Unsure if these are opcodes, or some kind of bitfield, but this is how
- * they were set when I checked
- */
-# define R300_FPITX_OPCODE_SHIFT 15
-# define R300_FPITX_OP_TEX 1
-# define R300_FPITX_OP_KIL 2
-# define R300_FPITX_OP_TXP 3
-# define R300_FPITX_OP_TXB 4
-# define R300_FPITX_OPCODE_MASK (7 << 15)
+#define R300_US_TEX_INST_0 0x4620
+# define R300_SRC_ADDR_SHIFT 0
+# define R300_SRC_ADDR_MASK (31 << 0)
+# define R300_DST_ADDR_SHIFT 6
+# define R300_DST_ADDR_MASK (31 << 6)
+# define R300_TEX_ID_SHIFT 11
+# define R300_TEX_ID_MASK (15 << 11)
+# define R300_TEX_INST_SHIFT 15
+# define R300_TEX_OP_NOP 0
+# define R300_TEX_OP_LD 1
+# define R300_TEX_OP_KIL 2
+# define R300_TEX_OP_TXP 3
+# define R300_TEX_OP_TXB 4
+# define R300_TEX_INST_MASK (7 << 15)
/* Output format from the unfied shader */
-#define R500_US_OUT_FMT 0x46A4
-# define R500_US_OUT_FMT_C4_8 (0 << 0)
-# define R500_US_OUT_FMT_C4_10 (1 << 0)
-# define R500_US_OUT_FMT_C4_10_GAMMA (2 << 0)
-# define R500_US_OUT_FMT_C_16 (3 << 0)
-# define R500_US_OUT_FMT_C2_16 (4 << 0)
-# define R500_US_OUT_FMT_C4_16 (5 << 0)
-# define R500_US_OUT_FMT_C_16_MPEG (6 << 0)
-# define R500_US_OUT_FMT_C2_16_MPEG (7 << 0)
-# define R500_US_OUT_FMT_C2_4 (8 << 0)
-# define R500_US_OUT_FMT_C_3_3_2 (9 << 0)
-# define R500_US_OUT_FMT_C_6_5_6 (10 << 0)
-# define R500_US_OUT_FMT_C_11_11_10 (11 << 0)
-# define R500_US_OUT_FMT_C_10_11_11 (12 << 0)
-# define R500_US_OUT_FMT_C_2_10_10_10 (13 << 0)
+#define R300_US_OUT_FMT 0x46A4
+# define R300_US_OUT_FMT_C4_8 (0 << 0)
+# define R300_US_OUT_FMT_C4_10 (1 << 0)
+# define R300_US_OUT_FMT_C4_10_GAMMA (2 << 0)
+# define R300_US_OUT_FMT_C_16 (3 << 0)
+# define R300_US_OUT_FMT_C2_16 (4 << 0)
+# define R300_US_OUT_FMT_C4_16 (5 << 0)
+# define R300_US_OUT_FMT_C_16_MPEG (6 << 0)
+# define R300_US_OUT_FMT_C2_16_MPEG (7 << 0)
+# define R300_US_OUT_FMT_C2_4 (8 << 0)
+# define R300_US_OUT_FMT_C_3_3_2 (9 << 0)
+# define R300_US_OUT_FMT_C_6_5_6 (10 << 0)
+# define R300_US_OUT_FMT_C_11_11_10 (11 << 0)
+# define R300_US_OUT_FMT_C_10_11_11 (12 << 0)
+# define R300_US_OUT_FMT_C_2_10_10_10 (13 << 0)
/* reserved */
-# define R500_US_OUT_FMT_UNUSED (15 << 0)
-# define R500_US_OUT_FMT_C_16_FP (16 << 0)
-# define R500_US_OUT_FMT_C2_16_FP (17 << 0)
-# define R500_US_OUT_FMT_C4_16_FP (18 << 0)
-# define R500_US_OUT_FMT_C_32_FP (19 << 0)
-# define R500_US_OUT_FMT_C2_32_FP (20 << 0)
-# define R500_US_OUT_FMT_C4_32_FP (20 << 0)
+# define R300_US_OUT_FMT_UNUSED (15 << 0)
+# define R300_US_OUT_FMT_C_16_FP (16 << 0)
+# define R300_US_OUT_FMT_C2_16_FP (17 << 0)
+# define R300_US_OUT_FMT_C4_16_FP (18 << 0)
+# define R300_US_OUT_FMT_C_32_FP (19 << 0)
+# define R300_US_OUT_FMT_C2_32_FP (20 << 0)
+# define R300_US_OUT_FMT_C4_32_FP (20 << 0)
/* ALU
* The ALU instructions register blocks are enumerated according to the order
* - Set FPI0/FPI2_SPECIAL_LRP
* Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD
*/
-#define R300_PFS_INSTR1_0 0x46C0
-# define R300_FPI1_SRC0C_SHIFT 0
-# define R300_FPI1_SRC0C_MASK (31 << 0)
-# define R300_FPI1_SRC0C_CONST (1 << 5)
-# define R300_FPI1_SRC1C_SHIFT 6
-# define R300_FPI1_SRC1C_MASK (31 << 6)
-# define R300_FPI1_SRC1C_CONST (1 << 11)
-# define R300_FPI1_SRC2C_SHIFT 12
-# define R300_FPI1_SRC2C_MASK (31 << 12)
-# define R300_FPI1_SRC2C_CONST (1 << 17)
-# define R300_FPI1_SRC_MASK 0x0003ffff
-# define R300_FPI1_DSTC_SHIFT 18
-# define R300_FPI1_DSTC_MASK (31 << 18)
-# define R300_FPI1_DSTC_REG_MASK_SHIFT 23
-# define R300_FPI1_DSTC_REG_X (1 << 23)
-# define R300_FPI1_DSTC_REG_Y (1 << 24)
-# define R300_FPI1_DSTC_REG_Z (1 << 25)
-# define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT 26
-# define R300_FPI1_DSTC_OUTPUT_X (1 << 26)
-# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27)
-# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28)
-
-#define R300_PFS_INSTR3_0 0x47C0
-# define R300_FPI3_SRC0A_SHIFT 0
-# define R300_FPI3_SRC0A_MASK (31 << 0)
-# define R300_FPI3_SRC0A_CONST (1 << 5)
-# define R300_FPI3_SRC1A_SHIFT 6
-# define R300_FPI3_SRC1A_MASK (31 << 6)
-# define R300_FPI3_SRC1A_CONST (1 << 11)
-# define R300_FPI3_SRC2A_SHIFT 12
-# define R300_FPI3_SRC2A_MASK (31 << 12)
-# define R300_FPI3_SRC2A_CONST (1 << 17)
-# define R300_FPI3_SRC_MASK 0x0003ffff
-# define R300_FPI3_DSTA_SHIFT 18
-# define R300_FPI3_DSTA_MASK (31 << 18)
-# define R300_FPI3_DSTA_REG (1 << 23)
-# define R300_FPI3_DSTA_OUTPUT (1 << 24)
-# define R300_FPI3_DSTA_DEPTH (1 << 27)
-
-#define R300_PFS_INSTR0_0 0x48C0
-# define R300_FPI0_ARGC_SRC0C_XYZ 0
-# define R300_FPI0_ARGC_SRC0C_XXX 1
-# define R300_FPI0_ARGC_SRC0C_YYY 2
-# define R300_FPI0_ARGC_SRC0C_ZZZ 3
-# define R300_FPI0_ARGC_SRC1C_XYZ 4
-# define R300_FPI0_ARGC_SRC1C_XXX 5
-# define R300_FPI0_ARGC_SRC1C_YYY 6
-# define R300_FPI0_ARGC_SRC1C_ZZZ 7
-# define R300_FPI0_ARGC_SRC2C_XYZ 8
-# define R300_FPI0_ARGC_SRC2C_XXX 9
-# define R300_FPI0_ARGC_SRC2C_YYY 10
-# define R300_FPI0_ARGC_SRC2C_ZZZ 11
-# define R300_FPI0_ARGC_SRC0A 12
-# define R300_FPI0_ARGC_SRC1A 13
-# define R300_FPI0_ARGC_SRC2A 14
-# define R300_FPI0_ARGC_SRC1C_LRP 15
-# define R300_FPI0_ARGC_ZERO 20
-# define R300_FPI0_ARGC_ONE 21
- /* GUESS */
-# define R300_FPI0_ARGC_HALF 22
-# define R300_FPI0_ARGC_SRC0C_YZX 23
-# define R300_FPI0_ARGC_SRC1C_YZX 24
-# define R300_FPI0_ARGC_SRC2C_YZX 25
-# define R300_FPI0_ARGC_SRC0C_ZXY 26
-# define R300_FPI0_ARGC_SRC1C_ZXY 27
-# define R300_FPI0_ARGC_SRC2C_ZXY 28
-# define R300_FPI0_ARGC_SRC0CA_WZY 29
-# define R300_FPI0_ARGC_SRC1CA_WZY 30
-# define R300_FPI0_ARGC_SRC2CA_WZY 31
-
-# define R300_FPI0_ARG0C_SHIFT 0
-# define R300_FPI0_ARG0C_MASK (31 << 0)
-# define R300_FPI0_ARG0C_NEG (1 << 5)
-# define R300_FPI0_ARG0C_ABS (1 << 6)
-# define R300_FPI0_ARG1C_SHIFT 7
-# define R300_FPI0_ARG1C_MASK (31 << 7)
-# define R300_FPI0_ARG1C_NEG (1 << 12)
-# define R300_FPI0_ARG1C_ABS (1 << 13)
-# define R300_FPI0_ARG2C_SHIFT 14
-# define R300_FPI0_ARG2C_MASK (31 << 14)
-# define R300_FPI0_ARG2C_NEG (1 << 19)
-# define R300_FPI0_ARG2C_ABS (1 << 20)
-# define R300_FPI0_SPECIAL_LRP (1 << 21)
-# define R300_FPI0_OUTC_MAD (0 << 23)
-# define R300_FPI0_OUTC_DP3 (1 << 23)
-# define R300_FPI0_OUTC_DP4 (2 << 23)
-# define R300_FPI0_OUTC_MIN (4 << 23)
-# define R300_FPI0_OUTC_MAX (5 << 23)
-# define R300_FPI0_OUTC_CMPH (7 << 23)
-# define R300_FPI0_OUTC_CMP (8 << 23)
-# define R300_FPI0_OUTC_FRC (9 << 23)
-# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23)
-# define R300_FPI0_OUTC_SAT (1 << 30)
-# define R300_FPI0_INSERT_NOP (1 << 31)
-
-#define R300_PFS_INSTR2_0 0x49C0
-# define R300_FPI2_ARGA_SRC0C_X 0
-# define R300_FPI2_ARGA_SRC0C_Y 1
-# define R300_FPI2_ARGA_SRC0C_Z 2
-# define R300_FPI2_ARGA_SRC1C_X 3
-# define R300_FPI2_ARGA_SRC1C_Y 4
-# define R300_FPI2_ARGA_SRC1C_Z 5
-# define R300_FPI2_ARGA_SRC2C_X 6
-# define R300_FPI2_ARGA_SRC2C_Y 7
-# define R300_FPI2_ARGA_SRC2C_Z 8
-# define R300_FPI2_ARGA_SRC0A 9
-# define R300_FPI2_ARGA_SRC1A 10
-# define R300_FPI2_ARGA_SRC2A 11
-# define R300_FPI2_ARGA_SRC1A_LRP 15
-# define R300_FPI2_ARGA_ZERO 16
-# define R300_FPI2_ARGA_ONE 17
- /* GUESS */
-# define R300_FPI2_ARGA_HALF 18
-# define R300_FPI2_ARG0A_SHIFT 0
-# define R300_FPI2_ARG0A_MASK (31 << 0)
-# define R300_FPI2_ARG0A_NEG (1 << 5)
- /* GUESS */
-# define R300_FPI2_ARG0A_ABS (1 << 6)
-# define R300_FPI2_ARG1A_SHIFT 7
-# define R300_FPI2_ARG1A_MASK (31 << 7)
-# define R300_FPI2_ARG1A_NEG (1 << 12)
- /* GUESS */
-# define R300_FPI2_ARG1A_ABS (1 << 13)
-# define R300_FPI2_ARG2A_SHIFT 14
-# define R300_FPI2_ARG2A_MASK (31 << 14)
-# define R300_FPI2_ARG2A_NEG (1 << 19)
- /* GUESS */
-# define R300_FPI2_ARG2A_ABS (1 << 20)
-# define R300_FPI2_SPECIAL_LRP (1 << 21)
-# define R300_FPI2_OUTA_MAD (0 << 23)
-# define R300_FPI2_OUTA_DP4 (1 << 23)
-# define R300_FPI2_OUTA_MIN (2 << 23)
-# define R300_FPI2_OUTA_MAX (3 << 23)
-# define R300_FPI2_OUTA_CMP (6 << 23)
-# define R300_FPI2_OUTA_FRC (7 << 23)
-# define R300_FPI2_OUTA_EX2 (8 << 23)
-# define R300_FPI2_OUTA_LG2 (9 << 23)
-# define R300_FPI2_OUTA_RCP (10 << 23)
-# define R300_FPI2_OUTA_RSQ (11 << 23)
-# define R300_FPI2_OUTA_SAT (1 << 30)
-# define R300_FPI2_UNKNOWN_31 (1 << 31)
+#define R300_US_ALU_RGB_ADDR_0 0x46C0
+# define R300_ALU_SRC0C_SHIFT 0
+# define R300_ALU_SRC0C_MASK (31 << 0)
+# define R300_ALU_SRC0C_CONST (1 << 5)
+# define R300_ALU_SRC1C_SHIFT 6
+# define R300_ALU_SRC1C_MASK (31 << 6)
+# define R300_ALU_SRC1C_CONST (1 << 11)
+# define R300_ALU_SRC2C_SHIFT 12
+# define R300_ALU_SRC2C_MASK (31 << 12)
+# define R300_ALU_SRC2C_CONST (1 << 17)
+# define R300_ALU_SRC_MASK 0x0003ffff
+# define R300_ALU_DSTC_SHIFT 18
+# define R300_ALU_DSTC_MASK (31 << 18)
+# define R300_ALU_DSTC_REG_MASK_SHIFT 23
+# define R300_ALU_DSTC_REG_X (1 << 23)
+# define R300_ALU_DSTC_REG_Y (1 << 24)
+# define R300_ALU_DSTC_REG_Z (1 << 25)
+# define R300_ALU_DSTC_OUTPUT_MASK_SHIFT 26
+# define R300_ALU_DSTC_OUTPUT_X (1 << 26)
+# define R300_ALU_DSTC_OUTPUT_Y (1 << 27)
+# define R300_ALU_DSTC_OUTPUT_Z (1 << 28)
+
+#define R300_US_ALU_ALPHA_ADDR_0 0x47C0
+# define R300_ALU_SRC0A_SHIFT 0
+# define R300_ALU_SRC0A_MASK (31 << 0)
+# define R300_ALU_SRC0A_CONST (1 << 5)
+# define R300_ALU_SRC1A_SHIFT 6
+# define R300_ALU_SRC1A_MASK (31 << 6)
+# define R300_ALU_SRC1A_CONST (1 << 11)
+# define R300_ALU_SRC2A_SHIFT 12
+# define R300_ALU_SRC2A_MASK (31 << 12)
+# define R300_ALU_SRC2A_CONST (1 << 17)
+# define R300_ALU_SRC_MASK 0x0003ffff
+# define R300_ALU_DSTA_SHIFT 18
+# define R300_ALU_DSTA_MASK (31 << 18)
+# define R300_ALU_DSTA_REG (1 << 23)
+# define R300_ALU_DSTA_OUTPUT (1 << 24)
+# define R300_ALU_DSTA_DEPTH (1 << 27)
+
+#define R300_US_ALU_RGB_INST_0 0x48C0
+# define R300_ALU_ARGC_SRC0C_XYZ 0
+# define R300_ALU_ARGC_SRC0C_XXX 1
+# define R300_ALU_ARGC_SRC0C_YYY 2
+# define R300_ALU_ARGC_SRC0C_ZZZ 3
+# define R300_ALU_ARGC_SRC1C_XYZ 4
+# define R300_ALU_ARGC_SRC1C_XXX 5
+# define R300_ALU_ARGC_SRC1C_YYY 6
+# define R300_ALU_ARGC_SRC1C_ZZZ 7
+# define R300_ALU_ARGC_SRC2C_XYZ 8
+# define R300_ALU_ARGC_SRC2C_XXX 9
+# define R300_ALU_ARGC_SRC2C_YYY 10
+# define R300_ALU_ARGC_SRC2C_ZZZ 11
+# define R300_ALU_ARGC_SRC0A 12
+# define R300_ALU_ARGC_SRC1A 13
+# define R300_ALU_ARGC_SRC2A 14
+# define R300_ALU_ARGC_SRCP_XYZ 15
+# define R300_ALU_ARGC_SRCP_XXX 16
+# define R300_ALU_ARGC_SRCP_YYY 17
+# define R300_ALU_ARGC_SRCP_ZZZ 18
+# define R300_ALU_ARGC_SRCP_WWW 19
+# define R300_ALU_ARGC_ZERO 20
+# define R300_ALU_ARGC_ONE 21
+# define R300_ALU_ARGC_HALF 22
+# define R300_ALU_ARGC_SRC0C_YZX 23
+# define R300_ALU_ARGC_SRC1C_YZX 24
+# define R300_ALU_ARGC_SRC2C_YZX 25
+# define R300_ALU_ARGC_SRC0C_ZXY 26
+# define R300_ALU_ARGC_SRC1C_ZXY 27
+# define R300_ALU_ARGC_SRC2C_ZXY 28
+# define R300_ALU_ARGC_SRC0CA_WZY 29
+# define R300_ALU_ARGC_SRC1CA_WZY 30
+# define R300_ALU_ARGC_SRC2CA_WZY 31
+
+# define R300_ALU_ARG0C_SHIFT 0
+# define R300_ALU_ARG0C_MASK (31 << 0)
+# define R300_ALU_ARG0C_NOP (0 << 5)
+# define R300_ALU_ARG0C_NEG (1 << 5)
+# define R300_ALU_ARG0C_ABS (2 << 5)
+# define R300_ALU_ARG0C_NAB (3 << 5)
+# define R300_ALU_ARG1C_SHIFT 7
+# define R300_ALU_ARG1C_MASK (31 << 7)
+# define R300_ALU_ARG1C_NOP (0 << 12)
+# define R300_ALU_ARG1C_NEG (1 << 12)
+# define R300_ALU_ARG1C_ABS (2 << 12)
+# define R300_ALU_ARG1C_NAB (3 << 12)
+# define R300_ALU_ARG2C_SHIFT 14
+# define R300_ALU_ARG2C_MASK (31 << 14)
+# define R300_ALU_ARG2C_NOP (0 << 19)
+# define R300_ALU_ARG2C_NEG (1 << 19)
+# define R300_ALU_ARG2C_ABS (2 << 19)
+# define R300_ALU_ARG2C_NAB (3 << 19)
+# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21)
+# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21)
+# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21)
+# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21)
+
+# define R300_ALU_OUTC_MAD (0 << 23)
+# define R300_ALU_OUTC_DP3 (1 << 23)
+# define R300_ALU_OUTC_DP4 (2 << 23)
+# define R300_ALU_OUTC_D2A (3 << 23)
+# define R300_ALU_OUTC_MIN (4 << 23)
+# define R300_ALU_OUTC_MAX (5 << 23)
+# define R300_ALU_OUTC_CMPH (7 << 23)
+# define R300_ALU_OUTC_CMP (8 << 23)
+# define R300_ALU_OUTC_FRC (9 << 23)
+# define R300_ALU_OUTC_REPL_ALPHA (10 << 23)
+
+# define R300_ALU_OUTC_MOD_NOP (0 << 27)
+# define R300_ALU_OUTC_MOD_MUL2 (1 << 27)
+# define R300_ALU_OUTC_MOD_MUL4 (2 << 27)
+# define R300_ALU_OUTC_MOD_MUL8 (3 << 27)
+# define R300_ALU_OUTC_MOD_DIV2 (4 << 27)
+# define R300_ALU_OUTC_MOD_DIV4 (5 << 27)
+# define R300_ALU_OUTC_MOD_DIV8 (6 << 27)
+
+# define R300_ALU_OUTC_CLAMP (1 << 30)
+# define R300_ALU_INSERT_NOP (1 << 31)
+
+#define R300_US_ALU_ALPHA_INST_0 0x49C0
+# define R300_ALU_ARGA_SRC0C_X 0
+# define R300_ALU_ARGA_SRC0C_Y 1
+# define R300_ALU_ARGA_SRC0C_Z 2
+# define R300_ALU_ARGA_SRC1C_X 3
+# define R300_ALU_ARGA_SRC1C_Y 4
+# define R300_ALU_ARGA_SRC1C_Z 5
+# define R300_ALU_ARGA_SRC2C_X 6
+# define R300_ALU_ARGA_SRC2C_Y 7
+# define R300_ALU_ARGA_SRC2C_Z 8
+# define R300_ALU_ARGA_SRC0A 9
+# define R300_ALU_ARGA_SRC1A 10
+# define R300_ALU_ARGA_SRC2A 11
+# define R300_ALU_ARGA_SRCP_X 12
+# define R300_ALU_ARGA_SRCP_Y 13
+# define R300_ALU_ARGA_SRCP_Z 14
+# define R300_ALU_ARGA_SRCP_W 15
+
+# define R300_ALU_ARGA_ZERO 16
+# define R300_ALU_ARGA_ONE 17
+# define R300_ALU_ARGA_HALF 18
+# define R300_ALU_ARG0A_SHIFT 0
+# define R300_ALU_ARG0A_MASK (31 << 0)
+# define R300_ALU_ARG0A_NOP (0 << 5)
+# define R300_ALU_ARG0A_NEG (1 << 5)
+# define R300_ALU_ARG0A_ABS (2 << 5)
+# define R300_ALU_ARG0A_NAB (3 << 5)
+# define R300_ALU_ARG1A_SHIFT 7
+# define R300_ALU_ARG1A_MASK (31 << 7)
+# define R300_ALU_ARG1A_NOP (0 << 12)
+# define R300_ALU_ARG1A_NEG (1 << 12)
+# define R300_ALU_ARG1A_ABS (2 << 12)
+# define R300_ALU_ARG1A_NAB (3 << 12)
+# define R300_ALU_ARG2A_SHIFT 14
+# define R300_ALU_ARG2A_MASK (31 << 14)
+# define R300_ALU_ARG2A_NOP (0 << 19)
+# define R300_ALU_ARG2A_NEG (1 << 19)
+# define R300_ALU_ARG2A_ABS (2 << 19)
+# define R300_ALU_ARG2A_NAB (3 << 19)
+# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21)
+# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21)
+# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21)
+# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21)
+
+# define R300_ALU_OUTA_MAD (0 << 23)
+# define R300_ALU_OUTA_DP4 (1 << 23)
+# define R300_ALU_OUTA_MIN (2 << 23)
+# define R300_ALU_OUTA_MAX (3 << 23)
+# define R300_ALU_OUTA_CND (5 << 23)
+# define R300_ALU_OUTA_CMP (6 << 23)
+# define R300_ALU_OUTA_FRC (7 << 23)
+# define R300_ALU_OUTA_EX2 (8 << 23)
+# define R300_ALU_OUTA_LG2 (9 << 23)
+# define R300_ALU_OUTA_RCP (10 << 23)
+# define R300_ALU_OUTA_RSQ (11 << 23)
+
+# define R300_ALU_OUTA_MOD_NOP (0 << 27)
+# define R300_ALU_OUTA_MOD_MUL2 (1 << 27)
+# define R300_ALU_OUTA_MOD_MUL4 (2 << 27)
+# define R300_ALU_OUTA_MOD_MUL8 (3 << 27)
+# define R300_ALU_OUTA_MOD_DIV2 (4 << 27)
+# define R300_ALU_OUTA_MOD_DIV4 (5 << 27)
+# define R300_ALU_OUTA_MOD_DIV8 (6 << 27)
+
+# define R300_ALU_OUTA_CLAMP (1 << 30)
/* END: Fragment program instruction set */
/* Fog: Fog Blending Enable */
-#define FG_FOG_BLEND 0x4bc0
-# define FG_FOG_BLEND_DISABLE (0 << 0)
-# define FG_FOG_BLEND_ENABLE (1 << 0)
-# define FG_FOG_BLEND_FN_LINEAR (0 << 1)
-# define FG_FOG_BLEND_FN_EXP (1 << 1)
-# define FG_FOG_BLEND_FN_EXP2 (2 << 1)
-# define FG_FOG_BLEND_FN_CONSTANT (3 << 1)
-# define FG_FOG_BLEND_FN_MASK 0x00000006
+#define R300_FG_FOG_BLEND 0x4bc0
+# define R300_FG_FOG_BLEND_DISABLE (0 << 0)
+# define R300_FG_FOG_BLEND_ENABLE (1 << 0)
+# define R300_FG_FOG_BLEND_FN_LINEAR (0 << 1)
+# define R300_FG_FOG_BLEND_FN_EXP (1 << 1)
+# define R300_FG_FOG_BLEND_FN_EXP2 (2 << 1)
+# define R300_FG_FOG_BLEND_FN_CONSTANT (3 << 1)
+# define R300_FG_FOG_BLEND_FN_MASK (3 << 1)
/* Fog: Red Component of Fog Color */
-#define FG_FOG_COLOR_R 0x4bc8
+#define R300_FG_FOG_COLOR_R 0x4bc8
/* Fog: Green Component of Fog Color */
-#define FG_FOG_COLOR_G 0x4bcc
+#define R300_FG_FOG_COLOR_G 0x4bcc
/* Fog: Blue Component of Fog Color */
-#define FG_FOG_COLOR_B 0x4bd0
-# define FG_FOG_COLOR_MASK 0x000001ff
+#define R300_FG_FOG_COLOR_B 0x4bd0
+# define R300_FG_FOG_COLOR_MASK 0x000003ff
/* Fog: Constant Factor for Fog Blending */
-#define FG_FOG_FACTOR 0x4bc4
-# define FG_FOG_FACTOR_MASK 0x000001ff
+#define R300_FG_FOG_FACTOR 0x4bc4
+# define FG_FOG_FACTOR_MASK 0x000003ff
/* Fog: Alpha function */
-#define FG_ALPHA_FUNC 0x4bd4
-# define R300_REF_ALPHA_MASK 0x000000ff
-# define FG_ALPHA_FUNC_NEVER (0 << 8)
-# define FG_ALPHA_FUNC_LESS (1 << 8)
-# define FG_ALPHA_FUNC_EQUAL (2 << 8)
-# define FG_ALPHA_FUNC_LE (3 << 8)
-# define FG_ALPHA_FUNC_GREATER (4 << 8)
-# define FG_ALPHA_FUNC_NOTEQUAL (5 << 8)
-# define FG_ALPHA_FUNC_GE (6 << 8)
-# define FG_ALPHA_FUNC_ALWAYS (7 << 8)
-# define R300_ALPHA_TEST_OP_MASK (7 << 8)
-# define FG_ALPHA_FUNC_DISABLE (0 << 11)
-# define FG_ALPHA_FUNC_ENABLE (1 << 11)
-# define FG_ALPHA_FUNC_10BIT (0 << 12)
-# define FG_ALPHA_FUNC_8BIT (1 << 12)
-/* gap in AMD spec */
-# define FG_ALPHA_FUNC_MASK_DISABLE (0 << 16)
-# define FG_ALPHA_FUNC_MASK_ENABLE (1 << 16)
-# define FG_ALPHA_FUNC_CFG_2_OF_4 (0 << 17)
-# define FG_ALPHA_FUNC_CFG_3_OF_6 (1 << 17)
-/* gap in AMD spec */
-# define FG_ALPHA_FUNC_DITH_DISABLE (0 << 20)
-# define FG_ALPHA_FUNC_DITH_ENABLE (1 << 20)
-/* gap in AMD spec */
-# define FG_ALPHA_FUNC_OFFSET_DISABLE (0 << 24) /* Not supported in R520. Default R300 and RV350 behaviour. */
-# define FG_ALPHA_FUNC_OFFSET_ENABLE (1 << 24) /* Not supported in R520 */
-# define FG_ALPHA_FUNC_DISC_ZERO_MASK_DISABLE (0 << 25)
-# define FG_ALPHA_FUNC_DISC_ZERO_MASK_ENABLE (1 << 25)
-/* gap in AMD spec */
-# define FG_ALPHA_FUNC_FP16_DISABLE (0 << 28)
-# define FG_ALPHA_FUNC_FP16_ENABLE (1 << 28)
-/* gap in AMD spec */
+#define R300_FG_ALPHA_FUNC 0x4bd4
+# define R300_FG_ALPHA_FUNC_VAL_MASK 0x000000ff
+# define R300_FG_ALPHA_FUNC_NEVER (0 << 8)
+# define R300_FG_ALPHA_FUNC_LESS (1 << 8)
+# define R300_FG_ALPHA_FUNC_EQUAL (2 << 8)
+# define R300_FG_ALPHA_FUNC_LE (3 << 8)
+# define R300_FG_ALPHA_FUNC_GREATER (4 << 8)
+# define R300_FG_ALPHA_FUNC_NOTEQUAL (5 << 8)
+# define R300_FG_ALPHA_FUNC_GE (6 << 8)
+# define R300_FG_ALPHA_FUNC_ALWAYS (7 << 8)
+# define R300_ALPHA_TEST_OP_MASK (7 << 8)
+# define R300_FG_ALPHA_FUNC_DISABLE (0 << 11)
+# define R300_FG_ALPHA_FUNC_ENABLE (1 << 11)
+
+# define R500_FG_ALPHA_FUNC_10BIT (0 << 12)
+# define R500_FG_ALPHA_FUNC_8BIT (1 << 12)
+
+# define R300_FG_ALPHA_FUNC_MASK_DISABLE (0 << 16)
+# define R300_FG_ALPHA_FUNC_MASK_ENABLE (1 << 16)
+# define R300_FG_ALPHA_FUNC_CFG_2_OF_4 (0 << 17)
+# define R300_FG_ALPHA_FUNC_CFG_3_OF_6 (1 << 17)
+
+# define R300_FG_ALPHA_FUNC_DITH_DISABLE (0 << 20)
+# define R300_FG_ALPHA_FUNC_DITH_ENABLE (1 << 20)
+
+# define R500_FG_ALPHA_FUNC_OFFSET_DISABLE (0 << 24)
+# define R500_FG_ALPHA_FUNC_OFFSET_ENABLE (1 << 24) /* Not supported in R520 */
+# define R500_FG_ALPHA_FUNC_DISC_ZERO_MASK_DISABLE (0 << 25)
+# define R500_FG_ALPHA_FUNC_DISC_ZERO_MASK_ENABLE (1 << 25)
+
+# define R500_FG_ALPHA_FUNC_FP16_DISABLE (0 << 28)
+# define R500_FG_ALPHA_FUNC_FP16_ENABLE (1 << 28)
+
/* Fog: Where does the depth come from? */
#define R300_FG_DEPTH_SRC 0x4bd8
# define R300_FG_DEPTH_SRC_SHADER (1 << 0)
/* Fog: Alpha Compare Value */
-#define FG_ALPHA_VALUE 0x4be0
-# define FG_ALPHA_VALUE_MASK 0x0000ffff
+#define R500_FG_ALPHA_VALUE 0x4be0
+# define R500_FG_ALPHA_VALUE_MASK 0x0000ffff
/* gap */
#define R300_PFS_PARAM_0_Y 0x4C04
#define R300_PFS_PARAM_0_Z 0x4C08
#define R300_PFS_PARAM_0_W 0x4C0C
-/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */
+/* last consts */
#define R300_PFS_PARAM_31_X 0x4DF0
#define R300_PFS_PARAM_31_Y 0x4DF4
#define R300_PFS_PARAM_31_Z 0x4DF8
/* Unpipelined. */
#define R300_RB3D_CCTL 0x4e00
-/* gap in AMD docs */
# define R300_RB3D_CCTL_NUM_MULTIWRITES_1_BUFFER (0 << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_2_BUFFERS (1 << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_3_BUFFERS (2 << 5)
# define R300_RB3D_CCTL_NUM_MULTIWRITES_4_BUFFERS (3 << 5)
# define R300_RB3D_CCTL_CLRCMP_FLIPE_DISABLE (0 << 7)
# define R300_RB3D_CCTL_CLRCMP_FLIPE_ENABLE (1 << 7)
-/* gap in AMD docs */
# define R300_RB3D_CCTL_AA_COMPRESSION_DISABLE (0 << 9)
# define R300_RB3D_CCTL_AA_COMPRESSION_ENABLE (1 << 9)
# define R300_RB3D_CCTL_CMASK_DISABLE (0 << 10)
#define R300_RB3D_CBLEND 0x4E04
#define R300_RB3D_ABLEND 0x4E08
/* the following only appear in CBLEND */
-# define R300_BLEND_ENABLE (1 << 0)
-# define R300_BLEND_UNKNOWN (3 << 1)
-# define R300_BLEND_NO_SEPARATE (1 << 3)
+# define R300_ALPHA_BLEND_ENABLE (1 << 0)
+# define R300_SEPARATE_ALPHA_ENABLE (1 << 1)
+# define R300_READ_ENABLE (1 << 2)
+# define R300_DISCARD_SRC_PIXELS_DIS (0 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_0 (1 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_COLOR_0 (2 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_COLOR_0 (3 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_1 (4 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_COLOR_1 (5 << 3)
+# define R300_DISCARD_SRC_PIXELS_SRC_ALPHA_COLOR_1 (6 << 3)
+
/* the following are shared between CBLEND and ABLEND */
# define R300_FCN_MASK (3 << 12)
# define R300_COMB_FCN_ADD_CLAMP (0 << 12)
/* Color Buffer Address Offset of multibuffer 0. Unpipelined. */
#define R300_RB3D_COLOROFFSET0 0x4E28
-# define R300_COLOROFFSET_MASK 0xFFFFFFF0 /* GUESS */
+# define R300_COLOROFFSET_MASK 0xFFFFFFE0
/* Color Buffer Address Offset of multibuffer 1. Unpipelined. */
#define R300_RB3D_COLOROFFSET1 0x4E2C
/* Color Buffer Address Offset of multibuffer 2. Unpipelined. */
* Bit 18: Extremely weird tile like, but some pixels duplicated?
*/
#define R300_RB3D_COLORPITCH0 0x4E38
-# define R300_COLORPITCH_MASK 0x00001FF8 /* GUESS, should be 13:1 */
+# define R300_COLORPITCH_MASK 0x00003FFE
# define R300_COLOR_TILE_DISABLE (0 << 16)
# define R300_COLOR_TILE_ENABLE (1 << 16)
# define R300_COLOR_MICROTILE_DISABLE (0 << 17)
# define R300_COLOR_ENDIAN_WORD_SWAP (1 << 19)
# define R300_COLOR_ENDIAN_DWORD_SWAP (2 << 19)
# define R300_COLOR_ENDIAN_HALF_DWORD_SWAP (3 << 19)
-# define R300_COLOR_FORMAT_ARGB10101010 (0 << 21)
-# define R300_COLOR_FORMAT_UV1010 (1 << 21)
-# define R300_COLOR_FORMAT_CI8 (2 << 21) /* 2D only */
+# define R500_COLOR_FORMAT_ARGB10101010 (0 << 21)
+# define R500_COLOR_FORMAT_UV1010 (1 << 21)
+# define R500_COLOR_FORMAT_CI8 (2 << 21) /* 2D only */
# define R300_COLOR_FORMAT_ARGB1555 (3 << 21)
# define R300_COLOR_FORMAT_RGB565 (4 << 21)
-# define R300_COLOR_FORMAT_ARGB2101010 (5 << 21)
+# define R500_COLOR_FORMAT_ARGB2101010 (5 << 21)
# define R300_COLOR_FORMAT_ARGB8888 (6 << 21)
# define R300_COLOR_FORMAT_ARGB32323232 (7 << 21)
/* reserved */
# define R300_COLOR_FORMAT_VYUY (11 << 21)
# define R300_COLOR_FORMAT_YVYU (12 << 21)
# define R300_COLOR_FORMAT_UV88 (13 << 21)
-# define R300_COLOR_FORMAT_I10 (14 << 21)
+# define R500_COLOR_FORMAT_I10 (14 << 21)
# define R300_COLOR_FORMAT_ARGB4444 (15 << 21)
#define R300_RB3D_COLORPITCH1 0x4E3C
#define R300_RB3D_COLORPITCH2 0x4E40
* Set to 0A before 3D operations, set to 02 afterwards.
*/
#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c
-# define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT (0 << 0)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT_1 (1 << 0)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D (2 << 0)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D_1 (3 << 0)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT (0 << 2)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT_1 (1 << 2)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS (2 << 2)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS_1 (3 << 2)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FINISH_NO_SIGNAL (0 << 4)
-# define RB3D_DSTCACHE_CTLSTAT_DC_FINISH_SIGNAL (1 << 4)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT (0 << 0)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT_1 (1 << 0)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D (2 << 0)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D_1 (3 << 0)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT (0 << 2)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT_1 (1 << 2)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS (2 << 2)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS_1 (3 << 2)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FINISH_NO_SIGNAL (0 << 4)
+# define R300_RB3D_DSTCACHE_CTLSTAT_DC_FINISH_SIGNAL (1 << 4)
#define R300_RB3D_DITHER_CTL 0x4E50
# define R300_RB3D_DITHER_CTL_DITHER_MODE_TRUNCATE (0 << 0)
/* Resolve buffer destination address. The cache must be empty before changing
* this register if the cb is in resolve mode. Unpipelined
*/
-#define RB3D_AARESOLVE_OFFSET 0x4e80
-# define RB3D_AARESOLVE_OFFSET_SHIFT 5
-# define RB3D_AARESOLVE_OFFSET_MASK 0xffffffe0 /* At least according to the calculations of Christoph Brill */
+#define R300_RB3D_AARESOLVE_OFFSET 0x4e80
+# define R300_RB3D_AARESOLVE_OFFSET_SHIFT 5
+# define R300_RB3D_AARESOLVE_OFFSET_MASK 0xffffffe0 /* At least according to the calculations of Christoph Brill */
/* Resolve Buffer Pitch and Tiling Control. The cache must be empty before
* changing this register if the cb is in resolve mode. Unpipelined
*/
-#define RB3D_AARESOLVE_PITCH 0x4e84
-# define RB3D_AARESOLVE_PITCH_SHIFT 1
-# define RB3D_AARESOLVE_PITCH_MASK 0x00003ffe /* At least according to the calculations of Christoph Brill */
+#define R300_RB3D_AARESOLVE_PITCH 0x4e84
+# define R300_RB3D_AARESOLVE_PITCH_SHIFT 1
+# define R300_RB3D_AARESOLVE_PITCH_MASK 0x00003ffe /* At least according to the calculations of Christoph Brill */
/* Resolve Buffer Control. Unpipelined */
-#define RB3D_AARESOLVE_CTL 0x4e88
-# define RB3D_AARESOLVE_CTL_AARESOLVE_MODE_NORMAL (0 << 0)
-# define RB3D_AARESOLVE_CTL_AARESOLVE_MODE_RESOLVE (1 << 0)
-# define RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_10 (0 << 1)
-# define RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_22 (1 << 1)
-# define RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_SAMPLE0 (0 << 2)
-# define RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_AVERAGE (1 << 2)
-
+#define R300_RB3D_AARESOLVE_CTL 0x4e88
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_MODE_NORMAL (0 << 0)
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_MODE_RESOLVE (1 << 0)
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_10 (0 << 1)
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_22 (1 << 1)
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_SAMPLE0 (0 << 2)
+# define R300_RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_AVERAGE (1 << 2)
+
/* Discard src pixels less than or equal to threshold. */
-#define RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD 0x4ea0
+#define R500_RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD 0x4ea0
/* Discard src pixels greater than or equal to threshold. */
-#define RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD 0x4ea4
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_SHIFT 0
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_MASK 0x000000ff
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_SHIFT 8
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_MASK 0x0000ff00
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_SHIFT 16
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_MASK 0x00ff0000
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_SHIFT 24
-# define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_MASK 0xff000000
+#define R500_RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD 0x4ea4
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_SHIFT 0
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_MASK 0x000000ff
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_SHIFT 8
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_MASK 0x0000ff00
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_SHIFT 16
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_MASK 0x00ff0000
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_SHIFT 24
+# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_MASK 0xff000000
/* 3D ROP Control. Stalls the 2d/3d datapath until it is idle. */
-#define RB3D_ROPCNTL 0x4e18
-/* TODO: fill in content here */
+#define R300_RB3D_ROPCNTL 0x4e18
+# define R300_RB3D_ROPCNTL_ROP_ENABLE 0x00000004
+# define R300_RB3D_ROPCNTL_ROP_MASK (15 << 8)
+# define R300_RB3D_ROPCNTL_ROP_SHIFT 8
/* Color Compare Flip. Stalls the 2d/3d datapath until it is idle. */
-#define RB3D_CLRCMP_FLIPE 0x4e1c
+#define R300_RB3D_CLRCMP_FLIPE 0x4e1c
/* Sets the fifo sizes */
-#define RB3D_FIFO_SIZE 0x4ef4
-# define RB3D_FIFO_SIZE_OP_FIFO_SIZE_FULL (0 << 0)
-# define RB3D_FIFO_SIZE_OP_FIFO_SIZE_HALF (1 << 0)
-# define RB3D_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0)
-# define RB3D_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (3 << 0)
-/* gap in AMD spec */
+#define R500_RB3D_FIFO_SIZE 0x4ef4
+# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_FULL (0 << 0)
+# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_HALF (1 << 0)
+# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0)
+# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (3 << 0)
/* Constant color used by the blender. Pipelined through the blender. */
-#define RB3D_CONSTANT_COLOR_AR 0x4ef8
-# define RB3D_CONSTANT_COLOR_AR_RED_MASK 0x0000ffff
-# define RB3D_CONSTANT_COLOR_AR_RED_SHIFT 0
-# define RB3D_CONSTANT_COLOR_AR_ALPHA_MASK 0xffff0000
-# define RB3D_CONSTANT_COLOR_AR_ALPHA_SHIFT 16
+#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8
+# define R500_RB3D_CONSTANT_COLOR_AR_RED_MASK 0x0000ffff
+# define R500_RB3D_CONSTANT_COLOR_AR_RED_SHIFT 0
+# define R500_RB3D_CONSTANT_COLOR_AR_ALPHA_MASK 0xffff0000
+# define R500_RB3D_CONSTANT_COLOR_AR_ALPHA_SHIFT 16
/* Constant color used by the blender. Pipelined through the blender. */
-#define RB3D_CONSTANT_COLOR_GB 0x4efc
-# define RB3D_CONSTANT_COLOR_AR_BLUE_MASK 0x0000ffff
-# define RB3D_CONSTANT_COLOR_AR_BLUE_SHIFT 0
-# define RB3D_CONSTANT_COLOR_AR_GREEN_MASK 0xffff0000
-# define RB3D_CONSTANT_COLOR_AR_GREEN_SHIFT 16
+#define R500_RB3D_CONSTANT_COLOR_GB 0x4efc
+# define R500_RB3D_CONSTANT_COLOR_AR_BLUE_MASK 0x0000ffff
+# define R500_RB3D_CONSTANT_COLOR_AR_BLUE_SHIFT 0
+# define R500_RB3D_CONSTANT_COLOR_AR_GREEN_MASK 0xffff0000
+# define R500_RB3D_CONSTANT_COLOR_AR_GREEN_SHIFT 16
/* gap */
/* There seems to be no "write only" setting, so use Z-test = ALWAYS
* for this.
* Bit (1<<8) is the "test" bit. so plain write is 6 - vd
*/
-#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00
-# define R300_RB3D_Z_DISABLED_1 0x00000010
-# define R300_RB3D_Z_DISABLED_2 0x00000014
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-# define R300_RB3D_STENCIL_ENABLE 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1 0x4f04
+#define R300_ZB_CNTL 0x4F00
+# define R300_STENCIL_ENABLE (1 << 0)
+# define R300_Z_ENABLE (1 << 1)
+# define R300_Z_WRITE_ENABLE (1 << 2)
+# define R300_Z_SIGNED_COMPARE (1 << 3)
+# define R300_STENCIL_FRONT_BACK (1 << 4)
+
+#define R300_ZB_ZSTENCILCNTL 0x4f04
/* functions */
# define R300_ZS_NEVER 0
# define R300_ZS_LESS 1
# define R300_ZS_INVERT 5
# define R300_ZS_INCR_WRAP 6
# define R300_ZS_DECR_WRAP 7
+# define R300_Z_FUNC_SHIFT 0
/* front and back refer to operations done for front
and back faces, i.e. separate stencil function support */
-# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0
-# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3
-# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6
-# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9
-# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12
-# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15
-# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18
-# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21
-# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24
-
-#define ZB_STENCILREFMASK 0x4f08
-# define ZB_STENCILREFMASK_STENCILREF_SHIFT 0
-# define ZB_STENCILREFMASK_STENCIL_MASK 0xff
-# define ZB_STENCILREFMASK_STENCILREF_MASK 0x000000ff
-# define ZB_STENCILREFMASK_STENCILMASK_SHIFT 8
-# define ZB_STENCILREFMASK_STENCILMASK_MASK 0x0000ff00
-# define ZB_STENCILREFMASK_STENCILWRITEMASK_SHIFT 16
-# define ZB_STENCILREFMASK_STENCILWRITEMASK_MASK 0xffff0000
+# define R300_S_FRONT_FUNC_SHIFT 3
+# define R300_S_FRONT_SFAIL_OP_SHIFT 6
+# define R300_S_FRONT_ZPASS_OP_SHIFT 9
+# define R300_S_FRONT_ZFAIL_OP_SHIFT 12
+# define R300_S_BACK_FUNC_SHIFT 15
+# define R300_S_BACK_SFAIL_OP_SHIFT 18
+# define R300_S_BACK_ZPASS_OP_SHIFT 21
+# define R300_S_BACK_ZFAIL_OP_SHIFT 24
+
+#define R300_ZB_STENCILREFMASK 0x4f08
+# define R300_STENCILREF_SHIFT 0
+# define R300_STENCILREF_MASK 0x000000ff
+# define R300_STENCILMASK_SHIFT 8
+# define R300_STENCILMASK_MASK 0x0000ff00
+# define R300_STENCILWRITEMASK_SHIFT 16
+# define R300_STENCILWRITEMASK_MASK 0x00ff0000
/* gap */
-#define ZB_FORMAT 0x4f10
-# define ZB_FORMAR_DEPTHFORMAT_16BIT_INT_Z (0 << 0)
-# define ZB_FORMAR_DEPTHFORMAT_16BIT_13E3 (1 << 0)
-# define ZB_FORMAR_DEPTHFORMAT_24BIT_INT_Z (2 << 0)
+#define R300_ZB_FORMAT 0x4f10
+# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0)
+# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0)
+# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0)
/* reserved up to (15 << 0) */
-# define ZB_FORMAR_INVERT_13E3_LEADING_ONES (0 << 4)
-# define ZB_FORMAR_INVERT_13E3_LEADING_ZEROS (1 << 4)
-# define ZB_FORMAR_PEQ8_UNUSED (1 << 5)
+# define R300_INVERT_13E3_LEADING_ONES (0 << 4)
+# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
-#define R300_RB3D_EARLY_Z 0x4F14
-# define R300_EARLY_Z_DISABLE (0 << 0)
-# define R300_EARLY_Z_ENABLE (1 << 0)
+#define R300_ZB_ZTOP 0x4F14
+# define R300_ZTOP_DISABLE (0 << 0)
+# define R300_ZTOP_ENABLE (1 << 0)
/* gap */
-#define ZB_ZCACHE_CTLSTAT 0x4f18
-# define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0)
-# define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
-# define ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1)
-# define ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1)
-# define ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31)
-# define ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31)
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31)
#define R300_ZB_BW_CNTL 0x4f1c
# define R300_HIZ_DISABLE (0 << 0)
# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
-# define R300_ZEQUAL_OPTIMIZE_ENABLE (0 << 7)
-# define R300_ZEQUAL_OPTIMIZE_DISABLE (1 << 7)
-# define R300_SEQUAL_OPTIMIZE_ENABLE (0 << 8)
-# define R300_SEQUAL_OPTIMIZE_DISABLE (1 << 8)
-/* gap in AMD docs */
-# define R300_BMASK_ENABLE (0 << 10)
-# define R300_BMASK_DISABLE (1 << 10)
-# define R300_HIZ_EQUAL_REJECT_DISABLE (0 << 11)
-# define R300_HIZ_EQUAL_REJECT_ENABLE (1 << 11)
-# define R300_HIZ_FP_EXP_BITS_DISABLE (0 << 12)
-# define R300_HIZ_FP_EXP_BITS_1 (1 << 12)
-# define R300_HIZ_FP_EXP_BITS_2 (2 << 12)
-# define R300_HIZ_FP_EXP_BITS_3 (3 << 12)
-# define R300_HIZ_FP_EXP_BITS_4 (4 << 12)
-# define R300_HIZ_FP_EXP_BITS_5 (5 << 12)
-# define R300_HIZ_FP_INVERT_LEADING_ONES (0 << 15)
-# define R300_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15)
-# define R300_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16)
-# define R300_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16)
-# define R300_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17)
-# define R300_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17)
-# define R300_PEQ_PACKING_DISABLE (0 << 18)
-# define R300_PEQ_PACKING_ENABLE (1 << 18)
-# define R300_COVERED_PTR_MASKING_DISABLE (0 << 18)
-# define R300_COVERED_PTR_MASKING_ENABLE (1 << 18)
+
+# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7)
+# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7)
+# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8)
+# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8)
+
+# define R500_BMASK_ENABLE (0 << 10)
+# define R500_BMASK_DISABLE (1 << 10)
+# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11)
+# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11)
+# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12)
+# define R500_HIZ_FP_EXP_BITS_1 (1 << 12)
+# define R500_HIZ_FP_EXP_BITS_2 (2 << 12)
+# define R500_HIZ_FP_EXP_BITS_3 (3 << 12)
+# define R500_HIZ_FP_EXP_BITS_4 (4 << 12)
+# define R500_HIZ_FP_EXP_BITS_5 (5 << 12)
+# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15)
+# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17)
+# define R500_PEQ_PACKING_DISABLE (0 << 18)
+# define R500_PEQ_PACKING_ENABLE (1 << 18)
+# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18)
+# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18)
/* gap */
/* Z Buffer Address Offset.
* Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
*/
-#define ZB_DEPTHOFFSET 0x4f20
+#define R300_ZB_DEPTHOFFSET 0x4f20
/* Z Buffer Pitch and Endian Control */
-#define ZB_DEPTHPITCH 0x4f24
-# define R300_DEPTHPITCH_MASK 0x00001FF8 /* TODO: should be (13:2) */
-# define ZB_DEPTHPITCH_DEPTHMACROTILE_DISABLE (0 << 16)
-# define ZB_DEPTHPITCH_DEPTHMACROTILE_ENABLE (1 << 16)
-# define ZB_DEPTHPITCH_DEPTHMICROTILE_LINEAR (0 << 17)
-# define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED (1 << 17)
-# define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
-# define ZB_DEPTHPITCH_DEPTHENDIAN_NO_SWAP (0 << 18)
-# define ZB_DEPTHPITCH_DEPTHENDIAN_WORD_SWAP (1 << 18)
-# define ZB_DEPTHPITCH_DEPTHENDIAN_DWORD_SWAP (2 << 18)
-# define ZB_DEPTHPITCH_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+#define R300_ZB_DEPTHPITCH 0x4f24
+# define R300_DEPTHPITCH_MASK 0x00003FFC
+# define R300_DEPTHMACROTILE_DISABLE (0 << 16)
+# define R300_DEPTHMACROTILE_ENABLE (1 << 16)
+# define R300_DEPTHMICROTILE_LINEAR (0 << 17)
+# define R300_DEPTHMICROTILE_TILED (1 << 17)
+# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
+# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
+# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
+# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
/* Z Buffer Clear Value */
-#define ZB_DEPTHCLEARVALUE 0x4f28
+#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+#define R300_ZB_ZMASK_PITCH 0x4f34
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
/* Hierarchical Z Memory Offset */
-#define ZB_HIZ_OFFSET 0x4f44
+#define R300_ZB_HIZ_OFFSET 0x4f44
-/* Hierarchical Z Read Index */
-#define ZB_HIZ_RDINDEX 0x4f48
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX 0x4f48
/* Hierarchical Z Data */
-#define ZB_HIZ_DWORD 0x4f4c
+#define R300_ZB_HIZ_DWORD 0x4f4c
-/* Hierarchical Z Write Index */
-#define ZB_HIZ_WRINDEX 0x4f50
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX 0x4f50
/* Hierarchical Z Pitch */
-#define ZB_HIZ_PITCH 0x4f54
+#define R300_ZB_HIZ_PITCH 0x4f54
/* Z Buffer Z Pass Counter Data */
-#define ZB_ZPASS_DATA 0x4f58
+#define R300_ZB_ZPASS_DATA 0x4f58
/* Z Buffer Z Pass Counter Address */
-#define ZB_ZPASS_ADDR 0x4f5c
+#define R300_ZB_ZPASS_ADDR 0x4f5c
/* Depth buffer X and Y coordinate offset */
-#define ZB_DEPTHXY_OFFSET 0x4f60
-# define ZB_DEPTHX_OFFSET_SHIFT 1
-# define ZB_DEPTHX_OFFSET_MASK 0x000007FE
-# define ZB_DEPTHY_OFFSET_SHIFT 17
-# define ZB_DEPTHY_OFFSET_MASK 0x07FE0000
+#define R300_ZB_DEPTHXY_OFFSET 0x4f60
+# define R300_DEPTHX_OFFSET_SHIFT 1
+# define R300_DEPTHX_OFFSET_MASK 0x000007FE
+# define R300_DEPTHY_OFFSET_SHIFT 17
+# define R300_DEPTHY_OFFSET_MASK 0x07FE0000
/* Sets the fifo sizes */
-#define ZB_FIFO_SIZE 0x4fd0
-# define ZB_FIFO_SIZE_OP_FIFO_SIZE_FULL (0 << 0)
-# define ZB_FIFO_SIZE_OP_FIFO_SIZE_HALF (1 << 0)
-# define ZB_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0)
-# define ZB_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (4 << 0)
+#define R500_ZB_FIFO_SIZE 0x4fd0
+# define R500_OP_FIFO_SIZE_FULL (0 << 0)
+# define R500_OP_FIFO_SIZE_HALF (1 << 0)
+# define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
/* Stencil Reference Value and Mask for backfacing quads */
-#define ZB_STENCILREFMASK_BF 0x4fd4
-# define ZB_STENCILREFMASK_BF_STENCILREF_SHIFT 0
-# define ZB_STENCILREFMASK_BF_STENCILREF_MASK 0x000000ff
-# define ZB_STENCILREFMASK_BF_STENCILMASK_SHIFT 8
-# define ZB_STENCILREFMASK_BF_STENCILMASK_MASK 0x0000ff00
-# define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_SHIFT 16
-# define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_MASK 0xffff0000
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF 0x4fd4
+# define R500_STENCILREF_SHIFT 0
+# define R500_STENCILREF_MASK 0x000000ff
+# define R500_STENCILMASK_SHIFT 8
+# define R500_STENCILMASK_MASK 0x0000ff00
+# define R500_STENCILWRITEMASK_SHIFT 16
+# define R500_STENCILWRITEMASK_MASK 0x00ff0000
/**
* \defgroup R3XX_R5XX_PROGRAMMABLE_VERTEX_SHADER_DESCRIPTION R3XX-R5XX PROGRAMMABLE VERTEX SHADER DESCRIPTION
# define R500_ALPHA_OP_COS 13
# define R500_ALPHA_OP_MDH 14
# define R500_ALPHA_OP_MDV 15
-# define R500_ALPHA_ADDRD(x) (x << 4)
+# define R500_ALPHA_ADDRD(x) ((x) << 4)
# define R500_ALPHA_ADDRD_REL (1 << 11)
+# define R500_ALPHA_SEL_A_SHIFT 12
# define R500_ALPHA_SEL_A_SRC0 (0 << 12)
# define R500_ALPHA_SEL_A_SRC1 (1 << 12)
# define R500_ALPHA_SEL_A_SRC2 (2 << 12)
# define R500_ALPHA_MOD_A_NEG (1 << 17)
# define R500_ALPHA_MOD_A_ABS (2 << 17)
# define R500_ALPHA_MOD_A_NAB (3 << 17)
+# define R500_ALPHA_SEL_B_SHIFT 19
# define R500_ALPHA_SEL_B_SRC0 (0 << 19)
# define R500_ALPHA_SEL_B_SRC1 (1 << 19)
# define R500_ALPHA_SEL_B_SRC2 (2 << 19)
# define R500_ALPHA_OMOD_DIV_4 (5 << 26)
# define R500_ALPHA_OMOD_DIV_8 (6 << 26)
# define R500_ALPHA_OMOD_DISABLE (7 << 26)
-# define R500_ALPHA_TARGET(x) (x << 29)
+# define R500_ALPHA_TARGET(x) ((x) << 29)
# define R500_ALPHA_W_OMASK (1 << 31)
#define R500_US_ALU_ALPHA_ADDR_0 0x9800
-# define R500_ALPHA_ADDR0(x) (x << 0)
+# define R500_ALPHA_ADDR0(x) ((x) << 0)
# define R500_ALPHA_ADDR0_CONST (1 << 8)
# define R500_ALPHA_ADDR0_REL (1 << 9)
-# define R500_ALPHA_ADDR1(x) (x << 10)
+# define R500_ALPHA_ADDR1(x) ((x) << 10)
# define R500_ALPHA_ADDR1_CONST (1 << 18)
# define R500_ALPHA_ADDR1_REL (1 << 19)
-# define R500_ALPHA_ADDR2(x) (x << 20)
+# define R500_ALPHA_ADDR2(x) ((x) << 20)
# define R500_ALPHA_ADDR2_CONST (1 << 28)
# define R500_ALPHA_ADDR2_REL (1 << 29)
# define R500_ALPHA_SRCP_OP_1_MINUS_2A0 (0 << 30)
# define R500_ALU_RGBA_OP_SOP (10 << 0)
# define R500_ALU_RGBA_OP_MDH (11 << 0)
# define R500_ALU_RGBA_OP_MDV (12 << 0)
-# define R500_ALU_RGBA_ADDRD(x) (x << 4)
+# define R500_ALU_RGBA_ADDRD(x) ((x) << 4)
# define R500_ALU_RGBA_ADDRD_REL (1 << 11)
+# define R500_ALU_RGBA_SEL_C_SHIFT 12
# define R500_ALU_RGBA_SEL_C_SRC0 (0 << 12)
# define R500_ALU_RGBA_SEL_C_SRC1 (1 << 12)
# define R500_ALU_RGBA_SEL_C_SRC2 (2 << 12)
# define R500_ALU_RGBA_MOD_C_NEG (1 << 23)
# define R500_ALU_RGBA_MOD_C_ABS (2 << 23)
# define R500_ALU_RGBA_MOD_C_NAB (3 << 23)
+# define R500_ALU_RGBA_ALPHA_SEL_C_SHIFT 25
# define R500_ALU_RGBA_ALPHA_SEL_C_SRC0 (0 << 25)
# define R500_ALU_RGBA_ALPHA_SEL_C_SRC1 (1 << 25)
# define R500_ALU_RGBA_ALPHA_SEL_C_SRC2 (2 << 25)
# define R500_ALU_RGBA_ALPHA_MOD_C_ABS (2 << 30)
# define R500_ALU_RGBA_ALPHA_MOD_C_NAB (3 << 30)
#define R500_US_ALU_RGB_INST_0 0xa000
+# define R500_ALU_RGB_SEL_A_SHIFT 0
# define R500_ALU_RGB_SEL_A_SRC0 (0 << 0)
# define R500_ALU_RGB_SEL_A_SRC1 (1 << 0)
# define R500_ALU_RGB_SEL_A_SRC2 (2 << 0)
# define R500_ALU_RGB_MOD_A_NEG (1 << 11)
# define R500_ALU_RGB_MOD_A_ABS (2 << 11)
# define R500_ALU_RGB_MOD_A_NAB (3 << 11)
+# define R500_ALU_RGB_SEL_B_SHIFT 13
# define R500_ALU_RGB_SEL_B_SRC0 (0 << 13)
# define R500_ALU_RGB_SEL_B_SRC1 (1 << 13)
# define R500_ALU_RGB_SEL_B_SRC2 (2 << 13)
# define R500_ALU_RGB_OMOD_DIV_4 (5 << 26)
# define R500_ALU_RGB_OMOD_DIV_8 (6 << 26)
# define R500_ALU_RGB_OMOD_DISABLE (7 << 26)
-# define R500_ALU_RGB_TARGET(x) (x << 29)
+# define R500_ALU_RGB_TARGET(x) ((x) << 29)
# define R500_ALU_RGB_WMASK (1 << 31)
#define R500_US_ALU_RGB_ADDR_0 0x9000
-# define R500_RGB_ADDR0(x) (x << 0)
+# define R500_RGB_ADDR0(x) ((x) << 0)
# define R500_RGB_ADDR0_CONST (1 << 8)
# define R500_RGB_ADDR0_REL (1 << 9)
-# define R500_RGB_ADDR1(x) (x << 10)
+# define R500_RGB_ADDR1(x) ((x) << 10)
# define R500_RGB_ADDR1_CONST (1 << 18)
# define R500_RGB_ADDR1_REL (1 << 19)
-# define R500_RGB_ADDR2(x) (x << 20)
+# define R500_RGB_ADDR2(x) ((x) << 20)
# define R500_RGB_ADDR2_CONST (1 << 28)
# define R500_RGB_ADDR2_REL (1 << 29)
# define R500_RGB_SRCP_OP_1_MINUS_2RGB0 (0 << 30)
# define R500_RGB_SRCP_OP_RGB1_PLUS_RGB0 (2 << 30)
# define R500_RGB_SRCP_OP_1_MINUS_RGB0 (3 << 30)
#define R500_US_CMN_INST_0 0xb800
+# define R500_INST_TYPE_MASK (3 << 0)
# define R500_INST_TYPE_ALU (0 << 0)
# define R500_INST_TYPE_OUT (1 << 0)
# define R500_INST_TYPE_FC (2 << 0)
/* note that these are 8 bit lengths, despite the offsets, at least for R500 */
#define R500_US_CODE_ADDR 0x4630
-# define R500_US_CODE_START_ADDR(x) (x << 0)
-# define R500_US_CODE_END_ADDR(x) (x << 16)
+# define R500_US_CODE_START_ADDR(x) ((x) << 0)
+# define R500_US_CODE_END_ADDR(x) ((x) << 16)
#define R500_US_CODE_OFFSET 0x4638
-# define R500_US_CODE_OFFSET_ADDR(x) (x << 0)
+# define R500_US_CODE_OFFSET_ADDR(x) ((x) << 0)
#define R500_US_CODE_RANGE 0x4634
-# define R500_US_CODE_RANGE_ADDR(x) (x << 0)
-# define R500_US_CODE_RANGE_SIZE(x) (x << 16)
+# define R500_US_CODE_RANGE_ADDR(x) ((x) << 0)
+# define R500_US_CODE_RANGE_SIZE(x) ((x) << 16)
#define R500_US_CONFIG 0x4600
# define R500_ZERO_TIMES_ANYTHING_EQUALS_ZERO (1 << 1)
#define R500_US_FC_ADDR_0 0xa000
-# define R500_FC_BOOL_ADDR(x) (x << 0)
-# define R500_FC_INT_ADDR(x) (x << 8)
-# define R500_FC_JUMP_ADDR(x) (x << 16)
+# define R500_FC_BOOL_ADDR(x) ((x) << 0)
+# define R500_FC_INT_ADDR(x) ((x) << 8)
+# define R500_FC_JUMP_ADDR(x) ((x) << 16)
# define R500_FC_JUMP_GLOBAL (1 << 31)
#define R500_US_FC_BOOL_CONST 0x4620
# define R500_FC_KBOOL(x) (x)
# define R500_FC_A_OP_NONE (0 << 6)
# define R500_FC_A_OP_POP (1 << 6)
# define R500_FC_A_OP_PUSH (2 << 6)
-# define R500_FC_JUMP_FUNC(x) (x << 8)
-# define R500_FC_B_POP_CNT(x) (x << 16)
+# define R500_FC_JUMP_FUNC(x) ((x) << 8)
+# define R500_FC_B_POP_CNT(x) ((x) << 16)
# define R500_FC_B_OP0_NONE (0 << 24)
# define R500_FC_B_OP0_DECR (1 << 24)
# define R500_FC_B_OP0_INCR (2 << 24)
# define R500_FC_B_OP1_INCR (2 << 26)
# define R500_FC_IGNORE_UNCOVERED (1 << 28)
#define R500_US_FC_INT_CONST_0 0x4c00
-# define R500_FC_INT_CONST_KR(x) (x << 0)
-# define R500_FC_INT_CONST_KG(x) (x << 8)
-# define R500_FC_INT_CONST_KB(x) (x << 16)
+# define R500_FC_INT_CONST_KR(x) ((x) << 0)
+# define R500_FC_INT_CONST_KG(x) ((x) << 8)
+# define R500_FC_INT_CONST_KB(x) ((x) << 16)
/* _0 through _15 */
#define R500_US_FORMAT0_0 0x4640
-# define R500_FORMAT_TXWIDTH(x) (x << 0)
-# define R500_FORMAT_TXHEIGHT(x) (x << 11)
-# define R500_FORMAT_TXDEPTH(x) (x << 22)
+# define R500_FORMAT_TXWIDTH(x) ((x) << 0)
+# define R500_FORMAT_TXHEIGHT(x) ((x) << 11)
+# define R500_FORMAT_TXDEPTH(x) ((x) << 22)
/* _0 through _3 */
#define R500_US_OUT_FMT_0 0x46a4
# define R500_OUT_FMT_C4_8 (0 << 0)
# define R500_C3_SEL_R (1 << 14)
# define R500_C3_SEL_G (2 << 14)
# define R500_C3_SEL_B (3 << 14)
-# define R500_OUT_SIGN(x) (x << 16)
+# define R500_OUT_SIGN(x) ((x) << 16)
# define R500_ROUND_ADJ (1 << 20)
#define R500_US_PIXSIZE 0x4604
# define R500_PIX_SIZE(x) (x)
#define R500_US_TEX_ADDR_0 0x9800
-# define R500_TEX_SRC_ADDR(x) (x << 0)
+# define R500_TEX_SRC_ADDR(x) ((x) << 0)
# define R500_TEX_SRC_ADDR_REL (1 << 7)
# define R500_TEX_SRC_S_SWIZ_R (0 << 8)
# define R500_TEX_SRC_S_SWIZ_G (1 << 8)
# define R500_TEX_SRC_Q_SWIZ_G (1 << 14)
# define R500_TEX_SRC_Q_SWIZ_B (2 << 14)
# define R500_TEX_SRC_Q_SWIZ_A (3 << 14)
-# define R500_TEX_DST_ADDR(x) (x << 16)
+# define R500_TEX_DST_ADDR(x) ((x) << 16)
# define R500_TEX_DST_ADDR_REL (1 << 23)
# define R500_TEX_DST_R_SWIZ_R (0 << 24)
# define R500_TEX_DST_R_SWIZ_G (1 << 24)
# define R500_TEX_DST_A_SWIZ_B (2 << 30)
# define R500_TEX_DST_A_SWIZ_A (3 << 30)
#define R500_US_TEX_ADDR_DXDY_0 0xa000
-# define R500_DX_ADDR(x) (x << 0)
+# define R500_DX_ADDR(x) ((x) << 0)
# define R500_DX_ADDR_REL (1 << 7)
# define R500_DX_S_SWIZ_R (0 << 8)
# define R500_DX_S_SWIZ_G (1 << 8)
# define R500_DX_Q_SWIZ_G (1 << 14)
# define R500_DX_Q_SWIZ_B (2 << 14)
# define R500_DX_Q_SWIZ_A (3 << 14)
-# define R500_DY_ADDR(x) (x << 16)
+# define R500_DY_ADDR(x) ((x) << 16)
# define R500_DY_ADDR_REL (1 << 17)
# define R500_DY_S_SWIZ_R (0 << 24)
# define R500_DY_S_SWIZ_G (1 << 24)
# define R500_DY_Q_SWIZ_B (2 << 30)
# define R500_DY_Q_SWIZ_A (3 << 30)
#define R500_US_TEX_INST_0 0x9000
-# define R500_TEX_ID(x) (x << 16)
+# define R500_TEX_ID(x) ((x) << 16)
# define R500_TEX_INST_NOP (0 << 22)
# define R500_TEX_INST_LD (1 << 22)
# define R500_TEX_INST_TEXKILL (2 << 22)
# define R500_TEX_SEM_ACQUIRE (1 << 25)
# define R500_TEX_IGNORE_UNCOVERED (1 << 26)
# define R500_TEX_UNSCALED (1 << 27)
-#define R500_US_W_FMT 0x46b4
-# define R500_W_FMT_W0 (0 << 0)
-# define R500_W_FMT_W24 (1 << 0)
-# define R500_W_FMT_W24FP (2 << 0)
-# define R500_W_SRC_US (0 << 2)
-# define R500_W_SRC_RAS (1 << 2)
+#define R300_US_W_FMT 0x46b4
+# define R300_W_FMT_W0 (0 << 0)
+# define R300_W_FMT_W24 (1 << 0)
+# define R300_W_FMT_W24FP (2 << 0)
+# define R300_W_SRC_US (0 << 2)
+# define R300_W_SRC_RAS (1 << 2)
+
+/* Packet0 field ordering to write all values to the same reg */
+#define RADEON_ONE_REG_WR (1 << 15)
/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
* Two parameter dwords:
* 2 to end: Up to 16380 dwords of vertex data.
*/
#define R300_PACKET3_3D_DRAW_INDX 0x00002A00
-
+
/* Specify the full set of vertex arrays as (address, stride).
* The first parameter is the number of vertex arrays specified.
#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00
#define R300_PACKET3_INDX_BUFFER 0x00003300
-# define R300_EB_UNK1_SHIFT 24
-# define R300_EB_UNK1 (0x80<<24)
-# define R300_EB_UNK2 0x0810
+# define R300_INDX_BUFFER_DST_SHIFT 0
+# define R300_INDX_BUFFER_SKIP_SHIFT 16
+# define R300_INDX_BUFFER_ONE_REG_WR (1<<31)
/* Same as R300_PACKET3_3D_DRAW_VBUF but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_VBUF_2 0x00003400
/* Same as R300_PACKET3_3D_DRAW_INDX but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_INDX_2 0x00003600
-/* Clears a portion of hierachical Z RAM
+/* Clears a portion of hierachical Z RAM
* 3 dword parameters
* 0. START
* 1. COUNT: 13:0 (max is 0x3FFF)
projects / mesa.git / blobdiff