/*
* Mesa 3-D graphics library
- * Version: 7.1
*
* Copyright (C) 1999-2007 Brian Paul All Rights Reserved.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
- * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
if (_mesa_is_user_fbo(fb)) {
/* A user-created renderbuffer */
GLuint i;
- ASSERT(ctx->Extensions.EXT_framebuffer_object);
for (i = 0; i < ctx->Const.MaxColorAttachments; i++) {
mask |= (BUFFER_BIT_COLOR0 << i);
}
* GL_FRONT_AND_BACK), return the corresponding bitmask of BUFFER_BIT_* flags.
*/
static GLbitfield
-draw_buffer_enum_to_bitmask(GLenum buffer)
+draw_buffer_enum_to_bitmask(const struct gl_context *ctx, GLenum buffer)
{
switch (buffer) {
case GL_NONE:
case GL_FRONT:
return BUFFER_BIT_FRONT_LEFT | BUFFER_BIT_FRONT_RIGHT;
case GL_BACK:
+ if (_mesa_is_gles3(ctx)) {
+ /* Page 181 (page 192 of the PDF) in section 4.2.1 of the OpenGL
+ * ES 3.0.1 specification says:
+ *
+ * "When draw buffer zero is BACK, color values are written
+ * into the sole buffer for single-buffered contexts, or into
+ * the back buffer for double-buffered contexts."
+ *
+ * Since there is no stereo rendering in ES 3.0, only return the
+ * LEFT bits. This also satisfies the "n must be 1" requirement.
+ */
+ if (ctx->DrawBuffer->Visual.doubleBufferMode)
+ return BUFFER_BIT_BACK_LEFT;
+ return BUFFER_BIT_FRONT_LEFT;
+ }
return BUFFER_BIT_BACK_LEFT | BUFFER_BIT_BACK_RIGHT;
case GL_RIGHT:
return BUFFER_BIT_FRONT_RIGHT | BUFFER_BIT_BACK_RIGHT;
* Called by glDrawBuffer().
* Specify which renderbuffer(s) to draw into for the first color output.
* <buffer> can name zero, one, two or four renderbuffers!
- * \sa _mesa_DrawBuffersARB
+ * \sa _mesa_DrawBuffers
*
* \param buffer buffer token such as GL_LEFT or GL_FRONT_AND_BACK, etc.
*
* Note that the behaviour of this function depends on whether the
- * current ctx->DrawBuffer is a window-system framebuffer (Name=0) or
- * a user-created framebuffer object (Name!=0).
+ * current ctx->DrawBuffer is a window-system framebuffer or a user-created
+ * framebuffer object.
* In the former case, we update the per-context ctx->Color.DrawBuffer
* state var _and_ the FB's ColorDrawBuffer state.
* In the later case, we update the FB's ColorDrawBuffer state only.
{
GLbitfield destMask;
GET_CURRENT_CONTEXT(ctx);
- ASSERT_OUTSIDE_BEGIN_END_AND_FLUSH(ctx); /* too complex... */
+
+ FLUSH_VERTICES(ctx, 0);
if (MESA_VERBOSE & VERBOSE_API) {
_mesa_debug(ctx, "glDrawBuffer %s\n", _mesa_lookup_enum_by_nr(buffer));
else {
const GLbitfield supportedMask
= supported_buffer_bitmask(ctx, ctx->DrawBuffer);
- destMask = draw_buffer_enum_to_bitmask(buffer);
+ destMask = draw_buffer_enum_to_bitmask(ctx, buffer);
if (destMask == BAD_MASK) {
/* totally bogus buffer */
_mesa_error(ctx, GL_INVALID_ENUM,
* GL_FRONT_AND_BACK is illegal.
*/
void GLAPIENTRY
-_mesa_DrawBuffersARB(GLsizei n, const GLenum *buffers)
+_mesa_DrawBuffers(GLsizei n, const GLenum *buffers)
{
GLint output;
GLbitfield usedBufferMask, supportedMask;
GLbitfield destMask[MAX_DRAW_BUFFERS];
GET_CURRENT_CONTEXT(ctx);
- ASSERT_OUTSIDE_BEGIN_END_AND_FLUSH(ctx);
+
+ FLUSH_VERTICES(ctx, 0);
/* Turns out n==0 is a valid input that should not produce an error.
* The remaining code below correctly handles the n==0 case.
+ *
+ * From the OpenGL 3.0 specification, page 258:
+ * "An INVALID_VALUE error is generated if n is greater than
+ * MAX_DRAW_BUFFERS."
*/
if (n < 0 || n > (GLsizei) ctx->Const.MaxDrawBuffers) {
_mesa_error(ctx, GL_INVALID_VALUE, "glDrawBuffersARB(n)");
supportedMask = supported_buffer_bitmask(ctx, ctx->DrawBuffer);
usedBufferMask = 0x0;
+ /* From the ES 3.0 specification, page 180:
+ * "If the GL is bound to the default framebuffer, then n must be 1
+ * and the constant must be BACK or NONE."
+ */
+ if (_mesa_is_gles3(ctx) && _mesa_is_winsys_fbo(ctx->DrawBuffer) &&
+ (n != 1 || (buffers[0] != GL_NONE && buffers[0] != GL_BACK))) {
+ _mesa_error(ctx, GL_INVALID_OPERATION, "glDrawBuffers(buffer)");
+ return;
+ }
+
/* complicated error checking... */
for (output = 0; output < n; output++) {
if (buffers[output] == GL_NONE) {
destMask[output] = 0x0;
}
else {
- destMask[output] = draw_buffer_enum_to_bitmask(buffers[output]);
- if (destMask[output] == BAD_MASK
- || _mesa_bitcount(destMask[output]) > 1) {
+ /* Page 259 (page 275 of the PDF) in section 4.2.1 of the OpenGL 3.0
+ * spec (20080923) says:
+ *
+ * "If the GL is bound to a framebuffer object and DrawBuffers is
+ * supplied with [...] COLOR_ATTACHMENTm where m is greater than
+ * or equal to the value of MAX_COLOR_ATTACHMENTS, then the error
+ * INVALID_OPERATION results."
+ */
+ if (_mesa_is_user_fbo(ctx->DrawBuffer) && buffers[output] >=
+ GL_COLOR_ATTACHMENT0 + ctx->Const.MaxDrawBuffers) {
+ _mesa_error(ctx, GL_INVALID_OPERATION, "glDrawBuffersARB(buffer)");
+ return;
+ }
+
+ destMask[output] = draw_buffer_enum_to_bitmask(ctx, buffers[output]);
+
+ /* From the OpenGL 3.0 specification, page 258:
+ * "Each buffer listed in bufs must be one of the values from tables
+ * 4.5 or 4.6. Otherwise, an INVALID_ENUM error is generated.
+ */
+ if (destMask[output] == BAD_MASK) {
_mesa_error(ctx, GL_INVALID_ENUM, "glDrawBuffersARB(buffer)");
return;
}
+
+ /* From the OpenGL 3.0 specification, page 259:
+ * "For both the default framebuffer and framebuffer objects, the
+ * constants FRONT, BACK, LEFT, RIGHT, and FRONT_AND_BACK are not
+ * valid in the bufs array passed to DrawBuffers, and will result in
+ * the error INVALID_OPERATION. This restriction is because these
+ * constants may themselves refer to multiple buffers, as shown in
+ * table 4.4."
+ */
+ if (_mesa_bitcount(destMask[output]) > 1) {
+ _mesa_error(ctx, GL_INVALID_OPERATION, "glDrawBuffersARB(buffer)");
+ return;
+ }
+
+ /* From the OpenGL 3.0 specification, page 259:
+ * "If the GL is bound to the default framebuffer and DrawBuffers is
+ * supplied with a constant (other than NONE) that does not indicate
+ * any of the color buffers allocated to the GL context by the window
+ * system, the error INVALID_OPERATION will be generated.
+ *
+ * If the GL is bound to a framebuffer object and DrawBuffers is
+ * supplied with a constant from table 4.6 [...] then the error
+ * INVALID_OPERATION results."
+ */
destMask[output] &= supportedMask;
if (destMask[output] == 0) {
_mesa_error(ctx, GL_INVALID_OPERATION,
"glDrawBuffersARB(unsupported buffer)");
return;
}
+
+ /* ES 3.0 is even more restrictive. From the ES 3.0 spec, page 180:
+ * "If the GL is bound to a framebuffer object, the ith buffer listed
+ * in bufs must be COLOR_ATTACHMENTi or NONE. [...] INVALID_OPERATION."
+ */
+ if (_mesa_is_gles3(ctx) && _mesa_is_user_fbo(ctx->DrawBuffer) &&
+ buffers[output] != GL_NONE &&
+ buffers[output] != GL_COLOR_ATTACHMENT0 + output) {
+ _mesa_error(ctx, GL_INVALID_OPERATION, "glDrawBuffers(buffer)");
+ return;
+ }
+
+ /* From the OpenGL 3.0 specification, page 258:
+ * "Except for NONE, a buffer may not appear more than once in the
+ * array pointed to by bufs. Specifying a buffer more then once will
+ * result in the error INVALID_OPERATION."
+ */
if (destMask[output] & usedBufferMask) {
- /* can't specify a dest buffer more than once! */
_mesa_error(ctx, GL_INVALID_OPERATION,
"glDrawBuffersARB(duplicated buffer)");
return;
{
FLUSH_VERTICES(ctx, _NEW_BUFFERS);
-#if FEATURE_GL
- if (ctx->API == API_OPENGL && !ctx->Extensions.ARB_ES2_compatibility) {
+ if (ctx->API == API_OPENGL_COMPAT && !ctx->Extensions.ARB_ES2_compatibility) {
struct gl_framebuffer *fb = ctx->DrawBuffer;
/* Flag the FBO as requiring validation. */
fb->_Status = 0;
}
}
-#endif
}
const GLbitfield supportedMask = supported_buffer_bitmask(ctx, fb);
GLuint output;
for (output = 0; output < n; output++) {
- mask[output] = draw_buffer_enum_to_bitmask(buffers[output]);
+ mask[output] = draw_buffer_enum_to_bitmask(ctx, buffers[output]);
ASSERT(mask[output] != BAD_MASK);
mask[output] &= supportedMask;
}
GLbitfield supportedMask;
GLint srcBuffer;
GET_CURRENT_CONTEXT(ctx);
- ASSERT_OUTSIDE_BEGIN_END_AND_FLUSH(ctx);
+
+ FLUSH_VERTICES(ctx, 0);
if (MESA_VERBOSE & VERBOSE_API)
_mesa_debug(ctx, "glReadBuffer %s\n", _mesa_lookup_enum_by_nr(buffer));
if (MESA_VERBOSE & VERBOSE_API)
_mesa_debug(ctx, "glReadBuffer %s\n", _mesa_lookup_enum_by_nr(buffer));
- if (_mesa_is_user_fbo(fb) && buffer == GL_NONE) {
- /* This is legal for user-created framebuffer objects */
+ if (buffer == GL_NONE) {
+ /* This is legal--it means that no buffer should be bound for reading. */
srcBuffer = -1;
}
else {
/* OK, all error checking has been completed now */
_mesa_readbuffer(ctx, buffer, srcBuffer);
- ctx->NewState |= _NEW_BUFFERS;
/*
* Call device driver function.