/*
* Mesa 3-D graphics library
- * Version: 6.5.2
+ * Version: 6.5.3
*
- * Copyright (C) 1999-2006 Brian Paul All Rights Reserved.
+ * Copyright (C) 1999-2007 Brian Paul All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
#ifndef S_CONTEXT_H
#define S_CONTEXT_H
-#include "mtypes.h"
+#include "main/mtypes.h"
+#include "shader/prog_execute.h"
#include "swrast.h"
-
-
-/**
- * \defgroup SpanFlags SPAN_XXX-flags
- * Bitmasks to indicate which sw_span_arrays need to be computed
- * (sw_span::interpMask) or have already been filled in (sw_span::arrayMask)
- */
-/*@{*/
-#define SPAN_RGBA 0x001
-#define SPAN_SPEC 0x002
-#define SPAN_INDEX 0x004
-#define SPAN_Z 0x008
-#define SPAN_W 0x010
-#define SPAN_FOG 0x020
-#define SPAN_TEXTURE 0x040
-#define SPAN_INT_TEXTURE 0x080
-#define SPAN_LAMBDA 0x100
-#define SPAN_COVERAGE 0x200
-#define SPAN_FLAT 0x400 /**< flat shading? */
-#define SPAN_XY 0x800
-#define SPAN_MASK 0x1000
-#define SPAN_VARYING 0x2000
-/*@}*/
-
-#if 0
-/* alternate arrangement for code below */
-struct arrays2 {
- union {
- GLubyte sz1[MAX_WIDTH][4]; /* primary color */
- GLushort sz2[MAX_WIDTH][4];
- GLfloat sz4[MAX_WIDTH][4];
- } rgba;
- union {
- GLubyte sz1[MAX_WIDTH][4]; /* specular color and temp storage */
- GLushort sz2[MAX_WIDTH][4];
- GLfloat sz4[MAX_WIDTH][4];
- } spec;
-};
-#endif
-
-
-
-/**
- * \sw_span_arrays
- * \brief Arrays of fragment values.
- *
- * These will either be computed from the span x/xStep values or
- * filled in by glDraw/CopyPixels, etc.
- * These arrays are separated out of sw_span to conserve memory.
- */
-typedef struct sw_span_arrays {
- GLenum ChanType; /**< Color channel type, GL_UNSIGNED_BYTE, GL_FLOAT */
- union {
- struct {
- GLubyte rgba[MAX_WIDTH][4]; /**< primary color */
- GLubyte spec[MAX_WIDTH][4]; /**< specular color and temp storage */
- } sz1;
- struct {
- GLushort rgba[MAX_WIDTH][4];
- GLushort spec[MAX_WIDTH][4];
- } sz2;
- struct {
- GLfloat rgba[MAX_WIDTH][4];
- GLfloat spec[MAX_WIDTH][4];
- } sz4;
- } color;
- /** XXX these are temporary fields, pointing into above color arrays */
- GLchan (*rgba)[4];
- GLchan (*spec)[4];
-
-#if 0
- /* XXX rearrange and unify these arrays to so that we can
- * index all fragment inputs with the FRAG_ATTRIB_* values:
- */
- GLfloat attribs[FRAG_ATTRIB_MAX][MAX_WIDTH][4];
- /*OR*/
- typedef GLfloat (*array4f)[4];
- array4f attribs[FRAG_ATTRIB_MAX];
-#endif
-
- GLint x[MAX_WIDTH]; /**< fragment X coords */
- GLint y[MAX_WIDTH]; /**< fragment Y coords */
- GLuint z[MAX_WIDTH]; /**< fragment Z coords */
- GLuint index[MAX_WIDTH]; /**< Color indexes */
- GLfloat fog[MAX_WIDTH];
- GLfloat texcoords[MAX_TEXTURE_COORD_UNITS][MAX_WIDTH][4];
- GLfloat lambda[MAX_TEXTURE_COORD_UNITS][MAX_WIDTH];
- GLfloat coverage[MAX_WIDTH]; /**< Fragment coverage for AA/smoothing */
- GLfloat varying[MAX_VARYING][MAX_WIDTH][4]; /**< For shaders */
-
- /** This mask indicates which fragments are alive or culled */
- GLubyte mask[MAX_WIDTH];
-} SWspanarrays;
-
-
-/**
- * The SWspan structure describes the colors, Z, fogcoord, texcoords,
- * etc for either a horizontal run or an array of independent pixels.
- * We can either specify a base/step to indicate interpolated values, or
- * fill in explicit arrays of values. The interpMask and arrayMask bitfields
- * indicate which attributes are active interpolants or arrays, respectively.
- *
- * It would be interesting to experiment with multiprocessor rasterization
- * with this structure. The triangle rasterizer could simply emit a
- * stream of these structures which would be consumed by one or more
- * span-processing threads which could run in parallel.
- */
-typedef struct sw_span {
- GLint x, y;
-
- /** Only need to process pixels between start <= i < end */
- /** At this time, start is always zero. */
- GLuint start, end;
-
- /** This flag indicates that mask[] array is effectively filled with ones */
- GLboolean writeAll;
-
- /** either GL_POLYGON, GL_LINE, GL_POLYGON, GL_BITMAP */
- GLenum primitive;
-
- /** 0 = front-facing span, 1 = back-facing span (for two-sided stencil) */
- GLuint facing;
-
- /**
- * This bitmask (of \link SpanFlags SPAN_* flags\endlink) indicates
- * which of the x/xStep variables are relevant.
- */
- GLbitfield interpMask;
-
- /* For horizontal spans, step is the partial derivative wrt X.
- * For lines, step is the delta from one fragment to the next.
- */
-#if CHAN_TYPE == GL_FLOAT
- GLfloat red, redStep;
- GLfloat green, greenStep;
- GLfloat blue, blueStep;
- GLfloat alpha, alphaStep;
- GLfloat specRed, specRedStep;
- GLfloat specGreen, specGreenStep;
- GLfloat specBlue, specBlueStep;
-#else /* CHAN_TYPE == GL_UNSIGNED_BYTE or GL_UNSIGNED_SHORT */
- GLfixed red, redStep;
- GLfixed green, greenStep;
- GLfixed blue, blueStep;
- GLfixed alpha, alphaStep;
- GLfixed specRed, specRedStep;
- GLfixed specGreen, specGreenStep;
- GLfixed specBlue, specBlueStep;
-#endif
- GLfixed index, indexStep;
- GLfixed z, zStep; /* XXX z should probably be GLuint */
- GLfloat fog, fogStep;
- GLfloat tex[MAX_TEXTURE_COORD_UNITS][4]; /* s, t, r, q */
- GLfloat texStepX[MAX_TEXTURE_COORD_UNITS][4];
- GLfloat texStepY[MAX_TEXTURE_COORD_UNITS][4];
- GLfixed intTex[2], intTexStep[2]; /* s, t only */
- GLfloat var[MAX_VARYING][4];
- GLfloat varStepX[MAX_VARYING][4];
- GLfloat varStepY[MAX_VARYING][4];
-
- /* partial derivatives wrt X and Y. */
- GLfloat dzdx, dzdy;
- GLfloat w, dwdx, dwdy;
- GLfloat drdx, drdy;
- GLfloat dgdx, dgdy;
- GLfloat dbdx, dbdy;
- GLfloat dadx, dady;
- GLfloat dsrdx, dsrdy;
- GLfloat dsgdx, dsgdy;
- GLfloat dsbdx, dsbdy;
- GLfloat dfogdx, dfogdy;
-
- /**
- * This bitmask (of \link SpanFlags SPAN_* flags\endlink) indicates
- * which of the fragment arrays in the span_arrays struct are relevant.
- */
- GLbitfield arrayMask;
-
- /**
- * We store the arrays of fragment values in a separate struct so
- * that we can allocate sw_span structs on the stack without using
- * a lot of memory. The span_arrays struct is about 1.4MB while the
- * sw_span struct is only about 512 bytes.
- */
- SWspanarrays *array;
-} SWspan;
-
-
-
-#define INIT_SPAN(S, PRIMITIVE, END, INTERP_MASK, ARRAY_MASK) \
-do { \
- (S).primitive = (PRIMITIVE); \
- (S).interpMask = (INTERP_MASK); \
- (S).arrayMask = (ARRAY_MASK); \
- (S).start = 0; \
- (S).end = (END); \
- (S).facing = 0; \
- (S).array = SWRAST_CONTEXT(ctx)->SpanArrays; \
-} while (0)
+#include "s_span.h"
typedef void (*texture_sample_func)(GLcontext *ctx,
GLuint face, GLuint level);
-/** \defgroup Bitmasks
+/**
+ * \defgroup Bitmasks
* Bitmasks to indicate which rasterization options are enabled
* (RasterMask)
*/
* _swrast_validate_derived():
*/
GLbitfield _RasterMask;
- GLfloat _BackfaceSign;
+ GLfloat _BackfaceSign; /** +1 or -1 */
+ GLfloat _BackfaceCullSign; /** +1, 0, or -1 */
GLboolean _PreferPixelFog; /* Compute fog blend factor per fragment? */
GLboolean _AnyTextureCombine;
GLboolean _FogEnabled;
+ GLboolean _DeferredTexture;
GLenum _FogMode; /* either GL_FOG_MODE or fragment program's fog mode */
+ /** List/array of the fragment attributes to interpolate */
+ GLuint _ActiveAttribs[FRAG_ATTRIB_MAX];
+ /** Same info, but as a bitmask */
+ GLbitfield _ActiveAttribMask;
+ /** Number of fragment attributes to interpolate */
+ GLuint _NumActiveAttribs;
+ /** Indicates how each attrib is to be interpolated (lines/tris) */
+ GLenum _InterpMode[FRAG_ATTRIB_MAX]; /* GL_FLAT or GL_SMOOTH (for now) */
+
/* Accum buffer temporaries.
*/
GLboolean _IntegerAccumMode; /**< Storing unscaled integers? */
/* Working values:
*/
GLuint StippleCounter; /**< Line stipple counter */
+ GLuint PointLineFacing;
GLbitfield NewState;
GLuint StateChanges;
GLenum Primitive; /* current primitive being drawn (ala glBegin) */
validate_texture_image_func ValidateTextureImage;
+ /** State used during execution of fragment programs */
+ struct gl_program_machine FragProgMachine;
+
} SWcontext;
extern void
_swrast_validate_derived( GLcontext *ctx );
+extern void
+_swrast_update_texture_samplers(GLcontext *ctx);
+
#define SWRAST_CONTEXT(ctx) ((SWcontext *)ctx->swrast_context)
#define FixedToChan(X) FixedToInt(X)
#endif
+
+/**
+ * For looping over fragment attributes in the pointe, line
+ * triangle rasterizers.
+ */
+#define ATTRIB_LOOP_BEGIN \
+ { \
+ GLuint a; \
+ for (a = 0; a < swrast->_NumActiveAttribs; a++) { \
+ const GLuint attr = swrast->_ActiveAttribs[a];
+
+#define ATTRIB_LOOP_END } }
+
+
+
#endif