# ========================================================================
# default module imports
-import os
+import getopt
+import os.path
import sys
-import time
-import math
-
-# project module imports
-from interface_decl import *
-from interface_def import *
-from parse import *
-from wire_def import *
-from actual_pinmux import *
-
-if not os.path.exists("bsv_src"):
- os.makedirs("bsv_src")
-
-bsv_file = open("./bsv_src/pinmux.bsv", "w")
-
-
-header = '''
-/*
- This BSV file has been generated by the PinMux tool available at:
- https://bitbucket.org/casl/pinmux.
-
- Authors: Neel Gala, Luke
- Date of generation: ''' + time.strftime("%c") + '''
-*/
-package pinmux;
-
- typedef struct{
- Bit#(1) outputval; // output from core to pad bit7
- Bit#(1) output_en; // output enable from core to pad bit6
- Bit#(1) input_en; // input enable from core to io_cell bit5
- Bit#(1) pullup_en; // pullup enable from core to io_cell bit4
- Bit#(1) pulldown_en; // pulldown enable from core to io_cell bit3
- Bit#(1) drivestrength; // drivestrength from core to io_cell bit2
- Bit#(1) pushpull_en; // pushpull enable from core to io_cell bit1
- Bit#(1) opendrain_en; // opendrain enable form core to io_cell bit0
- } GenericIOType deriving(Eq,Bits,FShow);
-
- interface Ifc_pinmux;
-'''
-footer = '''
- endmodule
-endpackage
-'''
-# ============================================#
-# ==== populating the file with the code =====#
-# ============================================#
-
-# package and interface declaration followed by the generic io_cell definition
-bsv_file.write(header)
-
-bsv_file.write('''
-
- // declare the method which will capture the user pin-mux
- // selection values.The width of the input is dependent on the number
- // of muxes happening per IO. For now we have a generalized width
- // where each IO will have the same number of muxes.''')
-
-for cell in muxed_cells:
- bsv_file.write(mux_interface.format(cell[0],
- int(math.log(len(cell) - 1, 2))))
-
-bsv_file.write('''
-
- // declare the interface to the IO cells.
- // Each IO cell will have 8 input field (output from pin mux
- // and on output field (input to pinmux)''')
-for i in range(0, N_IO):
- bsv_file.write('''\n // interface for IO CEll-{0}''')
- bsv_file.write(io_interface.format(i))
-# ==============================================================
-
-# == create method definitions for all peripheral interfaces ==#
-for i in range(0, N_UART):
- bsv_file.write('''
- // interface declaration between UART-{0} and pinmux'''.format(i))
- bsv_file.write(uartinterface_decl.format(i))
-
-for i in range(0, N_SPI):
- bsv_file.write('''
- // interface declaration between SPI-{0} and pinmux'''.format(i))
- bsv_file.write(spiinterface_decl.format(i))
-
-for i in range(0, N_TWI):
- bsv_file.write('''
- // interface declaration between TWI-{0} and pinmux'''.format(i))
- bsv_file.write(twiinterface_decl.format(i))
-
-for i in range(0, N_SD):
- bsv_file.write('''
- // interface declaration between SD-{0} and pinmux'''.format(i))
- bsv_file.write(sdinterface_decl.format(i))
-# ==============================================================
-
-# ===== finish interface definition and start module definition=======
-bsv_file.write('''
- endinterface
- (*synthesize*)
- module mkpinmux(Ifc_pinmux);
-''')
-# ====================================================================
-
-# ======================= create wire and registers =================#
-bsv_file.write('''
- // the followins wires capture the pin-mux selection
- // values for each mux assigned to a CELL
+from spec import modules, specgen, dummytest
+
+
+def printhelp():
+ print ('''pinmux_generator.py [-o outputdir] [-v|--validate] [-h|--help]
+ [-t outputtype] [-s|--spec spec]
+ -s | spec : generate from spec (python module)
+ -t | outputtype : outputtype, defaults to bsv
+ -o outputdir : defaults to bsv_src. also location for reading pinmux.txt
+ interfaces.txt and *.txt
+ -v | --validate : runs some validation on the pinmux
+ -h | --help : this help message
''')
-for cell in muxed_cells:
- bsv_file.write(muxwire.format(cell[0], int(math.log(len(cell) - 1, 2))))
-bsv_file.write(
- '''\n // following wires capture the values sent to the IO Cell''')
-for i in range(0, N_IO):
- bsv_file.write(generic_io.format(i))
-
-for i in range(0, N_UART):
- bsv_file.write(
- '''\n // following wires capture signals to IO CELL if uart-{0} is
- // allotted to it'''.format(i))
- bsv_file.write(uartwires.format(i))
-
-for i in range(0, N_SPI):
- bsv_file.write(
- '''\n // following wires capture signals to IO CELL if spi-{0} is
- // allotted to it'''.format(i))
- bsv_file.write(spiwires.format(i))
-
-for i in range(0, N_TWI):
- bsv_file.write(
- '''\n // following wires capture signals to IO CELL if twi-{0} is
- // allotted to it'''.format(i))
- bsv_file.write(twiwires.format(i))
-
-for i in range(0, N_SD):
- bsv_file.write(
- '''\n // following wires capture signals to IO CELL if sd-{0} is
- // allotted to it'''.format(i))
- bsv_file.write(sdwires.format(i))
-bsv_file.write("\n")
-# ====================================================================
-# ========================= Actual pinmuxing ========================#
-bsv_file.write('''
- /*====== This where the muxing starts for each io-cell======*/
-''')
-bsv_file.write(pinmux)
-bsv_file.write('''
- /*============================================================*/
-''')
-# ====================================================================
-# ================= interface definitions for each method =============#
-for cell in muxed_cells:
- bsv_file.write(mux_interface_def.format(cell[0],
- int(math.log(len(cell) - 1, 2))))
-for i in range(0, N_IO):
- bsv_file.write(io_interface_def.format(i))
-for i in range(0, N_UART):
- bsv_file.write(uartinterface_def.format(i))
-for i in range(0, N_SPI):
- bsv_file.write(spiinterface_def.format(i))
-for i in range(0, N_TWI):
- bsv_file.write(twiinterface_def.format(i))
-for i in range(0, N_SD):
- bsv_file.write(sdinterface_def.format(i))
-bsv_file.write(footer)
-print("BSV file successfully generated: bsv_src/pinmux.bsv")
-# ======================================================================
-bsv_file.close()
+if __name__ == '__main__':
+ try:
+ options, remainder = getopt.getopt(
+ sys.argv[1:],
+ 'o:vht:s:',
+ ['output=',
+ 'validate',
+ 'test',
+ 'outputtype=',
+ 'spec=',
+ 'help',
+ 'version=',
+ ])
+ except getopt.GetoptError as err:
+ print ("ERROR: %s" % str(err))
+ printhelp()
+ sys.exit(1)
+
+ output_type = 'bsv'
+ output_dir = None
+ validate = False
+ spec = None
+ pinspec = None
+ testing = False
+ for opt, arg in options:
+ if opt in ('-o', '--output'):
+ output_dir = arg
+ elif opt in ('-s', '--spec'):
+ pinspec = arg
+ elif opt in ('-t', '--outputtype'):
+ output_type = arg
+ elif opt in ('-v', '--validate'):
+ validate = True
+ elif opt in ('--test',):
+ testing = True
+ elif opt in ('-h', '--help'):
+ printhelp()
+ sys.exit(0)
+
+ if pinspec:
+ if pinspec not in modules:
+ print ("ERROR: spec type '%s' does not exist" % pinspec)
+ printhelp()
+ sys.exit(1)
+ module = modules[pinspec]
+
+ fname = os.path.join(output_dir or '', "%s.mdwn" % pinspec)
+ d = os.path.split(fname)[0]
+ if not os.path.exists(d):
+ os.makedirs(d)
+ with open(fname, "w") as of:
+ ps = module.pinspec()
+ pinout, bankspec, pinspec, fixedpins = ps.write(of)
+ if testing:
+ dummytest(ps, output_dir, output_type)
+ else:
+ specgen(of, output_dir, pinout,
+ bankspec, ps.muxwidths, pinspec, fixedpins, ps.fastbus)
+ else:
+ if output_type == 'bsv':
+ from bsv.pinmux_generator import pinmuxgen as gentypes
+ elif output_type == 'myhdl':
+ from myhdlgen.pinmux_generator import pinmuxgen as gentypes
+ else:
+ print ("ERROR: output type '%s' does not exist" % output_type)
+ printhelp()
+ sys.exit(0)
+
+ gentypes(output_dir, validate)